net: calxeda: Fix wrong function name in comments

Fixes the following W=1 kernel build warning(s):

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c:761: warning: expecting prototype for qlcnic_83xx_idc_cold_state(). Prototype was for qlcnic_83xx_idc_cold_state_handler() instead
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_vnic.c:192: warning: expecting prototype for qlcnic_83xx_vnic_opmode(). Prototype was for qlcnic_83xx_config_vnic_opmode() instead

Cc: Shahed Shaikh <shshaikh@marvell.com>
Cc: Manish Chopra <manishc@marvell.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/qlcnic: Convert to SPDX license identifiers

All files in this driver directory contain the following notice:

See LICENSE.qlcnic for copyright and licensing details.

LICENSE.qlacnic can be found in
Documentation/networking/device_drivers/qlogic/. The file contains:

- A copyright notice

This copyright notice is redundant as all files contain the same
copyright notice already

- A license notice

You may modify and redistribute the device driver code under the
GNU General Public License (a copy of which is attached hereto as
Exhibit A) published by the Free Software Foundation (version 2).

This can be replaced with the corresponding SPDX license identifier
(GPL-2.0-only) in the source files which reference this license
file.

- The full GPLv2 license text

A redundant copy of LICENSES/preferred/GPL-2.0

Remove the notices and add the SPDX license identifier GPL-2.0-only to the
source files.

Finally remove the now redundant LICENSE.qlcnic file.

Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qlcnic: fix a loop exit condition better

In the original code, if we succeeded on the last iteration through the
loop then we still returned failure.

Fixes: 389e4e04ad2d ('qlcnic: fix a timeout loop')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: fix a timeout loop

The problem here is that at the end of the loop we test for if
idc->vnic_wait_limit is zero, but since idc->vnic_wait_limit-- is a
post-op, it actually ends up set to (u8)-1. I have fixed this by
moving the decrement inside the loop.

Fixes: 486a5bc77a4a ('qlcnic: Add support for 83xx suspend and resume.')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: Use bool for rx_mac_learn.

o Use boolean type instead of u8.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: make local functions static

Functions only used in one file should be static.
Found by running make namespacecheck

Compile tested only.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: Do MAC learning for SRIOV PF.

o MAC learning will be done for SRIOV PF to help program VLAN filters
onto adapter. This will help VNIC traffic to flow through without
flooding traffic.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: Support for 16 virtual NIC functions.

Extend virtual NIC functions from 8 to 16 for 84xx adapter.

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: Remove redundant eSwitch enable commands

When more than one NIC physical functions are enabled on a port,
eSwitch on that port gets enabled automatically. Driver
need not explicitly enable the eSwitch.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: Print informational messages only once during driver load.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: Add support for per port eswitch configuration

There is an embedded switch per physical port on the adapter.
Add support for enabling and disabling the embedded switch
on per port basis.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: Add support for 83xx suspend and resume.

o Implement shutdown and resume handlers for 83xx.
o Refactor 82xx shutdown and resume handlers.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: Convert nested if-else to switch-case

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: Remove qlcnic_config_npars module parameter

qlcnic_config_npars module parameter is used to configure NPAR
operational modes where NPAR function is used for PCI passthrough.
Removing this paramter as PCI passthrough is not supported for
NPAR functions.

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: Updating copyright information.

We recently refactored the driver source, this patch will take care of
updating copyright date and adding it to newly added files.

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: Fix minidump in NPAR mode

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: enable 83xx virtual NIC mode

Enable 83xx virtual NIC mode

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>