wifi: brcmfmac: pcie: Add IDs/properties for BCM4387

This chip is present on Apple M1 Pro/Max (t600x) platforms:

* maldives (apple,j314s): MacBook Pro (14-inch, M1 Pro, 2021)
* maldives (apple,j314c): MacBook Pro (14-inch, M1 Max, 2021)
* madagascar (apple,j316s): MacBook Pro (16-inch, M1 Pro, 2021)
* madagascar (apple,j316c): MacBook Pro (16-inch, M1 Max, 2021)

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230214092423.15175-7-marcan@marcan.st

wifi: brcmfmac: pcie: Add IDs/properties for BCM4377

This chip is present on at least these Apple T2 Macs:

* tahiti: MacBook Pro 13" (2020, 2 TB3)
* formosa: MacBook Pro 13" (Touch/2019)
* fiji: MacBook Air 13" (Scissor, 2020)

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230212063813.27622-4-marcan@marcan.st

wifi: brcmfmac: pcie: Add IDs/properties for BCM4355

This chip is present on at least these Apple T2 Macs:

* hawaii: MacBook Air 13" (Late 2018)
* hawaii: MacBook Air 13" (True Tone, 2019)

Users report seeing PCI revision ID 12 for this chip, which Arend
reports should be revision C2, but Apple has the firmware tagged as
revision C1. Assume the right cutoff point for firmware versions is
revision ID 11 then, and leave older revisions using the non-versioned
firmware filename (Apple only uses C1 firmware builds).

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230212063813.27622-3-marcan@marcan.st

wifi: brcmfmac: Rename Cypress 89459 to BCM4355

The commit that introduced support for this chip incorrectly claimed it
is a Cypress-specific part, while in actuality it is just a variant of
BCM4355 silicon (as evidenced by the chip ID).

The relationship between Cypress products and Broadcom products isn't
entirely clear but given what little information is available and prior
art in the driver, it seems the convention should be that originally
Broadcom parts should retain the Broadcom name.

Thus, rename the relevant constants and firmware file. Also rename the
specific 89459 PCIe ID to BCM43596, which seems to be the original
subvariant name for this PCI ID (as defined in the out-of-tree bcmdhd
driver).

Since Cypress added this part and will presumably be providing its
supported firmware, we keep the CYW designation for this device.

We also drop the RAW device ID in this commit. We don't do this for the
other chips since apparently some devices with them exist in the wild,
but there is already a 4355 entry with the Broadcom subvendor and WCC
firmware vendor, so adding a generic fallback to Cypress seems
redundant (no reason why a device would have the raw device ID *and* an
explicitly programmed subvendor).

Fixes: dce45ded7619 ("brcmfmac: Support 89459 pcie")
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230212063813.27622-2-marcan@marcan.st

brcmfmac: Support 89459 pcie

Adds support of 89459 chip pcie device and save restore support.

Signed-off-by: Alexander Prutskov <alep@cypress.com>
Signed-off-by: Joseph chuang <jiac@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ian Lin <ian.lin@infineon.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220922104140.11889-3-ian.lin@infineon.com

wifi: brcmfmac: pcie: Add IDs/properties for BCM4378

This chip is present on Apple M1 (t8103) platforms:

* atlantisb (apple,j274): Mac mini (M1, 2020)
* honshu (apple,j293): MacBook Pro (13-inch, M1, 2020)
* shikoku (apple,j313): MacBook Air (M1, 2020)
* capri (apple,j456): iMac (24-inch, 4x USB-C, M1, 2020)
* santorini (apple,j457): iMac (24-inch, 2x USB-C, M1, 2020)

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDoD-0077ax-AI@rmk-PC.armlinux.org.uk

wifi: brcmfmac: add 43439 SDIO ids and initialization

Add HW and SDIO ids for use with the muRata 1YN (Cypress CYW43439).
Add the firmware mapping structures for the CYW43439 chipset.
The 43439 needs some things setup similar to the 43430 chipset.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220827024903.617294-1-marex@denx.de

brcmfmac: Add BCM43454/6 support

BCM43454/6 is a variant of BCM4345 which is exactly identical to
BCM4345/6, except the chip id is 0xa9be. This patch adds support
for BCM43454/6 by handing it in the same way as BCM4345.

Note: when loading some specific version of BCM4345 firmware, the
chip id may become 0x4345. This is an expected behavior, and it will
restore to 0xa9be after power cycle.

Signed-off-by: Jiaqing Zhao <jiaqing.zhao@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/CO1PR11MB47859B51BCA88613D1582EB88E2E9@CO1PR11MB4785.namprd11.prod.outlook.com

brcmfmac: add CYW43570 PCIE device

CYW43570 is a 3-antenna, 2x2 MIMO,802.11a/b/g/n/ac, PCIe 3.0 for WLAN.
It is BT/WIFI combo.

Signed-off-by: Soontak Lee <soontak.lee@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@infineon.com>
Signed-off-by: Ian Lin <ian.lin-ee@infineon.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211229035144.9205-1-ian.lin-ee@infineon.com

brcmfmac: add 43752 SDIO ids and initialization

Add HW and SDIO ids for use with the SparkLan AP6275S
Add the firmware mapping structures for the BRCM43752 chipset.
The 43752 needs some things setup similar to the 43012 chipset.
The WATERMARK shows better performance when initialized to the 4373 value.

Signed-off-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210812165218.2508258-2-angus@akkea.ca

brcmfmac: support BCM4365E with 43666 ChipCommon chip ID

This adds support for the BCM43666/4 which seems to be using the same
firmware as BCM4366 (4366c0). I found it in the Netgear R8000P router.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201214101553.32097-1-zajec5@gmail.com

brcmfmac: add the BRCM 4364 found in MacBook Pro 15,2

The 2018 13" MacBook Pro (MacBookPro15,2) has a Broadcom chip, the 4364.
This chip appears to be specific to Apple and is not found in other
hardware.

Add this chip to the brcmfmac driver so that it can be recognized
automatically. Note that the PCI device id is 4464 even though the chip
is referred to as the 4364.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

brcm80211: switch common header files to using SPDX license identifier

With ISC license text in place under the LICENSES folder switch
to using the SPDX license identifier to refer to the ISC license.

Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

brcmfmac: add support for CYW43012 SDIO chipset

CYW43012 is a 1x1 802.11a/b/g/n Dual-Band HT20, 256-QAM/Turbo QAM. It
is an Ultra Low Power WLAN+BT combo chip.

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Praveen Babu C <praveen.chandran@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

brcmfmac: add 4354 raw pcie device id

Add the raw 4354 PCIe device ID for unprogrammed Cypress boards.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Winnie Chang <winnie.chang@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

brcmfmac: add support for BCM4366E chipset

BCM4366E is a wireless chipset with a BCM43664 ChipCommon. It's
supported by the same firmware as 4366c0.

Signed-off-by: Dan Haab <dan.haab@luxul.com>
[arend: rebase patch and remove unnecessary definition]
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

brcmfmac: Add support for CYW4373 SDIO/USB chipset

Add support for CYW4373 SDIO/USB chipset.
CYW4373 is a 1x1 dual-band 11ac chipset with 20/40/80Mhz channel support.
It's a WiFi/BT combo device.

Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

brcmfmac: add support for 43341 chip

This chip was already supported, but seems a device came up giving
a different chip identifier. So adding that effectively mapping to
the same firmware file as for 43340 chip.

Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

brcmfmac: Add USB ID for Cisco Linksys AE1200

The AE1200 comes with different revisions of the BCM43235 chipset,
but all have the same USB ID. Only revision 3 can be supported.

Signed-off-by: Ismael Luceno <ismael@iodev.co.uk>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

brcmfmac: add support for the PCIE devices 43525 and 43465

This patch adds support for the new PCIE devices 43525 and 43465.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <franky.lin@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

brcmfmac: add 43242 device id for LG dongle

Got a hint on IRC that a 43242 dongle for LG smart TV's works with
brcmfmac:

> Hello - I recently got a LG AN-WF500 wireless dongle for LG's SmartTVs.
> From the information I gathered it uses a Broadcom chipset BCM43242.
> The device should have been supported by brcmfmac kernel driver if it used
> USB IDs 0a5c:bd1f.
> My device however identifies itself as "ID 043e:3101 LG Electronics USA, Inc.".
> I then tried adding the USB ID to the driver with
> "echo "043e 3101" > /sys/bus/usb/drivers/brcmfmac/new_id" and it just works.
> The kernel provides the following information.
> [15958.851291] usb 3-1.1.3: new high-speed USB device number 53 using ehci-pci
> [15958.946723] usb 3-1.1.3: New USB device found, idVendor=043e, idProduct=3101
> [15958.946728] usb 3-1.1.3: New USB device strings: Mfr=1, Product=4, SerialNumber=3
> [15958.946731] usb 3-1.1.3: Product: Composite Wireless Adapter
> [15958.946733] usb 3-1.1.3: Manufacturer: Broadcom
> [15958.946735] usb 3-1.1.3: SerialNumber: 28458

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

brcmfmac: Add support for the BCM4359 11ac RSDB PCIE device.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

brcm80211: move under broadcom vendor directory

Part of reorganising wireless drivers directory and Kconfig. Note that I had to
edit Makefiles from subdirectories to use the new location.

Signed-off-by: Kalle Valo <kvalo@codeaurora.org>