wifi: fill in MODULE_DESCRIPTION()s for mt76 drivers

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the MediaTek mt76 drivers.

Here is a sorted list of descriptions. It might make the reviewing
process easier.

MODULE_DESCRIPTION("MediaTek MT7603E and MT76x8 wireless driver");
MODULE_DESCRIPTION("MediaTek MT7615E and MT7663E wireless driver");
MODULE_DESCRIPTION("MediaTek MT7615E MMIO helpers");
MODULE_DESCRIPTION("MediaTek MT7663 SDIO/USB helpers");
MODULE_DESCRIPTION("MediaTek MT7663S (SDIO) wireless driver");
MODULE_DESCRIPTION("MediaTek MT7663U (USB) wireless driver");
MODULE_DESCRIPTION("MediaTek MT76x02 helpers");
MODULE_DESCRIPTION("MediaTek MT76x02 MCU helpers");
MODULE_DESCRIPTION("MediaTek MT76x0E (PCIe) wireless driver");
MODULE_DESCRIPTION("MediaTek MT76x0U (USB) wireless driver");
MODULE_DESCRIPTION("MediaTek MT76x2 EEPROM helpers");
MODULE_DESCRIPTION("MediaTek MT76x2E (PCIe) wireless driver");
MODULE_DESCRIPTION("MediaTek MT76x2U (USB) wireless driver");
MODULE_DESCRIPTION("MediaTek MT76x connac layer helpers");
MODULE_DESCRIPTION("MediaTek MT76x EEPROM helpers");
MODULE_DESCRIPTION("MediaTek MT76x helpers");
MODULE_DESCRIPTION("MediaTek MT76x SDIO helpers");
MODULE_DESCRIPTION("MediaTek MT76x USB helpers");
MODULE_DESCRIPTION("MediaTek MT7915E MMIO helpers");
MODULE_DESCRIPTION("MediaTek MT7921 core driver");
MODULE_DESCRIPTION("MediaTek MT7921E (PCIe) wireless driver");
MODULE_DESCRIPTION("MediaTek MT7921S (SDIO) wireless driver");
MODULE_DESCRIPTION("MediaTek MT7921U (USB) wireless driver");
MODULE_DESCRIPTION("MediaTek MT7925 core driver");
MODULE_DESCRIPTION("MediaTek MT7925E (PCIe) wireless driver");
MODULE_DESCRIPTION("MediaTek MT7925U (USB) wireless driver");
MODULE_DESCRIPTION("MediaTek MT792x core driver");
MODULE_DESCRIPTION("MediaTek MT792x USB helpers");
MODULE_DESCRIPTION("MediaTek MT7996 MMIO helpers");

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240130104243.3025393-10-leitao@debian.org

wifi: mt76: mt76x02: simplify struct mt76x02_rate_power

- remove stbc, because mt76x0 doesn't support it and mt76x2 uses the same
values as HT/VHT
- reduce vht array to 2 elements, because VHT MCS0-7 are the same as HT

Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: move mt76_rate_power from core to mt76x02 driver code

Its layout and code is mt76x02 specific

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76x0: correct VHT MCS 8/9 tx power eeprom offset

Appears to have incorrectly offset 0x120 + 0x12 instead of 12 decimal,
leading to bogus power values being used.

Signed-off-by: Richard Huynh <voxlympha@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76x0: use dev_debug instead of dev_err for hw_rf_ctrl

BIT(0) in MT_EE_NIC_CONF_1 is use to notify the driver if the radio RF
switch is controlled through a gpio. Use dev_debug instead of dev_err
to log this info.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move hw mac_addr in mt76_phy

This is a preliminary patch to properly support mt7915 dbdc

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move band capabilities in mt76_phy

This is a preliminary patch to move properly support mt7915 dbdc

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move channel state to struct mt76_phy

Add support for an extra wiphy in mt76_set_channel and mt76_get_survey
This is preparation for supporting multiple wiphys per device to support the
concurrent dual-band feature of MT7615D

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76x0: fix default mac address overwrite

Current implementation always use default eeprom mac address to
configure device registers even if it is updated using
mt76_eeprom_override. Fix it initializing macaddr filed of mt76_dev data
structure with eeprom mac address and running mt76_eeprom_override
before mt76x02_mac_setaddr

Fixes: d1bc9bf2072c ("mt76: mt76x0: eeprom: add support for MAC address from OF")
Tested-by: Kevin Schmidt <kevin.patrick.schmidt@googlemail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

mt76: mt76x0: eeprom: add support for MAC address from OF

mt76x0e driver only supports MAC addresses from
calibration data eeprom. Many routers however do not
have a valid stock address set in this field.

This patch makes it possible to take a MAC address
from OF (e.g. from mtd).

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[adjusted for kernel submission]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76x0e: make array mt76x0_chan_map static const, makes object smaller

Don't populate the array mt76x0_chan_map on the stack but instead make it
static const. Makes the object code smaller by 80 bytes.

Before:
text data bss dec hex filename
7685 1192 0 8877 22ad mediatek/mt76/mt76x0/eeprom.o

After:
text data bss dec hex filename
7541 1256 0 8797 225d mediatek/mt76/mt76x0/eeprom.o

(gcc version 9.2.1, amd64)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76x0e: disable 5GHz band for MT7630E

MT7630E hardware does support 5GHz, but we do not properly configure phy
for 5GHz channels. Scanning at this band not only do not show any APs
but also can hang the firmware.

Since vendor reference driver do not support 5GHz we don't know how
properly configure 5GHz channels. So disable this band for MT7630E .

Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mt76x0: init: introduce mt76x0_init_txpower routine

Add mt76x0_init_txpower in order to initialize max_power per channel
at device bootstrap. Modify mt76x0_get_tx_power_per_rate and
mt76x0_get_power_info signature in order to compute tx power for
non-operating channels

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x0: eeprom: fix VHT mcs{8,9} rate power offset

Fix rate power configuration for VHT mcs 8 and 9 in
mt76x0_get_tx_power_per_rate. Moreover use the rate power
offset used for HT/VHT mcs 6 even for HT/VHT mcs 7

Fixes: b37bbc8c8251 ("mt76x0: remove eeprom dependency from mt76x0_set_tx_power_per_rate")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x0: eeprom: fix chan_vs_power map in mt76x0_get_power_info

Report correct eeprom per channel power value.
Fix chan_vs_power map in mt76x0_get_power_info routine

Fixes: f2a2e819d672 ("mt76x0: remove eeprom dependency from mt76x0_get_power_info")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

mt76x0: phy: use tssi reported value to configure tx power if available

Use tssi calibrated value to configure tx power gain if tssi is enabled
in eeprom data

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move mt76x02_init_device in mt76x02-lib module

Move mt76x02_init_device routine in mt76x02_util.c in order to be
reused by mt76x0 driver and remove duplicated code. Move interface
combo definition supported by the driver in mt76x02_init_device routine

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x0: eeprom: introduce mt76x0_tssi_enabled routine

Add mt76x0_tssi_enabled in order to check if tssi compensation
is enabled since mt76x0 condition differs from mt76x2 one.
Moreover move back mt76x02_temp_tx_alc_enabled and mt76x02_tssi_enabled
routines in mt76x2/eeprom.h since they are mt76x2 specific

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: use mt76x02_dev instead of mt76_dev in mt76x02_eeprom.c

Use mt76x02_dev data structure as reference in mt76x02_eeprom.c
instead of mt76_dev

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mac.c

Use mt76x02_dev data structure as reference in mt76x02_mac.c
instead of mt76_dev

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x0: merge mt76x0_dev in mt76x02_dev

Merge mt76x0_dev data structure in mt76x02_dev one and remove
duplicated code. Remove unused definition in mt76x0.h.
Moreover merge mt76x0_caldata and mt76x02_rx_freq_cal data structures.
This is a preliminary patch for rxwi unification.

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x0: eeprom: load eeprom data from mtd by default

Read eeprom data from mtd memory by default and fall-back
to efuse if it fails

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move set_{tx,rx}_path routines in mt76x02-lib module

Move mt76x02_phy_set_rxpath and mt76x02_phy_tx_dac routines in
mt76x02_phy.c since they are shared between mt76x2 and mt76x0 drivers.
Moreover move chainmask variable from mt76x2/mt76x0 to mt76_dev data
structure

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x0: add quirk to disable 2.4GHz band for Archer T1U

TP-LINK Archer T1U do not support 2.4GHz band despite EEPROM
reports that. Add quirk to mask out 2.4GHz support.

Reported-by: Sid Hayn <sidhayn@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: include linux/module.h in files using MODULE_*

Fix source files using MODULE_* macros without including linux/module.h

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x0: remove eeprom dependency from mt76x0_get_power_info

In order to unify eeprom parsing between mt76x0 and mt76x2 drivers,
remove eeprom pointer dependency from mt76x0_get_power_info routine.
Remove mt76x0_eeprom_params since it is now an empty structure

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x0: remove eeprom dependency from mt76x0_set_tx_power_per_rate

In order to unify eeprom parsing between mt76x0 and mt76x2 drivers,
remove eeprom pointer dependency from mt76x0_set_tx_power_per_rate.
Moreover use mt76_rate_power to store power vs rate calibration data.

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x0: unify parse hw capabilities

Unify parse hw capabilities with mt76x2 driver using
mt76x02_eeprom_parse_hw_cap utility routine available
in mt76x02-lib module

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x0: unify freq offset parsing

Unify frequency offset parsing with mt76x2 driver using
eeprom utility routines available in mt76x02-lib module

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x0: unify temperature offset parsing

Unify temperature offset parsing with mt76x2 driver using
eeprom utility routines available in mt76x02-lib module

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x0: unify rssi_offset parsing

Unify rssi_offset parsing with mt76x2 driver using eeprom utility
routines available in mt76x02-lib module

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x0: unify lna_gain parsing

Unify lna gain parsing with mt76x2 driver using eeprom utility
routines available in mt76x02-lib module

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x0: remove mt76x0_set_country_reg routine

Remove mt76x0_set_country_reg routine for the moment
since it is partial and it is not actually used

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move mt76x2_ext_pa_enabled routine in mt76x02_eeprom.c

Move mt76x2_ext_pa_enabled utility routine in mt76x02_eeprom.c
and remove duplicated code. This is a preliminary patch to
unify eeprom code between mt76x2 and mt76x0 driver

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move mt76x2_get_efuse_data in mt76x02-lib module

Move mt76x2_efuse_read and mt76x2_get_efuse_data in mt76x02_eeprom.c
in order to be reused in mt76x0 driver for eeprom parsing

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move mt76x02_mac_setaddr in mt76x02-lib module

Move mt76x02_mac_setaddr utility routine in mt76x02-lib
module and remove duplicated code. This is a preliminary patch
to unify eeprom code between mt76x2 and mt76x0 driver

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move eeprom utility routines in mt76x02_eeprom.h

Move shared eeprom utility routines in mt76x02_eeprom.h and
remove duplicated code

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move common eeprom definitions in mt76x02-lib module

Move mt76x2 and mt76x0 common definitions in mt76x02_eeprom.h
and remove duplicated code

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x0: inital split between pci and usb

For now pci driver can read ASIC version from the device :-)

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x0: use mt76_register_device for device registration

Use mt76_register_device routine for device registration.
mt76_register_device allows to enable VHT support on 5GHz band.
Overwrite unsupported vht features with mt76x0_vht_cap_mask routine.
Remove macaddr field of mt76x0_dev data structure and
use the mt76_dev one. Moreover remove following unused routines:
- mt76_init_sband
- mt76_init_sband_2g
- mt76_init_sband_5g

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x0: remove has_{2,5}ghz fields of mt76x0_eeprom_params

Remove has_2ghz/has_5ghz fields of mt76x0_eeprom_params data
structure and use mt76_dev ones. This is a preliminary patch
to use shared routines for device allocation

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x0: Remove VLA usage

Even with "const" variables, the compiler will generate warnings about
VLA usage. In the quest to remove all VLAs from the kernel[1], this uses
a #define instead of a const to do the array sizing.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com

Fixes: e87b5039511a ("mt76x0: eeprom files")
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

mt76x0: correct type for eeprom gain value

Change type to u8 to allow sanity check agaist 0xff;

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: e87b5039511a ("mt76x0: eeprom files")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

mt76x0: eeprom files

Add eeprom files of mt76x0 driver.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>