nfp: avoid unnecessary check warnings in nfp_app_get_vf_config

nfp_net_sriov_check is added in nfp_app_get_vf_config which intends
to ensure ivi->vlan_proto and ivi->max_tx_rate/min_tx_rate can be
read from VF config table only when firmware supports corresponding
capability.

However, "nfp_app_get_vf_config" can be called by commands like
"ip a", "ip link set $DEV up" and "ip link set $DEV vf $NUM vlan
$param" (with VF). When using commands above, many warnings
"ndo_set_vf_<cap_x> not supported" would appear if firmware doesn't
support VF rate limit and 802.1ad VLAN assingment. If more VFs are
created, things could get worse.

Thus, this patch add an extra bool parameter for nfp_net_sriov_check
to enable/disable the cap check warning report. Unnecessary warnings
in nfp_app_get_vf_config can be avoided. Valid warnings in kinds of
vf setting function can be reserved.

Fixes: e0d0e1fdf1ed ("nfp: VF rate limit support")
Fixes: 59359597b010 ("nfp: support 802.1ad VLAN assingment to VF")
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfp: VF rate limit support

Add VF rate limit feature

This patch enhances the NFP driver to supports assignment of
both max_tx_rate and min_tx_rate to VFs

The template of configurations below is all supported.
e.g.
# ip link set $DEV vf $VF_NUM max_tx_rate $RATE_VALUE
# ip link set $DEV vf $VF_NUM min_tx_rate $RATE_VALUE
# ip link set $DEV vf $VF_NUM max_tx_rate $RATE_VALUE \
min_tx_rate $RATE_VALUE
# ip link set $DEV vf $VF_NUM min_tx_rate $RATE_VALUE \
max_tx_rate $RATE_VALUE

The max RATE_VALUE is limited to 0xFFFF which is about
63Gbps (using 1024 for 1G)

Signed-off-by: Bin Chen <bin.chen@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

nfp: support 802.1ad VLAN assingment to VF

The NFP driver already supports assignment of 802.1Q VLANs to VFs

e.g.
# ip link set $DEV vf $VF_NUM vlan $VLAN_ID [proto 802.1Q]

This patch enhances the NFP driver to also allow assingment of
802.1ad VLANs to VFs.

e.g.
# ip link set $DEV vf $VF_NUM vlan $VLAN_ID proto 802.1ad

Signed-off-by: Bin Chen <bin.chen@corigine.com>
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Yinjun Zhang <yunjin.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: add SR-IOV trusted VF support

By default VFs are not trusted. Add ndo_set_vf_trust support to toggle
a new per-VF bit. Coupled with FW with this capability allows a
trusted VF to change its MAC even after being administratively set by
the PF. Also populate the trusted field on ndo_get_vf_config. Add the
same ndo to the representors.

Signed-off-by: Pablo Cascón <pablo.cascon@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: replace long license headers with SPDX

Replace the repeated license text with SDPX identifiers.
While at it bump the Copyright dates for files we touched
this year.

Signed-off-by: Edwin Peer <edwin.peer@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Nic Viljoen <nick.viljoen@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: inform the VF driver needs to be restarted after changing the MAC

Add message to inform the VF MAC was changed and the need to restart
the VF driver for the changes to be effective.

Signed-off-by: Pablo Cascón <pablo.cascon@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: add basic SR-IOV ndo functions

Add basic ndo_set/get_vf to support SR-IOV.

VF to egress phy static mapping by now.

Use vfcfg ABI version 2 to write the info to the FW and collect
the return value from the mailbox.

Signed-off-by: Pablo Cascón <pablo.cascon@netronome.com>
Signed-off-by: Jimmy Kizito <jimmy.kizito@netronome.com>
Signed-off-by: Rami Tomer <rami.tomer@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>