wifi: iwlwifi: remove 'use_tfh' config to fix crash

This is equivalent to 'gen2', and it was always confusing to have
two identical config entries. The split config patch actually had
been originally developed after removing 'use_tfh" and didn't add
the use_tfh in the new configs as they'd later been copied to the
new files. Thus the easiest way to fix the init crash here now is
to just remove use_tfh (which is erroneously unset in most of the
configs now) and use 'gen2' in the code instead.

There's possibly still an unwind error in iwl_txq_gen2_init() as
it crashes if TXQ 0 fails to initialize, but we can deal with it
later since the original failure is due to the use_tfh confusion.

Tested-by: Xi Ruoyao <xry111@xry111.site>
Reported-and-tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Reported-and-tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217622
Link: https://lore.kernel.org/all/9274d9bd3d080a457649ff5addcc1726f08ef5b2.camel@xry111.site/
Link: https://lore.kernel.org/all/CAAJw_Zug6VCS5ZqTWaFSr9sd85k%3DtyPm9DEE%2BmV%3DAKoECZM%2BsQ@mail.gmail.com/
Fixes: 19898ce9cf8a ("wifi: iwlwifi: split 22000.c into multiple files")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230710145038.84186-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

wifi: iwlwifi: cfg: remove trailing dash from FW_PRE constants

We have the trailing dash here, but that complicates all
the code. Simplify this by removing the dashes, adding
them to the *_MODULE_FIRMWARE macros, and adjusting the
code using this accordingly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621130443.72240ca13b83.I1f4ed547f0964719ed98a3ef928080462d594491@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: remove support for *nJ devices

These are test chips that will never reach anyone
outside of Intel, so remove support for them.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621130443.d9f4e0356ae4.If9eccc22eb500dfff8973a70a649d94af7a60841@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: don't load old firmware for 22000

The earliest firmware released for these products is with
API version 50, so there's no point in trying to load any
versions before that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621130443.768186c0475d.I7de717072221712176a3085d71c8018ae0348db8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: split 22000.c into multiple files

Split the configuration list in 22000.c into four new files,
per new device family, so we don't have this huge unusable
file. Yes, this duplicates a few small things, but that's
still much better than what we have now.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621130443.7543603b2ee7.Ia8dd54216d341ef1ddc0531f2c9aa30d30536a5d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: Add support for new CNVi (SC)

Add support for the new Integrated Connectivity (CNVi)
and Companion RF (CRF) versions and their combinations
to handle new devices.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621130443.716fd707e847.I34f6ffd61e3210c926868a3e961b16d1742bba29@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: Add support for new Bz version

Add support for the new version of the Bz CNVI device.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621130443.82d436d5f346.I0154c202c5d895cb002a2b7c827b9536e81a84b5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: bump FW API to 81 for AX devices

Start supporting API version 81 for AX devices.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230615094410.e61fdc474d89.I3d9823231fa7fc47158b8aa3561b43822c8c86cd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: support version C0 of BZ and GL devices

Add support for C0 version of MAC and RF for BZ and GL devices.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.90ad8aab8a03.I86d1675095f0e4f5286d9b7c2b00a0220f524472@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: bump FW API to 79 for AX devices

Start supporting API version 79 for AX devices.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.c54013425732.I4df33c68ee3ef6b6a330f1cbef7f5bbf4f54b269@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: cfg: freeze 22500 devices FW API

FW version is now frozen for 22500 devices. Don't
allow newer versions in the driver.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.8a25ebf9134c.I3f1454498322ce28cb687d28c091c7ee092cefca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: Update support for b0 version

Add support for B0 version of MAC of MR device

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230418122405.5dca1ea7a0cf.I87932e1e216a1940eeae8824071ecb777f4c034f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: bump FW API to 78 for AX devices

Start supporting API version 78 for AX devices.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.5a4dcbf5a2c1.I125808566fe892ee0865e392bf1b1872daafe8ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: bump FW API to 77 for AX devices

Start supporting API version 77 for AX devices.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.e522ccefe354.If7628363fafeb7687163103e734206915c445197@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: Add RF Step Type for BZ device

Add RF step id handling and handle for BZ device.
Read CNV Aux register and uses for no OTP case.
Add missing rf support for Bz/Bnj device and correct/add
the mapping for rf-type if OTP not present.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.8f2e2fff7bbc.Iee5554178bc5f134dcc28591db0968e619afbdca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: bump FW API to 75 for AX devices

Start supporting API version 75 for AX devices.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100040.f08a27944fc6.Iafe3a2db2b91072a559038b85eca7b6b322be3ff@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: Update configurations for Bnj device

Add missing rf support for spacific rf for BnJ device

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230320122330.eeb7ebb9ed87.I30c3938221aeb6f6ba2c84b1a77eea54c9dd3ba1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: Update configurations for Bnj and Bz devices

Add missing rf support for Bz device and B-Step for BnJ device

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230314194113.14c373dcfe15.I96b96a8b149ac181e962f4b82e0d15b172823d0f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: yoyo: Add driver defined dump file name

Add driver defined dump file name extension for beacon loss
and FW Assert case.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230314194113.2a2ee92995e9.I38fff588e32276796cd757309fc811241f827c7a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: Add support for B step of BnJ-Fm4

Support new HW step of BnJ-Fm4 device

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230305124407.bb0591c59898.If04d7a45707ba008981f8c8ea7f7f107880f146c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: bump FW API to 74 for AX devices

Start supporting API version 74 for AX devices.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Link: https://lore.kernel.org/r/20230127002430.80012ee4c5d6.I45ba1f8bf923d242ef2ffeb160d736120c8add65@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>

wifi: iwlwifi: cfg: disable STBC for BL step A devices

The A step of BL devices doesn't support STBC, so we need to disable
it.

Create new HT params and a macro to use specifically with BL A-step
devices where STBC is disabled.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20221102165239.806dbfa53f40.I4b14a8be30795bdcd73686bd1f9222e7ab93b505@changeid

wifi: iwlwifi: mvm: use old checksum for Bz A-step

For Bz A-step hardware, the checksum offload is broken and
we need to use the old way, which is still there. Do that,
which requires taking the checksum capability bits out of
the IWL_DEVICE_BZ macro and listing them individually.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20221102165239.6bc379f1b0b1.I204223f1b1c2fe26f414aea6679ef7fce681c33a@changeid

wifi: iwlwifi: cfg: remove IWL_DEVICE_BZ_COMMON macro

We only have a single use of this inside the IWL_DEVICE_BZ
macro, so just combine the contents here.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220906161827.23d6c92e9a11.I4a11928a6d698079dc742e3ba3d3ce6fd7a878d1@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>

wifi: iwlwifi: pcie: add support for BZ devices

Add support in BZ-FM and BZ-GL devices. Adjust current structs
steps to differ between the new devices.

Signed-off-by: Yaara Baruch <yaara.baruch@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220906161827.0b7fc8487039.I984dcb58272e2f38c835e7aaa7e1ac646bc2f65e@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>

iwlwifi: bump FW API to 72 for AX devices

Start supporting API version 72 for AX devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.8de72a8ea67f.I66681363afeb34c619379a5989090264fe6b5f2a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: add support for IMR based on platform

Driver needs to enable IMR which is needed for debug on
certain platforms, so add a device config flag to set it.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.0b96b2760503.I08bc741c8c497a2edbe4784cdab6abd8d04c62f3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 71 for AX devices

Start supporting API version 71 for AX devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.d0898482506f.I2de2f9140c23f39a837f68199bbaf15a20f26abb@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 70 for AX devices

Start supporting API version 70 for AX devices.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220205112029.a861ff3e5541.I77447cab0e944ec9e9e72e25bfd9cd59b9111f73@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: remove unused macros

Found with W=2, remove unused macros in C files. In one case
move the macro under the corresponding ifdef.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220204122220.068c6052689b.Idbb7a87c2fd93619c1765c7f4ed15190c3fef2a7@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pcie: add support for MS devices

Add MS devices to the driver. For now we are using the same FW image as MR
(since they differ only in rfid), but it should change in the future.

Signed-off-by: Yaara Baruch <yaara.baruch@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.a82ca9207ace.I38aa0acfb7846b179027b6f87f5f88f8e4177f63@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: yoyo: fix DBGI_SRAM ini dump header.

DBGI SRAM is new type of monitor, therefore it should be
dump as monitor type with ini dump monitor header.

Signed-off-by: Rotem Saado <rotem.saado@intel.com>
Fixes: 89639e06d0f3 ("iwlwifi: yoyo: support for new DBGI_SRAM region")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.6c31f6a2dcfc.If311c1d548bc5f7157a449e848ea01f71f5592eb@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: cfg: add support for 1K BA queue

In order to support 1K aggregations start ba queue with at least double
the size, also allocate based on the connecting type to save memory
usage.

Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220128153014.16b43fe3e92f.I853c57648feee4b69ccb01ef4c75354377d60be2@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: support Bz TX checksum offload

Support TX checksum offload for Bz devices, where we have full
checksum offload (NETIF_F_HW_CSUM) and the hardware doesn't
need to parse the IP headers or anything.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.c0f44c98b36d.I75a688f3ac80cbe824c459ece4bb67843b9fce76@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 69 for AX devices

Start supporting API version 69 for AX devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.7d8fe0dffaea.I2de65c1efd9ab464d4158a3d852f73efe63024f8@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: add support for BNJ HW

Add support for BNJ HW with GF, GF4, HR1, FM and FM4 RF modules

Signed-off-by: Mike Golant <michael.golant@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210090244.e94c1f921245.I8cba209b1366dc0636a04711fc6a85539ca878d0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: Fix FW name for gl

Fix FW name for gl use the crf fm and not fm7, since the
later no longer exists.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204174546.497b2f2c587d.If71fa8cbed043c15f927bb78cb8a695625a362dd@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 68 for AX devices

Start supporting API version 68 for AX devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204174545.695e3db16cf5.Ie94a3ad1c7a300cff7ecde26a732779159ec919e@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: swap 1650i and 1650s killer struct names

The names of the killer 1650i and 1650s devices weren't aligned.
This patch swap the names in the structs.

Signed-off-by: Yaara Baruch <yaara.baruch@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204130722.4e992a115f14.Icacedcc06f33e5457f650290e7deea22bf1ca12d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: remove unused iwlax210_2ax_cfg_so_hr_a0 structure

We don't use this structure anymore, except for a check that will
never match, so we can remove this structure entirely.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204083238.c41548abd174.I6bb4f6058fd85e1dd92cd056b6eaca1cb4aa74a3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: add support for Bz-Z HW

Add support for Bz Z step HW with GF RF.

Signed-off-by: Mike Golant <michael.golant@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204083238.fc8626515758.Ibfeffc8bb071f9773ea189992ebef056f51be1be@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 67 for AX devices

Start supporting API version 67 for AX devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024181719.3c0af5832d23.I7c18858604b72bc15cf2047a91531e4aa7c0527a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: add new killer devices to the driver

Add 1550, 1675 and 1690 killer devices to the driver.

Signed-off-by: Yaara Baruch <yaara.baruch@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017165728.9a3d01b8c4e9.I9720afa0a6ea72f94ed4a3f3cf88294174ab905b@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: Add support for more BZ HWs

Add support for GA and for BZ with FM rf.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210826224715.64ab5278fb9f.I4f2a547dc04c3d14cacdbc739da0b056fc04923d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: cfg: set low-latency-xtal for some integrated So devices

The integrated So devices covered by the iwl_so_long_latency_trans_cfg
configuration should all have low-latency-xtal enabled, so do that.
While at it, remove the TODO, I've checked the other values as well.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 6f60fb03c8e7 ("iwlwifi: move SnJ and So rules to the new tables")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20211016114029.8b5480113f53.I80b5b4ebea84e56f3b3143fc1ee7097be8b4ae78@changeid

iwlwifi: bump FW API to 66 for AX devices

Start supporting API version 66 for AX devices.

Th iwlwifi FW API is frozen every 6 weeks, so we need to bump the
newest version number that the driver supports accordingly. In this
specific case, support for new HW will only be possible with the new
FW version. This change still keeps backwards compatibility with
older FW API versions for existing devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210901101412.300012-1-luca@coelho.fi

iwlwifi: bump FW API to 65 for AX devices

Start supporting API version 65 for AX devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210819183728.1cb15b015485.I2818924b772d7518f4d9fc38b4caab3494ab11f9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: read MAC address from correct place on Bz

On Bz devices, the MAC address CSRs changed from 0x380 to 0x30.
Change the boolean configuration "mac_addr_from_csr" to hold the
base address instead, and set it correctly for the different
devices using this feature.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802215208.928c7983f014.Ic5ba92d98946c1b4640280a05dcfd75119c0f0c0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: give Bz devices their own name

The real name isn't determined yet, but give them a new
name that isn't clashing with older devices.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802215208.46b86c8074b2.I94d58b8e622ca87658dc05b05483fb954d526eab@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: split off Bz devices into their own family

These devices have some places with different behaviour
required, so split them off into their own family as they
should be.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802215208.90257303559f.I4c4342229dcb9513099a3152605f0947423e86dc@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 64 for AX devices

Start supporting API version 64 for AX devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210621103449.8144a5b7d9a7.Ibf77fd7daa7d22f7c46d1c4a572ab9441a761299@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pcie: Add support for AX231 radio module with Ma devices

Add support for AX231 radio modules, which we call Fm.
These modules can be used with the Ma family of devices
and above.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.c1fdd153d686.I7ee0485c52fb429de1fe171cb6dc0ae593a26788@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pcie: Change ma product string name

Change ma product string name to the correct name,
and to reflect the CRF and not the CNV.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411132130.c05b4c55540f.I8dd0361b033f63658999ba53640949701b048f17@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 63 for AX devices

Start supporting API version 63 for AX devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411132130.a588a9dacd98.Ie4f96b8988c2cbd5f096ee64d0eb0f4829d55aee@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: add ax201 killer device

add new killer devices configurations.

Signed-off-by: ybaruch <yaara.baruch@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.54967363d26d.I5d1a3d810cf6abace51ebb2630d62d891e9fd302@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: change name to AX 211 and 411 family

change the name of the ax211 and ax411.

Signed-off-by: ybaruch <yaara.baruch@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.fc3218805052.I203f1a802338f59955bd511c90217f63b918390b@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: change step in so-gf struct

change the step of iwlax210_2ax_cfg_so_jf_a0 to
iwlax210_2ax_cfg_so_jf_b0 as it is on the wcd_fw-dev
repository.

Signed-off-by: ybaruch <yaara.baruch@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.e9a9d1da76bc.Ie964f37872bbb88d1a02094134f9a2c38faad884@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pcie: Add support for Bz Family

Add support for different combinations of Bz
and CRFs.

Note: As of now we do not know the exact values
for ltr_delay and xtal_latency, so for now use the
worst case scenario values until the actual values
are clarified.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.caac8d996532.I6a22d6decb106cd50d7954b19236b69d685dcc39@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 62 for AX devices

Start supporting API version 62 for AX devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210172142.8c2e4ebd947e.Id1be235baad632e9ba1c07590e62184fc2f07c04@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: remove max_ht_ampdu_exponent config parameter

This always has the same value, since we don't have any
devices with different values; remove the parameter.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210171218.50d11cbb073f.Ia44d022a4c549eb5fe0254fb20c62aa8d0bba634@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pcie: add AX201 and AX211 radio modules for Ma devices

Add support for AX201 and AX211 radio modules, which we call HR2 and
GF, respectively. These modules can be used with the Ma family of
devices and above.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.f8e3080ce633.I7377b421b031796730daf809c4024a3c3ef95fa8@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: add new cards for So and Qu family

add few PCI ID'S for So with Hr and Qu with Hr in AX family.

Cc: stable@vger.kernel.org
Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210206130110.6f0c1849f7dc.I647b4d22f9468c2f34b777a4bfa445912c6f04f0@changeid

iwlwifi: bump FW API to 61 for AX devices

Start supporting API version 61 for AX devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210131201908.99428c76c1fc.I2b075d52119d7e4ced6a044f096ee1589c8e631e@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: add support for SnJ with Jf devices

Add support for SnJ devices with Jf and a workaround for some cases
where the devices erroneously show as QnJ devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210205110447.ae6ed654e557.Ic11ed4df410328359b6a2c997456692901d99468@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: move SnJ and So rules to the new tables

We were hardcoding the SnJ and So IDs already at the trans_cfg
selection, instead of doing it in a more generic way. Use the generic
trans_cfg selection for these devices and move the hardcoded IDs to
the new table.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210205110447.7e11dcb7b04e.I6f65126175d54b73834c2896013d00ce114ff601@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 60 for AX devices

Start supporting API version 60 for AX devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210205110447.7b908f5dd970.Id2aec0d7d33921aba77ba9853196f81d5950c31c@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pcie: add rules to match Qu with Hr2

Until now we have been relying on matching the PCI ID and subsystem
device ID in order to recognize Qu devices with Hr2. Add rules to
match these devices, so that we don't have to add a new rule for every
new ID we get.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.591ce253ddd8.Ia4b9cc2c535625890c6d6b560db97ee9f2d5ca3b@changeid

iwlwifi: Add a new card for MA family

Add a PCI ID for snj with mr in AX family.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.101ac3058c04.Idd28706b122cdc8103956f8e72bb062fe4adb54e@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: use SPDX tags

Use SPDX tags instead of the long copyright notices. Also cleanup
some duplicate copyright notices and combine the years where possible.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: add support for 6GHz

Add support to the 6GHz band (aka. Ultra High Band or UHB). This
allows us to scan and connect to channels in that band, including all
the relevant features, such as preferred scan channels, colocated
channels etc.

Co-developed-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Co-developed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Co-developed-by: Tova Mussai <tova.mussai@intel.com>
Signed-off-by: Tova Mussai <tova.mussai@intel.com>
Co-developed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Co-developed-by: Tali Levi Rovinsky <Tali.Levi-rovinsky@intel.com>
Signed-off-by: Tali Levi Rovinsky <Tali.Levi-rovinsky@intel.com>
Co-developed-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Co-developed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201210000657.0fdbfc3d7352.Idb648536faf21716e2ab2c6d6890d3e49f719cd3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 59 for AX devices

Start supporting API version 59 for AX devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201008181047.0359498107fe.I559b5140be6abbee5eb759ec6e5ca046f7178f8f@changeid

iwlwifi: pcie: fix the xtal latency value for a few qu devices

We were using 5 s for some qu devices, but their xtal stabilizes
much faster than that. Reduce the value to 500 ms.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201008181047.d0e2253c282f.Icd2ff00adff52f6c96fb261c34fbf129ce67a00d@changeid

iwlwifi: bump FW API to 57 for AX devices

Start supporting API version 57 for AX devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200930191738.f8660d41f62b.Iac1d5b3186e22956cfd000fd9dc5886a79617b78@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: add new cards for MA family

add few PCI ID'S for ma with gf and mr in AX family.

Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200924162105.6add94c21abe.I1aa1c5e3c2c12ce82ed30429e0ad92225ece7ce3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: add new cards for AX201 family

add few PCI ID'S for AX201 family including killer cards.

Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200911204056.21397978115f.Id2d95275a36a6bb6b226d12cb6c5a629334587db@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 56 for AX devices

Start supporting API version 56 for AX devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200529092401.aabbc5b472ee.I88cb2c3d2d07e62eac3671335ff1fb80b73c5839@changeid

iwlwifi: use longer queues for 256-BA

When we have 256 block-ack support, we may need to be very fast
to provide a lot of frames to the hardware to transmit, but that
cannot be guaranteed. Use a longer queue size to have more time,
and the next possible queue size is 1024 since it must be a power
of two.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200425130140.851866c7e4c4.I13fa678929431f1694fd202c1da40aa476ab70fe@changeid

iwlwifi: pcie: convert all AX101 devices to the device tables

Convert all Qu/Hr1 devices to the new device tables, by modifying the
corresponding structures, adding a new name and generalizing the
device recognition.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200424194456.ec0e04102d2c.Ia36f2c7bbf06cb6436424d40d6adb2376f2962ee@changeid

iwlwifi: pcie: remove occurrences of 22000 in the FW name defines

We don't use the number 22000 for our devices anymore, so remove all
occurrences of it in the FW name macros.

While at it, add IWL_QU_B_HR_B to the list of firmwares used by the
driver, which was missing.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200424194456.93cc41bdbb4d.Ib7599901888a2d050f851bd878a875f593f2e8e5@changeid

iwlwifi: pcie: convert QnJ with Hr to the device table

Convert all the occurrences of QnJ with Hr into a single entry in the
PCI device table.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200424194456.21283ca79d82.I57a493c679a56fff11417afdaec76617711ff6a9@changeid

iwlwifi: bump FW API to 55 for AX devices

Start supporting API version 55 for AX devices. We skipped 54 because
it won't be published.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200424182644.5b4628e18203.I626d3b19d84214a83cd92dc4ddf291903b0983aa@changeid

iwlwifi: pcie: add new structs for So devices with long latency

Some So devices have a longer wake latency. To support this properly,
add new cfg structs for them so the driver will inform the FW about
the need to use another xtal and use a higher wait value during state
transitions.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200418110539.daf515618f57.I80e60006b108e1586e3c56669635c670597fe08d@changeid

iwlwifi: pcie: add new structure for Qu devices with medium latency

Some Qu devices require an intermediate amount of time to wake up and
for LTR notifications, so add a new structure with the correct values
for them and change the corresponding devices to use it.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200418110539.d6df2bcee78f.Ie008b0c8f03340a466c1ef981bfd25359c9de90d@changeid

iwlwifi: mvm: tell firmware about required LTR delay

Some (integrated) devices need a longer LTR delay than the firmware
would typically apply, tell it about that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200418110539.24276ae2ad61.I8831a538f75893d5cee47b4a81f4b9b7fd0e8bea@changeid

iwlwifi: update few product names in AX family

update the product names of few structs in AX family.

Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200418110539.738dabad8732.I5673eaf8a016b8aa27ab8bab02121108fa723783@changeid

iwlwifi: add new cards for AX family

add few PCI ID'S for AX family.

Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200418110539.5eae2261b70c.I0369619a562c4e4008e2f0a3afb9ed5d4c9b49d4@changeid

iwlwifi: bump FW API to 53 for 22000 series

Start supporting API version 53 for 22000 series.

Change-Id: I5725e46394f3f53c3069723fd513cc53c7df383d
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: remove support for QnJ HR FPGA

We don't support the FPGA versions of this card combination anymore.
Remove the cfg mangling that tries to load it and all the relevant
structures.

Change-Id: I190652101afcab682cfba873d062992f11efca32
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: remove support for QnJ Hr STEP A

We don't support QnJ HR STEP A anymore. Remove the structures we used
for it.

Change-Id: I0dfd88232bdc8ff2dd9c4368b8ed9a0c40c86bc8
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: add trans_cfg for devices with long latency

A couple of SoCs, which can be recognized by PCI device IDs 0xA0F0 and
0x43F0, need a longer wait for the xtal to stabilize. To handle this,
add a new trans_cfg structure for Qu devices with a larger
xtal_latency value and apply them to the devices recognized by these
IDs. Also add a flag that allows us to inform the FW that the low
latency xtal should be used.

Change-Id: I8a14c6af45ea14d8e7f1ef38a589158f38d0c0ea
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: remove unnecessary cfg mangling for Qu C and QuZ with Jf

Now that we identify the correct cfgs with the new tables for Qu step
C and QuZ with Jf, we can remove the mangling we do later on.

Change-Id: Ic01ce67db147e897ad2424f0e05a70a00d2c620e
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: convert QnJ with Jf devices to new config table

All the QnJ devices have a similar matching to the other Qu devices,
but needs a different configuration. Convert the QnJ devices to the
new table accordingly.

Change-Id: If236ef3d0da3e605a3379922818f5897e0affd7e
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: convert all Qu with Jf devices to the new config table

Add new generic iwl_trans structures for these devices and apply the
correct cfg depending on the device characteristics.

Since we have to match Qu with IWL_CONFIG_ANY, we also need to move
the Hr devices to the new table, but for now we keep matching on PCI
device and subsystem device IDs.

Change-Id: I14e9146a99621ff11ce50bc746a4b88af508fee0
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: move integrated, extra_phy and soc_latency to trans_cfg

These values are selected based on the PCI device ID, so the decision
to use them can be made early. By moving them to the trans_cfg, we
avoid duplicating the large cfg structs for small pieces of
data (sometimes a single boolean). This will also allow us to make
more decisions based on, for instance, the SoC type in used.

The trans_cfg concept changes a bit, because previously it was used
only to boot the device before reading further characteristics and now
it also contains more data that is associated with the device ID.

Change-Id: Ib71b07ea9e322eb74571dc5e8aa58f17eece5c9c
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: move AX200 devices to the new table

Move the AX200 devices to the new table and add the appropriate cfg
struct and strings.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.fdfa5f31b8b1.Idfd28829d9f3820de06d3bba8fa66048b8d0d0b0@changeid

iwlwifi: cfg: use antenna diversity with all AX101 devices

We were erroneously only setting the tx_with_siso_diversity flag in
the Qu B-step configurations for AX101 devices, though we should do
it on all configurations. Add the flag to the other two
configurations, namely Qu C-step and QuZ.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200306151129.1cd986ef467c.Idc0b111475ae3d38b68ae062613c080b574e33e1@changeid

iwlwifi: add new iwlax411 struct for type SoSnj

Add new struct for SoSnj and add uhb support for ax411 structs.

Signed-off-by: Oren Givon <oren.givon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: remove CSR registers abstraction

We needed this abstraction for some CSR registers for
IWL_DEVICE_22560, but that has been removed, so we don't need the
abstraction anymore. Remove it.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: remove some outdated iwl22000 configurations

A few configuration structures were either not referenced anymore or
assigned to devices IDs that were not in use anymore. Remove them.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: allocate more receive buffers for HE devices

For HE-capable devices, we need to allocate more receive buffers as
there could be 256 frames aggregated into a single A-MPDU, and then
they might contain A-MSDUs as well. Until 22000 family, the devices
are able to put multiple frames into a single RB and the default RB
size is 4k, but starting from AX210 family this is no longer true.
On the other hand, those newer devices only use 2k receive buffers
(by default).

Modify the code and configuration to allocate an appropriate number
of RBs depending on the device capabilities:

* 4096 for AX210 HE devices, which use 2k buffers by default,
* 2048 for 22000 family devices which use 4k buffers by default,
* 512 for existing 9000 family devices, which doesn't really
change anything since that's the default before this patch,
* 512 also for AX210/22000 family devices that don't do HE.

Theoretically, for devices lower than AX210, we wouldn't have to
allocate that many RBs if the RB size was manually increased, but
to support that the code got more complex, and it didn't really
seem necessary as that's a use case for monitor mode only, where
hopefully the wasted memory isn't really much of a concern.

Note that AX210 devices actually support bigger than 12-bit VID,
which is required here as we want to allocate 4096 buffers plus
some for quick recycling, so adjust the code for that as well.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 52 for 22000 series

Start supporting API version 52 for 22000 series.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: 22000: fix some indentation

Somehow two tabs snuck into this file where just one should be
used, fix that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

iwlwifi: remove IWL_DEVICE_22560/IWL_DEVICE_FAMILY_22560

This is dead code, nothing uses the IWL_DEVICE_22560 macro and
thus nothing every uses IWL_DEVICE_FAMILY_22560. Remove it all.

While at it, remove some code and definitions used only in this
case, and clean up some comments/names that still refer to it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

iwlwifi: bump FW API to 51 for 22000 series

Start supporting API version 51 for 22000 series.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

iwlwifi: dbg_ini: add monitor dumping support

Allow collecting monitor data in ini debug mode.
Implement both SMEM and DRAM monitor regions dumping.
For DRAM monitor, support DBGC1, DBGC2 and DBGC3 and support several
DRAM fragments per DBGC.

Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: add support for single antenna diversity

There are products which have a single chain with 2 antennas.
In these products, we need to inform the FW that the device has the
single antenna diversity(SAD) feature. In the future, we will read
the active antenna from a BIOS configuration. Currently, we use a
default configuration which means that the FW decides which antenna to use.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: separate elements from cfg that are needed by trans_alloc

In order to be able to select the cfg depending on the HW revision or
on the RF ID, we need to set up the trans before selecting the cfg.
To do so, move the elements from cfg that are needed by
iwl_trans_alloc() to a separate struct at the top of the cfg, so it
can be used by other cfg types as well, before selecting the rest of
the configuration.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: remove unnecessary IWL_DEVICE_AX200_COMMON definition

Remove the IWL_DEVICE_AX200_COMMON definition, since it's only used
once and relies mostly on IWL_DEVICE_22000_COMMON anyway.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: remove duplicate FW string definitions

The string we define as IWL_22000_HR_B_F0_FW_PRE is duplicate with
IWL_22000_QU_B_HR_B_FW_PRE. Remove the former to avoid confusion.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 50 for 22000 series

Start supporting API version 50 for 22000 series.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 49 for 22000 series

Start supporting API version 49 for 22000 series.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pcie: handle switching killer Qu B0 NICs to C0

We need to use a different firmware for C0 versions of killer Qu NICs.
Add structures for them and handle them in the if block that detects
C0 revisions.

Additionally, instead of having an inclusive check for QnJ devices,
make the selection exclusive, so that switching to QnJ is the
exception, not the default. This prevents us from having to add all
the non-QnJ cards to an exclusion list. To do so, only go into the
QnJ block if the device has an RF ID type HR and HW revision QnJ.

Cc: stable@vger.kernel.org # 5.2
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190821171732.2266-1-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

iwlwifi: pcie: add support for qu c-step devices

Add support for C-step devices. Currently we don't have a nice way of
matching the step and choosing the proper configuration, so we need to
switch the config structs one by one.

Cc: stable@vger.kernel.org
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

iwlwifi: change 0x02F0 fw from qu to quz

change the fw of 0x02F0 platform from qu to quz

Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

iwlwifi: add new cards for 22000 and change wrong structs

add few PCI ID'S for 22000 and chainge few cards structs names

Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

iwlwifi: add new cards for 22000 and fix struct name

add few PCI ID'S for 22000 and fix the wrong name for one
of the structs

Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

iwlwifi: bump FW API to 48 for 22000 series

Start supporting API version 48 for 22000 series.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: remove unused 0x40C0 PCI device IDs

This device ID and device type was never released, so we can remove it
from the PCI IDs list.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 47 for 22000 series

Start supporting API version 47 for 22000 series. The 9000 series is
now frozen on version 46.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: cfg: use family 22560 based_params for AX210 family

Specifically, max_tfd_queue_size should be 0x10000 like in
22560 family and not 0x100 like in 22000 family.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: set 512 TX queue slots for AX210 devices

AX210 devices support 256 BA (256 MPDUs in an AMPDU).
The firmware requires that the number of TFDs will be
minimum twice as big as the BA size (2 * 256 = 512).

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: use correct GP2 register address for 22000 family

The device time register address has changed for 22000 devices.
Add a util function for getting the GP2 time and use the correct
register address depending on the device family.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: dbg_ini: add monitor header to smem monitor

Add write pointer and cycle count registers to smem monitor header.

Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: add support for quz firmwares

Add a new configuration with a new firmware name for quz devices.
And, since these devices have the same PCI device and subsystem IDs,
we need to add some code to switch from a normal qu firmware to the
quz firmware.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: for AX210 device support radio GF4

Add support for radio gf4 (CDB radio).

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: add support for 6-7 GHz channels

Add UHB (ultra high band) channels and use 16 bit variables
to fit the new channels.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: rename structs to fit the new names

rename few structs to fit the new marketing names

Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: add new cards for 22000 and killer series and change the market name

Add a few PCI ID'S for 22000 and killer series in addition to
chainging the marketing name.

Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: start using B-step for some 9000 devices

We don't support A-step for some device combinations anymore. So
change them to use B-step, renaming and reorganizing the config
structures. Additionally, fix one device that was using the wrong
configuration.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: align to new periphery address space for AX210 family

In AX210 family, UMAC periphery address space moved from
0xA00000 to 0xD00000.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 46 for 9000 and 22000 series

Start supporting API version 46 where applicable.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: introduce device family AX210

Add new device family AX210.
Make the needed changes for this family.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 45 for 9000 and 22000 series

Start supporting API version 45 where applicable.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: implement BISR HW workaround for 22260 devices

There's a small hardware bug in 22260 devices which thus require a
few more delays during initialization. Implement this workaround.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 44 for 9000 and 22000 series

Start supporting API version 44 where applicable.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: update product name for 9260 and 9560

update the product name for the some of the cards from
the series of 9260 and 9560

Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: add new cards for 22560, 9260 and killer series

add few PCI ID'S for 22560, 9260 and killer series.

Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: correct one of the PCI struct names

One of the cfg struct names is mistakenly "iwl22000", when it should
be "iwl22560".

Chage-Id: If9fbfa4bceef81d028c90c98d47115fbe39da547
Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Fixes: 2f7a3863191a ("iwlwifi: rename the temporary name of A000 to the official 22000")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: add PCI IDs for the 22260 device series

Add new structs and PCI IDs for 22260 devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump the API version to 43 for 9000 and 22000

Bump the API version to 43 for 9000 and 22000 devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

iwlwifi: remove all unnecessary occurrences of nvm_calib_ver

Now that nvm_calib_ver is not checked in opmodes other than dvm, we
can remove it from all irrelevant configurations.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: remove useless NVM_HW_SECTION_NUM_FAMILY_* macros

These macros are useless because each one of them is used only once
and the element they are assigned to is already pretty clear about
what they mean, "nvm_hw_section_num".

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: don't define OTP_LOW_IMAGE_SIZE per family, but per size

Using OTP_LOW_IMAGE_SIZE_FAMILY_8000/9000/22000 only obfuscates the
actual values, since these 3 are the same. Redefine the values per
size so it's easier to understand and compare the different
configurations.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: fix cfg structs for 22000 with different RF modules

We have to choose different configuration and different firmwares
depending on the external RF module that is installed. Since the
external module is not represented in the PCI IDs, we need to change
the configuration at runtime, after checking the RF ID of the module
installed. We have a bit of a mess in the code that does this,
because it applies cfg's according to the RF ID only, ignoring the
integrated module that is in use.

Fix that for some devices by adding correct configurations for them
and not ignoring the integrated module's type when making the
decision.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump firmware API version for 9000 and 22000 series devices

Bump the firmware API version to 41.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: fix non_shared_ant for 22000 devices

The non-shared antenna was wrong for 22000 device series.
Fix it to ANT_B for correct antenna preference by coex in MVM driver.

Fixes: e34d975e40ff ("iwlwifi: Add a000 HW family support")
Signed-off-by: Erel Geron <erelx.geron@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: fix devices with PCI Device ID 0x34F0 and 11ac RF modules

The devices with PCI device ID 0x34F0 are part of the SoC and can be
combined with some different external RF modules. The configuration
for these devices should reflect that, but are currently mixed up. To
avoid confusion with discrete devices, add part of the firmware to be
used and the official name of the device to the cfg structs.

This is least reorganization possible (without messing things even
more) that could be done as a bugfix for this SoC. Further
reorganization of this code will be done separately.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: add d3 debug data support

During d3, the firmware records debug data into internal buffer
if debug data collection occurs, collect the data that was written to the
buffer

Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: configure multi RX queue

Currently multi-queue is disabled for 22000 devices.

This was since driver isn't supposed to write to prph
registers anymore, and FW needs to configure the RFH.

Now that FW added support for the API - use it and remove
the 22000 multi RX queue disablement.

Bump min API version to avoid compatibility issues.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: support multiple tfd queue max sizes for different devices

22560 devices tfd queue max size is 2^16. Allow a configurable
max size in the driver for supporting different devices.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: introduce device family 22560

Device 22560 have many different hw and sw features than 22000 family,
so introduce a new family of devices - 22560.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: allow different csr flags for different device families

Different device families may have different flag values
for passing a message to the fw (i.e. SW_RESET).
In order to keep the code readable, and avoid conditioning
upon the family, store a value for each flag, which indicates
the bit that needs to be enabled.

Additionally, support 22560 device csr flags and addresses.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: add support for 22560 devices

Add support for the new 22560 family of devices and, while at it,
reorganize the 22000 family so it fits better with the new one.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: 22000 devices: restrict to HT A-MPDU size

Our current HE devices don't support BlockAck with the large bitmap,
so can't do TX aggregation with 256 frames. Restrict to the lower HT
size.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: cfg: remove unnecessary cfg data in non-dvm devices

The max_data_size and max_inst_size values are only needed for DVM
devices. Remove the assignment to those fields in 7000 and newer
families so we can also remove the otherwise unnecessary inclusion of
iwl-agn.h headers.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: allow different csr flags for different device families

Different device families may have different flag values
for passing a message to the fw (i.e. SW_RESET).
In order to keep the code readable, and avoid conditioning
upon the family, store a value for each flag, which indicates
the bit that needs to be enabled.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: Revert "iwlwifi: pcie: dynamic Tx command queue size"

This reverts commit dd05f9aab4426ff178b12d601e50d19d336eba30.

Shorter TX queues support was added eventually without the
need for the parameters this patch added.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump the max API version for 9000 and 22000 devices

We are now ready to load 38.ucode

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 36 for 8000 and up

Load version 36 of the API for these devices, if available. We
skipped version 35.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: rename the temporary name of A000 to the official 22000

The family name A000 was just a place-holder when we didn't know what
the official name would be yet. Now we know that the family name is
22000, so rename all occurrences accordingly.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>