mt76: move hw mac_addr in mt76_phy

This is a preliminary patch to properly support mt7915 dbdc

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move band capabilities in mt76_phy

This is a preliminary patch to move properly support mt7915 dbdc

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7603: add additional EEPROM chip ID

Some newer MT7628 based routers (notably the TP-Link Archer C50 v4) are
shipped with a chip-id of 0x7600 in the on-flash EEPROM. Add this as a
possible valid ID.

Ref: https://bugs.openwrt.org/index.php?do=details&task_id=2781

Suggested-by: Ron Asimi <ron.asimi@gmail.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7603: check for single-stream EEPROM configuration

Some devices using MT7628 or MT7603 have only one antenna chain connected.
Detect these using the EEPROM rx/tx path settings

Reported-by: Qin Wei <me@vonger.cn>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7603: disable merge of OTP ROM data by default

The reference driver does not seem to enable it by default, only under certain
conditions, e.g. when a .bin file is loaded.
Make it opt-in via a device tree property for now, in case it is needed on some
boards.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7603: fix some checkpatch warnings

This fixes the following checkpatch warnings:

WARNING: Improper SPDX comment style
CHECK: No space is necessary after a cast

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: add driver for MT7603E and MT7628/7688

This driver is for a newer generation of 2x2 MediaTek 802.11n chipsets.
MT7603E is a PCIe chip.
MT7628 and MT7688 are MIPS SoC devices with built-in WLAN.
MT7688 is limited to 1x1

This driver fully supports AP, station, mesh, ad-hoc and monitor mode.

Signed-off-by: Felix Fietkau <nbd@nbd.name>