#
a29689e6 |
|
05-Apr-2024 |
Niklas Schnelle <schnelle@linux.ibm.com> |
net: handle HAS_IOPORT dependencies In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at compile time. We thus need to add HAS_IOPORT as dependency for those drivers requiring them. For the DEFXX driver the use of I/O ports is optional and we only need to fence specific code paths. It also turns out that with HAS_IOPORT handled explicitly HAMRADIO does not need the !S390 dependency and successfully builds the bpqether driver. Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Maciej W. Rozycki <macro@orcam.me.uk> Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a2fd0844 |
|
17-Oct-2022 |
Arnd Bergmann <arnd@arndb.de> |
net: remove smc911x driver This driver was used on Arm and SH machines until 2009, when the last platforms moved to the smsc911x driver for the same hardware. Time to retire this version. Link: https://lore.kernel.org/netdev/1232010482-3744-1-git-send-email-steve.glendinning@smsc.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20221017121900.3520108-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
1c4b5ecb |
|
23-Feb-2022 |
Christoph Hellwig <hch@lst.de> |
remove the h8300 architecture Signed-off-by: Christoph Hellwig <hch@lst.de>
|
#
4228c394 |
|
03-Aug-2021 |
Arnd Bergmann <arnd@arndb.de> |
make legacy ISA probe optional There are very few ISA drivers left that rely on the static probing from drivers/net/Space.o. Make them all select a new CONFIG_NETDEV_LEGACY_INIT symbol, and drop the entire probe logic when that is disabled. The 9 drivers that are called from Space.c are the same set that calls netdev_boot_setup_check(). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7958ba7e |
|
09-Nov-2020 |
Andrew Lunn <andrew@lunn.ch> |
drivers: net: smsc: Add COMPILE_TEST support Improve the build testing of these SMSC drivers by enabling them when COMPILE_TEST is selected. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
132db935 |
|
26-Jun-2020 |
Jakub Kicinski <kuba@kernel.org> |
docs: networking: reorganize driver documentation again Organize driver documentation by device type. Most documents have fairly verbose yet uninformative names, so let users first select a well defined device type, and then search for a particular driver. While at it rename the section from Vendor drivers to Hardware drivers. This seems more accurate, besides people sometimes refer to out-of-tree drivers as vendor drivers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a7f7f624 |
|
13-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: replace '---help---' in Kconfig files with 'help' Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
d6a99873 |
|
01-May-2020 |
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
docs: networking: device drivers: convert smsc/smc9.txt to ReST - add SPDX header; - mark code blocks and literals as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cd238eff |
|
12-Jun-2019 |
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> |
docs: kbuild: convert docs to ReST and rename to *.rst The kbuild documentation clearly shows that the documents there are written at different times: some use markdown, some use their own peculiar logic to split sections. Convert everything to ReST without affecting too much the author's style and avoiding adding uneeded markups. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
#
ec8f24b7 |
|
19-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
b255e500 |
|
03-Dec-2018 |
Jakub Kicinski <kuba@kernel.org> |
net: documentation: build a directory structure for drivers Documentation/networking/ is full of cryptically named files with driver documentation. This makes finding interesting information at a glance really hard. Move all those files into a directory called device_drivers (since not all drivers are for device) and fix up references. RFC v0.1 -> RFC v1: - also add .txt suffix to the files which are missing it (Quentin) Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Henrik Austad <henrik@austad.us> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d98983fb |
|
09-Mar-2018 |
Arnd Bergmann <arnd@arndb.de> |
net: smsc: remove m32r/mn10300 specific smc91x configuration The m32r and mn10300 architectures are getting removed, so this part can be cleaned up as well. Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
#
a687a533 |
|
07-Mar-2018 |
Arnd Bergmann <arnd@arndb.de> |
treewide: simplify Kconfig dependencies for removed archs A lot of Kconfig symbols have architecture specific dependencies. In those cases that depend on architectures we have already removed, they can be omitted. Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
#
739d875d |
|
08-Mar-2018 |
David Howells <dhowells@redhat.com> |
mn10300: Remove the architecture Remove the MN10300 arch as the hardware is defunct. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com> cc: Masahiro Yamada <yamada.masahiro@socionext.com> cc: linux-am33-list@redhat.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
#
83090e7d |
|
21-Feb-2018 |
Finn Thain <fthain@telegraphics.com.au> |
net/smc9194: Remove bogus CONFIG_MAC reference AFAIK the only version of smc9194.c with Mac support is the one in the linux-mac68k CVS repo, which never made it to the mainline. Despite that, from v2.3.45, arch/m68k/config.in listed CONFIG_SMC9194 under CONFIG_MAC. This mistake got carried over into Kconfig in v2.5.55. (See pre-git era "[PATCH] add m68k dependencies to net driver config".) Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f147d0b3 |
|
15-Jan-2016 |
Yoshinori Sato <ysato@users.sourceforge.jp> |
net: smsc: Add support h8300 Add H8/300 platform support for smc91x Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
138b15ed |
|
21-Jun-2015 |
Paul Gortmaker <paul.gortmaker@windriver.com> |
drivers/net: remove all references to obsolete Ethernet-HOWTO This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6321b54a |
|
15-Jan-2015 |
Michael Schmitz <schmitzmic@gmail.com> |
net: smc91x: Add Atari EtherNAT support Add Atari specific code to the smc91x Ethernet driver. This code is used on the EtherNAT adapter card for the Atari Falcon extension port. Signed-off-by: Michael Schmitz <schmitz@debian.org> Tested-by: Christian Steigies <cts@debian.org> [geert: Sort Kconfig entries, split in hard and soft dependencies] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
372a0730 |
|
15-Dec-2014 |
Tobias Klauser <tklauser@distanz.ch> |
net: smc91x: Fix build without gpiolib If GPIOLIB=n the following build errors occur: drivers/net/ethernet/smsc/smc91x.c: In function 'try_toggle_control_gpio': drivers/net/ethernet/smsc/smc91x.c:2204:2: error: implicit declaration of function 'devm_gpiod_get_index' [-Werror=implicit-function-declaration] drivers/net/ethernet/smsc/smc91x.c:2204:7: warning: assignment makes pointer from integer without a cast [enabled by default] drivers/net/ethernet/smsc/smc91x.c:2213:2: error: implicit declaration of function 'gpiod_direction_output' [-Werror=implicit-function-declaration] drivers/net/ethernet/smsc/smc91x.c:2216:3: error: implicit declaration of function 'devm_gpiod_put' [-Werror=implicit-function-declaration] drivers/net/ethernet/smsc/smc91x.c:2222:2: error: implicit declaration of function 'gpiod_set_value_cansleep' [-Werror=implicit-function-declaration] Fix this by letting the driver depend on GPIOLIB if OF is selected. Fixes: 7d2911c4381 ("net: smc91x: Fix gpios for device tree based booting") Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5499776b |
|
12-Dec-2014 |
Tobias Klauser <tklauser@distanz.ch> |
net: ethernet: smsc: Allow to select SMC91X for nios2 This chip is present on the Nios2 Development Kit 2C35. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cdc4ead0 |
|
07-Nov-2013 |
Baruch Siach <baruch@tkos.co.il> |
netdev: smc91x: enable for xtensa Tested in VLAB Works Xtensa simulation. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a1606c7d |
|
17-Jun-2013 |
Ben Hutchings <ben@decadent.org.uk> |
net: Move MII out from under NET_CORE and hide it All drivers that select MII also need to select NET_CORE because MII depends on it. This is a bit ridiculous because NET_CORE is just a menu option that doesn't enable any code by itself. There is also no need for it to be a visible option, since its users all select it. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f1238261 |
|
20-May-2013 |
Mark Rutland <mark.rutland@arm.com> |
net: smsc911x: don't artificially limit build Currently the SMSC911X driver may only be built for a specific set of architectures, being limited to do so by a Kconfig depends line. This means that if a platform wishes to use the driver, its architecture must be added to the list explicitly, introducing pointless churn. This may have been due to the driver's use of the {read,write}s{b,w,l} functions, which have since been replaced with the more standard io{read,write}{8,16,32}_rep. We can instead depend on HAS_IOMEM, which should prevent build issues while allowing the driver to be built for currently unlisted architectures, including x86 and arm64. This patch removes the explicit list of architectures from the driver's depend line, and replaces it with a dependency on HAS_IOMEM. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1ae90e79 |
|
05-Sep-2012 |
Catalin Marinas <catalin.marinas@arm.com> |
arm64: vexpress: Enable ARMv8 RTSM model (SoC) support This patch adds the necessary Kconfig entries to enable support for the ARMv8 software model (Versatile Express platform) together with the defconfig update. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
|
#
aaba215c |
|
14-Sep-2011 |
Jeff Kirsher <jeffrey.t.kirsher@intel.com> |
MII: fix Kconfig dependencies for MII MII Kconfig option is apart of the core networking drivers and by default NET_CORE is enabled so drivers selecting MII will have MII enabled as well. It was found using the randconfig option during testing, MII would be selected but NET_CORE could be disabled. This caused a dependency error. Resolved the dependency by selecting NET_CORE when MII is selected. Reported-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
88f07484 |
|
23-Aug-2011 |
Jeff Kirsher <jeffrey.t.kirsher@intel.com> |
drivers/net/ethernet/*: Enabled vendor Kconfig options Based on finds for Stephen Rothwell, where current defconfig's enable a ethernet driver and it is not compiled due to the newly added NET_VENDOR_* component of Kconfig. This patch enables all the "new" Kconfig options so that current defconfig's will continue to compile the expected drivers. In addition, by enabling all the new Kconfig options does not add any un-expected options. CC: Stephen Rothwll <sfc@canb.auug.org.au> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
#
ae150435 |
|
12-May-2011 |
Jeff Kirsher <jeffrey.t.kirsher@intel.com> |
smsc: Move the SMC (SMSC) drivers Moves the SMC (SMSC) drivers into drivers/net/ethernet/smsc/ and the necessary Kconfig and Makefile changes. Also did some cleanup of NET_VENDOR_SMC Kconfig tag for the 8390 based drivers. CC: Nicolas Pitre <nico@fluxnic.net> CC: Donald Becker <becker@scyld.com> CC: Erik Stahlman <erik@vt.edu> CC: Dustin McIntire <dustin@sensoria.com> CC: Steve Glendinning <steve.glendinning@smsc.com> CC: David Hinds <dahinds@users.sourceforge.net> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|