nfp: initialize netdev's dev_port with correct id

`dev_port` is used to differentiate devices that instantiate from
the same function, which is the case in most of NFP NICs.

In some customized scenario, `dev_port` is used to rename netdev
instead of `phys_port_name`. Example rules using `dev_port`:

SUBSYSTEM=="net", ACTION=="add", KERNELS=="0000:e1:00.0", ATTR{dev_port}=="0", NAME:="ens8np0"
SUBSYSTEM=="net", ACTION=="add", KERNELS=="0000:e1:00.0", ATTR{dev_port}=="1", NAME:="ens8np1"

To take port split case into account, here we initialize `dev_port`
according to the port sequence in eth_table from management firmware
instead of using port label id directly. And management firmware
makes sure that port sequence matches its label id.

Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20230405120829.28817-1-louis.peens@corigine.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

devlink: pass devlink_port to port_split / port_unsplit callbacks

Now that devlink ports are protected by the instance lock
it seems natural to pass devlink_port as an argument to
the port_split / port_unsplit callbacks.

This should save the drivers from doing a lookup.

In theory drivers may have supported unsplitting ports
which were not registered prior to this change.

Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

eth: nfp: replace driver's "pf" lock with devlink instance lock

The whole reason for existence of the pf mutex is that we could
not lock the devlink instance around port splitting. There are
more types of reconfig which can make ports appear or disappear.
Now that the devlink instance lock is exposed to drivers and
"locked" helpers exist we can switch to using the devlink lock
directly.

Next patches will move the locking inside .port_(un)split to
the core.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfp: reintroduce ndo_get_port_parent_id for representor ports

NFP does not register devlink ports for representors (without
the "devlink: expose PF and VF representors as ports" series
there are no port flavours to expose them as).

Commit c25f08ac65e4 ("nfp: remove ndo_get_port_parent_id implementation")
went to far in removing ndo_get_port_parent_id for representors.
This causes redirection offloads to fail, and switch_id attribute
missing.

Reintroduce the ndo_get_port_parent_id callback for representor ports.

Fixes: c25f08ac65e4 ("nfp: remove ndo_get_port_parent_id implementation")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: remove ndo_get_port_parent_id implementation

Remove implementation of get_port_parent_id ndo and rely on core calling
into devlink for the information directly.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: Remove switchdev.h inclusion

This is no longer necessary after a5084bb71fa4 ("nfp: Implement
ndo_get_port_parent_id()")

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: Implement ndo_get_port_parent_id()

NFP only supports SWITCHDEV_ATTR_ID_PORT_PARENT_ID, which makes it a
great candidate to be converted to use the ndo_get_port_parent_id() NDO
instead of implementing switchdev_port_attr_get().

Since NFP uses switchdev_port_same_parent_id() convert it to use
netdev_port_same_parent_id().

Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: replace long license headers with SPDX

Replace the repeated license text with SDPX identifiers.
While at it bump the Copyright dates for files we touched
this year.

Signed-off-by: Edwin Peer <edwin.peer@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Nic Viljoen <nick.viljoen@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: use split in naming of PCIe PF ports

PCI PFs can host more than one logical endpoint. In NFP terms
this means having more than one vNIC for PCIe PF. The vNICs
are usually corresponding 1:1 to Ethernet ports. In core NIC
we use the legacy idea of vNIC *being* the Ethernet port,
hence netdevs put pX(sY) in their phys_port_name, like Ethernet
ports would. When ASIC ports are fully represented we need to
be able to name different PCIe PF ports, too. Use a scheme
similar to Ethernet ports - pfXsY, for PCIe PF number X,
sub-port Y.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: abm: force Ethternet port up

Current control firmware does not cater too well to multi-host
applications. There is no way to check which hosts are up or
otherwise negotiate what the state of the external port (the
Ethernet port) should be. Make sure the link is up when driver
loads, and don't take it down when Ethernet port netdev is
closed.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: forbid disabling hw-tc-offload on representors while offload active

All netdevs which can accept TC offloads must implement
.ndo_set_features(). nfp_reprs currently do not do that, which
means hw-tc-offload can be turned on and off even when offloads
are active.

Whether the offloads are active is really a question to nfp_ports,
so remove the per-app tc_busy callback indirection thing, and
simply count the number of offloaded items in nfp_port structure.

Fixes: 8a2768732a4d ("nfp: provide infrastructure for offloading flower based TC filters")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Tested-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: store pointer to MAC statistics in nfp_port

Store pointer to device memory containing MAC statistics
in nfp_port. This simplifies representor code and will
be used to dump those statistics in ethtool as well.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: get rid of struct tc_to_netdev

Get rid of struct tc_to_netdev which is now just unnecessary container
and rather pass per-type structures down to drivers directly.
Along with that, consolidate the naming of per-type structure variables
in cls_*.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: push cls related args into cls_common structure

As ndo_setup_tc is generic offload op for whole tc subsystem, does not
really make sense to have cls-specific args. So move them under
cls_common structurure which is embedded in all cls structs.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: make type an argument for ndo_setup_tc

Since the type is always present, push it to be a separate argument to
ndo_setup_tc. On the way, name the type enum and use it for arg type.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: set config bit (ifup/ifdown) on netdev open/close

When a netdev (PF netdev or representor) is opened or closed, set the
physical port config bit appropriately - which powers UP/DOWN the PHY
module for the physical interface.

The PHY is powered first in the HW/FW configuration step when opening
the netdev and again last in the HW/FW configuration step when closing
the netdev.

This is only applicable when there is a physical port associated with
the netdev and if the NSP support this. Otherwise we silently ignore
this step.

The 'nfp_eth_set_configured' can actually return positive values -
updated the function documentation appropriately.

Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: improve order of interfaces in breakout mode

For historical reasons we enumerate the vNICs in order. This means
that if user configures breakout on a multiport card, the first
interface of the second port will have its MAC address changed.

What's worse, when moved from static information (HWInfo) to using
management FW (NSP), more features started depending on the port ids.
Right now in case of breakout first subport of the second port and
second subport of the first port will have their link info swapped.

Revise the ordering scheme so that first subport maintains its address.
Side effect of this change is that we will use base lane ids in
devlink (i.e. 40G ports will be 4 ids apart), e.g.:

pci/0000:04:00.0/0: type eth netdev p6p1
pci/0000:04:00.0/4: type eth netdev p6p2

Note that behaviour of phys_port_id is not changed since there is
a separate id number for the subport there.

Fixes: ec8b1fbe682d ("nfp: support port splitting via devlink")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: provide infrastructure for offloading flower based TC filters

Adds a flower based TC offload handler for representor devices, this
is in addition to the bpf based offload handler. The changes in this
patch will be used in a follow-up patch to add tc flower offload to
the NFP.

The flower app enables tc offloads on representors by default.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: add phys_switch_id support

Add phys_switch_id support by allowing lookup of
SWITCHDEV_ATTR_ID_PORT_PARENT_ID via the nfp_repr_port_attr_get
switchdev operation.

This is visible to user-space in the phys_switch_id attribute
of a netdev.

e.g.

cd /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0
find . -name phys_switch_id | xargs grep .
./net/eth3/phys_switch_id:00154d1300bd
./net/eth4/phys_switch_id:00154d1300bd
./net/eth2/phys_switch_id:00154d1300bd
grep: ./net/eth5/phys_switch_id: Operation not supported

In the above eth2 and eth3 and representor netdevs for the first and second
physical port. eth4 is the representor for the PF. And eth5 is the PF netdev.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: wire get_phys_port_name on representors

Make nfp_port_get_phys_port_name() support new port types and
wire it up to representors' struct net_device_ops.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: allow converting representor's netdev into nfp_port

Based on struct net_device_ops figure out if netdev is a nfp_repr.
Use this knowledge to convert netdev directly to nfp_port.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: move physical port init into a helper

Move MAC/PHY port init into a helper to make it easier to reuse
it in the representor code.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: support port splitting via devlink

Add support for configuring port split with devlink. Add devlink
callbacks to validate requested config and call NSP helpers.
Getting the right nfp_port structure can be done with simple iteration.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: refresh port state before reporting autonegotiation

State of autonegotiation may have changed but is not yet refreshed.
Make sure ethtool respects the NFP_PORT_CHANGED flag when looking
at autoneg.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: provide linking on port structures

Add link to nfp_ports to make it possible to iterate over all ports.
This will come in handy when some ports may be representors.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: introduce nfp_port

Encapsulate port information into struct nfp_port. nfp_port will
soon be extended to contain devlink_port information. It also makes
it easier to reuse port-related code between vNICs and representors.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>