idpf: cleanup virtchnl cruft

We can now remove a bunch of gross code we don't need anymore like the
vc state bits and vc_buf_lock since everything is using transaction API
now.

Tested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

idpf: implement virtchnl transaction manager

This starts refactoring how virtchnl messages are handled by adding a
transaction manager (idpf_vc_xn_manager).

There are two primary motivations here which are to enable handling of
multiple messages at once and to make it more robust in general. As it
is right now, the driver may only have one pending message at a time and
there's no guarantee that the response we receive was actually intended
for the message we sent prior.

This works by utilizing a "cookie" field of the message descriptor. It
is arbitrary what data we put in the cookie and the response is required
to have the same cookie the original message was sent with. Then using a
"transaction" abstraction that uses the completion API to pair responses
to the message it belongs to.

The cookie works such that the first half is the index to the
transaction in our array, and the second half is a "salt" that gets
incremented every message. This enables quick lookups into the array and
also ensuring we have the correct message. The salt is necessary because
after, for example, a message times out and we deem the response was
lost for some reason, we could theoretically reuse the same index but
using a different salt ensures that when we do actually get a response
it's not the old message that timed out previously finally coming in.
Since the number of transactions allocated is U8_MAX and the salt is 8
bits, we can never have a conflict because we can't roll over the salt
without using more transactions than we have available.

This starts by only converting the VIRTCHNL2_OP_VERSION message to use
this new transaction API. Follow up patches will convert all virtchnl
messages to use the API.

Tested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Co-developed-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

idpf: add idpf_virtchnl.h

idpf.h is quite heavy. We can reduce the burden a fair bit by
introducing an idpf_virtchnl.h file. This mostly just moves function
declarations but there are many of them. This also makes an attempt to
group those declarations in a way that makes some sense instead of
mishmashed.

Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

idpf: add SRIOV support and other ndo_ops

Add support for SRIOV: send the requested number of VFs
to the device Control Plane, via the virtchnl message
and then enable the VFs using 'pci_enable_sriov'.

Add other ndo ops supported by the driver such as features_check,
set_rx_mode, validate_addr, set_mac_address, change_mtu, get_stats64,
set_features, and tx_timeout. Initialize the statistics task which
requests the queue related statistics to the CP. Add loopback
and promiscuous mode support and the respective virtchnl messages.

Finally, add documentation and build support for the driver.

Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Co-developed-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Co-developed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Madhu Chittim <madhu.chittim@intel.com>
Co-developed-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Phani Burra <phani.r.burra@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

idpf: add singleq start_xmit and napi poll

Add the start_xmit, TX and RX napi poll support for the single queue
model. Unlike split queue model, single queue uses same queue to post
buffer descriptors and completed descriptors.

Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Co-developed-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Co-developed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Madhu Chittim <madhu.chittim@intel.com>
Co-developed-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Phani Burra <phani.r.burra@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

idpf: add create vport and netdev configuration

Add the required support to create a vport by spawning
the init task. Once the vport is created, initialize and
allocate the resources needed for it. Configure and register
a netdev for each vport with all the features supported
by the device based on the capabilities received from the
device Control Plane. Spawn the init task till all the default
vports are created.

Co-developed-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Co-developed-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Co-developed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Madhu Chittim <madhu.chittim@intel.com>
Co-developed-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Phani Burra <phani.r.burra@intel.com>
Co-developed-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com>
Signed-off-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

idpf: add core init and interrupt request

As the mailbox is setup, add the necessary send and receive
mailbox message framework to support the virtchnl communication
between the driver and device Control Plane (CP).

Add the core initialization. To start with, driver confirms the
virtchnl version with the CP. Once that is done, it requests
and gets the required capabilities and resources needed such as
max vectors, queues etc.

Based on the vector information received in 'VIRTCHNL2_OP_GET_CAPS',
request the stack to allocate the required vectors. Finally add
the interrupt handling mechanism for the mailbox queue and enable
the interrupt.

Note: Checkpatch issues a warning about IDPF_FOREACH_VPORT_VC_STATE and
IDPF_GEN_STRING being complex macros and should be enclosed in parentheses
but it's not the case. They are never used as a statement and instead only
used to define the enum and array.

Co-developed-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Co-developed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Co-developed-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Co-developed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Madhu Chittim <madhu.chittim@intel.com>
Co-developed-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Phani Burra <phani.r.burra@intel.com>
Co-developed-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com>
Signed-off-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

idpf: add controlq init and reset checks

At the end of the probe, initialize and schedule the event workqueue.
It calls the hard reset function where reset checks are done to find
if the device is out of the reset. Control queue initialization and
the necessary control queue support is added.

Introduce function pointers for the register operations which are
different between PF and VF devices.

Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Co-developed-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Co-developed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Madhu Chittim <madhu.chittim@intel.com>
Co-developed-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Phani Burra <phani.r.burra@intel.com>
Co-developed-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com>
Signed-off-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

idpf: add module register and probe functionality

Add the required support to register IDPF PCI driver, as well as
probe and remove call backs. Enable the PCI device and request
the kernel to reserve the memory resources that will be used by the
driver. Finally map the BAR0 address space.

Signed-off-by: Phani Burra <phani.r.burra@intel.com>
Co-developed-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Co-developed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Madhu Chittim <madhu.chittim@intel.com>
Co-developed-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com>
Signed-off-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>