net: marvell: Fixed two spellings,controling to controlling and oen to one

s/oen/one/
s/controling/controlling/

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210112103152.13222-1-unixbhaskar@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mvpp2: cls: Add steering based on vlan Id and priority.

This commit allows using the vlan Id and priority as parts of the key
for classification offload. These fields are extracted from the
outermost tag, if multiple tags are present.

Vlan Id and priority are considered as 2 different fields by the
classifier, however the fields are both appended in the Header Extracted
Key in the same layout as they are found in the tags. This means that
when steering only based on the prio, a 16-bit slot is still taken in
the HEK.

The classifier doesn't allow extracting the DEI bit from the tag, so we
explicitly prevent user from using this bit in the key.

This commit adds the vlan priotity as a compatible HEK field for
tagged traffic, meaning that we limit the possibility of extracting this
field only to the flows that contain tagged traffic.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: cls: Use a dedicated lu_type for the RSS lookup

When performing a TCAM lookup in the C2 engine, it's possible that
multiple entries match the packet. To make sure the correct entry match
when performing a lookup, the Flow Table can set a lookup type, which
will be used in the TCAM lookup, thus preventing such false-positives.

We need to make sure the RSS match doesn't interfere with other
classification lookups, hence we use a dedicated lookup_type for it.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: cls: Use RSS contexts to handle RSS tables

The PPv2 controller has 8 RSS tables that are shared across all ports on
a given PPv2 instance. The previous implementation allocated one table
per port, leaving others unused.

By using RSS contexts, we can make use of multiple RSS tables per
port, one being the default table (always id 0), the other ones being
used as destinations for flow steering, in the same way as rx rings.

This commit introduces RSS contexts management in the PPv2 driver. We
always reserve one table per port, allocated when the port is probed.

The global table list is stored in the struct mvpp2, as it's a global
resource. Each port then maintains a list of indices in that global
table, that way each port can have it's own numbering scheme starting
from 0.

One limitation that seems unavoidable is that the hashing parameters are
shared across all RSS contexts for a given port. Hashing parameters for
ctx 0 will be applied to all contexts.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: cls: Allow dropping packets with classification offload

This commit introduces support for the "Drop" action in classification
offload. This corresponds to the "-1" action with ethtool -N.

This is achieved using the color marking actions available in the C2
engine, which associate a color to a packet. These colors can be either
Green, Yellow or Red, Red meaning that the packet should be dropped.

Green and Yellow colors are interpreted by the Policer, which isn't
supported yet.

This method of dropping using the Classifier is different than the
already existing early-drop features, such as VLAN filtering and MAC
UC/MC filtering, which are performed during the Parsing step, and
therefore take precedence over classification actions.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: cls: Add Classification offload support

This commit introduces basic classification offloading support for the
PPv2 controller.

The PPv2 classifier has many classification engines, for now we only use
the C2 TCAM match engine.

This engine allows to perform ternary lookups on 64 bits keys (called
Header Extracted Key), that are built by extracting fields from the packet
header and concatenating them. At most 4 fields can be extracted for a
single lookup.

This basic implementation allows to build the HEK from the following
fields :
- L4 source and destination ports (for UDP and TCP)

More fields are to be added in the future.

Classification flows are added through the ethtool interface, using the
newly introduced flow_rule infrastructure as an internal rule
representation, allowing to more easily implement tc flower rules if
need be.

The internal design for now allocates one range of 4 rules per port
due to the internal design of the flow table, which uses 22 sub-flows.

When inserting a classification rule, the rule is created in every
relevant sub-flow.

This low rule-count is a very simple design which reaches quickly the
limitations of the flow table ordering, but guarantees that the rule
ordering will always be respected.

This commit only introduces support for the "steer to rxq" action.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: cls: Use a bitfield to represent the flow_type

As of today, the classification code is used only for RSS. We split the
incoming traffic into multiple flows, that correspond to the ethtool
flow_type parameter.

We don't want to use the ethtool flow definitions such as TCP_V4_FLOW,
for several reason :

- We want to decorrelate the driver code from ethtool as much as
possible, so that we can easily use other interfaces such as tc flower,

- We want the flow_type to be a bitfield, so that we can match flows
embedded into each other, such as TCP4 which is a subset of IP4.

This commit does the conversion to the newer type.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: cls: Rework C2 engine macros

The C2 classification engine has a 256 entry TCAM, used for ternary
matches on an 8 byte Header Extracted Key. For now, we compute the
various indices for classification and RSS that use this engine thanks
to a set of macros.

This commit mainly renames the macros used to make it clear that they
should be used with the C2 engine, but also make use of the full 256
entries in the engine. For now, the C2 entries are only used for RSS.

These entries are put at the end of the TCAM range, in case we want to
add higher priority matches later on.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: cls: Invalidate all C2 entries except the ones we use

C2 TCAM entries can be invalidated to avoid unwanted matches. Make sure
all entries are invalidated at init, then validate only the ones we use.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: cls: Rename the flow table macros

The Flow Table dictates what lookups will be issued for each flow type.
The lookup sequence for each flow is similar, and the index of each
lookup is computed by some macros.

There are similar mechanisms for the C2 TCAM lookups, so in order to
avoid confusion, rename the flow table index computing macros with a
common prefix.

The only difference in behaviour is that we now use the very first entry
in the flow for the RSS lookup (the first entry was previously unused).

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: cls: Don't use the sequence attribute for classification

The classifier allows to combine multiple lookups in one "sequence" that
is counted as a single lookup to an engine, with a single result.

We don't actually use that feature, so remove any places where we set
this field, so that the classifier doesn't try to interpret these
fields.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: cls: Rename classifer per-port functions

This commit renames some of the classifier functions to follow the
naming 'mvpp2_port_*' that's used for function that act on a given port.

This commit is purely cosmetic.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: cls: Use iterators to go through the cls_table

The cls_table is a global read-only table containing the different
parameters that are used by various tables in the classifier. It
describes the links between the Header Parser, the decoding table and
the flow_table.

There are several possible way we want to iterate over that table,
depending on wich classifier engine we want to configure. For the Header
Parser, we want to iterate over each entry. For the Decoding table, we
want to iterate over each entry having a unique flow_id. Finally, when
configuring an ethtool flow, we want to iterate over each entry having a
unique flow_id and that has a given flow_type.

This commit introduces some iterator to both provide syntactic sugar and
also clarify the way we want to iterate over the table.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: cls: Make the flow definitions const

The cls_flow table represent the overall configuration of the
classifier, used to match the different traffic classes in the Parsing
and Classification engines.

This configuration is static, and applies to all PPv2 instances, we must
therefore keep it const so that no modifications of this table are
performed at runtime.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: cls: Rename MVPP2_N_FLOWS to MVPP2_N_PRS_FLOWS

The macro definition MVPP2_N_FLOWS is ambiguous because it really
represents the number of entries in the Header Parser that are used to
identify the classification flows.

Rename the macro to clearly state that we represent the number of flows
in the Header Parser.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: cls: use Lookup Type in classification engines

The PPv2 classifier allows to perform multiple lookups on the same
engine when classifying a packet. These lookups can match similar parts
of a packet header, but perform different actions upon matching. To
differentiate these types of lookups, it's possible to specify a Lookup
Type in the flow table entries, which will be part of the key for the
lookup engines.

This commit introduces the use of Lookup Types for C2 matches. Since for
now we only perform C2 lookups to enable RSS, we only need one Lookup
Type.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: cls: Start cls flow entries from beginning of table

The Classifier flow table has 512 entries, that contains lookups
commands executed consecutively for every flow. Since we have 21
different flows, we have to carefully manage the flow table use.

As of today, the start index of a lookup sequence is computed
directly based in the flow->id. There are 8 reserved flow ids, from
0-7, which don't have any corresponding sequence in the flow table. We
can therefore ignore them when computing the index, and make so that the
first non-reserved flow point to the very beginning of the flow table.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Suggested-by: Alan Winkowski <walan@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: debugfs: add classifier hit counters

The classification operations that are used for RSS make use of several
lookup tables. Having hit counters for these tables is really helpful
to determine what flows were matched by ingress traffic, and see the
path of packets among all the classifier tables.

This commit adds hit counters for the 3 tables used at the moment :

- The decoding table (also called lookup_id table), that links flows
identified by the Header Parser to the flow table.

There's one entry per flow, located at :
.../mvpp2/<controller>/flows/XX/dec_hits

Note that there are 21 flows in the decoding table, whereas there are
52 flows in the Header Parser. That's because there are several kind
of traffic that will match a given flow. Reading the hit counter from
one sub-flow will clear all hit counter that have the same flow_id.

This also applies to the flow_hits.

- The flow table, that contains all the different lookups to be
performed by the classifier for each packet of a given flow. The match
is done on the first entry of the flow sequence.

- The C2 engine entries, that are used to assign the default rx queue,
and enable or disable RSS for a given port.

There's one entry per flow, located at:
.../mvpp2/<controller>/flows/XX/flow_hits

There is one C2 entry per port, so the c2 hit counter is located at :
.../mvpp2/<controller>/ethX/c2_hits

All hit counter values are 16-bits clear-on-read values.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: debugfs: add entries for classifier flows

The classifier configuration for RSS is quite complex, with several
lookup tables being used. This commit adds useful info in debugfs to
see how the different tables are configured :

Added 2 new entries in the per-port directory :

- .../eth0/default_rxq : The default rx queue on that port
- .../eth0/rss_enable : Indicates if RSS is enabled in the C2 entry

Added the 'flows' directory :

It contains one entry per sub-flow. a 'sub-flow' is a unique path from
Header Parser to the flow table. Multiple sub-flows can point to the
same 'flow' (each flow has an id from 8 to 29, which is its index in the
Lookup Id table) :

- .../flows/00/...
/01/...
...
/51/id : The flow id. There are 21 unique flows. There's one
flow per combination of the following parameters :
- L4 protocol (TCP, UDP, none)
- L3 protocol (IPv4, IPv6)
- L3 parameters (Fragmented or not)
- L2 parameters (Vlan tag presence or not)
.../type : The flow type. This is an even higher level flow,
that we manipulate with ethtool. It can be :
"udp4" "tcp4" "udp6" "tcp6" "ipv4" "ipv6" "other".
.../eth0/...
.../eth1/engine : The hash generation engine used for this
flow on the given port
.../hash_opts : The hash generation options indicating on
what data we base the hash (vlan tag, src
IP, src port, etc.)

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: switch to SPDX identifiers

Use the appropriate SPDX license identifiers and drop the license text.
This patch is only cosmetic.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: allow setting RSS flow hash parameters with ethtool

This commit allows setting the RSS hash generation parameters from
ethtool. When setting parameters for a given flow type from ethtool
(e.g. tcp4), all the corresponding flows in the flow table are updated,
according to the supported hash parameters.

For example, when configuring TCP over IPv4 hash parameters to be
src/dst IP + src/dst port ("ethtool -N eth0 rx-flow-hash tcp4 sdfn"),
we only set the "src/dst port" hash parameters on the non-fragmented TCP
over IPv4 flows.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: add an RSS classification step for each flow

One of the classification action that can be performed is to compute a
hash of the packet header based on some header fields, and lookup a RSS
table based on this hash to determine the final RxQ.

This is done by adding one lookup entry per flow per port, so that we
can configure the hash generation parameters for each flow and each
port.

There are 2 possible engines that can be used for RSS hash generation :

- C3HA, that generates a hash based on up to 4 header-extracted fields
- C3HB, that does the same as c3HA, but also includes L4 info in the hash

There are a lot of fields that can be extracted from the header. For now,
we only use the ones that we can configure using ethtool :
- DST MAC address
- L3 info
- Source IP
- Destination IP
- Source port
- Destination port

The C3HB engine is selected when we use L4 fields (src/dst port).

Header parser Dec table
Ingress pkt +-------------+ flow id +----------------------------+
------------->| TCAM + SRAM |-------->|TCP IPv4 w/ VLAN, not frag |
+-------------+ |TCP IPv4 w/o VLAN, not frag |
|TCP IPv4 w/ VLAN, frag |--+
|etc. | |
+----------------------------+ |
|
Flow table |
+---------+ +------------+ +--------------------------+ |
| RSS tbl |<--| Classifier |<--------| flow 0: C2 lookup | |
+---------+ +------------+ | C3 lookup port 0 | |
| | | C3 lookup port 1 | |
+-----------+ +-------------+ | ... | |
| C2 engine | | C3H engines | | flow 1: C2 lookup |<--+
+-----------+ +-------------+ | C3 lookup port 0 |
| ... |
| ... |
| flow 51 : C2 lookup |
| ... |
+--------------------------+

The C2 engine also gains the role of enabling and disabling the RSS
table lookup for this packet.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: split ingress traffic into multiple flows

The PPv2 classifier allows to perform classification operations on each
ingress packet, based on the flow the packet is assigned to.

The current code uses only 1 flow per port, and the only classification
action consists of assigning the rx queue to the packet, depending on the
port.

In preparation for adding RSS support, we have to split all incoming
traffic into different flows. Since RSS assigns a rx queue depending on
the hash of some header fields, we have to make sure that the hash is
generated in a consistent way for all packets in the same flow.

What we call a "flow" is actually a set of attributes attached to a
packet that depends on various L2/L3/L4 info.

This patch introduces 52 flows, wich are a combination of various L2, L3
and L4 attributes :
- Whether or not the packet has a VLAN tag
- Whether the packet is IPv4, IPv6 or something else
- Whether the packet is TCP, UDP or something else
- Whether or not the packet is fragmented at L3 level.

The flow is associated to a packet by the Header Parser. Each flow
corresponds to an entry in the decoding table. This entry then points to
the sequence of classification lookups to be performed by the
classifier, represented in the flow table.

For now, the only lookup we perform is a C2 lookup to set the default
rx queue.

Header parser Dec table
Ingress pkt +-------------+ flow id +----------------------------+
------------->| TCAM + SRAM |-------->|TCP IPv4 w/ VLAN, not frag |
+-------------+ |TCP IPv4 w/o VLAN, not frag |
|TCP IPv4 w/ VLAN, frag |--+
|etc. | |
+----------------------------+ |
|
Flow table |
+------------+ +---------------------+ |
To RxQ <---| Classifier |<-------| flow 0: C2 lookup |<--------+
+------------+ | flow 1: C2 lookup |
| | ... |
+------------+ | flow 51 : C2 lookup |
| C2 engine | +---------------------+
+------------+

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: use classifier to assign default rx queue

The PPv2 Controller has a classifier, that can perform multiple lookup
operations for each packet, using different engines.

One of these engines is the C2 engine, which performs TCAM based lookups
on data extracted from the packet header. When a packet matches an
entry, the engine sets various attributes, used to perform
classification operations.

One of these attributes is the rx queue in which the packet should be sent.
The current code uses the lookup_id table (also called decoding table)
to assign the rx queue. However, this only works if we use one entry per
port in the decoding table, which won't be the case once we add RSS
lookups.

This patch uses the C2 engine to assign the rx queue to each packet.

The C2 engine is used through the flow table, which dictates what
classification operations are done for a given flow.

Right now, we have one flow per port, which contains every ingress
packet for this port.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: rename per-port RSS init function

mvpp22_init_rss function configures the RSS parameters for each port, so
rename it accordingly. Since this function relies on classifier
configuration, move its call right after the classifier config.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: RSS indirection table support

This patch adds the RSS indirection table support, allowing to use the
ethtool -x and -X options to dump and set this table.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
[Maxime: Small warning fixes, use one table per port]
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: define the number of RSS entries per table in mvpp2.h

The size of the the RSS indirection tables should be defined in mvpp2.h,
so that we can use it in all files of the PPv2 driver.

This commit moves the define in mvpp2.h, and adds the missing #include
in mvpp2_cls.h.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: Split the PPv2 driver to a dedicated directory

As the mvpp2 driver is growing, move this driver to a dedicated
directory and split it into several files.

Since this driver has a lot of register defines and structure
definitions, it can benefit from having all of this into a dedicated
header file, named mvpp2.h.

A good chunk of the mvpp2 code is dedicated to Header Parser handling, so
we introduce mvpp2_prs.h where all Header Parser definitions are located,
and mvpp2_prs.c containing the related code.

In the same way, mvpp2_cls.h and mvpp2_cls.c are created to contain
Classifier and RSS related code.

The former 'mvpp2.c' file is renamed 'mvpp2_main.c' so that we can keep
the driver binary named 'mvpp2'.

This commit is only about spliting the driver into multiple files and
doesn't introduce any new function, feature or fix besides removing
'static' keywords when needed.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>