nfp: support UDP segmentation offload

The device supports UDP hardware segmentation offload, which helps
improving the performance. Thus, this patch adds support for UDP
segmentation offload from the driver side.

Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: using napi_build_skb() to replace build_skb()

The napi_build_skb() can reuse the skb in skb cache per CPU or
can allocate skbs in bulk, which helps improve the performance.

Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://lore.kernel.org/r/20231026080058.22810-1-louis.peens@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfp: fix incorrectly set csum flag for nfd3 path

The csum flag of IPsec packet are set repeatedly. Therefore, the csum
flag set of IPsec and non-IPsec packet need to be distinguished.

As the ipv6 header does not have a csum field, so l3-csum flag is not
required to be set for ipv6 case.

L4-csum flag include the tcp csum flag and udp csum flag, we shouldn't
set the udp and tcp csum flag at the same time for one packet, should
set l4-csum flag according to the transport layer is tcp or udp.

Fixes: 57f273adbcd4 ("nfp: add framework to support ipsec offloading")
Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: support IPsec offloading for NFP3800

Add IPsec offloading support for NFP3800. Include data
plane and control plane.

Data plane: add IPsec packet process flow in NFP3800
datapath (NFDk).

Control plane: add an algorithm support distinction flow
in xfrm hook function xdo_dev_state_add(), as NFP3800 has
a different set of IPsec algorithm support.

This matches existing support for the NFP6000/NFP4000 and
their NFD3 datapath.

In addition, fixup the md_bytes calculation for NFD3 datapath
to make sure the two datapahts are keept in sync.

Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230208091000.4139974-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfp: add framework to support ipsec offloading

A new metadata type and config structure are introduced to
interact with firmware to support ipsec offloading. This
feature relies on specific firmware that supports ipsec
encrypt/decrypt by advertising related capability bit.

The xfrm callbacks which interact with upper layer are
implemented in the following patch.

Based on initial work of Norm Bagley <norman.bagley@netronome.com>.

Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: support TX VLAN ctag insert

Add support for TX VLAN ctag insert
which may be configured via ethtool.

e.g.
# ethtool -K $DEV tx-vlan-offload on

The NIC supplies VLAN insert information as packet metadata.
The fields of this VLAN metadata are gotten from sk_buff, including
vlan_proto and vlan tag.

Configuration control bit NFP_NET_CFG_CTRL_TXVLAN_V2 is to
signal availability of ctag-insert features of the firmware.

NFDK is used to communicate via PCIE to NFP-3800 based NICs
while NFD3 is used for other NICs supported by the NFP driver.
The metadata format on tx side of NFD3 is different from NFDK.
This feature is not currently implemented for NFDK.

Signed-off-by: Diana Wang <na.wang@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: support RX VLAN ctag/stag strip

Add support for RX VLAN ctag/stag strip
which may be configured via ethtool.

e.g.
# ethtool -K $DEV rx-vlan-offload on
# ethtool -K $DEV rx-vlan-stag-hw-parse on

Ctag-stripped and stag-stripped cannot be enabled at the same time
because currently the kernel supports only one layer of VLAN stripping.

The NIC supplies VLAN strip information as packet metadata.
The fields of this VLAN metadata are:

* strip flag: 1 for stripped; 0 for unstripped
* tci: VLAN TCI ID
* tpid: 1 for ETH_P_8021AD; 0 for ETH_P_8021Q

Configuration control bits NFP_NET_CFG_CTRL_RXVLAN_V2 and
NFP_NET_CFG_CTRL_RXQINQ are to signal availability of
ctag-strip and stag-strip features of the firmware.

Signed-off-by: Diana Wang <na.wang@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: add skb_[inner_]tcp_all_headers helpers

Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)"
to compute headers length for a TCP packet, but others
use more convoluted (but equivalent) ways.

Add skb_tcp_all_headers() and skb_inner_tcp_all_headers()
helpers to harmonize this a bit.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: support 48-bit DMA addressing for NFP3800

48-bit DMA addressing is supported in NFP3800 HW and implemented
in NFDK firmware, so enable this feature in driver now. Note that
with this change, NFD3 firmware, which doesn't implement 48-bit
DMA, cannot be used for NFP3800 any more.

RX free list descriptor, used by both NFD3 and NFDK, is also modified
to support 48-bit DMA. That's OK because the top bits is always get
set to 0 when assigned with 40-bit address.

Based on initial work of Jakub Kicinski <jakub.kicinski@netronome.com>.

Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: use TX ring pointer write back

Newer versions of the PCIe microcode support writing back the
position of the TX pointer back into host memory. This speeds
up TX completions, because we avoid a read from device memory
(replacing PCIe read with DMA coherent read).

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: use callbacks for slow path ring related functions

To reduce the coupling of slow path ring implementations and their
callers, use callbacks instead.

Changes to Jakub's work:
* Also use callbacks for xmit functions

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: move the fast path code to separate files

In preparation for support for a new datapath format move all
ring and fast path logic into separate files. It is basically
a verbatim move with some wrapping functions, no new structures
and functions added.

The current data path is called NFD3 from the initial version
of the driver ABI it used. The non-fast path, but ring related
functions are moved to nfp_net_dp.c file.

Changes to Jakub's work:
* Rebase on xsk related code.
* Split the patch, move the callback changes to next commit.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>