#
32fa4366 |
|
15-Mar-2024 |
Nikita Kiryushin <kiryushin@ancud.ru> |
net: phy: fix phy_read_poll_timeout argument type in genphy_loopback read_poll_timeout inside phy_read_poll_timeout can set val negative in some cases (for example, __mdiobus_read inside phy_read can return -EOPNOTSUPP). Supposedly, commit 4ec732951702 ("net: phylib: fix phy_read*_poll_timeout()") should fix problems with wrong-signed vals, but I do not see how as val is sent to phy_read as is and __val = phy_read (not val) is checked for sign. Change val type for signed to allow better error handling as done in other phy_read_poll_timeout callers. This will not fix any error handling by itself, but allows, for example, to modify cond with appropriate sign check or check resulting val separately. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 014068dcb5b1 ("net: phy: genphy_loopback: add link speed configuration") Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240315175052.8049-1-kiryushin@ancud.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
#
4469c0c5 |
|
06-Mar-2024 |
Kévin L'hôpital <kevin.lhopital@savoirfairelinux.com> |
net: phy: fix phy_get_internal_delay accessing an empty array The phy_get_internal_delay function could try to access to an empty array in the case that the driver is calling phy_get_internal_delay without defining delay_values and rx-internal-delay-ps or tx-internal-delay-ps is defined to 0 in the device-tree. This will lead to "unable to handle kernel NULL pointer dereference at virtual address 0". To avoid this kernel oops, the test should be delay >= 0. As there is already delay < 0 test just before, the test could only be size == 0. Fixes: 92252eec913b ("net: phy: Add a helper to return the index for of the internal delay") Co-developed-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Signed-off-by: Kévin L'hôpital <kevin.lhopital@savoirfairelinux.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
49168d19 |
|
02-Mar-2024 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: Add phy_support_eee() indicating MAC support EEE In order for EEE to operate, both the MAC and the PHY need to support it, similar to how pause works. With some exception - a number of PHYs have SmartEEE or AutoGrEEEn support in order to provide some EEE-like power savings with non-EEE capable MACs. Copy the pause concept and add the call phy_support_eee() which the MAC makes after connecting the PHY to indicate it supports EEE. phylib will then advertise EEE when auto-neg is performed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20240302195306.3207716-6-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
ef6ee3a3 |
|
14-Feb-2024 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: add PHY_EEE_CAP2_FEATURES As a prerequisite for adding EEE CAP2 register support, complement PHY_EEE_CAP1_FEATURES with PHY_EEE_CAP2_FEATURES. For now only 2500baseT and 5000baseT modes are supported. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
81800aef |
|
13-Feb-2024 |
Ricardo B. Marliere <ricardo@marliere.net> |
net: mdio_bus: make mdio_bus_type const Since commit d492cc2573a0 ("driver core: device.h: make struct bus_type a const *"), the driver core can properly handle constant struct bus_type, move the mdio_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240213-bus_cleanup-mdio-v1-1-f9e799da7fda@marliere.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
#
9b1d5e05 |
|
06-Feb-2024 |
Christian Marangi <ansuelsmth@gmail.com> |
net: phy: provide whether link has changed in c37_read_status Some PHY driver might require additional regs call after genphy_c37_read_status() is called. Expand genphy_c37_read_status to provide a bool wheather the link has changed or not to permit PHY driver to skip additional regs call if nothing has changed. Every user of genphy_c37_read_status() is updated with the new additional bool. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
471e8fd3 |
|
06-Feb-2024 |
Christian Marangi <ansuelsmth@gmail.com> |
net: phy: add devm/of_phy_package_join helper Add devm/of_phy_package_join helper to join PHYs in a PHY package. These are variant of the manual phy_package_join with the difference that these will use DT nodes to derive the base_addr instead of manually passing an hardcoded value. An additional value is added in phy_package_shared, "np" to reference the PHY package node pointer in specific PHY driver probe_once and config_init_once functions to make use of additional specific properties defined in the PHY package node in DT. The np value is filled only with of_phy_package_join if a valid PHY package node is found. A valid PHY package node must have the node name set to "ethernet-phy-package". Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
17b44753 |
|
04-Feb-2024 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: c45 scanning: Don't consider -ENODEV fatal When scanning the MDIO bus for C22 devices, the driver returning -ENODEV is not considered fatal, it just indicates the MDIO bus master knows there is no device at that address, maybe because of hardware limitation. Make the C45 scan code act on -ENODEV the same way, to make C22 and C45 more uniform. It is expected all reads for a given address will return -ENODEV, so within get_phy_c45_ids() only the first place a read occurs has been changed. Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b6469127 |
|
03-Feb-2024 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: add helper phy_advertise_eee_all Per default phylib preserves the EEE advertising at the time of phy probing. The EEE advertising can be changed from user space, in addition this helper allows to set the EEE advertising to all supported modes from drivers in kernel space. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20bfc471-aeeb-4ae4-ba09-7d6d4be6b86a@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
0bd199fd |
|
02-Feb-2024 |
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
net: phy: constify phydev->drv Device driver structures are shared between all devices that they match, and thus nothing should never write to the device driver structure through the phydev->drv pointer. Let's make this pointer const to catch code that attempts to do so. Suggested-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1rVxXt-002YqY-9G@rmk-PC.armlinux.org.uk Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
#
61c81872 |
|
29-Jan-2024 |
Andre Werner <andre.werner@systec-electronic.com> |
net: phy: phy_device: Prevent nullptr exceptions on ISR If phydev->irq is set unconditionally, check for valid interrupt handler or fall back to polling mode to prevent nullptr exceptions in interrupt service routine. Signed-off-by: Andre Werner <andre.werner@systec-electronic.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240129135734.18975-2-andre.werner@systec-electronic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
7ae215ee |
|
25-Jan-2024 |
Christian Marangi <ansuelsmth@gmail.com> |
net: phy: add support for PHY LEDs polarity modes Add support for PHY LEDs polarity modes. Some PHY require LED to be set to active low to be turned ON. Adds support for this by declaring active-low property in DT. PHY driver needs to declare .led_polarity_set() to configure LED polarity modes. Function will pass the index with the LED index and a bitmap with all the required modes to set. Current supported modes are: - active-low with the flag PHY_LED_ACTIVE_LOW. LED is set to active-low to turn it ON. - inactive-high-impedance with the flag PHY_LED_INACTIVE_HIGH_IMPEDANCE. LED is set to high impedance to turn it OFF. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240125203702.4552-4-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
fe1eb24b |
|
04-Jan-2024 |
Jakub Kicinski <kuba@kernel.org> |
Revert "Introduce PHY listing and link_topology tracking" This reverts commit 32bb4515e34469975abc936deb0a116c4a445817. This reverts commit d078d480639a4f3b5fc2d56247afa38e0956483a. This reverts commit fcc4b105caa4b844bf043375bf799c20a9c99db1. This reverts commit 345237dbc1bdbb274c9fb9ec38976261ff4a40b8. This reverts commit 7db69ec9cfb8b4ab50420262631fb2d1908b25bf. This reverts commit 95132a018f00f5dad38bdcfd4180d1af955d46f6. This reverts commit 63d5eaf35ac36cad00cfb3809d794ef0078c822b. This reverts commit c29451aefcb42359905d18678de38e52eccb3bb5. This reverts commit 2ab0edb505faa9ac90dee1732571390f074e8113. This reverts commit dedd702a35793ab462fce4c737eeba0badf9718e. This reverts commit 034fcc210349b873ece7356905be5c6ca11eef2a. This reverts commit 9c5625f559ad6fe9f6f733c11475bf470e637d34. This reverts commit 02018c544ef113e980a2349eba89003d6f399d22. Looks like we need more time for reviews, and incremental changes will be hard to make sense of. So revert. Link: https://lore.kernel.org/all/ZZP6FV5sXEf+xd58@shell.armlinux.org.uk/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
034fcc21 |
|
21-Dec-2023 |
Maxime Chevallier <maxime.chevallier@bootlin.com> |
net: phy: add helpers to handle sfp phy connect/disconnect There are a few PHY drivers that can handle SFP modules through their sfp_upstream_ops. Introduce Phylib helpers to keep track of connected SFP PHYs in a netdevice's namespace, by adding the SFP PHY to the upstream PHY's netdev's namespace. By doing so, these SFP PHYs can be enumerated and exposed to users, which will be able to use their capabilities. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9c5625f5 |
|
21-Dec-2023 |
Maxime Chevallier <maxime.chevallier@bootlin.com> |
net: sfp: pass the phy_device when disconnecting an sfp module's PHY Pass the phy_device as a parameter to the sfp upstream .disconnect_phy operation. This is preparatory work to help track phy devices across a net_device's link. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
02018c54 |
|
21-Dec-2023 |
Maxime Chevallier <maxime.chevallier@bootlin.com> |
net: phy: Introduce ethernet link topology representation Link topologies containing multiple network PHYs attached to the same net_device can be found when using a PHY as a media converter for use with an SFP connector, on which an SFP transceiver containing a PHY can be used. With the current model, the transceiver's PHY can't be used for operations such as cable testing, timestamping, macsec offload, etc. The reason being that most of the logic for these configuration, coming from either ethtool netlink or ioctls tend to use netdev->phydev, which in multi-phy systems will reference the PHY closest to the MAC. Introduce a numbering scheme allowing to enumerate PHY devices that belong to any netdev, which can in turn allow userspace to take more precise decisions with regard to each PHY's configuration. The numbering is maintained per-netdev, in a phy_device_list. The numbering works similarly to a netdevice's ifindex, with identifiers that are only recycled once INT_MAX has been reached. This prevents races that could occur between PHY listing and SFP transceiver removal/insertion. The identifiers are assigned at phy_attach time, as the numbering depends on the netdevice the phy is attached to. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9eea577e |
|
15-Dec-2023 |
Christian Marangi <ansuelsmth@gmail.com> |
net: phy: extend PHY package API to support multiple global address Current API for PHY package are limited to single address to configure global settings for the PHY package. It was found that some PHY package (for example the qca807x, a PHY package that is shipped with a bundle of 5 PHY) requires multiple PHY address to configure global settings. An example scenario is a PHY that have a dedicated PHY for PSGMII/serdes calibrarion and have a specific PHY in the package where the global PHY mode is set and affects every other PHY in the package. Change the API in the following way: - Change phy_package_join() to take the base addr of the PHY package instead of the global PHY addr. - Make __/phy_package_write/read() require an additional arg that select what global PHY address to use by passing the offset from the base addr passed on phy_package_join(). Each user of this API is updated to follow this new implementation following a pattern where an enum is defined to declare the offset of the addr. We also drop the check if shared is defined as any user of the phy_package_read/write is expected to use phy_package_join first. Misuse of this will correctly trigger a kernel panic for NULL pointer exception. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
df16c1c5 |
|
27-Nov-2023 |
Andrew Halaney <ahalaney@redhat.com> |
net: phy: mdio_device: Reset device only when necessary Currently the phy reset sequence is as shown below for a devicetree described mdio phy on boot: 1. Assert the phy_device's reset as part of registering 2. Deassert the phy_device's reset as part of registering 3. Deassert the phy_device's reset as part of phy_probe 4. Deassert the phy_device's reset as part of phy_hw_init The extra two deasserts include waiting the deassert delay afterwards, which is adding unnecessary delay. This applies to both possible types of resets (reset controller reference and a reset gpio) that can be used. Here's some snipped tracing output using the following command line params "trace_event=gpio:* trace_options=stacktrace" illustrating the reset handling and where its coming from: /* Assert */ systemd-udevd-283 [002] ..... 6.780434: gpio_value: 544 set 0 systemd-udevd-283 [002] ..... 6.783849: <stack trace> => gpiod_set_raw_value_commit => gpiod_set_value_nocheck => gpiod_set_value_cansleep => mdio_device_reset => mdiobus_register_device => phy_device_register => fwnode_mdiobus_phy_device_register => fwnode_mdiobus_register_phy => __of_mdiobus_register => stmmac_mdio_register => stmmac_dvr_probe => stmmac_pltfr_probe => devm_stmmac_pltfr_probe => qcom_ethqos_probe => platform_probe /* Deassert */ systemd-udevd-283 [002] ..... 6.802480: gpio_value: 544 set 1 systemd-udevd-283 [002] ..... 6.805886: <stack trace> => gpiod_set_raw_value_commit => gpiod_set_value_nocheck => gpiod_set_value_cansleep => mdio_device_reset => phy_device_register => fwnode_mdiobus_phy_device_register => fwnode_mdiobus_register_phy => __of_mdiobus_register => stmmac_mdio_register => stmmac_dvr_probe => stmmac_pltfr_probe => devm_stmmac_pltfr_probe => qcom_ethqos_probe => platform_probe /* Deassert */ systemd-udevd-283 [002] ..... 6.882601: gpio_value: 544 set 1 systemd-udevd-283 [002] ..... 6.886014: <stack trace> => gpiod_set_raw_value_commit => gpiod_set_value_nocheck => gpiod_set_value_cansleep => mdio_device_reset => phy_probe => really_probe => __driver_probe_device => driver_probe_device => __device_attach_driver => bus_for_each_drv => __device_attach => device_initial_probe => bus_probe_device => device_add => phy_device_register => fwnode_mdiobus_phy_device_register => fwnode_mdiobus_register_phy => __of_mdiobus_register => stmmac_mdio_register => stmmac_dvr_probe => stmmac_pltfr_probe => devm_stmmac_pltfr_probe => qcom_ethqos_probe => platform_probe /* Deassert */ NetworkManager-477 [000] ..... 7.023144: gpio_value: 544 set 1 NetworkManager-477 [000] ..... 7.026596: <stack trace> => gpiod_set_raw_value_commit => gpiod_set_value_nocheck => gpiod_set_value_cansleep => mdio_device_reset => phy_init_hw => phy_attach_direct => phylink_fwnode_phy_connect => __stmmac_open => stmmac_open There's a lot of paths where the device is getting its reset asserted and deasserted. Let's track the state and only actually do the assert/deassert when it changes. Reported-by: Sagar Cheluvegowda <quic_scheluve@quicinc.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20231127-net-phy-reset-once-v2-1-448e8658779e@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
243ad8df |
|
23-Nov-2023 |
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
net: phy: add possible interfaces Add a possible_interfaces member to struct phy_device to indicate which interfaces a clause 45 PHY may switch between depending on the media. This must be populated by the PHY driver by the time the .config_init() method completes according to the PHYs host-side configuration. For example, the Marvell 88x3310 PHY can switch between 10GBASE-R, 5GBASE-R, 2500BASE-X, and SGMII on the host side depending on the media side speed, so all these interface modes are set in the possible_interfaces member. This allows phylib users (such as phylink) to know in advance which interface modes to expect, which allows them to appropriately restrict the advertised link modes according to the capabilities of other parts of the link. Tested-by: Luo Jie <quic_luoj@quicinc.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/E1r6VHk-00DDLN-I7@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
aadbd27f |
|
21-Nov-2023 |
Christian Marangi <ansuelsmth@gmail.com> |
net: phy: correctly check soft_reset ret ONLY if defined for PHY Introduced by commit 6e2d85ec0559 ("net: phy: Stop with excessive soft reset"). soft_reset call for phy_init_hw had multiple revision across the years and the implementation goes back to 2014. Originally was a simple call to write the generic PHY reset BIT, it was then moved to a dedicated function. It was then added the option for PHY driver to define their own special way to reset the PHY. Till this change, checking for ret was correct as it was always filled by either the generic reset or the custom implementation. This changed tho with commit 6e2d85ec0559 ("net: phy: Stop with excessive soft reset"), as the generic reset call to PHY was dropped but the ret check was never made entirely optional and dependent whether soft_reset was defined for the PHY driver or not. Luckly nothing was ever added before the soft_reset call so the ret check (in the case where a PHY didn't had soft_reset defined) although wrong, never caused problems as ret was init 0 at the start of phy_init_hw. To prevent any kind of problem and to make the function cleaner and more robust, correctly move the ret check if the soft_reset section making it optional and needed only with the function defined. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
289354f2 |
|
18-Nov-2023 |
Jakub Kicinski <kuba@kernel.org> |
net: partial revert of the "Make timestamping selectable: series Revert following commits: commit acec05fb78ab ("net_tstamp: Add TIMESTAMPING SOFTWARE and HARDWARE mask") commit 11d55be06df0 ("net: ethtool: Add a command to expose current time stamping layer") commit bb8645b00ced ("netlink: specs: Introduce new netlink command to get current timestamp") commit d905f9c75329 ("net: ethtool: Add a command to list available time stamping layers") commit aed5004ee7a0 ("netlink: specs: Introduce new netlink command to list available time stamping layers") commit 51bdf3165f01 ("net: Replace hwtstamp_source by timestamping layer") commit 0f7f463d4821 ("net: Change the API of PHY default timestamp to MAC") commit 091fab122869 ("net: ethtool: ts: Update GET_TS to reply the current selected timestamp") commit 152c75e1d002 ("net: ethtool: ts: Let the active time stamping layer be selectable") commit ee60ea6be0d3 ("netlink: specs: Introduce time stamping set command") They need more time for reviews. Link: https://lore.kernel.org/all/20231118183529.6e67100c@kernel.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
0f7f463d |
|
13-Nov-2023 |
Kory Maincent <kory.maincent@bootlin.com> |
net: Change the API of PHY default timestamp to MAC Change the API to select MAC default time stamping instead of the PHY. Indeed the PHY is closer to the wire therefore theoretically it has less delay than the MAC timestamping but the reality is different. Due to lower time stamping clock frequency, latency in the MDIO bus and no PHC hardware synchronization between different PHY, the PHY PTP is often less precise than the MAC. The exception is for PHY designed specially for PTP case but these devices are not very widespread. For not breaking the compatibility I introduce a default_timestamp flag in phy_device that is set by the phy driver to know we are using the old API behavior. The phy_set_timestamp function is called at each call of phy_attach_direct. In case of MAC driver using phylink this function is called when the interface is turned up. Then if the interface goes down and up again the last choice of timestamp will be overwritten by the default choice. A solution could be to cache the timestamp status but it can bring other issues. In case of SFP, if we change the module, it doesn't make sense to blindly re-set the timestamp back to PHY, if the new module has a PHY with mediocre timestamping capabilities. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b1dfc0f7 |
|
11-Dec-2023 |
Daniel Golle <daniel@makrotopia.org> |
net: phy: skip LED triggers on PHYs on SFP modules Calling led_trigger_register() when attaching a PHY located on an SFP module potentially (and practically) leads into a deadlock. Fix this by not calling led_trigger_register() for PHYs localted on SFP modules as such modules actually never got any LEDs. ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc4-next-20231208+ #0 Tainted: G O ------------------------------------------------------ kworker/u8:2/43 is trying to acquire lock: ffffffc08108c4e8 (triggers_list_lock){++++}-{3:3}, at: led_trigger_register+0x4c/0x1a8 but task is already holding lock: ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&sfp->sm_mutex){+.+.}-{3:3}: __mutex_lock+0x88/0x7a0 mutex_lock_nested+0x20/0x28 cleanup_module+0x2ae0/0x3120 [sfp] sfp_register_bus+0x5c/0x9c sfp_register_socket+0x48/0xd4 cleanup_module+0x271c/0x3120 [sfp] platform_probe+0x64/0xb8 really_probe+0x17c/0x3c0 __driver_probe_device+0x78/0x164 driver_probe_device+0x3c/0xd4 __driver_attach+0xec/0x1f0 bus_for_each_dev+0x60/0xa0 driver_attach+0x20/0x28 bus_add_driver+0x108/0x208 driver_register+0x5c/0x118 __platform_driver_register+0x24/0x2c init_module+0x28/0xa7c [sfp] do_one_initcall+0x70/0x2ec do_init_module+0x54/0x1e4 load_module+0x1b78/0x1c8c __do_sys_init_module+0x1bc/0x2cc __arm64_sys_init_module+0x18/0x20 invoke_syscall.constprop.0+0x4c/0xdc do_el0_svc+0x3c/0xbc el0_svc+0x34/0x80 el0t_64_sync_handler+0xf8/0x124 el0t_64_sync+0x150/0x154 -> #2 (rtnl_mutex){+.+.}-{3:3}: __mutex_lock+0x88/0x7a0 mutex_lock_nested+0x20/0x28 rtnl_lock+0x18/0x20 set_device_name+0x30/0x130 netdev_trig_activate+0x13c/0x1ac led_trigger_set+0x118/0x234 led_trigger_write+0x104/0x17c sysfs_kf_bin_write+0x64/0x80 kernfs_fop_write_iter+0x128/0x1b4 vfs_write+0x178/0x2a4 ksys_write+0x58/0xd4 __arm64_sys_write+0x18/0x20 invoke_syscall.constprop.0+0x4c/0xdc do_el0_svc+0x3c/0xbc el0_svc+0x34/0x80 el0t_64_sync_handler+0xf8/0x124 el0t_64_sync+0x150/0x154 -> #1 (&led_cdev->trigger_lock){++++}-{3:3}: down_write+0x4c/0x13c led_trigger_write+0xf8/0x17c sysfs_kf_bin_write+0x64/0x80 kernfs_fop_write_iter+0x128/0x1b4 vfs_write+0x178/0x2a4 ksys_write+0x58/0xd4 __arm64_sys_write+0x18/0x20 invoke_syscall.constprop.0+0x4c/0xdc do_el0_svc+0x3c/0xbc el0_svc+0x34/0x80 el0t_64_sync_handler+0xf8/0x124 el0t_64_sync+0x150/0x154 -> #0 (triggers_list_lock){++++}-{3:3}: __lock_acquire+0x12a0/0x2014 lock_acquire+0x100/0x2ac down_write+0x4c/0x13c led_trigger_register+0x4c/0x1a8 phy_led_triggers_register+0x9c/0x214 phy_attach_direct+0x154/0x36c phylink_attach_phy+0x30/0x60 phylink_sfp_connect_phy+0x140/0x510 sfp_add_phy+0x34/0x50 init_module+0x15c/0xa7c [sfp] cleanup_module+0x1d94/0x3120 [sfp] cleanup_module+0x2bb4/0x3120 [sfp] process_one_work+0x1f8/0x4ec worker_thread+0x1e8/0x3d8 kthread+0x104/0x110 ret_from_fork+0x10/0x20 other info that might help us debug this: Chain exists of: triggers_list_lock --> rtnl_mutex --> &sfp->sm_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sfp->sm_mutex); lock(rtnl_mutex); lock(&sfp->sm_mutex); lock(triggers_list_lock); *** DEADLOCK *** 4 locks held by kworker/u8:2/43: #0: ffffff80c000f938 ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec #1: ffffffc08214bde8 ((work_completion)(&(&sfp->timeout)->work)){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec #2: ffffffc0810902f8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x18/0x20 #3: ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp] stack backtrace: CPU: 0 PID: 43 Comm: kworker/u8:2 Tainted: G O 6.7.0-rc4-next-20231208+ #0 Hardware name: Bananapi BPI-R4 (DT) Workqueue: events_power_efficient cleanup_module [sfp] Call trace: dump_backtrace+0xa8/0x10c show_stack+0x14/0x1c dump_stack_lvl+0x5c/0xa0 dump_stack+0x14/0x1c print_circular_bug+0x328/0x430 check_noncircular+0x124/0x134 __lock_acquire+0x12a0/0x2014 lock_acquire+0x100/0x2ac down_write+0x4c/0x13c led_trigger_register+0x4c/0x1a8 phy_led_triggers_register+0x9c/0x214 phy_attach_direct+0x154/0x36c phylink_attach_phy+0x30/0x60 phylink_sfp_connect_phy+0x140/0x510 sfp_add_phy+0x34/0x50 init_module+0x15c/0xa7c [sfp] cleanup_module+0x1d94/0x3120 [sfp] cleanup_module+0x2bb4/0x3120 [sfp] process_one_work+0x1f8/0x4ec worker_thread+0x1e8/0x3d8 kthread+0x104/0x110 ret_from_fork+0x10/0x20 Signed-off-by: Daniel Golle <daniel@makrotopia.org> Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs") Link: https://lore.kernel.org/r/102a9dce38bdf00215735d04cd4704458273ad9c.1702339354.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
1dcc03c9 |
|
08-Aug-2023 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: phy_device: Call into the PHY driver to set LED offload Linux LEDs can be requested to perform hardware accelerated blinking to indicate link, RX, TX etc. Pass the rules for blinking to the PHY driver, if it implements the ops needed to determine if a given pattern can be offloaded, to offload it, and what the current offload is. Additionally implement the op needed to get what device the LED is for. Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/20230808210436.838995-3-andrew@lunn.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
f4bf4678 |
|
03-Aug-2023 |
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
net: phy: move marking PHY on SFP module into SFP code Move marking the PHY as being on a SFP module into the SFP code between getting the PHY device (and thus initialising the phy_device structure) and registering the discovered device. This means that PHY drivers can use phy_on_sfp() in their match and get_features methods. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1qRaga-001vKt-8X@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
60495b66 |
|
01-Aug-2023 |
Vladimir Oltean <vladimir.oltean@nxp.com> |
net: phy: provide phylib stubs for hardware timestamping operations net/core/dev_ioctl.c (built-in code) will want to call phy_mii_ioctl() for hardware timestamping purposes. This is not directly possible, because phy_mii_ioctl() is a symbol provided under CONFIG_PHYLIB. Do something similar to what was done in DSA in commit 5a17818682cf ("net: dsa: replace NETDEV_PRE_CHANGE_HWTSTAMP notifier with a stub"), and arrange some indirect calls to phy_mii_ioctl() through a stub structure containing function pointers, that's provided by phylib as built-in even when CONFIG_PHYLIB=m, and which phy_init() populates at runtime (module insertion). Note: maybe the ownership of the ethtool_phy_ops singleton is backwards, and the methods exposed by that should be later merged into phylib_stubs. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230801142824.1772134-12-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
70ef7d87 |
|
01-Aug-2023 |
Vladimir Oltean <vladimir.oltean@nxp.com> |
net: transfer rtnl_lock() requirement from ethtool_set_ethtool_phy_ops() to caller phy_init() and phy_exit() will have to do more stuff under rtnl_lock() in a future change. Since rtnl_unlock() -> netdev_run_todo() does a lot of stuff under the hood, it's a pity to lock and unlock the rtnetlink mutex twice in a row. Change the calling convention such that the only caller of ethtool_set_ethtool_phy_ops(), phy_device.c, provides a context where the rtnl_mutex is already acquired. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230801142824.1772134-11-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
cc941e54 |
|
11-Aug-2023 |
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
net: phy: fix IRQ-based wake-on-lan over hibernate / power off Uwe reports: "Most PHYs signal WoL using an interrupt. So disabling interrupts [at shutdown] breaks WoL at least on PHYs covered by the marvell driver." Discussing with Ioana, the problem which was trying to be solved was: "The board in question is a LS1021ATSN which has two AR8031 PHYs that share an interrupt line. In case only one of the PHYs is probed and there are pending interrupts on the PHY#2 an IRQ storm will happen since there is no entity to clear the interrupt from PHY#2's registers. PHY#1's driver will get stuck in .handle_interrupt() indefinitely." Further confirmation that "the two AR8031 PHYs are on the same MDIO bus." With WoL using interrupts to wake the system, in such a case, the system will begin booting with an asserted interrupt. Thus, we need to cope with an interrupt asserted during boot. Solve this instead by disabling interrupts during PHY probe. This will ensure in Ioana's situation that both PHYs of the same type sharing an interrupt line on a common MDIO bus will have their interrupt outputs disabled when the driver probes the device, but before we hook in any interrupt handlers - thus avoiding the interrupt storm. A better fix would be for platform firmware to disable the interrupting devices at source during boot, before control is handed to the kernel. Fixes: e2f016cf7751 ("net: phy: add a shutdown procedure") Link: 20230804071757.383971-1-u.kleine-koenig@pengutronix.de Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1c613bea |
|
19-Jul-2023 |
Vladimir Oltean <vladimir.oltean@nxp.com> |
net: phy: prevent stale pointer dereference in phy_init() mdio_bus_init() and phy_driver_register() both have error paths, and if those are ever hit, ethtool will have a stale pointer to the phy_ethtool_phy_ops stub structure, which references memory from a module that failed to load (phylib). It is probably hard to force an error in this code path even manually, but the error teardown path of phy_init() should be the same as phy_exit(), which is now simply not the case. Fixes: 55d8f053ce1b ("net: phy: Register ethtool PHY operations") Link: https://lore.kernel.org/netdev/ZLaiJ4G6TaJYGJyU@shell.armlinux.org.uk/ Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230720000231.1939689-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
c938ab4d |
|
17-Jun-2023 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: Manual remove LEDs to ensure correct ordering If the core is left to remove the LEDs via devm_, it is performed too late, after the PHY driver is removed from the PHY. This results in dereferencing a NULL pointer when the LED core tries to turn the LED off before destroying the LED. Manually unregister the LEDs at a safe point in phy_remove. Cc: stable@vger.kernel.org Reported-by: Florian Fainelli <f.fainelli@gmail.com> Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4b159f50 |
|
19-May-2023 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: add helpers for comparing phy IDs There are several places which open code comparing PHY IDs. Provide a couple of helpers to assist with this, using a slightly simpler test than the original: - phy_id_compare() compares two arbitary PHY IDs and a mask of the significant bits in the ID. - phydev_id_compare() compares the bound phydev with the specified PHY ID, using the bound driver's mask. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a7e34480 |
|
11-May-2023 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: Allow drivers to always call into ->suspend() A few PHY drivers are currently attempting to not suspend the PHY when Wake-on-LAN is enabled, however that code is not currently executing at all due to an early check in phy_suspend(). This prevents PHY drivers from making an appropriate decisions and put the hardware into a low power state if desired. In order to allow the PHY drivers to opt into getting their ->suspend routine to be called, add a PHY_ALWAYS_CALL_SUSPEND bit which can be set. A boolean that tracks whether the PHY or the attached MAC has Wake-on-LAN enabled is also provided for convenience. If phydev::wol_enabled then the PHY shall not prevent its own Wake-on-LAN detection logic from working and shall not prevent the Ethernet MAC from receiving packets for matching. Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
aed8fdad |
|
24-Apr-2023 |
Alexander Stein <alexander.stein@ew.tq-group.com> |
net: phy: Fix reading LED reg property 'reg' is always encoded in 32 bits, thus it has to be read using the function with the corresponding bit width. Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230424141648.317944-1-alexander.stein@ew.tq-group.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
4bb7aac7 |
|
20-Apr-2023 |
Arnd Bergmann <arnd@arndb.de> |
net: phy: fix circular LEDS_CLASS dependencies The CONFIG_PHYLIB symbol is selected by a number of device drivers that need PHY support, but it now has a dependency on CONFIG_LEDS_CLASS, which may not be enabled, causing build failures. Avoid the risk of missing and circular dependencies by guarding the phylib LED support itself in another Kconfig symbol that can only be enabled if the dependency is met. This could be made a hidden symbol and always enabled when both CONFIG_OF and CONFIG_LEDS_CLASS are reachable from the phylib, but there may be an advantage in having users see this option when they have a misconfigured kernel without built-in LED support. Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230420084624.3005701-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
4e901018 |
|
17-Apr-2023 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: phy_device: Call into the PHY driver to set LED blinking Linux LEDs can be requested to perform hardware accelerated blinking. Pass this to the PHY driver, if it implements the op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
68481818 |
|
17-Apr-2023 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: phy_device: Call into the PHY driver to set LED brightness Linux LEDs can be software controlled via the brightness file in /sys. LED drivers need to implement a brightness_set function which the core will call. Implement an intermediary in phy_device, which will call into the phy driver if it implements the necessary function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
01e5b728 |
|
17-Apr-2023 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: Add a binding for PHY LEDs Define common binding parsing for all PHY drivers with LEDs using phylib. Parse the DT as part of the phy_probe and add LEDs to the linux LED class infrastructure. For the moment, provide a dummy brightness function, which will later be replaced with a call into the PHY driver. This allows testing since the LED core might otherwise reject an LED whose brightness cannot be set. Add a dependency on LED_CLASS. It either needs to be built in, or not enabled, since a modular build can result in linker errors. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
83456576 |
|
14-Mar-2023 |
Wolfram Sang <wsa+renesas@sang-engineering.com> |
net: phy: update obsolete comment about PHY_STARTING Commit 899a3cbbf77a ("net: phy: remove states PHY_STARTING and PHY_PENDING") missed to update a comment in phy_probe. Remove superfluous "Description:" prefix while we are here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20230314124856.44878-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
4a0faa02 |
|
24-Mar-2023 |
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
net: phy: constify fwnode_get_phy_node() fwnode argument fwnode_get_phy_node() does not motify the fwnode structure, so make the argument const, Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f4b47a2e |
|
03-Mar-2023 |
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
net: phylib: get rid of unnecessary locking The locking in phy_probe() and phy_remove() does very little to prevent any races with e.g. phy_attach_direct(), but instead causes lockdep ABBA warnings. Remove it. ====================================================== WARNING: possible circular locking dependency detected 6.2.0-dirty #1108 Tainted: G W E ------------------------------------------------------ ip/415 is trying to acquire lock: ffff5c268f81ef50 (&dev->lock){+.+.}-{3:3}, at: phy_attach_direct+0x17c/0x3a0 [libphy] but task is already holding lock: ffffaef6496cb518 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x154/0x560 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}-{3:3}: __lock_acquire+0x35c/0x6c0 lock_acquire.part.0+0xcc/0x220 lock_acquire+0x68/0x84 __mutex_lock+0x8c/0x414 mutex_lock_nested+0x34/0x40 rtnl_lock+0x24/0x30 sfp_bus_add_upstream+0x34/0x150 phy_sfp_probe+0x4c/0x94 [libphy] mv3310_probe+0x148/0x184 [marvell10g] phy_probe+0x8c/0x200 [libphy] call_driver_probe+0xbc/0x15c really_probe+0xc0/0x320 __driver_probe_device+0x84/0x120 driver_probe_device+0x44/0x120 __device_attach_driver+0xc4/0x160 bus_for_each_drv+0x80/0xe0 __device_attach+0xb0/0x1f0 device_initial_probe+0x1c/0x2c bus_probe_device+0xa4/0xb0 device_add+0x360/0x53c phy_device_register+0x60/0xa4 [libphy] fwnode_mdiobus_phy_device_register+0xc0/0x190 [fwnode_mdio] fwnode_mdiobus_register_phy+0x160/0xd80 [fwnode_mdio] of_mdiobus_register+0x140/0x340 [of_mdio] orion_mdio_probe+0x298/0x3c0 [mvmdio] platform_probe+0x70/0xe0 call_driver_probe+0x34/0x15c really_probe+0xc0/0x320 __driver_probe_device+0x84/0x120 driver_probe_device+0x44/0x120 __driver_attach+0x104/0x210 bus_for_each_dev+0x78/0xdc driver_attach+0x2c/0x3c bus_add_driver+0x184/0x240 driver_register+0x80/0x13c __platform_driver_register+0x30/0x3c xt_compat_calc_jump+0x28/0xa4 [x_tables] do_one_initcall+0x50/0x1b0 do_init_module+0x50/0x1fc load_module+0x684/0x744 __do_sys_finit_module+0xc4/0x140 __arm64_sys_finit_module+0x28/0x34 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x6c/0x1b0 do_el0_svc+0x34/0x44 el0_svc+0x48/0xf0 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x1a0/0x1a4 -> #0 (&dev->lock){+.+.}-{3:3}: check_prev_add+0xb4/0xc80 validate_chain+0x414/0x47c __lock_acquire+0x35c/0x6c0 lock_acquire.part.0+0xcc/0x220 lock_acquire+0x68/0x84 __mutex_lock+0x8c/0x414 mutex_lock_nested+0x34/0x40 phy_attach_direct+0x17c/0x3a0 [libphy] phylink_fwnode_phy_connect.part.0+0x70/0xe4 [phylink] phylink_fwnode_phy_connect+0x48/0x60 [phylink] mvpp2_open+0xec/0x2e0 [mvpp2] __dev_open+0x104/0x214 __dev_change_flags+0x1d4/0x254 dev_change_flags+0x2c/0x7c do_setlink+0x254/0xa50 __rtnl_newlink+0x430/0x514 rtnl_newlink+0x58/0x8c rtnetlink_rcv_msg+0x17c/0x560 netlink_rcv_skb+0x64/0x150 rtnetlink_rcv+0x20/0x30 netlink_unicast+0x1d4/0x2b4 netlink_sendmsg+0x1a4/0x400 ____sys_sendmsg+0x228/0x290 ___sys_sendmsg+0x88/0xec __sys_sendmsg+0x70/0xd0 __arm64_sys_sendmsg+0x2c/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x6c/0x1b0 do_el0_svc+0x34/0x44 el0_svc+0x48/0xf0 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x1a0/0x1a4 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(&dev->lock); lock(rtnl_mutex); lock(&dev->lock); *** DEADLOCK *** Fixes: 298e54fa810e ("net: phy: add core phylib sfp support") Reported-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8f9850dd |
|
27-Feb-2023 |
Dan Carpenter <error27@gmail.com> |
net: phy: unlock on error in phy_probe() If genphy_c45_read_eee_adv() fails then we need to do a reset and unlock the &phydev->lock mutex before returning. Fixes: 3eeca4e199ce ("net: phy: do not force EEE support") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/Y/x/6kHCjnQHqOpF@kili Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
#
3eeca4e1 |
|
21-Feb-2023 |
Oleksij Rempel <linux@rempel-privat.de> |
net: phy: do not force EEE support With following patches: commit 9b01c885be36 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()") commit 5827b168125d ("net: phy: c45: migrate to genphy_c45_write_eee_adv()") we set the advertisement to potentially supported values. This behavior may introduce new regressions on systems where EEE was disabled by default (BIOS or boot loader configuration or by other ways.) At same time, with this patches, we would overwrite EEE advertisement configuration made over ethtool. To avoid this issues, we need to cache initial and ethtool advertisement configuration and store it for later use. Fixes: 9b01c885be36 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()") Fixes: 5827b168125d ("net: phy: c45: migrate to genphy_c45_write_eee_adv()") Fixes: 022c3f87f88e ("net: phy: add genphy_c45_ethtool_get/set_eee() support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
#
b6478b8c |
|
21-Feb-2023 |
Oleksij Rempel <linux@rempel-privat.de> |
net: phy: c45: add genphy_c45_an_config_eee_aneg() function Add new genphy_c45_an_config_eee_aneg() function and replace some of genphy_c45_write_eee_adv() calls. This will be needed by the next patch. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
#
c2a978c1 |
|
16-Feb-2023 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: Read EEE abilities when using .features A PHY driver can use a static integer value to indicate what link mode features it supports, i.e, its abilities.. This is the old way, but useful when dynamically determining the devices features does not work, e.g. support of fibre. EEE support has been moved into phydev->supported_eee. This needs to be set otherwise the code assumes EEE is not supported. It is normally set as part of reading the devices abilities. However if a static integer value was used, the dynamic reading of the abilities is not performed. Add a call to genphy_c45_read_eee_abilities() to read the EEE abilities. Fixes: 8b68710a3121 ("net: phy: start using genphy_c45_ethtool_get/set_eee()") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9b01c885 |
|
11-Feb-2023 |
Oleksij Rempel <linux@rempel-privat.de> |
net: phy: c22: migrate to genphy_c45_write_eee_adv() Migrate from genphy_config_eee_advert() to genphy_c45_write_eee_adv(). It should work as before except write operation to the EEE adv registers will be done only if some EEE abilities was detected. If some driver will have a regression, related driver should provide own .get_features callback. See micrel.c:ksz9477_get_features() as example. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
14e47d1f |
|
11-Feb-2023 |
Oleksij Rempel <linux@rempel-privat.de> |
net: phy: add genphy_c45_read_eee_abilities() function Add generic function for EEE abilities defined by IEEE 802.3 specification. For now following registers are supported: - IEEE 802.3-2018 45.2.3.10 EEE control and capability 1 (Register 3.20) - IEEE 802.3cg-2019 45.2.1.186b 10BASE-T1L PMA status register (Register 1.2295) Since I was not able to find any flag signaling support of these registers, we should detect link mode abilities first and then based on these abilities doing EEE link modes detection. Results of EEE ability detection will be stored into new variable phydev->supported_eee. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fbfe9759 |
|
18-Jan-2023 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: Decide on C45 capabilities based on presence of method Some PHYs provide invalid IDs in C22 space. If C45 is supported on the bus an attempt can be made to get the IDs from the C45 space. Decide on this based on the presence of the C45 read method in the bus structure. This will allow the unreliable probe_capabilities to be removed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
#
a23a1e57 |
|
09-Jan-2023 |
Piergiorgio Beruto <piergiorgio.beruto@gmail.com> |
drivers/net/phy: add connection between ethtool and phylib for PLCA This patch adds the required connection between netlink ethtool and phylib to resolve PLCA get/set config and get status messages. Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
16178c8e |
|
09-Jan-2023 |
Piergiorgio Beruto <piergiorgio.beruto@gmail.com> |
drivers/net/phy: add the link modes for the 10BASE-T1S Ethernet PHY This patch adds the link modes for the IEEE 802.3cg Clause 147 10BASE-T1S Ethernet PHY. According to the specifications, the 10BASE-T1S supports Point-To-Point Full-Duplex, Point-To-Point Half-Duplex and/or Point-To-Multipoint (AKA Multi-Drop) Half-Duplex operations. Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7d885863 |
|
09-Jan-2023 |
Michael Walle <michael@walle.cc> |
net: phy: allow a phy to opt-out of interrupt handling Until now, it is not possible for a PHY driver to disable interrupts during runtime. If a driver offers the .config_intr() as well as the .handle_interrupt() ops, it is eligible for interrupt handling. Introduce a new flag for the dev_flags property of struct phy_device, which can be set by PHY driver to skip interrupt setup and fall back to polling mode. At the moment, this is used for the MaxLinear PHY which has broken interrupt handling and there is a need to disable interrupts in some cases. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
#
73a87602 |
|
27-Jan-2023 |
Colin Foster <colin.foster@in-advantage.com> |
net: phy: fix null dereference in phy_attach_direct Commit bc66fa87d4fd ("net: phy: Add link between phy dev and mac dev") introduced a link between net devices and phy devices. It fails to check whether dev is NULL, leading to a NULL dereference error. Fixes: bc66fa87d4fd ("net: phy: Add link between phy dev and mac dev") Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
bc66fa87 |
|
29-Nov-2022 |
Xiaolei Wang <xiaolei.wang@windriver.com> |
net: phy: Add link between phy dev and mac dev If the external phy used by current mac interface is managed by another mac interface, it means that this network port cannot work independently, especially when the system suspends and resumes, the following trace may appear, so we should create a device link between phy dev and mac dev. WARNING: CPU: 0 PID: 24 at drivers/net/phy/phy.c:983 phy_error+0x20/0x68 Modules linked in: CPU: 0 PID: 24 Comm: kworker/0:2 Not tainted 6.1.0-rc3-00011-g5aaef24b5c6d-dirty #34 Hardware name: Freescale i.MX6 SoloX (Device Tree) Workqueue: events_power_efficient phy_state_machine unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x68/0x90 dump_stack_lvl from __warn+0xb4/0x24c __warn from warn_slowpath_fmt+0x5c/0xd8 warn_slowpath_fmt from phy_error+0x20/0x68 phy_error from phy_state_machine+0x22c/0x23c phy_state_machine from process_one_work+0x288/0x744 process_one_work from worker_thread+0x3c/0x500 worker_thread from kthread+0xf0/0x114 kthread from ret_from_fork+0x14/0x28 Exception stack(0xf0951fb0 to 0xf0951ff8) Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221130021216.1052230-1-xiaolei.wang@windriver.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
cdde1560 |
|
24-Nov-2022 |
Yang Yingliang <yangyingliang@huawei.com> |
net: mdiobus: fix unbalanced node reference count I got the following report while doing device(mscc-miim) load test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /spi/soc@0/mdio@7107009c/ethernet-phy@0 If the 'fwnode' is not an acpi node, the refcount is get in fwnode_mdiobus_phy_device_register(), but it has never been put when the device is freed in the normal path. So call fwnode_handle_put() in phy_device_release() to avoid leak. If it's an acpi node, it has never been get, but it's put in the error path, so call fwnode_handle_get() before phy_device_register() to keep get/put operation balanced. Fixes: bc1bee3b87ee ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221124150130.609420-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
369eb2c9 |
|
23-Nov-2022 |
Yang Yingliang <yangyingliang@huawei.com> |
net: phy: fix null-ptr-deref while probe() failed I got a null-ptr-deref report as following when doing fault injection test: BUG: kernel NULL pointer dereference, address: 0000000000000058 Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 253 Comm: 507-spi-dm9051 Tainted: G B N 6.1.0-rc3+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:klist_put+0x2d/0xd0 Call Trace: <TASK> klist_remove+0xf1/0x1c0 device_release_driver_internal+0x23e/0x2d0 bus_remove_device+0x1bd/0x240 device_del+0x357/0x770 phy_device_remove+0x11/0x30 mdiobus_unregister+0xa5/0x140 release_nodes+0x6a/0xa0 devres_release_all+0xf8/0x150 device_unbind_cleanup+0x19/0xd0 //probe path: phy_device_register() device_add() phy_connect phy_attach_direct() //set device driver probe() //it's failed, driver is not bound device_bind_driver() // probe failed, it's not called //remove path: phy_device_remove() device_del() device_release_driver_internal() __device_release_driver() //dev->drv is not NULL klist_remove() <- knode_driver is not added yet, cause null-ptr-deref In phy_attach_direct(), after setting the 'dev->driver', probe() fails, device_bind_driver() is not called, so the knode_driver->n_klist is not set, then it causes null-ptr-deref in __device_release_driver() while deleting device. Fix this by setting dev->driver to NULL in the error path in phy_attach_direct(). Fixes: e13934563db0 ("[PATCH] PHY Layer fixup") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5e82147d |
|
03-Oct-2022 |
Oleksij Rempel <linux@rempel-privat.de> |
net: mdiobus: search for PSE nodes by parsing PHY nodes. Some PHYs can be linked with PSE (Power Sourcing Equipment), so search for related nodes and attach it to the phydev. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
b5155ddd |
|
28-Sep-2022 |
Wang Yufen <wangyufen@huawei.com> |
net: phy: Convert to use sysfs_emit() APIs Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: Wang Yufen <wangyufen@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/1664364860-29153-1-git-send-email-wangyufen@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
fb3ceec1 |
|
30-Aug-2022 |
Wolfram Sang <wsa+renesas@sang-engineering.com> |
net: move from strlcpy with unused retval to strscpy Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220830201457.7984-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
ea64cdfa |
|
22-Sep-2022 |
Lukas Wunner <lukas@wunner.de> |
net: phy: Don't WARN for PHY_UP state in mdio_bus_phy_resume() Commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") introduced a WARN() on resume from system sleep if a PHY is not in PHY_HALTED state. Commit 6dbe852c379f ("net: phy: Don't WARN for PHY_READY state in mdio_bus_phy_resume()") added an exemption for PHY_READY state from the WARN(). It turns out PHY_UP state needs to be exempted as well because the following may happen on suspend: mdio_bus_phy_suspend() phy_stop_machine() phydev->state = PHY_UP # if (phydev->state >= PHY_UP) Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/netdev/2b1a1588-505e-dff3-301d-bfc1fb14d685@samsung.com/ Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Xiaolei Wang <xiaolei.wang@windriver.com> Link: https://lore.kernel.org/r/8128fdb51eeebc9efbf3776a4097363a1317aaf1.1663905575.git.lukas@wunner.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
#
6dbe852c |
|
19-Aug-2022 |
Xiaolei Wang <xiaolei.wang@windriver.com> |
net: phy: Don't WARN for PHY_READY state in mdio_bus_phy_resume() For some MAC drivers, they set the mac_managed_pm to true in its ->ndo_open() callback. So before the mac_managed_pm is set to true, we still want to leverage the mdio_bus_phy_suspend()/resume() for the phy device suspend and resume. In this case, the phy device is in PHY_READY, and we shouldn't warn about this. It also seems that the check of mac_managed_pm in WARN_ON is redundant since we already check this in the entry of mdio_bus_phy_resume(), so drop it. Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220819082451.1992102-1-xiaolei.wang@windriver.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
744d23c7 |
|
01-Aug-2022 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: Warn about incorrect mdio_bus_phy_resume() state Calling mdio_bus_phy_resume() with neither the PHY state machine set to PHY_HALTED nor phydev->mac_managed_pm set to true is a good indication that we can produce a race condition looking like this: CPU0 CPU1 bcmgenet_resume -> phy_resume -> phy_init_hw -> phy_start -> phy_resume phy_start_aneg() mdio_bus_phy_resume -> phy_resume -> phy_write(..., BMCR_RESET) -> usleep() -> phy_read() with the phy_resume() function triggering a PHY behavior that might have to be worked around with (see bf8bfc4336f7 ("net: phy: broadcom: Fix brcm_fet_config_init()") for instance) that ultimately leads to an error reading from the PHY. Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220801233403.258871-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
f28a602b |
|
18-Jun-2022 |
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
net: phy: use mii_bmcr_encode_fixed() phylib can make use of the newly introduced mii_bmcr_encode_fixed() macro, so let's convert it over. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1758bde2 |
|
27-Jun-2022 |
Lukas Wunner <lukas@wunner.de> |
net: phy: Don't trigger state machine while in suspend Upon system sleep, mdio_bus_phy_suspend() stops the phy_state_machine(), but subsequent interrupts may retrigger it: They may have been left enabled to facilitate wakeup and are not quiesced until the ->suspend_noirq() phase. Unwanted interrupts may hence occur between mdio_bus_phy_suspend() and dpm_suspend_noirq(), as well as between dpm_resume_noirq() and mdio_bus_phy_resume(). Retriggering the phy_state_machine() through an interrupt is not only undesirable for the reason given in mdio_bus_phy_suspend() (freezing it midway with phydev->lock held), but also because the PHY may be inaccessible after it's suspended: Accesses to USB-attached PHYs are blocked once usb_suspend_both() clears the can_submit flag and PHYs on PCI network cards may become inaccessible upon suspend as well. Amend phy_interrupt() to avoid triggering the state machine if the PHY is suspended. Signal wakeup instead if the attached net_device or its parent has been configured as a wakeup source. (Those conditions are identical to mdio_bus_phy_may_suspend().) Postpone handling of the interrupt until the PHY has resumed. Before stopping the phy_state_machine() in mdio_bus_phy_suspend(), wait for a concurrent phy_interrupt() to run to completion. That is necessary because phy_interrupt() may have checked the PHY's suspend status before the system sleep transition commenced and it may thus retrigger the state machine after it was stopped. Likewise, after re-enabling interrupt handling in mdio_bus_phy_resume(), wait for a concurrent phy_interrupt() to complete to ensure that interrupts which it postponed are properly rerun. The issue was exposed by commit 1ce8b37241ed ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling"), but has existed since forever. Fixes: 541cd3ee00a4 ("phylib: Fix deadlock on resume") Link: https://lore.kernel.org/netdev/a5315a8a-32c2-962f-f696-de9a26d30091@samsung.com/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable@vger.kernel.org # v2.6.33+ Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/b7f386d04e9b5b0e2738f0125743e30676f309ef.1656410895.git.lukas@wunner.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
3da8ffd8 |
|
29-Apr-2022 |
Alexandru Tachici <alexandru.tachici@analog.com> |
net: phy: Add 10BASE-T1L support in phy-c45 This patch is needed because the BASE-T1 uses different registers for status, control and advertisement to those already employed in the existing phy-c45 functions. Where required, genphy_c45 functions will now check whether the device supports BASE-T1 and use the specific registers instead: 45.2.7.19 BASE-T1 AN control register, 45.2.7.20 BASE-T1 AN status, 45.2.7.21 BASE-T1 AN advertisement register, 45.2.7.22 BASE-T1 AN LP Base Page ability register, 45.2.1.185 BASE-T1 PMA/PMD control register. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3254e0b9 |
|
29-Apr-2022 |
Alexandru Tachici <alexandru.tachici@analog.com> |
ethtool: Add 10base-T1L link mode entry Add entry for the 10base-T1L full duplex mode. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
07caad0b |
|
27-Apr-2022 |
Lukas Wunner <lukas@wunner.de> |
net: phy: Deduplicate interrupt disablement on PHY attach phy_attach_direct() first calls phy_init_hw() (which restores interrupt settings through ->config_intr()), then calls phy_disable_interrupts(). So if phydev->interrupts was previously set to 1, interrupts are briefly enabled, then disabled, which seems nonsensical. If it was previously set to 0, interrupts are disabled twice, which is equally nonsensical. Deduplicate interrupt disablement. Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/805ccdc606bd8898d59931bd4c7c68537ed6e550.1651040826.git.lukas@wunner.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
64807c23 |
|
07-Mar-2022 |
Arun Ramadoss <arun.ramadoss@microchip.com> |
net: phy: exported the genphy_read_master_slave function genphy_read_master_slave function allows to configure the master/slave for gigabit phys only. In order to use this function irrespective of speed, moved the speed check to the genphy_read_status call. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
#
cbda1b16 |
|
19-Jan-2022 |
Marek Behún <kabel@kernel.org> |
phylib: fix potential use-after-free Commit bafbdd527d56 ("phylib: Add device reset GPIO support") added call to phy_device_reset(phydev) after the put_device() call in phy_detach(). The comment before the put_device() call says that the phydev might go away with put_device(). Fix potential use-after-free by calling phy_device_reset() before put_device(). Fixes: bafbdd527d56 ("phylib: Add device reset GPIO support") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220119162748.32418-1-kabel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
2b12d51c |
|
07-Oct-2021 |
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
net: phylib: ensure phy device drivers do not match by DT PHYLIB device drivers must match by either numerical PHY ID or by their .match_phy_device method. Matching by DT is not permitted. Link: https://lore.kernel.org/r/2b1dc053-8c9a-e3e4-b450-eecdfca3fe16@gmail.com Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f4982393 |
|
08-Oct-2021 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: Do not shutdown PHYs in READY state In case a PHY device was probed thus in the PHY_READY state, but not configured and with no network device attached yet, we should not be trying to shut it down because it has been brought back into reset by phy_device_reset() towards the end of phy_probe() and anyway we have not configured the PHY yet. Fixes: e2f016cf7751 ("net: phy: add a shutdown procedure") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
301de697 |
|
14-Sep-2021 |
Vladimir Oltean <vladimir.oltean@nxp.com> |
Revert "net: phy: Uniform PHY driver access" This reverts commit 3ac8eed62596387214869319379c1fcba264d8c6, which did more than it said on the box, and not only it replaced to_phy_driver with phydev->drv, but it also removed the "!drv" check, without actually explaining why that is fine. That patch in fact breaks suspend/resume on any system which has PHY devices with no drivers bound. The stack trace is: Unable to handle kernel NULL pointer dereference at virtual address 00000000000000e8 pc : mdio_bus_phy_suspend+0xd8/0xec lr : dpm_run_callback+0x38/0x90 Call trace: mdio_bus_phy_suspend+0xd8/0xec dpm_run_callback+0x38/0x90 __device_suspend+0x108/0x3cc dpm_suspend+0x140/0x210 dpm_suspend_start+0x7c/0xa0 suspend_devices_and_enter+0x13c/0x540 pm_suspend+0x2a4/0x330 Examples why that assumption is not fine: - There is an MDIO bus with a PHY device that doesn't have a specific PHY driver loaded, because mdiobus_register() automatically creates a PHY device for it but there is no specific PHY driver in the system. Normally under those circumstances, the generic PHY driver will be bound lazily to it (at phy_attach_direct time). But some Ethernet drivers attach to their PHY at .ndo_open time. Until then it, the to-be-driven-by-genphy PHY device will not have a driver. The blamed patch amounts to saying "you need to open all net devices before the system can suspend, to avoid the NULL pointer dereference". - There is any raw MDIO device which has 'plausible' values in the PHY ID registers 2 and 3, which is located on an MDIO bus whose driver does not set bus->phy_mask = ~0 (which prevents auto-scanning of PHY devices). An example could be a MAC's internal MDIO bus with PCS devices on it, for serial links such as SGMII. PHY devices will get created for those PCSes too, due to that MDIO bus auto-scanning, and although those PHY devices are not used, they do not bother anybody either. PCS devices are usually managed in Linux as raw MDIO devices. Nonetheless, they do not have a PHY driver, nor does anybody attempt to connect to them (because they are not a PHY), and therefore this patch breaks that. The goal itself of the patch is questionable, so I am going for a straight revert. to_phy_driver does not seem to have a need to be replaced by phydev->drv, in fact that might even trigger code paths which were not given too deep of a thought. For instance: phy_probe populates phydev->drv at the beginning, but does not clean it up on any error (including EPROBE_DEFER). So if the phydev driver requests probe deferral, phydev->drv will remain populated despite there being no driver bound. If a system suspend starts in between the initial probe deferral request and the subsequent probe retry, we will be calling the phydev->drv->suspend method, but _before_ any phydev->drv->probe call has succeeded. That is to say, if the phydev->drv is allocating any driver-private data structure in ->probe, it pretty much expects that data structure to be available in ->suspend. But it may not. That is a pretty insane environment to present to PHY drivers. In the code structure before the blamed patch, mdio_bus_phy_may_suspend would just say "no, don't suspend" to any PHY device which does not have a driver pointer _in_the_device_structure_ (not the phydev->drv). That would essentially ensure that ->suspend will never get called for a device that has not yet successfully completed probe. This is the code structure the patch is returning to, via the revert. Fixes: 3ac8eed62596 ("net: phy: Uniform PHY driver access") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210914140515.2311548-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
3ac8eed6 |
|
19-Aug-2021 |
Gerhard Engleder <gerhard@engleder-embedded.com> |
net: phy: Uniform PHY driver access struct phy_device contains a pointer to the PHY driver and nearly everywhere this pointer is used to access the PHY driver. Only mdio_bus_phy_may_suspend() is still using to_phy_driver() instead of the PHY driver pointer. Uniform PHY driver access by eliminating to_phy_driver() use in mdio_bus_phy_may_suspend(). Only phy_bus_match() and phy_probe() are still using to_phy_driver(), because PHY driver pointer is not available there. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4ed311b0 |
|
19-Aug-2021 |
Gerhard Engleder <gerhard@engleder-embedded.com> |
net: phy: Support set_loopback override phy_read_status and various other PHY functions support PHY specific overriding of driver functions by using a PHY specific pointer to the PHY driver. Add support of PHY specific override to phy_loopback too. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8b72b301 |
|
18-Jul-2021 |
Xu Liang <lxu@maxlinear.com> |
net: phy: add API to read 802.3-c45 IDs Add API to read 802.3-c45 IDs so that C22/C45 mixed device can use C45 APIs without failing ID checks. Signed-off-by: Xu Liang <lxu@maxlinear.com> Acked-by: Hauke Mehrtens <hmehrtens@maxlinear.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
169d7a40 |
|
16-Jun-2021 |
Wenpeng Liang <liangwenpeng@huawei.com> |
net: phy: fix formatting issues with braces Fix following format issues: 1. open brace '{' following function definitions should go to the next line. 2. braces {} are not necessary for single line statements. 3. else should follow close brace '}'. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b9926da0 |
|
11-Jun-2021 |
Calvin Johnson <calvin.johnson@oss.nxp.com> |
net: mii_timestamper: check NULL in unregister_mii_timestamper() Callers of unregister_mii_timestamper() currently check for NULL value of mii_ts before calling it. Place the NULL check inside unregister_mii_timestamper() and update the callers accordingly. Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Grant Likely <grant.likely@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
114dea60 |
|
11-Jun-2021 |
Calvin Johnson <calvin.johnson@oss.nxp.com> |
net: phy: Introduce fwnode_get_phy_id() Extract phy_id from compatible string. This will be used by fwnode_mdiobus_register_phy() to create phy device using the phy_id. Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Grant Likely <grant.likely@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
425775ed |
|
11-Jun-2021 |
Calvin Johnson <calvin.johnson@oss.nxp.com> |
net: phy: Introduce phy related fwnode functions Define fwnode_phy_find_device() to iterate an mdiobus and find the phy device of the provided phy fwnode. Additionally define device_phy_find_device() to find phy device of provided device. Define fwnode_get_phy_node() to get phy_node using named reference. Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Grant Likely <grant.likely@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0fb16976 |
|
11-Jun-2021 |
Calvin Johnson <calvin.johnson@oss.nxp.com> |
net: phy: Introduce fwnode_mdio_find_device() Define fwnode_mdio_find_device() to get a pointer to the mdio_device from fwnode passed to the function. Refactor of_mdio_find_device() to use fwnode_mdio_find_device(). Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Grant Likely <grant.likely@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b040aab7 |
|
06-Jun-2021 |
Wong Vee Khee <vee.khee.wong@linux.intel.com> |
net: phy: probe for C45 PHYs that return PHY ID of zero in C22 space PHY devices such as the Marvell Alaska 88E2110 does not return a valid PHY ID when probed using Clause-22. The current implementation treats PHY ID of zero as a non-error and valid PHY ID, and causing the PHY device failed to bind to the Marvell driver. For such devices, we do an additional probe in the Clause-45 space, if a valid PHY ID is returned, we then proceed to attach the PHY device to the matching PHY ID driver. Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b269875f |
|
21-May-2021 |
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> |
net: phy: Fix inconsistent indenting Eliminate the follow smatch warning: drivers/net/phy/phy_device.c:2886 phy_probe() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
014068dc |
|
19-Apr-2021 |
Oleksij Rempel <linux@rempel-privat.de> |
net: phy: genphy_loopback: add link speed configuration In case of loopback, in most cases we need to disable autoneg support and force some speed configuration. Otherwise, depending on currently active auto negotiated link speed, the loopback may or may not work. This patch was tested with following PHYs: TJA1102, KSZ8081, KSZ9031, AT8035, AR9331. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f4f86d8d |
|
19-Apr-2021 |
Oleksij Rempel <linux@rempel-privat.de> |
net: phy: execute genphy_loopback() per default on all PHYs The generic loopback is really generic and is defined by the 802.3 standard, we should just mandate that drivers implement a custom loopback if the generic one cannot work. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fba863b8 |
|
07-Apr-2021 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM Resume callback of the PHY driver is called after the one for the MAC driver. The PHY driver resume callback calls phy_init_hw(), and this is potentially problematic if the MAC driver calls phy_start() in its resume callback. One issue was reported with the fec driver and a KSZ8081 PHY which seems to become unstable if a soft reset is triggered during aneg. The new flag allows MAC drivers to indicate that they take care of suspending/resuming the PHY. Then the MAC PM callbacks can handle any dependency between MAC and PHY PM. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
b0bade51 |
|
10-Mar-2021 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: Expose phydev::dev_flags through sysfs phydev::dev_flags contains a bitmask of configuration bits requested by the consumer of a PHY device (Ethernet MAC or switch) towards the PHY driver. Since these flags are often used for requesting LED or other type of configuration being able to quickly audit them without instrumenting the kernel is useful. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7f654157 |
|
25-Feb-2021 |
Arnd Bergmann <arnd@arndb.de> |
net: phy: make mdio_bus_phy_suspend/resume as __maybe_unused When CONFIG_PM_SLEEP is disabled, the compiler warns about unused functions: drivers/net/phy/phy_device.c:273:12: error: unused function 'mdio_bus_phy_suspend' [-Werror,-Wunused-function] static int mdio_bus_phy_suspend(struct device *dev) drivers/net/phy/phy_device.c:293:12: error: unused function 'mdio_bus_phy_resume' [-Werror,-Wunused-function] static int mdio_bus_phy_resume(struct device *dev) The logic is intentional, so just mark these two as __maybe_unused and remove the incorrect #ifdef. Fixes: 4c0d2e96ba05 ("net: phy: consider that suspend2ram may cut off PHY power") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210225145748.404410-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
b834489b |
|
16-Feb-2021 |
Robert Hancock <robert.hancock@calian.com> |
net: phy: Add is_on_sfp_module flag and phy_on_sfp helper Add a flag and helper function to indicate that a PHY device is part of an SFP module, which is set on attach. This can be used by PHY drivers to handle SFP-specific quirks or behavior. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
93e8990c |
|
14-Feb-2021 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: rename PHY_IGNORE_INTERRUPT to PHY_MAC_INTERRUPT Some internal PHY's have their events like link change reported by the MAC interrupt. We have PHY_IGNORE_INTERRUPT to deal with this scenario. I'm not too happy with this name. We don't ignore interrupts, typically there is no interrupt exposed at a PHY level. So let's rename it to PHY_MAC_INTERRUPT. This is in line with phy_mac_interrupt(), which is called from the MAC interrupt handler to handle PHY events. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4c0d2e96 |
|
11-Feb-2021 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: consider that suspend2ram may cut off PHY power Claudiu reported that on his system S2R cuts off power to the PHY and after resuming certain PHY settings are lost. The PM folks confirmed that cutting off power to selected components in S2R is a valid case. Therefore resuming from S2R, same as from hibernation, has to assume that the PHY has power-on defaults. As a consequence use the restore callback also as resume callback. In addition make sure that the interrupt configuration is restored. Let's do this in phy_init_hw() and ensure that after this call actual interrupt configuration is in sync with phydev->interrupts. Currently, if interrupt was enabled before hibernation, we would resume with interrupt disabled because that's the power-on default. This fix applies cleanly only after the commit marked as fixed. I don't have an affected system, therefore change is compile-tested only. [0] https://lore.kernel.org/netdev/1610120754-14331-1-git-send-email-claudiu.beznea@microchip.com/ Fixes: 611d779af7ca ("net: phy: fix MDIO bus PM PHY resuming") Reported-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4217a64e |
|
09-Feb-2021 |
Michael Walle <michael@walle.cc> |
net: phy: introduce phydev->port At the moment, PORT_MII is reported in the ethtool ops. This is odd because it is an interface between the MAC and the PHY and no external port. Some network card drivers will overwrite the port to twisted pair or fiber, though. Even worse, the MDI/MDIX setting is only used by ethtool if the port is twisted pair. Set the port to PORT_TP by default because most PHY drivers are copper ones. If there is fibre support and it is enabled, the PHY driver will set it to PORT_FIBRE. This will change reporting PORT_MII to either PORT_TP or PORT_FIBRE; except for the genphy fallback driver. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e6e918d4 |
|
06-Jan-2021 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: replace mutex_is_locked with lockdep_assert_held in phylib Switch to lockdep_assert_held(_once), similar to what is being done in other subsystems. One advantage is that there's zero runtime overhead if lockdep support isn't enabled. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/ccc40b9d-8ee0-43a1-5009-2cc95ca79c85@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
6527b938 |
|
23-Nov-2020 |
Ioana Ciornei <ioana.ciornei@nxp.com> |
net: phy: remove the .did_interrupt() and .ack_interrupt() callback Now that all the PHY drivers have been migrated to directly implement the generic .handle_interrupt() callback for a seamless support of shared IRQs and all the .config_inter() implementations clear any pending interrupts, we can safely remove the two callbacks. With this patch, phylib has a proper support for shared IRQs (and not just for multi-PHY devices. A PHY driver must implement both the .handle_interrupt() and .config_intr() callbacks for the IRQs to be actually used. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
69280228 |
|
16-Nov-2020 |
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
net: phy: fix kernel-doc markups Some functions have different names between their prototypes and the kernel-doc markup. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
a98cabdb |
|
15-Nov-2020 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: don't duplicate driver name in phy_attached_print Currently we print the driver name twice in phy_attached_print(): - phy_dev_info() prints it as part of the device info - and we print it as part of the info string This is a little bit ugly, it makes the info harder to read, especially if the driver name is a little bit longer. Therefore omit the driver name (if set) in the info string. Example from r8169 that uses phylib: old: Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver \ [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) new: Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver \ (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/8ab72586-f079-41d8-84ee-9f6a5bd97b2a@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
87de1f05 |
|
01-Nov-2020 |
Ioana Ciornei <ioana.ciornei@nxp.com> |
net: phy: add genphy_handle_interrupt_no_ack() It seems there are cases where the interrupts are handled by another entity (ie an IRQ controller embedded inside the PHY) and do not need any other interraction from phylib. For this kind of PHYs, like the RTL8366RB, add the genphy_handle_interrupt_no_ack() function which just triggers the link state machine. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
7b2d5908 |
|
01-Nov-2020 |
Ioana Ciornei <ioana.ciornei@nxp.com> |
net: phy: make .ack_interrupt() optional As a first step into making phylib and all PHY drivers to actually have support for shared IRQs, make the .ack_interrupt() callback optional. After all drivers have been moved to implement the generic interrupt handle, the phy_drv_supports_irq() check will be changed again to only require the .handle_interrupts() callback. Cc: Alexandru Ardelean <alexandru.ardelean@analog.com> Cc: Andre Edich <andre.edich@microchip.com> Cc: Antoine Tenart <atenart@kernel.org> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Dan Murphy <dmurphy@ti.com> Cc: Divya Koppera <Divya.Koppera@microchip.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Kavya Sree Kotagiri <kavyasree.kotagiri@microchip.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Marco Felsch <m.felsch@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Mathias Kresin <dev@kresin.me> Cc: Maxim Kochetkov <fido_max@inbox.ru> Cc: Michael Walle <michael@walle.cc> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Nisar Sayed <Nisar.Sayed@microchip.com> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Philippe Schenker <philippe.schenker@toradex.com> Cc: Willy Liu <willy.liu@realtek.com> Cc: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
e2f016cf |
|
01-Nov-2020 |
Ioana Ciornei <ioana.ciornei@nxp.com> |
net: phy: add a shutdown procedure In case of a board which uses a shared IRQ we can easily end up with an IRQ storm after a forced reboot. For example, a 'reboot -f' will trigger a call to the .shutdown() callbacks of all devices. Because phylib does not implement that hook, the PHY is not quiesced, thus it can very well leave its IRQ enabled. At the next boot, if that IRQ line is found asserted by the first PHY driver that uses it, but _before_ the driver that is _actually_ keeping the shared IRQ asserted is probed, the IRQ is not going to be acknowledged, thus it will keep being fired preventing the boot process of the kernel to continue. This is even worse when the second PHY driver is a module. To fix this, implement the .shutdown() callback and disable the interrupts if these are used. Note that we are still susceptible to IRQ storms if the previous kernel exited with a panic or if the bootloader left the shared IRQ active, but there is absolutely nothing we can do about these cases. Cc: Alexandru Ardelean <alexandru.ardelean@analog.com> Cc: Andre Edich <andre.edich@microchip.com> Cc: Antoine Tenart <atenart@kernel.org> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Dan Murphy <dmurphy@ti.com> Cc: Divya Koppera <Divya.Koppera@microchip.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Kavya Sree Kotagiri <kavyasree.kotagiri@microchip.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Marco Felsch <m.felsch@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Mathias Kresin <dev@kresin.me> Cc: Maxim Kochetkov <fido_max@inbox.ru> Cc: Michael Walle <michael@walle.cc> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Nisar Sayed <Nisar.Sayed@microchip.com> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Philippe Schenker <philippe.schenker@toradex.com> Cc: Willy Liu <willy.liu@realtek.com> Cc: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
c2b727df |
|
16-Sep-2020 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: Avoid NPD upon phy_detach() when driver is unbound If we have unbound the PHY driver prior to calling phy_detach() (often via phy_disconnect()) then we can cause a NULL pointer de-reference accessing the driver owner member. The steps to reproduce are: echo unimac-mdio-0:01 > /sys/class/net/eth0/phydev/driver/unbind ip link set eth0 down Fixes: cafe8df8b9bc ("net: phy: Fix lack of reference count on PHY driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7d3ba936 |
|
08-Sep-2020 |
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> |
net: phy: call phy_disable_interrupts() in phy_attach_direct() instead Since the micrel phy driver calls phy_init_hw() as a workaround, the commit 9886a4dbd2aa ("net: phy: call phy_disable_interrupts() in phy_init_hw()") disables the interrupt unexpectedly. So, call phy_disable_interrupts() in phy_attach_direct() instead. Otherwise, the phy cannot link up after the ethernet cable was disconnected. Note that other drivers (like at803x.c) also calls phy_init_hw(). So, perhaps, the driver caused a similar issue too. Fixes: 9886a4dbd2aa ("net: phy: call phy_disable_interrupts() in phy_init_hw()") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
df561f66 |
|
23-Aug-2020 |
Gustavo A. R. Silva <gustavoars@kernel.org> |
treewide: Use fallthrough pseudo-keyword Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
#
d02cbc46 |
|
06-Aug-2020 |
Johan Hovold <johan@kernel.org> |
net: phy: fix memory leak in device-create error path A recent commit introduced a late error path in phy_device_create() which fails to release the device name allocated by dev_set_name(). Fixes: 13d0ab6750b2 ("net: phy: check return code when requesting PHY driver module") Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fb16d465 |
|
20-Jul-2020 |
Vladimir Oltean <vladimir.oltean@nxp.com> |
net: phy: fix check in get_phy_c45_ids After the patch below, the iteration through the available MMDs is completely short-circuited, and devs_in_pkg remains set to the initial value of zero. Due to devs_in_pkg being zero, the rest of get_phy_c45_ids() is short-circuited too: the following loop never reaches below this point either (it executes "continue" for every device in package, failing to retrieve PHY ID for any of them): /* Now probe Device Identifiers for each device present. */ for (i = 1; i < num_ids; i++) { if (!(devs_in_pkg & (1 << i))) continue; So c45_ids->device_ids remains populated with zeroes. This causes an Aquantia AQR412 PHY (same as any C45 PHY would, in fact) to be probed by the Generic PHY driver. The issue seems to be a case of submitting partially committed work (and therefore testing something other than was submitted). The intention of the patch was to delay exiting the loop until one more condition is reached (the devs_in_pkg read from hardware is either 0, OR mostly f's). So fix the patch to reflect that. Tested with traffic on a LS1028A-QDS, the PHY is now probed correctly using the Aquantia driver. The devs_in_pkg bit field is set to 0xe000009a, and the MMDs that are present have the following IDs: [ 5.600772] libphy: get_phy_c45_ids: device_ids[1]=0x3a1b662 [ 5.618781] libphy: get_phy_c45_ids: device_ids[3]=0x3a1b662 [ 5.630797] libphy: get_phy_c45_ids: device_ids[4]=0x3a1b662 [ 5.654535] libphy: get_phy_c45_ids: device_ids[7]=0x3a1b662 [ 5.791723] libphy: get_phy_c45_ids: device_ids[29]=0x3a1b662 [ 5.804050] libphy: get_phy_c45_ids: device_ids[30]=0x3a1b662 [ 5.816375] libphy: get_phy_c45_ids: device_ids[31]=0x0 [ 7.690237] mscc_felix 0000:00:00.5: PHY [0.5:00] driver [Aquantia AQR412] (irq=POLL) [ 7.704739] mscc_felix 0000:00:00.5: PHY [0.5:01] driver [Aquantia AQR412] (irq=POLL) [ 7.718918] mscc_felix 0000:00:00.5: PHY [0.5:02] driver [Aquantia AQR412] (irq=POLL) [ 7.733044] mscc_felix 0000:00:00.5: PHY [0.5:03] driver [Aquantia AQR412] (irq=POLL) Fixes: bba238ed037c ("net: phy: continue searching for C45 MMDs even if first returned ffff:ffff") Reported-by: Colin King <colin.king@canonical.com> Reported-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
bba238ed |
|
12-Jul-2020 |
Vladimir Oltean <vladimir.oltean@nxp.com> |
net: phy: continue searching for C45 MMDs even if first returned ffff:ffff At the time of introduction, in commit bdeced75b13f ("net: dsa: felix: Add PCS operations for PHYLINK"), support for the Lynx PCS inside Felix was relying, for USXGMII support, on the fact that get_phy_device() is able to parse the Lynx PCS "device-in-package" registers for this C45 MDIO device and identify it correctly. However, this was actually working somewhat by mistake (in the sense that, even though it was detected, it was detected for the wrong reasons). The get_phy_c45_ids() function works by iterating through all MMDs starting from 1 (MDIO_MMD_PMAPMD) and stops at the first one which returns a non-zero value in the "device-in-package" register pair, proceeding to see what that non-zero value is. For the Felix PCS, the first MMD (1, for the PMA/PMD) returns a non-zero value of 0xffffffff in the "device-in-package" registers. There is a code branch which is supposed to treat this case and flag it as wrong, and normally, this would have caught my attention when adding initial support for this PCS: if ((devs_in_pkg & 0x1fffffff) == 0x1fffffff) { /* If mostly Fs, there is no device there, then let's probe * MMD 0, as some 10G PHYs have zero Devices In package, * e.g. Cortina CS4315/CS4340 PHY. */ However, this code never actually kicked in, it seems, because this snippet from get_phy_c45_devs_in_pkg() was basically sabotaging itself, by returning 0xfffffffe instead of 0xffffffff: /* Bit 0 doesn't represent a device, it indicates c22 regs presence */ *devices_in_package &= ~BIT(0); Then the rest of the code just carried on thinking "ok, MMD 1 (PMA/PMD) says that there are 31 devices in that package, each having a device id of ffff:ffff, that's perfectly fine, let's go ahead and probe this PHY device". But after cleanup commit 320ed3bf9000 ("net: phy: split devices_in_package"), this got "fixed", and now devs_in_pkg is no longer 0xfffffffe, but 0xffffffff. So now, get_phy_device is returning -ENODEV for the Lynx PCS, because the semantics have remained mostly unchanged: the loop stops at the first MMD that returns a non-zero value, and that is MMD 1. But the Lynx PCS is simply a clause 37 PCS which implements the required MAC-side functionality for USXGMII (when operated in C45 mode, which is where C45 devices-in-package detection is relevant to). Of course it will fail the PMD/PMA test (MMD 1), since it is not a PHY. But it does implement detection for MDIO_MMD_PCS (3): - MDIO_DEVS1=0x008a, MDIO_DEVS2=0x0000, - MDIO_DEVID1=0x0083, MDIO_DEVID2=0xe400 Let get_phy_c45_ids() continue searching for valid MMDs, and don't assume that every phy_device has a PMA/PMD MMD implemented. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
bd36ed1c |
|
08-Jul-2020 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: Define PHY statistics ethtool_phy_ops Extend ethtool_phy_ops to include the 3 function pointers necessary for implementing PHY statistics. In a subsequent change we will uninline those functions. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
55d8f053 |
|
05-Jul-2020 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: Register ethtool PHY operations Utilize ethtool_set_ethtool_phy_ops to register a suitable set of PHY ethtool operations in a dynamic fashion such that ethtool will no longer directy reference PHY library symbols. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4f2b38e3 |
|
06-Jul-2020 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: Make phy_10gbit_fec_features_array static This array is not used outside of phy_device.c, so make it static. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3970ed49 |
|
06-Jul-2020 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: Properly define genphy_c45_driver Avoid the W=1 warning that symbol 'genphy_c45_driver' was not declared. Should it be static? Declare it on the phy header file. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1dba6995 |
|
26-Jun-2020 |
Bartosz Golaszewski <bgolaszewski@baylibre.com> |
net: phy: reset the PHY even if probe() is not implemented Currently we only call phy_device_reset() if the PHY driver implements the probe() callback. This is not mandatory and many drivers (e.g. realtek) don't need probe() for most devices but still can have reset GPIOs defined. There's no reason to depend on the presence of probe() here so pull the reset code out of the if clause. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e42bcd0f |
|
26-Jun-2020 |
Bartosz Golaszewski <bgolaszewski@baylibre.com> |
net: phy: arrange headers in phy_device.c alphabetically Keeping the headers in alphabetical order is better for readability and allows to easily see if given header is already included. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
92252eec |
|
24-Jun-2020 |
Dan Murphy <dmurphy@ti.com> |
net: phy: Add a helper to return the index for of the internal delay Add a helper function that will return the index in the array for the passed in internal delay value. The helper requires the array, size and delay value. The helper will then return the index for the exact match or return the index for the index to the closest smaller value. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9886a4db |
|
24-Jun-2020 |
Jisheng Zhang <Jisheng.Zhang@synaptics.com> |
net: phy: call phy_disable_interrupts() in phy_init_hw() Call phy_disable_interrupts() in phy_init_hw() to "have a defined init state as we don't know in which state the PHY is if the PHY driver is loaded. We shouldn't assume that it's the chip power-on defaults, BIOS or boot loader could have changed this. Or in case of dual-boot systems the other OS could leave the PHY in whatever state." as pointed out by Heiner. Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
389a3389 |
|
18-Jun-2020 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: read MMD ID from all present MMDs Expand the device_ids[] array to allow all MMD IDs to be read rather than just the first 8 MMDs, but only read the ID if the MDIO_STAT2 register reports that a device really is present here for these new devices to maintain compatibility with our current behaviour. Note that only a limited number of devices have MDIO_STAT2. 88X3310 PHY vendor MMDs do are marked as present in the devices_in_package, but do not contain IEE 802.3 compatible register sets in their lower space. This avoids reading incorrect values as MMD identifiers. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
320ed3bf |
|
18-Jun-2020 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: split devices_in_package We have two competing requirements for the devices_in_package field. We want to use it as a bit array indicating which MMDs are present, but we also want to know if the Clause 22 registers are present. Since "devices in package" is a term used in the 802.3 specification, keep this as the as-specified values read from the PHY, and introduce a new member "mmds_present" to indicate which MMDs are actually present in the PHY, derived from the "devices in package" value. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5ba33cf4 |
|
18-Jun-2020 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: set devices_in_package only after validation Only set the devices_in_package to a non-zero value if we find a valid value for this field, so we avoid leaving it set to e.g. 0x1fffffff. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c746053d |
|
18-Jun-2020 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: add support for probing MMDs >= 8 for devices-in-package Add support for probing MMDs above 7 for a valid devices-in-package specifier, but only probe the vendor MMDs for this if they also report that there the device is present in status register 2. This avoids issues where the MMD is implemented, but does not provide IEEE 802.3 compliant registers (such as the MV88X3310 PHY.) Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
439625a7 |
|
18-Jun-2020 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: reword get_phy_device() kerneldoc Reword the get_phy_device() kerneldoc to be more explicit about how we probe for the PHY, and what the various return conditions signify. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ee951005 |
|
18-Jun-2020 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: clean up get_phy_c22_id() invalid ID handling Move the ID check from get_phy_device() into get_phy_c22_id(), which simplifies get_phy_device(). The ID reading functions are now responsible for indicating whether they found a PHY or not via their return code - they must return -ENODEV when a PHY is not present. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
48c54388 |
|
18-Jun-2020 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: clean up get_phy_c45_ids() failure handling When we decide that a PHY is not present, we do not need to go through the hoops of setting *phy_id to 0xffffffff, and then return zero to make get_phy_device() fail - we can return -ENODEV which will have the same effect. Doing so means we no longer have to pass a pointer to phy_id in, and we can then clean up the clause 22 path in a similar way. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e6306261 |
|
18-Jun-2020 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: clean up PHY ID reading Rearrange the code to read the PHY IDs, so we don't call get_phy_id() only to immediately call get_phy_c45_ids(). Move that logic into get_phy_device(), which results in better readability. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
454a78d1 |
|
18-Jun-2020 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: clean up cortina workaround Move the Cortina PHY workaround out of the "devices in package" loop; it doesn't need to be in there as the control flow will terminate the loop once we enter the workaround irrespective of the workaround's outcome. The workaround is triggered by the ID being mostly 1's, which will in any case terminate the loop. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b2ffc75e |
|
19-Jun-2020 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: Check harder for errors in get_phy_id() Commit 02a6efcab675 ("net: phy: allow scanning busses with missing phys") added a special condition to return -ENODEV in case -ENODEV or -EIO was returned from the first read of the MII_PHYSID1 register. In case the MDIO bus data line pull-up is not strong enough, the MDIO bus controller will not flag this as a read error. This can happen when a pluggable daughter card is not connected and weak internal pull-ups are used (since that is the only option, otherwise the pins are floating). The second read of MII_PHYSID2 will be correctly flagged an error though, but now we will return -EIO which will be treated as a hard error, thus preventing MDIO bus scanning loops to continue succesfully. Apply the same logic to both register reads, thus allowing the scanning logic to proceed. Fixes: 02a6efcab675 ("net: phy: allow scanning busses with missing phys") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
90ce665c |
|
26-May-2020 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: mdiobus: add clause 45 mdiobus accessors There is a recurring pattern throughout some of the PHY code converting a devad and regnum to our packed clause 45 representation. Rather than having this scattered around the code, let's put a common translation function in mdio.h, and provide some register accessors. Convert the phylib core, phylink, bcm87xx and cortina to use these. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a307593a |
|
18-May-2020 |
Doug Berger <opendmb@gmail.com> |
net: phy: simplify phy_link_change arguments This function was introduced to allow for different handling of link up and link down events particularly with regard to the netif_carrier. The third argument do_carrier allowed the flag to be left unchanged. Since then the phylink has introduced an implementation that completely ignores the third parameter since it never wants to change the flag and the phylib always sets the third parameter to true so the flag is always changed. Therefore the third argument (i.e. do_carrier) is no longer necessary and can be removed. This also means that the phylib phy_link_down() function no longer needs its second argument. Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e3f2d557 |
|
17-May-2020 |
Leon Romanovsky <leon@kernel.org> |
net: phy: propagate an error back to the callers of phy_sfp_probe The compilation warning below reveals that the errors returned from the sfp_bus_add_upstream() call are not propagated to the callers. Fix it by returning "ret". 14:37:51 drivers/net/phy/phy_device.c: In function 'phy_sfp_probe': 14:37:51 drivers/net/phy/phy_device.c:1236:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] 14:37:51 1236 | int ret; 14:37:51 | ^~~ Fixes: 298e54fa810e ("net: phy: add core phylib sfp support") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3a13f98b |
|
07-May-2020 |
Colin Ian King <colin.king@canonical.com> |
net: phy: fix less than zero comparison with unsigned variable val The unsigned variable val is being checked for an error by checking if it is less than zero. This can never occur because val is unsigned. Fix this by making val a plain int. Addresses-Coverity: ("Unsigned compared against zero") Fixes: bdbdac7649fa ("ethtool: provide UAPI for PHY master/slave configuration.") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
bdbdac76 |
|
05-May-2020 |
Oleksij Rempel <linux@rempel-privat.de> |
ethtool: provide UAPI for PHY master/slave configuration. This UAPI is needed for BroadR-Reach 100BASE-T1 devices. Due to lack of auto-negotiation support, we needed to be able to configure the MASTER-SLAVE role of the port manually or from an application in user space. The same UAPI can be used for 1000BASE-T or MultiGBASE-T devices to force MASTER or SLAVE role. See IEEE 802.3-2018: 22.2.4.3.7 MASTER-SLAVE control register (Register 9) 22.2.4.3.8 MASTER-SLAVE status register (Register 10) 40.5.2 MASTER-SLAVE configuration resolution 45.2.1.185.1 MASTER-SLAVE config value (1.2100.14) 45.2.7.10 MultiGBASE-T AN control 1 register (Register 7.32) The MASTER-SLAVE role affects the clock configuration: ------------------------------------------------------------------------------- When the PHY is configured as MASTER, the PMA Transmit function shall source TX_TCLK from a local clock source. When configured as SLAVE, the PMA Transmit function shall source TX_TCLK from the clock recovered from data stream provided by MASTER. iMX6Q KSZ9031 XXX ------\ /-----------\ /------------\ | | | | | MAC |<----RGMII----->| PHY Slave |<------>| PHY Master | |<--- 125 MHz ---+-<------/ | | \ | ------/ \-----------/ \------------/ ^ \-TX_TCLK ------------------------------------------------------------------------------- Since some clock or link related issues are only reproducible in a specific MASTER-SLAVE-role, MAC and PHY configuration, it is beneficial to provide generic (not 100BASE-T1 specific) interface to the user space for configuration flexibility and trouble shooting. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
63490847 |
|
06-May-2020 |
Michael Walle <michael@walle.cc> |
net: phy: add concept of shared storage for PHYs There are packages which contain multiple PHY devices, eg. a quad PHY transceiver. Provide functions to allocate and free shared storage. Usually, a quad PHY contains global registers, which don't belong to any PHY. Provide convenience functions to access these registers. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9576e9fa |
|
23-Apr-2020 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: clear phydev->suspended after soft reset If a soft reset is triggered whilst PHY is in power-down, then phydev->suspended will remain set. Seems we didn't face any issue yet caused by this, but better reset the suspended flag after soft reset. See also the following from 22.2.4.1.1 Resetting a PHY is accomplished by setting bit 0.15 to a logic one. This action shall set the status and control registers to their default states. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
31949154 |
|
23-Apr-2020 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: remove genphy_no_soft_reset Since 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") we don't need genphy_no_soft_reset() any longer. Not setting callback soft_reset results in a no-op now. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d70c47c8 |
|
23-Apr-2020 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: make phy_suspend a no-op if PHY is suspended already Gently handle the case that phy_suspend() is called whilst PHY is in power-down. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8a8f8281 |
|
26-Mar-2020 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: don't touch suspended flag if there's no suspend/resume callback So far we set phydev->suspended to true in phy_suspend() even if the PHY driver doesn't implement the suspend callback. This applies accordingly for the resume path. The current behavior doesn't cause any issue I'd be aware of, but it's not logical and misleading, especially considering the description of the flag: "suspended: Set to true if this phy has been suspended successfully" Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
16983507 |
|
26-Mar-2020 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: probe PHY drivers synchronously If we have scenarios like mdiobus_register() -> loads PHY driver module(s) -> registers PHY driver(s) -> may schedule async probe phydev = mdiobus_get_phy() <phydev action involving PHY driver> or phydev = phy_device_create() -> loads PHY driver module -> registers PHY driver -> may schedule async probe <phydev action involving PHY driver> then we expect the PHY driver to be bound to the phydev when triggering the action. This may not be the case in case of asynchronous probing. Therefore ensure that PHY drivers are probed synchronously. Default still is sync probing, except async probing is explicitly requested. I saw some comments that the intention is to promote async probing for more parallelism in boot process and want to be prepared for the case that the default is changed to async probing. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
745a237c |
|
23-Mar-2020 |
Dejin Zheng <zhengdejin5@gmail.com> |
net: phy: use phy_read_poll_timeout() to simplify the code use phy_read_poll_timeout() to replace the poll codes for simplify the code in phy_poll_reset() function. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
611d779a |
|
12-Mar-2020 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: fix MDIO bus PM PHY resuming So far we have the unfortunate situation that mdio_bus_phy_may_suspend() is called in suspend AND resume path, assuming that function result is the same. After the original change this is no longer the case, resulting in broken resume as reported by Geert. To fix this call mdio_bus_phy_may_suspend() in the suspend path only, and let the phy_device store the info whether it was suspended by MDIO bus PM. Fixes: 503ba7c69610 ("net: phy: Avoid multiple suspends") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4f31c532 |
|
25-Feb-2020 |
Sudheesh Mavila <sudheesh.mavila@amd.com> |
net: phy: corrected the return value for genphy_check_and_restart_aneg and genphy_c45_check_and_restart_aneg When auto-negotiation is not required, return value should be zero. Changes v1->v2: - improved comments and code as Andrew Lunn and Heiner Kallweit suggestion - fixed issue in genphy_c45_check_and_restart_aneg as Russell King suggestion. Fixes: 2a10ab043ac5 ("net: phy: add genphy_check_and_restart_aneg()") Fixes: 1af9f16840e9 ("net: phy: add genphy_c45_check_and_restart_aneg()") Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
503ba7c6 |
|
20-Feb-2020 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: Avoid multiple suspends It is currently possible for a PHY device to be suspended as part of a network device driver's suspend call while it is still being attached to that net_device, either via phy_suspend() or implicitly via phy_stop(). Later on, when the MDIO bus controller get suspended, we would attempt to suspend again the PHY because it is still attached to a network device. This is both a waste of time and creates an opportunity for improper clock/power management bugs to creep in. Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e96bd2d3 |
|
18-Feb-2020 |
Petr Oros <poros@redhat.com> |
phy: avoid unnecessary link-up delay in polling mode commit 93c0970493c71f ("net: phy: consider latched link-down status in polling mode") removed double-read of latched link-state register for polling mode from genphy_update_link(). This added extra ~1s delay into sequence link down->up. Following scenario: - After boot link goes up - phy_start() is called triggering an aneg restart, hence link goes down and link-down info is latched. - After aneg has finished link goes up. In phy_state_machine is checked link state but it is latched "link is down". The state machine is scheduled after one second and there is detected "link is up". This extra delay can be avoided when we keep link-state register double read in case when link was down previously. With this solution we don't miss a link-down event in polling mode and link-up is faster. Details about this quirky behavior on Realtek phy: Without patch: T0: aneg is started, link goes down, link-down status is latched T0+3s: state machine runs, up-to-date link-down is read T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), here i read link-down (BMSR_LSTATUS==0), T0+5s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), up-to-date link-up is read (BMSR_LSTATUS==1), phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING With patch: T0: aneg is started, link goes down, link-down status is latched T0+3s: state machine runs, up-to-date link-down is read T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), first BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==0, second BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==1, phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
45c767fa |
|
15-Feb-2020 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: add linkmode helper for setting flow control advertisement Add a linkmode helper to set the flow control advertisement in an ethtool linkmode mask according to the tx/rx capabilities. This implementation is moved from phylib, and documented with an analysis of its shortcomings. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a87ae8a9 |
|
15-Feb-2020 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: add helpers to resolve negotiated flow control Add a couple of helpers to resolve negotiated flow control. Two helpers are provided: - linkmode_resolve_pause() which takes the link partner and local advertisements, and decodes whether we should enable TX or RX pause at the MAC. This is useful outside of phylib, e.g. in phylink. - phy_get_pause(), which returns the TX/RX enablement status for the current negotiation results of the PHY. This allows us to centralise the flow control resolution, rather than spreading it around. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e27f1787 |
|
12-Jan-2020 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: Added IRQ print to phylink_bringup_phy() The information about the PHY attached to the PHYLINK instance is useful but is missing the IRQ prints that phy_attached_info() adds. phy_attached_info() is a bit long and it would not be possible to use phylink_info() anyway. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1dca22b1 |
|
25-Dec-2019 |
Richard Cochran <richardcochran@gmail.com> |
net: mdio: of: Register discovered MII time stampers. When parsing a PHY node, register its time stamper, if any, and attach the instance to the PHY device. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4715f65f |
|
25-Dec-2019 |
Richard Cochran <richardcochran@gmail.com> |
net: Introduce a new MII time stamping interface. Currently the stack supports time stamping in PHY devices. However, there are newer, non-PHY devices that can snoop an MII bus and provide time stamps. In order to support such devices, this patch introduces a new interface to be used by both PHY and non-PHY devices. In addition, the one and only user of the old PHY time stamping API is converted to the new interface. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7d49a32a |
|
19-Dec-2019 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: ensure that phy IDs are correctly typed PHY IDs are 32-bit unsigned quantities. Ensure that they are always treated as such, and not passed around as "int"s. Fixes: 13d0ab6750b2 ("net: phy: check return code when requesting PHY driver module") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0efc286a |
|
17-Dec-2019 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: provide and use genphy_read_status_fixed() There are two drivers and generic code which contain exactly the same code to read the status of a PHY operating without autonegotiation enabled. Rather than duplicate this code, provide a helper to read this information. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2a10ab04 |
|
17-Dec-2019 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: add genphy_check_and_restart_aneg() Add a helper for restarting autonegotiation(), similar to the clause 45 variant. Use it in __genphy_config_aneg() Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c48f16b4 |
|
17-Dec-2019 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: remove redundant .aneg_done initialisers Remove initialisers that set .aneg_done to genphy_aneg_done - this is the default for clause 22 PHYs, so the initialiser is redundant. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a5d66f81 |
|
22-Nov-2019 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: initialise phydev speed and duplex sanely When a phydev is created, the speed and duplex are set to zero and -1 respectively, rather than using the predefined SPEED_UNKNOWN and DUPLEX_UNKNOWN constants. There is a window at initialisation time where we may report link down using the 0/-1 values. Tidy this up and use the predefined constants, so debug doesn't complain with: "Unsupported (update phy-core.c)/Unsupported (update phy-core.c)" when the speed and duplex settings are printed. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
#
b95e86d8 |
|
15-Nov-2019 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: avoid matching all-ones clause 45 PHY IDs We currently match clause 45 PHYs using any ID read from a MMD marked as present in the "Devices in package" registers 5 and 6. However, this is incorrect. 45.2 says: "The definition of the term package is vendor specific and could be a chip, module, or other similar entity." so a package could be more or less than the whole PHY - a PHY could be made up of several modules instantiated onto a single chip such as the Marvell 88x3310, or some of the MMDs could be disabled according to chip configuration, such as the Broadcom 84881. In the case of Broadcom 84881, the "Devices in package" registers contain 0xc000009b, meaning that there is a PHYXS present in the package, but all registers in MMD 4 return 0xffff. This leads to our matching code incorrectly binding this PHY to one of our generic PHY drivers. This patch changes the way we determine whether to attempt to match a MMD identifier, or use it to request a module - if the identifier is all-ones, then we skip over it. When reading the identifiers, we initialise phydev->c45_ids.device_ids to all-ones, only reading the device ID if the "Devices in package" registers indicates we should. This avoids the generic drivers incorrectly matching on a PHY ID of 0xffffffff. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
298e54fa |
|
15-Nov-2019 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: add core phylib sfp support Add core phylib help for supporting SFP sockets on PHYs. This provides a mechanism to inform the SFP layer about PHY up/down events, and also unregister the SFP bus when the PHY is going away. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fa6e98ce |
|
22-Oct-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: add support for clause 37 auto-negotiation This patch adds support for clause 37 1000Base-X auto-negotiation. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Tao Ren <taoren@fb.com> Tested-by: René van Dorst <opensource@vdorst.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e7312efb |
|
22-Oct-2019 |
Tao Ren <taoren@fb.com> |
net: phy: modify assignment to OR for dev_flags in phy_attach_direct Modify the assignment to OR when dealing with phydev->dev_flags in phy_attach_direct function, and this is to make sure dev_flags set in driver's probe callback won't be lost. Suggested-by: Andrew Lunn <andrew@lunn.ch> CC: Heiner Kallweit <hkallweit1@gmail.com> CC: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Tao Ren <taoren@fb.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3de5ae54 |
|
15-Oct-2019 |
Yonglong Liu <liuyonglong@huawei.com> |
net: phy: Fix "link partner" information disappear issue Some drivers just call phy_ethtool_ksettings_set() to set the links, for those phy drivers that use genphy_read_status(), if autoneg is on, and the link is up, than execute "ethtool -s ethx autoneg on" will cause "link partner" information disappear. The call trace is phy_ethtool_ksettings_set()->phy_start_aneg() ->linkmode_zero(phydev->lp_advertising)->genphy_read_status(), the link didn't change, so genphy_read_status() just return, and phydev->lp_advertising is zero now. This patch moves the clear operation of lp_advertising from phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and if autoneg on and autoneg not complete, just clear what the generic functions care about. Fixes: 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8d3dc3ac |
|
04-Oct-2019 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: extract link partner advertisement reading Move reading the link partner advertisement out of genphy_read_status() into its own separate function. This will allow re-use of this code by PHY drivers that are able to read the resolved status from the PHY. Tested-by: tinywrkb <tinywrkb@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4b9cb2a5 |
|
16-Aug-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: remove genphy_config_init Now that all users have been removed we can remove genphy_config_init. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
916e571e |
|
15-Aug-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: read MII_CTRL1000 in genphy_read_status only if needed Value of MII_CTRL1000 is needed only if LPA_1000MSFAIL is set. Therefore move reading this register. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c36757eb |
|
12-Aug-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: consider AN_RESTART status when reading link status After configuring and restarting aneg we immediately try to read the link status. On some systems the PHY may not yet have cleared the "aneg complete" and "link up" bits, resulting in a false link-up signal. See [0] for a report. Clause 22 and 45 both require the PHY to keep the AN_RESTART bit set until the PHY actually starts auto-negotiation. Let's consider this in the generic functions for reading link status. The commit marked as fixed is the first one where the patch applies cleanly. [0] https://marc.info/?t=156518400300003&r=1&w=2 Fixes: c1164bb1a631 ("net: phy: check PMAPMD link status only in genphy_c45_read_link") Tested-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
#
f4069cd7 |
|
09-Aug-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: prepare phylib to deal with PHY's extending Clause 22 The integrated PHY in 2.5Gbps chip RTL8125 is the first (known to me) PHY that uses standard Clause 22 for all modes up to 1Gbps and adds 2.5Gbps control using vendor-specific registers. To use phylib for the standard part little extensions are needed: - Move most of genphy_config_aneg to a new function __genphy_config_aneg that takes a parameter whether restarting auto-negotiation is needed (depending on whether content of vendor-specific advertisement register changed). - Don't clear phydev->lp_advertising in genphy_read_status so that we can set non-C22 mode flags before. Basically both changes mimic the behavior of the equivalent Clause 45 functions. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3eef8689 |
|
09-Aug-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: simplify genphy_config_advert by using the linkmode_adv_to_xxx_t functions Using linkmode_adv_to_mii_adv_t and linkmode_adv_to_mii_ctrl1000_t allows to simplify the code. In addition avoiding the conversion to the legacy u32 advertisement format allows to remove the warning. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
aa6b1956 |
|
31-Jul-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: fix race in genphy_update_link In phy_start_aneg() autoneg is started, and immediately after that link and autoneg status are read. As reported in [0] it can happen that at time of this read the PHY has reset the "aneg complete" bit but not yet the "link up" bit, what can result in a false link-up detection. To fix this don't report link as up if we're in aneg mode and PHY doesn't signal "aneg complete". [0] https://marc.info/?t=156413509900003&r=1&w=2 Fixes: 4950c2ba49cc ("net: phy: fix autoneg mismatch case in genphy_read_status") Reported-by: liuyonglong <liuyonglong@huawei.com> Tested-by: liuyonglong <liuyonglong@huawei.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
54638c6e |
|
10-Jul-2019 |
Denis Efremov <efremov@linux.com> |
net: phy: make exported variables non-static The variables phy_basic_ports_array, phy_fibre_port_array and phy_all_ports_features_array are declared static and marked EXPORT_SYMBOL_GPL(), which is at best an odd combination. Because the variables were decided to be a part of API, this commit removes the static attributes and adds the declarations to the header. Fixes: 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode") Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f30e33bc |
|
11-Jun-2019 |
Robert Hancock <hancock@sedsystems.ca> |
net: phy: Add more 1000BaseX support detection Commit "net: phy: Add detection of 1000BaseX link mode support" added support for not filtering out 1000BaseX mode from the PHY's supported modes in genphy_config_init, but we have to make a similar change in genphy_read_abilities in order to actually detect it as a supported mode in the first place. Add this in. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ca72efb6 |
|
04-Jun-2019 |
Robert Hancock <hancock@sedsystems.ca> |
net: phy: Add detection of 1000BaseX link mode support Add 1000BaseX to the link modes which are detected based on the MII_ESTATUS register as per 802.3 Clause 22. This allows PHYs which support 1000BaseX to work properly with drivers using phylink. Previously 1000BaseX support was not detected, and if that was the only mode the PHY indicated support for, phylink would refuse to attach it due to the list of supported modes being empty. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
07b09289 |
|
30-May-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: enable interrupts when PHY is attached already This patch is a step towards allowing PHY drivers to handle more interrupt sources than just link change. E.g. several PHY's have built-in temperature monitoring and can raise an interrupt if a temperature threshold is exceeded. We may be interested in such interrupts also if the phylib state machine isn't started. Therefore move enabling interrupts to phy_request_interrupt(). v2: - patch added to series Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c920f745 |
|
28-May-2019 |
Ioana Ciornei <ioana.ciornei@nxp.com> |
net: phy: Add phy_standalone sysfs entry Export a phy_standalone device attribute that is meant to give the indication that this PHY lacks an attached_dev and its corresponding sysfs link. The attribute will be created only when the phy_attach_direct() function will be called with a NULL net_device. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
82c76aca |
|
28-May-2019 |
Ioana Ciornei <ioana.ciornei@nxp.com> |
net: phy: Check against net_device being NULL In general, we don't want MAC drivers calling phy_attach_direct with the net_device being NULL. Add checks against this in all the functions calling it: phy_attach() and phy_connect_direct(). Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2db2d9d1 |
|
28-May-2019 |
Ioana Ciornei <ioana.ciornei@nxp.com> |
net: phy: Guard against the presence of a netdev A prerequisite for PHYLIB to work in the absence of a struct net_device is to not access pointers to it. Changes are needed in the following areas: - Printing: In some places netdev_err was replaced with phydev_err. - Incrementing reference count to the parent MDIO bus driver: If there is no net device, then the reference count should definitely be incremented since there is no chance that it was an Ethernet driver who registered the MDIO bus. - Sysfs links are not created in case there is no attached_dev. - No netif_carrier_off is done if there is no attached_dev. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
53cfca2d |
|
28-May-2019 |
Vladimir Oltean <olteanv@gmail.com> |
net: phy: Add phy_sysfs_create_links helper function This is a cosmetic patch that wraps the operation of creating sysfs links between the netdev->phydev and the phydev->attached_dev. This is needed to keep the indentation level in check in a follow-up patch where this function will be guarded against the existence of a phydev->attached_dev. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e5fb32c6 |
|
22-May-2019 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: Make phy_basic_t1_features use base100t1. Now that there is a link mode for 100BaseT1, use it in phy_basic_t1_features so T1 PHY drivers will indicate this mode via the Ethtool API. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b4010af9 |
|
01-May-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: fix phy_validate_pause We have valid scenarios where ETHTOOL_LINK_MODE_Pause_BIT doesn't need to be supported. Therefore extend the first check to check for rx_pause being set. See also phy_set_asym_pause: rx=0 and tx=1: advertise asym pause only rx=0 and tx=0: stop advertising both pause modes The fixed commit isn't wrong, it's just the one that introduced the linkmode bitmaps. Fixes: 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
22c0ef6b |
|
01-May-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: improve pause handling When probing the phy device we set sym and asym pause in the "supported" bitmap (unless the PHY tells us otherwise). However we don't know yet whether the MAC supports pause. Simply copying phy->supported to phy->advertising will trigger advertising pause, and that's not what we want. Therefore add phy_advertise_supported() that copies all modes but doesn't touch the pause bits. In phy_support_(a)sym_pause we shouldn't set any bits in the supported bitmap because we may set a bit the PHY intentionally disabled. Effective pause support should be the AND-combined PHY and MAC pause capabilities. If the MAC supports everything, then it's only relevant what the PHY supports. If MAC supports sym pause only, then we have to clear the asym bit in phydev->supported. Copy the pause flags only and don't touch the modes, because a driver may have intentionally removed a mode from phydev->advertising. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
88d6272a |
|
24-Apr-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: avoid unneeded MDIO reads in genphy_read_status Considering that in polling mode each link drop will be latched, settings can't have changed if link was up and is up. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8c90b795 |
|
24-Apr-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: improve genphy_soft_reset PHY's behave differently when being reset. Some reset registers to defaults, some don't. Some trigger an autoneg restart, some don't. So let's also set the autoneg restart bit when resetting. Then PHY behavior should be more consistent. Clearing BMCR_ISOLATE serves the same purpose and is borrowed from genphy_restart_aneg. BMCR holds the speed / duplex settings in fixed mode. Therefore we may have an issue if a soft reset resets BMCR to its default. So better call genphy_setup_forced() afterwards in fixed mode. We've seen no related complaint in the last >10 yrs, so let's treat it as an improvement. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5e42574b |
|
16-Apr-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: don't set autoneg if it's not supported In phy_device_create() we set phydev->autoneg = 1. This isn't changed even if the PHY doesn't support autoneg. This seems to affect very few PHY's, and they disable phydev->autoneg in their config_init callback. So it's more of an improvement, therefore net-next. The patch also wouldn't apply to older kernel versions because the link mode bitmaps have been introduced recently. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b7f29f8c |
|
08-Apr-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: fix setting autoneg_complete in genphy_update_link The original patch didn't set phydev->autoneg_complete in one exit path. Fix this. Fixes: 4950c2ba49cc ("net: phy: fix autoneg mismatch case in genphy_read_status") Reported-by: Simon Horman <horms@verge.net.au> Tested-by: Simon Horman <horms@verge.net.au> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
22b56e82 |
|
07-Apr-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: replace genphy_10g_driver with genphy_c45_driver Recently a number of generic functions for Clause 45 PHY's has been added. So let's replace the old very limited genphy_10g_driver with a genphy_c45_driver. This driver isn't limited to 10G, however it's worth to be noted that Clause 45 doesn't cover 1000Base-T. For using 1000Base-T with a Clause 45 PHY a dedicated PHY driver using vendor registers is needed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3b8b11f9 |
|
05-Apr-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: improve link partner capability detection genphy_read_status() so far checks phydev->supported, not the actual PHY capabilities. This can make a difference if the supported speeds have been limited by of_set_phy_supported() or phy_set_max_speed(). It seems that this issue only affects the link partner advertisements as displayed by ethtool. Also this patch wouldn't apply to older kernels because linkmode bitmaps have been introduced recently. Therefore net-next. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a1deab17 |
|
03-Apr-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: allow a PHY driver to define neither features nor get_features Meanwhile we have generic functions for reading the abilities of Clause 22 / 45 PHY's. This allows to use them as fallback in case callback get_features isn't set. Benefit is the reduction of boilerplate code in PHY drivers. v2: - adjust the comment in phy_driver_register to match the code Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4950c2ba |
|
02-Apr-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: fix autoneg mismatch case in genphy_read_status The original patch didn't consider the case that autoneg process finishes successfully but both link partners have no mode in common. In this case there's no link, nevertheless we may be interested in what the link partner advertised. Like phydev->link we set phydev->autoneg_complete in genphy_update_link() and use the stored value in genphy_read_status(). This way we don't have to read register BMSR again. Fixes: b6163f194c69 ("net: phy: improve genphy_read_status") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2a4d8674 |
|
27-Mar-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: use genphy_read_abilities in genphy driver Currently the genphy driver populates phydev->supported like this: First all possible feature bits are set, then genphy_config_init() reads the available features from the chip and remove all unsupported features from phydev->supported. This can be simplified by using genphy_read_abilities(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
045925e3 |
|
27-Mar-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: add genphy_read_abilities Similar to genphy_c45_pma_read_abilities() add a function to dynamically detect the abilities of a Clause 22 PHY. This is mainly copied from genphy_config_init(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b6163f19 |
|
30-Mar-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: improve genphy_read_status This patch improves few aspects of genphy_read_status(): - Don't initialize lpagb, it's not needed. - Move initializing phydev->speed et al before the if clause. - In auto-neg case, skip populating lp_advertising if we don't have a link. This avoids quite some unnecessary MDIO reads in case of phylib polling mode. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d29f5aa0 |
|
22-Mar-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: don't clear BMCR in genphy_soft_reset So far we effectively clear the BMCR register. Some PHY's can deal with this (e.g. because they reset BMCR to a default as part of a soft-reset) whilst on others this causes issues because e.g. the autoneg bit is cleared. Marvell is an example, see also thread [0]. So let's be a little bit more gentle and leave all bits we're not interested in as-is. This change is needed for PHY drivers to properly deal with the original patch. [0] https://marc.info/?t=155264050700001&r=1&w=2 Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Tested-by: Phil Reid <preid@electromag.com.au> Tested-by: liweihang <liweihang@hisilicon.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cd34499c |
|
18-Feb-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: export genphy_config_eee_advert We want to use this function in phy-c45.c too, therefore export it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
51f9f234 |
|
18-Feb-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: don't use 10BaseT/half as default in genphy_read_status If link partner and we can't agree on any mode, then it doesn't make sense to pretend we would have agreed on 10/half. Therefore set a proper default. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
40d5432c |
|
18-Feb-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: remove orphaned register read in genphy_read_status After recent changes to genphy_read_status() this orphaned register read remained as leftover. So remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5502b218 |
|
14-Feb-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: use phy_resolve_aneg_linkmode in genphy_read_status Now that we have phy_resolve_aneg_linkmode() we can make genphy_read_status() much simpler. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3feb9b23 |
|
11-Feb-2019 |
Maxime Chevallier <maxime.chevallier@bootlin.com> |
net: phy: Move of_set_phy_eee_broken to phy-core.c Since of_set_phy_supported was moved to phy-core.c, we can also move of_set_phy_eee_broken to the same location, so that we have all OF functions in the same place. This patch doesn't intend to introduce any change in behaviour. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a4eaed9f |
|
11-Feb-2019 |
Maxime Chevallier <maxime.chevallier@bootlin.com> |
net: phy: Mask-out non-compatible modes when setting the max-speed When setting a PHY's max speed using either the max-speed DT property or ethtool, we should mask-out all non-compatible modes according to the settings table, instead of just the 10/100BASET modes. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9f771f1f |
|
11-Feb-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: simplify genphy_config_eee_advert Use new function phy_modify_mmd_changed(), the result speaks for itself. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4f9744ed |
|
10-Feb-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: use phy_modify_changed in genphy_config_advert Use phy_modify_changed() to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
efbdfdc2 |
|
09-Feb-2019 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: Add support for asking the PHY its abilities Add support for runtime determination of what the PHY supports, by adding a new function to the phy driver. The get_features call should set the phydev->supported member with the features the PHY supports. It is only called if phydrv->features is NULL. This requires minor changes to pause. The PHY driver should not set pause abilities, except for when it has odd cause capabilities, e.g. pause cannot be disabled. With this change, phydev->supported already contains the drivers abilities, including pause. So rather than considering phydrv->features, look at the phydev->supported, and enable pause if neither of the pause bits are already set. Signed-off-by: Andrew Lunn <andrew@lunn.ch> [hkallweit1@gmail.com: fixed small checkpatch complaint in one comment] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
92ed2eb7 |
|
09-Feb-2019 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: probe the PHY before determining the supported features We will soon support asking the PHY at runtime to determine what features it supports, rather than forcing it to be compile time. But we should probe the PHY first. So probe the phy driver earlier. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
50684da7 |
|
09-Feb-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: remove unneeded masking of PHY register read results PHY registers are only 16 bits wide, therefore, if the read was successful, there's no need to mask out the higher 16 bits. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3b5e74e0 |
|
08-Feb-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: disregard "Clause 22 registers present" bit in get_phy_c45_devs_in_pkg Bit 0 in register 1.5 doesn't represent a device but is a flag that Clause 22 registers are present. Therefore disregard this bit when populating the device list. If code needs this information it should read register 1.5 directly instead of accessing the device list. Because this bit doesn't represent a device don't define a MDIO_MMD_XYZ constant, just define a MDIO_DEVS_XYZ constant for the flag in the device list bitmap. v2: - make masking of bit 0 more explicit - improve commit message Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c397ab21 |
|
07-Feb-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: don't double-read link status register if link is up The link status register latches link-down events. Therefore, if link is reported as being up, there's no need for a second read. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
93c09704 |
|
06-Feb-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: consider latched link-down status in polling mode The link status value latches link-down events. To get the current status we read the register twice in genphy_update_link(). There's a potential risk that we miss a link-down event in polling mode. This may cause issues if the user e.g. connects his machine to a different network. On the other hand reading the latched value may cause issues in interrupt mode. Following scenario: - After boot link goes up - phy_start() is called triggering an aneg restart, hence link goes down and link-down info is latched. - After aneg has finished link goes up and triggers an interrupt. Interrupt handler reads link status, means it reads the latched "link is down" info. But there won't be another interrupt as long as link stays up, therefore phylib will never recognize that link is up. Deal with both scenarios by reading the register twice in interrupt mode only. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
434a4315 |
|
22-Jan-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: change phy_start_interrupts to phy_request_interrupt Now that we enable the interrupts in phy_start() we don't have to do it before. Therefore remove enabling interrupts from phy_start_interrupts() and rename this function to reflect the changed functionality. v2: - improve warning to clearly state that we fall back to polling Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a016becd |
|
22-Jan-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: start state machine in phy_start only The state machine is a no-op before phy_start() has been called. Therefore let's enable it in phy_start() only. In phy_start() let's call phy_start_machine() instead of phy_trigger_machine(). phy_start_machine is an alias for phy_trigger_machine but it makes clearer that we start the state machine here instead of just triggering a run. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a2443fd1 |
|
21-Jan-2019 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: Convert some PHY and MDIO driver files to SPDX headers Where the license text and the MODULE_LICENSE() value agree, convert to using an SPDX header, removing the license text. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a5996989 |
|
19-Jan-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: improve phy_init_hw Currently the soft reset (if defined) is done only if the driver also implements the config_init callback. I think this dependency is a mistake, so let's remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
21e19442 |
|
19-Jan-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: fix issue with loading PHY driver w/o initramfs It was reported that on a system with nfsboot and w/o initramfs network fails because trying to load the PHY driver returns -ENOENT. Reason was that due to missing initramfs the modprobe binary isn't available. So we have to ignore error code -ENOENT. Fixes: 13d0ab6750b2 ("net: phy: check return code when requesting PHY driver module") Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3e64cf7a |
|
17-Jan-2019 |
Camelia Groza <camelia.groza@nxp.com> |
net: phy: phy driver features are mandatory Since phy driver features became a link_mode bitmap, phy drivers that don't have a list of features configured will cause the kernel to crash when probed. Prevent the phy driver from registering if the features field is missing. Fixes: 719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") Reported-by: Scott Wood <oss@buserror.net> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
bb658ab7 |
|
17-Jan-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: remove phy_stop_interrupts Interrupts have been disabled in phy_stop() already. So we can remove phy_stop_interrupts() and free the interrupt in phy_disconnect() directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cbfd12b3 |
|
17-Jan-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: ensure phylib state machine is stopped after calling phy_stop The call to the phylib state machine in phy_stop() just ensures that the state machine isn't re-triggered, but a state machine call may be scheduled already. So lets's call phy_stop_machine(). This also allows to get rid of the call to phy_stop_machine() in phy_disconnect(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
472115d9 |
|
17-Jan-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: stop PHY if needed when entering phy_disconnect Stop PHY if needed when entering phy_disconnect. This allows drivers that don't need a separate call to phy_stop() to omit this call. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d8cce3a1 |
|
16-Jan-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: improve get_phy_id Only caller of get_phy_id() is get_phy_device(). There a PHY ID of 0xffffffff is translated back to -ENODEV. So we can avoid some overhead by returning -ENODEV directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
13d0ab67 |
|
16-Jan-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: check return code when requesting PHY driver module When requesting the PHY driver module fails we'll bind the genphy driver later. This isn't obvious to the user and may cause, depending on the PHY, different types of issues. Therefore check the return code of request_module(). Note that we only check for failures in loading the module, not whether a module exists for the respective PHY ID. v2: - add comment explaining what is checked and what is not - return error from phy_device_create() if loading module fails Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5db5ea99 |
|
15-Jan-2019 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: Add helpers to determine if PHY driver is generic We are already checking in phy_detach() that the PHY driver is of generic kind (1G or 10G) and we are going to make use of that in the SFP layer as well for 1000BaseT SFP modules, so expose helper functions to return that information. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3fcb3f9b |
|
15-Jan-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: don't include asm/irq.h directly There's no need to and one shouldn't include asm/irq.h directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c3a6a174 |
|
15-Jan-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: improve logging in phylib Some time ago phydev_info() and friends have been added. They allow to improve and simplify logging. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1868e3d7 |
|
15-Jan-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: remove preliminary workaround for not loading PHY driver This workaround attempt helped for some but not all affected users. With commit 11287b693d03 ("r8169: load Realtek PHY driver module before r8169") we have a better workaround now, so we an remove the first attempt. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9e857a40 |
|
15-Jan-2019 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: Add missing features to PHY drivers The bcm87xx and micrel driver has PHYs which are missing the .features value. Add them. The bcm87xx is a 10G FEC only PHY. Add the needed features definition of this PHY. Fixes: 719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") Reported-by: Scott Wood <oss@buserror.net> Reported-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8742beb5 |
|
18-Dec-2018 |
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> |
net: phy: Fix the issue that netif always links up after resuming Even though the link is down before entering hibernation, there is an issue that the network interface always links up after resuming from hibernation. If the link is still down before enabling the network interface, and after resuming from hibernation, the phydev->state is forcibly set to PHY_UP in mdio_bus_phy_restore(), and the link becomes up. In suspend sequence, only if the PHY is attached, mdio_bus_phy_suspend() calls phy_stop_machine(), and mdio_bus_phy_resume() calls phy_start_machine(). In resume sequence, it's enough to do the same as mdio_bus_phy_resume() because the state has been preserved. This patch fixes the issue by calling phy_start_machine() in mdio_bus_phy_restore() in the same way as mdio_bus_phy_resume(). Fixes: bc87922ff59d ("phy: Move PHY PM operations into phy_device") Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
935b8a59 |
|
17-Dec-2018 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: remove unused code in phy_probe 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode") left some unused code in phy_probe(), remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d3351931 |
|
05-Dec-2018 |
Andrew Lunn <andrew@lunn.ch> |
net: mii: Add mii_lpa_mod_linkmode_lpa_t Add a _mod_ variant of mii_lpa_to_linkmode_lpa_t. Use this to fix the genphy_read_status() where the 1G link partner features are getting lost. Fixes: c0ec3c273677 ("net: phy: Convert u32 phydev->lp_advertising to linkmode") Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
78a24df3 |
|
05-Dec-2018 |
Andrew Lunn <andrew@lunn.ch> |
net: mii: Rename mii_stat1000_to_linkmode_lpa_t Rename mii_stat1000_to_linkmode_lpa_t to mii_stat1000_mod_linkmode_lpa_t to indicate it modifies the passed linkmode bitmap, without clearing any other bits. Add a helper to set/clear bits in a linkmode. Use this helper to ensure bit are clear which the stat1000 indicates should not be set. Fixes: c0ec3c273677 ("net: phy: Convert u32 phydev->lp_advertising to linkmode") Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7b566f70 |
|
04-Dec-2018 |
David S. Miller <davem@davemloft.net> |
phy: Revert toggling reset changes. This reverts: ef1b5bf506b1 ("net: phy: Fix not to call phy_resume() if PHY is not attached") 8c85f4b81296 ("net: phy: micrel: add toggling phy reset if PHY is not attached") Andrew Lunn informs me that there are alternative efforts underway to fix this more properly. Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
30fcd6a9 |
|
02-Dec-2018 |
Jose Abreu <jose.abreu@synopsys.com> |
net: phy: Also request modules for C45 IDs Logic of phy_device_create() requests PHY modules according to PHY ID but for C45 PHYs we use different field for the IDs. Let's also request the modules for these IDs. Changes from v1: - Only request C22 modules if C45 are not present (Andrew) Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Joao Pinto <joao.pinto@synopsys.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ef1b5bf5 |
|
28-Nov-2018 |
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> |
net: phy: Fix not to call phy_resume() if PHY is not attached This patch fixes an issue that mdio_bus_phy_resume() doesn't call phy_resume() if the PHY is not attached. Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d2a36971 |
|
03-Dec-2018 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: don't allow __set_phy_supported to add unsupported modes Currently __set_phy_supported allows to add modes w/o checking whether the PHY supports them. This is wrong, it should never add modes but only remove modes we don't want to support. The commit marked as fixed didn't do anything wrong, it just copied existing functionality to the helper which is being fixed now. Fixes: f3a6bd393c2c ("phylib: Add phy_set_max_speed helper") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6915bf3b |
|
03-Dec-2018 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: don't allow __set_phy_supported to add unsupported modes Currently __set_phy_supported allows to add modes w/o checking whether the PHY supports them. This is wrong, it should never add modes but only remove modes we don't want to support. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c85ddeca |
|
23-Nov-2018 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: add workaround for issue where PHY driver doesn't bind to the device After switching the r8169 driver to use phylib some user reported that their network is broken. This was caused by the genphy PHY driver being used instead of the dedicated PHY driver for the RTL8211B. Users reported that loading the Realtek PHY driver module upfront fixes the issue. See also this mail thread: https://marc.info/?t=154279781800003&r=1&w=2 The issue is quite weird and the root cause seems to be somewhere in the base driver core. The patch works around the issue and may be removed once the actual issue is fixed. The Fixes tag refers to the first reported occurrence of the issue. The issue itself may have been existing much longer and it may affect users of other network chips as well. Users typically will recognize this issue only if their PHY stops working when being used with the genphy driver. Fixes: f1e911d5d0df ("r8169: add basic phylib support") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a21ff3c8 |
|
12-Nov-2018 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: check for implementation of both callbacks in phy_drv_supports_irq Now that the icplus driver has been fixed all PHY drivers supporting interrupts have both callbacks (config_intr and ack_interrupt) implemented - as it should be. Therefore phy_drv_supports_irq() can be changed now to check for both callbacks being implemented. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c0ec3c27 |
|
10-Nov-2018 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: Convert u32 phydev->lp_advertising to linkmode Convert phy drivers to report the link partner advertised modes using a linkmode bitmap. This allows them to report the higher speeds which don't fit in a u32. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3c1bcc86 |
|
10-Nov-2018 |
Andrew Lunn <andrew@lunn.ch> |
net: ethernet: Convert phydev advertize and supported from u32 to link mode There are a few MAC/PHYs combinations which now support > 1Gbps. These may need to make use of link modes with bits > 31. Thus their supported PHY features or advertised features cannot be implemented using the current bitmap in a u32. Convert to using a linkmode bitmap, which can support all the currently devices link modes, and is future proof as more modes are added. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d73a2156 |
|
09-Nov-2018 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: simplify phy_mac_interrupt and related functions When using phy_mac_interrupt() the irq number is set to PHY_IGNORE_INTERRUPT, therefore phy_interrupt_is_valid() returns false. As a result phy_change() effectively just calls phy_trigger_machine() when called from phy_mac_interrupt() via phy_change_work(). So we can call phy_trigger_machine() from phy_mac_interrupt() directly and remove some now unneeded code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0d2e778e |
|
09-Nov-2018 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt Flag PHY_HAS_INTERRUPT is used only here for this small check. I think using interrupts isn't possible if a driver defines neither config_intr nor ack_interrupts callback. So we can replace checking flag PHY_HAS_INTERRUPT with checking for these callbacks. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
92c9d562 |
|
20-Oct-2018 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: phy_support_sym_pause: Clear Asym Pause When indicating the MAC supports Symmetric Pause, clear the Asymmetric Pause bit, which could of been already set is the PHY supports it. Reported-by: Labbe Corentin <clabbe@baylibre.com> Fixes: c306ad36184f ("net: ethernet: Add helper for MACs which support pause") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
719655a1 |
|
29-Sep-2018 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: Replace phy driver features u32 with link_mode bitmap This is one step in allowing phylib to make use of link_mode bitmaps, instead of u32 for supported and advertised features. Convert the phy drivers to use bitmaps to indicates the features they support. Build bitmap equivalents of the u32 values at runtime, and have the drivers point to the appropriate bitmap. These bitmaps are shared, and we don't want a driver to modify them. So mark them __ro_after_init. Within phylib, the features bitmap is currently turned back into a u32. This will be removed once the whole of phylib, and the drivers are converted to use bitmaps. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c4fabb8b |
|
29-Sep-2018 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: Add phydev_info() Add phydev_info() and make use of it within the phy drivers and core code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
93f41e67 |
|
24-Sep-2018 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: fix WoL handling when suspending the PHY Core of the problem is that phy_suspend() suspends the PHY when it should not because of WoL. phy_suspend() checks for WoL already, but this works only if the PHY driver handles WoL (what is rarely the case). Typically WoL is handled by the MAC driver. This patch uses new member wol_enabled of struct net_device as additional criteria in the check when not to suspend the PHY because of WoL. Last but not least change phy_detach() to call phy_suspend() before attached_dev is set to NULL. phy_suspend() accesses attached_dev when checking whether the MAC driver activated WoL. Fixes: f1e911d5d0df ("r8169: add basic phylib support") Fixes: e8cfd9d6c772 ("net: phy: call state machine synchronously in phy_stop") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d31d1d03 |
|
26-Sep-2018 |
David S. Miller <davem@davemloft.net> |
Revert "net: phy: fix WoL handling when suspending the PHY" This reverts commit e0511f6c1ccdd153cf063764e93ac177a8553c5d. I commited the wrong version of these changes. Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e0511f6c |
|
23-Sep-2018 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: fix WoL handling when suspending the PHY Actually there's nothing wrong with the two changes marked as "Fixes", they just revealed a problem which has been existing before. After having switched r8169 to phylib it was reported that WoL from shutdown doesn't work any longer (WoL from suspend isn't affected). Reason is that during shutdown phy_disconnect()->phy_detach()-> phy_suspend() is called. A similar issue occurs when the phylib state machine calls phy_suspend() when handling state PHY_HALTED. Core of the problem is that phy_suspend() suspends the PHY when it should not due to WoL. phy_suspend() checks for WoL already, but this works only if the PHY driver handles WoL (what is rarely the case). Typically WoL is handled by the MAC driver. phylib knows about this and handles it in mdio_bus_phy_may_suspend(), but that's used only when suspending the system, not in other cases like shutdown. Therefore factor out the relevant check from mdio_bus_phy_may_suspend() to a new function phy_may_suspend() and use it in phy_suspend(). Last but not least change phy_detach() to call phy_suspend() before attached_dev is set to NULL. phy_suspend() accesses attached_dev when checking whether the MAC driver activated WoL. Fixes: f1e911d5d0df ("r8169: add basic phylib support") Fixes: e8cfd9d6c772 ("net: phy: call state machine synchronously in phy_stop") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6e2d85ec |
|
25-Sep-2018 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: Stop with excessive soft reset While consolidating the PHY reset in phy_init_hw() an unconditionaly BMCR soft-reset I became quite trigger happy with those. This was later on deactivated for the Generic PHY driver on the premise that a prior software entity (e.g: bootloader) might have applied workarounds in commit 0878fff1f42c ("net: phy: Do not perform software reset for Generic PHY"). Since we have a hook to wire-up a soft_reset callback, just use that and get rid of the call to genphy_soft_reset() entirely. This speeds up initialization and link establishment for most PHYs out there that do not require a reset. Fixes: 87aa9f9c61ad ("net: phy: consolidate PHY reset in phy_init_hw()") Tested-by: Wang, Dongsheng <dongsheng.wang@hxt-semitech.com> Tested-by: Chris Healy <cphealy@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
22b7d299 |
|
11-Sep-2018 |
Andrew Lunn <andrew@lunn.ch> |
net: ethernet: Add helper to determine if pause configuration is supported Rather than have MAC drivers open code the test, add a helper in phylib. This will help when we change the type of phydev->supported. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0c122405 |
|
11-Sep-2018 |
Andrew Lunn <andrew@lunn.ch> |
net: ethernet: Add helper for set_pauseparam for Pause ethtool can be used to enable/disable pause. Add a helper to configure the PHY when Pause is supported. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
70814e81 |
|
11-Sep-2018 |
Andrew Lunn <andrew@lunn.ch> |
net: ethernet: Add helper for set_pauseparam for Asym Pause ethtool can be used to enable/disable pause. Add a helper to configure the PHY when asym pause is supported. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c306ad36 |
|
11-Sep-2018 |
Andrew Lunn <andrew@lunn.ch> |
net: ethernet: Add helper for MACs which support pause Rather than have the MAC drivers manipulate phydev members, add a helper function for MACs supporting Pause, but not Asym Pause. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
af8d9bb2 |
|
11-Sep-2018 |
Andrew Lunn <andrew@lunn.ch> |
net: ethernet: Add helper for MACs which support asym pause Rather than have the MAC drivers manipulate phydev members to indicate they support Asym Pause, add a helper function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
41124fa6 |
|
11-Sep-2018 |
Andrew Lunn <andrew@lunn.ch> |
net: ethernet: Add helper to remove a supported link mode Some MAC hardware cannot support a subset of link modes. e.g. often 1Gbps Full duplex is supported, but Half duplex is not. Add a helper to remove such a link mode. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b8f8c8eb |
|
21-Jul-2018 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: add GBit master / slave error detection Certain PHY's have issues when operating in GBit slave mode and can be forced to master mode. Examples are RTL8211C, also the Micrel PHY driver has a DT setting to force master mode. If two such chips are link partners the autonegotiation will fail. Standard defines a self-clearing on read, latched-high bit to indicate this error. Check this bit to inform the user. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
df8ed346 |
|
03-Jul-2018 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: fix flag masking in __set_phy_supported Currently also the pause flags are removed from phydev->supported because they're not included in PHY_DEFAULT_FEATURES. I don't think this is intended, especially when considering that this function can be called via phy_set_max_speed() anywhere in a driver. Change the masking to mask out only the values we're going to change. In addition remove the misleading comment, job of this small function is just to adjust the supported and advertised speeds. Fixes: f3a6bd393c2c ("phylib: Add phy_set_max_speed helper") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7f4828ff |
|
02-Jun-2018 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: add struct device_type representation of a PHY A PHY is a type of MDIO device, so let's model it as struct device_type and place PM ops, attribute groups and release callback on device type level. For this the attribute definitions have to be moved. This change allows us to get rid of the PM ops on a bus level in a second step. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
02a6efca |
|
24-Apr-2018 |
Alexandre Belloni <alexandre.belloni@bootlin.com> |
net: phy: allow scanning busses with missing phys Some MDIO busses will error out when trying to read a phy address with no phy present at that address. In that case, probing the bus will fail because __mdiobus_register() is scanning the bus for all possible phys addresses. In case MII_PHYSID1 returns -EIO or -ENODEV, consider there is no phy at this address and set the phy ID to 0xffffffff which is then properly handled in get_phy_device(). Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5df7af85 |
|
19-Mar-2018 |
Kevin Hao <haokexin@gmail.com> |
net: phy: Add general dummy stubs for MMD register access For some phy devices, even though they don't support the MMD extended register access, it does have some side effect if we are trying to read/write the MMD registers via indirect method. So introduce general dummy stubs for MMD register access which these devices can use to avoid such side effect. Fixes: b6b5e8a69118 ("gianfar: Disable EEE autoneg by default") Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4414b3ed |
|
16-Mar-2018 |
Grygorii Strashko <grygorii.strashko@ti.com> |
net: phy: relax error checking when creating sysfs link netdev->phydev Some ethernet drivers (like TI CPSW) may connect and manage >1 Net PHYs per one netdevice, as result such drivers will produce warning during system boot and fail to connect second phy to netdevice when PHYLIB framework will try to create sysfs link netdev->phydev for second PHY in phy_attach_direct(), because sysfs link with the same name has been created already for the first PHY. As result, second CPSW external port will became unusable. Fix it by relaxing error checking when PHYLIB framework is creating sysfs link netdev->phydev in phy_attach_direct(), suppressing warning by using sysfs_create_link_nowarn() and adding error message instead. After this change links (phy->netdev and netdev->phy) creation failure is not fatal any more and system can continue working, which fixes TI CPSW issue. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Fixes: a3995460491d ("net: phy: Relax error checking on sysfs_create_link()") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c69851e9 |
|
11-Mar-2018 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: set link state to down when creating the phy_device Currently the link state is initialized to "up" when the phy_device is being created. This is not consistent with the phy state being initialized to PHY_DOWN. Usually this doen't do any harm because the link state is updated once the PHY reaches state PHY_AN. However e.g. if a LAN port isn't used and the PHY remains down this inconsistency remains and calls to functions like phy_print_status() give false results. Therefore change the initialization to link being down. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9c2c2e62 |
|
26-Feb-2018 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: Restore phy_resume() locking assumption commit f5e64032a799 ("net: phy: fix resume handling") changes the locking semantics for phy_resume() such that the caller now needs to hold the phy mutex. Not all call sites were adopted to this new semantic, resulting in warnings from the added WARN_ON(!mutex_is_locked(&phydev->lock)). Rather than change the semantics, add a __phy_resume() and restore the old behavior of phy_resume(). Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Fixes: f5e64032a799 ("net: phy: fix resume handling") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
18a5b052 |
|
11-Feb-2018 |
Ingo van Lil <inguin@gmx.de> |
net: phy: fix wrong mask to phy_modify() When forcing a specific link mode, the PHY driver must clear the existing speed and duplex bits in BMCR while preserving some other control bits. This logic was accidentally inverted with the introduction of phy_modify(). Fixes: fea23fb591cc ("net: phy: convert read-modify-write to phy_modify()") Signed-off-by: Ingo van Lil <inguin@gmx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
032f4700 |
|
12-Jan-2018 |
Heiner Kallweit <hkallweit1@gmail.com> |
phy: use new helpers phy_set_bits/phy_clear_bits in phylib Use new helpers phy_set_bits / phy_clear_bits in phylib. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f102852f |
|
05-Jan-2018 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: fix wrong masks to phy_modify() The mask argument for phy_modify() in several locations was inverted. Fixes: fea23fb591cc ("net: phy: convert read-modify-write to phy_modify()") Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fea23fb5 |
|
02-Jan-2018 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: convert read-modify-write to phy_modify() Convert read-modify-write sequences in at803x, Marvell and core phylib to use phy_modify() to ensure safety. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f5e64032 |
|
12-Dec-2017 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: fix resume handling When a PHY has the BMCR_PDOWN bit set, it may decide to ignore writes to other registers, or reset the registers to power-on defaults. Micrel PHYs do this for their interrupt registers. The current structure of phylib tries to enable interrupts before resuming (and releasing) the BMCR_PDOWN bit. This fails, causing Micrel PHYs to stop working after a suspend/resume sequence if they are using interrupts. Fix this by ensuring that the PHY driver resume methods do not take the phydev->lock mutex themselves, but the callers of phy_resume() take that lock. This then allows us to move the call to phy_resume() before we enable interrupts in phy_start(). Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a9668491 |
|
11-Dec-2017 |
Richard Leitner <richard.leitner@skidata.com> |
phylib: add reset after clk enable support Some PHYs need the refclk to be a continuous clock. Therefore they don't allow turning it off and on again during operation. Nonetheless such a clock switching is performed by some ETH drivers (namely FEC [1]) for power saving reasons. An example for an affected PHY is the SMSC/Microchip LAN8720 in "REF_CLK In Mode". In order to provide a uniform method to overcome this problem this patch adds a new phy_driver flag (PHY_RST_AFTER_CLK_EN) and corresponding function phy_reset_after_clk_enable() to the phylib. These should be used to trigger reset of the PHY after the refclk is switched on again. [1] commit e8fcfcd5684a ("net: fec: optimize the clock management to save power") Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
bafbdd52 |
|
04-Dec-2017 |
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
phylib: Add device reset GPIO support The PHY devices sometimes do have their reset signal (maybe even power supply?) tied to some GPIO and sometimes it also does happen that a boot loader does not leave it deasserted. So far this issue has been attacked from (as I believe) a wrong angle: by teaching the MAC driver to manipulate the GPIO in question; that solution, when applied to the device trees, led to adding the PHY reset GPIO properties to the MAC device node, with one exception: Cadence MACB driver which could handle the "reset-gpios" prop in a PHY device subnode. I believe that the correct approach is to teach the 'phylib' to get the MDIO device reset GPIO from the device tree node corresponding to this device -- which this patch is doing... Note that I had to modify the AT803x PHY driver as it would stop working otherwise -- it made use of the reset GPIO for its own purposes... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Rob Herring <robh@kernel.org> [geert: Propagate actual errors from fwnode_get_named_gpiod()] [geert: Avoid destroying initial setup] [geert: Consolidate GPIO descriptor acquiring code] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
80274aba |
|
30-Nov-2017 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: remove generic settings for callbacks config_aneg and read_status from drivers Remove generic settings for callbacks config_aneg and read_status from drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
059fbe8b |
|
21-Sep-2017 |
Geert Uytterhoeven <geert+renesas@glider.be> |
net: phy: Fix truncation of large IRQ numbers in phy_attached_print() Given NR_IRQS is 2048 on sparc64, and even 32784 on alpha, 3 digits is not enough to represent interrupt numbers on all architectures. Hence PHY interrupt numbers may be truncated during printing. Increase the buffer size from 4 to 8 bytes to fix this. Fixes: 5e369aefdce4818c ("net: stmmac: Delete dead code for MDIO registration") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5e369aef |
|
04-Sep-2017 |
Romain Perier <romain.perier@collabora.com> |
net: stmmac: Delete dead code for MDIO registration This code is no longer used, the logging function was changed by commit fbca164776e4 ("net: stmmac: Use the right logging function in stmmac_mdio_register"). It was previously showing information about the type of the IRQ, if it's polled, ignored or a normal interrupt. As we don't want information loss, I have moved this code to phy_attached_print(). Fixes: fbca164776e4 ("net: stmmac: Use the right logging function in stmmac_mdio_register") Signed-off-by: Romain Perier <romain.perier@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fcd03e36 |
|
22-Aug-2017 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: Deal with unbound PHY driver in phy_attached_print() Priit reported that stmmac was crashing with the trace below. This is because phy_attached_print() is called too early right after the PHY device has been found, but before it has a driver attached, since that is only done in phy_probe() which occurs later. Fix this by dealing with a possibly NULL phydev->drv point since that can happen here, but could also happen if we voluntarily did an unbind of the PHY device with the PHY driver. sun7i-dwmac 1c50000.ethernet: PTP uses main clock sun7i-dwmac 1c50000.ethernet: no reset control found sun7i-dwmac 1c50000.ethernet: no regulator found sun7i-dwmac 1c50000.ethernet: Ring mode enabled sun7i-dwmac 1c50000.ethernet: DMA HW capability register supported sun7i-dwmac 1c50000.ethernet: Normal descriptors libphy: stmmac: probed Unable to handle kernel NULL pointer dereference at virtual address 00000048 pgd = c0004000 [00000048] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc6-00318-g0065bd7fa384 #1 Hardware name: Allwinner sun7i (A20) Family task: ee868000 task.stack: ee85c000 PC is at phy_attached_print+0x1c/0x8c LR is at stmmac_mdio_register+0x12c/0x200 pc : [<c04510ac>] lr : [<c045e6b4>] psr: 60000013 sp : ee85ddc8 ip : 00000000 fp : c07dfb5c r10: ee981210 r9 : 00000001 r8 : eea73000 r7 : eeaa6dd0 r6 : eeb49800 r5 : 00000000 r4 : 00000000 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : eeb49800 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 4000406a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xee85c210) Stack: (0xee85ddc8 to 0xee85e000) ddc0: 00000000 00000002 eeb49400 eea72000 00000000 eeb49400 dde0: c045e6b4 00000000 ffffffff eeab0810 00000000 c08051f8 ee9292c0 c016d480 de00: eea725c0 eea73000 eea72000 00000001 eea726c0 c0457d0c 00000040 00000020 de20: 00000000 c045b850 00000001 00000000 ee981200 eeab0810 eeaa6ed0 ee981210 de40: 00000000 c094a4a0 00000000 c0465180 eeaa7550 f08d0000 c9ffb90c 00000032 de60: fffffffa 00000032 ee981210 ffffffed c0a46620 fffffdfb c0a46620 c03f7be8 de80: ee981210 c0a9a388 00000000 00000000 c0a46620 c03f63e0 ee981210 c0a46620 dea0: ee981244 00000000 00000007 000000c6 c094a4a0 c03f6534 00000000 c0a46620 dec0: c03f6490 c03f49ec ee828a58 ee9217b4 c0a46620 eeaa4b00 c0a43230 c03f59fc dee0: c08051f8 c094a49c c0a46620 c0a46620 00000000 c091c668 c093783c c03f6dfc df00: ffffe000 00000000 c091c668 c010177c eefe0938 eefe0935 c085e200 000000c6 df20: 00000005 c0136bc8 60000013 c080b3a4 00000006 00000006 c07ce7b4 00000000 df40: c07d7ddc c07cef28 eefe0938 eefe093e c0a0b2f0 c0a641c0 c0a641c0 c0a641c0 df60: c0937834 00000007 000000c6 c094a4a0 00000000 c0900d88 00000006 00000006 df80: 00000000 c09005a8 00000000 c060ecf4 00000000 00000000 00000000 00000000 dfa0: 00000000 c060ecfc 00000000 c0107738 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffdeffff ffffffff [<c04510ac>] (phy_attached_print) from [<c045e6b4>] (stmmac_mdio_register+0x12c/0x200) [<c045e6b4>] (stmmac_mdio_register) from [<c045b850>] (stmmac_dvr_probe+0x850/0x96c) [<c045b850>] (stmmac_dvr_probe) from [<c0465180>] (sun7i_gmac_probe+0x120/0x180) [<c0465180>] (sun7i_gmac_probe) from [<c03f7be8>] (platform_drv_probe+0x50/0xac) [<c03f7be8>] (platform_drv_probe) from [<c03f63e0>] (driver_probe_device+0x234/0x2e4) [<c03f63e0>] (driver_probe_device) from [<c03f6534>] (__driver_attach+0xa4/0xa8) [<c03f6534>] (__driver_attach) from [<c03f49ec>] (bus_for_each_dev+0x4c/0x9c) [<c03f49ec>] (bus_for_each_dev) from [<c03f59fc>] (bus_add_driver+0x190/0x214) [<c03f59fc>] (bus_add_driver) from [<c03f6dfc>] (driver_register+0x78/0xf4) [<c03f6dfc>] (driver_register) from [<c010177c>] (do_one_initcall+0x44/0x168) [<c010177c>] (do_one_initcall) from [<c0900d88>] (kernel_init_freeable+0x144/0x1d0) [<c0900d88>] (kernel_init_freeable) from [<c060ecfc>] (kernel_init+0x8/0x110) [<c060ecfc>] (kernel_init) from [<c0107738>] (ret_from_fork+0x14/0x3c) Code: e59021c8 e59d401c e590302c e3540000 (e5922048) ---[ end trace 39ae87c7923562d0 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Tested-By: Priit Laes <plaes@plaes.org> Fixes: fbca164776e4 ("net: stmmac: Use the right logging function in stmmac_mdio_register") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9525ae83 |
|
25-Jul-2017 |
Russell King <rmk+kernel@arm.linux.org.uk> |
phylink: add phylink infrastructure The link between the ethernet MAC and its PHY has become more complex as the interface evolves. This is especially true with serdes links, where the part of the PHY is effectively integrated into the MAC. Serdes links can be connected to a variety of devices, including SFF modules soldered down onto the board with the MAC, a SFP cage with a hotpluggable SFP module which may contain a PHY or directly modulate the serdes signals onto optical media with or without a PHY, or even a classical PHY connection. Moreover, the negotiation information on serdes links comes in two varieties - SGMII mode, where the PHY provides its speed/duplex/flow control information to the MAC, and 1000base-X mode where both ends exchange their abilities and each resolve the link capabilities. This means we need a more flexible means to support these arrangements, particularly with the hotpluggable nature of SFP, where the PHY can be attached or detached after the network device has been brought up. Ethtool information can come from multiple sources: - we may have a PHY operating in either SGMII or 1000base-X mode, in which case we take ethtool/mii data directly from the PHY. - we may have a optical SFP module without a PHY, with the MAC operating in 1000base-X mode - the ethtool/mii data needs to come from the MAC. - we may have a copper SFP module with a PHY whic can't be accessed, which means we need to take ethtool/mii data from the MAC. Phylink aims to solve this by providing an intermediary between the MAC and PHY, providing a safe way for PHYs to be hotplugged, and allowing a SFP driver to reconfigure the serdes connection. Phylink also takes over support of fixed link connections, where the speed/duplex/flow control are fixed, but link status may be controlled by a GPIO signal. By avoiding the fixed-phy implementation, phylink can provide a faster response to link events: fixed-phy has to wait for phylib to operate its state machine, which can take several seconds. In comparison, phylink takes milliseconds. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> - remove sync status - rework supported and advertisment handling - add 1000base-x speed for fixed links - use functionality exported from phy-core, reworking __phylink_ethtool_ksettings_set for it Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a81497be |
|
25-Jul-2017 |
Russell King <rmk+kernel@arm.linux.org.uk> |
net: phy: provide a hook for link up/link down events Sometimes, we need to do additional work between the PHY coming up and marking the carrier present - for example, we may need to wait for the PHY to MAC link to finish negotiation. This changes phylib to provide a notification function pointer which avoids the built-in netif_carrier_on() and netif_carrier_off() functions. Standard ->adjust_link functionality is provided by hooking a helper into the new ->phy_link_change method. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f0f9b4ed |
|
30-Jun-2017 |
Lin Yun Sheng <linyunsheng@huawei.com> |
net: phy: Add phy loopback support in net phy framework This patch add set_loopback in phy_driver, which is used by MAC driver to enable or disable phy loopback. it also add a generic genphy_loopback function, which use BMCR loopback bit to enable or disable loopback. Signed-off-by: Lin Yun Sheng <linyunsheng@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
921690f2 |
|
04-Jun-2017 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: split out 10G genphy support Move the old 10G genphy support to sit beside the new clause 45 library functions, so all the 10G phy code is together. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5acde34a |
|
04-Jun-2017 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: add 802.3 clause 45 support to phylib Add generic helpers for 802.3 clause 45 PHYs for >= 10Gbps support. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a3995460 |
|
27-May-2017 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: Relax error checking on sysfs_create_link() Some Ethernet drivers will attach/connect to a PHY device before calling register_netdevice() which is responsible for calling netdev_register_kobject() which would do the network device's kobject initialization. In such a case, sysfs_create_link() would return -ENOENT because the network device's kobject is not ready yet, and we would fail to connect to the PHY device. In order to keep things simple and symetrical, we just take the success path as indicative of the ability to access the network device's kobject, and create the second link if that's the case. Fixes: 5568363f0cb3 ("net: phy: Create sysfs reciprocal links for attached_dev/phydev") Reported-by: Woojung Hung <Woojung.Huh@microchip.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5568363f |
|
25-May-2017 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: Create sysfs reciprocal links for attached_dev/phydev There is currently no way for a program scanning /sys to know whether a network device is attached to a particular PHY device, just like the PHY device is not pointed back to its attached network device. Create a symbolic link in the network device's namespace named "phydev" which points to the PHY device and create a symbolic link in the PHY device's namespace named "attached_dev" that points back to the network device. These links are set up during phy_attach_direct() and removed during phy_detach() for symetry. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a0a32d3a |
|
23-May-2017 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
net: phy: put genphy_config_init's EXPORT_SYMBOL directly after the function Commit af6b6967d6e1 ("net: phy: export genphy_config_init()") introduced this EXPORT_SYMBOL and put it after gen10g_soft_reset() instead of directly after genphy_config_init. Probably this happend when the patch was applied because http://patchwork.ozlabs.org/patch/339622/ looks ok. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a6d99fcd |
|
21-Mar-2017 |
Russell King <rmk+kernel@armlinux.org.uk> |
net: phy: switch remaining users to phy_(read|write)_mmd() Switch everyone over to using phy_read_mmd() and phy_write_mmd() now that they are able to handle both Clause 22 indirect addressing and Clause 45 direct addressing methods to the MMD registers. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0878fff1 |
|
05-Mar-2017 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: Do not perform software reset for Generic PHY The Generic PHY driver is a catch-all PHY driver and it should preserve whatever prior initialization has been done by boot loader or firmware agents. For specific PHY device configuration it is expected that a specialized PHY driver would take over that role. Resetting the generic PHY was a bad idea that has lead to several complaints and downstream workarounds e.g: in OpenWrt/LEDE so restore the behavior prior to 87aa9f9c61ad ("net: phy: consolidate PHY reset in phy_init_hw()"). Reported-by: Felix Fietkau <nbd@nbd.name> Fixes: 87aa9f9c61ad ("net: phy: consolidate PHY reset in phy_init_hw()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
25149ef9 |
|
17-Feb-2017 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: Check phydev->drv There are number of function calls, originating from user-space, typically through the Ethernet driver that can make us crash by dereferencing phydev->drv which will be NULL once we unbind the driver from the PHY. There are still functional issues that prevent an unbind then rebind to work, but these will be addressed separately. Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7b9a88a3 |
|
17-Feb-2017 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: Fix PHY unbind crash The PHY library does not deal very well with bind and unbind events. The first thing we would see is that we were not properly canceling the PHY state machine workqueue, so we would be crashing while dereferencing phydev->drv since there is no driver attached anymore. Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6d9f66ac |
|
08-Feb-2017 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: Fix PHY module checks and NULL deref in phy_attach_direct() The Generic PHY drivers gets assigned after we checked that the current PHY driver is NULL, so we need to check a few things before we can safely dereference d->driver. This would be causing a NULL deference to occur when a system binds to the Generic PHY driver. Update phy_attach_direct() to do the following: - grab the driver module reference after we have assigned the Generic PHY drivers accordingly, and remember we came from the generic PHY path - update the error path to clean up the module reference in case the Generic PHY probe function fails - split the error path involving phy_detacht() to avoid double free/put since phy_detach() does all the clean up - finally, have phy_detach() drop the module reference count before we call device_release_driver() for the Generic PHY driver case Fixes: cafe8df8b9bc ("net: phy: Fix lack of reference count on PHY driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cafe8df8 |
|
31-Jan-2017 |
Mao Wenan <maowenan@huawei.com> |
net: phy: Fix lack of reference count on PHY driver There is currently no reference count being held on the PHY driver, which makes it possible to remove the PHY driver module while the PHY state machine is running and polling the PHY. This could cause crashes similar to this one to show up: [ 43.361162] BUG: unable to handle kernel NULL pointer dereference at 0000000000000140 [ 43.361162] IP: phy_state_machine+0x32/0x490 [ 43.361162] PGD 59dc067 [ 43.361162] PUD 0 [ 43.361162] [ 43.361162] Oops: 0000 [#1] SMP [ 43.361162] Modules linked in: dsa_loop [last unloaded: broadcom] [ 43.361162] CPU: 0 PID: 1299 Comm: kworker/0:3 Not tainted 4.10.0-rc5+ #415 [ 43.361162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 43.361162] Workqueue: events_power_efficient phy_state_machine [ 43.361162] task: ffff880006782b80 task.stack: ffffc90000184000 [ 43.361162] RIP: 0010:phy_state_machine+0x32/0x490 [ 43.361162] RSP: 0018:ffffc90000187e18 EFLAGS: 00000246 [ 43.361162] RAX: 0000000000000000 RBX: ffff8800059e53c0 RCX: ffff880006a15c60 [ 43.361162] RDX: ffff880006782b80 RSI: 0000000000000000 RDI: ffff8800059e5428 [ 43.361162] RBP: ffffc90000187e48 R08: ffff880006a15c40 R09: 0000000000000000 [ 43.361162] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800059e5428 [ 43.361162] R13: ffff8800059e5000 R14: 0000000000000000 R15: ffff880006a15c40 [ 43.361162] FS: 0000000000000000(0000) GS:ffff880006a00000(0000) knlGS:0000000000000000 [ 43.361162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 43.361162] CR2: 0000000000000140 CR3: 0000000005979000 CR4: 00000000000006f0 [ 43.361162] Call Trace: [ 43.361162] process_one_work+0x1b4/0x3e0 [ 43.361162] worker_thread+0x43/0x4d0 [ 43.361162] ? __schedule+0x17f/0x4e0 [ 43.361162] kthread+0xf7/0x130 [ 43.361162] ? process_one_work+0x3e0/0x3e0 [ 43.361162] ? kthread_create_on_node+0x40/0x40 [ 43.361162] ret_from_fork+0x29/0x40 [ 43.361162] Code: 56 41 55 41 54 4c 8d 67 68 53 4c 8d af 40 fc ff ff 48 89 fb 4c 89 e7 48 83 ec 08 e8 c9 9d 27 00 48 8b 83 60 ff ff ff 44 8b 73 98 <48> 8b 90 40 01 00 00 44 89 f0 48 85 d2 74 08 4c 89 ef ff d2 8b Keep references on the PHY driver module right before we are going to utilize it in phy_attach_direct(), and conversely when we don't use it anymore in phy_detach(). Signed-off-by: Mao Wenan <maowenan@huawei.com> [florian: rebase, rework commit message] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
57f39862 |
|
19-Dec-2016 |
jbrunet <jbrunet@baylibre.com> |
net: phy: use boolean dt properties for eee broken modes The patches regarding eee-broken-modes was merged before all people involved could find an agreement on the best way to move forward. While we agreed on having a DT property to mark particular modes as broken, the value used for eee-broken-modes mapped the phy register in very direct way. Because of this, the concern is that it could be used to implement configuration policies instead of describing a broken HW. In the end, having a boolean property for each mode seems to be preferred over one bit field value mapping the register (too) directly. Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3bb9ab63 |
|
19-Dec-2016 |
jbrunet <jbrunet@baylibre.com> |
net: phy: fix sign type error in genphy_config_eee_advert In genphy_config_eee_advert, the return value of phy_read_mmd_indirect is checked to know if the register could be accessed but the result is assigned to a 'u32'. Changing to 'int' to correctly get errors from phy_read_mmd_indirect. Fixes: d853d145ea3e ("net: phy: add an option to disable EEE advertisement") Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
529ed127 |
|
07-Dec-2016 |
Timur Tabi <timur@codeaurora.org> |
net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause Instead of having individual PHY drivers set the SUPPORTED_Pause and SUPPORTED_Asym_Pause flags, phylib itself should set those flags, unless there is a hardware erratum or other special case. During autonegotiation, the PHYs will determine whether to enable pause frame support. Pause frames are a feature that is supported by the MAC. It is the MAC that generates the frames and that processes them. The PHY can only be configured to allow them to pass through. This commit also effectively reverts the recently applied c7a61319 ("net: phy: dp83848: Support ethernet pause frames"). So the new process is: 1) Unless the PHY driver overrides it, phylib sets the SUPPORTED_Pause and SUPPORTED_AsymPause bits in phydev->supported. This indicates that the PHY supports pause frames. 2) The MAC driver checks phydev->supported before it calls phy_start(). If (SUPPORTED_Pause | SUPPORTED_AsymPause) is set, then the MAC driver sets those bits in phydev->advertising, if it wants to enable pause frame support. 3) When the link state changes, the MAC driver checks phydev->pause and phydev->asym_pause, If the bits are set, then it enables the corresponding features in the MAC. The algorithm is: if (phydev->pause) The MAC should be programmed to receive and honor pause frames it receives, i.e. enable receive flow control. if (phydev->pause != phydev->asym_pause) The MAC should be programmed to transmit pause frames when needed, i.e. enable transmit flow control. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f38e7a32 |
|
07-Dec-2016 |
Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> |
phy: add phy fixup unregister functions >From : Woojung Huh <woojung.huh@microchip.com> Add functions to unregister phy fixup for modules. int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask) Unregister phy fixup from phy_fixup_list per bus_id, phy_uid & phy_uid_mask int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask) Unregister phy fixup from phy_fixup_list. Use it for fixup registered by phy_register_fixup_for_uid() int phy_unregister_fixup_for_id(const char *bus_id) Unregister phy fixup from phy_fixup_list. Use it for fixup registered by phy_register_fixup_for_id() Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ec988ad7 |
|
06-Dec-2016 |
Florian Fainelli <f.fainelli@gmail.com> |
phy: Don't increment MDIO bus refcount unless it's a different owner Commit 3e3aaf649416 ("phy: fix mdiobus module safety") fixed the way we dealt with MDIO bus module reference count, but sort of introduced a regression in that, if an Ethernet driver registers its own MDIO bus driver, as is common, we will end up with the Ethernet driver's module->refnct set to 1, thus preventing this driver from any removal. Fix this by comparing the network device's device driver owner against the MDIO bus driver owner, and only if they are different, increment the MDIO bus module refcount. Fixes: 3e3aaf649416 ("phy: fix mdiobus module safety") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0075bd69 |
|
28-Nov-2016 |
Geert Uytterhoeven <geert+renesas@glider.be> |
net: phy: Fix use after free in phy_detach() If device_release_driver(&phydev->mdio.dev) is called, it releases all resources belonging to the PHY device. Hence the subsequent call to phy_led_triggers_unregister() will access already freed memory when unregistering the LEDs. Move the call to phy_led_triggers_unregister() before the possible call to device_release_driver() to fix this. Fixes: 2e0bc452f4721520 ("net: phy: leds: add support for led triggers on phy link state change") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d853d145 |
|
28-Nov-2016 |
jbrunet <jbrunet@baylibre.com> |
net: phy: add an option to disable EEE advertisement This patch adds an option to disable EEE advertisement in the generic PHY by providing a mask of prohibited modes corresponding to the value found in the MDIO_AN_EEE_ADV register. On some platforms, PHY Low power idle seems to be causing issues, even breaking the link some cases. The patch provides a convenient way for these platforms to disable EEE advertisement and work around the issue. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Yegor Yefremov <yegorslists@googlemail.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a7dac9f9 |
|
23-Nov-2016 |
Woojung Huh <woojung.huh@microchip.com> |
phy: fix error case of phy_led_triggers_(un)register When phy_init_hw() fails at phy_attach_direct(); - phy_detach() calls phy_led_triggers_unregister() without previous call of phy_led_triggers_register(). - still call phy_led_triggers_register() and cause memory leak. Fixes: 2e0bc452f472 ("net: phy: leds: add support for led triggers on phy link state change") Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
17ae1c65 |
|
03-Nov-2016 |
Johan Hovold <johan@kernel.org> |
phy: fix device reference leaks Make sure to drop the reference taken by bus_find_device_by_name() before returning from phy_connect() and phy_attach(). Note that both function still take a reference to the phy device through phy_attach_direct(). Fixes: e13934563db0 ("[PATCH] PHY Layer fixup") Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2e0bc452 |
|
17-Oct-2016 |
Zach Brown <zach.brown@ni.com> |
net: phy: leds: add support for led triggers on phy link state change Create an option CONFIG_LED_TRIGGER_PHY (default n), which will create a set of led triggers for each instantiated PHY device. There is one LED trigger per link-speed, per-phy. The triggers are registered during phy_attach and unregistered during phy_detach. This allows for a user to configure their system to allow a set of LEDs not controlled by the phy to represent link state changes on the phy. LEDS controlled by the phy are unaffected. For example, we have a board where some of the leds in the RJ45 socket are controlled by the phy, but others are not. Using the triggers provided by this patch the leds not controlled by the phy can be configured to show the current speed of the ethernet connection. The leds controlled by the phy are unaffected. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
664fcf12 |
|
16-Oct-2016 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: Threaded interrupts allow some simplification The PHY interrupts are now handled in a threaded interrupt handler, which can sleep. The work queue is no longer needed, phy_change() can be called directly. phy_mac_interrupt() still needs to be safe to call in interrupt context, so keep the work queue, and use a helper to call phy_change(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
94835014 |
|
18-May-2016 |
Fabio Estevam <fabio.estevam@nxp.com> |
Revert "phy: add support for a reset-gpio specification" Commit da47b4572056 ("phy: add support for a reset-gpio specification") causes the following xtensa qemu crash according to Guenter Roeck: [ 9.366256] libphy: ethoc-mdio: probed [ 9.367389] (null): could not attach to PHY [ 9.368555] (null): failed to probe MDIO bus [ 9.371540] Unable to handle kernel paging request at virtual address 0000001c [ 9.371540] pc = d0320926, ra = 903209d1 [ 9.375358] Oops: sig: 11 [#1] This reverts commit da47b4572056487fd7941c26f73b3e8815ff712a. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
da47b457 |
|
11-May-2016 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
phy: add support for a reset-gpio specification The framework only asserts (for now) that the reset gpio is not active. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b74766a0 |
|
24-Apr-2016 |
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
phylib: don't return NULL from get_phy_device() Arnd Bergmann asked that get_phy_device() returns either NULL or the error value, not both on error. Do as he said, return ERR_PTR(-ENODEV) instead of NULL when the PHY ID registers read as all ones. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f48256ef |
|
14-Apr-2016 |
wangweidong <wangweidong1@huawei.com> |
phy: make some bits preserved while setup forced mode When tested the PHY SGMII Loopback: 1.set the LOOPBACK bit, 2.set the autoneg to AUTONEG_DISABLE, it calls the genphy_setup_forced which will clear the bit. The BMCR_LOOPBACK bit should be preserved. As Florian pointed out that other bits should be preserved too. So I make the BMCR_ISOLATE and BMCR_PDOWN as well. Signed-off-by: Weidong Wang <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cd772de3 |
|
11-Feb-2016 |
Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> |
phy: keep pause flags in phy driver features genphy_config_init() masked out pause flags set in phy driver structure. Pause flags needs to be preserved in phydev->supported & phydev->advertising. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
113c74d8 |
|
14-Jan-2016 |
Sjoerd Simons <sjoerd.simons@collabora.co.uk> |
net: phy: turn carrier off on phy attach The operstate of a networking device initially IF_OPER_UNKNOWN aka "unknown", updated on carrier state changes (with carrier state being on by default). This means it will stay unknown unless the carrier state goes to off at some point, which is not the case if the phy is already up/connected at startup. Explicitly turn off the carrier on phy attach, leaving the phy state machine to turn the carrier on when it has done the initial negotiation. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
47b356e4 |
|
11-Jan-2016 |
Dan Carpenter <dan.carpenter@oracle.com> |
phy: remove an unneeded condition It used to be that bus->irq was a pointer but after e7f4dc3536a4 ('mdio: Move allocation of interrupts into core') it's an array inside the mdio struct, so it can never be NULL. Let's remove the check. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
711fdba3 |
|
06-Jan-2016 |
Andrew Lunn <andrew@lunn.ch> |
mdio: Abstract device_remove() and device_free() Make device_free and device_remove operations in the mdio device structure, so the core code does not need to differentiate between phy devices and generic mdio devices. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a9049e0c |
|
06-Jan-2016 |
Andrew Lunn <andrew@lunn.ch> |
mdio: Add support for mdio drivers. Not all devices on an MDIO bus are PHYs. Meaning not all MDIO drivers are PHY drivers. Add support for generic MDIO drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e76a4957 |
|
06-Jan-2016 |
Andrew Lunn <andrew@lunn.ch> |
phy: Move phy specific bus match into phy_device Matching a driver to a device has both generic parts, and parts which are specific to PHY devices. Move the PHY specific parts into phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
be01da72 |
|
06-Jan-2016 |
Andrew Lunn <andrew@lunn.ch> |
phy: Centralize setting driver module owner Rather than have each driver set the driver owner field, do it once in the core code. This will also help with later changes, when the device structure will move. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
bc87922f |
|
06-Jan-2016 |
Andrew Lunn <andrew@lunn.ch> |
phy: Move PHY PM operations into phy_device The MDIO PM operations are really PHY device PM operations. So move them into phy_device. This will be needed when we support devices on the mdio bus which are not PHYs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5cf11bee |
|
06-Jan-2016 |
Andrew Lunn <andrew@lunn.ch> |
phy_device: Move phy attributes into phy_device The mdio_bus exports three attributes: - PHY ID is the unique 32-bits identifier for a MDIO device implementing standard MII registers MII_PHYSID1/2, which is not guaranteed to be the case for non-standard compliant devices (e.g: Ethernet switches) - PHY interface describes the data-path of the PHY/MDIO device, which is not strictly a PHY thing, but is required and needed for PHY devices to function, a MDIO device could be a control device exclusively - PHY has fixups describes what the PHY driver may have done, so completely PHY specific These are all phy attributes, not generic mdio attributes. So move the attributes into the phy device code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7f854420 |
|
06-Jan-2016 |
Andrew Lunn <andrew@lunn.ch> |
phy: Add API for {un}registering an mdio device to a bus. Rather than have drivers directly manipulate the mii_bus structure, provide and API for registering and unregistering devices on an MDIO bus, and performing lookups. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e5a03bfd |
|
06-Jan-2016 |
Andrew Lunn <andrew@lunn.ch> |
phy: Add an mdio_device structure Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2220943a |
|
06-Jan-2016 |
Andrew Lunn <andrew@lunn.ch> |
phy: Centralise print about attached phy Many Ethernet drivers contain the same netdev_info() print statement about the attached phy. Move it into the phy device code. Additionally add a varargs function which can be used to append additional information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
84eff6d1 |
|
06-Jan-2016 |
Andrew Lunn <andrew@lunn.ch> |
phy: add phydev_name() wrapper Add a phydev_name() function, to help with moving some structure members from phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5f6c99e0 |
|
02-Nov-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net: phy: fix a bug in get_phy_c45_ids When probing devices-in-package for a c45 phy, device zero is the last device to probe, however, if driver reads 0 from device zero, c45_ids->devices_in_package is set to '0', the loop condition of probing will be matched again, see codes below: for (i = 1;i < num_ids && c45_ids->devices_in_package == 0;i++) driver will run in a dead loop. This patch restructures the bug and confusing loop, it provides a helper function get_phy_c45_devs_in_pkg which to read devices-in-package registers of a MMD, and rewrites the loop with using the helper function. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f3a6bd39 |
|
30-Sep-2015 |
Simon Horman <horms+renesas@verge.net.au> |
phylib: Add phy_set_max_speed helper Add a helper to allow ethernet drivers to limit the speed of a phy (that they are attached to). This mainly involves factoring out the business-end of of_set_phy_supported() and exporting a new symbol. This code seems to be open coded in several places, in several different variants. It is is envisaged that this will be used in situations where setting the "max-speed" property in DT is not appropriate, e.g. because the maximum speed is not a property of the phy hardware. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
38737e49 |
|
24-Sep-2015 |
Russell King <rmk+kernel@arm.linux.org.uk> |
phy: add phy_device_remove() Add a phy_device_remove() function to complement phy_device_register(), which undoes the effects of phy_device_register() by removing the phy device from visibility, but not freeing it. This allows these details to be moved out of the mdio bus code into the phy code where this action belongs. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7322967b |
|
24-Sep-2015 |
Russell King <rmk+kernel@arm.linux.org.uk> |
phy: add proper phy struct device refcounting Take a refcount on the phy struct device when the phy device is attached to a network device, and drop it after it's detached. This ensures that a refcount is held on the phy device while the device is being used by a network device, thereby preventing the phy_device from being unexpectedly kfree()'d by phy_device_release(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3e3aaf64 |
|
24-Sep-2015 |
Russell King <rmk+kernel@arm.linux.org.uk> |
phy: fix mdiobus module safety Re-implement the mdiobus module refcounting to ensure that we actually ensure that the mdiobus module code does not go away while we might call into it. The old scheme using bus->dev.driver was buggy, because bus->dev is a class device which never has a struct device_driver associated with it, and hence the associated code trying to obtain a refcount did nothing useful. Instead, take the approach that other subsystems do: pass the module when calling mdiobus_register(), and record that in the mii_bus struct. When we need to increment the module use count in the phy code, use this stored pointer. When the phy is deteched, drop the module refcount, remembering that the phy device might go away at that point. This doesn't stop the mii_bus going away while there are in-use phys - it merely stops the underlying code vanishing. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ef899c07 |
|
28-Aug-2015 |
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
phylib: simplify NULL checks Fix scripts/checkpatch.pl's messages like: CHECK: Comparison to NULL could be written "!phydrv->read_mmd_indirect" BTW, it doesn't detect the reversed comparisons (which I've fixed as well). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d3765f08 |
|
28-Aug-2015 |
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
phylib: simplify bogus phy_device_create() result Get rid of the bogus string of type casts where ERR_PTR() is enough. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8b63ec18 |
|
21-Aug-2015 |
David Daney <david.daney@cavium.com> |
phylib: Make PHYs children of their MDIO bus, not the bus' parent. commit 18ee49ddb0d2 ("phylib: rename mii_bus::dev to mii_bus::parent") changed the parent of PHY devices from the bus to the bus parent. Then, commit 4dea547fef1b ("phylib: rework to prepare for OF registration of PHYs") moved the code into phy_device.c At this point, it is somewhat unclear why the change was seen as necessary. But, when we look at the device model tree in /sys/devices, it is clearly incorrect. The PHYs should be children of their MDIO bus. Change the PHY's parent device to be the MDIO bus device. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
da1da284 |
|
26-Jun-2015 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/phy: tune get_phy_c45_ids to support more c45 phy As some C45 10G PHYs(e.g. Cortina CS4315/CS4340 PHY) have zero Devices In package, current driver can't get correct devices_in_package value by non-zero Devices In package. so let's probe more with zero Devices In package to support more C45 PHYs. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
eb686231 |
|
25-Jun-2015 |
Mugunthan V N <mugunthanvnm@ti.com> |
net: phy: fix phy link up when limiting speed via device tree When limiting phy link speed using "max-speed" to 100mbps or less on a giga bit phy, phy never completes auto negotiation and phy state machine is held in PHY_AN. Fixing this issue by comparing the giga bit advertise though phydev->supported doesn't have it but phy has BMSR_ESTATEN set. So that auto negotiation is restarted as old and new advertise are different and link comes up fine. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8a477a6f |
|
26-Jan-2015 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: keep track of the PHY suspend state In order to avoid double calls to phydev->drv->suspend and resume, keep track of whether the PHY has already been suspended as a consequence of a successful call to phy_suspend(). We will use this in our MDIO bus suspend/resume hooks to avoid a double suspend call. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a7d5f58d |
|
22-Aug-2014 |
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
phylib: use MDIO_DEVS[12] The bare register numbers are used despite <uapi/linux/mdio.h> has MDIO_DEVS[12] #define'd for those. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d92f5dec |
|
28-Jul-2014 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: re-apply PHY fixups during phy_register_device Commit 87aa9f9c61ad ("net: phy: consolidate PHY reset in phy_init_hw()") moved the call to phy_scan_fixups() in phy_init_hw() after a software reset is performed. By the time phy_init_hw() is called in phy_device_register(), no driver has been bound to this PHY yet, so all the checks in phy_init_hw() against the PHY driver and the PHY driver's config_init function will return 0. We will therefore never call phy_scan_fixups() as we should. Fix this by calling phy_scan_fixups() and check for its return value to restore the intended functionality. This broke PHY drivers which do register an early PHY fixup callback to intercept the PHY probing and do things like changing the 32-bits unique PHY identifier when a pseudo-PHY address has been used, as well as board-specific PHY fixups that need to be applied during driver probe time. Reported-by: Hauke Merthens <hauke-m@hauke-m.de> Reported-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b3565f27 |
|
23-Jul-2014 |
Ezequiel Garcia <ezequiel.garcia@free-electrons.com> |
net: phy: Ensure the MDIO bus module is held This commit adds proper module_{get,put} to prevent the MDIO bus module from being unloaded while the phydev is connected. By doing so, we fix a kernel panic produced when a MDIO driver is removed, but the phydev that relies on it is attached and running. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ca127697 |
|
08-Jul-2014 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: export phy_suspend and phy_resume phy_suspend and phy_resume are two commonly used helper functions that need to be exported for Ethernet drivers to be built as modules Fixes: 40755a0fce17 ("net: systemport: add suspend and resume support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
de906af1 |
|
21-May-2014 |
Sascha Hauer <s.hauer@pengutronix.de> |
net: phy: make of_set_phy_supported work with genphy driver of_set_phy_supported allows overwiting hardware capabilities of a phy with values from the devicetree. of_set_phy_supported is called right after phy_device_register in the assumption that phy_probe is called from phy_device_register and the features of the phy are already initialized. For the genphy driver this is not true, here phy_probe is called later during phy_connect time. phy_probe will then overwrite all settings done from of_set_phy_supported Fix this by moving of_set_phy_supported to the core phy code and calling it from phy_probe. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c242a472 |
|
21-May-2014 |
Sascha Hauer <s.hauer@pengutronix.de> |
net: phy: genphy: Allow overwriting features of_set_phy_supported allows overwiting hardware capabilities of a phy with values from the devicetree. This does not work with the genphy driver though because the genphys config_init function will overwrite all values adjusted by of_set_phy_supported. Fix this by initialising the genphy features in the phy_driver struct and in config_init just limit the features to the ones the hardware can actually support. The resulting features are a subset of the devicetree specified features and the hardware features. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b394745d |
|
14-May-2014 |
Guenter Roeck <linux@roeck-us.net> |
net: phy: Don't call phy_resume if phy_init_hw failed After the call to phy_init_hw failed in phy_attach_direct, phy_detach is called to detach the phy device from its network device. If the attached driver is a generic phy driver, this also detaches the driver. Subsequently phy_resume is called, which assumes without checking that a driver is attached to the device. This will result in a crash such as Unable to handle kernel paging request for data at address 0xffffffffffffff90 Faulting instruction address: 0xc0000000003a0e18 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c0000000003a0e18] .phy_attach_direct+0x68/0x17c LR [c0000000003a0e6c] .phy_attach_direct+0xbc/0x17c Call Trace: [c0000003fc0475d0] [c0000000003a0e6c] .phy_attach_direct+0xbc/0x17c (unreliable) [c0000003fc047670] [c0000000003a0ff8] .phy_connect_direct+0x28/0x98 [c0000003fc047700] [c0000000003f0074] .of_phy_connect+0x4c/0xa4 Only call phy_resume if phy_init_hw was successful. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
af6b6967 |
|
16-Apr-2014 |
Daniel Mack <zonque@gmail.com> |
net: phy: export genphy_config_init() This enables other drivers to call this generic implementation, and then only do specific details on top of it. Signed-off-by: Daniel Mack <zonque@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
32fc3fd4 |
|
14-Mar-2014 |
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> |
net: phy: fix uninitalized ethtool_wolinfo in phy_suspend Callers of phy_ethtool_get_wol are supposed to provide a properly cleared struct ethtool_wolinfo. Therefore, fix phy_suspend to clear it before passing it to phy_ethtool_get_wol. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a4572e0c |
|
25-Feb-2014 |
Cristian Bercaru <cristian.bercaru@freescale.com> |
phy: unmask link partner capabilities Masking the link partner's capabilities with local capabilities can be misleading in autonegotiation scenarios such as PAUSE frame autonegotiation. This patch calculates the join between the local capabilities and the link parner capabilities, when it determines the speed and duplex settings, but does not mask any of the link partner capabilities when it calculates PAUSE frame settings. Signed-off-by: Cristian Bercaru <cristian.bercaru@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9df81dd7 |
|
17-Feb-2014 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: allow PHY drivers to implement their own software reset As pointed out by Shaohui, most 10G PHYs out there have a non-standard compliant software reset sequence, eventually something much more complex than just toggling the BMCR_RESET bit. Allow PHY driver to implement their own soft_reset() callback to deal with that. If no callback is provided, call into genphy_soft_reset() which makes sure the existing behavior is kept intact. Reported-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
797ac071 |
|
17-Feb-2014 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: move PHY software reset to genphy_soft_reset As pointed out by Shaohui, this function is generic for 10/100/1000 PHYs, but 10G PHYs might have a slightly different reset sequence which prevents most of them from using this function. Move the BMCR_RESET based software resent sequence to genphy_soft_reset() in preparation for allowing PHY drivers to implement a soft_reset() callback. Reported-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b0ae009f |
|
11-Feb-2014 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: add "has_fixups" boolean property Add a boolean property which indicates if the PHY has had any fixup routine ran on it. We are later going to use that boolean to expose it as a sysfs property to help troubleshooting. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
76a423a3 |
|
11-Feb-2014 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: allow driver to implement their own aneg_done Some PHYs out there can be very quirky with respect to how they would report the auto-negotiation is completed. Allow drivers to override the generic aneg_done() implementation by providing their own. Since not all drivers have been updated yet to use genphy_aneg_done() as aneg_done() callback, we explicitely check that this callback is valid before calling into it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a9fa6e6a |
|
11-Feb-2014 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: add genphy_aneg_done() In preparation for allowing PHY drivers to potentially override their auto-negotiation done callback, move the contents of phy_aneg_done() to genphy_aneg_done() since that function really is the generic implementation based on the BMSR_ANEGCOMPLETE status. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5273e3a5 |
|
03-Feb-2014 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: ensure Gigabit features are masked off if requested When a Gigabit PHY device is connected to a 10/100Mbits capable Ethernet MAC, the driver will restrict the phydev->supported modes to mask off Gigabit. If the Gigabit PHY comes out of reset with the Gigabit features set by default in MII_CTRL1000, it will keep advertising these feature, so by the time we call genphy_config_advert(), the condition on phydev->supported having the Gigabit features on is false, and we do not update MII_CTRL1000 with updated values, and we keep advertising Gigabit features, eventually configuring the PHY for Gigabit whilst the Ethernet MAC does not support that. This patches fixes the problem by ensuring that the Gigabit feature bits are always cleared in MII_CTRL1000, if the PHY happens to be a Gigabit PHY, and then, if Gigabit features are supported, setting those and updating MII_CTRL1000 accordingly. Reported-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
395056ed |
|
19-Jan-2014 |
stephen hemminger <stephen@networkplumber.org> |
phy: cleanup 10g code Code should avoid needless exports, don't export something unless it used. Make local functions static and remove unused stubs. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
257184d7 |
|
09-Jan-2014 |
Andy Fleming <afleming@gmail.com> |
phylib: Support attaching to generic 10g driver phy_attach_direct() may now attach to a generic 10G driver. It can also be used exactly as phy_connect_direct(), which will be useful when using of_mdio, as phy_connect (and therefore of_phy_connect) start the PHY state machine, which is currently irrelevant for 10G PHYs. Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
124059fd |
|
09-Jan-2014 |
Andy Fleming <afleming@gmail.com> |
phylib: Add generic 10G driver Very incomplete, but will allow for binding an ethernet controller to it. Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ab2145ed |
|
09-Jan-2014 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
phylib: turn genphy_driver to an array Then other generic phy driver such as generic 10g phy driver can join it. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fbfcec63 |
|
04-Jan-2014 |
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
phylib: make phy_scan_fixups() static phy_scan_fixups() isn't and shouldn't be called by the drivers directly, so unexport it. And since Florian Fainelli's recent patches, the function is only called locally, so we can make it static as well. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
29935aeb |
|
04-Jan-2014 |
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
phylib: remove unused adjust_state() callback Remove adjust_state() callback from 'struct phy_device' since it seems to have never been really used from the inception: phy_start_machine() has been always called with 2nd argument equal to NULL. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
77051ed8 |
|
04-Jan-2014 |
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
phy: kill excess empty lines Remove excess empty lines such as those between a function call and its result check and just duplicate ones between functions. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
553fe92b |
|
04-Jan-2014 |
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
phy: kill excess code Remove some excess code: - convert assignments to initializers; - kill useless assignments before *return*. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e62a768f |
|
04-Jan-2014 |
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
phy: kill useless local variables A number of functions (especially in phy.c) has local variables that were hardly needed in the first place -- remove them. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2f53e904 |
|
04-Jan-2014 |
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
phy: coding style fixes The recent patch from Florian Fainelli fixed all 'checkpatch.pl' errors but left the numerous warnings: - including <asm/io.h> instead of <linux/io.h>; - including <asm/uaccess.h> instead of <linux/uaccess.h>; - *extern* declaration in .c file; - block comments using empty /* line; - block comments not starting with * on the middle lines; - block comments not having trailing */ on a separate line; - EXPORT_SYMBOL() not immediately following its function; - unnecessary {} for signle statement block; - spaces before tabs. While fixing these, also fix the following style issues (some of which were found running 'checkpatch.pl --strict'): - alignment not matching open paren; - missing {} on one of the *if* arms where another has them; - use of sizeof(struct structure) instead of sizeof(*variable); - multiple assignments on one line; - empty line before }; - file names in the heading comments; - missing spaces around operators; - no {} around multi-line *if* operator's arm; - unneeded () around subexpressions; - incomplete kernel-doc comment style; - comment line exceeding 80 characters; - missing empty line after declarations. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e109374f |
|
17-Dec-2013 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: fix checkpatch errors checkpatch spotted a few checkpatch errors such as whitespace damages and switch/case labels not being on the same column, fix them. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1211ce53 |
|
13-Dec-2013 |
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> |
net: phy: resume/suspend PHYs on attach/detach This ensures PHYs are resumed on attach and suspended on detach. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
481b5d93 |
|
13-Dec-2013 |
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> |
net: phy: provide phy_resume/phy_suspend helpers This adds helper functions to resume and suspend a given phy_device by calling the corresponding driver callbacks if available. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
87aa9f9c |
|
06-Dec-2013 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: consolidate PHY reset in phy_init_hw() There are quite a lot of drivers touching a PHY device MII_BMCR register to reset the PHY without taking care of: 1) ensuring that BMCR_RESET is cleared after a given timeout 2) the PHY state machine resuming to the proper state and re-applying potentially changed settings such as auto-negotiation Introduce phy_poll_reset() which will take care of polling the MII_BMCR for the BMCR_RESET bit to be cleared after a given timeout or return a timeout error code. In order to make sure the PHY is in a correct state, phy_init_hw() first issues a software reset through MII_BMCR and then applies any fixups. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
114002bc |
|
06-Dec-2013 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: report link partner features through ethtool The PHY library already reads the MII_STAT1000 and MII_LPA registers in genphy_read_status(), so extend it to also populate the PHY device link partner advertised features such that we can feed this back into ethtool when asked for it in phy_ethtool_gset(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3fb69bca |
|
20-Nov-2013 |
Madalin Bucur <madalin.bucur@freescale.com> |
net/phy: Add the autocross feature for forced links on VSC82x4 Add auto-MDI/MDI-X capability for forced (autonegotiation disabled) 10/100 Mbps speeds on Vitesse VSC82x4 PHYs. Exported previously static function genphy_setup_forced() required by the new config_aneg handler in the Vitesse PHY module. Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Signed-off-by: Shruti Kanetkar <Shruti@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4284b6a5 |
|
22-May-2013 |
Florian Fainelli <f.fainelli@gmail.com> |
phy: allow drivers to flag a PHY device as internal libphy currently always reports a PHY as an external transceiver from the ethtool output. This is inaccurate, because some drivers should be able to tell that a PHY device is an internal transceiver of an Ethernet MAC. Add a new flag (PHY_IS_INTERNAL) which can be set by PHY drivers just like other flags, and a corresponding helper: phy_is_internal() which can be used by networking drivers to query if a given PHY device is internal. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5ea94e76 |
|
19-May-2013 |
Florian Fainelli <f.fainelli@gmail.com> |
phy: add phy_mac_interrupt() to use with PHY_IGNORE_INTERRUPT There is currently no way for an Ethernet MAC driver servicing PHY link interrupts to notify this to the PHY state machine without defining its own state machine. Since most drivers are not so special, introduce a helper: phy_mac_interrupt() which can be called from a link up/down interrupt routine to update the PHY state machine. To avoid code duplication some refactoring has been done to expose the workqueue and its corresponding callback internally. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2c7b4921 |
|
19-May-2013 |
Florian Fainelli <f.fainelli@gmail.com> |
phy: fix the use of PHY_IGNORE_INTERRUPT When a PHY device is registered with the special IRQ value PHY_IGNORE_INTERRUPT (-2) it will not properly be handled by the PHY library: - it continues to poll its register, while we do not want this because such PHY link events or register changes are serviced by an Ethernet MAC - it will still try to configure PHY interrupts at the PHY level, such interrupts do not exist at the PHY but at the MAC level - the state machine only handles PHY_POLL, but should also handle PHY_IGNORE_INTERRUPT similarly This patch updates the PHY state machine and initialization paths to account for the specific PHY_IGNORE_INTERRUPT. Based on an earlier patch by Thomas Petazzoni, and reworked to add the missing bits. Add a helper phy_interrupt_is_valid() which specifically tests for a PHY interrupt not to be PHY_POLL or PHY_IGNORE_INTERRUPT and use it throughout the code. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b2a43191 |
|
27-Feb-2013 |
Petr Malat <oss@malat.biz> |
phy: Fix phy_device_free memory leak Fix memory leak in phy_device_free() for the case when phy_device* returned by phy_device_create() is not registered in the system. Bug description: phy_device_create() sets name of kobject using dev_set_name(), which allocates memory using kvasprintf(), but this memory isn't freed if the underlying device isn't registered properly, because kobject_cleanup() is not called in that case. This can happen (and actually is happening on our machines) if phy_device_register(), called by mdiobus_scan(), fails. Patch description: Embedded struct device is initialized in phy_device_create() and it counterpart phy_device_free() just drops one reference to the device, which leads to proper deinitialization including releasing the kobject name memory. Signed-off-by: Petr Malat <oss@malat.biz> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f9a8f83b |
|
13-Jan-2013 |
Florian Fainelli <florian@openwrt.org> |
net: phy: remove flags argument from phy_{attach, connect, connect_direct} The flags argument of the phy_{attach,connect,connect_direct} functions is then used to assign a struct phy_device dev_flags with its value. All callers but the tg3 driver pass the flag 0, which results in the underlying PHY drivers in drivers/net/phy/ not being able to actually use any of the flags they would set in dev_flags. This patch gets rid of the flags argument, and passes phydev->dev_flags to the internal PHY library call phy_attach_direct() such that drivers which actually modify a phy device dev_flags get the value preserved for use by the underlying phy driver. Acked-by: Kosta Zertsekel <konszert@marvell.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d5bf9071 |
|
03-Jul-2012 |
Christian Hohnstaedt <chohnstaedt@innominate.com> |
phylib: Support registering a bunch of drivers If registering of one of them fails, all already registered drivers of this module will be unregistered. Use the new register/unregister functions in all drivers registering more than one driver. amd.c, realtek.c: Simplify: directly return registration result. Tested with broadcom.c All others compile-tested. Signed-off-by: Christian Hohnstaedt <chohnstaedt@innominate.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
160c85f0 |
|
27-Jun-2012 |
David S. Miller <davem@davemloft.net> |
phy: Fix warning in get_phy_device(). drivers/net/phy/phy_device.c: In function ‘get_phy_device’: drivers/net/phy/phy_device.c:340:14: warning: ‘phy_id’ may be used uninitialized in this function [-Wmaybe-uninitialized] GCC can't see that when we return zero we always initialize phy_id and that's the only path where we use it. Initialize phy_id to zero to shut it up. Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ac28b9f8 |
|
27-Jun-2012 |
David Daney <david.daney@cavium.com> |
netdev/phy: Handle IEEE802.3 clause 45 Ethernet PHYs The IEEE802.3 clause 45 MDIO bus protocol allows for directly addressing PHY registers using a 21 bit address, and is used by many 10G Ethernet PHYS. Already existing is the ability of MDIO bus drivers to use clause 45, with the MII_ADDR_C45 flag. Here we add struct phy_c45_device_ids to hold the device identifier registers present in clause 45. struct phy_device gets a couple of new fields: c45_ids to hold the identifiers and is_c45 to signal that it is clause 45. get_phy_device() gets a new parameter is_c45 to indicate that the PHY device should use the clause 45 protocol, and its callers are adjusted to pass false. The follow-on patch to of_mdio.c will pass true where appropriate. EXPORT phy_device_create() so that the follow-on patch to of_mdio.c can use it to create phy devices for PHYs, that have non-standard device identifier registers, based on the device tree bindings. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8d242488 |
|
09-Jun-2012 |
Joe Perches <joe@perches.com> |
phy: Use pr_<level> Use a more current logging style. Add pr_fmt and missing newlines. Remove embedded prefixes. Neaten phy_print_status to avoid using KERN_CONT. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
82251de2 |
|
15-May-2012 |
David Daney <david.daney@cavium.com> |
netdev/phy: Make get_phy_id() static and quit EXPORTing it. This function is only referenced from within phy_device.c, so there is no reason to export it. In fact, we can make it static. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f3ff9247 |
|
24-Jan-2012 |
Alan Stern <stern@rowland.harvard.edu> |
Remove useless get_driver()/put_driver() calls As part of the removal of get_driver()/put_driver(), this patch (as1512) gets rid of various useless and unnecessary calls in several drivers. In some cases it may be desirable to pin the driver by calling try_module_get(), but that can be done later. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: "David S. Miller" <davem@davemloft.net> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Michael Buesch <m@bues.ch> CC: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
37f07023 |
|
17-Nov-2011 |
Matt Carlson <mcarlson@broadcom.com> |
net: Change mii to ethtool advertisement function names This patch implements advice by Ben Hutchings to change the mii side of the function names to look more like the register whose values they convert. New LPA translation functions have been added as well. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
28011cf1 |
|
16-Nov-2011 |
Matt Carlson <mcarlson@broadcom.com> |
net: Add ethtool to mii advertisment conversion helpers Translating between ethtool advertisement settings and MII advertisements are common operations for ethernet drivers. This patch adds a set of helper functions that implements the conversion. The patch then modifies a couple of the drivers to use the new functions. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6fe32649 |
|
30-Sep-2011 |
David Daney <david.daney@cavium.com> |
netdev/phy: Use mdiobus_read() so that proper locks are taken. Accesses to the mdio busses must be done with the mdio_lock to ensure proper operation. Conveniently we have the helper function mdiobus_read() to do that for us. Lets use it in get_phy_id() instead of accessing the bus without the lock held. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
25985edc |
|
30-Mar-2011 |
Lucas De Marchi <lucas.demarchi@profusion.mobi> |
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
#
d005a09e |
|
28-Mar-2011 |
Marc Kleine-Budde <mkl@pengutronix.de> |
phylib: phy_attach_direct: phy_init_hw can fail, add cleanup The function phy_attach_direct attaches the phy and calls phy_init_hw. phy_init_hw can fail, but the phy is still marked as attached. Successive calls to phy_attach_direct will fail because the phy is busy. [ 1.020000] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:00, irq=-1) [ 1.030000] eth1: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:01, irq=-1) [ 2.050000] Sending DHCP requests . [ 3.020000] PHY: 1:00 - Link is Up - 100/Full [ 5.110000] ..... timed out! [ 87.660000] IP-Config: Reopening network devices... [ 88.190000] FEC: MDIO read timeout [ 88.190000] eth0: could not attach to PHY [ 88.190000] IP-Config: Failed to open eth0 [ 88.210000] FEC: MDIO read timeout [ 88.210000] eth1: could not attach to PHY [ 88.210000] IP-Config: Failed to open eth1 [ 88.220000] IP-Config: No network devices available. [ 88.220000] Freeing init memory: 6968K [...] starting network interfaces... ip: RTNETLINK answers: File exists [ 94.000000] net eth0: PHY already attached [ 94.010000] eth0: could not attach to PHY ip: SIOCSIFFLAGS: Device or resource busy This patch adds phy_detach to clean up if phy_init_hw fails. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
89ff05ec |
|
21-Oct-2010 |
stephen hemminger <shemminger@vyatta.com> |
phylib: make local function static The following functions are not used directly by any drivers: phy_attach_direct phy_device_create phy_prepare_link genphy_config_advert genphy_setup_forced phy_config_interrupt phy_clear_interrypt phy_sanitize_settings phy_enable_interrupts phy_disable_interrupts Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ef24b16b |
|
24-Aug-2010 |
Anton Vorontsov <avorontsov@mvista.com> |
phylib: Fix race between returning phydev and calling adjust_link It is possible that phylib will call adjust_link before returning from {,of_}phy_connect(), which may cause the following [very rare, though] oops upon reopening the device: Unable to handle kernel paging request for data at address 0x0000024c Oops: Kernel access of bad area, sig: 11 [#1] PREEMPT SMP NR_CPUS=2 LTT NESTING LEVEL : 0 P1021 RDB Modules linked in: NIP: c0345dac LR: c0345dac CTR: c0345d84 TASK = dffab6b0[30] 'events/0' THREAD: c0d24000 CPU: 0 [...] NIP [c0345dac] adjust_link+0x28/0x19c LR [c0345dac] adjust_link+0x28/0x19c Call Trace: [c0d25f00] [000045e1] 0x45e1 (unreliable) [c0d25f30] [c036c158] phy_state_machine+0x3ac/0x554 [...] Here is why. Drivers store phydev in their private structures, e.g. gianfar driver: static int init_phy(struct net_device *dev) { ... priv->phydev = of_phy_connect(...); ... } So that adjust_link could retrieve it back: static void adjust_link(struct net_device *dev) { ... struct phy_device *phydev = priv->phydev; ... } If the device has been opened before, then phydev->state is set to PHY_HALTED (or undefined if the driver didn't call phy_stop()). Now, phy_connect starts the PHY state machine before returning phydev to the driver: phy_start_machine(phydev, NULL); if (phydev->irq > 0) phy_start_interrupts(phydev); return phydev; The time between 'phy_start_machine()' and 'return phydev' is undefined. The start machine routine delays execution for 1 second, which is enough for most cases. But under heavy load, or if you're unlucky, it is quite possible that PHY state machine will execute before phy_connect() returns, and so adjust_link callback will try to dereference phydev, which is not yet ready. To fix the issue, simply initialize the PHY's state to PHY_READY during phy_attach(). This will ensure that phylib won't call adjust_link before phy_start(). Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c1f19b51 |
|
17-Jul-2010 |
Richard Cochran <richardcochran@gmail.com> |
net: support time stamping in phy devices. This patch adds a new networking option to allow hardware time stamps from PHY devices. When enabled, likely candidates among incoming and outgoing network packets are offered to the PHY driver for possible time stamping. When accepted by the PHY driver, incoming packets are deferred for later delivery by the driver. The patch also adds phylib driver methods for the SIOCSHWTSTAMP ioctl and callbacks for transmit and receive time stamping. Drivers may optionally implement these functions. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8626d3b4 |
|
01-Apr-2010 |
David Woodhouse <dwmw2@infradead.org> |
phylib: Support phy module autoloading We don't use the normal hotplug mechanism because it doesn't work. It will load the module some time after the device appears, but that's not good enough for us -- we need the driver loaded _immediately_ because otherwise the NIC driver may just abort and then the phy 'device' goes away. [bwh: s/phy/mdio/ in module alias, kerneldoc for struct mdio_device_id] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f8f76db1 |
|
04-Feb-2010 |
Jiri Pirko <jpirko@redhat.com> |
libphy: add phy_find_first function Many drivers do this in them manually. Now they can use this function. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4f9c85a1 |
|
17-Jan-2010 |
Anton Vorontsov <avorontsov@ru.mvista.com> |
phylib: Move workqueue initialization to a proper place commit 541cd3ee00a4fe975b22fac6a3bc846bacef37f7 ("phylib: Fix deadlock on resume") caused TI DaVinci EMAC ethernet driver to oops upon resume: PM: resume of devices complete after 237.098 msecs Restarting tasks ... done. kernel BUG at kernel/workqueue.c:354! Unable to handle kernel NULL pointer dereference at virtual address 00000000 [...] Backtrace: [<c002c598>] (__bug+0x0/0x2c) from [<c0052a54>] (queue_delayed_work_on+0x74/0xf8) [<c00529e0>] (queue_delayed_work_on+0x0/0xf8) from [<c0052b30>] (queue_delayed_work+0x2c/0x30) The oops pops up because TI DaVinci EMAC driver detaches PHY on suspend and attaches it back on resume. Attaching makes phylib call phy_start_machine() that initializes a workqueue. On the other hand, PHY's resume routine will call phy_start_machine() again, and that will cause the oops since we just destroyed the already scheduled workqueue. This patch fixes the issue by moving workqueue initialization to phy_device_create(). p.s. We don't see this oops with ucc_geth and gianfar drivers because they perform a fine-grained suspend, i.e. they just stop the PHYs without detaching. Reported-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2f5cb434 |
|
30-Dec-2009 |
Anton Vorontsov <avorontsov@ru.mvista.com> |
phylib: Properly reinitialize PHYs after hibernation Since hibernation assumes power loss, we should fully reinitialize PHYs (including platform fixups), as if PHYs were just attached. This patch factors phy_init_hw() out of phy_attach_direct(), then converts mdio_bus to dev_pm_ops and adds an appropriate restore() callback. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
bc23283c |
|
13-Jul-2009 |
Jiri Slaby <jirislaby@kernel.org> |
NET: phy_device, fix lock imbalance Don't forget to unlock a mutex in phy_scan_fixups on a fail path. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1d4ac5d5 |
|
16-Jun-2009 |
Randy Dunlap <randy.dunlap@oracle.com> |
phy_device: fix parameter name in kernel-doc Fix kernel-doc parameter name in phy_device.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fa94f6d9 |
|
24-Apr-2009 |
Grant Likely <grant.likely@secretlab.ca> |
phylib: add *_direct() variants of phy_connect and phy_attach functions Add phy_connect_direct() and phy_attach_direct() functions so that drivers can use a pointer to the phy_device instead of trying to determine the phy's bus_id string. This patch is useful for OF device tree descriptions of phy devices where the driver doesn't need or know what the bus_id value in order to get a phy_device pointer. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4dea547f |
|
24-Apr-2009 |
Grant Likely <grant.likely@secretlab.ca> |
phylib: rework to prepare for OF registration of PHYs This patch makes changes in preparation for supporting open firmware device tree descriptions of MDIO busses. Changes include: - Cleanup handling of phy_map[] entries; they are already NULLed when registering and so don't need to be re-cleared, and it is good practice to clear them out when unregistering. - Split phy_device registration out into a new function so that the OF helpers can do two stage registration (separate allocation and registration steps). Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f0d44ae3 |
|
14-Jan-2009 |
Anton Vorontsov <avorontsov@ru.mvista.com> |
phylib: Fix Freescale TBI PHY detection Freescale on-chip TBI PHYs reports PHY ID as 0x0, but as of commit 3ee82383f0098a2e13acc8cf1be8e47512f41e5a Author: Giulio Benetti <giulio.benetti@micronovasrl.com> Date: Thu Nov 13 21:53:13 2008 +0000 phy: fix phy address bug PHYID returns 0xffff and not 0xffffffff when not found and in some case(at91sam9263) 0x0. Maybe this patch could be useful. phy_device.c treats PHY ID == 0x0 as bogus IDs, and that results in gianfar driver failure to see the TBI PHYs. This code snippet triggers: if (!priv->tbiphy) { printk(KERN_WARNING "SGMII mode requires that the device " "tree specify a tbi-handle\n"); return; } Although tbi-handle is specified in the device tree. Btw, technically PHY ID == 0x0 is a valid ID (if we ever see a PHY manufactured by Xerox :-). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
161c8d2f |
|
25-Dec-2008 |
Krzysztof Halasa <khc@pm.waw.pl> |
net: PHYLIB mdio fixes #2 The PHYLIB mdio code has more problems in error paths: - mdiobus_release can be called before bus->state is set to MDIOBUS_REGISTERED - mdiobus_scan allocates resources which need to be freed - the comment is wrong, the resistors used are actually pull-ups. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f162e97d |
|
16-Dec-2008 |
Andy Fleming <afleming@freescale.com> |
phylib: Remove unnecessary "reset" fixups in genphy_setup_forced genphy_setup_forced hasn't actually reset the PHY for a long time, but a comment to that effect remained in the code, so code continued to act as if it *had* reset the PHY, and called the necessary fixup functions to respond to a PHY reset. With no reset, those functions are no longer needed, so we remove them. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0f0ca340 |
|
28-Nov-2008 |
Giuseppe Cavallaro <peppe.cavallaro@st.com> |
phy: power management support This patch adds the power management support into the physical abstraction layer. Suspend and resume functions respectively turns on/off the bit 11 into the PHY Basic mode control register. Generic PHY device starts supporting PM. In order to support the wake-on LAN and avoid to put in power down the PHY device, the MDIO is aware of what the Ethernet device wants to do. Voluntary, no CONFIG_PM defines were added into the sources. Also generic suspend/resume functions are exported to allow other drivers use them (such as genphy_config_aneg etc.). Within the phy_driver_register function, we need to remove the memset. It overrides the device driver owner and it is not good. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6436cbcd |
|
20-Nov-2008 |
Giuseppe Cavallaro <peppe.cavallaro@st.com> |
phy: fix phy_id detection also for broken hardware. This patch fixes the case when the phy_ids is mostly Fs and in some case 0x0 due to broken hardware. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
de339c2a |
|
19-Nov-2008 |
Trent Piepho <tpiepho@freescale.com> |
phylib: Fix auto-negotiation restart avoidance A previous patch, 51e2a3846eab18711f4eb59cd0a4c33054e2980a, made genphy_config_aneg() not restart aneg by calling genphy_restart_aneg() if the advertisement hadn't changed. But, genphy_restart_aneg() doesn't just restart aneg, it may also *enable* aneg or un-isolate the PHY from the MII (those functions are controlled by the same register). The code to avoid calling genphy_restart_aneg() didn't consider this. So, modify genphy_config_aneg() to also check if the PHY needs to have aneg enabled or be un-isolated before deciding not to restart aneg. This caused a problem with certain Davicom PHYs, as that driver isolates the PHY (why?) before calling genphy_config_aneg() and expects the PHY to be un-isolated by that function. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Reported-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3ee82383 |
|
13-Nov-2008 |
Giulio Benetti <giulio.benetti@micronovasrl.com> |
phy: fix phy address bug PHYID returns 0xffff and not 0xffffffff when not found and in some case(at91sam9263) 0x0. Maybe this patch could be useful. Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fb28ad35 |
|
10-Nov-2008 |
Kay Sievers <kay.sievers@vrfy.org> |
net: struct device - replace bus_id with dev_name(), dev_set_name() Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
26853ab6 |
|
27-Jan-2008 |
Greg Kroah-Hartman <gregkh@suse.de> |
NET: convert the phy_device file to use bus_find_device_by_name The driver core now has this helper function, so might as well use it instead of forcing the phy code to roll their own version. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
892871dc |
|
13-Oct-2008 |
Adrian Bunk <bunk@kernel.org> |
net: export genphy_restart_aneg This patch fixes the following build error caused by commit ed94493fb38a665cebcf750dfabe8a6dd13e136f (mv643xx_eth: convert to phylib): <-- snip --> ... Building modules, stage 2. MODPOST 1280 modules ERROR: "genphy_restart_aneg" [drivers/net/mv643xx_eth.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
51e2a384 |
|
24-Sep-2008 |
Trent Piepho <tpiepho@freescale.com> |
PHY: Avoid unnecessary aneg restarts The PHY's aneg is configured and restarted whenever the link is brought up, e.g. when DHCP is started after the kernel has booted. This can take the link down for several seconds while auto-negotiation is redone. If the advertised features haven't changed, then it shouldn't be necessary to bring down the link and start auto-negotiation over again. genphy_config_advert() is enhanced to return 0 when the advertised features haven't been changed and >0 when they have been. genphy_config_aneg() then uses this information to not call genphy_restart_aneg() if there has been no change. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a01b3d76 |
|
21-May-2008 |
Paul Gortmaker <paul.gortmaker@windriver.com> |
phylib: do EXPORT_SYMBOL on get_phy_id Commit cac1f3c8 factored out the code for get_phy_id so that it could be reused in multiple places. Turns out that some of the users can be modular, so we need to export this symbol as well. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
|
#
5d12b132 |
|
28-Apr-2008 |
Randy Dunlap <randy.dunlap@oracle.com> |
drivers/net/phy: fix kernel-doc notation Fix kernel-doc warning: Warning(linux-2.6.25-git11//drivers/net/phy/phy_device.c:275): No description found for parameter 'bus_id' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
|
#
f62220d3 |
|
18-Apr-2008 |
Andy Fleming <afleming@freescale.com> |
phylib: Add support for board-level PHY fixups Sometimes the specific interaction between the platform and the PHY requires special handling. For instance, to change where the PHY's clock input is, or to add a delay to account for latency issues in the data path. We add a mechanism for registering a callback with the PHY Lib to be called on matching PHYs when they are brought up, or reset. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
|
#
cac1f3c8 |
|
14-Apr-2008 |
Paul Gortmaker <paul.gortmaker@windriver.com> |
phylib: factor out get_phy_id from within get_phy_device We were already doing what amounts to a get_phy_id from within get_phy_device, and rather than duplicate this for the TBIPA probing, we might as well just factor it out and make it available instead. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
|
#
35b5f6b1 |
|
29-Jan-2008 |
Nate Case <ncase@xes-inc.com> |
PHYLIB: Locking fixes for PHY I/O potentially sleeping PHY read/write functions can potentially sleep (e.g., a PHY accessed via I2C). The following changes were made to account for this: * Change spin locks to mutex locks * Add a BUG_ON() to phy_read() phy_write() to warn against calling them from an interrupt context. * Use work queue for PHY state machine handling since it can potentially sleep * Change phydev lock from spinlock to mutex Signed-off-by: Nate Case <ncase@xes-inc.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6f4a7f41 |
|
04-Dec-2007 |
Anton Vorontsov <avorontsov@ru.mvista.com> |
PHY: Add the phy_device_release device method. Lately I've got this nice badness on mdio bus removal: Device 'e0103120:06' does not have a release() function, it is broken and must be fixed. ------------[ cut here ]------------ Badness at drivers/base/core.c:107 NIP: c015c1a8 LR: c015c1a8 CTR: c0157488 REGS: c34bdcf0 TRAP: 0700 Not tainted (2.6.23-rc5-g9ebadfbb-dirty) MSR: 00029032 <EE,ME,IR,DR> CR: 24088422 XER: 00000000 ... [c34bdda0] [c015c1a8] device_release+0x78/0x80 (unreliable) [c34bddb0] [c01354cc] kobject_cleanup+0x80/0xbc [c34bddd0] [c01365f0] kref_put+0x54/0x6c [c34bdde0] [c013543c] kobject_put+0x24/0x34 [c34bddf0] [c015c384] put_device+0x1c/0x2c [c34bde00] [c0180e84] mdiobus_unregister+0x2c/0x58 ... Though actually there is nothing broken, it just device subsystem core expects another "pattern" of resource managment. This patch implement phy device's release function, thus we're getting rid of this badness. Also small hidden bug fixed, hope none other introduced. ;-) Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
#
f2511f13 |
|
04-Nov-2007 |
Olof Johansson <olof@lixom.net> |
phylib: Silence driver registration It gets quite verbose to see every single PHY driver being registered by default. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
#
9ff8c68b |
|
28-Sep-2007 |
Maciej W. Rozycki <macro@linux-mips.org> |
PHYLIB: Spinlock fixes for softirqs Use spin_lock_bh()/spin_unlock_bh() for the phydev lock throughout as it is used in phy_timer() that is called as a softirq and all the other operations may happen in the user context. There has been a change recently that did such a conversion for some of the operations on the lock, but some have been left intact. Many of them, perhaps all, may be called in the user context and I was able to trigger recursive spinlock acquisition indeed, so I think for the sake of long-term maintenance it is best to convert them all, even if unnecessarily for one or two -- better safe than sorry. Perhaps one in phy_timer() could actually be skipped as only called as a softirq -- I can send an update if that sounds like a good idea. Checked with checkpatch.pl and at the runtime. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
#
026d7917 |
|
31-Aug-2007 |
Hans-Jürgen Koch <hjk@linutronix.de> |
Fix a lock problem in generic phy code Lock debugging finds a problem in phy.c and phy_device.c, this patch fixes it. Tested on an AT91SAM9263-EK board, kernel 2.6.23-rc4. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
#
bc1e0a09 |
|
17-Aug-2007 |
Domen Puncer <domen.puncer@telargo.com> |
phy layer: fix genphy_setup_forced (don't reset) Writing BMCR_RESET bit will reset MII_BMCR to default values. This is clearly not what we want. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
#
b3df0da8 |
|
06-Mar-2007 |
Randy Dunlap <randy.dunlap@oracle.com> |
phy layer: add kernel-doc + DocBook Convert function documentation in drivers/net/phy/ to kernel-doc and add it to DocBook. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
#
87aebe07 |
|
09-Apr-2007 |
Greg Kroah-Hartman <gregkh@suse.de> |
PHY: remove rwsem use from phy core The subsystem rwsem is not used by the driver core at all, so the use of it in the phy code doesn't make any sense. They might possibly want to use a local lock, but I am unsure about that. Cc: netdev <netdev@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
cd354f1a |
|
14-Feb-2007 |
Tim Schmielau <tim@physik3.uni-rostock.de> |
[PATCH] remove many unneeded #includes of sched.h After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
1a168934 |
|
05-Feb-2007 |
Randy Dunlap <randy.dunlap@oracle.com> |
phy devices: use same arg types sparse complains about differing types from prototype to definition, so change the u32 to phy_interface_t: drivers/net/phy/phy_device.c:140:19: error: symbol 'phy_connect' redeclared with different type (originally declared at include/linux/phy.h:362) - incompatible argument 5 (different signedness) drivers/net/phy/phy_device.c:190:19: error: symbol 'phy_attach' redeclared with different type (originally declared at include/linux/phy.h:360) - incompatible argument 4 (different signedness) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
#
cd861280 |
|
13-Dec-2006 |
Robert P. J. Day <rpjday@mindspring.com> |
[PATCH] Fix numerous kcalloc() calls, convert to kzalloc() All kcalloc() calls of the form "kcalloc(1,...)" are converted to the equivalent kzalloc() calls, and a few kcalloc() calls with the incorrect ordering of the first two arguments are fixed. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Adam Belay <ambx1@neo.rr.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
e8a2b6a4 |
|
30-Nov-2006 |
Andy Fleming <afleming@freescale.com> |
[PATCH] PHY: Add support for configuring the PHY connection interface Most PHYs connect to an ethernet controller over a GMII or MII interface. However, a growing number are connected over different interfaces, such as RGMII or SGMII. The ethernet driver will tell the PHY what type of connection it is by setting it manually, or passing it in through phy_connect (or phy_attach). Changes include: * Updates to documentation * Updates to PHY Lib consumers * Changes to PHY Lib to add interface support * Some minor changes to whitespace in phy.h * gianfar driver now detects interface and passes appropriate value to PHY Lib Signed-off-by: Andrew Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
#
6b655529 |
|
16-Oct-2006 |
Andy Fleming <afleming@freescale.com> |
[PATCH] Fixed a number of bugs in the PHY Layer * genphy_update_link is now exported * Added a fix from ncase@xes-inc.com which changes forcing so it only updates the link. Otherwise, it never tries the lower values, since it is always overwriting the speed/duplex values with the current ones, rather than the intended ones. * Fixed a bug where bringing up a PHY with no link caused it to timeout, and enter forcing mode. Once in forcing mode, plugging in the link didn't autonegotiate. Now the AN state detects the lack of link, and enters the NO_LINK state. AN only times out if the link is up and AN fails * Cleaned up the PHY_AN case, reducing one level of indentation for the timeout code. Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
#
b7a00ecd |
|
01-Oct-2006 |
Jeff Garzik <jeff@garzik.org> |
[netdrvr] phy: Fix bugs in error handling The recent __must_check stuff flagged some error handling bugs. phy/fixed.c: * handle device_bind_driver() failure phy/phy_device.c: * handle device_bind_driver() failure * release rwsem upon failure Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
#
84c22d79 |
|
25-Sep-2006 |
Eric Sesterhenn <snakebyte@gmx.de> |
[PATCH] Signedness issue in drivers/net/phy/phy_device.c While checking gcc 4.1 -Wextra warnings, I stumbled across the following two warnings: drivers/net/phy/phy_device.c:528: warning: comparison of unsigned expression < 0 is always false drivers/net/phy/phy_device.c:546: warning: comparison of unsigned expression < 0 is always false Since phy_read() returns an integer and can return negative values, it seems to me the best way to get proper error handling working again is to make val an int. Currently it is an u32, so the < 0 check always fails. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
#
11b0bacd |
|
15-Aug-2006 |
Vitaly Bordug <vbordug@ru.mvista.com> |
[PATCH] PAL: Support of the fixed PHY This makes it possible for HW PHY-less boards to utilize PAL goodies. Generic routines to connect to fixed PHY are provided, as well as ability to specify software callback that fills up link, speed, etc. information into PHY descriptor (the latter feature not tested so far). Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
#
6ab3d562 |
|
30-Jun-2006 |
Jörn Engel <joern@wohnheim.fh-wedel.de> |
Remove obsolete #include <linux/config.h> Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
#
afcceaa3 |
|
13-Dec-2005 |
Olaf Hering <olh@suse.de> |
[PATCH] missing license for libphy.ko Andy, libphy has no license tag. Something like the attached (untested!) patch is needed. Hopefully such a change finds its way into 2.6.15. filename: /lib/modules/2.6.15-rc5-3-ppc64/kernel/drivers/net/phy/libphy.ko vermagic: 2.6.15-rc5-3-ppc64 SMP gcc-4.1 depends: srcversion: ACC921B5E82701BE1E6F603 drivers/net/phy/phy_device.c | 4 ++++ 1 files changed, 4 insertions(+) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
|
#
a10b5aac |
|
05-Nov-2005 |
Jeff Garzik <jgarzik@pobox.com> |
Remove linux/version.h include from drivers/net/phy/* and net/ieee80211/*. Unused, and causes the files to be needlessly rebuilt in some cases.
|
#
8cee0cd5 |
|
23-Sep-2005 |
Jeff Garzik <jgarzik@pobox.com> |
[netdrvr] delete CONFIG_PHYCONTROL
|
#
e1393456 |
|
24-Aug-2005 |
Andy Fleming <afleming@freescale.com> |
[PATCH] PHY Layer fixup This patch adds back the code that was taken out, thus re-enabling: * The PHY Layer to initialize without crashing * Drivers to actually connect to PHYs * The entire PHY Control Layer This patch is used by the gianfar driver, and other drivers which are in development. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
|
#
2bf69b5f |
|
11-Aug-2005 |
Jeff Garzik <jgarzik@pobox.com> |
phy subsystem: more cleanups - unexport symbols never used outside of home module - remove dead code - remove CONFIG_PHYCONTROL, make it unconditionally enabled
|
#
67c4f3fa |
|
11-Aug-2005 |
Jeff Garzik <jgarzik@pobox.com> |
Fix numerous minor problems with new phy subsystem. Includes fixes for problems noted by Adrian Bunk, Andrew Morton, and one other person lost in the annals of history (and email folders).
|
#
00db8189 |
|
30-Jul-2005 |
Andy Fleming <afleming@freescale.com> |
This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
|