ethernet: cpts: fix function pointer cast warnings

clang-16 warns about the mismatched prototypes for the devm_* callbacks:

drivers/net/ethernet/ti/cpts.c:691:12: error: cast from 'void (*)(struct clk_hw *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
691 | (void(*)(void *))clk_hw_unregister_mux,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/device.h:406:34: note: expanded from macro 'devm_add_action_or_reset'
406 | __devm_add_action_or_reset(dev, action, data, #action)
| ^~~~~~
drivers/net/ethernet/ti/cpts.c:703:12: error: cast from 'void (*)(struct device_node *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
703 | (void(*)(void *))of_clk_del_provider,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/device.h:406:34: note: expanded from macro 'devm_add_action_or_reset'
406 | __devm_add_action_or_reset(dev, action, data, #action)

Use separate helper functions for this instead, using the expected prototypes
with a void* argument.

Fixes: a3047a81ba13 ("net: ethernet: ti: cpts: add support for ext rftclk selection")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

ptp: cpts: convert .adjfreq to .adjfine

The cpts implementation of .adjfreq is implemented in terms of a
straight forward "base * ppb / 1 billion" calculation.

Convert this to the newer .adjfine, using the recently added
adjust_by_scaled_ppm helper function.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: Handle error for clk_enable

As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.

Fixes: 8a2c9a5ab4b9 ("net: ethernet: ti: cpts: rework initialization/deinitialization")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

ethernet: ti: cpts: Use devm_kcalloc() instead of devm_kzalloc()

Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().

Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20211006181115.GA913499@embeddedor
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ethernet: ti: cpts: fix ethtool output when no ptp_clock registered

The CPTS driver registers PTP PHC clock when first netif is going up and
unregister it when all netif are down. Now ethtool will show:
- PTP PHC clock index 0 after boot until first netif is up;
- the last assigned PTP PHC clock index even if PTP PHC clock is not
registered any more after all netifs are down.

This patch ensures that -1 is returned by ethtool when PTP PHC clock is not
registered any more.

Fixes: 8a2c9a5ab4b9 ("net: ethernet: ti: cpts: rework initialization/deinitialization")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20201224162405.28032-1-grygorii.strashko@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ethernet: ti: cpts: Use generic helper function

In order to reduce code duplication between ptp drivers, generic helper
functions were introduced. Use them.

Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: add support for HW_TS_PUSH events

Hence CPTS IRQ support is in place the W_TS_PUSH events can be added.
PWM capable DmTimers can be used to generete input signals for CPTS on TI
AM335x/AM437x/DRA7 SoCs to be timestamped:
AM335x/AM437x: timer4 - timer7
DRA7/AM57xx: timer13 - timer16

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: add irq support

Add CPTS IRQ support, but do not enable it. By default, the CPTS driver
will continue working using polling mode which is required for CPTS to
continue working on platforms other than CPSW, like Keystone 2.

The CPTS IRQ support is required to enable support for HW_TS_PUSH events.
The CPSW CPTS IRQ and HW_TS_PUSH events support will be enabled in follow
up patches.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: rework locking

Now spinlock is used to synchronize everything which is not required. Add
mutex and use to sync access to PTP interface and PTP worker and use
spinlock only to sync FIFO/events processing.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: move tx timestamp processing to ptp worker only

Now the tx timestamp processing happens from different contexts - softirq
and thread/PTP worker. Enabling IRQ will add one more hard_irq context.
This makes over all defered TX timestamp processing and locking
overcomplicated. Move tx timestamp processing to PTP worker always instead.

napi_rx->cpts_tx_timestamp
if ptp_packet then
push to txq
ptp_schedule_worker()

do_aux_work->cpts_overflow_check
cpts_process_events()

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: optimize packet to event matching

Now the CPTS driver performs packet (skb) parsing every time when it needs
to match packet to CPTS event (including ptp_classify_raw() calls).

This patch optimizes matching process by parsing packet only once upon
arrival and stores PTP specific data in skb->cb using the same fromat as in
CPTS HW event. As result, all future matching reduces to comparing two u32
values.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: switch to use new .gettimex64() interface

The CPTS HW latches and saves CPTS counter value in CPTS fifo immediately
after writing to CPSW_CPTS_PUSH.TS_PUSH (bit 0), so the total time that the
driver needs to read the CPTS timestamp is the time required CPSW_CPTS_PUSH
write to actually reach HW.

Hence switch CPTS driver to implement new .gettimex64() callback for more
precise measurement of the offset between a PHC and the system clock which
is measured as time between
write(CPSW_CPTS_PUSH)
read(CPSW_CPTS_PUSH)

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: move tc mult update in cpts_fifo_read()

Now CPTS driver .adjfreq() generates request to read CPTS current time
(CPTS_EV_PUSH) with intention to process all pending event using previous
frequency adjustment values before switching to the new ones. So
CPTS_EV_PUSH works as a marker to switch to the new frequency adjustment
values. Current code assumes that all job is done in .adjfreq(), but after
enabling IRQ this will not be true any more.

Hence save new frequency adjustment values (mult) and perform actual freq
adjustment in cpts_fifo_read() immediately after CPTS_EV_PUSH is received.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: separate hw counter read from timecounter

Now CPTS HW time reading code is implemented in timecounter->cyclecounter
.read() callback and performs following operations:
timecounter_read() ->cc.read() -> cpts_systim_read()
- request current CPTS HW time CPTS_TS_PUSH.TS_PUSH = 1
- poll CPTS FIFO for CPTS_EV_PUSH event with current HW timestamp

This approach need to be changed for the future switch to PTP PHC
.gettimex64() callback, which require to separate requesting current CPTS
HW time and processing CPTS FIFO. And for the follow up patch, which
improves .adjfreq() implementation.

This patch moves code accessing CPTS HW out of timecounter code as
following:
- convert HW timestamp of every CPTS event to PTP time (us) and store it as
part struct cpts_event;
- add CPTS context field to store current CPTS HW time (counter) value and
update it on CPTS_EV_PUSH reception;
- move code accessing CPTS HW out of timecounter code and use current CPTS
HW time (counter) from CPTS context instead;
- ensure timecounter->cycle_last is updated on CPTS_EV_PUSH reception.

After this change CPTS timecounter will only perform timekeeper role
without actually accessing CPTS HW.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: use dev_yy() api for logs

Use dev_yy() API instead of pr_yy() for log outputs.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ethernet: ti: cpts: use ktime_get_real_ns helper

Update on more short variant for getting real clock in ns.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: add support for ext rftclk selection

Some CPTS instances, which can be found on KeyStone 2 1G Ethernet Switch
Subsystems, can control an external multiplexer that selects one of up to
32 clocks as time sync reference (RFTCLK) clock. This feature can be
configured through CPTS_RFTCLK_SEL register (offset: x08) in CPTS module
and can be represented as multiplexer clock.

Hence, introduce support for optional cpts-refclk-mux clock, which, once
defined will allow to select required CPTS RFTCLK by using
assigned-clock-parents DT property in board files.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: use devm_get_clk_from_child

Use devm_get_clk_from_child() instead of devm_clk_get() and this way allow
to group CPTS DT properties in sub-node for better code readability and
maintenance. Roll-back to devm_clk_get() if devm_get_clk_from_child()
fails for backward compatibility.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: convert to SPDX license identifiers

Replace textual license with SPDX-License-Identifier.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: (cpts) fix a missing check of clk_prepare

clk_prepare() could fail, so let's check its status, and if it fails,
return its error code upstream.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: move enable/disable flags outside of cpts module

Each slave has it's own receive timestamp filter. But cpts rx/tx
timestamp enable flags are used to allow ts retrieve only for one
user. This limitation causes data path redundancy and setting overlap
if cpsw module is in dual-mac mode for instance.

If rx ts is enabled only for one port - the second interface must expect
every incoming packet to be PTP packet w/o absolutely any reason, and if
it's PTP - do unneeded stuff, as rx filter for second port is not set
and cpts fifo is not supposed to contain appropriate ts event.
That's not correct.

So, to fix control overlap and avoid redundant CPU cycles, the patch
splits rx/tx ts enable flags between network devices. After the patch,
PTP timestamping still should be used for only one port (or PTP id
counter has to be different for both ports as cpts IP is common).

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: purge staled skbs from txq

The overflow event is running with 1 jiffy in case if txq is not
empty, but it can be emptied completely only if next tx event
consumes skb or deletes staled skb from the txq. In case of staled
skb, that can happen for some unpredictable reason (the ts event was
lost or timed out), the overflow event can be generated quite long
time consuming CPU w/o reason before next tx event happens. To avoid
it, purge txq before increasing overflow event rate.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: correct debug for expired txq skb

The msgtype and seqid that is smth that belongs to event for
comparison but not for staled txq skb.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: mark expected switch fall-through

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 114813 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: break cycle once late ts is matched

The late ts queue can contain a bunch of skbs while hi rate testing,
no need to check all of them if timestamp is already matched.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: Fix timestamp print

On 64-bit hosts we will get the following warning:

drivers/net/ethernet/ti/cpts.c: In function 'cpts_overflow_check':
drivers/net/ethernet/ti/cpts.c:297:11: warning: format '%lld' expects
argument of type 'long long int', but argument 3 has type
'__kernel_time_t {aka long int}' [-Wformat=]
pr_debug("cpts overflow check at %lld.%09lu\n", ts.tv_sec,
ts.tv_nsec);

Fix this by using an appropriate casting that works on all bit sizes.

Fixes: a5c79c26e168 ("ptp: cpts: convert to the 64 bit get/set time methods.")
Fixes: 87c0e764d43a ("cpts: introduce time stamping code and a PTP hardware clock.")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: Use ERR_CAST instead of ERR_PTR(PTR_ERR())

Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)).

drivers/net/ethernet/ti/cpts.c:567:9-16: WARNING: ERR_CAST can be used with cpts->refclk
Generated by: scripts/coccinelle/api/err_cast.cocci

Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: make ptp_clock_info const

Make these const as they are only used in a copy operation.
Done using Coccinelle.

@match disable optional_qualifier@
identifier s;
@@
static struct ptp_clock_info s = {...};

@ref@
position p;
identifier match.s;
@@
s@p

@good1@
position ref.p;
identifier match.s,f,c;
expression e;
@@
(
e = s@p
|
e = s@p.f
|
c(...,s@p.f,...)
|
c(...,s@p,...)
)

@bad depends on !good1@
position ref.p;
identifier match.s;
@@
s@p

@depends on forall !bad disable optional_qualifier@
identifier match.s;
@@
static
+ const
struct ptp_clock_info s;

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: fix fifo read in cpts_find_ts

Now the call chain
cpts_find_ts()
|- cpts_fifo_read(cpts, CPTS_EV_PUSH)

will stop reading CPTS FIFO if PUSH event is found. But this is not
expected and CPTS FIFI should be completely drained here. This is most
probably copy-paste error and it has no negative impact as CPTS_EV_PUSH
should not be present in FIFO without TS_PUSH request and
cpts_systim_read() and cpts_find_ts() synchronized by spin_lock.

Correct above by calling cpts_fifo_read() with -1 parameter, so it will
read all CPTS event from FIFO.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: fix tx timestamping timeout

With the low speed Ethernet connection CPDMA notification about packet
processing can be received before CPTS TX timestamp event, which is set
when packet actually left CPSW while cpdma notification is sent when packet
pushed in CPSW fifo. As result, when connection is slow and CPU is fast
enough TX timestamping is not working properly.

Fix it, by introducing TX SKB queue to store PTP SKBs for which Ethernet
Transmit Event hasn't been received yet and then re-check this queue
with new Ethernet Transmit Events by scheduling CPTS overflow
work more often (every 1 jiffies) until TX SKB queue is not empty.

Side effect of this change is:
- User space tools require to take into account possible delay in TX
timestamp processing (for example ptp4l works with tx_timestamp_timeout=400
under net traffic and tx_timestamp_timeout=25 in idle).

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: convert to use ptp auxiliary worker

There could be significant delay in CPTS work schedule under high system
load and on -RT which could cause CPTS misbehavior due to internal counter
overflow. Usage of own kthread_worker allows to avoid such kind of issues
and makes it possible to tune priority of CPTS kthread_worker thread on -RT
(thread name "cpts").

Hence, the CPTS driver is converted to use PTP auxiliary worker as PHC
subsystem implements such functionality in a generic way now.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

clocksource: Use a plain u64 instead of cycle_t

There is no point in having an extra type for extra confusion. u64 is
unambiguous.

Conversion was done with the following coccinelle script:

@rem@
@@
-typedef u64 cycle_t;

@fix@
typedef cycle_t;
@@
-cycle_t
+u64

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>

net: ethernet: ti: cpts: fix overflow check period

The CPTS drivers uses 8sec period for overflow checking with
assumption that CPTS retclk will not exceed 500MHz. But that's not
true on some TI platforms (Kesytone 2). As result, it is possible that
CPTS counter will overflow more than once between two readings.

Hence, fix it by selecting overflow check period dynamically as
max_sec_before_overflow/2, where
max_sec_before_overflow = max_counter_val / rftclk_freq.

Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: calc mult and shift from refclk freq

The cyclecounter mult and shift values can be calculated based on the
CPTS rfclk frequency and timekeepnig framework provides required algos
and API's.

Hence, calc mult and shift basing on CPTS rfclk frequency if both
cpts_clock_shift and cpts_clock_mult properties are not provided in DT (the
basis of calculation algorithm is borrowed from
__clocksource_update_freq_scale() commit 7d2f944a2b83 ("clocksource:
Provide a generic mult/shift factor calculation")). After this change
cpts_clock_shift and cpts_clock_mult DT properties will become optional.

Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: move dt props parsing to cpts driver

Move DT properties parsing into CPTS driver to simplify CPSW
code and CPTS driver porting on other SoC in the future
(like Keystone 2) - with this change it will not be required
to add the same DT parsing code in Keystone 2 NETCP driver.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: rework initialization/deinitialization

The current implementation CPTS initialization and deinitialization
(represented by cpts_register/unregister()) does too many static
initialization from .ndo_open(), which is reasonable to do once at probe
time instead, and also require caller to allocate memory for struct cpts,
which is internal for CPTS driver in general.

This patch splits CPTS initialization and deinitialization on two parts:

- static initializtion cpts_create()/cpts_release() which expected to be
executed when parent driver is probed/removed;

- dynamic part cpts_register/unregister() which expected to be executed
when network device is opened/closed.

As result, current code of CPTS parent driver - CPSW - will be simplified
(and it also will allow simplify adding support for Keystone 2 devices in
the future), plus more initialization errors will be catched earlier. In
addition, this change allows to clean up cpts.h for the case when CPTS is
disabled.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: drop excessive writes to CTRL and INT_EN regs

CPTS module and IRQs are always enabled when CPTS is registered,
before starting overflow check work, and disabled during
deregistration, when overflow check work has been canceled already.
So, It doesn't require to (re)enable CPTS module and IRQs in
cpts_overflow_check().

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: clean up event list if event pool is empty

When a CPTS user does not exit gracefully by disabling cpts
timestamping and leaving a joined multicast group, the system
continues to receive and timestamps the ptp packets which eventually
occupy all the event list entries. When this happns, the added code
tries to remove some list entries which are expired.

Signed-off-by: WingMan Kwok <w-kwok2@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: disable cpts when unregistered

The cpts now is left enabled after unregistration.
Hence, disable it in cpts_unregister().

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: fix registration order

The ptp clock registered before spinlock, which is protecting it, and
before timecounter and cyclecounter initialization in cpts_register().

So, ensure that ptp clock is registered the last, after everything
else is done.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: fix unbalanced clk api usage in cpts_register/unregister

There are two issues with TI CPTS code which are reproducible when TI
CPSW ethX device passes few up/down iterations:
- cpts refclk prepare counter continuously incremented after each
up/down iteration;
- devm_clk_get(dev, "cpts") is called many times.

Hence, fix these issues by using clk_disable_unprepare() in
cpts_clk_release() and skipping devm_clk_get() if cpts refclk has been
acquired already.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: allow cpts to be built separately

TI CPTS IP is used as part of TI OMAP CPSW driver, but it's also
present as part of NETCP on TI Keystone 2 SoCs. So, It's required
to enable build of CPTS for both this drivers and this can be
achieved by allowing CPTS to be built separately.

Hence, allow cpts to be built separately and convert it to be
a module as both CPSW and NETCP drives can be built as modules.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpts: switch to readl/writel_relaxed()

Switch to readl/writel_relaxed() APIs, because this is recommended
API and the CPTS IP is reused on Keystone 2 SoCs
where LE/BE modes are supported.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ptp: cpts: use helpers for converting ns to timespec.

This patch changes the driver to use ns_to_timespec64() and
timespec64_to_ns() instead of open coding the same logic.

Compile tested only.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ptp: cpts: convert to the 64 bit get/set time methods.

This driver's clock is implemented using a timecounter, and so with
this patch the driver is ready for the year 2038.

Compile tested only.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: cpts: convert to timecounter adjtime.

This patch changes the driver to use the new and improved method
for adjusting the offset of a timecounter.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ptp: fix time stamp matching logic for VLAN packets.

Commit ae5c6c6d "ptp: Classify ptp over ip over vlan packets" changed the
code in two drivers that matches time stamps with PTP frames, with the goal
of allowing VLAN tagged PTP packets to receive hardware time stamps.

However, that commit failed to account for the VLAN header when parsing
IPv4 packets. This patch fixes those two drivers to correctly match VLAN
tagged IPv4/UDP PTP messages with their time stamps.

This patch should also be applied to v3.17.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ptp: Classify ptp over ip over vlan packets

This extends the ptp bpf to also match ptp over ip over vlan packets. The ptp
classes are changed to orthogonal bitfields representing version, transport
and vlan values to simplify matching.

Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers: net: cpts: Remove hardcoded clock name for CPTS

CPTS refclk name is hardcoded, which makes it fail in case of DRA7x
Remove the hardcoded clock name for CPTS refclk and get the same from DT.

Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ti: fix CPTS driver build on arm

fix build errors:
drivers/net/ethernet/ti/cpts.c:266:12: error: 'ETH_HLEN' undeclared (first use in this function)
drivers/net/ethernet/ti/cpts.c:276:23: error: 'VLAN_HLEN' undeclared (first use in this function)

Fixes: 408eccce3204 ("net: ptp: move PTP classifier in its own file")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Suggested-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ptp: do not reimplement PTP/BPF classifier

There are currently pch_gbe, cpts, and ixp4xx_eth drivers that open-code
and reimplement a BPF classifier for the PTP protocol. Since all of them
effectively do the very same thing and load the very same PTP/BPF filter,
we can just consolidate that code by introducing ptp_classify_raw() in
the time-stamping core framework which can be used in drivers.

As drivers get initialized after bootstrapping the core networking
subsystem, they can make use of ptp_insns wrapped through
ptp_classify_raw(), which allows to simplify and remove PTP classifier
setup code in drivers.

Joint work with Alexei Starovoitov.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Richard Cochran <richard.cochran@omicron.at>
Cc: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ptp: drivers: set the number of programmable pins.

This patch updates the many PTP Hardware Clock drivers with the
newly introduced field that advertises the number of programmable
pins. Some of these devices do have programmable pins, but the
implementation will have to wait for follow on patches.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

treewide: Fix typos in printk

Correct spelling typo in various drivers.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

cpts: fix a run time warn_on.

This patch fixes a warning in clk_enable by calling clk_prepare_enable
instead.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cpts: fix build error by removing useless code.

The cpts driver tries to obtain the input clock frequency by calling the
clock's internal 'recalc' method. Since <plat/clock.h> has been removed,
this code can no longer compile.

However, the driver never makes use of the frequency value, so this patch
fixes the issue by removing the offending code altogether.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cpts: Fix build error caused by include of plat/clock.h

Commit 87c0e764 (cpts: introduce time stamping code and a PTP hardware clock)
mistakenly included plat/clock.h that should not be included by drivers
even if it exists.

Otherwise we get the following error with at least omap2plus_defconfig:

drivers/net/ethernet/ti/cpts.c:30:24: error: plat/clock.h: No such file or directory

Signed-off-by: Tony Lindgren <tony@atomide.com
Signed-off-by: David S. Miller <davem@davemloft.net>

cpts: introduce time stamping code and a PTP hardware clock.

This patch adds a driver for the CPTS that offers time
stamping and a PTP hardware clock. Because some of the
CPTS hardware variants (like the am335x) do not support
frequency adjustment, we have implemented this in software
by changing the multiplication factor of the timecounter.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>