sfc: Miscellaneous comment removals

Remove comments that only apply to Falcon and Siena.

Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: include vport_id in filter spec hash and equal()

Filters on different vports are qualified by different implicit MACs and/or
VLANs, so shouldn't be considered equal even if their other match fields
are identical.

Fixes: 7c460d9be610 ("sfc: Extend and abstract efx_filter_spec to cover Huntington/EF10")
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20221018092841.32206-1-pieter.jansen-van-vuuren@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sfc: support PTP over IPv6/UDP

commit bd4a2697e5e2 ("sfc: use hardware tx timestamps for more than
PTP") added support for hardware timestamping on TX for cards of the
8000 series and newer, in an effort to provide support for other
transports other than IPv4/UDP.

However, timestamping was still not working on RX for these other
transports. This patch add support for PTP over IPv6/UDP.

Tested: sync as master and as slave is correct using ptp4l from linuxptp
package, both with IPv4 and IPv6.

Suggested-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: use a dynamic m-port for representor RX and set it promisc

Representors do not want to be subject to the PF's Ethernet address
filters, since traffic from VFs will typically have a destination
either elsewhere on the link segment or on an overlay network.
So, create a dynamic m-port with promiscuous and all-multicast
filters, and set it as the egress port of representor default rules.
Since the m-port is an alias of the calling PF's own m-port, traffic
will still be delivered to the PF's RXQs, but it will be subject to
the VNRX filter rules installed on the dynamic m-port (specified by
the v-port ID field of the filter spec).

Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sfc: support RSS spreading of ethtool ntuple filters

Use a linked list to associate user-facing context IDs with FW-facing
context IDs (since the latter can change after an MC reset).

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: insert catch-all filters for encapsulated traffic

8000 series adapters support filtering VXLAN, NVGRE and GENEVE traffic
based on inner fields, and when the NIC recognises such traffic, it
does not match unencapsulated traffic filters any more. So add catch-
all filters for encapsulated traffic on supporting platforms.
Although recognition of VXLAN and GENEVE is based on UDP ports, and thus
will not occur until the driver (on the primary PF) notifies the
firmware of UDP ports to use, NVGRE will always be recognised, hence
without this patch 8000 series adapters will drop all NVGRE traffic.

Partly based on patches by Jon Cooper <jcooper@solarflare.com>.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: Use ether_addr_copy and eth_broadcast_addr

Faster than memcpy/memset on some architectures.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: Change priority and flags for automatic MAC filters

MAC filters inserted automatically by the driver, based on the device
address list (EF10) or no-match filters (Siena), should be overridable
at MANUAL or REQUIRED priority. Currently they themselves have
REQUIRED priority and this requires some odd special-casing.

We also can't reliably tell whether such a MAC filter has or has
not been overridden. We just remember that it is wanted by the
stack (RX_STACK flag).

Add another priority level, AUTO, between HINT and MANUAL, and
use this for the automatic filters while they have not been
overridden. Remove the RX_STACK flag. Add an RX_OVER_AUTO
flag which is set only when an AUTO filter has been overridden
(or was requested to be inserted while a higher-priority filter
existed).

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

sfc: Update copyright banners

Update the dates for files that have been added to in 2012-2013.
Drop the 'Solarstorm' brand name that's still lingering here.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

sfc: Add flag for stack-owned RX MAC filters

MAC filters inserted on request from the stack (ndo_set_rx_mode)
should allow manual steering but not removal. Currently we have a
special case for Siena's all-multicast and all-unicast MAC filters,
but on EF10 we need to allow for steering of precise MAC filters as
well.

The EFX_FILTER_FLAG_RX_STACK flag changes the behaviour of replacement
and removal requests:

- Replacement *of* a filter with this flag never clears the flag but
does change steering and saved priority
- Replacement *by* a filter with this flag only sets the flag but does
not change steering
- Removal with priority < EFX_FILTER_PRI_REQUIRED really resets RX
steering and saved priority

This could support precise MAC filtering on Siena in future.

As a side-benefit, the default MAC filters are hidden from ethtool
until they are steered.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

sfc: Extend and abstract efx_filter_spec to cover Huntington/EF10

Replace type field with match_flags. Add rss_context and match values
covering of most of what is now in the MCDI protocol.

Change some fields into bitfields so that the structure size doesn't grow
beyond 64 bytes.

Ditch the filter decoding functions as it is now easier to pick apart
the abstract structure.

Rewrite ethtool NFC rule functions to set/get filter match flags and
values directly.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

sfc: Name the RX drop queue ID

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP

This filter flag cannot yet be set through the ethtool command and
will not be supported on future hardware.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

sfc: Add support for TX MAC filters

On Siena each TX queue can be configured to send only packets for
which there is a TX MAC filter that matches the source MAC address,
queue ID, and optionally VID. This will be used to implement the
'spoofchk' feature for SR-IOV virtual functions.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

sfc: Add support for configuring RX unicast/multicast default filters

On Siena all received packets that don't match a more specific filter
will match the unicast or multicast default filter. Currently we
leave these set to the default values (RSS with base queue number of
0). Allow them to be reconfigured to select a single RX queue.

These default filters are programmed through the FILTER_CTL register,
but we represent them internally as an additional table of size 2.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

sfc: Add support for retrieving and removing filters by ID

These new functions will support an implementation of the ethtool
RX NFC rules API.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: Change filter ID generation to satisfy priority semantics of RX NFC

Also add note that the efx_filter_spec::priority field has nothing
to do with priority between multiple matching filters.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: Move the Solarflare drivers

Moves the Solarflare drivers into drivers/net/ethernet/sfc/ and
make the necessary Kconfig and Makefile changes.

CC: Steve Hodgson <shodgson@solarflare.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>