#
80bfab79 |
|
29-Feb-2024 |
Eric Dumazet <edumazet@google.com> |
net: adopt skb_network_offset() and similar helpers This is a cleanup patch, making code a bit more concise. 1) Use skb_network_offset(skb) in place of (skb_network_header(skb) - skb->data) 2) Use -skb_network_offset(skb) in place of (skb->data - skb_network_header(skb)) 3) Use skb_transport_offset(skb) in place of (skb_transport_header(skb) - skb->data) 4) Use skb_inner_transport_offset(skb) in place of (skb_inner_transport_header(skb) - skb->data) Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> # for sfc Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5e0a760b |
|
28-Dec-2023 |
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> |
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") has changed the definition of MAX_ORDER to be inclusive. This has caused issues with code that was not yet upstream and depended on the previous definition. To draw attention to the altered meaning of the define, rename MAX_ORDER to MAX_PAGE_ORDER. Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
#
dbd2f3b2 |
|
10-Nov-2023 |
Yonglong Liu <liuyonglong@huawei.com> |
net: hns3: fix variable may not initialized problem in hns3_init_mac_addr() When a VF is calling hns3_init_mac_addr(), get_mac_addr() may return fail, then the value of mac_addr_temp is not initialized. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
09d96ee5 |
|
20-Oct-2023 |
Yunsheng Lin <linyunsheng@huawei.com> |
page_pool: remove PP_FLAG_PAGE_FRAG PP_FLAG_PAGE_FRAG is not really needed after pp_frag_count handling is unified and page_pool_alloc_frag() is supported in 32-bit arch with 64-bit DMA, so remove it. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> CC: Lorenzo Bianconi <lorenzo@kernel.org> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: Liang Chen <liangchen.linux@gmail.com> CC: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20231020095952.11055-3-linyunsheng@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
f9f65126 |
|
18-Sep-2023 |
Jie Wang <wangjie125@huawei.com> |
net: hns3: fix GRE checksum offload issue The device_version V3 hardware can't offload the checksum for IP in GRE packets, but can do it for NvGRE. So default to disable the checksum and GSO offload for GRE, but keep the ability to enable it when only using NvGRE. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
#
60326634 |
|
06-Sep-2023 |
Jie Wang <wangjie125@huawei.com> |
net: hns3: remove GSO partial feature bit HNS3 NIC does not support GSO partial packets segmentation. Actually tunnel packets for example NvGRE packets segment offload and checksum offload is already supported. There is no need to keep gso partial feature bit. So this patch removes it. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
#
61a1deac |
|
06-Sep-2023 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: fix tx timeout issue Currently, the driver knocks the ring doorbell before updating the ring->last_to_use in tx flow. if the hardware transmiting packet and napi poll scheduling are fast enough, it may get the old ring->last_to_use in drivers' napi poll. In this case, the driver will think the tx is not completed, and return directly without clear the flag __QUEUE_STATE_STACK_XOFF, which may cause tx timeout. Fixes: 20d06ca2679c ("net: hns3: optimize the tx clean process") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
#
a9ca9f9c |
|
04-Aug-2023 |
Yunsheng Lin <linyunsheng@huawei.com> |
page_pool: split types and declarations from page_pool.h Split types and pure function declarations from page_pool.h and add them in page_page/types.h, so that C sources can include page_pool.h and headers should generally only include page_pool/types.h as suggested by jakub. Rename page_pool.h to page_pool/helpers.h to have both in one place. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230804180529.2483231-2-aleksander.lobakin@intel.com [Jakub: change microsoft/mana, fix kdoc paths in Documentation] Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
ac6257a3 |
|
07-Aug-2023 |
Yonglong Liu <liuyonglong@huawei.com> |
net: hns3: fix deadlock issue when externel_lb and reset are executed together When externel_lb and reset are executed together, a deadlock may occur: [ 3147.217009] INFO: task kworker/u321:0:7 blocked for more than 120 seconds. [ 3147.230483] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3147.238999] task:kworker/u321:0 state:D stack: 0 pid: 7 ppid: 2 flags:0x00000008 [ 3147.248045] Workqueue: hclge hclge_service_task [hclge] [ 3147.253957] Call trace: [ 3147.257093] __switch_to+0x7c/0xbc [ 3147.261183] __schedule+0x338/0x6f0 [ 3147.265357] schedule+0x50/0xe0 [ 3147.269185] schedule_preempt_disabled+0x18/0x24 [ 3147.274488] __mutex_lock.constprop.0+0x1d4/0x5dc [ 3147.279880] __mutex_lock_slowpath+0x1c/0x30 [ 3147.284839] mutex_lock+0x50/0x60 [ 3147.288841] rtnl_lock+0x20/0x2c [ 3147.292759] hclge_reset_prepare+0x68/0x90 [hclge] [ 3147.298239] hclge_reset_subtask+0x88/0xe0 [hclge] [ 3147.303718] hclge_reset_service_task+0x84/0x120 [hclge] [ 3147.309718] hclge_service_task+0x2c/0x70 [hclge] [ 3147.315109] process_one_work+0x1d0/0x490 [ 3147.319805] worker_thread+0x158/0x3d0 [ 3147.324240] kthread+0x108/0x13c [ 3147.328154] ret_from_fork+0x10/0x18 In externel_lb process, the hns3 driver call napi_disable() first, then the reset happen, then the restore process of the externel_lb will fail, and will not call napi_enable(). When doing externel_lb again, napi_disable() will be double call, cause a deadlock of rtnl_lock(). This patch use the HNS3_NIC_STATE_DOWN state to protect the calling of napi_disable() and napi_enable() in externel_lb process, just as the usage in ndo_stop() and ndo_start(). Fixes: 04b6ba143521 ("net: hns3: add support for external loopback test") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230807113452.474224-5-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
ed1c6f35 |
|
21-Jun-2023 |
Peiyang Wang <wangpeiyang1@huawei.com> |
net: hns3: clear hns unused parameter alarm Several functions in the hns3 driver have unused parameters. The compiler will warn about them when building with -Wunused-parameter option of hns3. Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
#
23baf831 |
|
15-Mar-2023 |
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> |
mm, treewide: redefine MAX_ORDER sanely MAX_ORDER currently defined as number of orders page allocator supports: user can ask buddy allocator for page order between 0 and MAX_ORDER-1. This definition is counter-intuitive and lead to number of bugs all over the kernel. Change the definition of MAX_ORDER to be inclusive: the range of orders user can ask from buddy allocator is 0..MAX_ORDER now. [kirill@shutemov.name: fix min() warning] Link: https://lkml.kernel.org/r/20230315153800.32wib3n5rickolvh@box [akpm@linux-foundation.org: fix another min_t warning] [kirill@shutemov.name: fixups per Zi Yan] Link: https://lkml.kernel.org/r/20230316232144.b7ic4cif4kjiabws@box.shutemov.name [akpm@linux-foundation.org: fix underlining in docs] Link: https://lore.kernel.org/oe-kbuild-all/202303191025.VRCTk6mP-lkp@intel.com/ Link: https://lkml.kernel.org/r/20230315113133.11326-11-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
#
1f5020ac |
|
20-Apr-2023 |
Vladimir Oltean <vladimir.oltean@nxp.com> |
net: vlan: introduce skb_vlan_eth_hdr() Similar to skb_eth_hdr() introduced in commit 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()"), let's introduce a skb_vlan_eth_hdr() helper which can be used in TX-only code paths to get to the VLAN header based on skb->data rather than based on the skb_mac_header(skb). We also consolidate the drivers that dereference skb->data to go through this helper. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c183033f |
|
06-Mar-2023 |
Bjorn Helgaas <bhelgaas@google.com> |
net: hns3: remove unnecessary aer.h include <linux/aer.h> is unused, so remove it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
9adafe2b |
|
04-Feb-2023 |
Vladimir Oltean <vladimir.oltean@nxp.com> |
net/sched: move struct tc_mqprio_qopt_offload from pkt_cls.h to pkt_sched.h Since mqprio is a scheduler and not a classifier, move its offload structure to pkt_sched.h, where struct tc_taprio_qopt_offload also lies. Also update some header inclusions in drivers that access this structure, to the best of my abilities. Cc: Igor Russkikh <irusskikh@marvell.com> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Saeed Mahameed <saeedm@nvidia.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: Steen Hegelund <Steen.Hegelund@microchip.com> Cc: Daniel Machon <daniel.machon@microchip.com> Cc: UNGLinuxDriver@microchip.com Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7d89b53c |
|
21-Dec-2022 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: fix miss L3E checking for rx packet For device supports RXD advanced layout, the driver will return directly if the hardware finish the checksum calculate. It cause missing L3E checking for ip packets. Fixes it. Fixes: 1ddc028ac849 ("net: hns3: refactor out RX completion checksum") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
068c38ad |
|
26-Oct-2022 |
Thomas Gleixner <tglx@linutronix.de> |
net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers). Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
29df7c69 |
|
14-Nov-2022 |
Jie Wang <wangjie125@huawei.com> |
net: hns3: fix return value check bug of rx copybreak The refactoring of rx copybreak modifies the original return logic, which will make this feature unavailable. So this patch fixes the return logic of rx copybreak. Fixes: e74a726da2c4 ("net: hns3: refactor hns3_nic_reuse_page()") Fixes: 99f6b5fb5f63 ("net: hns3: use bounce buffer when rx page can not be reused") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
#
a56cad69 |
|
14-Nov-2022 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: fix incorrect hw rss hash type of rx packet Currently, the HNS3 driver reports the rss hash type of each packet based on the rss hash tuples set. It always reports PKT_HASH_TYPE_L4, without checking the type of current packet. It's incorrect. Fixes it by reporting it base on the packet type. Fixes: 796640778c26 ("net: hns3: support RXD advanced layout") Fixes: 232fc64b6e62 ("net: hns3: Add HW RSS hash information to RX skb") Fixes: ea4858670717 ("net: hns3: handle the BD info on the last BD of the packet") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
#
b48b89f9 |
|
27-Sep-2022 |
Jakub Kicinski <kuba@kernel.org> |
net: drop the weight argument from netif_napi_add We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
dfea275e |
|
15-Sep-2022 |
Guangbin Huang <huangguangbin2@huawei.com> |
net: hns3: optimize converting dscp to priority process of hns3_nic_select_queue() Currently, when function hns3_nic_select_queue() converts dscp to priority, it calls an indirect callback ae_algo->ops->get_dscp_prio to get priority. However as function hns3_nic_select_queue() is in fast path, the indirect call may cause degradation of performance. For optimization, this patch moves dscp_app_cnt and dscp_prio from struct hclge_tm_info to struct hnae3_knic_private_info, so they can be used in both hclge and hns3 layers. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
04b6ba14 |
|
15-Sep-2022 |
Yonglong Liu <liuyonglong@huawei.com> |
net: hns3: add support for external loopback test This patch add support for external loopback test. The successful test need the link is up with duplex full. The driver do external loopback first, and then the whole offline test. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
f6e32724 |
|
06-Sep-2022 |
Guangbin Huang <huangguangbin2@huawei.com> |
net: hns3: support ndo_select_queue() To support tx packets to select queue according to its dscp field after setting dscp and tc map relationship, this patch implements ndo_select_queue() to set skb->priority according to the user's setting dscp and priority map relationship. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
507e46ae |
|
30-Aug-2022 |
Guangbin Huang <huangguangbin2@huawei.com> |
net: hns3: add getting capabilities of gro offload and fd from firmware As some new devices may not support GRO offload and flow table director, to support these devices, driver needs to querying capabilities of GRO offload and flow table director from firmware. Whether the driver supports these two features depends on capabilities. For old device of version HNAE3_DEVICE_VERSION_V2, driver sets their capabilities of these two features to fixed value. Setting default features of netdev and debugfs also need to identify whether support these two features. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
504148fe |
|
30-Jun-2022 |
Eric Dumazet <edumazet@google.com> |
net: add skb_[inner_]tcp_all_headers helpers Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)" to compute headers length for a TCP packet, but others use more convoluted (but equivalent) ways. Add skb_tcp_all_headers() and skb_inner_tcp_all_headers() helpers to harmonize this a bit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
286c61e7 |
|
18-Apr-2022 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: add ethtool parameter check for CQE/EQE mode For DEVICE_VERSION_V2, the hardware does not support the CQE mode. So add capability bit for coalesce CQE mode and add parameter check for it in ethtool. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e98365af |
|
24-Apr-2022 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: clear inited state and stop client after failed to register netdev If failed to register netdev, it needs to clear INITED state and stop client in case of cause problem when concurrency with uninitialized process of driver. Fixes: a289a7e5c1d4 ("net: hns3: put off calling register_netdev() until client initialize complete") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
671cb8cb |
|
26-Mar-2022 |
Peng Li <lipeng321@huawei.com> |
net: hns3: clean residual vf config after disable sriov After disable sriov, VF still has some config and info need to be cleaned, which configured by PF. This patch clean the HW config and SW struct vport->vf_info. Fixes: fa8d82e853e8 ("net: hns3: Add support of .sriov_configure in HNS3 driver") Signed-off-by: Peng Li<lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a89cbb16 |
|
26-Mar-2022 |
Hao Chen <chenhao288@hisilicon.com> |
net: hns3: add max order judgement for tx spare buffer Add max order judgement for tx spare buffer to avoid triggering call trace, print related fail information instead, when user set tx spare buf size to a large value which causes order exceeding 10. Fixes: e445f08af2b1 ("net: hns3: add support to set/get tx copybreak buf size via ethtool for hns3 driver") Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
87783721 |
|
26-Mar-2022 |
Hao Chen <chenhao288@hisilicon.com> |
net: hns3: fix ethtool tx copybreak buf size indicating not aligned issue When use ethtoool set tx copybreak buf size to a large value which causes order exceeding 10 or memory is not enough, it causes allocating tx copybreak buffer failed and print "the active tx spare buf is 0, not enabled tx spare buffer", however, use --get-tunable parameter query tx copybreak buf size and it indicates setting value not 0. So, it's necessary to change the print value from setting value to 0. Set kinfo.tx_spare_buf_size to 0 when set tx copybreak buf size failed. Fixes: e445f08af2b1 ("net: hns3: add support to set/get tx copybreak buf size via ethtool for hns3 driver") Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
87a9b2fd |
|
06-Feb-2022 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: add support for TX push mode For the device that supports the TX push capability, the BD can be directly copied to the device memory. However, due to hardware restrictions, the push mode can be used only when there are no more than two BDs, otherwise, the doorbell mode based on device memory is used. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1b33341e |
|
02-Dec-2021 |
Jie Wang <wangjie125@huawei.com> |
net: hns3: refactor function hns3_get_vector_ring_chain() Currently hns3_get_vector_ring_chain() is a bit long. Refactor it by extracting sub process to improve the readability. Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8d4b409b |
|
02-Dec-2021 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: split function hns3_nic_net_xmit() Function hns3_nic_net_xmit() is a bit too long. So add a new function hns3_handle_skb_desc() to simplify code and improve code readability. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a1cfb24d |
|
02-Dec-2021 |
Peng Li <lipeng321@huawei.com> |
net: hns3: refactor function hns3_fill_skb_desc to simplify code The function hns3_fill_skb_desc is hard to read, this patch extract 2 functions and add new a struct data to simplify the code and Improve readability. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e6d72f6a |
|
02-Dec-2021 |
Peng Li <lipeng321@huawei.com> |
net: hns3: extract macro to simplify ring stats update code As the code to update ring stats is alike for different ring stats type, this patch extract macro to simplify ring stats update code. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1d851c09 |
|
29-Nov-2021 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: split function hns3_set_l2l3l4() Function hns3_set_l2l3l4() is a bit too long. So add two new functions hns3_set_l3_type() and hns3_set_l4_csum_length() to simplify code and improve code readability. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2fbf6a07 |
|
29-Nov-2021 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: split function hns3_handle_bdinfo() Function hns3_handle_bdinfo() is a bit too long. So add two new functions hns3_handle_rx_ts_info() and hns3_handle_rx_vlan_tag( to simplify code and improve code readability. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8469b645 |
|
29-Nov-2021 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: split function hns3_nic_get_stats64() Function hns3_nic_get_stats64() is a bit too long. So add a new function hns3_fetch_stats() to simplify code and improve code readability. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a4ae2bc0 |
|
29-Nov-2021 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: split function hns3_get_tx_timeo_queue_info() Function hns3_get_tx_timeo_queue_info() is a bit too long. So add two new functions hns3_dump_queue_stats() and hns3_dump_queue_reg() to simplify code and improve code readability. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e74a726d |
|
29-Nov-2021 |
Hao Chen <chenhao288@hisilicon.com> |
net: hns3: refactor hns3_nic_reuse_page() Split rx copybreak handle into a separate function from function hns3_nic_reuse_page() to improve code simplicity. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e54b708c |
|
27-Nov-2021 |
Hao Chen <chenhao288@hisilicon.com> |
net: hns3: use macro IANA_VXLAN_GPE_UDP_PORT to replace number 4790 This patch uses macro IANA_VXLAN_GPE_UDP_PORT to replace number 4790 for cleanup. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
db596298 |
|
23-Nov-2021 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: add dql info when tx timeout When tx timeout occurs, the info of dql maybe helpful, so print these info to hns3_get_tx_timeo_queue_info(). Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4f331fda |
|
23-Nov-2021 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: format the output of the MAC address Printing the whole MAC addresse may bring security risks. Therefore, the MAC address is partially encrypted to improve security. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e175eb5f |
|
18-Nov-2021 |
Hao Chen <chenhao288@hisilicon.com> |
net: hns3: remove the way to set tx spare buf via module parameter The way to set tx spare buf via module parameter is not such convenient as the way to set it via ethtool. So,remove the way to set tx spare buf via module parameter. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e445f08a |
|
18-Nov-2021 |
Hao Chen <chenhao288@hisilicon.com> |
net: hns3: add support to set/get tx copybreak buf size via ethtool for hns3 driver Tx copybreak buf size is used for tx copybreak feature, the feature is used for small size packet or frag. It adds a queue based tx shared bounce buffer to memcpy the small packet when the len of xmitted skb is below tx_copybreak(value to distinguish small size and normal size), and reduce the overhead of dma map and unmap when IOMMU is on. Support setting it via ethtool --set-tunable parameter and getting it via ethtool --get-tunable parameter. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5337824f |
|
16-Nov-2021 |
Eric Dumazet <edumazet@google.com> |
net: annotate accesses to queue->trans_start In following patches, dev_watchdog() will no longer stop all queues. It will read queue->trans_start locklessly. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4721031c |
|
15-Nov-2021 |
Eric Dumazet <edumazet@google.com> |
net: move gro definitions to include/net/gro.h include/linux/netdevice.h became too big, move gro stuff into include/net/gro.h Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3b6db4a0 |
|
10-Nov-2021 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: sync rx ring head in echo common pull When the driver processes rx packets, the head pointer is updated only after the number of received packets reaches 16. However, hardware relies on the head pointer to calculate the number of FBDs. As a result, the hardware calculates the FBD incorrectly. Therefore, the driver proactively updates the head pointer in each common poll to ensure that the number of FBDs calculated by the hardware is correct. Fixes: 68752b24f51a ("net: hns3: schedule the polling again when allocation fails") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f3956ebb |
|
01-Oct-2021 |
Jakub Kicinski <kuba@kernel.org> |
ethernet: use eth_hw_addr_set() instead of ether_addr_copy() Convert Ethernet from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
68752b24 |
|
19-Oct-2021 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: schedule the polling again when allocation fails Currently when there is a rx page allocation failure, it is possible that polling may be stopped if there is no more packet to be reveiced, which may cause queue stall problem under memory pressure. This patch makes sure polling is scheduled again when there is any rx page allocation failure, and polling will try to allocate receive buffers until it succeeds. Now the allocation retry is added, it is unnecessary to do the rx page allocation at the end of rx cleaning, so remove it. And reset the unused_count to zero after calling hns3_nic_alloc_rx_buffers() to avoid calling hns3_nic_alloc_rx_buffers() repeatedly under memory pressure. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9f9f0f19 |
|
19-Oct-2021 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix for miscalculation of rx unused desc rx unused desc is the desc that need attatching new buffer before refilling to hw to receive new packet, the number of desc need attatching new buffer is calculated using next_to_use and next_to_clean. when next_to_use == next_to_clean, currently hns3 driver assumes that all the desc has the buffer attatched, but 'next_to_use == next_to_clean' also means all the desc need attatching new buffer if hw has comsumed all the desc and the driver has not attatched any buffer to the desc yet. This patch adds 'refill' in desc_cb to indicate whether a new buffer has been refilled to a desc. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
adfb7b49 |
|
19-Oct-2021 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix the max tx size according to user manual Currently the max tx size supported by the hw is calculated by using the max BD num supported by the hw. According to the hw user manual, the max tx size is fixed value for both non-TSO and TSO skb. This patch updates the max tx size according to the manual. Fixes: 8ae10cfb5089("net: hns3: support tx-scatter-gather-fraglist feature") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a8e76fef |
|
29-Sep-2021 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: remove tc enable checking Currently, in function hns3_nic_set_real_num_queue(), the driver doesn't report the queue count and offset for disabled tc. If user enables multiple TCs, but only maps user priorities to partial of them, it may cause the queue range of the unmapped TC being displayed abnormally. Fix it by removing the tc enable checking, ensure the queue count is not zero. With this change, the tc_en is useless now, so remove it. Fixes: a75a8efa00c5 ("net: hns3: Fix tc setup when netdev is first up") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5b09e88e |
|
29-Sep-2021 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: do not allow call hns3_nic_net_open repeatedly hns3_nic_net_open() is not allowed to called repeatly, but there is no checking for this. When doing device reset and setup tc concurrently, there is a small oppotunity to call hns3_nic_net_open repeatedly, and cause kernel bug by calling napi_enable twice. The calltrace information is like below: [ 3078.222780] ------------[ cut here ]------------ [ 3078.230255] kernel BUG at net/core/dev.c:6991! [ 3078.236224] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 3078.243431] Modules linked in: hns3 hclgevf hclge hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [ 3078.258880] CPU: 0 PID: 295 Comm: kworker/u8:5 Tainted: G O 5.14.0-rc4+ #1 [ 3078.269102] Hardware name: , BIOS KpxxxFPGA 1P B600 V181 08/12/2021 [ 3078.276801] Workqueue: hclge hclge_service_task [hclge] [ 3078.288774] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 3078.296168] pc : napi_enable+0x80/0x84 tc qdisc sho[w 3d0e7v8 .e3t0h218 79] lr : hns3_nic_net_open+0x138/0x510 [hns3] [ 3078.314771] sp : ffff8000108abb20 [ 3078.319099] x29: ffff8000108abb20 x28: 0000000000000000 x27: ffff0820a8490300 [ 3078.329121] x26: 0000000000000001 x25: ffff08209cfc6200 x24: 0000000000000000 [ 3078.339044] x23: ffff0820a8490300 x22: ffff08209cd76000 x21: ffff0820abfe3880 [ 3078.349018] x20: 0000000000000000 x19: ffff08209cd76900 x18: 0000000000000000 [ 3078.358620] x17: 0000000000000000 x16: ffffc816e1727a50 x15: 0000ffff8f4ff930 [ 3078.368895] x14: 0000000000000000 x13: 0000000000000000 x12: 0000259e9dbeb6b4 [ 3078.377987] x11: 0096a8f7e764eb40 x10: 634615ad28d3eab5 x9 : ffffc816ad8885b8 [ 3078.387091] x8 : ffff08209cfc6fb8 x7 : ffff0820ac0da058 x6 : ffff0820a8490344 [ 3078.396356] x5 : 0000000000000140 x4 : 0000000000000003 x3 : ffff08209cd76938 [ 3078.405365] x2 : 0000000000000000 x1 : 0000000000000010 x0 : ffff0820abfe38a0 [ 3078.414657] Call trace: [ 3078.418517] napi_enable+0x80/0x84 [ 3078.424626] hns3_reset_notify_up_enet+0x78/0xd0 [hns3] [ 3078.433469] hns3_reset_notify+0x64/0x80 [hns3] [ 3078.441430] hclge_notify_client+0x68/0xb0 [hclge] [ 3078.450511] hclge_reset_rebuild+0x524/0x884 [hclge] [ 3078.458879] hclge_reset_service_task+0x3c4/0x680 [hclge] [ 3078.467470] hclge_service_task+0xb0/0xb54 [hclge] [ 3078.475675] process_one_work+0x1dc/0x48c [ 3078.481888] worker_thread+0x15c/0x464 [ 3078.487104] kthread+0x160/0x170 [ 3078.492479] ret_from_fork+0x10/0x18 [ 3078.498785] Code: c8027c81 35ffffa2 d50323bf d65f03c0 (d4210000) [ 3078.506889] ---[ end trace 8ebe0340a1b0fb44 ]--- Once hns3_nic_net_open() is excute success, the flag HNS3_NIC_STATE_DOWN will be cleared. So add checking for this flag, directly return when HNS3_NIC_STATE_DOWN is no set. Fixes: e888402789b9 ("net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d18e8118 |
|
13-Sep-2021 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: pad the short tunnel frame before sending to hardware The hardware cannot handle short tunnel frames below 65 bytes, and will cause vlan tag missing problem. So pads packet size to 65 bytes for tunnel frames to fix this bug. Fixes: 3db084d28dc0("net: hns3: Fix for vxlan tx checksum bug") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f7ec554b |
|
13-Sep-2021 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: add option to turn off page pool feature When page pool is added to the hns3 driver, it is always enabled unconditionally, which means spilt page handling in the hns3 driver is dead code. As there is a requirement to test the performance between spilt page handling in driver and page pool, so add a module param to support disabling the page pool. When the page pool is proved to perform better in most case, the spilt page handling in driver can be removed. Fixes: 93188e9642c3 ("net: hns3: support skb's frag page recycling based on page pool") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7f2d4b7f |
|
30-Aug-2021 |
Hao Chen <chenhao288@hisilicon.com> |
net: hns3: remove unnecessary spaces This patch removes some unnecessary spaces for cleanup. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c74e5035 |
|
30-Aug-2021 |
Hao Chen <chenhao288@hisilicon.com> |
net: hns3: add some required spaces Add some required spaces to improve readability. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
dc9b5ce0 |
|
30-Aug-2021 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: refine function hns3_set_default_feature() Currently, the driver sets default feature for netdev->features, netdev->hw_features, netdev->vlan_features and netdev->hw_enc_features separately. It's fussy, because most of the feature bits are same. So refine it by copy value from netdev->features. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
38b99e1e |
|
30-Aug-2021 |
Hao Chen <chenhao288@hisilicon.com> |
net: hnss3: use max() to simplify code Replace the "? :" statement wich max() to simplify code. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c511dfff |
|
27-Aug-2021 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: add hns3_state_init() to do state initialization To improve the readability and maintainability, add hns3_state_init() to initialize the state, and this new function will be used to add more state initialization in the future. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cce1689e |
|
20-Aug-2021 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: add ethtool support for CQE/EQE mode configuration Add support in ethtool for switching EQE/CQE mode. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
9f0c6f4b |
|
20-Aug-2021 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: add support for EQE/CQE mode configuration For device whose version is above V3(include V3), the GL can select EQE or CQE mode, so adds support for it. In CQE mode, the coalesced timer will restart when the first new completion occurs, while in EQE mode, the timer will not restart. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
93188e96 |
|
05-Aug-2021 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: support skb's frag page recycling based on page pool This patch adds skb's frag page recycling support based on the frag page support in page pool. The performance improves above 10~20% for single thread iperf TCP flow with IOMMU disabled when iperf server and irq/NAPI have a different CPU. The performance improves about 135%(14Gbit to 33Gbit) for single thread iperf TCP flow when IOMMU is in strict mode and iperf server shares the same cpu with irq/NAPI. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
a7605370 |
|
27-Jul-2021 |
Arnd Bergmann <arnd@arndb.de> |
dev_ioctl: split out ndo_eth_ioctl Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
96104500 |
|
18-Jun-2021 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix reuse conflict of the rx page In the current rx page reuse handling process, the rx page buffer may have conflict between driver and stack in high-pressure scenario. To fix this problem, we need to check whether the page is only owned by driver at the begin and at the end of a page to make sure there is no reuse conflict between driver and stack when desc_cb->page_offset is rollbacked to zero or increased. Fixes: fa7711b888f2 ("net: hns3: optimize the rx page reuse handling process") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
99f6b5fb |
|
16-Jun-2021 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: use bounce buffer when rx page can not be reused Currently rx page will be reused to receive future packet when the stack releases the previous skb quickly. If the old page can not be reused, a new page will be allocated and mapped, which comsumes a lot of cpu when IOMMU is in the strict mode, especially when the application and irq/NAPI happens to run on the same cpu. So allocate a new frag to memcpy the data to avoid the costly IOMMU unmapping/mapping operation, and add "frag_alloc_err" and "frag_alloc" stats in "ethtool -S ethX" cmd. The throughput improves above 50% when running single thread of iperf using TCP when IOMMU is in strict mode and iperf shares the same cpu with irq/NAPI(rx_copybreak = 2048 and mtu = 1500). Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fa7711b8 |
|
16-Jun-2021 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: optimize the rx page reuse handling process Current rx page offset only reset to zero when all the below conditions are satisfied: 1. rx page is only owned by driver. 2. rx page is reusable. 3. the page offset that is above to be given to the stack has reached the end of the page. If the page offset is over the hns3_buf_size(), it means the buffer below the offset of the page is usable when the above condition 1 & 2 are satisfied, so page offset can be reset to zero instead of increasing the offset. We may be able to always reuse the first 4K buffer of a 64K page, which means we can limit the hot buffer size as much as possible. The above optimization is a side effect when refacting the rx page reuse handling in order to support the rx copybreak. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7459775e |
|
16-Jun-2021 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: support dma_map_sg() for multi frags skb Using the queue based tx buffer, it is also possible to allocate a sgl buffer, and use skb_to_sgvec() to convert the skb to the sgvec in order to support the dma_map_sg() to decreases the overhead of IOMMU mapping and unmapping. Firstly, it reduces the number of buffers. For example, a tcp skb may have a 66-byte header and 3 fragments of 4328, 32768, and 28064 bytes. With this patch, dma_map_sg() will combine them into two buffers, 66-bytes header and one 65160-bytes fragment by using IOMMU. Secondly, it reduces the number of dma mapping and unmapping. All the original 4 buffers are mapped only once rather than 4 times. The throughput improves above 10% when running single thread of iperf using TCP when IOMMU is in strict mode. Suggested-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1a00197b |
|
16-Jun-2021 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: add support to query tx spare buffer size for pf Add support to query tx spare buffer size from configuration file, and use this info to do spare buffer initialization when the module parameter 'tx_spare_buf_size' is not specified. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
907676b1 |
|
16-Jun-2021 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: use tx bounce buffer for small packets when the packet or frag size is small, it causes both security and performance issue. As dma can't map sub-page, this means some extra kernel data is visible to devices. On the other hand, the overhead of dma map and unmap is huge when IOMMU is on. So add a queue based tx shared bounce buffer to memcpy the small packet when the len of the xmitted skb is below tx_copybreak. Add tx_spare_buf_size module param to set the size of tx spare buffer, and add set/get_tunable to set or query the tx_copybreak. The throughtput improves from 30 Gbps to 90+ Gbps when running 16 netperf threads with 32KB UDP message size when IOMMU is in the strict mode(tx_copybreak = 2000 and mtu = 1500). Suggested-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8677d78c |
|
16-Jun-2021 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: refactor for hns3_fill_desc() function Factor out hns3_fill_desc() so that it can be reused in the tx bounce supporting. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
26f1ccdf |
|
16-Jun-2021 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: minor refactor related to desc_cb handling desc_cb is used to store mapping and freeing info for the corresponding desc, which is used in the cleaning process. There will be more desc_cb type coming up when supporting the tx bounce buffer, change desc_cb type to bit-wise value in order to reduce the desc_cb type checking operation in the data path. Also move the desc_cb type definition to hns3_enet.h because it is only used in hns3_enet.c, and declare a local variable desc_cb in hns3_clear_desc() to reduce lines of code. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0bf5eb78 |
|
10-Jun-2021 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: add support for PTP Adds PTP support for HNS3 ethernet driver. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2ba30662 |
|
30-May-2021 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: add support for modify VLAN filter state Previously, with hardware limitation, the port VLAN filter are effective for both PF and its VFs simultaneously, so a single function is not able to enable/disable separately, and the VLAN filter state is default enabled. Now some device supports each function to bypass port VLAN filter, then each function can switch VLAN filter separately. Add capability flag to check whether the device supports modify VLAN filter state. If flag on, user will be able to modify the VLAN filter state by ethtool -K. Furtherly, the default VLAN filter state is also changed according to whether non-zero VLAN used. Then the device can receive packet with any VLAN tag if only VLAN 0 used. The function hclge_need_enable_vport_vlan_filter() is used to help implement above changes. And the VLAN filter handle for promisc mode can also be simplified by this function. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
307ea4ce |
|
25-May-2021 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: switch to dim algorithm for adaptive interrupt moderation The Linux kernel has support for a dynamic interrupt moderation algorithm known as "dimlib". Replace the custom driver-specific implementation of dynamic interrupt moderation with the kernel's algorithm. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
77e91848 |
|
13-May-2021 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: refactor dump bd info of debugfs Currently, the debugfs command for bd info is implemented by "echo xxxx > cmd", and record the information in dmesg. It's unnecessary and heavy. To improve it, add two debugfs directories "tx_bd_info" and "rx_bd_info", and create a file for each queue under these two directories, and query the bd info of specific queue by "cat tx_bd_info/tx_bd_queue*" or "cat rx_bd_info/rx_bd_queue*", return the result to userspace, rather than record in dmesg. The display style is below: $ cat rx_bd_info/rx_bd_queue0 Queue 0 rx bd info: BD_IDX L234_INFO PKT_LEN SIZE... 0 0x0 60 60... 1 0x0 1512 1512... $ cat tx_bd_info/tx_bd_queue0 Queue 0 tx bd info: BD_IDX ADDRESS VLAN_TAG SIZE... 0 0x0 0 0... 1 0x0 0 0... Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5e69ea7e |
|
13-May-2021 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: refactor the debugfs process Currently, each debugfs command needs to create a file to get the information. To better support more debugfs commands, the debugfs process is reconstructed, including the process of creating dentries and files, and obtaining information. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1ddc028a |
|
13-May-2021 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: refactor out RX completion checksum Only when RXD advanced layout is enabled, in some cases (e.g. ip fragments), the checksum of entire packet will be calculated and filled in the least significant 16 bits of the unused addr field. So refactor out the handling of RX completion checksum: adjust the location of the checksum in RX descriptor, and use ptype table to identify whether this kind of checksum is calculated. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
79664077 |
|
13-May-2021 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: support RXD advanced layout Currently, the driver gets packet type by parsing the L3_ID/L4_ID/OL3_ID/OL4_ID from RX descriptor, it's time-consuming. Now some new devices support RXD advanced layout, which combines previous OL3_ID/OL4_ID to 8bit ptype field, so the driver gets packet type by looking up only one table, and L3_ID/L4_ID become reserved fields. Considering compatibility, the firmware will report capability of RXD advanced layout, the driver will identify and enable it by default. This patch provides basic function: identify and enable the RXD advanced layout, and refactor out hns3_rx_checksum() by using ptype table to handle RX checksum if supported. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9bb5a495 |
|
18-May-2021 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: check the return of skb_checksum_help() Currently skb_checksum_help()'s return is ignored, but it may return error when it fails to allocate memory when linearizing. So adds checking for the return of skb_checksum_help(). Fixes: 76ad4f0ee747("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Fixes: 3db084d28dc0("net: hns3: Fix for vxlan tx checksum bug") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
73a13d8d |
|
18-May-2021 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: fix user's coalesce configuration lost issue Currently, when adaptive is on, the user's coalesce configuration may be overwritten by the dynamic one. The reason is that user's configurations are saved in struct hns3_enet_tqp_vector whose value maybe changed by the dynamic algorithm. To fix it, use struct hns3_nic_priv instead of struct hns3_enet_tqp_vector to save and get the user's configuration. BTW, operations of storing and restoring coalesce info in the reset process are unnecessary now, so remove them as well. Fixes: 434776a5fae2 ("net: hns3: add ethtool_ops.set_coalesce support to PF") Fixes: 7e96adc46633 ("net: hns3: add ethtool_ops.get_coalesce support to PF") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a289a7e5 |
|
18-May-2021 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: put off calling register_netdev() until client initialize complete Currently, the netdevice is registered before client initializing complete. So there is a timewindow between netdevice available and usable. In this case, if user try to change the channel number or ring param, it may cause the hns3_set_rx_cpu_rmap() being called twice, and report bug. [47199.416502] hns3 0000:35:00.0 eth1: set channels: tqp_num=1, rxfh=0 [47199.430340] hns3 0000:35:00.0 eth1: already uninitialized [47199.438554] hns3 0000:35:00.0: rss changes from 4 to 1 [47199.511854] hns3 0000:35:00.0: Channels changed, rss_size from 4 to 1, tqps from 4 to 1 [47200.163524] ------------[ cut here ]------------ [47200.171674] kernel BUG at lib/cpu_rmap.c:142! [47200.177847] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [47200.185259] Modules linked in: hclge(+) hns3(-) hns3_cae(O) hns_roce_hw_v2 hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [last unloaded: hclge] [47200.205912] CPU: 1 PID: 8260 Comm: ethtool Tainted: G O 5.11.0-rc3+ #1 [47200.215601] Hardware name: , xxxxxx 02/04/2021 [47200.223052] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [47200.230188] pc : cpu_rmap_add+0x38/0x40 [47200.237472] lr : irq_cpu_rmap_add+0x84/0x140 [47200.243291] sp : ffff800010e93a30 [47200.247295] x29: ffff800010e93a30 x28: ffff082100584880 [47200.254155] x27: 0000000000000000 x26: 0000000000000000 [47200.260712] x25: 0000000000000000 x24: 0000000000000004 [47200.267241] x23: ffff08209ba03000 x22: ffff08209ba038c0 [47200.273789] x21: 000000000000003f x20: ffff0820e2bc1680 [47200.280400] x19: ffff0820c970ec80 x18: 00000000000000c0 [47200.286944] x17: 0000000000000000 x16: ffffb43debe4a0d0 [47200.293456] x15: fffffc2082990600 x14: dead000000000122 [47200.300059] x13: ffffffffffffffff x12: 000000000000003e [47200.306606] x11: ffff0820815b8080 x10: ffff53e411988000 [47200.313171] x9 : 0000000000000000 x8 : ffff0820e2bc1700 [47200.319682] x7 : 0000000000000000 x6 : 000000000000003f [47200.326170] x5 : 0000000000000040 x4 : ffff800010e93a20 [47200.332656] x3 : 0000000000000004 x2 : ffff0820c970ec80 [47200.339168] x1 : ffff0820e2bc1680 x0 : 0000000000000004 [47200.346058] Call trace: [47200.349324] cpu_rmap_add+0x38/0x40 [47200.354300] hns3_set_rx_cpu_rmap+0x6c/0xe0 [hns3] [47200.362294] hns3_reset_notify_init_enet+0x1cc/0x340 [hns3] [47200.370049] hns3_change_channels+0x40/0xb0 [hns3] [47200.376770] hns3_set_channels+0x12c/0x2a0 [hns3] [47200.383353] ethtool_set_channels+0x140/0x250 [47200.389772] dev_ethtool+0x714/0x23d0 [47200.394440] dev_ioctl+0x4cc/0x640 [47200.399277] sock_do_ioctl+0x100/0x2a0 [47200.404574] sock_ioctl+0x28c/0x470 [47200.409079] __arm64_sys_ioctl+0xb4/0x100 [47200.415217] el0_svc_common.constprop.0+0x84/0x210 [47200.422088] do_el0_svc+0x28/0x34 [47200.426387] el0_svc+0x28/0x70 [47200.431308] el0_sync_handler+0x1a4/0x1b0 [47200.436477] el0_sync+0x174/0x180 [47200.441562] Code: 11000405 79000c45 f8247861 d65f03c0 (d4210000) [47200.448869] ---[ end trace a01efe4ce42e5f34 ]--- The process is like below: excuting hns3_client_init | register_netdev() | hns3_set_channels() | | hns3_set_rx_cpu_rmap() hns3_reset_notify_uninit_enet() | | | quit without calling function | hns3_free_rx_cpu_rmap for flag | HNS3_NIC_STATE_INITED is unset. | | | hns3_reset_notify_init_enet() | | set HNS3_NIC_STATE_INITED call hns3_set_rx_cpu_rmap()-- crash Fix it by calling register_netdev() at the end of function hns3_client_init(). Fixes: 08a100689d4b ("net: hns3: re-organize vector handle") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b416e872 |
|
30-Apr-2021 |
Peng Li <lipeng321@huawei.com> |
net: hns3: use netif_tx_disable to stop the transmit queue Currently, netif_tx_stop_all_queues() is used to ensure that the xmit is not running, but for the concurrent case it will not take effect, since netif_tx_stop_all_queues() just sets a flag without locking to indicate that the xmit queue(s) should not be run. So use netif_tx_disable() to replace netif_tx_stop_all_queues(), it takes the xmit queue lock while marking the queue stopped. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
905416f1 |
|
30-Apr-2021 |
Hao Chen <chenhao288@hisilicon.com> |
net: hns3: fix for vxlan gpe tx checksum bug When skb->ip_summed is CHECKSUM_PARTIAL, for non-tunnel udp packet, which has a dest port as the IANA assigned, the hardware is expected to do the checksum offload, but the hardware whose version is below V3 will not do the checksum offload when udp dest port is 4790. So fixes it by doing the checksum in software for this case. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b4047aac |
|
29-Apr-2021 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: add check for HNS3_NIC_STATE_INITED in hns3_reset_notify_up_enet() In some cases, the device is not initialized because reset failed. If another task calls hns3_reset_notify_up_enet() before reset retry, it will cause an error since uninitialized pointer access. So add check for HNS3_NIC_STATE_INITED before calling hns3_nic_net_open() in hns3_reset_notify_up_enet(). Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d0494135 |
|
09-Apr-2021 |
Colin Ian King <colin.king@canonical.com> |
net: hns3: Fix potential null pointer defererence of null ae_dev The reset_prepare and reset_done calls have a null pointer check on ae_dev however ae_dev is being dereferenced via the call to ns3_is_phys_func with the ae->pdev argument. Fix this by performing a null pointer check on ae_dev and hence short-circuiting the dereference to ae_dev on the call to ns3_is_phys_func. Addresses-Coverity: ("Dereference before null check") Fixes: 715c58e94f0d ("net: hns3: add suspend and resume pm_ops") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
715c58e9 |
|
07-Apr-2021 |
Jiaran Zhang <zhangjiaran@huawei.com> |
net: hns3: add suspend and resume pm_ops To implement the system suspend/resume functions, the NIC driver needs to support: 1. When the system enters the suspend mode, the driver needs to implement the suspend callback function of the NIC device. The driver needs to mute the device, stop all RX/TX activities of the device, and unmap the interrupt. 2. When the system enters the resume mode, the driver needs to implement the resume callback function of the NIC device and restore the device to the state before suspension. When the system enters the suspend and resume mode, the NIC driver actually executes the PF function reset process. When the PFs are suspending/resuming, VFs also enter the suspend/resume state because the PFs trigger the VFs to reset, therefore no operation is required when the VF pci_driver is suspending or resuming. Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
bb1890d5 |
|
07-Apr-2021 |
Jiaran Zhang <zhangjiaran@huawei.com> |
net: hns3: change flr_prepare/flr_done function names The flr_prepare/flr_done functions are not only used in the FLR scenario, but also used in the suspend/resume. Change the function names to prepare_for_reset/rebuild_for_reset, change the flr_prepare/flr_done to reset_prepare/reset_done in hnae3_ae_ops. Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d392ecd1 |
|
05-Apr-2021 |
Salil Mehta <salil.mehta@huawei.com> |
net: hns3: Limiting the scope of vector_ring_chain variable Limiting the scope of the variable vector_ring_chain to the block where it is used. Fixes: 424eb834a9be ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC") Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
97b9e5c1 |
|
28-Mar-2021 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: add stats logging when skb padding fails skb_put_padto() may fails because of memory failure, sw_err_cnt is already used to log memory failure in hns3_skb_linearize(), so use it to log the memory failure for skb_put_padto() too. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
811c0830 |
|
28-Mar-2021 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: add tx send size handling for tso skb The actual size on wire for tso skb should be (gso_segs - 1) * hdr + skb->len instead of skb->len, which can be seen by user using 'ethtool -S ethX' cmd, and 'Byte Queue Limit' also use the send size stat to do the queue limiting, so add send_bytes in the desc_cb to record the actual send size for a skb. And send_bytes is only for tx desc_cb and page_offset is only for rx desc, so reuse the same space for both of them. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d5d5e019 |
|
28-Mar-2021 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: add handling for xmit skb with recursive fraglist Currently hns3 driver only handle the xmit skb with one level of fraglist skb, add handling for multi level by calling hns3_tx_bd_num() recursively when calculating bd num and calling hns3_fill_skb_to_desc() recursively when filling tx desc. When the skb has a fraglist level of 24, the skb is simply dropped and stats.max_recursion_level is added to record the error. Move the stat handling from hns3_nic_net_xmit() to hns3_nic_maybe_stop_tx() in order to handle different error stat and add the 'max_recursion_level' and 'hw_limitation' stat. Note that the max recursive level as 24 is chose according to below: commit 48a1df65334b ("skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow"). And that we are not able to find a testcase to verify the recursive fraglist case, so Fixes tag is not provided. Reported-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8fa86551 |
|
28-Mar-2021 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: optimize the process of queue reset Currently, the queue reset process needs to be performed one by one, which is inefficient. However, the queue reset of the same function is always performed at the same time. Therefore, according to the UM, command HCLGE_OPC_CFG_RST_TRIGGER can be used to reset all queues of the same function at a time, in order to optimize the queue reset process. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c0127115 |
|
25-Mar-2021 |
Peng Li <lipeng321@huawei.com> |
net: hns3: remove redundant blank lines Remove some redundant blank lines. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f07203b0 |
|
21-Mar-2021 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: refine for hns3_del_all_fd_entries() For only PF driver can configure flow director rule, it's better to call hclge_del_all_fd_entries() directly in hclge layer, rather than call hns3_del_all_fd_entries() in hns3 layer. Then the ae_algo->ops.del_all_fd_entries can be removed. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
205238f4 |
|
10-Feb-2021 |
Gustavo A. R. Silva <gustavoars@kernel.org> |
net: hns3: fix return of random stack value Currently, a random stack value is being returned because variable _ret_ is not properly initialized. This variable is actually not used anymore and it should be removed. Fix this by removing all instances of variable ret and return 0. Fixes: 64749c9c38a9 ("net: hns3: remove redundant return value of hns3_uninit_all_ring()") Addresses-Coverity-ID: 1501700 ("Uninitialized scalar variable") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
64749c9c |
|
08-Feb-2021 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: remove redundant return value of hns3_uninit_all_ring() Since hns3_uninit_all_ring() only returns 0, so remove this redundant return value and function declaration in hns3_enet.h. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c5aaf176 |
|
08-Feb-2021 |
Jiaran Zhang <zhangjiaran@huawei.com> |
net: hns3: modify some unmacthed types print parameter Fix an issue where the formatting symbol of the formatting input and output function does not match the actual type. Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9393eb50 |
|
08-Feb-2021 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: clean up unnecessary parentheses in macro definitions In macro definitions, parentheses are unnecessary in some cases, such as the calling parameter of a function, the left variable of the equal sign, and so on. So remove these unnecessary parentheses according to these rules. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ae9e492a |
|
08-Feb-2021 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: remove redundant client_setup_tc handle Since the real tx queue number and real rx queue number always be updated when netdev opens, it's redundant to call hclge_client_setup_tc to do the same thing. So remove it. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e070c8b9 |
|
05-Feb-2021 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: add support for obtaining the maximum frame size Since the newer hardware may supports different frame size, so add support to obtain the capability from the firmware instead of the fixed value. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
a79afa78 |
|
02-Feb-2021 |
Alexander Lobakin <alobakin@pm.me> |
net: use the new dev_page_is_reusable() instead of private versions Now we can remove a bunch of identical functions from the drivers and make them use common dev_page_is_reusable(). All {,un}likely() checks are omitted since it's already present in this helper. Also update some comments near the call sites. Suggested-by: David Rientjes <rientjes@google.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
b9046e88 |
|
22-Jan-2021 |
Xin Long <lucien.xin@gmail.com> |
net: hns3: replace skb->csum_not_inet with skb_csum_is_sctp Commit fa8211701043 ("net: add inline function skb_csum_is_sctp") missed replacing skb->csum_not_inet check in hns3. This patch is to replace it with skb_csum_is_sctp(). Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/3ad3c22c08beb0947f5978e790bd98d2aa063df9.1611307861.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
0205ec04 |
|
09-Dec-2020 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: add support for hw tc offload of tc flower Some new device supports forwarding packet to queues of specified TC when flow director rule hit. So add support to configure flow director rule by tc flower. To avoid rule conflict, add a new flow director mode HCLGE_FD_TC_FLOWER_ACTIVE, and only one mode can be active at the same time. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5a5c9091 |
|
09-Dec-2020 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: add support for tc mqprio offload Currently, the HNS3 driver only supports offload for tc number and prio_tc. This patch adds support for other qopts, including queues count and offset for each tc. When enable tc mqprio offload, it's not allowed to change queue numbers by ethtool. For hardware limitation, the queue number of each tc should be power of 2. For the queues is not assigned to each tc by average, so it's should return vport->alloc_tqps for hclge_get_max_channels(). Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
35244430 |
|
09-Dec-2020 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: refine the struct hane3_tc_info Currently, there are multiple members related to tc information in struct hnae3_knic_private_info. Merge them into a new struct hnae3_tc_info. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
592b0179 |
|
05-Dec-2020 |
Guojia Liao <liaoguojia@huawei.com> |
net: hns3: refine the VLAN tag handle for port based VLAN For DEVICE_VERSION_V2, the hardware only supports max two layer VLAN tags, including port based tag inserted by hardware, tag in tx buffer descriptor(get from skb->tci) and tag in packet. For transmit packet: If port based VLAN disabled, and vf driver gets a VLAN tag from skb, the VLAN tag must be filled to the Outer_VLAN_TAG field (tag near to DMAC) of tx buffer descriptor, otherwise it may be inserted after the tag in packet. If port based VLAN enabled, and vf driver gets a VLAN tag from skb, the VLAN tag must be filled to the VLAN_TAG field (tag far to DMAC) of tx buffer descriptor, otherwise it may be conflicted with port based VLAN, and raise a hardware error. For receive packet: The hardware will strip the VLAN tags and fill them in the rx buffer descriptor, no matter port based VLAN enable or not. Because port based VLAN tag is useless for stack, so vf driver needs to discard the port based VLAN tag get from rx buffer descriptor when port based VLAN enabled. So vf must know about the port based VLAN state. For DEVICE_VERSION_V3, the hardware provides some new configuration to improve it. For transmit packet: When enable tag shift mode, hardware will handle the VLAN tag in outer_VLAN_TAG field as VLAN_TAG, so it won't conflict with port based VLAN. And hardware also make sure the tag before the tag in packet. So vf driver doesn't need to specify the tag position according to the port based VLAN state anymore. For receive packet: When enable discard mode, hardware will strip and discard the port based VLAN tag, so vf driver doesn't need to identify it from rx buffer descriptor. So modify the port based VLAN configuration, simplify the process for vf handling the VLAN tag. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
5e7414cd |
|
05-Dec-2020 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: add priv flags support to switch limit promisc mode Currently, the tx unicast promisc is always enabled when promisc mode on. If tx unicast promisc on, a function will receive all unicast packet from other functions belong to the same port. Add a ethtool private flag to control whether enable tx unicast promisc. Then the function is able to filter the unknown unicast packets from other function. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
ade36cce |
|
27-Nov-2020 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: add a check for devcie's verion in hns3_tunnel_csum_bug() For the device whose version is above V3(include V3), the hardware can do checksum offload for the non-tunnel udp packet, who has a dest port as the IANA assigned. So add a check for devcie's verion in hns3_tunnel_csum_bug(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
3e281621 |
|
27-Nov-2020 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: add udp tunnel checksum segmentation support For the device who has the capability to handle udp tunnel checksum segmentation, add support for it. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
57e72c12 |
|
27-Nov-2020 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: remove unsupported NETIF_F_GSO_UDP_TUNNEL_CSUM Currently, device V1 and V2 do not support segmentation offload for UDP based tunnel packet who needs outer UDP checksum offload, so there is a workaround in the driver to set the checksum of the outer UDP checksum as zero. This is not what the user wants, so remove this feature for device V1 and V2, add support for it later(when the device has the ability to do that). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
66d52f3b |
|
27-Nov-2020 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: add support for TX hardware checksum offload For the device that supports TX hardware checksum, the hardware can calculate the checksum from the start and fill the checksum to the offset position, which reduces the operations of calculating the type and header length of L3/L4. So add this feature for the HNS3 ethernet driver. The previous simple BD description is unsuitable, rename it as HW TX CSUM. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
4b2fe769 |
|
27-Nov-2020 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: add support for RX completion checksum In some cases (for example ip fragment), hardware will calculate the checksum of whole packet in RX, and setup the HNS3_RXD_L2_CSUM_B flag in the descriptor, so add support to utilize this checksum. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
3a6863e4 |
|
20-Nov-2020 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: add support for pf querying new interrupt resources For HNAE3_DEVICE_VERSION_V3, a maximum of 1281 interrupt resources are supported. To utilize these new resources, extend the corresponding field or variable to 16bit type, and remove the restriction of NIC client that only use a maximum of 65 interrupt vectors. In addition, the I/O address of the extended interrupt resources are different, so an extra handler is needed. Currently, the total number of interrupts is the sum of RoCE's number and RoCE's offset (RoCE is in front of NIC), since the number of both NIC and RoCE are same. For readability, rewrite the corresponding field of the command, rename the RoCE's offset field as the number of NIC interrupts, then the total number of interrupts is sum of the number of RoCE and NIC, and replace vport->back with hdev in hclge_init_roce_base_info() for simplifying the code. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
de25bcc4 |
|
16-Nov-2020 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: rename gl_adapt_enable in struct hns3_enet_coalesce Besides GL(Gap Limiting), QL(Quantity Limiting) can be modified dynamically when DIM is supported. So rename gl_adapt_enable as adapt_enable in struct hns3_enet_coalesce. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
5ac84b02 |
|
16-Nov-2020 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: add support for 1us unit GL configuration For device whose version is above V3(include V3), the GL configuration can set as 1us unit, so adds support for configuring this field. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
91bfae25 |
|
16-Nov-2020 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: add support for configuring interrupt quantity limiting QL(quantity limiting) means that hardware supports the interrupt coalesce based on the frame quantity. QL can be configured when int_ql_max in device's specification is non-zero, so add support to configure it. Also, rename two coalesce init function to fit their purpose. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
0692cfe9 |
|
29-Sep-2020 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: add UDP segmentation offload support Add support for UDP segmentation offload to the HNS3 driver when the device can do it. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6ad595bc |
|
29-Sep-2020 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: rename trace event hns3_over_8bd Since the maximun BD number may not be 8 now, so rename hns3_over_8bd() to hns3_over_max_bd(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fd665b3d |
|
29-Sep-2020 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: replace macro HNS3_MAX_NON_TSO_BD_NUM Currently, the driver is able to query the device's specifications, which includes the maximum BD number of non TSO packet, so replace macro HNS3_MAX_NON_TSO_BD_NUM with the queried value, and rewrite macro HNS3_MAX_NON_TSO_SIZE whose value depends on the the maximum BD number of non TSO packet. Also, add a new parameter max_non_tso_bd_num to function hns3_tx_bd_num() and hns3_skb_need_linearized(), then they can get the maximum BD number of non TSO packet from the caller instead of calculating by themself, The note of hns3_skb_need_linearized() should be update as well. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ca850f2b |
|
27-Sep-2020 |
Guangbin Huang <huangguangbin2@huawei.com> |
net: hns3: add support to query device capability In order to improve code maintainability and compatibility, add support to query the device capability by expanding the existing version query command. The device capability refers to the features supported by the device. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
295ba232 |
|
27-Sep-2020 |
Guangbin Huang <huangguangbin2@huawei.com> |
net: hns3: add device version to replace pci revision To better identify the device version, struct hnae3_handle adds a member dev_version to replace pci revision. The dev_version consists of hardware version and PCI revision. The hardware version is queried from firmware by an existing firmware version query command. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c155e22b |
|
24-Sep-2020 |
Guangbin Huang <huangguangbin2@huawei.com> |
net: hns3: rename macro of pci device id of vf VF devices do not have speed division, its speed is depended on its PF. So macro name of PCI device id of VF is incorrent to have 100G info, it should be renamed by removing 100G info. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ae6f010c |
|
24-Sep-2020 |
Guangbin Huang <huangguangbin2@huawei.com> |
net: hns3: add support for 200G device The 200G device has a new device id 0xA228, so adds this device id to pci table, then the driver can probe it. As speed_ability queried from firmware has only 8 bits and already be used up, so firmware adds extra speed_ability_ext to indicate more speed abilities to support 200G and driver needs to parse it. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6cd131dd |
|
24-Sep-2020 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: add a hardware error detect type In hns3_process_hw_error(), the hardware error detection of the ROCEE AXI RESP error type is added. When this error occurs, the client needs to be notified of this error and take corresponding operation. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9d8d5a36 |
|
24-Sep-2020 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: remove unnecessary variable initialization If a variable is assigned a value before it is used, it's no need to assign an initial value to the variable. So remove these redundant operations. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
619ae331 |
|
16-Sep-2020 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: use napi_consume_skb() when cleaning tx desc Use napi_consume_skb() to batch consuming skb when cleaning tx desc in NAPI polling. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
48ee56fd |
|
16-Sep-2020 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: use writel() to optimize the barrier operation writel() can be used to order I/O vs memory by default when writing portable drivers. Use writel() to replace wmb() + writel_relaxed(), and writel() is dma_wmb() + writel_relaxed() for ARM64, so there is an optimization here because dma_wmb() is a lighter barrier than wmb(). Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8c30e194 |
|
16-Sep-2020 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: optimize the rx clean process Currently HNS3_RING_RX_RING_FBDNUM_REG register is read to determine how many rx desc can be cleaned. To avoid the register read operation in the critical data path, use the valid bit in the rx desc to determine if a specific rx desc can be cleaned. The hns3 driver clear valid bit in the rx desc before notifying the rx desc to the hw, and hw will only set the valid bit of the rx desc after corresponding buffer is filled with packet data and other field in the rx desc is set accordingly. Add hns3_rx_ring_move_fw() function to clear the valid bit in the rx desc before moving rx ring's next_to_clean forward to avoid double cleaning a rx desc, also add a dma_rmb() barrier in hns3_handle_rx_bd() to make sure valid bit is set before reading other field in the rx desc. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
20d06ca2 |
|
16-Sep-2020 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: optimize the tx clean process Currently HNS3_RING_TX_RING_HEAD_REG register is read to determine how many tx desc can be cleaned. To avoid the register read operation in the critical data path, use the valid bit in the tx desc to determine if a specific tx desc can be cleaned. The hns3 driver sets valid bit in the tx desc before ringing a doorbell to the hw, and hw will only clear the valid bit of the tx desc after corresponding packet is sent out to the wire. And because next_to_use for tx ring is a changing variable when the driver is filling the tx desc, so reuse the pull_len for rx ring to record the tx desc that has notified to the hw, so that hns3_nic_reclaim_desc() can decide how many tx desc's valid bit need checking when reclaiming tx desc. And io_err_cnt stat is also removed for it is not used anymore. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f6061a05 |
|
16-Sep-2020 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: batch tx doorbell operation Use netdev_xmit_more() to defer the tx doorbell operation when the skb is passed to the driver continuously. By doing this we can improve the overall xmit performance by avoid some doorbell operations. Also, the tx_err_cnt stat is not used, so rename it to tx_more stat. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
aeda9bf8 |
|
16-Sep-2020 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: batch the page reference count updates Batch the page reference count updates instead of doing them one at a time. By doing this we can improve the overall receive performance by avoid some atomic increment operations when the rx page is reused. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2c7bcc1d |
|
07-Sep-2020 |
Guojia Liao <liaoguojia@huawei.com> |
net: hns3: remove some unused function hns3_update_promisc_mode() hns3_update_promisc_mode is defined, but not be used, so remove it. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b7ae986f |
|
07-Sep-2020 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: remove unused field 'io_base' in struct hns3_enet_ring 'io_base' has been defined and initialized, but never used, so remove it. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f468f21b |
|
26-Aug-2020 |
Tariq Toukan <tariqt@mellanox.com> |
net: Take common prefetch code structure into a function Many device drivers use the same prefetch code structure to deal with small L1 cacheline size. Take this code into a function and call it from the drivers. Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a156998f |
|
25-Aug-2020 |
Yi Li <yili@winhong.com> |
net: hns3: Fix for geneve tx checksum bug when skb->encapsulation is 0, skb->ip_summed is CHECKSUM_PARTIAL and it is udp packet, which has a dest port as the IANA assigned. the hardware is expected to do the checksum offload, but the hardware will not do the checksum offload when udp dest port is 6081. This patch fixes it by doing the checksum in software. Reported-by: Li Bing <libing@winhong.com> Signed-off-by: Yi Li <yili@winhong.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
df561f66 |
|
23-Aug-2020 |
Gustavo A. R. Silva <gustavoars@kernel.org> |
treewide: Use fallthrough pseudo-keyword Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
#
a7e90ee5 |
|
27-Jul-2020 |
Yonglong Liu <liuyonglong@huawei.com> |
net: hns3: fix a TX timeout issue When the queue depth and queue parameters are modified, there is a low probability that TX timeout occurs. The two operations cause the link to be down or up when the watchdog is still working. All queues are stopped when the link is down. After the carrier is on, all queues are woken up. If the watchdog detects the link between the carrier on and wakeup queues, a false TX timeout occurs. So fix this issue by modifying the sequence of carrier on and queue wakeup, which is symmetrical to the link down action. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cfdaeba5 |
|
27-Jul-2020 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix desc filling bug when skb is expanded or lineared The linear and frag data part may be changed when the skb is expanded or lineared in skb_cow_head() or skb_checksum_help(), which is called by hns3_fill_skb_desc(), so the linear len return by skb_headlen() before the calling of hns3_fill_skb_desc() is unreliable. Move hns3_fill_skb_desc() before the calling of skb_headlen() to fix this bug. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8ceca59f |
|
21-Jul-2020 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix error handling for desc filling The content of the TX desc is automatically cleared by the HW when the HW has sent out the packet to the wire. When desc filling fails in hns3_nic_net_xmit(), it will call hns3_clear_desc() to do the error handling, which miss zeroing of the TX desc and the checking if a unmapping is needed. So add the zeroing and checking in hns3_clear_desc() to avoid the above problem. Also add DESC_TYPE_UNKNOWN to indicate the info in desc_cb is not valid, because hns3_nic_reclaim_desc() may treat the desc_cb->type of zero as packet and add to the sent pkt statistics accordingly. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
48ae74c9 |
|
21-Jul-2020 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix for not calculating TX BD send size correctly With GRO and fraglist support, the SKB can be aggregated to a total size of 65535, and when that SKB is forwarded through a bridge, the size of the SKB may be pushed to exceed the size of 65535 when br_dev_queue_push_xmit() is called. The max send size of BD supported by the HW is 65535, when a SKB with a headlen of over 65535 is sent to the driver, the driver needs to use multi BD to send the linear data, and the send size of the last BD is calculated incorrectly by the driver who is using '&' operation, which causes a TX error. Use '%' operation to fix this problem. Fixes: 3fe13ed95dd3 ("net: hns3: avoid mult + div op in critical data path") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0ec3b6a7 |
|
21-Jul-2020 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix for not unmapping TX buffer correctly When a big TX buffer is sent using multi BD, the driver maps the whole TX buffer, and unmaps it using info in desc_cb corresponding to each BD, but only the info in the desc_cb of first BD is correct, other info in desc_cb is wrong, which causes TX unmapping problem when SMMU is on. Only set the mapping and freeing info in the desc_cb of first BD to fix this problem, because the TX buffer only need to be unmapped and freed once. Fixes: 1e8a7977d09f("net: hns3: add handling for big TX fragment") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huzhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e22b5e72 |
|
06-Jul-2020 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: add a missing uninit debugfs when unload driver When unloading driver, if flag HNS3_NIC_STATE_INITED has been already cleared, the debugfs will not be uninitialized, so fix it. Fixes: b2292360bb2a ("net: hns3: Add debugfs framework registration") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c2a2e127 |
|
17-Jun-2020 |
Barry Song <song.bao.hua@hisilicon.com> |
net: hns3: streaming dma buffer sync between cpu and device Right now they are empty functions for our SoC since hardware can keep cache coherent, but it is still good to align with streaming DMA APIs as device drivers should not make an assumption of SoC. Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e99a308d |
|
17-Jun-2020 |
Barry Song <song.bao.hua@hisilicon.com> |
net: hns3: replace disable_irq by IRQ_NOAUTOEN flag disable_irq() after request_irq() is still risk as there is a chance irq can come after request_irq() and before disable_irq(). this should be done by IRQ_NOAUTOEN flag. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4d2cad32 |
|
17-Jun-2020 |
Barry Song <song.bao.hua@hisilicon.com> |
net: hns3: rename buffer-related functions This is for improving the readability. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cb0e3e61 |
|
17-Jun-2020 |
Barry Song <song.bao.hua@hisilicon.com> |
net: hns3: pointer type of buffer should be void Move the type of buffer address from unsigned char to void Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
674a1357 |
|
17-Jun-2020 |
Barry Song <song.bao.hua@hisilicon.com> |
net: hns3: remove unnecessary devm_kfree since we are using device-managed function, it is unnecessary to free in probe. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
996aade9 |
|
29-May-2020 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: remove some unused codes in hns3_nic_set_features() NETIF_F_HW_VLAN_CTAG_FILTER is not set in netdev->hw_feature for the HNS3 driver, so the handler of NETIF_F_HW_VLAN_CTAG_FILTER in hns3_nic_set_features() won't be called, remove it. Reported-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5c6cfd30 |
|
14-May-2020 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: remove unnecessary frag list checking in hns3_nic_net_xmit() The skb_has_frag_list() in hns3_nic_net_xmit() is redundant, since skb_walk_frags() includes this checking implicitly. Reported-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
039ba863 |
|
23-Apr-2020 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: optimize the filter table entries handling when resetting Currently, the PF driver removes all (including its VFs') MAC/VLAN flow director table entries when resetting, and restores them after reset completed. In fact, the hardware will clear all table entries only in IMP reset and global reset. So driver only needs to restore the table entries in these cases, and needs do nothing when PF reset, FLR or other function level reset. This patch optimizes it by removing unnecessary table entries clear and restoring handling in the reset flow, and doing the restoring after reset completed. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c631c696 |
|
23-Apr-2020 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: refactor the promisc mode setting As the HNS3 driver doesn't update the MAC address directly in function hns3_set_rx_mode() now, it can't know whether the MAC table is full from __dev_uc_sync() and __dev_mc_sync(), so it's senseless to handle the overflow promisc here. This patch removes the handle of overflow promisc from function hns3_set_rx_mode(), and updates the promisc mode in the service task. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ee4bcd3b |
|
23-Apr-2020 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: refactor the MAC address configure Currently, the HNS3 driver sync and unsync MAC address in function hns3_set_rx_mode(). For PF, it adds and deletes MAC address directly in the path of dev_set_rx_mode(). If failed, it won't retry until next calling of hns3_set_rx_mode(). On the other hand, if request add and remove a same address many times at a short interval, each request must be done one by one, can't be merged. For VF, it sends mailbox messages to PF to request adding or deleting MAC address in the path of function hns3_set_rx_mode(), no matter the address is configured success. This patch refines it by recording the MAC address in function hns3_set_rx_mode(), and updating MAC address in the service task. If failed, it will retry by the next calling of periodical service task. It also uses some state to mark the state of each MAC address in the MAC list, which can help merge configure request for a same address. With these changes, when global reset or IMP reset occurs, we can restore the MAC table with the MAC list. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cad99e50 |
|
19-Apr-2020 |
Leon Romanovsky <leon@kernel.org> |
net/hns: Remove custom driver version in favour of global one Use globally defined kernel version instead of custom driver variant. Reported-by: Borislav Petkov <bp@suse.de> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
74ef402e |
|
28-Mar-2020 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: fix for fraglist SKB headlen not handling correctly When the fraglist SKB headlen is larger than zero, current code still handle the fraglist SKB linear data as frag data, which may cause TX error. This patch adds a new DESC_TYPE_FRAGLIST_SKB type to handle the mapping and unmapping of the fraglist SKB linear data buffer. Fixes: 8ae10cfb5089 ("net: hns3: support tx-scatter-gather-fraglist feature") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5eb01ddf |
|
12-Mar-2020 |
Yonglong Liu <liuyonglong@huawei.com> |
net: hns3: fix "tc qdisc del" failed issue The HNS3 driver supports to configure TC numbers and TC to priority map via "tc" tool. But when delete the rule, will fail, because the HNS3 driver needs at least one TC, but the "tc" tool sets TC number to zero when delete. This patch makes sure that the TC number is at least one. Fixes: 30d240dfa2e8 ("net: hns3: Add mqprio hardware offload support in hns3 driver") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8de91e92 |
|
06-Mar-2020 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: synchronize some print relating to reset issue This patch modifies some printing relating to reset issue. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
60df7e91 |
|
21-Jan-2020 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: cleanup some coding style issue This patch removes some unnecessary return value assignments, some duplicated printing in the caller, refines the judgment of 0 and uses le16_to_cpu to replace __le16_to_cpu. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cdc37385 |
|
21-Jan-2020 |
Guojia Liao <liaoguojia@huawei.com> |
net: hns3: refine the input parameter 'size' for snprintf() The function snprintf() writes at most size bytes (including the terminating null byte ('\0') to str. Now, We can guarantee that the parameter of size is lager than the length of str to be formatting including its terminating null byte. So it's unnecessary to minus 1 for the input parameter 'size'. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
08bb3857 |
|
21-Jan-2020 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: do not reuse pfmemalloc pages HNS3 driver allocates pages for DMA with dev_alloc_pages(), which calls alloc_pages_node() with the __GFP_MEMALLOC flag. So, in case of OOM condition, HNS3 can get pages with pfmemalloc flag set. So do not reuse the pages with pfmemalloc flag set because those pages are reserved for special cases, such as low memory case. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
09783d44 |
|
21-Jan-2020 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: limit the error logging in the hns3_clean_tx_ring() The error log printed by netdev_err() in the hns3_clean_tx_ring() may spam the kernel log. This patch uses hns3_rl_err() to ratelimit the error log in the hns3_clean_tx_ring(). Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
36c67349 |
|
14-Jan-2020 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: pad the short frame before sending to the hardware The hardware can not handle short frames below or equal to 32 bytes according to the hardware user manual, and it will trigger a RAS error when the frame's length is below 33 bytes. This patch pads the SKB when skb->len is below 33 bytes before sending it to hardware. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5bffde62 |
|
03-Jan-2020 |
Yonglong Liu <liuyonglong@huawei.com> |
net: hns3: modify the IRQ name of TQP vector When rename the net devices, the IRQ number can not be fetched by the net device name, because the driver request the IRQ resources only when the vector resource changed, and the rename operation did not change the vector resources, so the IRQ name keeps the previous net device name. So this patch modifies the name of the TQP IRQ as "pci driver name"-"pci name"-"TxRx"-"index". Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
08a10068 |
|
03-Jan-2020 |
Yonglong Liu <liuyonglong@huawei.com> |
net: hns3: re-organize vector handle To prevent loss user's IRQ affinity configuration when DOWN, this patch moves out release/request operation of the vector handle from net DOWN/UP, just do it when vector resource changes. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
698a8954 |
|
03-Jan-2020 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: add trace event support for HNS3 driver This adds trace support for HNS3 driver. It also declares some events which could be used to trace the events when a TX/RX BD is processed, and other events which are related to the processing of sk_buff, such as TSO, GRO. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ff7dfcdd |
|
18-Dec-2019 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: add a log for getting chain failure in hns3_nic_uninit_vector_data() Since the mapping can be overwritten, when fail to get the chain between vector and ring, we should go on to deal with the remaining options. For debugging, this patch adds log info for this failure. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2a7556bb |
|
18-Dec-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: implement ndo_features_check ops for hns3 driver The function netif_skb_features() will disable the TSO feature by using dflt_features_check() if the driver does not implement ndo_features_check ops, which may cause performance degradation problem when hns3 hardware can do multiple tagged TSO. Also, the HNS3 hardware only supports checksum on the SKB with a max header len of 480 bytes, so remove the checksum and TSO related features when the header len is over 480 bytes. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b2598318 |
|
18-Dec-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: check FE bit before calling hns3_add_frag() A BD with FE bit means that it is the last BD of a packet, currently the FE bit is checked before calling hns3_add_frag(), which is unnecessary because the FE bit may have been checked in some case. This patch checks the FE bit before calling hns3_add_frag() after processing the first BD of a SKB and adjust the location of memcpy() to reduce duplication. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0290bd29 |
|
10-Dec-2019 |
Michael S. Tsirkin <mst@redhat.com> |
netdev: pass the stuck queue to the timeout handler This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Martin Habets <mhabets@solarflare.com> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d1a37ded |
|
04-Dec-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix a use after free problem in hns3_nic_maybe_stop_tx() Currently, hns3_nic_maybe_stop_tx() uses skb_copy() to linearize a SKB if the BD num required by the SKB does not meet the hardware limitation, and it linearizes the SKB by allocating a new linearized SKB and freeing the old SKB, if hns3_nic_maybe_stop_tx() returns -EBUSY because there are no enough space in the ring to send the linearized skb to hardware, the sch_direct_xmit() still hold reference to old SKB and try to retransmit the old SKB when dev_hard_start_xmit() return TX_BUSY, which may cause use after freed problem. This patch fixes it by using __skb_linearize() to linearize the SKB in hns3_nic_maybe_stop_tx(). Fixes: 51e8439f3496 ("net: hns3: add 8 BD limit for tx flow") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2a597eff |
|
04-Dec-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix for TX queue not restarted problem There is timing window between ring_space checking and netif_stop_subqueue when transmiting a SKB, and the TX BD cleaning may be executed during the time window, which may caused TX queue not restarted problem. This patch fixes it by rechecking the ring_space after netif_stop_subqueue to make sure TX queue is restarted. Also, the ring->next_to_clean is updated even when pkts is zero, because all the TX BD cleaned may be non-SKB, so it needs to check if TX queue need to be restarted. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
39edaf24 |
|
31-Oct-2019 |
Guojia Liao <liaoguojia@huawei.com> |
net: hns3: cleanup byte order issues when printed Though the hip08 and the IMP(Intelligent Management Processor) have the same byte order right now, it is better to convert __be or __le variable into the CPU's byte order before print. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
adcf738b |
|
31-Oct-2019 |
Guojia Liao <liaoguojia@huawei.com> |
net: hns3: cleanup some print format warning Using '%d' for printing type unsigned int or '%u' for type int would cause static tools to give false warnings, so this patch cleanups this warning by using the suitable format specifier of the type of variable. BTW, modifies the type of some variables and macro to synchronize with their usage. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0bfdf286 |
|
31-Oct-2019 |
Guangbin Huang <huangguangbin2@huawei.com> |
net: hns3: optimize local variable initialization The variable tx_ring is unnecessary to be initialized as it will be set before used, and the variable rst_cnt is better to be initialized when declaration for simplification. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
647522a5 |
|
31-Oct-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: add struct netdev_queue debug info for TX timeout When there is a TX timeout, we can tell if the driver or stack has stopped the queue by looking at state field, and when has the last packet transmited by looking at trans_start field. So this patch prints these two field in the hns3_get_tx_timeo_queue_info(). Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7fda3a93 |
|
19-Oct-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: do not allocate linear data for fraglist skb Currently, napi_alloc_skb() is used to allocate skb for fraglist when the head skb is not enough to hold the remaining data, and the remaining data is added to the frags part of the fraglist skb, leaving the linear part unused. So this patch passes length of 0 to allocate fraglist skb with zero size of linear data. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d35bced8 |
|
19-Oct-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: minor cleanup for hns3_handle_rx_bd() Since commit e55970950556 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll"), ring->skb is used to record the current SKB when processing the RX BD in hns3_handle_rx_bd(), so the parameter out_skb is unnecessary. This patch also adjusts the err checking to reduce duplication in hns3_handle_rx_bd(), and "err == -ENXIO" is rare case, so put it in the unlikely annotation. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c8711956 |
|
19-Oct-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: introduce ring_to_netdev() in enet module There are a few places that need to access the netdev of a ring through ring->tqp->handle->kinfo.netdev, and ring->tqp is a struct which both in enet and hclge modules, it is better to use the struct that is only used in enet module. This patch adds the ring_to_netdev() to access the netdev of ring through ring->tqp_vector->napi.dev. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
88b7c58c |
|
19-Oct-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: minor optimization for barrier in IO path Currently, the TX and RX ring in a queue is bounded to the same IRQ, there may be unnecessary barrier op when only one of the ring need to be processed. This patch adjusts the location of rmb() in hns3_clean_tx_ring() and adds a checking in hns3_clean_rx_ring() to avoid unnecessary barrier op when there is nothing to do for the ring. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5f06b903 |
|
19-Oct-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: remove struct hns3_nic_ring_data in hns3_enet module Only the queue_index field in struct hns3_nic_ring_data is used, other field is unused and unnecessary for hns3 driver, so this patch removes it and move the queue_index field to hns3_enet_ring. This patch also removes an unused struct hns_queue declaration. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8ae10cfb |
|
07-Oct-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: support tx-scatter-gather-fraglist feature The hardware supports up to 8 TX BD for non-tso skb and up to 63 TX BD for TSO skb. Currently, the hns3 driver supports RX skb with fraglist when HW GRO is enabled, when the stack forwards a RX skb with fraglist, the stack need to linearize the skb before sending to other interface without TX fraglist support. This patch adds support for TX fraglist. The performance increases from 1 GByte to 1.5 GByte for one iperf TCP stream during forwarding test after this patch. BTW, the minimum BD number of ring should be updated to 72 for supporting TX fraglist. This patch also changes the error handling of some function that called by hns3_fill_desc, which returns BD num when there is no error, change some macro to more meaningful name. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
#
8e6de441 |
|
07-Oct-2019 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: add support for configuring VF MAC from the host This patch adds support of configuring VF MAC from the host for the HNS3 driver. BTW, the parameter init in the hns3_init_mac_addr is unnecessary now, since the MAC address will not read from NCL_CONFIG when doing reset, so it should be removed, otherwise it will affect VF's MAC address initialization. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
#
ee9e4424 |
|
07-Oct-2019 |
Yonglong Liu <liuyonglong@huawei.com> |
net: hns3: add support for configuring bandwidth of VF on the host This patch adds support for configuring bandwidth of VF on the host for HNS3 drivers. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
#
e196ec75 |
|
07-Oct-2019 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: add support for setting VF trust This patch adds supports for setting VF trust by host. If specified VF is trusted, then it can enable promisc(include allmulti mode). If a trusted VF enabled promisc, and being untrusted, host will disable promisc mode for this VF. For VF will update its promisc mode from set_rx_mode now, so it's unnecessary to set broadcst promisc mode when initialization or reset. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
#
22044f95 |
|
07-Oct-2019 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: add support for spoof check setting This patch adds support for spoof check configuration for VFs. When it is enabled, "spoof checking" is done for both mac address and VLAN. For each VF, the HW ensures that the source MAC address (or VLAN) of every outgoing packet exists in the MAC-list (or VLAN-list) configured for RX filtering for that VF. If not, the packet is dropped. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
#
6430f744 |
|
07-Oct-2019 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: add support for setting VF link status on the host This patch adds support to configure VF link properties. The options are auto, enable, and disable. Even if the PF is down, the communication between VFs will be normal if the VFs are set to enable. The commands are as follows: 'ip link set <pf> vf <vf_id> state <auto|enable|disable>' change the VF status 'ip link show' show the setting status Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
#
fa17c708 |
|
10-Sep-2019 |
Guangbin Huang <huangguangbin2@huawei.com> |
net: hns3: check NULL pointer before use This patch checks ops->set_default_reset_request whether is NULL before using it in function hns3_slot_reset. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3a5a5f06 |
|
10-Sep-2019 |
Peng Li <lipeng321@huawei.com> |
net: hns3: revert to old channel when setting new channel num fail After setting new channel num, it needs free old ring memory and allocate new ring memory. If there is no enough memory and allocate new ring memory fail, the ring may initialize fail. To make sure the network interface can work normally, driver should revert the channel to the old configuration. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a83d2961 |
|
28-Aug-2019 |
Weihang Li <liweihang@hisilicon.com> |
net: hns3: implement .process_hw_error for hns3 client When hardware or IMP get specified error it may need the client to take some special operations. This patch implements the hns3 client's process_hw_errorx. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
46ee7350 |
|
16-Aug-2019 |
Guojia Liao <liaoguojia@huawei.com> |
net: hns3: add or modify comments To explain some code, this patch adds some comments, and modifies or merges some comments to make them more neat. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Zhongzhu Liu <liuzhongzhu@huawei.com> Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
615466ce |
|
08-Aug-2019 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: refine MAC pause statistics querying function This patch refines the interface for querying MAC pause statistics, and adds structure hns3_mac_stats to keep the count of TX & RX. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
42611b70 |
|
08-Aug-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: add check for max TX BD num for tso and non-tso case Hardware supports up to 8 TX BD for non-TSO skb and 63 TX BD for TSO skb. Currently hns3 driver does not check the max BD num that required by a skb before filling desc, which may cause the hardware to issue a RAS error throug PCIe AER. This patch adds the max BD num check before filling desc, if the bd num is not within the hardware limit, it will record the error by ring->stats.sw_err_cnt counter and free the skb. This patch also cleans up the hns3_nic_bd_num function by changing the return type and removing an unnecessary check. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b20d7fe5 |
|
08-Aug-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: add some statitics info to tx process This patch adds tx_vlan_err, tx_l4_proto_err, tx_l2l3l4_err and tx_tso_err counter to tx process, in order to better debug the desc filling error. This patch also adds a missing u64_stats_update_* around ring->stats.sw_err_cnt and adds hns3_rl_err to limit the error printing in the IO patch. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
eb977d99 |
|
08-Aug-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: clean up for vlan handling in hns3_fill_desc_vtags This patch refactors the hns3_fill_desc_vtags function by avoiding passing too many parameters, reducing indent level and some other clean up. This patch also adds the hns3_fill_skb_desc function to fill the first desc of a skb. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a4ee7624 |
|
31-Jul-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: minor cleanup in hns3_clean_rx_ring The unused_count variable is used to indicate how many RX BD need attaching new buffer in hns3_clean_rx_ring, and the clean_count variable has the similar meaning. This patch removes the clean_count variable and use unused_count to uniformly indicate the RX BD that need attaching new buffer. This patch also clean up some coding style related to variable assignment in hns3_clean_rx_ring. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a723fb8e |
|
31-Jul-2019 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: refine for set ring parameters Previously, when changing the ring parameters, we free the old ring resources firstly, and then setup the new ring resources. In some case of an memory allocation fail, there will be no resources to use. This patch refines it by setup new ring resources and free the old ring resources in order. Also reduce the max ring BD number to 32760 according to UM. Signed-off-by: Jian Shen <shenjian15@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
dbba6da0 |
|
28-Jul-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: Add support for using order 1 pages with a 4K buffer Hardware supports 0.5K, 1K, 2K, 4K RX buffer size, the RX buffer can not be reused because the hns3_page_order return 0 when page size and RX buffer size are both 4096. So this patch changes the hns3_page_order to return 1 when RX buffer is greater than half of the page size and page size is less the 8192, and dev_alloc_pages has already been used to allocate the compound page for RX buffer. This patch also changes hnae3_* to hns3_* for page order and RX buffer size calculation because they are used in hns3 module. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1c822948 |
|
28-Jul-2019 |
Yonglong Liu <liuyonglong@huawei.com> |
net: hns3: add debug messages to identify eth down cause Some times just see the eth interface have been down/up via dmesg, but can not know why the eth down. So adds some debug messages to identify the cause for this. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
aa3253b8 |
|
28-Jul-2019 |
Guangbin Huang <huangguangbin@huawei.com> |
net: hns3: add a check for get_reset_level For some cases, ops->get_reset_level may not be implemented, so we should check whether it is NULL before calling get_reset_level. Signed-off-by: Guangbin Huang <huangguangbin@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
44950d28 |
|
28-Jul-2019 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: add reset checking before set channels hns3_set_channels() should check the resetting status firstly, since the device will reinitialize when resetting. If the reset has not completed, the hns3_set_channels() may access invalid memory. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d7840976 |
|
22-Jul-2019 |
Matthew Wilcox (Oracle) <willy@infradead.org> |
net: Use skb accessors in network drivers In preparation for unifying the skb_frag and bio_vec, use the fine accessors which already exist and use skb_frag_t instead of struct skb_frag_struct. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b9a8f883 |
|
04-Jul-2019 |
Yonglong Liu <liuyonglong@huawei.com> |
net: hns3: bitwise operator should use unsigned type There are some bitwise operator used signed type, this patch fixes them with unsigned type. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
289f8125 |
|
28-Jun-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: remove RXD_VLD check in hns3_handle_bdinfo The HNS3_RXD_VLD_B bit has already been checked in hns3_add_frag or hns3_handle_rx_bd before calling hns3_handle_bdinfo, so when hns3_handle_bdinfo is called, the HNS3_RXD_VLD_B bit is always set, which makes the checking in hns3_handle_bdinfo unnecessary. This patch removes the RXD_VLD_B checking in hns3_handle_bdinfo. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8b552079 |
|
28-Jun-2019 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: fix a statistics issue about l3l4 checksum error The frame column is based on rx_crc_errors and rx_frame_errors. So l3l4 checksum error should not be counted by rx_crc_errors. Instead, l3l4 checksum error should be counted in ifconfig error column. Fixes: d3ec4ef66937 ("net: hns3: refactor the statistics updating for netdev") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f96315f2 |
|
28-Jun-2019 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: fix __QUEUE_STATE_STACK_XOFF not cleared issue When change MTU or other operations, which just calling .reset_notify to do HNAE3_DOWN_CLIENT and HNAE3_UP_CLIENT, then the netdev_tx_reset_queue() in the hns3_clear_all_ring() will be ignored. So the dev_watchdog() may misdiagnose a TX timeout. This patch separates netdev_tx_reset_queue() from hns3_clear_all_ring(), and unifies hns3_clear_all_ring() and hns3_force_clear_all_ring into one, since they are doing similar things. Fixes: 3a30964a2eef ("net: hns3: delay ring buffer clearing during reset") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9d5e67d1 |
|
20-Jun-2019 |
Weihang Li <liweihang@hisilicon.com> |
net: hns3: remove override_pci_need_reset We add override_pci_need_reset to prevent redundant and unwanted PF resets if a RAS error occurs in commit 69b51bbb03f7 ("net: hns3: fix to stop multiple HNS reset due to the AER changes"). Now in HNS3 driver, we use hw_err_reset_req to record reset level that we need to recover from a RAS error. This variable cans solve above issue as override_pci_need_reset, so this patch removes override_pci_need_reset. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
bf6de231 |
|
18-Jun-2019 |
Krzysztof Kozlowski <krzk@kernel.org> |
net: hns3: Fix inconsistent indenting Fix wrong indentation of goto return. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ad9bf545 |
|
16-Jun-2019 |
Colin Ian King <colin.king@canonical.com> |
net: hns3: fix dereference of ae_dev before it is null checked Pointer ae_dev is null checked however, prior to that it is dereferenced when assigned pointer ops. Fix this by assigning pointer ops after ae_dev has been null checked. Addresses-Coverity: ("Dereference before null check") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ebaf1908 |
|
13-Jun-2019 |
Weihang Li <liweihang@hisilicon.com> |
net: hns3: some variable modification This patch does following things: 1. add the keyword const before some variables which won't be modified in functions. 2. changes some variables from signed to unsigned to avoid bitwise operation on signed variables. 3. adds or removes initialization of some variables. 4. defines a new structure to help parsing mailbox messages instead of using an array which is harder to get the meaning of each element. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3a30964a |
|
13-Jun-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: delay ring buffer clearing during reset The driver may not be able to disable the ring through firmware when downing the netdev during reset process, which may cause hardware accessing freed buffer problem. This patch delays the ring buffer clearing to reset uninit process because hardware will not access the ring buffer after hardware reset is completed. Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
75718800 |
|
13-Jun-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix for dereferencing before null checking The netdev is dereferenced before null checking in the function hns3_setup_tc. This patch moves the dereferencing after the null checking. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d547ecdc |
|
13-Jun-2019 |
Yonglong Liu <liuyonglong@huawei.com> |
net: hns3: free irq when exit from abnormal branch In hns3_nic_init_irq(), if request irq fail at index i, the function return directly without releasing irq resources that already requested, and nowhere else will release them. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
123297b7 |
|
13-Jun-2019 |
Shiju Jose <shiju.jose@huawei.com> |
net: hns3: delay setting of reset level for hw errors until slot_reset is called Presently the error handling code sets the reset level required for the recovery of the hw errors to the reset framework in the error_detected AER callback. However the rest_event would be called later from the slot_reset callback. This can cause issue of using the wrong reset_level if a high priority reset request occur before the slot_reset is called. This patch delays setting of the reset level, required for the hw errors, to the reset framework until the slot_reset is called. Reported-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9b2f3477 |
|
06-Jun-2019 |
Weihang Li <liweihang@hisilicon.com> |
net: hns3: fix some coding style issues This patch fixes some coding style issues reported by some static code analysis tools and code review, such as modify some comments, rename some variables, log some errors in detail, and fixes some alignment errors. BTW, these cleanups do not change the logic of code. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: HuiSong Li <lihuisong@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b69c9737 |
|
06-Jun-2019 |
Yonglong Liu <liuyonglong@huawei.com> |
net: hns3: delete the redundant user NIC codes Since HNAE3_CLIENT_UNIC and HNAE3_DEV_UNIC is not used any more, this patch removes the redundant codes. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4a43caf5 |
|
06-Jun-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: refactor hns3_get_new_int_gl function This patch adds a new hns3_get_new_flow_lvl function to calculate the packet flow level, which is used to decide the interrupt coalescence parameter, in order to make the flow level calculation code more readable and make the future calculation ajdustment easier. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d5970dc7 |
|
06-Jun-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: replace numa_node_id with numa_mem_id for buffer reusing This patch replaces numa_node_id with numa_mem_id when doing buffer reusing checking, because the buffer still can be reused when the buffer is from the nearest node and the local node has no memory attached. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e2ee1c5a |
|
06-Jun-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: make HW GRO handling compliant with SW GRO Currently when a GRO packet is assembled by HW, the checksum is modified to reflect the entire packet by HW and skb->ip_summed is set to CHECKSUM_UNNECESSARY, which is not compliant with SW GRO. This patch sets up skb's network and transport header, sets the GRO packet's checksum according to pseudo header and set the skb->ip_summed to CHECKSUM_PARTIAL. This patch also use gso_size to distinguish GRO packet from normal packet, use eth_type_vlan to check the VLAN type and set the SKB_GSO_TCP_FIXEDID according to BD info during HW GRO info processing. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
661262bc |
|
02-Jun-2019 |
Weihang Li <liweihang@hisilicon.com> |
net: hns3: add a check to pointer in error_detected and slot_reset If we add a VF without loading hclgevf.ko and then there is a RAS error occurs, PCIe AER will call error_detected and slot_reset of all functions, and will get a NULL pointer when we check ad_dev->ops->handle_hw_ras_error. This will cause a call trace and failures on handling of follow-up RAS errors. This patch check ae_dev and ad_dev->ops at first to solve above issues. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b524b38f |
|
02-Jun-2019 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: fix VLAN filter restore issue after reset In orginal codes, the driver only restore VLAN filter entries for PF after reset, the VLAN entries of VF will lose in this case. This patch fixes it by recording VLAN IDs for each function when add VLAN, and restore the VLAN IDs after reset. Fixes: 681ec3999b3d ("net: hns3: fix for vlan table lost problem when resetting") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0d2f68c7 |
|
28-May-2019 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: adjust hns3_uninit_phy()'s location in the hns3_client_uninit() hns3_uninit_phy() should be called before checking HNS3_NIC_STATE_INITED flags, otherwise when this checking fails, there is nobody to call hns3_uninit_phy(). Fixes: c8a8045b2d0a ("net: hns3: Fix NULL deref when unloading driver") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d93ed94f |
|
24-May-2019 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: add aRFS support for PF This patch adds aRFS support for PF. The aRFS rules are also stored in the hardware flow director table, Use the existing filter management functions to insert TCPv4/UDPv4/TCPv6/UDPv6 flow director filters. To avoid rule conflict, once user adds flow director rules with ethtool, the aRFS will be disabled, and clear exist aRFS rules. Once all user configure rules were removed, aRFS can work again. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ffab9691 |
|
24-May-2019 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: initialize CPU reverse mapping Allocate CPU rmap and add entry for each irq. CPU rmap is used in aRFS to get the queue number of the rx completion interrupts. In additional, remove the calling of irq_set_affinity_notifier() in hns3_nic_init_irq(), because we have registered notifier in irq_cpu_rmap_add() for each vector, otherwise it may cause use-after-free issue. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c264ed44 |
|
08-May-2019 |
Colin Ian King <colin.king@canonical.com> |
net: hns3: remove redundant assignment of l2_hdr to itself The pointer l2_hdr is being assigned to itself, this is redundant and can be removed. Addresses-Coverity: ("Evaluation order violation") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
77296bf6 |
|
05-May-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: use devm_kcalloc when allocating desc_cb This patch uses devm_kcalloc instead of kcalloc when allocating ring->desc_cb, because devm_kcalloc not only ensure to free the memory when the dev is deallocted, but also allocate the memory from it's device memory node. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
845e0d1d |
|
05-May-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: some cleanup for struct hns3_enet_ring This patch removes some unused field in struct hns3_enet_ring, use ring->dev for ring_to_dev macro, and use dev consistently in hns3_fill_desc. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
389ca146 |
|
05-May-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: unify the page reusing for page size 4K and 64K When page size is 64K, RX buffer is currently not reused when the page_offset is moved to last buffer. This patch adds checking to decide whether the buffer page can be reused when last_offset is moved beyond last offset. If the driver is the only user of page when page_offset is moved to beyond last offset, then buffer can be reused and page_offset is set to zero. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ce74370c |
|
05-May-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: optimize the barrier using when cleaning TX BD Currently, a barrier is used when cleaning each TX BD, which may cause performance degradation. This patch optimizes it to use one barrier when cleaning TX BD each round. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
aa9d22dd |
|
05-May-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix error handling for desc filling When desc filling fails in hns3_nic_net_xmit, it will call hns3_clear_desc to unmap the dma mapping. But currently the ring->next_to_use points to the desc where the desc filling or dma mapping return error, which means the desc that ring->next_to_use points to has not done the dma mapping, the desc that need unmapping is before the ring->next_to_use. This patch fixes it by calling ring_ptr_move_bw(next_to_use) before doing unmapping operation, and set desc_cb->dma to zero to avoid freeing it again when unloading. Also, when filling skb head or frag fails, both need to unmap all the way back to next_to_use_head, so remove one desc filling error handling. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
757cd1e4 |
|
05-May-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: combine len and checksum handling for inner and outer header. When filling len and checksum info to description, there is some similar checking or calculation. So this patch adds hns3_set_l2l3l4 to fill the inner(/normal) header's len and checksum info. If it is a encapsulation skb, it calls hns3_set_outer_l2l3l4 to handle the outer header's len and checksum info, in order to avoid some similar checking or calculation. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
07918fcd |
|
05-May-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: refactor BD filling for l2l3l4 info This patch separates the inner and outer l2l3l4 len handling in hns3_set_l2l3l4_len, this is a preparation to combine the l2l3l4 len and checksum handling for inner and outer header. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
39c38824 |
|
05-May-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix for tunnel type handling in hns3_rx_checksum According to hardware user manual, the tunnel packet type is available in the rx.ol_info field of struct hns3_desc. Currently the tunnel packet type is decided by the rx.l234_info, which may cause RX checksum handling error. This patch fixes it by using the correct field in struct hns3_desc to decide the tunnel packet type. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
db4970aa |
|
05-May-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: add linearizing checking for TSO case HW requires every continuous 8 buffer data to be larger than MSS, we simplify it by ensuring skb_headlen + the first continuous 7 frags to to be larger than GSO header len + mss, and the remaining continuous 7 frags to be larger than MSS except the last 7 frags. This patch adds hns3_skb_need_linearized to handle it for TSO case. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d21ff4f9 |
|
05-May-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: add counter for times RX pages gets allocated Currently, using "ethtool --statistics" can show how many time RX page have been reused, but there is no counter for RX page not being reused. This patch adds non_reuse_pg counter to better debug the performance issue, because it is hard to determine when the RX page is reused or not if there is no such counter. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fb00331b |
|
05-May-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: use napi_schedule_irqoff in hard interrupts handlers napi_schedule_irqoff is introduced to be used from hard interrupts handlers or when irqs are already masked, see: https://lists.openwall.net/netdev/2014/10/29/2 So this patch replaces napi_schedule with napi_schedule_irqoff. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3d5f3741 |
|
05-May-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: unify maybe_stop_tx for TSO and non-TSO case Currently, maybe_stop_tx ops for TSO and non-TSO case share some BD calculation code, so this patch unifies the maybe_stop_tx by removing the maybe_stop_tx ops. skb_is_gso() can be used to differentiate the case between TSO and non-TSO case if there is need to handle special case for TSO case. This patch also add tx_copy field in "ethtool --statistics" to help better debug the performance issue caused by calling skb_copy. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7b8f622e |
|
25-Apr-2019 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: prevent double free in hns3_put_ring_config() This patch adds a check for the hns3_put_ring_config() to prevent double free, and for more readable, move the NULL assignment of priv->ring_data into the hns3_put_ring_config(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ea485867 |
|
25-Apr-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: handle the BD info on the last BD of the packet The bdinfo handled in hns3_handle_bdinfo is only valid on the last BD of the current packet, currently the bd info may be handled based on the first BD if the packet has more than two BDs, which may cause rx error. This patch fixes it by using the last BD of the current packet in hns3_handle_bdinfo. Also, hns3_set_rx_skb_rss_type has used RSS hash value from the last BD of the current packet, so remove the same last BD calculation in hns3_set_rx_skb_rss_type and call it from hns3_handle_bdinfo. Fixes: e55970950556 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
63380a1a |
|
25-Apr-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix for TX clean num when cleaning TX BD hns3_desc_unused() returns how many BD have been cleaned, but new buffer has not been attached to them. The register of HNS3_RING_RX_RING_FBDNUM_REG returns how many BD need allocating new buffer to or need to cleaned. So the remaining BD need to be clean is HNS3_RING_RX_RING_FBDNUM_REG - hns3_desc_unused(). Also, new buffer can not attach to the pending BD when the last BD is not handled, because memcpy has not been done on the first pending BD. This patch fixes by subtracting the pending BD num from unused_count after 'HNS3_RING_RX_RING_FBDNUM_REG - unused_count' is used to calculate the BD bum need to be clean. Fixes: e55970950556 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
26cda2f1 |
|
25-Apr-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix data race between ring->next_to_clean hns3_clean_tx_ring calls hns3_nic_reclaim_one_desc to clean buffers and set ring->next_to_clean, then hns3_nic_net_xmit reuses the cleaned buffers. But there are no memory barriers when buffers gets recycled, so the recycled buffers can be corrupted. This patch uses smp_store_release to update ring->next_to_clean and smp_load_acquire to read ring->next_to_clean to properly hand off buffers from hns3_clean_tx_ring to hns3_nic_net_xmit. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c43f1255 |
|
22-Apr-2019 |
Stanislav Fomichev <sdf@google.com> |
net: pass net_device argument to the eth_get_headlen Update all users of eth_get_headlen to pass network device, fetch network namespace from it and pass it down to the flow dissector. This commit is a noop until administrator inserts BPF flow dissector program. Cc: Maxim Krasnyansky <maxk@qti.qualcomm.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: intel-wired-lan@lists.osuosl.org Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Cc: Michael Chan <michael.chan@broadcom.com> Cc: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
#
97afd47b |
|
18-Apr-2019 |
Yufeng Mo <moyufeng@huawei.com> |
net: hns3: add function type check for debugfs help information PF supports all debugfs command, but VF only supports part of debugfs command. So VF should not show unsupported help information. This patch adds a check for PF and PF to show the supportable help information. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
bb87be87 |
|
18-Apr-2019 |
Yonglong Liu <liuyonglong@huawei.com> |
net: hns3: Add support for netif message level settings This patch adds support for network interface message level settings. The message level can be changed by module parameter or ethtool. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e511c97d |
|
18-Apr-2019 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: dump more information when tx timeout happens Currently we just print few information when tx timeout happens. In order to find out the cause of timeout, this patch prints more information about the packet statistics, tqp registers and napi state. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fa6c4084 |
|
18-Apr-2019 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: fix loop condition of hns3_get_tx_timeo_queue_info() In function hns3_get_tx_timeo_queue_info(), it should use netdev->num_tx_queues, instead of netdve->real_num_tx_queues as the loop limitation. Fixes: 424eb834a9be ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
beab694a |
|
18-Apr-2019 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: refine tx timeout count handle In current codes, tx_timeout_cnt is used before increased, then we can see the tx_timeout_count is still 0 from the print when tx timeout happens, e.g. "hns3 0000:7d:00.3 eth3: tx_timeout count: 0, queue id: 0, SW_NTU: 0xa6, SW_NTC: 0xa4, HW_HEAD: 0xa4, HW_TAIL: 0xa6, INT: 0x1" The tx_timeout_cnt should be updated before used. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cc5ff6e9 |
|
13-Apr-2019 |
Peng Li <lipeng321@huawei.com> |
net: hns3: free the pending skb when clean RX ring If there is pending skb in RX flow when close the port, and the pending buffer is not cleaned, the new packet will be added to the pending skb when the port opens again, and the first new packet has error data. This patch cleans the pending skb when clean RX ring. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d474d88f |
|
13-Apr-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: add hns3_gro_complete for HW GRO process When a GRO packet is received by driver, the cwr field in the struct tcphdr needs to be checked to decide whether to set the SKB_GSO_TCP_ECN for skb_shinfo(skb)->gso_type. So this patch adds hns3_gro_complete to do that, and adds the hns3_handle_bdinfo to handle the hns3_gro_complete and hns3_rx_checksum. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a4d2cdcb |
|
13-Apr-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: minor refactor for hns3_rx_checksum Change the parameters of hns3_rx_checksum to be more specific to what is used internally, rather than passing in a pointer to the whole hns3_desc. Reduces duplicate code and bring this function inline with the approach used in hns3_set_gro_param. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
44e626f7 |
|
13-Apr-2019 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: fix VLAN offload handle for VLAN inserted by port Currently, in TX direction, driver implements the TX VLAN offload by checking the VLAN header in skb, and filling it into TX descriptor. Usually it works well, but if enable inserting VLAN header based on port, it may conflict when out_tag field of TX descriptor is already used, and cause RAS error. In RX direction, hardware supports stripping max two VLAN headers. For vlan_tci in skb can only store one VLAN tag, when RX VLAN offload enabled, driver tells hardware to strip one VLAN header from RX packet; when RX VLAN offload disabled, driver tells hardware not to strip VLAN header from RX packet. Now if port based insert VLAN enabled, all RX packets will have the port based VLAN header. This header is useless for stack, driver needs to ask hardware to strip it. Unfortunately, hardware can't drop this VLAN header, and always fill it into RX descriptor, so driver has to identify and drop it. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
eb32c896 |
|
06-Apr-2019 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: adjust the timing of hns3_client_stop when unloading hns3_client_stop() should be called after unregister_netdev(), otherwise the ongoing reset task may start the client just after it. Fixes: a6d818e31d08 ("net: hns3: Add vport alive state checking support") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cd513a69 |
|
06-Apr-2019 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: set up the vport alive state while reinitializing When reinitializing, the vport alive state needs to be set up. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1eeb3367 |
|
04-Apr-2019 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: modify HNS3_NIC_STATE_INITED flag in hns3_reset_notify_uninit_enet In the hns3_reset_notify_uninit_enet() HNS3_NIC_STATE_INITED flag should be checked and cleared firstly. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6ff7ed80 |
|
04-Apr-2019 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: prevent change MTU when resetting When resetting, the changing of MTU is not allowed, so this patch adds checking reset status in hns3_nic_change_mtu() to do that. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
389775a6 |
|
04-Apr-2019 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: add protect when handling mac addr list It used netdev->uc and netdev->mc list in function hns3_recover_hw_addr() and hns3_remove_hw_addr(). We should add protect for them. Fixes: f05e21097121 ("net: hns3: Clear mac vlan table entries when unload driver or function reset") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ceca4a5e |
|
04-Apr-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: minor optimization for datapath This patch adds a likely case for hns3_fill_desc and limits the local variables' scope as much as possible, also avoid div operation when the tqp_vector->num_tqps is one. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
bea96410 |
|
21-Mar-2019 |
Moshe Shemesh <moshe@mellanox.com> |
net: Add IANA_VXLAN_UDP_PORT definition to vxlan header file Added IANA_VXLAN_UDP_PORT (4789) definition to vxlan header file so it can be used by drivers instead of local definition. Updated drivers which locally defined it as 4789 to use it. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Cc: John Hurley <john.hurley@netronome.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Yunsheng Lin <linyunsheng@huawei.com> Cc: Peng Li <lipeng321@huawei.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
#
5f543a54 |
|
20-Mar-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix for not calculating tx bd num correctly When there is only one byte in a frag, the current calculation using "(size + HNS3_MAX_BD_SIZE - 1) >> HNS3_MAX_BD_SIZE_OFFSET" will return zero, because HNS3_MAX_BD_SIZE is 65535 and HNS3_MAX_BD_SIZE_OFFSET is 16. So it will cause tx error when a frag's size is one byte. This patch fixes it by using DIV_ROUND_UP. Fixes: 3fe13ed95dd3 ("net: hns3: avoid mult + div op in critical data path") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
69b51bbb |
|
09-Mar-2019 |
Shiju Jose <shiju.jose@huawei.com> |
net: hns3: fix to stop multiple HNS reset due to the AER changes The commit bfcb79fca19d ("PCI/ERR: Run error recovery callbacks for all affected devices") affected the non-fatal error recovery logic for the HNS and RDMA devices. This is because each HNS PF under PCIe bus receive callbacks from the AER driver when an error is reported for one of the PF. This causes unwanted PF resets because the HNS decides which PF to reset based on the reset type set. The HNS error handling code sets the reset type based on the hw error type detected. This patch provides fix for the above issue for the recovery of the hw errors in the HNS and RDMA devices. This patch needs backporting to the kernel v5.0+ Fixes: 332fbf576579 ("net: hns3: add handling of hw ras errors using new set of commands") Reported-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d394d33b |
|
05-Mar-2019 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: add dma_rmb() for rx description HW can not guarantee complete write desc->rx.size, even though HNS3_RXD_VLD_B has been set. Driver needs to add dma_rmb() instruction to make sure desc->rx.size is always valid. Fixes: e55970950556 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f4772dee |
|
06-Mar-2019 |
Dan Carpenter <dan.carpenter@oracle.com> |
net: hns3: Fix a logical vs bitwise typo There were a couple logical ORs accidentally mixed in with the bitwise ORs. Fixes: e8149933b1fa ("net: hns3: remove hnae3_get_bit in data path") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
18655128 |
|
23-Feb-2019 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: fix improper error handling for hns3_client_start If hns3_client_start() failed in the hns3_client_init(), register_dev() should be undo in its error handling. Fixes: a6d818e31d08 ("net: hns3: Add vport alive state checking support") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c0425944 |
|
23-Feb-2019 |
Peng Li <lipeng321@huawei.com> |
net: hns3: add support to config depth for tx|rx ring separately This patch adds support to config depth for tx|rx ring separately by ethtool command "-G". Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e8149933 |
|
23-Feb-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: remove hnae3_get_bit in data path The hnae3_get_bit uses hnae3_get_field, and hnae3_get_field masks the data, which is unnecessary in data path. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cde4ffad |
|
23-Feb-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: replace hnae3_set_bit and hnae3_set_field in data path hnae3_set_bit and hnae3_set_field masks the data before setting the field or bit, which is unnecessary because the data is already zero initialized. Suggested-by: John Garry <john.garry@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0cccebac |
|
23-Feb-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: add unlikely for error handling in data path This patch adds unlikely hint for error handling in critical data path. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d40fa7ee |
|
23-Feb-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: remove some ops in struct hns3_nic_ops The fill_desc ops has only one implementation, and get_rxd_bnum has not been used, so this patch removes them. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
47e7b13b |
|
23-Feb-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: limit some variable scope in critical data path This patch limits some variables' scope as much as possible in hns3_fill_desc. Also, only set l3_type and l4_type when necessary. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3fe13ed9 |
|
23-Feb-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: avoid mult + div op in critical data path This patch uses shift offset to avoid doing mult and div operation. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2a73ac3e |
|
23-Feb-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: add xps setting support for hns3 driver This patch adds xps setting support for hns3 driver based on the interrupt affinity info. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
77af09c6 |
|
02-Feb-2019 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: don't allow user to change vlan filter state When user disables vlan filter, and adds vlan device, it won't notify the driver the update the vlan filter. In this case, when user enables vlan filter again, the packets with new vlan tag will be filtered by vlan filter. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1731be4c |
|
02-Feb-2019 |
Yonglong Liu <liuyonglong@huawei.com> |
net: hns3: Modify parameter type from int to bool in set_gro_en The second parameter to the hook function set_gro_en is always passed in true/false, so modify it's type from int to bool. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6241e71e |
|
02-Feb-2019 |
Peng Li <lipeng321@huawei.com> |
net: hns3: fix an issue for hns3_update_new_int_gl HNS3 supports setting rx-usecs|tx-usecs as 0, but it will not update dynamically when adaptive-tx or adaptive-rx is enable. This patch removes the Redundant check. Fixes: a95e1f8666e9 ("net: hns3: change the time interval of int_gl calculating") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9e50dc11 |
|
02-Feb-2019 |
Peng Li <lipeng321@huawei.com> |
net: hns3: fix a code style issue for hns3_update_new_int_gl() Use the same code style for rx_group and tx_group in the hns3_update_new_int_gl(). Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e2152785 |
|
30-Jan-2019 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: fix netif_napi_del() not do problem when unloading When the driver is unloading, if a global reset occurs, unmap_ring_from_vector() in the hns3_nic_uninit_vector_data() will fail, and hns3_nic_uninit_vector_data() just return. There may be some netif_napi_del() not be done. Since hardware will unmap all ring while resetting, so hns3_nic_uninit_vector_data() should ignore this error, and do the rest uninitialization. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c8a8045b |
|
30-Jan-2019 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: Fix NULL deref when unloading driver When the driver is unloading, if there is a calling of ndo_open occurs between phy_disconnect() and unregister_netdev(), it will end up causing the kernel to eventually hit a NULL deref: [14942.417828] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048 [14942.529878] Mem abort info: [14942.551166] ESR = 0x96000006 [14942.567070] Exception class = DABT (current EL), IL = 32 bits [14942.623081] SET = 0, FnV = 0 [14942.639112] EA = 0, S1PTW = 0 [14942.643628] Data abort info: [14942.659227] ISV = 0, ISS = 0x00000006 [14942.674870] CM = 0, WnR = 0 [14942.679449] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000224ad6ad [14942.695595] [0000000000000048] pgd=00000021e6673003, pud=00000021dbf01003, pmd=0000000000000000 [14942.723163] Internal error: Oops: 96000006 [#1] PREEMPT SMP [14942.729358] Modules linked in: hns3(O) hclge(O) pv680_mii(O) hnae3(O) [last unloaded: hclge] [14942.738907] CPU: 1 PID: 26629 Comm: kworker/u4:13 Tainted: G O 4.18.0-rc1-12928-ga960791-dirty #145 [14942.749491] Hardware name: Huawei Technologies Co., Ltd. D05/D05, BIOS Hi1620 FPGA TB BOOT BIOS B763 08/17/2018 [14942.760392] Workqueue: events_power_efficient phy_state_machine [14942.766644] pstate: 80c00009 (Nzcv daif +PAN +UAO) [14942.771918] pc : test_and_set_bit+0x18/0x38 [14942.776589] lr : netif_carrier_off+0x24/0x70 [14942.781033] sp : ffff0000121abd20 [14942.784518] x29: ffff0000121abd20 x28: 0000000000000000 [14942.790208] x27: ffff0000164d3cd8 x26: ffff8021da68b7b8 [14942.795832] x25: 0000000000000000 x24: ffff8021eb407800 [14942.801445] x23: 0000000000000000 x22: 0000000000000000 [14942.807046] x21: 0000000000000001 x20: 0000000000000000 [14942.812672] x19: 0000000000000000 x18: ffff000009781708 [14942.818284] x17: 00000000004970e8 x16: ffff00000816ad48 [14942.823900] x15: 0000000000000000 x14: 0000000000000008 [14942.829528] x13: 0000000000000000 x12: 0000000000000f65 [14942.835149] x11: 0000000000000001 x10: 00000000000009d0 [14942.840753] x9 : ffff0000121abaa0 x8 : 0000000000000000 [14942.846360] x7 : ffff000009781708 x6 : 0000000000000003 [14942.851970] x5 : 0000000000000020 x4 : 0000000000000004 [14942.857575] x3 : 0000000000000002 x2 : 0000000000000001 [14942.863180] x1 : 0000000000000048 x0 : 0000000000000000 [14942.868875] Process kworker/u4:13 (pid: 26629, stack limit = 0x00000000c909dbf3) [14942.876464] Call trace: [14942.879200] test_and_set_bit+0x18/0x38 [14942.883376] phy_link_change+0x38/0x78 [14942.887378] phy_state_machine+0x3dc/0x4f8 [14942.891968] process_one_work+0x158/0x470 [14942.896223] worker_thread+0x50/0x470 [14942.900219] kthread+0x104/0x130 [14942.903905] ret_from_fork+0x10/0x1c [14942.907755] Code: d2800022 8b400c21 f9800031 9ac32044 (c85f7c22) [14942.914185] ---[ end trace 968c9e12eb740b23 ]--- So this patch fixes it by modifying the timing to do phy_connect_direct() and phy_disconnect(). Fixes: 256727da7395 ("net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoC") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
74354140 |
|
30-Jan-2019 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: change hnae3_register_ae_dev() to int hnae3_register_ae_dev() may fail, and it should return a error code to its caller, so change hnae3_register_ae_dev() return type to int. Also, when hnae3_register_ae_dev() return error, hns3_probe() should do some error handling and return the error code. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1a6e552d |
|
30-Jan-2019 |
liyongxin <liyongxin1@huawei.com> |
net: hns3: reuse the definition of l3 and l4 header info union Union l3_hdr_info and l4_hdr_info have already been defined in the hns3_enet.h, so it is unnecessary to define them elsewhere. This patch removes the redundant definition, and reuses the one defined in the hns3_enet.h. Signed-off-by: liyongxin <liyongxin1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b7b585c2 |
|
26-Jan-2019 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: add initialization for nic state This patch adds initialization for nic state, sets flag HNS3_NIC_STATE_DOWN when initialize, clears it before vectors and napi being enabled in the hns3_nic_net_up(), and sets it back in the error handler. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
51e8439f |
|
26-Jan-2019 |
Peng Li <lipeng321@huawei.com> |
net: hns3: add 8 BD limit for tx flow A single transmit packet can span up to 8 descriptors according to the HW limit. If a skb has more than 8 frags, driver uses skb_copy to get a new skb which has less frags. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1cce5eb6 |
|
26-Jan-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: call hns3_nic_set_real_num_queue with netdev down hns3_client_setup_tc in enet is for updating TC configuration to stack, and hclge_setup_tc in hclge_dcb is mainly for setting the configuration to hardware. This patch removes the hns3_nic_set_real_num_queue from hns3_setup_tc in enet, and call hclge_client_setup_tc to update TC configuration to stack with netdev down, because the netdev down operation is done in hclge_dcb now. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a1ef124e |
|
26-Jan-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: remove dcb_ops->map_update in hclge_dcb After doing down/uninit/init/up in hclge_dcb, it is not necessary to call dcb_ops->map_update in enet, so hclge_map_update can be called directly in hclge_dcb. This is for preparing to call hns3_nic_set_real_num_queue with netdev down when user changes mqprio configuration. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c2a39d98 |
|
26-Jan-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: do reinitialization while mqprio configuration changed When user changes the mqprio configuration, enet need to be uninited and inited besides down'ed and up'ed, because the queue num may change when the TC num changes. Also, it is more suitable to do the down/unint/init/up operation in hclge module using hclge_notify_client, because this config change may affect PF and its VF. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
28673b33 |
|
26-Jan-2019 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: fix broadcast promisc issue for revision 0x20 For revision 0x20, vlan filter is always bypassed when enable broadcast promisc mode. In this case, broadcast packets with any vlan id can be accpeted. We should disable broadcast promisc mode until user want enable it. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ac864c23 |
|
26-Jan-2019 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: clear pci private data when unload hns3 driver When unload hns3 driver, we should clear the pci private data. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
217e288c |
|
26-Jan-2019 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: don't update packet statistics for packets dropped by hardware Packet statistics for netdev should not include the packets dropped by hardware. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ac574b80 |
|
22-Jan-2019 |
Peng Li <lipeng321@huawei.com> |
net: hns3: clear param in ring when free ring Param pending_buf and skb may be not NULL when free ring. This patch clears them when free ring. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
90c68a41 |
|
22-Jan-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix rss configuration lost problem when setting channel Currently rss configuration set by user will be lost when setting channel. This patch fixes it by not setting rss configuration to default if user has configured the rss. Fixes: 09f2af6405b8 ("net: hns3: add support to modify tqps number") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d3ec4ef6 |
|
22-Jan-2019 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: refactor the statistics updating for netdev In origin codes, there are some statistics item are got from mac, which also include the packets statistics of VF. It is unreasonable. This patch fixes it by counting them in the rx/tx processing flow. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c376fa1a |
|
22-Jan-2019 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: add rx multicast packets statistic This patch adds rx multicast packets statistic for each ring. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1f609492 |
|
18-Jan-2019 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: add HNAE3_RESTORE_CLIENT interface in enet module The HNAE3_INIT_CLIENT interface is also used when changing tc configuration, vlan/mac hardware table does not need to be restored when tc configuration changes. This patch adds a HNAE3_RESTORE_CLIENT interface to restore the vlan/mac hardware table when resetting. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
af013903 |
|
18-Jan-2019 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: do reinitialization while ETS configuration changed When the ETS information is changed, the network device needs to be re-initialized, otherwise the information such as the receiving queue will be incorrect. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c78b5b6c |
|
18-Jan-2019 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: modify parameter checks in the hns3_set_channels The number of queues for each enabled TC should range from 1 to the maximum available value, and return directly if the value is same as the current one. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
65749f73 |
|
18-Jan-2019 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: reuse reinitialization interface in the hns3_set_channels There is already common interface for network device reinitialization, so hns3_set_channels() should just call them. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
be5929b8 |
|
18-Jan-2019 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: remove unnecessary hns3_adjust_tqps_num The parameter passed to hns3_set_channels() are already the number of queues per channel of the enabled TC, so it is not need to divide the number of enabled TCs. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a81aca01 |
|
18-Jan-2019 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: remove unused member in struct hns3_enet_ring The irq_init_flag field in struct hns3_enet_ring is unnecessary. This patch removes it. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2c9dd668 |
|
18-Jan-2019 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: modify enet reinitialization interface hns3_reset_notify_init_enet and hns3_reset_notify_uninit_enet are the reinitialization interface that will be called when the device reset, the number of TC changed, or the queue length changed. So these two function should call hns3_get_ring_config() and hns3_put_ring_config() to allocate and free memory for the ring with the correct number. Also this patch fixes a double free problem when hns3_reset_notify_uninit_enet calling hns3_nic_dealloc_vector_data Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
750afb08 |
|
04-Jan-2019 |
Luis Chamberlain <mcgrof@kernel.org> |
cross-tree: phase out dma_zalloc_coherent() We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
|
#
e8884027 |
|
30-Dec-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT For HNAE3_DOWN_CLIENT calling hns3_nic_net_stop(), HNAE3_UP_CLIENT should call hns3_nic_net_open(), since if the number of queue or the map of TC has is changed before HHAE3_UP_CLIENT is called, it will cause problem. Also the HNS3_NIC_STATE_RESETTING flag needs to be cleared before hns3_nic_net_open() called, and set it back while hns3_nic_net_open() failed. Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
31a16f99 |
|
19-Dec-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: fix the descriptor index when get rss type Driver gets rss information from the last descriptor of the packet. When driver handle the rss type, ring->next_to_clean indicates the first descriptor of next packet. This patch fix the descriptor index with "ring->next_to_clean - 1". Fixes: 232fc64b6e62 ("net: hns3: Add HW RSS hash information to RX skb") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
75edb610 |
|
19-Dec-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: add max vector number check for pf Each pf supports max 64 vectors and 128 tqps. For 2p/4p core scenario, there may be more than 64 cpus online. So the result of min_t(u16, num_Online_cpus(), tqp_num) may be more than 64. This patch adds check for the vector number. Fixes: dd38c72604dc ("net: hns3: fix for coalesce configuration lost during reset") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8cdb992f |
|
19-Dec-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: refine the handle for hns3_nic_net_open/stop() When triggering nic down, there is a time window between bringing down the protocol stack and stopping the work task. If the net is up in the time window, it may bring up the protocol stack again. This patch fixes it by stop the work task at the beginning of hns3_nic_net_stop(). To keep symmetrical, start the work task at the end of hns3_nic_net_open(). Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7445565c |
|
18-Dec-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: update coalesce param per second coalesce param updates every 100 napi times, it may update a little late if ping test after a high rate flow, may over napi poll is called 100 times as ping test sends packets every second. This patch updates coalesce param every second, instead with every 100 napi times. It can not update the param 100% in time, but the lag time is very short. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ae6017a7 |
|
18-Dec-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: fix incomplete uninitialization of IRQ in the hns3_nic_uninit_vector_data() In the hns3_nic_uninit_vector_data(), the procedure of uninitializing the tqp_vector's IRQ has not set affinity_notify to NULL and changes its init flag. This patch fixes it. And for simplificaton, local variable tqp_vector is used instead of priv->tqp_vector[i]. Fixes: 424eb834a9be ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
531eba0f |
|
18-Dec-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: fix napi_disable not return problem While doing DOWN, the calling of napi_disable() may not return, since the napi_complete() in the hns3_nic_common_poll() will never be called when HNS3_NIC_STATE_DOWN is set. So we need to call napi_complete() before checking HNS3_NIC_STETE_DOWN. Fixes: ff0699e04b97 ("net: hns3: stop napi polling when HNS3_NIC_STATE_DOWN is set") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cda69d24 |
|
18-Dec-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: fix error handling int the hns3_get_vector_ring_chain When hns3_get_vector_ring_chain() failed in the hns3_nic_init_vector_data(), it should do the error handling instead of return directly. Also, cur_chain should be freed instead of chain and head->next should be set to NULL in error handling of hns3_get_vector_ring_chain. This patch fixes them. Fixes: 73b907a083b8 ("net: hns3: bugfix for buffer not free problem during resetting") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
381c356e |
|
07-Dec-2018 |
Shiju Jose <shiju.jose@huawei.com> |
net: hns3: rename process_hw_error function This patch renames process_hw_error function to handle_hw_ras_error function to match the purpose of the function. This is because hw errors reported through ras and msix interrupts will be handled separately. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b2292360 |
|
22-Nov-2018 |
liuzhongzhu <liuzhongzhu@huawei.com> |
net: hns3: Add debugfs framework registration Add the debugfs framework to the driver and create a debugfs command interface for each device. example command: "echo queue info > cmd" Query the packet forwarding queue information. Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cdca4c48 |
|
17-Nov-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: up/down netdev in hclge module when setting mtu Currently netdev is down in enet module, and it is before mtu range checking in hclge module, which may be cause netdev being down unnecessarily. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a6d818e3 |
|
17-Nov-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: Add vport alive state checking support Currently there is no way for pf to know if a vf device is alive or not, so PF does not know which vf to notify when reset happens, or which vf's mtu is invalid when vf and pf share the same hardware mtu setting. This patch adds vport alive state checking support, in order to support the above scenario. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e6d7d79d |
|
17-Nov-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: Refactor mac mtu setting related functions This patch refactors mac mtu setting related functions, normalizes the use of mps and mtu. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a0b43717 |
|
17-Nov-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: Support two vlan header when setting mtu This patch adds supports for two vlan header when setting mtu. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a6d53b97 |
|
15-Nov-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: Adds GRO params to SKB for the stack When HW GRO enable, protocol stack will not do GRO again, driver should add gro param to the skb for the protocol stack.. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
81ae0e04 |
|
15-Nov-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: Add skb chain when num of RX buf exceeds MAX_SKB_FRAGS MAX_SKB_FRAGS in protocol stack is defined as: MAX_SKB_FRAGS is 17 when PAGE_SIZE is 4K. If HW enable GRO, it may merge small packets and the rx buffer may be more than MAX_SKB_FRAGS. So driver will add skb chain when RX buffer num. more than MAX_SKB_FRAGS. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5c9f6b39 |
|
15-Nov-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: Add support for ethtool -K to enable/disable HW GRO This patch adds support of ethtool -K to enable/disable hardware GRO in HNS3 PF/VF driver. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e5597095 |
|
15-Nov-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll The "FE bit" in the description means the last description for a packets. When HW GRO enable, HW write data to ring every packet/buffer, there is greater probability that driver handle with the describtion but HW still not set the "FE bit". When drier handle the packet and HW still not set "FE bit", driver stores skb and bd_num in rx ring, and continue to use the skb and bd_num in next napi. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b26a6fea |
|
15-Nov-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: Enable HW GRO for Rev B(=0x21) HNS3 hardware HNS3 hardware Revision B(=0x21) supports Hardware GRO feature. This patch enables this feature in the HNS3 PF/VF driver. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
862d969a |
|
09-Nov-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: do VF's pci re-initialization while PF doing FLR While doing PF FLR, VF's PCIe configuration space will be cleared, so the pci and vector of VF should be re-initialized in the VF's reset process while PF doing FLR. Also, this patch fixes some memory not freed problem when pci re-initialization is done during reset process. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6b9a97ee |
|
09-Nov-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: add PCIe FLR support for PF This patch implements the .reset_prepare and .reset_done ops from pci framework to support the PF FLR. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ff0699e0 |
|
09-Nov-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: stop napi polling when HNS3_NIC_STATE_DOWN is set When calling napi_disable during reset down process, if NAPIF_STATE_MISSED is set, napi_complete will call __napi_schedule to do the polling again. So this patch uses HNS3_NIC_STATE_DOWN to ensure the polling is not scheduled again. Also, when napi_complete returns true, it means polling is scheduled again, it is not neccssary to enable the interrupt. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e12c2252 |
|
07-Nov-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: bugfix for not checking return value hns3_reset_notify_init_enet() only return error early if the return value of hns3_restore_vlan() is not 0. This patch adds checking for the return value of hns3_restore_vlan. Fixes: 7fa6be4fd2f6 ("net: hns3: fix incorrect return value/type of some functions") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0742ed7c |
|
06-Nov-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: move some reset information from hnae3_handle into hclge_dev/hclgevf_dev Saving reset related information in the hclge_dev/hclgevf_dev structure is more suitable than the hnae3_handle, since hardware related information is kept in these two structure. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
257e4f29 |
|
06-Nov-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: use HNS3_NIC_STATE_RESETTING to indicate resetting While hclge is going to reset, it will notify its client with HNAE3_DOWN_CLIENT, so this client should get into a resetting status from this moment, other operations from the stack need to be blocked as well. And when the reset is finished, the client will be notified with HNAE3_UP_CLIENT, so this is the end of the resetting status. This patch uses HNS3_NIC_STATE_RESETTING flag to implement that, and adds hns3_nic_resetting() to indicate which operation is not allowed. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8df0fa91 |
|
06-Nov-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: enable/disable ring in the enet while doing UP/DOWN While hardware gets into reset status, the firmware will not respond to driver's command request, which may cause ring not disabled problem during reset process. So this patch uses register instead of command to enable/disable the ring in the enet while doing UP/DOWN operation. Also, HNS3_RING_RX_VM_REG is previously unused, so change it to the correct meaning, and add a wrapper function for readl(). Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7edff533 |
|
06-Nov-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: adjust the location of clearing the table when doing reset When doing a function reset, the hardware table should be cleared before the hardware reset. In current code, this clearing is done in hns3_reset_notify_uninit_enet, but it is too late, because the hardware reset is already done, hns3_reset_notify_down_enet is more suitable to do that. Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
814da63c |
|
06-Nov-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: use HNS3_NIC_STATE_INITED to indicate the initialization state of enet Besides of module_init and module_exit, the process of reset will also uninitialize and initialize the enet client. When reset process fails with enet client uninitialized, the module_exit does not need to uninitialize the enet client, otherwise it may cause double uninitialization problem. So we need the HNS3_NIC_STATE_INITED flag to indicate whether the enet client is initialized. Also HNS3_NIC_STATE_REINITING is previously unused, so change it to HNS3_NIC_STATE_INITED. Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7fa6be4f |
|
30-Oct-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: fix incorrect return value/type of some functions There are some functions that, when they fail to send the command, need to return the corresponding error value to its caller. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Fixes: 681ec3999b3d ("net: hns3: fix for vlan table lost problem when resetting") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5faaf075 |
|
30-Oct-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: remove unnecessary queue reset in the hns3_uninit_all_ring() It is not necessary to reset the queue in the hns3_uninit_all_ring(), since the queue is stopped in the down operation, and will be reset in the up operation. And the judgment of the HCLGE_STATE_RST_HANDLING flag in the hclge_reset_tqp() is not correct, because we need to reset tqp during pf reset, otherwise it may cause queue not being reset to working state problem. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
73b907a0 |
|
30-Oct-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: bugfix for buffer not free problem during resetting When hns3_get_ring_config()/hns3_queue_to_ring()/ hns3_get_vector_ring_chain() failed during resetting, the allocated memory has not been freed before these three functions return. So this patch adds error handler in these functions to fix it. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ece4bf46 |
|
30-Oct-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: add error handler for hns3_nic_init_vector_data() When hns3_nic_init_vector_data() fails to map ring to vector, it should cancel the netif_napi_add() that has been successfully done and then exits. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6ae4e733 |
|
19-Oct-2018 |
Shiju Jose <shiju.jose@huawei.com> |
net: hns3: Add PCIe AER error recovery This patch adds the error recovery for the HNS hw errors. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5a9f0eac |
|
19-Oct-2018 |
Shiju Jose <shiju.jose@huawei.com> |
net: hns3: Add PCIe AER callback error_detected Set of hw errors occurred in the HNS3 are reported to the hns3 driver through PCIe AER and RAS.The error info will be processed and appropriately recovered. This patch adds error_detected callback and error processing. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
bcdb12b7 |
|
16-Oct-2018 |
Fuyun Liang <liangfuyun1@huawei.com> |
net: hns3: fix for multiple unmapping DMA problem When sending a big fragment using multiple buffer descriptor, hns3 does one maping, but do multiple unmapping when tx is done, which may cause unmapping problem. To fix it, this patch makes sure the value of desc_cb.length of the non-first bd is zero. If desc_cb.length is zero, we do not unmap the buffer. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ba3f808f |
|
16-Oct-2018 |
Fuyun Liang <liangfuyun1@huawei.com> |
net: hns3: rename hns_nic_dma_unmap To keep symmetrical, this patch renames hns_nic_dma_unmap to hns3_clear_desc. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1e8a7977 |
|
16-Oct-2018 |
Fuyun Liang <liangfuyun1@huawei.com> |
net: hns3: add handling for big TX fragment This patch unifies big tx fragment handling for tso and non-tso case. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5188f218 |
|
16-Oct-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: move DMA map into hns3_fill_desc To solve the L3 checksum error problem which happens when driver does not clear L3 checksum, DMA map should be done after calling skb_cow_head. This patch moves DMA map into hns3_fill_desc to ensure that DMA map is done after calling skb_cow_head. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0bbbf15d |
|
16-Oct-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: remove hns3_fill_desc_tso This patch removes hns3_fill_desc_tso in preparation for fixing some desc filling bug, because for tso or non-tso case, we will use the unified hns3_fill_desc. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7325523a |
|
12-Oct-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Resume promisc mode and vlan filter status after reset This patch resumes promisc mode and vlan filter status after reset. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c60edc17 |
|
12-Oct-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Enable promisc mode when mac vlan table is full Currently, the driver does nothing when mac vlan table is full. In this case, the packet with new mac address will be dropped by hardware. This patch adds check for the result of sync mac address, and enable promisc mode when mac vlan table is full. Furtherly, disable vlan filter when enable promisc by user command. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
232fc64b |
|
10-Oct-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: Add HW RSS hash information to RX skb Drivers should call skb_set_hash to set the hash and its type in an skbuff. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
701a6d6a |
|
05-Oct-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Fix for rx vlan id handle to support Rev 0x21 hardware In revision 0x20, we use vlan id != 0 to check whether a vlan tag has been offloaded, so vlan id 0 is not supported. In revision 0x21, rx buffer descriptor adds two bits to indicate whether one or more vlan tags have been offloaded, so vlan id 0 is valid now. This patch seperates the handle for vlan id 0, add vlan id 0 support for revision 0x21. Fixes: 5b5455a9ed5a ("net: hns3: Add STRP_TAGP field support for hardware revision 0x21") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1f6db589 |
|
05-Oct-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Drop depricated mta table support For mta table support has been dropped, remove the code for mta table. Signed-off-by: Zhongzhu Liu <liuzhongzhu@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f05e2109 |
|
05-Oct-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Clear mac vlan table entries when unload driver or function reset In original codes, the mac vlan table entries are not cleared when unload hns3 driver. The dirty mac vlan table entries will make the result of looking up mac vlan table being unexpected. When doing core reset or global reset, the firmware will clear all the tables for driver, and driver shouldn't send any commands to firmware during reset. But when doing function reset, the driver needs to clear the tables itself. This patch clears the mac vlan table entries for each client when unload driver or reset. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c17852a8 |
|
30-Sep-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Add support for enable/disable flow director This patch adds switch for flow director with ethtool command Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
dc5e6064 |
|
30-Sep-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Remove all flow director rules when unload hns3 driver This patch removes all flow director rules when unload hns3 driver. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6871af29 |
|
30-Sep-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Add reset handle for flow director When doing reset, remove all entries in TCAM block, and keep flow director rules list. After finishing reset, restore all entries. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d695964d |
|
30-Sep-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Add flow director initialization Flow director is a new feature supported by hardware with revision 0x21. This patch adds flow direcor initialization for each PF. It queries flow director mode and tcam resource from firmware, selects tuples used for input key. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e4fd7502 |
|
26-Sep-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: Fix loss of coal configuration while doing reset The user's coal configuration will be lost after reset, so the tx_coal and rx_coal fields are added to the struct hns_nic_priv to save the coal configuration and used to restore the user's configuration after the reset is complete. Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0d43bf45 |
|
26-Sep-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: Modify hns3_get_max_available_channels The current hns3_get_max_available_channels returns the total number of queues for the device, which makes ethtool -L set the number of queues per channel queues incorrectly, so hns3_get_max_available_channels should return the maximum available number of queues per channel, depending on the total number of queues allocated and the hardware configurations. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
93d8daf4 |
|
26-Sep-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: Fix for netdev not up problem when setting mtu Currently hns3_nic_change_mtu will try to down the netdev before setting mtu, and it does not up the netdev when the setting fails, which causes netdev not up problem. This patch fixes it by not returning when the setting fails. Fixes: a8e8b7ff3517 ("net: hns3: Add support to change MTU in HNS3 hardware") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5b71ac3c |
|
26-Sep-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: Add support for sctp checksum offload This patch adds support for sctp checksum offload. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
75e98535 |
|
21-Sep-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Remove print messages for error packet There are already multiple types packets statistics for error packets, it's unnecessary to print them, which may affect the rx performance if print too many. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2211f4e1 |
|
21-Sep-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Add unlikely for dma_mapping_error check For dma_mapping_error is unlikely happened, this patch adds unlikely for dma_mapping_error check. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7a810110 |
|
21-Sep-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Add nic state check before calling netif_tx_wake_queue When nic down, it firstly calls netif_tx_stop_all_queues(), then calls napi_disable(). But napi_disable() will wait current napi_poll finish, it may call netif_tx_wake_queue(). This patch fixes it by add nic state checking. Fixes: 424eb834a9be ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fa7a4bd5 |
|
21-Sep-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Add handle for default case There are a few "switch-case" codes missed handle for default case. For some abnormal case, it should return error code instead of return 0. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
26483246 |
|
19-Sep-2018 |
Xi Wang <wangxi11@huawei.com> |
net: hns3: Add support for hns3_nic_netdev_ops.ndo_do_ioctl This patch adds the .ndo_do_ioctl net_device_ops operation to support the PHY MII ioctl for PF driver. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
799997a3 |
|
19-Sep-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: Remove tx budget to clean more TX descriptors in a napi The the actual Tx work is minimal, driver can clean up as more Tx descriptors as possible in a irq. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
932d1252 |
|
19-Sep-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: Add unlikely for buf_num check This patch adds unlikely for buf_num check. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
874bff0b |
|
19-Sep-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: Add default irq affinity All irq will float to cpu0 if do not set irq affinity. This patch adds default irq affinity in hns3 driver, users can also change the irq affinity in OS. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ce2c1d2e |
|
03-Sep-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: Implement shutdown ops in hns3 pci driver This patch implements shutdown ops in hns3 pci driver, which unloads the hns3 driver and set the power state to D3hot. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
583e7281 |
|
22-Aug-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: modify variable type in hns3_nic_reuse_page 'truesize' is supposed to be u32, not int, so fix it. Signed-off-by: Huazhong tan <tanhuazhong@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3e85af6a |
|
14-Aug-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: Add vlan filter setting by ethtool command -K Revision(0x20) HW does not support enabling or disabling individual netdev's HW_VLAN_CTAG_FILTER feature, and Revision(0x21) supports enabling or disabling individual netdev's HW_VLAN_CTAG_FILTER feature. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1c772154 |
|
14-Aug-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: Set tx ring' tc info when netdev is up The HNS3_RING_TX_RING_TC_REG register is used to map tx ring to specific tc, the tx queue to tc mapping is needed by the hardware to do the correct tx schedule. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
26a07ccc |
|
14-Aug-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: Remove tx ring BD len register in hns3_enet There is no HNS3_RING_TX_RING_BD_LEN_REG register according to UM, so this patch removes it. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
be44b3af |
|
07-Aug-2018 |
Gustavo A. R. Silva <gustavo@embeddedor.com> |
net: hns3: Mark expected switch fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 114789 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
07acf909 |
|
03-Aug-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Fix MSIX allocation issue for VF The msix number for vf is different, depends on the max vf number. Futherly if the vf supports roce, the offset of msix is not fixed. It's incorrect to fix the msix number to 33. This patch fixes it by querying the msix number from firmware, and adjusting it with roce support. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d71d8381 |
|
19-Jul-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Add SPDX tags to HNS3 PF driver Add the SPDX identifiers to HNS3 PF driver. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ef0c5009 |
|
19-Jul-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Fix misleading parameter name The input parameter "dev" of hns3_irq_handle() is indeed used as a tqp vector, it is misleadin. The struct member "flag" is used to indicate ring type, so rename it. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
82b53214 |
|
16-Jul-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: Fix for reset_level default assignment probelm handle->reset_level is assigned to HNAE3_NONE_RESET when client is initialized, if a tx timeout happens right after initialization, then handle->reset_level is not resetted to HNAE3_FUNC_RESET in hclge_reset_event, which will cause reset event not properly handled problem. This patch fixes it by setting handle->reset_level properly when client is initialized. Fixes: 6d4c3981a8d8 ("net: hns3: Changes to make enet watchdog timeout func common for PF/VF") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d62eccae |
|
16-Jul-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: remove unnecessary ring configuration operation while resetting The configuration of the ring will be used to reinitialize the ring after the hardware reset is completed. So we should not release and reacquire this configuration during reset. Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6b1385cc |
|
16-Jul-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: Fix return value error in hns3_reset_notify_down_enet When doing reset, netdev has not been brought up is not an error, it means that we do not need do the stop operation, so just return zero. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5c897197 |
|
06-Jul-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: Fix for l4 checksum offload bug Hardware only support tcp/udp/sctp l4 checksum offload, but the driver currently tell hardware to do l4 checksum offlad when l3 is IPv4 or IPv6, which may cause checksumm error. This patch fixes it by only enabling the l4 offload when l4 is tcp/udp/sctp. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a75a8efa |
|
06-Jul-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: Fix tc setup when netdev is first up Currently, tc related configuration is not setup when the netdev is first up, which cause the stack only using tc 0 problem. This patch fixes it by setting the tc related configuration using the info from NCL_CONFIG when netdev is first up. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8c3689fc |
|
04-Jul-2018 |
Colin Ian King <colin.king@canonical.com> |
net: hns3: remove redundant variable 'protocol' Variable 'protocol' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'protocol' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e4e87715 |
|
02-Jul-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: modify hnae_ to hnae3_ For consistency, prefix hnae_ should be modified to hnae3_. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
024cc792 |
|
02-Jul-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: use dma_zalloc_coherent instead of kzalloc/dma_map_single Reference to Documentation/DMA-API-HOWTO.txt, Streaming DMA mappings which are usually mapped for one DMA transfer, Network card DMA ring descriptors should use Consistent DMA mappings. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
43e2b1c7 |
|
27-Jun-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: remove the Redundant put_vector in hns3_client_uninit The interface h->ae_algo->ops->put_vector is called in both hns3_nic_dealloc_vector_data and hns3_nic_uninit_vector_data in hns3_client_uninit, this will cause vector freed twice. This patch remove the Redundant put_vector to make vector freed only once. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0e6084aa |
|
27-Jun-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: add unlikely for error check The first bd of a packet is invalid and invalid ring head for tx IRQ is not offen, they may occur when there is error, Add unlikely for error check branch is better for performance. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
94c5e532 |
|
27-Jun-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: add l4_type check for both ipv4 and ipv6 HW supports UDP, TCP and SCTP packets checksum for both ipv4 and ipv6, but do not support other type packets checksum for ipv4 or ipv6. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a86854d0 |
|
12-Jun-2018 |
Kees Cook <keescook@chromium.org> |
treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
|
#
40cca1c5 |
|
01-Jun-2018 |
Xi Wang <wangxi11@huawei.com> |
net: hns3: Optimize the PF's process of updating multicast MAC In the current process, the multicast MAC is added to both MAC_VLAN table and MTA table, this will reduce the utilization of the resource. This patch improves the process of adding multicast MAC address, the new process starts using the MTA table to add multicast MAC after the MAC_VLAN table is full, and the MTA is disable if it is no longer used. Signed-off-by: Xi Wang <wangxi11@huawei.com> Reviewed-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3db084d2 |
|
01-Jun-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: Fix for vxlan tx checksum bug when skb->encapsulation is 0, skb->ip_summed is CHECKSUM_PARTIAL and it is udp packet, which has a dest port as the IANA assigned. the hardware is expected to do the checksum offload, but the hardware will not do the checksum offload when udp dest port is 4789. This patch fixes it by doing the checksum in software. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c7fc8fb6 |
|
01-Jun-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Fix setting mac address error When doing function reset or insmod hns3 dirver after rmmod, the entries of mac vlan table are not cleared, which may cause init mac address failed. This patch fixes it by clearing the old mac address when doing function reset or rmmod hns3 driver. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5ec2a51e |
|
01-Jun-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Add repeat address checking for setting mac address Add checking for new mac address. It doesn't need to config the mac vlan table if it's already in use. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3b75c3df |
|
01-Jun-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: Add support for IFF_ALLMULTI flag This patch adds support for IFF_ALLMULTI flag to HNS3 PF and VF driver. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7b763f3f |
|
25-May-2018 |
Fuyun Liang <liangfuyun1@huawei.com> |
net: hns3: Clear TX/RX rings when stopping port & un-initializing client When we down the port, some packets are left in TX/RX buffer. When we up the port again, these old packets are forwarded to protocol stack or are sent to internet. It will make some problem. TX/RX buffer should be cleared when stopping port. This patch adds some function to ensure the buffer is clean when port is started. We should clear the rings when clients are being un-initialized as well. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6986df96 |
|
25-May-2018 |
Fuyun Liang <liangfuyun1@huawei.com> |
net: hns3: Removes unnecessary check when clearing TX/RX rings Our code will ensure that hns3_clear_tx_ring is not used to cleared RX rings and hns3_clear_rx_ring is not used to cleared TX rings. So the ring type check is unnecessary. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7d0b130c |
|
25-May-2018 |
Fuyun Liang <liangfuyun1@huawei.com> |
net: hns3: Fixes the init of the VALID BD info in the descriptor RX Buffer Descriptor contains a VALID bit which indicates if the BD is valid and has some data. This field is set by HNS3 hardware to intimate the driver of some valid data present in the BD. nd should be reset by the driver when BD is being used again. In the existing code this bit was not being (re-)initialized properly and hence was causing problems. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5b5455a9 |
|
25-May-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: Add STRP_TAGP field support for hardware revision 0x21 Hardware Revision(0x21) Buffer Descriptor adds a field STRP_TAGP for vlan stripped processed indication. STRP_TAGP field has 2 bits, bit 0 is stripped indication of the vlan tag in outer vlan tag field, bit 1 is stripped indication of the vlan tag in inner vlan tag field. For each bit, 0 indicates the tag is not stripped and 1 indicates the tag is stripped. This patch adds STRP_TAGP support for revision(0x21), and does not change the revision(0x20) action. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
846fcc83 |
|
25-May-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: Updates RX packet info fetch in case of multi BD In the latest revision of the hardware, if a packet is spanning across multiple BDs then only VLD bit and current data size info is valid in each BD, and rest of the information is only valid in the last BD of the packet. In such case we should make sure we are fetching RX packet size from the first descriptor and information like VLAN should be fetched from last BD. Signed-off-by: Peng Li <lipeng321@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3c7624d8 |
|
19-May-2018 |
Xi Wang <wangxi11@huawei.com> |
net: hns3: Fix for hns3 module is loaded multiple times problem If the hns3 driver has been built into kernel and then loaded with the same driver which built as KLM, it may trigger an error like below: [ 20.009555] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 20.016789] hns3: Copyright (c) 2017 Huawei Corporation. [ 20.022100] Error: Driver 'hns3' is already registered, aborting... [ 23.517397] Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [ 23.691583] Process insmod (pid: 1982, stack limit = 0x00000000cd5f21cb) [ 23.698270] Call trace: [ 23.700705] __list_del_entry_valid+0x2c/0xd8 [ 23.705049] hnae3_unregister_client+0x68/0xa8 [ 23.709487] hns3_init_module+0x98/0x1000 [hns3] [ 23.714093] do_one_initcall+0x5c/0x170 [ 23.717918] do_init_module+0x64/0x1f4 [ 23.721654] load_module+0x1d14/0x24b0 [ 23.725390] SyS_init_module+0x158/0x208 [ 23.729300] el0_svc_naked+0x30/0x34 This patch fixes it by adding module version info. Fixes: 38caee9d3ee8 ("net: hns3: Add support of the HNAE3 framework") Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
13562d1f |
|
19-May-2018 |
Xi Wang <wangxi11@huawei.com> |
net: hns3: Fix the missing client list node initialization This patch fixes the missing initialization of the client list node in the hnae3_register_client() function. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e63cd65f |
|
19-May-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: Fixes API to fetch ethernet header length with kernel default During the RX leg driver needs to fetch the ethernet header length from the RX'ed Buffer Descriptor. Currently, proprietary version hns3_nic_get_headlen is being used to fetch the header length which uses l234info present in the Buffer Descriptor which might not be valid for the first Buffer Descriptor if the packet is spanning across multiple descriptors. Kernel default eth_get_headlen API does the job correctly. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Peng Li <lipeng321@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
743e1a84 |
|
19-May-2018 |
Salil Mehta <salil.mehta@huawei.com> |
net: hns3: Fixes error reported by Kbuild and internal review This patch fixes the error reported by Intel's kbuild and fixes a return value in one of the legs, caught during review of the original patch sent by kbuild. Fixes: fdb793670a00 ("net: hns3: Add support of .sriov_configure in HNS3 driver") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fa8d82e8 |
|
15-May-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: Add support of .sriov_configure in HNS3 driver As HNS3 driver will enable SRIOV default and enable all VFs the HW support, if PF and VF driver compiled to kernel, VF driver will work on host default, it is not right. This patch adds support for hns3_driver.sriov_configure to support user configs the VF_num, and do not enable sriov default. Signed-off-by: Peng Li <lipeng321@huawei.com> Suggested-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
50fbc237 |
|
15-May-2018 |
Fuyun Liang <liangfuyun1@huawei.com> |
net: hns3: Change return type of hnae3_register_ae_dev If hclge.ko has not been inserted, the value of ret always is zero in hnae3_register_ae_dev. If hclge.ko has been inserted, the value of ret is zero or non zero. Different execution ways have different results. It is confusing. The ae_dev which is initialized failed can be reinitialized when we remove hclge.ko and insert it again. For the case initializing client instance, it is just like the case initializing ae_dev. The main function of hnae3_register_ae_dev is adding the ae_dev to ad_dev list. Because adding ae_dev is always ok, we does not need to return any in this function. This patch changes the return type of hnae3_register_ae_dev from int to void. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2312e050 |
|
15-May-2018 |
Fuyun Liang <liangfuyun1@huawei.com> |
net: hns3: Fix for deadlock problem occurring when unregistering ae_algo When hnae3_unregister_ae_algo is called by PF, pci_disable_sriov is called. And then, hns3_remove is called by VF. We get deadlocked in this case. Since VF pci device is dependent on PF pci device, When PF pci device is removed, VF pci device must be removed. Also, To solve the deadlock problem, VF pci device should be removed before PF pci device is removed. This patch moves pci_enable/disable_sriov from hclge to hns3 to solve the deadlock problem. Also, we do not need to return EPROBE_DEFER in hnae3_register_ae_dev, because SRIOV is no longer enabled in the context calling hnae3_register_ae_dev. Mutex_trylock can be replaced with mutex_lock. Fixes: 424eb834a9be ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
beebca3a |
|
09-May-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix for cleaning ring problem The head or tail in hardware is not longer valid when resetting, current hns3_clear_all_ring use them to clean the ring, which will cause problem during resetting. This patch fixes it by using next_to_use and next_to_clean in the ring struct. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0a78a1df |
|
09-May-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: remove add/del_tunnel_udp in hns3_enet module The add/del_tunnel_udp is not implemented in hclge_main moulde, the NETIF_F_RX_UDP_TUNNEL_PORT feature bit is added automatically by stack when ndo_udp_tunnel_add is not null in dev->netdev_ops. This patch removes the add/del_tunnel_udp related function, for we do not support this feature now. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f09555ff |
|
09-May-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: Fix for setting mac address when resetting When hns3_init_mac_addr is called during reset process, it will get the mac address from NCL_CONFIG and set it to hardware. If user has changed the mac address, then the mac address set by user is lost during resetting. This patch fixes it by not getting the mac address from NCL_CONFIG when resetting. Fixes: 424eb834a9be ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b2641e2a |
|
03-May-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: Add support of hardware rx-vlan-offload to HNS3 VF driver This patch adds support of hardware rx-vlan-offload to VF driver. VF uses mailbox to convey PF to configure the hardware. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
35f58fd7 |
|
01-May-2018 |
Huazhong Tan <tanhuazhong@huawei.com> |
net: hns3: fix to correctly fetch l4 protocol outer header This patch fixes the function being used to fetch L4 protocol outer header. Mistakenly skb_inner_transport_header API was being used earlier. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c679f6a2 |
|
29-Mar-2018 |
Wei Yongjun <weiyongjun1@huawei.com> |
net: hns3: remove unnecessary pci_set_drvdata() and devm_kfree() There is no need for explicit calls of devm_kfree(), as the allocated memory will be freed during driver's detach. The driver core clears the driver data to NULL after device_release. Thus, it is not needed to manually clear the device driver data to NULL. So remove the unnecessary pci_set_drvdata() and devm_kfree(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3c8f5c03 |
|
23-Mar-2018 |
Fuyun Liang <liangfuyun1@huawei.com> |
net: hns3: fix for the wrong shift problem in hns3_set_txbd_baseinfo Third parameter of hnae_set_field is shift, But a mask is given. This patch fixes it by replacing HNS3_TXD_BDTYPE_M with HNS3_TXD_BDTYPE_S. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6d4c3981 |
|
22-Mar-2018 |
Salil Mehta <salil.mehta@huawei.com> |
net: hns3: Changes to make enet watchdog timeout func common for PF/VF HNS3 drivers enet layer, used for the ring management and stack interaction, is common to both VF and PF. PF already supports reset functionality to handle the network stack watchdog timeout trigger but the existing code is not generic enough to be used to support VF reset as well. This patch does following: 1. Makes the existing watchdog timeout handler in enet layer generic i.e. suitable for both VF and PF and 2. Introduces the new reset event handler for the VF code. 3. Changes existing reset event handler of PF code to initialize the reset level Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a95e1f86 |
|
21-Mar-2018 |
Fuyun Liang <liangfuyun1@huawei.com> |
net: hns3: change the time interval of int_gl calculating Since we change the update rate of int_gl from every interrupt to every one hundred interrupts, the old way to get time interval by int_gl value is not accurate. This patch calculates the time interval using the jiffies value. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cd9d187b |
|
21-Mar-2018 |
Fuyun Liang <liangfuyun1@huawei.com> |
net: hns3: change GL update rate The interrupt coalescing self-adaptive function updates the int_gl every interrupt. The GL update rate is too faster to get a better new GL value. This patch changes the GL update rate to every one hundred interrupts. The GL update rate is defined by HNS3_INT_ADAPT_DOWN_START. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
681ec399 |
|
21-Mar-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix for vlan table lost problem when resetting The vlan table in hardware is clear after PF/Core/IMP/Global reset, which will cause vlan tagged packets not being received problem. This patch fixes it by restoring the vlan table after reset. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f8d291f0 |
|
09-Mar-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: fix rx path skb->truesize reporting bug Original skb->truesize reports the received packet size, not the actual buffer size NIC driver allocated(1 Page). The linux net protocol will misjudge the true size of rx queue. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
20e4bf98 |
|
09-Mar-2018 |
Fuyun Liang <liangfuyun1@huawei.com> |
net: hns3: fix for ipv6 address loss problem after setting channels The function of dev_close and dev_open is just likes ifconfig <netif> down and ifconfig <netif> up. The ipv6 address will be lost after dev_close and dev_open are called. This patch uses hns3_nic_net_stop to replace dev_close and uses hns3_nic_net_open to replace dev_open. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
59098055 |
|
09-Mar-2018 |
Fuyun Liang <liangfuyun1@huawei.com> |
net: hns3: add existence check when remove old uc mac address When driver is in initial state, the mac_vlan table table is empty. So the delete operation for mac address must fail. Existence check is needed here. Otherwise, the error message will make user confused. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7a242b23 |
|
08-Mar-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix for coal configuation lost when setting the channel This patch fixes the coalesce configuation lost problem when setting the channel number by restoring all vectors's coalesce configuation to vector 0's, because all vectors belonging to the same netdev have the same coalesce configuation for now. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9bc727a9 |
|
08-Mar-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: refactor the coalesce related struct This patch refoctors the coalesce related struct by introducing the hns3_enet_coalesce struct, in order to fix the coalesce configuation lost problem when changing the channel number. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
dd38c726 |
|
08-Mar-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix for coalesce configuration lost during reset Coalesce configuration will be set to default value by hns3_nic_init_vector_data during reset, which causes the coalesce configuration loss problem. This patch fixes it by setting the default value in hns3_nic_alloc_vector_data, which will not be called in the reset process. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0d3e6631 |
|
08-Mar-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: refactor the get/put_vector function There is a get_vector function, which allocate the vectors for a client, but there is not a put_vector to free the vector. This patch introduces the put_vector function in order to fix the coalesce configuration lost problem during reset process. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ec777890 |
|
08-Mar-2018 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: hns3: fix for use-after-free when setting ring parameter In hns3_set_ringparam, hns3_uninit_all_ring frees the memory pointed by priv->ring_data[i].ring, and hns3_change_all_ring_bd_num use that pointer without mallocing, which will cause a use-after-free problem. The patch fixes it by not freeing the memory in hns3_uninit_all_ring, and uses hns3_put_ring_config to free it when necessary. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
678335a1 |
|
08-Mar-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: set the max ring num when alloc netdev HNS3 driver should alloc netdev with max support ring num, as driver support change netdev count by ethtool -L. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e1586241 |
|
19-Jan-2018 |
Salil Mehta <salil.mehta@huawei.com> |
net: hns3: converting spaces into tabs to avoid checkpatch.pl warning Spaces were mistakenly used instead of tabs in some of the code related to reset functionality, which caused checkpatch.pl errors. These were missed earlier so fixing them now. Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
bd368416 |
|
12-Jan-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: check for NULL function pointer in hns3_nic_set_features It's necessary to check hook whether being defined before calling, improve the reliability. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
181d454b |
|
12-Jan-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: add feature check when feature changed Local variable "changed" was defined to indicates features changed, but was used only for feature NETIF_F_HW_VLAN_CTAG_RX. Add checking for other features. Fixes: 052ece6dc19c ("net: hns3: add ethtool related offload command") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
11af96a4 |
|
12-Jan-2018 |
Fuyun Liang <liangfuyun1@huawei.com> |
net: hns3: add int_gl_idx setup for TX and RX queues If the int_gl_idx does not be set, the default interrupt coalesce index is 0. The TX queues and the RX queues will both use the GL0 as the interrupt coalesce GL switch. But it should be GL1 for TX queues and GL0 for RX queues. This patch adds the int_gl_idx setup for TX queues and RX queues. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0c8b769b |
|
12-Jan-2018 |
Fuyun Liang <liangfuyun1@huawei.com> |
net: hns3: remove unused GL setup function Since the TX GL and the RX GL need to be set separately, hns3_set_vector_coalesc_gl() has been replaced with hns3_set_vector_coalesce_rx_gl() and hns3_set_vector_coalesce_tx_gl(). This patch removes hns3_set_vector_coalesc_gl(). Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8b1ff1ea |
|
12-Jan-2018 |
Fuyun Liang <liangfuyun1@huawei.com> |
net: hns3: refactor GL update function The GL update function uses the max GL value between tx_int_gl and rx_int_gl to set both new tx_int_gl and new rx_int_gl. Therefore, User can not enable TX GL self-adaptive or RX GL self-adaptive individually. This patch refactors the code to update the TX GL and the RX GL separately, making user can enable TX GL self-adaptive or RX GL self-adaptive individually. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5fd4789a |
|
12-Jan-2018 |
Fuyun Liang <liangfuyun1@huawei.com> |
net: hns3: refactor interrupt coalescing init function In the hardware, the coalesce configurable registers include GL0, GL1, GL2. In the driver, the TX queues use the register GL1 and the RX queues use the register GL0. This function initializes the configuration of the interrupt coalescing, but does not distinguish between the TX direction and the RX direction. It will cause some confusion. This patch refactors the function to initialize the TX GL and the RX GL separately. And the initialization of related variables also is added to this patch. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
434776a5 |
|
12-Jan-2018 |
Fuyun Liang <liangfuyun1@huawei.com> |
net: hns3: add ethtool_ops.set_coalesce support to PF This patch adds ethtool_ops.set_coalesce support to PF. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6c88d9d7 |
|
08-Jan-2018 |
Peng Li <lipeng321@huawei.com> |
net: hns3: report the function type the same line with hns3_nic_get_stats64 The function type should be on the same line with the function name, or it may cause display error if a patch edit the function. There is am example following: https://www.spinics.net/lists/netdev/msg476141.html Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5bad95a1 |
|
05-Jan-2018 |
Fuyun Liang <liangfuyun1@huawei.com> |
net: hns3: fix for changing MTU when changing MTU, The new MTU must need to be set to netdevice. Fixes: a8e8b7ff3517 ("net: hns3: Add support to change MTU in HNS3 hardware") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d2a5dca8 |
|
05-Jan-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Fix an error of total drop packet statistics The dropped tx/rx packets number of each tqp should also be counted into the total drop tx/rx packets numbers. Fixes: 76ad4f0ee74 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b875cc37 |
|
05-Jan-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Mask the packet statistics query when NIC is down Update the HNS3_NIC_STATE_DOWN bit when NIC state changes. When NIC is down, mask the packet statistics for querying with ifconfig command. It's a common practice. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c5f65480 |
|
05-Jan-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Modify the update period of packet statistics It takes more than 200 query response messages between driver and IMP, while updating the packet statistics. It's too heavy for IMP to update it per second. Extend the update period of packet statistics data from 1 second to 300 seconds(if too long, the statistics may overflow). As a result, we need to update it while querying with ifconfig tool to keep the statistics data fresh. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
30ba2ab9 |
|
05-Jan-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Disable VFs change rxvlan offload status Rxvlan offload status can only be changed by PF. Initialize the value of NETIF_F_HW_VLAN_CTAG_RX bit of hw_features for VFS to false, make sure user can't be able to change it. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
391b5e93 |
|
05-Jan-2018 |
Jian Shen <shenjian15@huawei.com> |
net: hns3: Add ethtool interface for vlan filter This patch adds vlan filter enable switch to support ethtool -K ethX rx-vlan-filter on/off. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9699cffe |
|
21-Dec-2017 |
Peng Li <lipeng321@huawei.com> |
net: hns3: add handling vlan tag offload in bd This patch deals with the vlan tag information between sk_buff and rx/tx bd. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
052ece6d |
|
21-Dec-2017 |
Peng Li <lipeng321@huawei.com> |
net: hns3: add ethtool related offload command This patch adds offload command related to "ethtool -K". Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
99fdf6b1 |
|
21-Dec-2017 |
Peng Li <lipeng321@huawei.com> |
net: hns3: free the ring_data structrue when change tqps This patch fixes a memory leak problems in change tqps process, the function hns3_uninit_all_ring and hns3_init_all_ring may be called many times. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Mingguang Qu <qumingguang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
09f2af64 |
|
21-Dec-2017 |
Peng Li <lipeng321@huawei.com> |
net: hns3: add support to modify tqps number This patch adds the support to change tqps number for PF driver by using ehtool -L command. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Mingguang Qu <qumingguang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
424eb834 |
|
14-Dec-2017 |
Salil Mehta <salil.mehta@huawei.com> |
net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC Most of the NAPI handling interface, skb buffer management, management of the RX/TX descriptors, ethool interface etc. has quite a bit of code which is common to VF and PF driver. This patch makes the exisitng PF's HNS3 ENET driver as the common ENET driver for both Virtual & Physical Function. This will help in reduction of redundancy and better management of code. Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: lipeng <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|