#
bec95598 |
|
23-Oct-2023 |
Arnd Bergmann <arnd@arndb.de> |
wifi: remove orphaned rndis_wlan driver Wireless RNDIS USB is a new-style CFG80211 driver for 802.11b and 802.11g USB hardware from around 2004 to 2006. This makes it more modern than any of the others, but Kalle already classified it as "legacy" in commit 298e50ad8eb8f ("wifi: move raycs, wl3501 and rndis_wlan to legacy directory"). Jussi Kivilinna worked on this driver between 2008 and 2012, and it has only seen cosmetic updates after that. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@kernel.org>
|
#
6853c70b |
|
23-Oct-2023 |
Arnd Bergmann <arnd@arndb.de> |
wifi: remove orphaned cisco/aironet driver Cisco Aironet is an 802.11b PCMCIA and mini-PCI with limited support for Cardbus DMA and for CFG80211. Both PCMCIA and WEXT are deprecated, and there is little chance that anyone is still using this driver, so remove it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@kernel.org>
|
#
298e50ad |
|
27-Feb-2023 |
Kalle Valo <kvalo@kernel.org> |
wifi: move raycs, wl3501 and rndis_wlan to legacy directory To clean up drivers/net/wireless move the old drivers drivers left in the directory to a new "legacy" directory. I did consider adding CONFIG_WLAN_VENDOR_LEGACY like other vendors have but then dropped the idea as these are really old drivers and hopefully we get to remove them soon. There should be no changes in compilation or in Kconfig options, merely moving files. Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230227121732.8967-3-kvalo@kernel.org
|
#
f79cbc77 |
|
27-Feb-2023 |
Kalle Valo <kvalo@kernel.org> |
wifi: move mac80211_hwsim and virt_wifi to virtual directory To clean up drivers/net/wireless move the virtual drivers to a new virtual directory. I did consider adding CONFIG_WLAN_VENDOR_VIRTUAL like other vendors have but then dropped the idea as we are not real drivers. There should be no changes in compilation or in Kconfig options, merely moving files. The order in menuconfig is slightly changed, the virtual drivers are now last in the list. Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230227121732.8967-2-kvalo@kernel.org
|
#
68d57a07 |
|
24-Feb-2022 |
Srinivasan Raju <srini.raju@purelifi.com> |
wireless: add plfxlc driver for pureLiFi X, XL, XC devices This is a driver for pureLiFi X, XL, XC devices which use light to transmit data, so they are not compatible with normal Wi-Fi devices. The driver uses separate NL80211_BAND_LC band to distinguish from Wi-Fi. The driver is based on 802.11 softMAC Architecture and uses native 802.11 for configuration and management. Station and Ad-Hoc modes are supported. The driver is compiled and tested in ARM, x86 architectures and compiled in powerpc architecture. This driver implementation has been based on the zd1211rw driver. Signed-off-by: Srinivasan Raju <srini.raju@purelifi.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220224182042.132466-3-srini.raju@purelifi.com
|
#
4a5fb1bb |
|
26-Feb-2022 |
Jérôme Pouiller <jerome.pouiller@silabs.com> |
wfx: get out from the staging area The wfx driver is now mature enough to leave the staging area. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Signed-off-by: Kalle Valo <kvalo@kernel.org>
|
#
326a10b9 |
|
09-Nov-2020 |
Johannes Berg <johannes.berg@intel.com> |
wireless: remove CONFIG_WIRELESS_WDS WDS has long been superseded by 4-addr AP/client and lacks such fundamental features like encryption, capability negotiation, and similar. As such, it was basically always unusable as is. Back in 2016, in commit 8f20542386c5 ("wireless: deprecate WDS and disable by default") I disabled it and made the Kconfig option only available under CONFIG_EXPERT to turn it back on. Since then, nobody has complained about that, and given the severe limitations with the code, it's unlikely anyone would have a reason to. Remove the Kconfig option now, so we can clean up the associated code in follow-up patches. Link: https://lore.kernel.org/r/20201109105103.7d1e44c50e21.I2c0a1705fd6491d9ba3400c88415ee2c4832ae98@changeid Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
0ef2c2d1 |
|
05-Jun-2020 |
Flavio Suligoi <f.suligoi@asem.it> |
wireless: fix wiki website url in main Kconfig The wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200605154112.16277-3-f.suligoi@asem.it
|
#
5c3b5da4 |
|
26-Jun-2020 |
Jakub Kicinski <kuba@kernel.org> |
docs: networking: move ray_cs to the hw driver section Move ray_cs into Wi-Fi driver docs subdirectory. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5625f965 |
|
24-Jun-2020 |
Ajay Singh <ajay.kathat@microchip.com> |
wilc1000: move wilc driver out of staging WILC1000 is an IEEE 802.11 b/g/n IoT link controller module. The WILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with a simple SPI/SDIO-to-Wi-Fi interface. WILC1000 driver has been part of staging for few years. With contributions from the community, it has improved significantly. Full driver review has helped in achieving the current state. The details for those reviews are captured in 1 & 2. [1]. https://lore.kernel.org/linux-wireless/1537957525-11467-1-git-send-email-ajay.kathat@microchip.com/ [2]. https://lore.kernel.org/linux-wireless/1562896697-8002-1-git-send-email-ajay.kathat@microchip.com/ Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
a7f7f624 |
|
13-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: replace '---help---' in Kconfig files with 'help' Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
8c6e1720 |
|
30-Apr-2020 |
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
docs: networking: convert ray_cs.txt to ReST - add SPDX header; - use copyright symbol; - add a document title; - mark code blocks and literals as such; - mark tables as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ec8f24b7 |
|
19-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
c7cdba31 |
|
20-Nov-2018 |
Cody Schuffelen <schuffelen@google.com> |
mac80211-next: rtnetlink wifi simulation device This device takes over an existing network device and produces a new one that appears like a wireless connection, returning enough canned responses to nl80211 to satisfy a standard connection manager. If necessary, it can also be set up one step removed from an existing network device, such as through a vlan/80211Q or macvlan connection to not disrupt the existing network interface. To use it to wrap a bare ethernet connection: ip link add link eth0 name wlan0 type virt_wifi You may have to rename or otherwise hide the eth0 from your connection manager, as the original network link will become unusuable and only the wireless wrapper will be functional. This can also be combined with vlan or macvlan links on top of eth0 to share the network between distinct links, but that requires support outside the machine for accepting vlan-tagged packets or packets from multiple MAC addresses. This is being used for Google's Remote Android Virtual Device project, which runs Android devices in virtual machines. The standard network interfaces provided inside the virtual machines are all ethernet. However, Android is not interested in ethernet devices and would rather connect to a wireless interface. This patch allows the virtual machine guest to treat one of its network connections as wireless rather than ethernet, satisfying Android's network connection requirements. We believe this is a generally useful driver for simulating wireless network connections in other environments where a wireless connection is desired by some userspace process but is not available. This is distinct from other testing efforts such as mac80211_hwsim by being a cfg80211 device instead of mac80211 device, allowing straight pass-through on the data plane instead of forcing packaging of ethernet data into mac80211 frames. Signed-off-by: A. Cody Schuffelen <schuffelen@google.com> Acked-by: Alistair Strachan <astrachan@google.com> Acked-by: Greg Hartman <ghartman@google.com> Acked-by: Tristan Muntsinger <muntsinger@google.com> [make it a tristate] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
98f44cb0 |
|
11-May-2017 |
Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> |
qtnfmac: introduce new FullMAC driver for Quantenna chipsets This patch adds support for new FullMAC WiFi driver for Quantenna QSR10G chipsets. QSR10G (aka Pearl) is Quantenna's 8x8, 160M, 11ac offering. QSR10G supports 2 simultaneous WMACs - one 5G and one 2G. 5G WMAC supports 160M, 8x8 configuration. FW supports up to 8 concurrent virtual interfaces on each WMAC. Patch introduces 2 new drivers: - qtnfmac.ko for interfacing with kernel wireless core - qtnfmac_pearl_pcie.ko for interfacing with hardware over PCIe interface Signed-off-by: Dmitrii Lebed <dlebed@quantenna.com> Signed-off-by: Sergei Maksimenko <smaksimenko@quantenna.com> Signed-off-by: Sergey Matyukevich <smatyukevich@quantenna.com> Signed-off-by: Bindu Therthala <btherthala@quantenna.com> Signed-off-by: Huizhao Wang <hwang@quantenna.com> Signed-off-by: Kamlesh Rath <krath@quantenna.com> Signed-off-by: Avinash Patil <avinashp@quantenna.com> Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
8f205423 |
|
18-Oct-2016 |
Johannes Berg <johannes.berg@intel.com> |
wireless: deprecate WDS and disable by default The old WDS 4-addr frame support is very limited, e.g. * no encryption is possible on such links * it cannot support rate/HT/VHT negotiation * management APIs are very restricted These make the WDS legacy mode useless in practice. All of these are resolved by the 4-addr AP/client support, so there's also no reason to improve WDS in the future. Therefore, add a Kconfig option to disable legacy WDS. This gives people an "emergency valve" while they migrate to the better-supported 4-addr AP/client option; we plan to remove it (and the associated cfg80211/mac80211 code, which is the ultimate goal) in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
6d808eba |
|
18-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
mac80211_hwsim: move Kconfig entry for sorting alphabetically mac80211_hwsim was not placed alphabetically correctly in menuconfig, fix that. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
b5c9b4f9 |
|
18-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
ath: unify Kconfig with other vendors Change menuconfig to config to keep the Kconfig entries unified. Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
bd842171 |
|
18-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
ti: unify Kconfig with other vendors Rename WL_TI to WLAN_VENDOR_TI to match with other vendor configs and make sure that it's enabled by default in new configs. Convert menuconfigs to regular configs to unify the wireless drivers menuconfig. Part of reorganising wireless drivers directory and Kconfig. Also remove WLCORE dependency to WL_TI. It should not be needed as WLCORE is already under if WLAN_VENDOR_TI. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
7b09ed5a |
|
18-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
mediatek: unify Kconfig with other vendors Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
33aca94d |
|
18-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
rt2x00: move under ralink vendor directory Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
941a967c |
|
18-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
rsi: add vendor Kconfig entry Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
62141726 |
|
18-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
realtek: create separate Kconfig file Add new a Kconfig file and a vendor config for realtek. Also update MAINTAINERS which we missed to do when earlier moving rtlwifi. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
c12edfe2 |
|
18-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
prism54: move under intersil vendor directory Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
2be45b66 |
|
18-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
orinoco: move under intersil vendor directory Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
d3466830 |
|
18-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
p54: move under intersil vendor directory Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
eb4f98d5 |
|
18-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
hostap: move under intersil vendor directory Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
6948300c |
|
18-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
zd1211rw: move under zydas vendor directory Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
ed0ad06f |
|
17-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
zd1201: move under zydas vendor directory Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
de60f1dc |
|
17-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
mwl8k: move under marvell vendor directory Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
277b024e |
|
17-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
mwifiex: move under marvell vendor directory Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
dd3f92de |
|
17-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
libertas_tf: move under marvell vendor directory Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
f988d640 |
|
17-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
libertas: move under marvell vendor directory Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
e705c121 |
|
17-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
iwlwifi: move under intel vendor directory Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
7ac9a364 |
|
17-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
iwlegacy: move under intel directory Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
367a1092 |
|
17-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
ipw2x00: move under intel vendor directory Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
560424e9 |
|
17-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
cw1200: move under st vendor directory Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
05491d2c |
|
17-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
brcm80211: move under broadcom vendor directory Part of reorganising wireless drivers directory and Kconfig. Note that I had to edit Makefiles from subdirectories to use the new location. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
423e3ce3 |
|
17-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
b43legacy: move under broadcom vendor directory Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
58619b14 |
|
17-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
b43: move under broadcom vendor directory Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
30fe0f9b |
|
17-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
atmel: move under atmel vendor directory Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
30db0ca8 |
|
17-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
airo: move under cisco vendor directory Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
d4a17304 |
|
17-Nov-2015 |
Kalle Valo <kvalo@codeaurora.org> |
adm80211: move under admtek vendor directory Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
26f1fad2 |
|
14-Oct-2015 |
Jes Sorensen <Jes.Sorensen@redhat.com> |
New driver: rtl8xxxu (mac80211) This is an alternate driver for a number of Realtek WiFi USB devices, including RTL8723AU, RTL8188CU, RTL8188RU, RTL8191CU, and RTL8192CU. It was written from scratch utilizing the Linux mac80211 stack. After spending months cleaning up the vendor provided rtl8723au driver, which comes with it's own 802.11 stack included, I decided to rewrite this driver from the bottom up. Many thanks to Johannes Berg for 802.11 insights and help and Larry Finger for help with the vendor driver. The full git log for the development of this driver can be found here: git git://git.kernel.org/pub/scm/linux/kernel/git/jes/linux.git branch rtl8723au-mac80211 This driver is still under development, but has proven to be very stable for me. It currently supports station mode only. It has support for OFDM and CCK rates. It does lack certain features found in the staging driver, such as power management, AMPDU, and 40MHz channel support. In addition it does not support AD-HOC, AP, and monitor mode support at this point. The driver is known to work with the following devices: Lenovo Yoga (rtl8723au) TP-Link TL-WN823N (rtl8192cu) Etekcity 6R (rtl8188cu) Daffodil LAN03 (rtl8188cu) Alfa AWUS036NHR (rtl8188ru) Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
f1d2b4d3 |
|
07-Sep-2015 |
Larry Finger <Larry.Finger@lwfinger.net> |
rtlwifi: rtl818x: Move drivers into new realtek directory Now that a new mac80211-based driver for Realtek devices has been submitted, it is time to reorganize the directories. Rather than having directories rtlwifi and rtl818x be in drivers/net/wireless/, they will now be in drivers/net/wireless/realtek/. This change simplifies the directory structure, but does not result in any configuration changes that are visable to the user. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
c869f77d |
|
26-May-2015 |
Jakub Kicinski <kubakici@wp.pl> |
add mt7601u driver Add support for the simplest of MediaTek Wi-Fi devices - MT7601U. It is a single stream bgn chip with no bells or whistles. This driver is partially based on Felix's mt76 but IMHO it doesn't make sense to merge the two right now because MT7601U is a design somewhere between old Ralink devices and new Mediatek chips. There wouldn't be all that much code sharing with the devices mt76 supports. Situation may obviously change when someone decides to extend m76 with support for the more recent USB dongles. The driver supports only station mode. I'm hoping to add AP support when time allows. This driver sat on GitHub for quite a while and got some testing there: http://github.com/kuba-moo/mt7601u Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
269f8cb2 |
|
06-Aug-2014 |
Francois Romieu <romieu@fr.zoreil.com> |
net: fix USB network driver config option. It must be tristate to avoid broken dependencies with kernel built-in usb network drivers when usb support is module only. When net config option is set, least surprize default should match usb. Wireless RNDIS USB driver used to select USB_USBNET. USB_USBNET now depends on USB_NET_DRIVERS so the latter should be selected as well. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
dad0d04f |
|
15-Mar-2014 |
Fariya Fatima <fariyaf@gmail.com> |
rsi: Add RS9113 wireless driver This patch adds the Redpine Signals' 91x wireless driver. Signed-off-by: Fariya Fatima <fariyaf@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
a0b2a8f4 |
|
10-Mar-2014 |
Arnd Bergmann <arnd@arndb.de> |
wireless: Kconfig: add missing dependency for airo_cs commit 4c59ff221e070 "wireless: Kconfig: add missing dependency" added a number of 'depends on CFG80211' statements, but missed the AIRO_CS driver that also causes the airo.c file to be built. This adds the (hopefully) last such missing statement Cc: "Zhao, Gang" <gamerh2o@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
4c59ff22 |
|
28-Feb-2014 |
Zhao, Gang <gamerh2o@gmail.com> |
wireless: Kconfig: add missing dependency Previous driver changes to airo, atmel, wl3501_cs, and usb_zd1201 need to include <net/cfg80211.h>, which depends on CFG80211, so add the missing dependency. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
a910e4a9 |
|
24-May-2013 |
Solomon Peachy <pizza@shaftnet.org> |
cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets Signed-off-by: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
798f4e5e |
|
22-Jan-2013 |
Kees Cook <keescook@chromium.org> |
drivers/net/wireless: remove depends on CONFIG_EXPERIMENTAL The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. Acked-by: John W. Linville <linville@tuxdriver.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
c0f04160 |
|
17-Dec-2012 |
Tao Ma <boyu.mt@taobao.com> |
drivers: remove reference to feature-removal-schedule.txt In commit 9c0ece069b32 ("Get rid of Documentation/feature-removal.txt"), Linus removed feature-removal-schedule.txt from Documentation, but there is still some reference to this file. So remove them. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
bdb903e4 |
|
26-Jun-2012 |
John W. Linville <linville@tuxdriver.com> |
iwmc3200wifi: remove driver for unavailable hardware This hardware never became available to normal humans. Leaving this driver imposes unwelcome maintenance costs for no clear benefit. Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
90921014 |
|
20-Nov-2011 |
Luciano Coelho <coelho@ti.com> |
wireless/wl12xx/wl1251: move TI WLAN modules to a common ti subdirectory Move wl12xx and wl1251 modules into a new drivers/net/wireless/ti directory. Add a TI WLAN Kconfig option and Makefile to support this change. Signed-off-by: Luciano Coelho <coelho@ti.com> Cc: John W. Linville <linville@tuxdriver.com>
|
#
5b435de0 |
|
05-Oct-2011 |
Arend van Spriel <arend@broadcom.com> |
net: wireless: add brcm80211 drivers Add the brcm80211 tree to drivers/net/wireless, and disable the version that's in drivers/staging. This version includes the sources currently in staging, plus any changes that have been sent out for review. Sources in staging will be deleted in a followup patch. Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
5e6e3a92 |
|
21-Mar-2011 |
Bing Zhao <bzhao@marvell.com> |
wireless: mwifiex: initial commit for Marvell mwifiex driver This driver adds WiFi support for Marvell 802.11n based chipsets with SDIO interface. Currently only SD8787 is supported. More chipsets will be supported later. drivers/net/wireless/mwifiex/ Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Ramesh Radhakrishnan <rramesh@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
be663ab6 |
|
21-Feb-2011 |
Wey-Yi Guy <wey-yi.w.guy@intel.com> |
iwlwifi: split the drivers for agn and legacy devices 3945/4965 Intel WiFi devices 3945 and 4965 now have their own driver in the folder drivers/net/wireless/iwlegacy Add support to build these drivers independently of the driver for AGN devices. Selecting the 3945 builds iwl3945.ko and iwl_legacy.ko, and selecting the 4965 builds iwl4965.ko and iwl_legacy.ko. iwl-legacy.ko contains code shared between both devices. The 3945 is an ABG/BG device, with no support for 802.11n. The 4965 is a 2x3 ABGN device. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Acked-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
|
#
4bc85c13 |
|
21-Feb-2011 |
Wey-Yi Guy <wey-yi.w.guy@intel.com> |
Revert "iwlwifi: split the drivers for agn and legacy devices 3945/4965" This reverts commit aa833c4b1a928b8d3c4fcc2faaa0d6b81ea02b56.
|
#
aa833c4b |
|
21-Feb-2011 |
Wey-Yi Guy <wey-yi.w.guy@intel.com> |
iwlwifi: split the drivers for agn and legacy devices 3945/4965 Intel WiFi devices 3945 and 4965 now have their own driver in the folder drivers/net/wireless/iwlegacy Add support to build these drivers independently of the driver for AGN devices. Selecting the 3945 builds iwl3945.ko and iwl_legacy.ko, and selecting the 4965 builds iwl4965.ko and iwl_legacy.ko. iwl-legacy.ko contains code shared between both devices. The 3945 is an ABG/BG device, with no support for 802.11n. The 4965 is a 2x3 ABGN device. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Acked-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
|
#
0c817338 |
|
08-Dec-2010 |
Larry Finger <Larry.Finger@lwfinger.net> |
rtl8192ce: Add new driver Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
9bc6772e |
|
10-Oct-2010 |
Kalle Valo <kvalo@adurom.com> |
wl1251: move to it's own directory wl1271 driver is under heavy development but on the other hand the older wl1251 driver is currently considered more as a legacy driver. To make it easier to develop wl1271 features move wl1251 to it's own directory, drivers/net/wireless/wl1251. There are no functional changes, only moving of files. One regression is that Kconfig won't be updated automatically and user needs to enable wl1251 manually with an older config file. Signed-off-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
9459d59f |
|
10-May-2010 |
Randy Dunlap <randy.dunlap@oracle.com> |
wireless: depends on NET When CONFIG_NET is disabled, the attempt to build wext-priv.c fails with: net/wireless/wext-priv.c: In function 'ioctl_private_call': net/wireless/wext-priv.c:207: error: implicit declaration of function 'call_commit_handler' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
e9bd5bcd |
|
25-Apr-2010 |
Steve deRosier <steve@cozybit.com> |
libertastf: add configurable debug messages Add the same type of configurable debug messages to libertas_tf as already exist in the libertas driver. This has facilitated creation of a interface specification and will facilitate future development of this driver. Signed-off-by: Steve deRosier <steve@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
edbe056a |
|
15-Apr-2010 |
Larry Finger <Larry.Finger@lwfinger.net> |
rtl818x: Move configuration details to the rtl818x directory In preparation for new rtl818x devices, move the existing rtl818x configuration into the rtl818x directory. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
2bf9fa69 |
|
12-Feb-2010 |
Randy Dunlap <randy.dunlap@oracle.com> |
wireless: airo_cs build fixes When WEXT_PRIV is not enabled, airo_cs has build errors. It needs to include net/iw_handler.h and it should select WEXT_PRIV, like the airo driver does. drivers/net/wireless/airo.c:7655: error: unknown field 'num_private' specified in initializer drivers/net/wireless/airo.c:7655: warning: initialization makes pointer from integer without a cast drivers/net/wireless/airo.c:7656: error: unknown field 'num_private_args' specified in initializer drivers/net/wireless/airo.c:7656: warning: excess elements in struct initializer drivers/net/wireless/airo.c:7656: warning: (near initialization for 'airo_handler_def') drivers/net/wireless/airo.c:7658: error: unknown field 'private' specified in initializer drivers/net/wireless/airo.c:7658: warning: initialization makes integer from pointer without a cast drivers/net/wireless/airo.c:7658: error: initializer element is not computable at load time drivers/net/wireless/airo.c:7658: error: (near initialization for 'airo_handler_def.num_standard') drivers/net/wireless/airo.c:7659: error: unknown field 'private_args' specified in initializer drivers/net/wireless/airo.c:7659: warning: initialization from incompatible pointer type Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
75026664 |
|
28-Oct-2009 |
Randy Dunlap <randy.dunlap@oracle.com> |
wireless: airo_cs needs WEXT_SPY airo_cs uses spy interfaces so it needs to select WEXT_SPY. ERROR: "iw_handler_set_thrspy" [drivers/net/wireless/airo.ko] undefined! ERROR: "wireless_spy_update" [drivers/net/wireless/airo.ko] undefined! ERROR: "iw_handler_get_spy" [drivers/net/wireless/airo.ko] undefined! ERROR: "iw_handler_get_thrspy" [drivers/net/wireless/airo.ko] undefined! ERROR: "iw_handler_set_spy" [drivers/net/wireless/airo.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
133d7c6a |
|
28-Oct-2009 |
John W. Linville <linville@tuxdriver.com> |
wireless: remove WLAN_80211 and WLAN_PRE80211 from Kconfig With the WLAN_PRE80211 drivers moved to drivers/staging, this distinction becomes unnecessary. Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
4b578354 |
|
28-Oct-2009 |
John W. Linville <linville@tuxdriver.com> |
netwave: move driver to staging Move the netwave driver to drivers/staging. This is another pre-802.11 driver that has seen virtually no non-API-fixup activity in years, and for which no active hardware is likely to still exist. This driver represents unnecessary ongoing maintenance for no clear benefit. This patch brought to you by the "hacking" session at the 2009 Kernel Summit in Tokyo, Japan... Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
0234f84e |
|
28-Oct-2009 |
John W. Linville <linville@tuxdriver.com> |
wavelan: move driver to staging Move the wavelan driver to drivers/staging. This is another pre-802.11 driver that has seen virtually no non-API-fixup activity in years, and for which no active hardware is likely to still exist. This driver represents unnecessary ongoing maintenance for no clear benefit. This patch brought to you by the "hacking" session at the 2009 Kernel Summit in Tokyo, Japan... Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
e38879ef |
|
19-Oct-2009 |
John W. Linville <linville@tuxdriver.com> |
arlan: move driver to staging Move the arlan driver to drivers/staging. This is another pre-802.11 driver that has seen virtually no non-API-fixup activity in years, and for which no active hardware is likely to still exist. This driver represents unnecessary ongoing maintenance for no clear benefit. This patch brought to you by the "hacking" session at the 2009 Kernel Summit in Tokyo, Japan... Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
955015bb |
|
19-Oct-2009 |
John W. Linville <linville@tuxdriver.com> |
strip: move driver to staging Move the strip ("Starmode Radio IP") driver to drivers/staging. For several years this driver has only seen API "bombing-run" changes, and few people ever had the hardware. This driver represents unnecessary ongoing maintenance for no clear benefit. This patch brought to you by the "hacking" session at the 2009 Kernel Summit in Tokyo, Japan... Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
eab2ec83 |
|
09-Oct-2009 |
Johannes Berg <johannes@sipsolutions.net> |
wireless: make wireless drivers select core It is somewhat non-sensical to allow selecting wireless drivers without showing wireless core code options, and since the wext refactoring this has made it possible to generate configurations that will not build. Avoid this and make wireless drivers select the wireless options. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
0465af8e |
|
06-Oct-2009 |
Holger Schurig <hs4233@mail.mn-solutions.de> |
libertas: separate libertas' Kconfig in it's own file Also sorts all "source" lines in the wireless/Kconfig. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
3d23e349 |
|
29-Sep-2009 |
Johannes Berg <johannes@sipsolutions.net> |
wext: refactor Refactor wext to * split out iwpriv handling * split out iwspy handling * split out procfs support * allow cfg80211 to have wireless extensions compat code w/o CONFIG_WIRELESS_EXT After this, drivers need to - select WIRELESS_EXT - for wext support - select WEXT_PRIV - for iwpriv support - select WEXT_SPY - for iwspy support except cfg80211 -- which gets new hooks in wext-core.c and can then get wext handlers without CONFIG_WIRELESS_EXT. Wireless extensions procfs support is auto-selected based on PROC_FS and anything that requires the wext core (i.e. WIRELESS_EXT or CFG80211_WEXT). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
28ad3957 |
|
01-Oct-2009 |
Ralf Baechle <ralf@linux-mips.org> |
Kconfig: STRIP: Remove stale bits of STRIP help text Remove references to dead web site mosquitonet.Stanford.EDU. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7ab44f17 |
|
11-Sep-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
wireless: default CONFIG_WLAN to y When this was added no defaults were set and it seems this implies n. Default this to y. Reported-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
ff4d572a |
|
11-Sep-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
wireless: default CONFIG_WLAN to y When this was added no defaults were set and it seems this implies n. Default this to y. Reported-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
4d8cd268 |
|
08-Sep-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
wireless: mark prism54 as deprecated and mark for removal The preferred module is p54pci which also supports FullMAC PCI / Cardbus devices. We schedule removal for 2.6.34. Reason to remove this is no one really is testing prism54 anymore, and while it works p54pci provides support for the same hardware. It should be noted I have been told some FullMAC devices may not have worked with the SoftMAC driver but to date we have yet to recieve a single bug report regarding this. If there are users out there please let us know! Cc: aquilaver@yahoo.com Cc: linux-kernel@vger.kernel.org Cc: Dan Williams <dcbw@redhat.com> Cc: Kai Engert <kengert@redhat.com> Cc: Jean Tourrilhes <jt@hpl.hp.com> Cc: Tim de Waal<tim.dewaal@yahoo.com> Cc: Roy Marples <uberlord@gentoo.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Christian Lamparter <chunkeey@web.de> Cc: Björn Steinbrink <B.Steinbrink@gmx.de> Cc: Tim Gardner <tim.gardner@canonical.com> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
44175272 |
|
01-Sep-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
wireless: update top level wireless driver entry Change it to a menuconfig to give it some documentation, to refer users to our wireless wiki for extra resources and documentation. It seems our wiki is still obscure to some. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
2b7dcfb7 |
|
01-Sep-2009 |
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> |
rndis_wlan: remove 'select WIRELESS_EXT' in Kconfig Since rndis_wlan is now converted to cfg80211, WIRELESS_EXT isn't required anymore. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
3e640452 |
|
27-Jul-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
wireless: use menuconfig for WLAN_PRE80211 and WLAN_80211 This should make it very clear which are pre-802.11 or not Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
256fc960 |
|
13-Jul-2009 |
Hin-Tak Leung <hintak.leung@gmail.com> |
rtl8187: updating Kconfig with info of branded devices Adding more detailed info about Asus motherboards and Ralink devices. Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
f874011b |
|
08-Jul-2009 |
Marcin Slusarz <marcin.slusarz@gmail.com> |
wireless: fix supported cards for rtl8187 Different revisions of WUSB54GC-EU use different chipsets - v2 uses rtl8187, but v3 uses Ralink RT3070. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Przemyslaw Kulczycki <azrael@autocom.pl> Cc: John W. Linville <linville@tuxdriver.com> Cc: Linux wireless <linux-wireless@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
4737f097 |
|
04-Jun-2009 |
Pavel Machek <pavel@ucw.cz> |
trivial: Kconfig: .ko is normally not included in module names .ko is normally not included in Kconfig help, make it consistent. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
#
4d1d4985 |
|
04-Jun-2009 |
Sebastian Andrzej Siewior <bigeasy@linutronix.de> |
net/libertas: remove GPIO-CS handling in SPI interface code This removes the dependency on GPIO framework and lets the SPI host driver handle the chip select. The SPI host driver is required to keep the CS active for the entire message unless cs_change says otherwise. This patch collects the two/three single SPI transfers into a message. Also the delay in read path in case use_dummy_writes are not used is moved into the SPI host driver. Tested-by: Mike Rapoport <mike@compulab.co.il> Tested-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
0aa8204b |
|
03-Jun-2009 |
Johannes Berg <johannes@sipsolutions.net> |
cfg80211: fix Kconfig for users of cfg80211 * iwm doesn't depend on cfg80211 or wireless extensions * rndis wlan selects cfg80211 - needs to depend * mac80211 selects cfg80211 - needs to depend Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
aeeab4ff |
|
27-May-2009 |
John W. Linville <linville@tuxdriver.com> |
rtl8187: add USB ID for Linksys WUSB54GC-EU v2 USB wifi dongle http://bugzilla.kernel.org/show_bug.cgi?id=13383 Reported-by: Przemyslaw Kulczycki <azrael@autocom.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
bb9f8692 |
|
21-May-2009 |
Zhu Yi <yi.zhu@intel.com> |
iwmc3200wifi: Add new Intel Wireless Multicomm 802.11 driver This driver supports Intel's full MAC wireless multicomm 802.11 hardware. Although the hardware is a 802.11agn device, we currently only support 802.11ag, in managed and ad-hoc mode (no AP mode for now). Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
2f01a1f5 |
|
29-Apr-2009 |
Kalle Valo <kalle.valo@nokia.com> |
wl12xx: add driver wl12xx is a driver for TI wl1251 802.11 chipset designed for embedded devices, supporting both SDIO and SPI busses. Currently the driver supports only SPI. Adding support 1253 (the 5 GHz version) should be relatively easy. More information here: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?contentId=4711&navigationId=12494&templateId=6123 (Collapsed original sequence of pre-merge patches into single commit for initial merge. -- JWL) Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
ff2ba188 |
|
22-Apr-2009 |
John W. Linville <linville@tuxdriver.com> |
rndis_wlan: select CFG80211 in Kconfig Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
a027087a |
|
16-Apr-2009 |
Larry Finger <Larry.Finger@lwfinger.net> |
rtl8187: Implement TX/RX blink for LED The following patch implements some control over the LED on RTL8187B and RTL8187L devices. Triggers are registered for TX and RX. Whenever the trigger event occurs, the LED is turned off for 1/20 second, then turned back on. Note: For those RTL8187X devices that are built into the computer and have a LED that is expected to be controlled with a radio switch, this patch will not operate that LED. That will take a separate patch to be prepared later. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
e45d8e53 |
|
06-Apr-2009 |
Bing Zhao <bzhao@marvell.com> |
libertas: add support for Marvell SD8688 chip libertas: add support for Marvell SD8688 chip Use RxPD->pkt_ptr to locate eth803 header in the packet received since SD8688/v10 firmware allows a gap between RxPD and eth803 header. Set SDIO block size to 256 for CMD53. The maximum block size for SD8688 WLAN function is set to 512 in TPLFE_MAX_BLK_SIZE. But using 512 as block size results upto 2K bytes data (4 blocks) being transferred and causes buffer overflow in firmware. Both changes above are backward compatible with earlier firmware versions for SD8385/SD8686. The SDIO_DEVICE_IDs for SD8688 chip are added in include/linux/mmc/sdio_ids.h Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
203c4805 |
|
30-Mar-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
atheros: put atheros wireless drivers into ath/ Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
3a702e49 |
|
30-Mar-2009 |
Bob Copeland <me@bobcopeland.com> |
atheros: introduce ath module containing common ath5k/ath9k/ar9170 code This change creates a new module, ath.ko, which includes code that can be shared between ath5k, ath9k and ar9170. For now, extract most of the ath9k regulatory code so it can also be used in ath5k. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
75ca88c9 |
|
21-Mar-2009 |
Christian Lamparter <chunkeey@web.de> |
ar9170: update Makefile, Kconfig and MAINTAINERS This patch update all necessary Makefile and Kconfig files. Now you can then enable ar9170 in the kernel configuration under: Device Drivers ---> [*] Network device support ---> Wireless LAN ---> [*] Wireless LAN (IEEE 802.11) <M> Atheros AR9170 support <M> Atheros AR9170 USB support Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
a66098da |
|
10-Mar-2009 |
Lennert Buytenhek <buytenh@wantstofly.org> |
mwl8k: Marvell TOPDOG wireless driver Add a driver for Marvell 88w8xxx TOPDOG PCI/PCIe wireless parts. This initial version supports the 88w8687 802.11b/g PCIe part on channels 1-11, and only STA mode is currently implemented. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
1264b951 |
|
07-Feb-2009 |
Kalle Valo <kalle.valo@iki.fi> |
at76c50x-usb: add driver This is a driver for usb devices based on at76c50x chipset. This is a mac80211 port of the original at76_usb driver. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
49c1d208 |
|
17-Jan-2009 |
Andrey Borzenkov <arvidjaar@mail.ru> |
Move orinoco Kconfig entries into drivers/net/wireless/orinoco/Kconfig Since driver now lives in separate subdirectory, move Kconfig entries in own file so they can be tweaked indepndently. It complements "orinoco: Move sources to a subdirectory". Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
d2b21f19 |
|
09-Jan-2009 |
Colin McCabe <colin@cozybit.com> |
libertas: if_spi, driver for libertas GSPI devices Add initial support for libertas devices using a GSPI interface. This has been tested with the 8686. GSPI is intended to be used on embedded systems. Board-specific parameters are required (see libertas_spi.h). Thanks to everyone who took a look at the earlier versions of the patch. Signed-off-by: Colin McCabe <colin@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
8476a657 |
|
30-Dec-2008 |
Erik Ekman <erik@kryo.se> |
Wireless: Fix Kconfig fact error Raytheon cards use 2.4 GHz, not 2.4 MHz. See http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Linux.Wireless.drivers.html#Raylink Signed-off-by: Erik Ekman <erik@kryo.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
39d1ffee |
|
22-Nov-2008 |
David Kilroy <kilroyd@googlemail.com> |
orinoco: Provide option to avoid unnecessary fw caching Make firmware caching on startup optional, and make it default. When the option is not selected and PM_SLEEP is configured, then cache firmware in the suspend pm_notifier. This configuration saves about 64k RAM in normal use, but can lead to a situation where the driver is configured to use a different firmware. Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
c8f96974 |
|
12-Nov-2008 |
Larry Finger <Larry.Finger@lwfinger.net> |
rtl8187: Remove module warning and dependence on CONFIG_EXPERIMENTAL After considerable testing, the initial fears that the driver might damage some flavors of RTL8187B hardware seem to be groundless. Accordingly, the logged warning is removed. In addition, Kconfig is changed to remove the dependence on EXPERIMENTAL. Signed-off-by: Larry Finger <Larry.Finger@lwfinger> Acked-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
0795cd29 |
|
11-Nov-2008 |
John W. Linville <linville@tuxdriver.com> |
ipw2x00: relocate ipw2100/ipw2200 to common directory Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
50da3ead |
|
10-Nov-2008 |
John W. Linville <linville@tuxdriver.com> |
ipw2100, ipw2200: select LIB80211 Otherwise some configs can result in missing print_ssid... Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
7e272fcf |
|
24-Sep-2008 |
John W. Linville <linville@tuxdriver.com> |
wireless: consolidate on a single escape_essid implementation Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
23edcc41 |
|
21-Aug-2008 |
David Kilroy <kilroyd@gmail.com> |
orinoco: Add MIC on TX and check on RX Use the MIC algorithm from the crypto subsystem. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
3994d502 |
|
21-Aug-2008 |
David Kilroy <kilroyd@gmail.com> |
orinoco: Invoke firmware download in main driver Firmware download is enabled for Agere in orinoco_cs. Symbol firmware download has been moved out of spectrum_cs into orinoco_cs. Firmware download is not enabled for Intersil. Symbol based firmware is restricted to only download on spectrum_cs based cards. The firmware names are hardcoded for each firmware type. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
d9c63504 |
|
14-Aug-2008 |
Luis Carlos Cobo <luisca@cozybit.com> |
libertas_tf: config and makefile Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
f078f209 |
|
04-Aug-2008 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath9k: Add new Atheros IEEE 802.11n driver This adds the new mac80211 11n ath9k Atheros driver. Only STA support is currently enabled and tested. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Jack Howarth <howarth@bromo.msbb.uc.edu> Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
7c7e6af3 |
|
25-Jul-2008 |
Andrea Merello <andrea.merello@gmail.com> |
Rtl8187 PATCH add usb ID for asus wireless link This patch from Davide Cavalca adds a usb ID for an rtl8187L device. Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
a60f28fa |
|
18-Jul-2008 |
David S. Miller <davem@davemloft.net> |
Revert "remove the strip driver" This reverts commit 94d9842403f770239a656586442454b7a8f2df29. Alan says it's not appropriate to remove this driver, Adrian Bunk also agrees with this revert. Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5c036b21 |
|
07-Jul-2008 |
Hin-Tak Leung <hintak.leung@gmail.com> |
rtl8187: updating Kconfig to support RTL8187B Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
94d98424 |
|
05-Jun-2008 |
Adrian Bunk <bunk@kernel.org> |
remove the strip driver The latest trace about usage of this driver I found was an (unanswered) request for help by a user trying to get it working reliably five years ago with kernel 2.4 . And even if it was still working the use cases of this driver (requiring both the hardware and someone providing this kind of wireless network) have become practically nonexisting. This patch therefore removes the strip driver. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
acc1e7a3 |
|
11-Jun-2008 |
Jouni Malinen <j@w1.fi> |
mac80211_hwsim: 802.11 radio simulator for mac80211 mac80211_hwsim is a Linux kernel module that can be used to simulate arbitrary number of IEEE 802.11 radios for mac80211 on a single device. It can be used to test most of the mac80211 functionality and user space tools (e.g., hostapd and wpa_supplicant) in a way that matches very closely with the normal case of using real WLAN hardware. From the mac80211 view point, mac80211_hwsim is yet another hardware driver, i.e., no changes to mac80211 are needed to use this testing tool. Signed-off-by: Jouni Malinen <j@w1.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
fb269710 |
|
08-Apr-2008 |
Christian Lamparter <chunkeey@web.de> |
p54: move to separate directory Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
04850a47 |
|
26-Mar-2008 |
Holger Schurig <hs4233@mail.mn-solutions.de> |
libertas: don't depend on IEEE80211 Runtime-wise we only need escape_ssid from the deprecated IEEE80211 subsystem. However, it's easy to provide our own copy. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
7d579611 |
|
26-Mar-2008 |
Holger Schurig <hs4233@mail.mn-solutions.de> |
libertas: the compact flash driver is no longer experimental Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
2079fcdc |
|
04-Mar-2008 |
Adrian Bunk <bunk@kernel.org> |
the scheduled bcm43xx removal Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: <Larry.Finger@lwfinger.net> Cc: <stefano.brivio@polimi.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
19ae3a6a |
|
12-Feb-2008 |
Daniel Drake <dsd@gentoo.org> |
ipw2100/ipw2200: note firmware loading caveat in Kconfig help text Most wireless drivers load their firmware at interface open time, which generally occurs after the filesystem is available. However, the ipw drivers load their firmware at probe time because firmware is required to read the device MAC address. When built-in, probe happens before the filesystem is available, hence device init will only complete successfully if the user has made special arrangements (including firmware plus a loader in the initramfs). Note all this in the kconfig help text for both drivers. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
e9ddc0f2 |
|
04-Feb-2008 |
Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> |
ath5k: Use our own Kconfig file, we'll be expanding this shortly Apologoes, this is a re-post of patch-04, forgot to git-add our Kconfig... New series (only 2 patches needed fixing, which I am reposting) can be found here: http://kernel.org/pub/linux/kernel/people/mcgrof/patches/ath5k/2008-02-04.v2/ Use our own Kconfig file, we'll be expanding this shortly. Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
d8ee398d |
|
03-Feb-2008 |
Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> |
ath5k: Port to new bitrate/channel API Author: Nick Kossifidis <mickflemm@gmail.com> Tested on 5211, 5213+5112, 5213A+2112A and it wors fine. Also i figured out a way to process rate vallue found on status descriptors, it's still buggy but we are getting closer (i think it improved stability a little). Changes to hw.c, initvals.c, phy.c Changes-licensed-under: ISC Changes to ath5k.h, base.c, base.h Changes-licensed-under: 3-Clause-BSD Acked-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
8318d78a |
|
24-Jan-2008 |
Johannes Berg <johannes@sipsolutions.net> |
cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
bf164cc0 |
|
25-Jan-2008 |
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> |
Add new driver 'rndis_wlan' for wireless RNDIS devices. New driver for wireless RNDIS devices. So far only known chip that uses wireless RNDIS is Broadcom 4320. Driver detects all RNDIS devices that have RNDIS wireless physical medium. At least following devices are detected: Buffalo WLI-U2-KG125S U.S. Robotics USR5421 Belkin F5D7051 Linksys WUSB54GSv2 Linksys WUSB54GSC Asus WL169gE Eminent EM4045 BT Voyager 1055 Linksys WUSB54GSv1 U.S. Robotics USR5420 BUFFALO WLI-USB-G54 Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f6532111 |
|
14-Oct-2007 |
Michael Wu <flamingice@sourmilk.net> |
Add rtl8180 wireless driver This patch adds a mac80211 based wireless driver for the rtl8180 and rtl8185 PCI wireless cards. Also included are some rtl8187 changes required due to the relationship between that driver and this one. Michael Wu is primarily responsible for the initial driver and rtl8185 support. Andreas Merello provided the additional rtl8180 support. Thanks to Jukka Ruohonen for the donating a rtl8185 card! It was very helpful for the rtl8225z2 code. The Signed-off-by information below is collected from the individual patches submitted to wireless-2.6 before merging this driver upstream. Signed-off-by: Andrea Merello <andreamrl@tiscali.it> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
fa1c114f |
|
12-Aug-2007 |
Jiri Slaby <jirislaby@kernel.org> |
[PATCH] Net: add ath5k wireless driver add ath5k wireless driver Portions of this driver are covered by one or both of the ISC and 3-clause BSD licenses. Specific license information is cited at the top of each file. Acked-by and Signed-off-by information is collected from individual patches as collected in the wireless-2.6 tree prior to upstream submission. Acked-by: Matthew W. S. Bell <mentor@madwifi.org> Acked-by: Michael Taylor <mike.taylor@apprion.com> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bradley M. Kuhn <bkuhn@softwarefreedom.org> Signed-off-by: Bruno Randolf <bruno@thinktube.com> Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Francesco Gringoli <francesco.gringoli@ing.unibs.it> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Karen Sandler <karen@softwarefreedom.org> Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: Matt Norwood <norwood@softwarefreedom.org> Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Richard Fontana <fontana@softwarefreedom.org> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Ulrich Meis <meis@nets.rwth-aachen.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
889c94a1 |
|
20-Jan-2008 |
Johann Felix Soden <johfel@users.sourceforge.net> |
Fix file references in documentation and Kconfig Fix typo in arch/powerpc/boot/flatdevtree_env.h. There is no Documentation/networking/ixgbe.txt. README.cycladesZ is now in Documentation/. wavelan.p.h is now in drivers/net/wireless/. HFS.txt is now Documentation/filesystems/hfs.txt. OSS-files are now in sound/oss/. Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
7d2e941b |
|
18-Dec-2007 |
Michael Wu <flamingice@sourmilk.net> |
p54: add Kconfig description Some people would like to know what p54 is. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
aaf44a06 |
|
13-Dec-2007 |
Dan Williams <dcbw@redhat.com> |
libertas: select WIRELESS_EXT Ensure that libertas selects WIRELESS_EXT, since selecting other stuff that should depend on WEXT, like IEEE80211, doesn't seem to drag that in for us. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
0f39c4ab |
|
02-Nov-2007 |
John W. Linville <linville@tuxdriver.com> |
hermes: clarify Intel reference in Kconfig help The Intel device supported by the hermes driver core is the IPW2011. The "Intel PRO/Wireless" wording suggests the later Centrino devices and may be confusing to some users. Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
727c26ed |
|
17-Oct-2007 |
Pierre Ossman <drzeus@drzeus.cx> |
net: libertas sdio driver Add driver for Marvell's Libertas 8385 and 8686 wifi chips. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Acked-by: Dan Williams <dcbw@redhat.com>
|
#
eff1a59c |
|
25-Sep-2007 |
Michael Wu <flamingice@sourmilk.net> |
[P54]: add mac80211-based driver for prism54 softmac hardware Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
95ea3627 |
|
25-Sep-2007 |
Ivo van Doorn <IvDoorn@gmail.com> |
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b481de9c |
|
25-Sep-2007 |
Zhu Yi <yi.zhu@intel.com> |
[IWLWIFI]: add iwlwifi wireless drivers This patch adds the mac80211 based wireless drivers for the Intel PRO/Wireless 3945ABG/BG Network Connection and Intel Wireless WiFi Link AGN (4965) adapters. [ Move driver into it's own directory -DaveM ] Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
75388acd |
|
25-Sep-2007 |
Larry Finger <Larry.Finger@lwfinger.net> |
[B43LEGACY]: add mac80211-based driver for legacy BCM43xx devices Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e4d6b795 |
|
18-Sep-2007 |
Michael Buesch <mb@bu3sch.de> |
[B43]: add mac80211-based driver for modern BCM43xx devices Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
27590d06 |
|
03-Oct-2007 |
Holger Schurig <hs4233@mail.mn-solutions.de> |
[PATCH] add support for Marvell 8385 CF cards This patch adds support for Marvell based 8385 compact flash cards. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cfbde697 |
|
22-Jul-2007 |
Faidon Liambotis <paravoid@debian.org> |
[PATCH] Kconfig: remove references of pcmcia-cs pcmcia-cs/cardmgr is deprecated and mentioning it in the help text is misleading. Signed-off-by: Faidon Liambotis <paravoid@debian.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
e12dcb05 |
|
22-Jul-2007 |
Faidon Liambotis <paravoid@debian.org> |
[PATCH] Kconfig: order options Reorder the Atmel options so that the menu appears saner. Before: < > Hermes chipset 802.11b support (Orinoco/Prism2/Symbol) <*> Atmel at76c50x chipset 802.11b support < > Atmel at76c506 PCI cards (NEW) < > Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards < > Atmel at76c502/at76c504 PCMCIA cards (NEW) After: < > Hermes chipset 802.11b support (Orinoco/Prism2/Symbol) <*> Atmel at76c50x chipset 802.11b support < > Atmel at76c506 PCI cards (NEW) < > Atmel at76c502/at76c504 PCMCIA cards (NEW) < > Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards Signed-off-by: Faidon Liambotis <paravoid@debian.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
cc0b88cf |
|
30-Aug-2007 |
Michael Wu <flamingice@sourmilk.net> |
[PATCH] Add adm8211 802.11b wireless driver This patch adds a mac80211 wireless driver for ADMtek ADM8211 based wireless cards. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
605bebe2 |
|
13-May-2007 |
Michael Wu <flamingice@sourmilk.net> |
[PATCH] Add rtl8187 wireless driver This patch adds a mac80211 based wireless driver for the rtl8187 USB wireless card. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
d8efea25 |
|
28-May-2007 |
Dan Williams <dcbw@redhat.com> |
[PATCH] libertas: remove structure WLAN_802_11_SSID and libertas_escape_essid Replace WLAN_802_11_SSID with direct 'ssid' and 'ssid_len' members like ieee80211. In the process, remove private libertas_escape_essid and depend on the ieee80211 implementation of escape_essid instead. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
084708b6 |
|
24-May-2007 |
Holger Schurig <hs4233@mail.mn-solutions.de> |
[PATCH] libertas: split module into two (libertas.ko and usb8xxx.ko) * add CONFIG_LIBERTAS to Kconfig * remove global variable libertas_fw_name, the USB module might want to use a different default FW name than the CF module, so libertas_fw_name is now local to if_usb.c * exported some symbols as GPL Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
f54bfc0e |
|
10-May-2007 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] Kconfig: no wireless on s390. Hide the config menues for wireless on s390. Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
42b1c8cc |
|
28-Apr-2007 |
John W. Linville <linville@tuxdriver.com> |
libertas: fix for wireless Kconfig changes Need to change the libertas Kconfig entry to match changes made for other wireless drivers. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
#
39f5fb30 |
|
16-Mar-2007 |
Alexander E. Patrakov <patrakov@ums.usu.ru> |
kconfig: fix path to modules.txt in Kconfig help Documentation/modules.txt doesn't exist, but Documentation/kbuild/modules.txt does. Signed-off-by: Alexander E. Patrakov Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
#
876c9d3a |
|
09-Feb-2007 |
Marcelo Tosatti <marcelo@kvack.org> |
[PATCH] Marvell Libertas 8388 802.11b/g USB driver Add the Marvell Libertas 8388 802.11 USB driver. Signed-off-by: Marcelo Tosatti <marcelo@kvack.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
42431592 |
|
23-Apr-2007 |
John W. Linville <linville@tuxdriver.com> |
[WIRELESS] drivers/net/wireless/Kconfig: correct minor typo Correct minor typo in drivers/net/wireless/Kconfig identified by Stefano Brivio <stefano.brivio@polimi.it>. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2a5e1c0e |
|
23-Apr-2007 |
Johannes Berg <johannes@sipsolutions.net> |
[WIRELESS]: Refactor wireless Kconfig. This patch refactors the wireless Kconfig all over and already introduces net/wireless/Kconfig with just the WEXT bit for now, the cfg80211 patch will add to that as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
09509603 |
|
03-Oct-2006 |
Matt LaPlante <kernel1@cyberdogtech.com> |
Fix several typos in drivers/ Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
#
01d47833 |
|
20-Aug-2006 |
Zhu Yi <yi.zhu@intel.com> |
[PATCH] ipw2200: always enable frequently used debugging code Moving part of the debugging code from IPW_DEBUG to IPW_LL_DEBUG (low level debugging) and make IPW_DEBUG be always enabled. IPW_LL_DEBUG still needs to be enabled by selecting CONFIG_IPW2200_DEBUG. But it is highly deprecated for normal users since it adds higher debug verbosity in driver hot paths. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
8fa9ea18 |
|
05-Jul-2006 |
Robert Schulze <rob@net-pr.de> |
[PATCH] airo: should select crypto_aes The driver airo (for Cisco Wlan-Cards) complains about "failed to load transform for AES", when it is loaded and CRYPTO_AES is not selected in Kconfig. Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
e85d0918 |
|
02-Jun-2006 |
Daniel Drake <dsd@gentoo.org> |
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
5c601d0c |
|
05-Jun-2006 |
Pavel Machek <pavel@suse.cz> |
[PATCH] wireless: move zd1201 where it belongs zd1201 is wifi adapter, yet it is hiding in drivers/usb/net where noone can find it. This moves Kconfig/Makefile zd1201 to the right place. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
34f8ae46 |
|
13-Apr-2006 |
Zhu Yi <yi.zhu@intel.com> |
[PATCH] wireless Kconfig add IPW2200_RADIOTAP Makefile both IPW2200_RADIOTAP and IPW2200_PROMISCUOUS depend on IPW2200_MONITOR. Let IPW2200_PROMISCUOUS select IPW2200_RADIOTAP. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
e43e3c1e |
|
13-Apr-2006 |
Zhu Yi <yi.zhu@intel.com> |
[PATCH] ipw2200: rename CONFIG_IPW_QOS to CONFIG_IPW2200_QOS Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
d685b8c2 |
|
13-Apr-2006 |
Zhu Yi <yi.zhu@intel.com> |
[PATCH] ipw2200: Enable rtap interface for RF promiscuous mode while associated With this patch, a new promiscuous mode is enabled. If the module is loaded with the rtap_iface=1 module parameter, two interfaces will be created (instead of just one). The second interface is prefixed 'rtap' and provides received 802.11 frames on the current channel to user space in a radiotap header format. Example usage: % modprobe ipw2200 rtap_iface=1 % iwconfig eth1 essid MyNetwork % dhcpcd eth1 % tcpdump -i rtap0 If you do not specify 'rtap_iface=1' then the rtap interface will not be created and you will need to turn it on via: % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface You can filter out what type of information is passed to user space via the rtap_filter sysfs entry. Currently you can tell the driver to transmit just the headers (which will provide the RADIOTAP and IEEE 802.11 header but not the payload), to filter based on frame control type (Management, Control, or Data), and whether to report transmitted frames, received frames, or both. The transmit frame reporting is based on a patch by Stefan Rompf. Filters can be get and set via a sysfs interface. For example, set the filter to only send headers (0x7), don't report Tx'd frames (0x10), and don't report data frames (0x100): % echo 0x117 > /sys/bus/pci/drivers/ipw2200/*/rtap_filter All your packets are belong to us: % tethereal -n -i rtap0 Signed-off-by: James Ketrenos <jketreno@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
c1783454 |
|
04-Apr-2006 |
Jean Tourrilhes <jt@hpl.hp.com> |
[PATCH] Revert NET_RADIO Kconfig title change 2.6.17-rc1 changed the title for the entry CONFIG_NET_RADIO. I personally disagree with this change and want it reverted. Patch for 2.6.17-rc1. Rationale : WIRELESS_EXT is an invisible option. Therefore, the only way for a user to enable it is via NET_RADIO. Some users need to do that for out-of-tree drivers. Therefore it should be mentionned in the title of the option. Rationale2 : the option just below is called "Wireless Extension API over RtNetlink". Some users may confuse this option for the main "Wireless Extension" option. Therefore reverting this change help disambiguate the relation between those two options. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
694a464e |
|
31-Mar-2006 |
Al Viro <viro@zeniv.linux.org.uk> |
[PATCH] uml: kconfigs kconfig sanitized around drivers/net Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
e4a9af98 |
|
24-Mar-2006 |
Adrian Bunk <bunk@stusta.de> |
[PATCH] PCMCIA_SPECTRUM must select FW_LOADER PCMCIA_SPECTRUM must select FW_LOADER. Reported by "Alexander E. Patrakov" <patrakov@ums.usu.ru>. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
f1f56623 |
|
12-Feb-2006 |
Michael Buesch <mbuesch@freenet.de> |
[PATCH] Apple Airport: Add Kconfig note that the bcm43xx driver has to be used for Airport Extreme cards. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
77db31ea |
|
12-Feb-2006 |
Michael Buesch <mbuesch@freenet.de> |
[PATCH] bcm43xx: Partially fix PIO code. Add Kconfig option for PIO or DMA mode (or both). Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
6f3e2045 |
|
30-Jan-2006 |
Michael Buesch <mbuesch@freenet.de> |
[PATCH] bcm43xx: add DEBUG Kconfig option. Also fix indention. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
70e5e983 |
|
23-Jan-2006 |
John W. Linville <linville@tuxdriver.com> |
[PATCH] bcm43xx: patch Kconfig and wireless/Makefile for import Patch Kconfig and wireless/Makefile to merge bcm43xx 'properly' Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
868d2c1e |
|
24-Mar-2006 |
Dave Jones <davej@redhat.com> |
[WIRELESS]: Fix config dependencies. I accidentally ended up with a config that set NET_RADIO off, and NET_WIRELESS_RTNETLINK on, which blew up thus.. net/built-in.o: In function `do_setlink':net/core/rtnetlink.c:479: undefined reference to `wireless_rtnetlink_set' net/built-in.o: In function `do_getlink':net/core/rtnetlink.c:521: undefined reference to `wireless_rtnetlink_get' Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
711e2c33 |
|
22-Feb-2006 |
Jean Tourrilhes <jt@hpl.hp.com> |
[PATCH] WE-20 for kernel 2.6.16 This is version 20 of the Wireless Extensions. This is the completion of the RtNetlink work I started early 2004, it enables the full Wireless Extension API over RtNetlink. Few comments on the patch : o totally driver transparent, no change in drivers needed. o iwevent were already RtNetlink based since they were created (around 2.5.7). This adds all the regular SET and GET requests over RtNetlink, using the exact same mechanism and data format as iwevents. o This is a Kconfig option, as currently most people have no need for it. Surprisingly, patch is actually small and well encapsulated. o Tested on SMP, attention as been paid to make it 64 bits clean. o Code do probably too many checks and could be further optimised, but better safe than sorry. o RtNetlink based version of the Wireless Tools available on my web page for people inclined to try out this stuff. I would also like to thank Alexey Kuznetsov for his helpful suggestions to make this patch better. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
47c51431 |
|
12-Feb-2006 |
Jon Mason <jdmason@us.ibm.com> |
[PATCH] trivial: fix spelling errors in Kconfigs This patch corrects a few spelling and grammar errors found in drivers/net Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
2c0f6316 |
|
05-Jan-2006 |
Andreas Happe <andreashappe@snikt.net> |
[PATCH] ipw2200: add monitor and qos entries to Kconfig I have made a stupid copy&paste error: QoS option is named IPW_QOS not IPW2200_MONITOR. Spotted by Daniel Paschka, thanks. Add the following config entries for the ipw2200 driver to drivers/net/wireless/Kconfig * IPW2200_MONITOR enables Monitor mode * IPW_QOS enables QoS feature - this is under development right now, so it depends upon EXPERIMENTAL Signed-off-by: Andreas Happe <andreashappe@snikt.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
4ddc1651 |
|
05-Feb-2006 |
Jan Niehusmann <jan@gondor.com> |
[PATCH] let IPW2{1,2}00 select IEEE80211 This patch makes the IPW2100 and IPW2200 options available in the configuration menu even if IEEE80211 has not been selected before. This behaviour is more intuitive for people which are not familiar with the driver internals. The suggestion for this change was made by Alejandro Bonilla Beeche. Signed-off-by: Jan Niehusmann <jan@gondor.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
afcd0241 |
|
10-Feb-2006 |
Jesper Juhl <jesper.juhl@gmail.com> |
[PATCH] wrong firmware location in IPW2100 Kconfig entry Firmware should go into /lib/firmware, not /etc/firmware. Found by Alejandro Bonilla. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
a39d3e79 |
|
20-Jan-2006 |
Adrian Bunk <bunk@stusta.de> |
[PATCH] AIRO{,_CS} <-> CRYPTO fixes CRYPTO is a helper variable, and to make it easier for users, it should therefore select'ed and not be listed in the dependencies. drivers/net/wireless/airo.c requires CONFIG_CRYPTO for compilations. Therefore, AIRO_CS also has to CRYPTO. Additionally, this patch removes the #ifdef's for the non-compiling CRYPTO=n case from drivers/net/wireless/airo.c. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
d86b5e0e |
|
20-Jan-2006 |
Adrian Bunk <bunk@stusta.de> |
[PATCH] net/: fix the WIRELESS_EXT abuse This patch contains the following changes: - add a CONFIG_WIRELESS_EXT select'ed by NET_RADIO for conditional code - remove the now no longer required #ifdef CONFIG_NET_RADIO from some #include's Based on a patch by Jean Tourrilhes <jt@hpl.hp.com>. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
a8e82ef9 |
|
14-Jan-2006 |
Adrian Bunk <bunk@stusta.de> |
drivers/net/{,wireless/}Kconfig: remove dead URL shadow.cabi.net does no longer exist. Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
#
9c782e3b |
|
14-Jan-2006 |
Alex Shepard <ashepard@u.washington.edu> |
Spelling fix in IPW2100 and IPW2200 Kconfig entries s/remvoed/removed/ Signed-off-by: Alex Shepard <ashepard@u.washington.edu> Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
#
9ad8b9d1 |
|
11-Jan-2006 |
dann frazier <dannf@dannf.org> |
[PATCH] CONFIG_AIRO needs CONFIG_CRYPTO airo.c currently has MICSUPPORT enabled, which requires CONFIG_CRYPTO. A user reported a build failure which is due to the lack of a Kconfig dependency. See http://bugs.debian.org/344205. This patch makes Kconfig enforce this dependency. Signed-off-by: dann frazier <dannf@debian.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
|
#
0f52bf90 |
|
01-Dec-2005 |
Brice Goglin <Brice.Goglin@ens-lyon.org> |
[PATCH] Duplicate IPW_DEBUG option for ipw2100 and 2200 There are currently two IPW_DEBUG options in drivers/net/wireless/Kconfig (one for ipw2100 and one for ipw2200). The attached patch splits it into IPW2100_DEBUG and IPW2200_DEBUG. Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org> Cc: "James P. Ketrenos" <ipw2100-admin@linux.intel.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
|
#
c75f4742 |
|
01-Dec-2005 |
Takis <panagiotis.issaris@gmail.com> |
[PATCH] ipw2200: kzalloc conversion and Kconfig dependency fix - Use kzalloc for IPW2200 - Fix config dependency for IPW2200 Signed-off-by: Panagiotis Issaris <takis@issaris.org> Cc: James Ketrenos <jketreno@linux.intel.com> Cc: Yi Zhu <yi.zhu@intel.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
|
#
b16a228d |
|
30-Oct-2005 |
Simon Kelley <simon@thekelleys.org.uk> |
[PATCH] Atmel wireless update * Merge PCMCIA card table with new Brodowski PCMCIA id table. * Add missing entries to PCMCIA id table. * Other tweaks to conform with Documentation/driver-changes.txt (types, call request_region, etc) * Fix size of requested IO region. * Reduce printk verbosity. * Remove EXPERIMENTAL * tweak to association code - don't force shared key authentication when wep in use. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
|
#
6593b58c |
|
14-Oct-2005 |
Matteo Croce <3297627799@wind.it> |
[PATCH] wireless/airo: Build fix The aironet PCI driver has a build dependency on ISA that prevent the driver to compile on systems that doesn't support ISA, like x86_64. The driver really doesn't depend on ISA, it does some ISA stuff in the initialization code, since the driver supports both ISA and PCI cards. So the driver should depend on ISA_DMA_API to build on all systems, and this will not hurt PCI at all. Signed-off-by: Matteo Croce <3297627799@wind.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
3a48c4c2 |
|
01-Sep-2005 |
Pavel Roskin <proski@gnu.org> |
[PATCH] orinoco: New driver - spectrum_cs. Signed-off-by: Pavel Roskin <proski@gnu.org> diff-tree dee4f325520d4ea29397dd67ca657b7235bb1790 (from c88faac230cc9775445e5c644991c352e35c72a1) Author: Pavel Roskin <proski@gnu.org> Date: Thu Sep 1 17:46:39 2005 -0400 New driver - spectrum_cs. Driver for 802.11b cards using RAM-loadable Symbol firmware, such as Symbol Wireless Networker LA4100, CompactFlash cards by Socket Communications and Intel PRO/Wireless 2011B. The driver implements Symbol firmware download. The rest is handled in hermes.c and orinoco.c. Utilities for downloading the Symbol firmware are available at http://sourceforge.net/projects/orinoco/ Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
|
#
ec829051 |
|
01-Sep-2005 |
Pavel Roskin <proski@gnu.org> |
[PATCH] orinoco: New driver - orinoco_nortel. Signed-off-by: Pavel Roskin <proski@gnu.org> diff-tree dce61aef99ceb57370b70222dc34d788666c0ac3 (from ceb6695092be8dcdfe2dec6ee5097d613011489d) Author: Pavel Roskin <proski@gnu.org> Date: Thu Sep 1 15:50:55 2005 -0400 New driver - orinoco_nortel. This is a driver for Nortel emobility PCI adaptors, which consist of an Orinoco compatible PCMCIA card and a simple PCI-to-PCMCIA bridge. The driver initializes the device and uses Orinoco core driver for actual wireless networking. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
|
#
8c09e16b |
|
01-Sep-2005 |
Pavel Roskin <proski@gnu.org> |
[PATCH] orinoco: Remove EXPERIMENTAL mark from PLX_HERMES, TMD_HERMES and PCI_HERMES. Signed-off-by: Pavel Roskin <proski@gnu.org> diff-tree ceb6695092be8dcdfe2dec6ee5097d613011489d (from 6b39374a27eb4be7e9d82145ae270ba02ea90dc8) Author: Pavel Roskin <proski@gnu.org> Date: Thu Sep 1 14:50:10 2005 -0400 Remove EXPERIMENTAL mark from PLX_HERMES, TMD_HERMES and PCI_HERMES. Those drivers have been used for a long time, and there have been very few problem reports. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
|
#
53788015 |
|
25-Aug-2005 |
Jiri Benc <jbenc@suse.cz> |
ipw2100: Fix incorrectly named config option. Signed-off-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: Jirka Bohac <jbohac@suse.cz>
|
#
ab62c1e1 |
|
23-Aug-2005 |
Al Viro <viro@www.linux.org.uk> |
[PATCH] Kconfig fix (airo_cs on m32r) airo_cs is broken on m32r; marked as such. [Proper fix would involve separating PCI-dependent parts and making sure they don't get in the way _and_ arranging for asm/scatterlist.h getting picked on m32r] Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
e19b813e |
|
03-Jun-2005 |
Adrian Bunk <bunk@stusta.de> |
[PATCH] ieee80211: fix recursive ipw2200 dependencies This results in recursive dependencies: - IPW2200 depends on NET_RADIO - IPW2200 selects IEEE80211 - IEEE80211 selects NET_RADIO This patch fixes the IPW2200 dependencies in a way that they are similar to the IPW2100 dependencies. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jiri Benc <jbenc@suse.cz>
|
#
43f66a6c |
|
24-Mar-2005 |
James Ketrenos <jketreno@linux.intel.com> |
Add ipw2200 wireless driver.
|
#
2c86c275 |
|
23-Mar-2005 |
James Ketrenos <jketreno@linux.intel.com> |
Add ipw2100 wireless driver.
|
#
c8920ba0 |
|
05-May-2005 |
Daniel Andersen <daniel@linux-user.net> |
[PATCH] wireless: 3CRWE154G72 Kconfig help fix Version 2 of the 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 is not supported by the prism54 project. To stop confusion, the kernel documentation should state so as 3com made a good job hiding the version. Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN drivers/net/wireless/Kconfig~wireless-3crwe154g72-kconfig-help-fix drivers/net/wireless/Kconfig
|
#
ff1d2767 |
|
12-May-2005 |
Jouni Malinen <jkmaline@cc.hut.fi> |
Add HostAP wireless driver. Includes minor cleanups from Adrian Bunk <bunk@stusta.de>.
|
#
1da177e4 |
|
16-Apr-2005 |
Linus Torvalds <torvalds@ppc970.osdl.org> |
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
|