net/mlx5: Remove SF table reference counting

Historically, the SF table reference counting was present in order to
protect parallel executions of devlink ops. However, since currently
this is protected with devlink instance lock, the SF table reference
counting is no longer needed. Remove it entirely.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Push common deletion code into mlx5_sf_del()

Don't call the same functions for SF deletion on multiple places.
Instead, introduce a helper mlx5_sf_del() and move the code there.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Rename mlx5_sf_deactivate_all() to mlx5_sf_del_all()

The function does not do deactivation, but it deletes all SFs instead.
Rename accordingly.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Move state lock taking into mlx5_sf_dealloc()

Instead of taking lock and calling mlx5_sf_dealloc(), move the lock
taking into mlx5_sf_dealloc(). The other caller of mlx5_sf_dealloc()
does not need it now, but will need it after a follow-up patch removing
the table reference counting.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Convert SF port_indices xarray to function_ids xarray

No need to lookup for sf by a port index. Convert the xarray to have
function id as an index and optimize the remaining function id
based lookup.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Use devlink port pointer to get the pointer of container SF struct

Benefit from the fact that struct devlink_port is eventually embedded
in struct mlx5_sf and use container_of() macro to get it instead of the
xarray lookup in every devlink port op.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Call mlx5_sf_id_erase() once in mlx5_sf_dealloc()

Before every call of mlx5_sf_dealloc(), there is a call to
mlx5_sf_id_erase(). So move it to the beginning of mlx5_sf_dealloc().
Also remove redundant mlx5_sf_id_erase() call from mlx5_sf_free()
as it is called only from mlx5_sf_dealloc().

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: SF, Implement peer devlink set for SF representor devlink port

Benefit from the existence of internal mlx5 notifier and extend it by
event MLX5_DRIVER_EVENT_SF_PEER_DEVLINK. Use this event from SF
auxiliary device probe/remove functions to pass the registered SF
devlink instance to the SF representor.

Process the new event in SF representor code and call
devl_port_fn_devlink_set() to do the assignments. Implement this in work
to avoid possible deadlock when probe/remove function of SF may be
called with devlink instance lock held during devlink reload.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5: Embed struct devlink_port into driver structure

Struct devlink_port is usually embedded in a driver-specific struct
which allows to carry driver context to devlink port ops.

Introduce a container struct to include devlink_port struct
in preparation to also include driver context for devlink port ops.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Introduce mlx5_eswitch_load/unload_sf_vport() and use it from SF code

Similar to the PF/VF helpers, introduce a set of load/unload helpers
for SF vports. From there, call mlx5_eswitch_load/unload_vport() which
are common for PFs/VFs and newly introduced SF helpers.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Remove unused ecpu field from struct mlx5_sf_table

"ecpu" field in struct mlx5_sf_table is not used anywhere. Remove it.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

devlink: bring port new reply back

In the offending fixes commit I mistakenly removed the reply message of
the port new command. I was under impression it is a new port
notification, partly due to the "notify" in the name of the helper
function. Bring the code sending reply with new port message back, this
time putting it directly to devlink_nl_cmd_port_new_doit()

Fixes: c496daeb8630 ("devlink: remove duplicate port notification")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230531142025.2605001-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: pass devlink_port pointer to ops->port_del() instead of index

Historically there was a reason why port_dev() along with for example
port_split() did get port_index instead of the devlink_port pointer.
With the locking changes that were done which ensured devlink instance
mutex is hold for every command, the port ops could get devlink_port
pointer directly. Change the forgotten port_dev() op to be as others
and pass devlink_port pointer instead of port_index.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

devlink: remove duplicate port notification

The notification about created port is send from devl_port_register()
function called from ops->port_new(). No need to send it again here,
so remove the call and the helper function.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

devlink: Hold the instance lock in port_new / port_del callbacks

Let the core take the devlink instance lock around port_new and port_del
callbacks and remove the now redundant locking in the only driver that
currently use them.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/mlx5: Use devl_ API in mlx5_esw_devlink_sf_port_register

The function mlx5_esw_devlink_sf_port_register() calls
devlink_port_register() and devlink_rate_leaf_create(). Use devl_ API to
call devl_port_register() and devl_rate_leaf_create() accordingly and
add devlink instance lock in driver paths to this function.

Similarly, use devl_ API to call devl_port_unregister() and
devl_rate_leaf_destroy() in mlx5_esw_devlink_sf_port_unregister() and
ensure locking devlink instance lock on all the paths to this function
too.

This will be used by the downstream patch to invoke
mlx5_devlink_eswitch_mode_set() with devlink lock held.

Note this patch is taking devlink lock on mlx5_devlink_sf_port_new/del()
which are devlink callbacks for port_new/del(). We will take these locks
off once these callbacks will be locked by devlink too.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/mlx5: E-switch, Remove dependency between sriov and eswitch mode

Currently, there are three eswitch modes, none, legacy and switchdev.
None is the default mode. Remove redundant none mode as eswitch mode
should always be either legacy mode or switchdev mode.

With this patch, there are two behavior changes:

1. Legacy becomes the default mode. When querying eswitch mode using
devlink, a valid mode is always returned.
2. When disabling sriov, the eswitch mode will not change, only vfs
are unloaded.

Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: SF, Add SF trace points

Add support for trace events for SFs to improve debugging.
This covers
(a) port add and free trace points
(b) device level trace points
(c) SF hardware context add, free trace points.
(d) SF function activate/deacticate and state trace points

SF events examples:
echo mlx5:mlx5_sf_add >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_free >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_hwc_alloc >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_hwc_free >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_hwc_deferred_free >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_update_state >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_activate >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_deactivate >> /sys/kernel/debug/tracing/set_event

Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Introduce new device index wrapper

Downstream patches.

Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Fix typo in comments

Fix typo:
*vectores ==> vectors
*realeased ==> released
*erros ==> errors
*namepsace ==> namespace
*trafic ==> traffic
*proccessed ==> processed
*retore ==> restore
*Currenlty ==> Currently
*crated ==> created
*chane ==> change
*cannnot ==> cannot
*usuallly ==> usually
*failes ==> fails
*importent ==> important
*reenabled ==> re-enabled
*alocation ==> allocation
*recived ==> received
*tanslation ==> translation

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

devlink: Simplify devlink port API calls

Devlink port already has pointer to the devlink instance and all API
calls that forward these devlink ports to the drivers perform same
"devlink_port->devlink" assignment before actual call.

This patch removes useless parameter and allows us in the future
to create specific devlink_port_ops to manage user space access with
reliable ops assignment.

Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5: SF, Fix show state inactive when its inactivated

When a SF is inactivated and when it is in a TEARDOWN_REQUEST
state, driver still returns its state as active. This is incorrect.
Fix it by treating TEARDOWN_REQEUST as inactive state. When a SF
is still attached to the driver, on user request to reactivate EINVAL
error is returned. Inform user about it with better code EBUSY and
informative error message.

Fixes: 6a3273217469 ("net/mlx5: SF, Port function state change support")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: SF, Extend SF table for additional SF id range

Extended the SF table to cover additioanl SF id range of external
controller.

A user optionallly provides the external controller number when user
wants to create SF on the external controller.

An example on eswitch system:
$ devlink dev eswitch set pci/0033:01:00.0 mode switchdev

$ devlink port show
pci/0033:01:00.0/196607: type eth netdev enP51p1s0f0np0 flavour physical port 0 splittable false
pci/0033:01:00.0/131072: type eth netdev eth0 flavour pcipf controller 1 pfnum 0 external true splittable false
function:
hw_addr 00:00:00:00:00:00

$ devlink port add pci/0033:01:00.0 flavour pcisf pfnum 0 sfnum 77 controller 1
pci/0033:01:00.0/163840: type eth netdev eth1 flavour pcisf controller 1 pfnum 0 sfnum 77 external true splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached

Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: SF, Rely on hw table for SF devlink port allocation

Supporting SF allocation is currently checked at two places:
(a) SF devlink port allocator and
(b) SF HW table handler.

Both layers are using HCA CAP to identify it using helper routine
mlx5_sf_supported() and mlx5_sf_max_functions().

Instead, rely on the HW table handler to check if SF is supported
or not.

Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: SF, Reuse stored hardware function id

SF's hardware function id is already stored in mlx5_sf. Reuse it,
instead of querying the hw table.

Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: remove unneeded semicolon

Fix the following coccicheck warnings:

./drivers/net/ethernet/mellanox/mlx5/core/sf/devlink.c:495:2-3: Unneeded
semicolon.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: SF, Port function state change support

Support changing the state of the SF port's function through devlink.
When activating the SF port's function, enable the hca in the device
followed by adding its auxiliary device.
When deactivating the SF port's function, delete its auxiliary device
followed by disabling the vHCA.

Port function attributes get/set callbacks are invoked with devlink
instance lock held. Such callbacks need to synchronize with sf port
table getting disabled either via sriov sysfs callback. Such callbacks
synchronize with table disable context holding table refcount.

$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev

$ devlink port show
pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false

$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
pci/0000:06:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached

$ devlink port show ens2f0npf0sf88
pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
function:
hw_addr 00:00:00:00:88:88 state inactive opstate detached

$ devlink port function set pci/0000:06:00.0/32768 hw_addr 00:00:00:00:88:88 state active

$ devlink port show ens2f0npf0sf88 -jp
{
"port": {
"pci/0000:06:00.0/32768": {
"type": "eth",
"netdev": "ens2f0npf0sf88",
"flavour": "pcisf",
"controller": 0,
"pfnum": 0,
"sfnum": 88,
"external": false,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:88:88",
"state": "active",
"opstate": "attached"
}
}
}
}

On port function activation, an auxiliary device is created in below
example.

$ devlink dev show
devlink dev show auxiliary/mlx5_core.sf.4

$ devlink port show auxiliary/mlx5_core.sf.4/1
auxiliary/mlx5_core.sf.4/1: type eth netdev p0sf88 flavour virtual port 0 splittable false

Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: SF, Add port add delete functionality

To handle SF port management outside of the eswitch as independent
software layer, introduce eswitch notifier APIs so that mlx5 upper
layer who wish to support sf port management in switchdev mode can
perform its task whenever eswitch mode is set to switchdev or before
eswitch is disabled.

Initialize sf port table on such eswitch event.

Add SF port add and delete functionality in switchdev mode.
Destroy all SF ports when eswitch is disabled.
Expose SF port add and delete to user via devlink commands.

$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev

$ devlink port show
pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false

$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
pci/0000:06:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached

$ devlink port show ens2f0npf0sf88
pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached

or by its unique port index:
$ devlink port show pci/0000:06:00.0/32768
pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached

$ devlink port show ens2f0npf0sf88 -jp
{
"port": {
"pci/0000:06:00.0/32768": {
"type": "eth",
"netdev": "ens2f0npf0sf88",
"flavour": "pcisf",
"controller": 0,
"pfnum": 0,
"sfnum": 88,
"external": false,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:00:00",
"state": "inactive",
"opstate": "detached"
}
}
}
}

Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>