#
e346e231 |
|
27-Jul-2023 |
Konstantin Khorenko <khorenko@virtuozzo.com> |
qed: Fix scheduling in a tasklet while getting stats Here we've got to a situation when tasklet called usleep_range() in PTT acquire logic, thus welcome to the "scheduling while atomic" BUG(). BUG: scheduling while atomic: swapper/24/0/0x00000100 [<ffffffffb41c6199>] schedule+0x29/0x70 [<ffffffffb41c5512>] schedule_hrtimeout_range_clock+0xb2/0x150 [<ffffffffb41c55c3>] schedule_hrtimeout_range+0x13/0x20 [<ffffffffb41c3bcf>] usleep_range+0x4f/0x70 [<ffffffffc08d3e58>] qed_ptt_acquire+0x38/0x100 [qed] [<ffffffffc08eac48>] _qed_get_vport_stats+0x458/0x580 [qed] [<ffffffffc08ead8c>] qed_get_vport_stats+0x1c/0xd0 [qed] [<ffffffffc08dffd3>] qed_get_protocol_stats+0x93/0x100 [qed] qed_mcp_send_protocol_stats case MFW_DRV_MSG_GET_LAN_STATS: case MFW_DRV_MSG_GET_FCOE_STATS: case MFW_DRV_MSG_GET_ISCSI_STATS: case MFW_DRV_MSG_GET_RDMA_STATS: [<ffffffffc08e36d8>] qed_mcp_handle_events+0x2d8/0x890 [qed] qed_int_assertion qed_int_attentions [<ffffffffc08d9490>] qed_int_sp_dpc+0xa50/0xdc0 [qed] [<ffffffffb3aa7623>] tasklet_action+0x83/0x140 [<ffffffffb41d9125>] __do_softirq+0x125/0x2bb [<ffffffffb41d560c>] call_softirq+0x1c/0x30 [<ffffffffb3a30645>] do_softirq+0x65/0xa0 [<ffffffffb3aa78d5>] irq_exit+0x105/0x110 [<ffffffffb41d8996>] do_IRQ+0x56/0xf0 Fix this by making caller to provide the context whether it could be in atomic context flow or not when getting stats from QED driver. QED driver based on the context provided decide to schedule out or not when acquiring the PTT BAR window. We faced the BUG_ON() while getting vport stats, but according to the code same issue could happen for fcoe and iscsi statistics as well, so fixing them too. Fixes: 6c75424612a7 ("qed: Add support for NCSI statistics.") Fixes: 1e128c81290a ("qed: Add support for hardware offloaded FCoE.") Fixes: 2f2b2614e893 ("qed: Provide iSCSI statistics to management") Cc: Sudarsana Kalluru <skalluru@marvell.com> Cc: David Miller <davem@davemloft.net> Cc: Manish Chopra <manishc@marvell.com> Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
42510dff |
|
05-Jun-2023 |
Manish Chopra <manishc@marvell.com> |
qed/qede: Fix scheduling while atomic Statistics read through bond interface via sysfs causes below bug and traces as it triggers the bonding module to collect the slave device statistics while holding the spinlock, beneath that qede->qed driver statistics flow gets scheduled out due to usleep_range() used in PTT acquire logic [ 3673.988874] Hardware name: HPE ProLiant DL365 Gen10 Plus/ProLiant DL365 Gen10 Plus, BIOS A42 10/29/2021 [ 3673.988878] Call Trace: [ 3673.988891] dump_stack_lvl+0x34/0x44 [ 3673.988908] __schedule_bug.cold+0x47/0x53 [ 3673.988918] __schedule+0x3fb/0x560 [ 3673.988929] schedule+0x43/0xb0 [ 3673.988932] schedule_hrtimeout_range_clock+0xbf/0x1b0 [ 3673.988937] ? __hrtimer_init+0xc0/0xc0 [ 3673.988950] usleep_range+0x5e/0x80 [ 3673.988955] qed_ptt_acquire+0x2b/0xd0 [qed] [ 3673.988981] _qed_get_vport_stats+0x141/0x240 [qed] [ 3673.989001] qed_get_vport_stats+0x18/0x80 [qed] [ 3673.989016] qede_fill_by_demand_stats+0x37/0x400 [qede] [ 3673.989028] qede_get_stats64+0x19/0xe0 [qede] [ 3673.989034] dev_get_stats+0x5c/0xc0 [ 3673.989045] netstat_show.constprop.0+0x52/0xb0 [ 3673.989055] dev_attr_show+0x19/0x40 [ 3673.989065] sysfs_kf_seq_show+0x9b/0xf0 [ 3673.989076] seq_read_iter+0x120/0x4b0 [ 3673.989087] new_sync_read+0x118/0x1a0 [ 3673.989095] vfs_read+0xf3/0x180 [ 3673.989099] ksys_read+0x5f/0xe0 [ 3673.989102] do_syscall_64+0x3b/0x90 [ 3673.989109] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3673.989115] RIP: 0033:0x7f8467d0b082 [ 3673.989119] Code: c0 e9 b2 fe ff ff 50 48 8d 3d ca 05 08 00 e8 35 e7 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 3673.989121] RSP: 002b:00007ffffb21fd08 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 3673.989127] RAX: ffffffffffffffda RBX: 000000000100eca0 RCX: 00007f8467d0b082 [ 3673.989128] RDX: 00000000000003ff RSI: 00007ffffb21fdc0 RDI: 0000000000000003 [ 3673.989130] RBP: 00007f8467b96028 R08: 0000000000000010 R09: 00007ffffb21ec00 [ 3673.989132] R10: 00007ffffb27b170 R11: 0000000000000246 R12: 00000000000000f0 [ 3673.989134] R13: 0000000000000003 R14: 00007f8467b92000 R15: 0000000000045a05 [ 3673.989139] CPU: 30 PID: 285188 Comm: read_all Kdump: loaded Tainted: G W OE Fix this by collecting the statistics asynchronously from a periodic delayed work scheduled at default stats coalescing interval and return the recent copy of statisitcs from .ndo_get_stats64(), also add ability to configure/retrieve stats coalescing interval using below commands - ethtool -C ethx stats-block-usecs <val> ethtool -c ethx Fixes: 133fac0eedc3 ("qede: Add basic ethtool support") Cc: Sudarsana Kalluru <skalluru@marvell.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Manish Chopra <manishc@marvell.com> Link: https://lore.kernel.org/r/20230605112600.48238-1-manishc@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
#
76660757 |
|
14-Oct-2021 |
Jakub Kicinski <kuba@kernel.org> |
ethernet: constify references to netdev->dev_addr in drivers This big patch sprinkles const on local variables and function arguments which may refer to netdev->dev_addr. Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Some of the changes here are not strictly required - const is sometimes cast off but pointer is not used for writing. It seems like it's still better to add the const in case the code changes later or relevant -W flags get enabled for the build. No functional changes. Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
e2dbc223 |
|
04-Oct-2021 |
Prabhakar Kushwaha <pkushwaha@marvell.com> |
qed: Add '_GTT' suffix to the IRO RAM macros GTT (Global translation table) is a fast-access window in the BAR into the register space, which only maps certain register addresses. This change helps enforce that only those addresses which are indeed mapped by the GTT are being accessed through it. Adding the '_GTT' suffix to the IRO FW memory (“RAM”) macros that access GTT-able region in FW memories (“RAM”) and use GTT macros to access RAM BAR from drivers. Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fe40a830 |
|
04-Oct-2021 |
Prabhakar Kushwaha <pkushwaha@marvell.com> |
qed: Update qed_hsi.h for fw 8.59.1.0 The qed_hsi.h has been updated to support new FW version 8.59.1.0 with changes. - Updates FW HSI (Hardware Software interface) structures. - Addition/update in function declaration and defines as per HSI. - Add generic infrastructure for FW error reporting as part of common event queue handling. - Move malicious VF error reporting to FW error reporting infrastructure. - Move consolidation queue initialization from FW context to ramrod message. qed_hsi.h header file changes lead to change in many files to ensure compilation. This patch also fixes the existing checkpatch warnings and few important checks. Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ee824f4b |
|
04-Oct-2021 |
Omkar Kulkarni <okulkarni@marvell.com> |
qed: Split huge qed_hsi.h header file The qed_hsi.h is a huge header file containing HSI (Hardware Software Interface) definitions of storm memory access, debug related, general and management firmware specific. In order to have a better code-organization HSI definition, this patch split the code across multiple files, i.e. - storm memory access HSI : qed_iro_hsi.h - debug related HSI : qed_dbg_hsi.h - Management firmware HSI : qed_mfg_hsi.h - General HSI : qed_hsi.h In addition, this patch also fixes existing checkpatch warnings and few important checks. Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f55e36d5 |
|
13-Sep-2021 |
Shai Malin <smalin@marvell.com> |
qed: Improve the stack space of filter_config() As it was reported and discussed in: https://lore.kernel.org/lkml/CAHk-=whF9F89vsfH8E9TGc0tZA-yhzi2Di8wOtquNB5vRkFX5w@mail.gmail.com/ This patch improves the stack space of qede_config_rx_mode() by splitting filter_config() to 3 functions and removing the union qed_filter_type_params. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
134639e9 |
|
09-Mar-2021 |
Gustavo A. R. Silva <gustavoars@kernel.org> |
qed: Fix fall-through warnings for Clang In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding a couple of break statements instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2d2fe843 |
|
09-Sep-2020 |
Dmitry Bogdanov <dbogdanov@marvell.com> |
net: qed: Disable aRFS for NPAR and 100G In CMT and NPAR the PF is unknown when the GFS block processes the packet. Therefore cannot use searcher as it has a per PF database, and thus ARFS must be disabled. Fixes: d51e4af5c209 ("qed: aRFS infrastructure support") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5ab90341 |
|
06-Jul-2020 |
Alexander Lobakin <alobakin@pm.me> |
net: qed: sanitize BE/LE data processing Current code assumes that both host and device operates in Little Endian in lots of places. While this is true for x86 platform, this doesn't mean we should not care about this. This commit addresses all parts of the code that were pointed out by sparse checker. All operations with restricted (__be*/__le*) types are now protected with explicit from/to CPU conversions, even if they're noops on common setups. I'm sure there are more such places, but this implies a deeper code investigation, and is a subject for future works. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a0f3266f |
|
06-Jul-2020 |
Alexander Lobakin <alobakin@pm.me> |
net: qed: use ptr shortcuts to dedup field accessing in some parts Use intermediate pointers instead of multiple dereferencing to simplify and beautify parts of code that will be addressed in the next commit. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c6b7314d |
|
06-Jul-2020 |
Alexander Lobakin <alobakin@pm.me> |
net: qed: cleanup global structs declarations Fix several sparse warnings by moving structs declarations into the corresponding header files: drivers/net/ethernet/qlogic/qed/qed_dcbx.c:2402:32: warning: symbol 'qed_dcbnl_ops_pass' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_ll2.c:2754:26: warning: symbol 'qed_ll2_ops_pass' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_ptp.c:449:30: warning: symbol 'qed_ptp_ops_pass' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_sriov.c:5265:29: warning: symbol 'qed_iov_ops_pass' was not declared. Should it be static? (some of them were declared twice in different header files) Also make qed_hw_err_type_descr[] const while at it. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
663eacd8 |
|
29-Jun-2020 |
Alexander Lobakin <alobakin@pm.me> |
net: qed: update copyright years Set the actual copyright holder and years in all qed source files. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1f4d4ed6 |
|
29-Jun-2020 |
Alexander Lobakin <alobakin@pm.me> |
net: qed: convert to SPDX License Identifiers QLogic QED drivers source code is dual licensed under GPL-2.0/BSD-3-Clause. Remove all the boilerplates in the existing code and replace it with the correct SPDX tag. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7df0a6a3 |
|
05-Apr-2020 |
Colin Ian King <colin.king@canonical.com> |
qed: remove redundant assignment to variable 'rc' The variable 'rc' is being assigned a value that is never read and it is being updated later with a new value. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7c116e02 |
|
22-Jul-2019 |
Arnd Bergmann <arnd@arndb.de> |
qed: reduce maximum stack frame size clang warns about an overly large stack frame in one function when it decides to inline all __qed_get_vport_*() functions into __qed_get_vport_stats(): drivers/net/ethernet/qlogic/qed/qed_l2.c:1889:13: error: stack frame size of 1128 bytes in function '_qed_get_vport_stats' [-Werror,-Wframe-larger-than=] Use a noinline_for_stack annotation to prevent clang from inlining these, which keeps the maximum stack usage at around half of that in the worst case, similar to what we get with gcc. Fixes: 86622ee75312 ("qed: Move statistics to L2 code") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
83bf76e3 |
|
26-May-2019 |
Michal Kalderon <michal.kalderon@marvell.com> |
qed: Modify api for performing a dmae to another PF This patch modifies the dmae API to enable performing a dmae operation to another PF. This enables sharing between the llh entries between PFs and thus increasing the amount of filters per PF under certain configurations. The llh entries require using the dmae since the memory is widebus, which requires atomicity in access. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0ebcebbe |
|
21-Feb-2019 |
Sudarsana Reddy Kalluru <skalluru@marvell.com> |
qed: Read device port count from the shmem Read port count from the shared memory instead of driver deriving this value. This change simplifies the driver implementation and also avoids any dependencies for finding the port-count. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8c850253 |
|
06-Feb-2019 |
Rahul Verma <rverma@marvell.com> |
qed: Change verbosity for coalescing message. Fix unnecessary logging of message in an expected default case where coalescing value read (via ethtool -c) migh not be valid unless they are configured explicitly in the hardware using ethtool -C. Signed-off-by: Rahul Verma <rverma@marvell.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fb1faab7 |
|
06-Feb-2019 |
Sudarsana Reddy Kalluru <skalluru@marvell.com> |
qed: Consider TX tcs while deriving the max num_queues for PF. Max supported queues is derived incorrectly in the case of multi-CoS. Need to consider TCs while calculating num_queues for PF. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ff929696 |
|
28-Jan-2019 |
Manish Chopra <manishc@marvell.com> |
qed: Fix LACP pdu drops for VFs VF is always configured to drop control frames (with reserved mac addresses) but to work LACP on the VFs, it would require LACP control frames to be forwarded or transmitted successfully. This patch fixes this in such a way that trusted VFs (marked through ndo_set_vf_trust) would be allowed to pass the control frames such as LACP pdus. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9e71a15d |
|
28-Jan-2019 |
Manish Chopra <manishc@marvell.com> |
qed: Fix bug in tx promiscuous mode settings When running tx switched traffic between VNICs created via a bridge(to which VFs are added), adapter drops the unicast packets in tx flow due to VNIC's ucast mac being unknown to it. But VF interfaces being in promiscuous mode should have caused adapter to accept all the unknown ucast packets. Later, it was found that driver doesn't really configure tx promiscuous mode settings to accept all unknown unicast macs. This patch fixes tx promiscuous mode settings to accept all unknown/unmatched unicast macs and works out the scenario. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fb5e7438 |
|
08-Nov-2018 |
Denis Bolotin <denis.bolotin@cavium.com> |
qed: Fix SPQ entries not returned to pool in error flows qed_sp_destroy_request() API was added for SPQ users that need to free/return the entry they acquired in their error flows. Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5e7baf0f |
|
09-Aug-2018 |
Manish Chopra <manish.chopra@cavium.com> |
qed/qede: Multi CoS support. This patch adds support for tc mqprio offload, using this different traffic classes on the adapter can be utilized based on configured priority to tc map. For example - tc qdisc add dev eth0 root mqprio num_tc 4 map 0 1 2 3 This will cause SKBs with priority 0,1,2,3 to transmit over tc 0,1,2,3 hardware queues respectively. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
25c020a9 |
|
18-Jul-2018 |
Sudarsana Reddy Kalluru <sudarsana.kalluru@cavium.com> |
qed: Correct Multicast API to reflect existence of 256 approximate buckets. FW hsi contains 256 approximation buckets which are split in ramrod into eight u32 values, but driver is using eight 'unsigned long' variables. This patch fixes the mcast logic by making the API utilize u32. Fixes: 83aeb933 ("qed*: Trivial modifications") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fad953ce |
|
12-Jun-2018 |
Kees Cook <keescook@chromium.org> |
treewide: Use array_size() in vzalloc() The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
|
#
6396bb22 |
|
12-Jun-2018 |
Kees Cook <keescook@chromium.org> |
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
|
#
d52c89f1 |
|
05-Jun-2018 |
Michal Kalderon <Michal.Kalderon@cavium.com> |
qed*: Utilize FW 8.37.2.0 This FW contains several fixes and features. RDMA - Several modifications and fixes for Memory Windows - drop vlan and tcp timestamp from mss calculation in driver for this FW - Fix SQ completion flow when local ack timeout is infinite - Modifications in t10dif support ETH - Fix aRFS for tunneled traffic without inner IP. - Fix chip configuration which may fail under heavy traffic conditions. - Support receiving any-VNI in VXLAN and GENEVE RX classification. iSCSI / FcoE - Fix iSCSI recovery flow - Drop vlan and tcp timestamp from mss calc for fw 8.37.2.0 Misc - Several registers (split registers) won't read correctly with ethtool -d Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
32d26a68 |
|
29-May-2018 |
Sudarsana Reddy Kalluru <sudarsana.kalluru@cavium.com> |
qed*: Add link change count value to ethtool statistics display. This patch adds driver changes for capturing the link change count in ethtool statistics display. Please consider applying this to "net-next". Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
608e00d0 |
|
24-May-2018 |
Manish Chopra <manish.chopra@cavium.com> |
qed*: Support drop action classification With this patch, User can configure for the supported flows to be dropped. Added a stat "gft_filter_drop" as well to be populated in ethtool for the dropped flows. For example - ethtool -N p5p1 flow-type udp4 dst-port 8000 action -1 ethtool -N p5p1 flow-type tcp4 scr-ip 192.168.8.1 action -1 Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3893fc62 |
|
24-May-2018 |
Manish Chopra <manish.chopra@cavium.com> |
qed*: Support other classification modes. Currently, driver supports flow classification to PF receive queues based on TCP/UDP 4 tuples [src_ip, dst_ip, src_port, dst_port] only. This patch enables to configure different flow profiles [For example - only UDP dest port or src_ip based] on the adapter so that classification can be done according to just those fields as well. Although, at a time just one type of flow configuration is supported due to limited number of flow profiles available on the device. For example - ethtool -N enp7s0f0 flow-type udp4 dst-port 45762 action 2 ethtool -N enp7s0f0 flow-type tcp4 src-ip 192.16.4.10 action 1 ethtool -N enp7s0f0 flow-type udp6 dst-port 45762 action 3 Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
af6858ee |
|
08-May-2018 |
Michal Kalderon <Michal.Kalderon@cavium.com> |
qed: Fix l2 initializations over iWARP personality If qede driver was loaded on a device configured for iWARP the l2 mutex wouldn't be allocated, and some l2 related resources wouldn't be freed. fixes: c851a9dc4359 ("qed: Introduce iWARP personality") Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
809c45a0 |
|
19-Apr-2018 |
Shahed Shaikh <shahed.shaikh@cavium.com> |
qed* : Add new TLV to request PF to update MAC in bulletin board There may be a need for VF driver to request PF to explicitly update its bulletin with a MAC address. e.g. When user assigns a MAC address to VF while VF is still down, and PF's bulletin board contains different MAC address, in this case, when VF's interface is brought up, it gets loaded with MAC address from bulletin board which is not desirable. To handle this corner case, we need a new TLV to request PF to update its bulletin board with suggested MAC. This request will be honored only for trusted VFs. Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
50bc60cb |
|
28-Mar-2018 |
Michal Kalderon <Michal.Kalderon@cavium.com> |
qed*: Utilize FW 8.33.11.0 This FW contains several fixes and features RDMA Features - SRQ support - XRC support - Memory window support - RDMA low latency queue support - RDMA bonding support RDMA bug fixes - RDMA remote invalidate during retransmit fix - iWARP MPA connect interop issue with RTR fix - iWARP Legacy DPM support - Fix MPA reject flow - iWARP error handling - RQ WQE validation checks MISC - Fix some HSI types endianity - New Restriction: vlan insertion in core_tx_bd_data can't be set for LB packets ETH - HW QoS offload support - Fix vlan, dcb and sriov flow of VF sending a packet with inband VLAN tag instead of default VLAN - Allow GRE version 1 offloads in RX flow - Allow VXLAN steering iSCSI / FcoE - Fix bd availability checking flow - Support 256th sge proerly in iscsi/fcoe retransmit - Performance improvement - Fix handle iSCSI command arrival with AHS and with immediate - Fix ipv6 traffic class configuration DEBUG - Update debug utilities Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Acked-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5f58dff9 |
|
30-Dec-2017 |
Himanshu Jha <himanshujha199640@gmail.com> |
qed: Use zeroing memory allocator than allocator/memset Use dma_zalloc_coherent and vzalloc for allocating zeroed memory and remove unnecessary memset function. Done using Coccinelle. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci 0-day tested with no failures. Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Acked-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
da090917 |
|
27-Dec-2017 |
Tomer Tayar <Tomer.Tayar@cavium.com> |
qed*: Utilize FW 8.33.1.0 Advance the qed* drivers to use firmware 8.33.1.0: Modify core driver (qed) to utilize the new FW and initialize the device with it. This is the lion's share of the patch, and includes changes to FW interface files, device initialization flows, FW interaction flows, and debug collection flows. Modify Ethernet driver (qede) to make use of new FW in fastpath. Modify RoCE/iWARP driver (qedr) to make use of new FW in fastpath. Modify FCoE driver (qedf) to make use of new FW in fastpath. Modify iSCSI driver (qedi) to make use of new FW in fastpath. Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Bason <Yuval.Bason@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com> Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com> Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9e4a5613 |
|
29-Aug-2017 |
Colin Ian King <colin.king@canonical.com> |
qed: fix spelling mistake: "calescing" -> "coalescing" Trivial fix to spelling mistake in DP_NOTICE message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
bf5a94bf |
|
26-Jul-2017 |
Rahul Verma <Rahul.Verma@cavium.com> |
qed: Read per queue coalesce from hardware Retrieve the actual coalesce value from hardware for every Rx/Tx queue, instead of Rx/Tx coalesce value cached during set coalesce. Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
456a5849 |
|
02-Jul-2017 |
Kalderon, Michal <Michal.Kalderon@cavium.com> |
qed: iWARP CM add passive side connect This patch implements the passive side connect. It addresses pre-allocating resources, creating a connection element upon valid SYN packet received. Calling upper layer and implementation of the accept/reject calls. Error handling is not part of this patch. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c851a9dc |
|
02-Jul-2017 |
Kalderon, Michal <Michal.Kalderon@cavium.com> |
qed: Introduce iWARP personality iWARP personality introduced the need for differentiating in several places in the code whether we are RoCE, iWARP or either. This leads to introducing new macros for querying the personality. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0331402a |
|
13-Jun-2017 |
Dan Carpenter <dan.carpenter@oracle.com> |
qed: Fix an off by one bug The p_l2_info->pp_qid_usage[] array has "p_l2_info->queues" elements so the > here should be a >= or we write beyond the end of the array. Fixes: bbe3f233ec5e ("qed: Assign a unique per-queue index to queue-cid") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cbb8a12c |
|
04-Jun-2017 |
Mintz, Yuval <Yuval.Mintz@cavium.com> |
qed: VF XDP support The final addition on the qed front - - VFs would now require their PFs to provide multiple CIDs - Based on the availability of connections from PF, determine whether XDP is feasible and share it with qede via dev_info. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
08bc8f15 |
|
04-Jun-2017 |
Mintz, Yuval <Yuval.Mintz@cavium.com> |
qed: Multiple qzone queues for VFs This adds the infrastructure for supporting VFs that want to open multiple transmission queues on the same queue-zone. At this point, there are no VFs that actually request this functionality, but later patches would remedy that. a. VF and PF would communicate the capability during ACQUIRE; Legacy VFs would continue on behaving as they do today b. PF would communicate number of supported CIDs to the VF and would enforce said limitation c. Whenever VF passes a request for a given queue configuration it would also pass an associated index within said queue-zone Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
007bc371 |
|
04-Jun-2017 |
Mintz, Yuval <Yuval.Mintz@cavium.com> |
qed: IOV db support multiple queues per qzone Allow the infrastructure a PF maintains for each one of its VFs to support multiple queue-cids on a single queue-zone. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3b19f478 |
|
04-Jun-2017 |
Mintz, Yuval <Yuval.Mintz@cavium.com> |
qed: Make VF legacy a bitfield Until now we used to have a single VF legacy compatibility mode, one that affected the place of the Rx producers of those VFs [mostly]. As PF would soon support allocating CIDs for VFs instead of having a static CID<->queue configuration for them, we'll need to have an additional legacy mode since existing VFs would need to continue on using the older mode of operation. Change the infrastrucutre so that the legacy would be able to indicate which of the legacy behaviors is needed for a given VF. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
bbe3f233 |
|
04-Jun-2017 |
Mintz, Yuval <Yuval.Mintz@cavium.com> |
qed: Assign a unique per-queue index to queue-cid When a queue-cid is allocated, assign an index inside that's CID's queue-zone. For PFs and VFS, this number is going to be unique and derive from a per-queue-zone bitmap, while for PF's VFs queues the number is currently going to constant; Later, we'd add the capability of a VF to communicate such an index to its PF. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3946497a |
|
04-Jun-2017 |
Mintz, Yuval <Yuval.Mintz@cavium.com> |
qed: Pass vf_params when creating a queue-cid We're going to need additional information for queue-cids that a PF creates for its VFs, so start by refactoring existing logic used for initializing said struct into receiving a structure encapsulating the VF-specific information that needs to be provided. This also introduces QED_QUEUE_CID_SELF - each queue-cid would hold an indication to whether it belongs to the hw-function holding it [whether that's a PF or a VF], or else what's the VF id it belongs to. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f604b17d |
|
04-Jun-2017 |
Mintz, Yuval <Yuval.Mintz@cavium.com> |
qed*: L2 interface to use the SB structures directly Part of an effort of a cleaner seperation between qed and the protocol drivers, the L2 interface is to use the SB structure for initialization purposes opaquely. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0db711bb |
|
04-Jun-2017 |
Mintz, Yuval <Yuval.Mintz@cavium.com> |
qed: Create L2 queue database First step in allowing a single PF/VF to open multiple queues on the same queue zone is to add per-hwfn database of queue-cids as a two-dimensional array where entry would be according to [queue zone][internal index]. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4f64675f |
|
23-May-2017 |
Manish Chopra <Manish.Chopra@cavium.com> |
qed: !main_ptt for tunnel configuration Flows configuring tunnel ports in HW use the main_ptt which should be reserved for core-functionality. Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
74ed053d |
|
18-May-2017 |
Wei Yongjun <weiyongjun1@huawei.com> |
qed: Remove unused including <linux/version.h> Remove including <linux/version.h> that is not needed. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
eaf3c0c6 |
|
24-Apr-2017 |
Chopra, Manish <Manish.Chopra@cavium.com> |
qed - VF tunnelling support [VXLAN/GENEVE/GRE] This patch adds hardware channel APIs support between VF and PF for tunnelling configuration for the VFs. According to that configuration VFs can run VXLAN/GENEVE/GRE tunnels over it with tunnel features offloaded. Using these APIs VF can also request for UDP ports configuration to the PF, although PF and it's child VFs share the same port. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
97379f15 |
|
24-Apr-2017 |
Chopra, Manish <Manish.Chopra@cavium.com> |
qed/qede: Add UDP ports in bulletin board This patch adds support for UDP ports in bulletin board to notify UDP ports change to the VFs Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
19968430 |
|
24-Apr-2017 |
Chopra, Manish <Manish.Chopra@cavium.com> |
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d51e4af5 |
|
13-Apr-2017 |
Chopra, Manish <Manish.Chopra@cavium.com> |
qed: aRFS infrastructure support This patch adds necessary APIs to interface with qede aRFS support in successive patch. It also reserves separate PTT entry for aRFS, [as being in fastpath flow] for hardware access instead of trying to acquire it at run time from the ptt pool. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
15582962 |
|
06-Apr-2017 |
Rahul Verma <Rahul.Verma@cavium.com> |
qed: Don't use main-ptt in unrelated flows In order to access HW registers driver needs to acquire a PTT entry [mapping between bar memory and internal chip address]. Since acquiring PTT entries could fail [at least in theory] as their number is finite and other flows can hold them, we reserve special PTT entries for 'important' enough flows - ones we want to guarantee that would not be susceptible to such issues. One such special entry is the 'main' PTT which is meant to be used in flows such as chip initialization and de-initialization. However, there are other flows that are also using that same entry for their own purpose, and might run concurrently with the original flows [notice that for most cases using the main-ptt by mistake, such a race is still impossible, at least today]. This patch re-organizes the various functions that currently use the main_ptt in one of two ways: - If a function shouldn't use the main_ptt it starts acquiring and releasing it's own PTT entry and use it instead. Notice if those functions previously couldn't fail, they now can [as acquisition might fail]. - Change the prototypes so that the main_ptt would be received as a parameter [instead of explicitly accessing it]. This prevents the future risk of adding codes that introduces new use-cases for flows using the main_ptt, ones that might be in race with the actual 'main' flows. Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b5a9ee7c |
|
02-Apr-2017 |
Ariel Elior <Ariel.Elior@cavium.com> |
qed: Revise QM cofiguration Refactor and clean up the queue manager initialization logic. Also, this adds support for RoC low latency queues, which later would be used for improving RoCE latency in high throughput scenarios. Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9c79ddaa |
|
14-Mar-2017 |
Mintz, Yuval <Yuval.Mintz@cavium.com> |
qed*: Add support for QL41xxx adapters This adds the necessary infrastructure changes for initializing and working with the new series of QL41xxx adapaters. It also adds 2 new PCI device-IDs to qede: - 0x8070 for QL41xxx PFs - 0x8090 for VFs spawning from QL41xxx PFs Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c78c70fa |
|
15-Feb-2017 |
Sudarsana Reddy Kalluru <sudarsana.Kalluru@cavium.com> |
qed: Add infrastructure for PTP support The patch adds the required qed interfaces for configuring/reading the PTP clock on the adapter. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0ee28e31 |
|
16-Jan-2017 |
Shyam Saini <mayhs11saini@gmail.com> |
qed: Replace memset with eth_zero_addr Use eth_zero_addr to assign zero address to the given address array instead of memset when the second argument in memset is address of zero. Also, it makes the code clearer Signed-off-by: Shyam Saini <mayhs11saini@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
88067876 |
|
01-Jan-2017 |
Mintz, Yuval <Yuval.Mintz@cavium.com> |
qed: Support Multicast on Tx-switching Currently multicast traffic wouldn't be routed internally to listener; Instead it would only be sent to network via the physical carrier. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f29ffdb6 |
|
01-Jan-2017 |
Mintz, Yuval <Yuval.Mintz@cavium.com> |
qed*: RSS indirection based on queue-handles A step toward having qede agnostic to the queue configurations in firmware/hardware - let the RSS indirections use queue handles instead of actual queue indices. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e1d32acb |
|
01-Jan-2017 |
Mintz, Yuval <Yuval.Mintz@cavium.com> |
qed*: Change maximal number of queues Today qede requests contexts that would suffice for 64 'whole' combined queues [192 meant for 64 rx, tx and xdp tx queues], but registers netdev and limits the number of queues based on information received by qed. In turn, qed doesn't take context into account when informing qede how many queues it can support. This would lead to a configuration problem in case user tries configuring >64 combined queues to interface [or >96 in case xdp isn't enabled]. Since we don't have a mangement firware that actually provides so many interrupt lines to a single device we're currently safe but that's about to change soon. The new maximum is hence changed: - For RoCE devices, the limit would remain 64. - For non-RoCE devices, the limit might be higher [depending on the actual configuration of the device]. qed would start enforcing that limit in both scenarios. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e8f1cb50 |
|
01-Jan-2017 |
Mintz, Yuval <Yuval.Mintz@cavium.com> |
qed*: Update to dual-license Since the submission of the qedr driver, there's inconsistency in the licensing of the various qed/qede files - some are GPLv2 and some are dual-license. Since qedr requires dual-license and it's dependent on both, we're updating the licensing of all qed/qede source files. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3da7a37a |
|
29-Nov-2016 |
Mintz, Yuval <Yuval.Mintz@cavium.com> |
qed*: Handle-based L2-queues. The driver needs to maintain several FW/HW-indices for each one of its queues. Currently, that mapping is done by the QED where it uses an rx/tx array of so-called hw-cids, populating them whenever a new queue is opened and clearing them upon destruction of said queues. This maintenance is far from ideal - there's no real reason why QED needs to maintain such a data-structure. It becomes even worse when considering the fact that the PF's queues and its child VFs' queues are all mapped into the same data-structure. As a by-product, the set of parameters an interface needs to supply for queue APIs is non-trivial, and some of the variables in the API structures have different meaning depending on their exact place in the configuration flow. This patch re-organizes the way L2 queues are configured and maintained. In short: - Required parameters for queue init are now well-defined. - Qed would allocate a queue-cid based on parameters. Upon initialization success, it would return a handle to caller. - Queue-handle would be maintained by entity requesting queue-init, not necessarily qed. - All further queue-APIs [update, destroy] would use the opaque handle as reference for the queue instead of various indices. The possible owners of such handles: - PF queues [qede] - complete handles based on provided configuration. - VF queues [qede] - fw-context-less handles, containing only relative information; Only the PF-side would need the absolute indices for configuration, so they're omitted here. - VF queues [qed, PF-side] - complete handles based on VF initialization. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b0fca312 |
|
31-Oct-2016 |
Mintz, Yuval <Yuval.Mintz@cavium.com> |
qed: Correct VF mac number When relaxing the limitation on the number of unicast MAC filters an interface can configure, qed started passing the MAC quota to qede. However, the value is initialized only for PFs, causing VFs to always try and configure themselves as promiscuous [as they believe they lack the resources to configure the rx-mode]. Fixes: 7b7e70f979e3 ("qed*: Allow unicast filtering") Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2edbff8d |
|
30-Oct-2016 |
Tomer Tayar <Tomer.Tayar@cavium.com> |
qed: Learn resources from management firmware Currently, each interfaces assumes it receives an equal portion of HW/FW resources, but this is wasteful - different partitions [and specifically, parititions exposing different protocol support] might require different resources. Implement a new resource learning scheme where the information is received directly from the management firmware [which has knowledge of all of the functions and can serve as arbiter]. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7b7e70f9 |
|
14-Oct-2016 |
Yuval Mintz <Yuval.Mintz@caviumnetworks.com> |
qed*: Allow unicast filtering Apparently qede fails to set IFF_UNICAST_FLT, and as a result is not actually performing unicast MAC filtering. While we're at it - relax a hard-coded limitation that limits each interface into using at most 15 unicast MAC addresses before turning promiscuous. Instead utilize the HW resources to their limit. Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ba56947a |
|
08-Sep-2016 |
Baoyou Xie <baoyou.xie@linaro.org> |
qed: mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/net/ethernet/qlogic/qed/qed_l2.c:112:5: warning: no previous prototype for 'qed_sp_vport_start' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:110:6: warning: no previous prototype for 'qed_iov_is_valid_vfid' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:188:5: warning: no previous prototype for 'qed_iov_post_vf_bulletin' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:578:6: warning: no previous prototype for 'qed_iov_set_vfs_to_disable' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:1135:28: warning: no previous prototype for 'qed_iov_get_public_vf_info' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:1148:6: warning: no previous prototype for 'qed_iov_clean_vf' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:2444:5: warning: no previous prototype for 'qed_iov_chk_ucast' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:2762:5: warning: no previous prototype for 'qed_iov_vf_flr_cleanup' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d8c2c7e3 |
|
22-Aug-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed*: Add support for VFs over legacy PFs Modern VFs can't run on old non-compatible as the fastpath HSI is slightly changed - but as the HSI is actually very close [basically, a single bit whose meaning flipped] this can be supported with small modifications. The major differences would be in: - Recognizing that VF is running on top of a legacy PF. - Returning some slowpath configurations that are no longer needed on top of modern PFs, but would be required when working over the legacy ones. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
11a85d75 |
|
22-Aug-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed: Prevent VFs from pause flooding Firmware would silently drop any control frame sent by VF to prevent a malicious VF from generating pause flood in the network. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a044df83 |
|
22-Aug-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed: Add support for legacy VFs The 8.10.x FW added support for forward compatability as well as 'future' backward compatibility, but only to those VFs that were using HSI which was 8.10.x based or newer. The latest firmware now supports backward compatibility for the older VFs based on 8.7.x and 8.8.x firmware as well. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
83aeb933 |
|
15-Aug-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed*: Trivial modifications Change qed* code in trivial manner; This isn't necessarily semantic-only, but the end result is the same, i.e., no change should occur from user perspective. Changes include: - Using temporary variables to better fit 80-character restrictions. - Removal of unused variables & code with no effect. [plus some additional minor modifications]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1a635e48 |
|
15-Aug-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed*: Semantic changes Make semantic-only adjustments to qed* drivers, such as: - Changes in code indentation. - Usage of BIT() macro. - re-naming of variables. - Re-ordering of variable declerations. - Removal of (== 0) and (!= 0) in conditions. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
25eb8d46 |
|
27-Jul-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed: Prevent over-usage of vlan credits by PF Each PF/VF has a limited number of vlan filters for configuration purposes; This information is passed to qede and is used to prevent over-usage - once a vlan is to be configured and no filter credit is available, the driver would switch into working in vlan-promisc mode. Problem is the credit pool is shared by both PFs and VFs, and currently PFs aren't deducting the filters that are reserved for their VFs from their quota, which may lead to some vlan filters failing unknowingly due to lack of credit. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b21290b7 |
|
27-Jul-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed: Don't over-do producer cleanup for Rx Before requesting the firmware to start Rx queues, driver goes and sets the queue producer in the device to 0. But while the producer is 32-bit, the driver currently clears 64 bits, effectively zeroing an additional CID's producer as well. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a0d26d5a |
|
19-Jun-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed*: Don't reset statistics on inner reload Several user APIs can cause driver to perform an inner-reload. Currently, doing this would cause the HW/FW statistics of the adapter to reset, which isn't the expected behavior [statistics should only reset on explicit unloads]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
32643988 |
|
19-Jun-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed: Prevent VF from Tx-switching 'promisc' Internal loopback in driver is based on two things - first is the willingness of transmitter to use it [in case of VFs, this can be forced based on VEPA/VEB] and secondly on another vport classification configuration which should match the packet's destination. Current code allows non-linux VFs to configure a 'promisc' mode on Tx, meaning all traffic sent by VF would be loopbacked internally by firmware; This isn't considered a valid mode and as such should be prevented by PF. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e6bd8923 |
|
19-Jun-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed: Correct default vlan behavior When no vlan filter is configured, firmware has a configurable default on whether to pass only untagged packets or all packets regardless of their tagging. Driver currently doesn't set this field in the necessary ramrod, causing the default to always be 'receive all'. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a1d8d8a5 |
|
08-Jun-2016 |
Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> |
qed: Add dcbnl support. This patch adds the implementation for both cee/ieee dcbnl callbacks by using the qed query/config APIs. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
351a4ded |
|
02-Jun-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed: Utilize FW 8.10.3.0 The New QED firmware contains several fixes, including: - Wrong classification of packets in 4-port devices. - Anti-spoof interoperability with encapsulated packets. - Tx-switching of encapsulated packets. It also slightly improves Tx performance of the device. In addition, this firmware contains the necessary logic for supporting iscsi & rdma, for which we plan on pushing protocol drivers in the imminent future. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
831bfb0e |
|
11-May-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed*: Tx-switching configuration Device should be configured by default to VEB once VFs are active. This changes the configuration of both PFs' and VFs' vports into enabling tx-switching once sriov is enabled. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6ddc7608 |
|
11-May-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed*: IOV support spoof-checking Add support in `ndo_set_vf_spoofchk' for allowing PF control over its VF spoof-checking configuration. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
eff16960 |
|
11-May-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed*: Support forced MAC Allows the PF to enforce the VF's mac. i.e., by using `ip link ... vf <x> mac <value>'. While a MAC is forced, PF would prevent the VF from configuring any other MAC. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
08feecd7 |
|
11-May-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed*: Support PVID configuration This adds support for PF control over the VF vlan configuration. I.e., `ip link ... vf <x> vlan <vid>' should now be supported. 1. <vid> != 0 => VF receives [unknowingly] only traffic tagged by <vid> and tags all outgoing traffic sent by VF with <vid>. 2. <vid> == 0 ==> Remove the pvid configuration, reverting to previous. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
17b235c1 |
|
11-May-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed: Align TLVs As the VF infrastructure is supposed to offer backward/forward compatibility, the various types associated with VF<->PF communication should be aligned across all various platforms that support IOV on our family of adapters. This adds a couple of currently missing values, specifically aligning the enum for the various TLVs possible in the communication between them. It then adds the PF implementation for some of those missing VF requests. This support isn't really necessary for the Linux VF as those VFs aren't requiring it [at least today], but are required by VFs running on other OSes. LRO is an example of one such configuration. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
dacd88d6 |
|
11-May-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed: IOV l2 functionality This adds sufficient changes to allow VFs l2-configuration flows to work. While the fastpath of the VF and the PF are meant to be exactly the same, the configuration of the VF is done by the PF. This diverges all VF-related configuration flows that originate from a VF, making them pass through the VF->PF channel and adding sufficient logic on the PF side to support them. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0b55e27d |
|
11-May-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed: IOV configure and FLR While previous patches have already added the necessary logic to probe VFs as well as enabling them in the HW, this patch adds the ability to support VF FLR & SRIOV disable. It then wraps both flows together into the first IOV callback to be provided to the protocol driver - `configure'. This would later to be used to enable and disable SRIOV in the adapter. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1408cc1f |
|
11-May-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed: Introduce VFs This adds the qed VFs for the first time - The vfs are limited functions, with a very different PCI bar structure [when compared with PFs] to better impose the related security demands associated with them. This patch includes the logic neccesary to allow VFs to successfully probe [without actually adding the ability to enable iov]. This includes diverging all the flows that would occur as part of the pci probe of the driver, preventing VF from accessing registers/memories it can't and instead utilize the VF->PF channel to query the PF for needed information. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d4967cf3 |
|
21-Apr-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed*: Align statistics names There's a difference in statsitics' names starting at qed and propagating to qede, where egress counters indicate ranges while ingress counters indiciate high-end. Align all statistcs to follow the same conventions - name indicates range. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
464f6645 |
|
13-Apr-2016 |
Manish Chopra <manish.chopra@qlogic.com> |
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8c5ebd0c |
|
09-Apr-2016 |
Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> |
qed: add Rx flow hash/indirection support. Adds the required API for passing RSS-related configuration from qede. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
95114344 |
|
09-Apr-2016 |
Rahul Verma <rahul.verma@qlogic.com> |
qed*: remove version dependency Inbox drivers don't need versioning scheme in order to guarantee compatibility, as both qed and qede are compiled from same codebase. Signed-off-by: Rahul Verma <rahul.verma@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
088c8618 |
|
03-Mar-2016 |
Manish Chopra <manish.chopra@qlogic.com> |
qed/qede: Add infrastructure support for hardware GRO This patch adds mainly structures and APIs prototype changes in order to give support for qede slowpath/fastpath support for the same. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
86622ee7 |
|
02-Mar-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed: Move statistics to L2 code Current statistics logic is meant for L2, not for all future protocols. Move this content to the proper designated file. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
94494598 |
|
21-Feb-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed: Introduce DMA_REGPAIR_LE FW hsi contains regpairs, mostly for 64-bit address representations. Since same paradigm is applied each time a regpair is filled, this introduces a new utility macro for setting such regpairs. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
06f56b81 |
|
21-Feb-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed: Change metadata needed for SPQ entries Each configuration element send via ramrod requires a Slow Path Queue entry. This slightly changes the way such an entry is configured, but contains mostly semantic changes [where more parameters are gathered in a sub-struct instead of being directly passed]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3f9b4a69 |
|
18-Feb-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed: Lay infrastructure for vlan filtering offload Today, interfaces are working in vlan-promisc mode; But once vlan filtering offloaded would be supported, we'll need a method to control it directly [e.g., when setting device to PROMISC, or when running out of vlan credits]. This adds the necessary API for L2 client to manually choose whether to accept all vlans or only those for which filters were configured. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fc48b7a6 |
|
15-Feb-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed/qede: use 8.7.3.0 FW. This patch moves the qed* driver into utilizing the 8.7.3.0 FW. This new FW is required for a lot of new SW features, including: - Vlan filtering offload - Encapsulation offload support - HW ingress aggregations As well as paving the way for the possibility of adding storage protocols in the future. V2: - Fix kbuild test robot error/warnings. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9df2ed04 |
|
26-Oct-2015 |
Manish Chopra <Manish.Chopra@qlogic.com> |
qed: Add statistics support Device statistics can be gathered on-demand. This adds the qed support for reading the statistics [both function and port] from the device, and adds to the public API a method for requesting the current statistics. Signed-off-by: Manish Chopra <Manish.Chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cc875c2e |
|
26-Oct-2015 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed: Add link support Physical link is handled by the management Firmware. This patch lays the infrastructure for attention handling in the driver, as link change notifications arrive via async. attentions, as well the handling of such notifications. This patch also extends the API with the protocol drivers by adding registered callbacks which the protocol driver passes to qed in order to be notified of async. events originating from the FW/HW. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cee4d264 |
|
26-Oct-2015 |
Manish Chopra <Manish.Chopra@qlogic.com> |
qed: Add slowpath L2 support This patch adds to the qed the support to configure various L2 elements, such as channels and basic filtering conditions. It also enhances its public API to allow qede to later utilize this functionality. Signed-off-by: Manish Chopra <Manish.Chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
25c089d7 |
|
26-Oct-2015 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed: Add basic L2 interface This patch adds a public API for a network driver to work on top of QED. The interface itself is very minimal - it's mostly infrastructure, as the only content it has after this patch is a query for HW-based information required for the creation of a network interface [I.e., no actual protocol-specific configurations are supported]. Signed-off-by: Manish Chopra <Manish.Chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|