can: peak_usb: Reorder include directives alphabetically

The include directives in all source files are reordered alphabetically
according to the names of the header files.

Signed-off-by: Lukas Magel <lukas.magel@posteo.net>
Link: https://lore.kernel.org/all/20230116200932.157769-9-lukas.magel@posteo.net
[mkl: move header changes from Patch 3 here]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: peak_usb: add ethtool interface to user-configurable CAN channel identifier

This patch introduces 3 new functions implementing support for ethtool
access to the CAN channel ID of all USB CAN network interfaces managed by
the driver. With this patch, it is possible to read/write the CAN
channel ID from/to the EEPROM via the ethtool interface.

The CAN channel ID is a user-configurable device identifier that can be
set individually for each CAN interface of a PEAK USB device. Depending on
the device, the identifier has a length of 8 or 32 bit. The identifier
is stored in the non-volatile memory of the device.

The identifier of a CAN interface can be read/written as an 8 or 32 bit
byte string in native (little-endian) byte order, where the length depends
on the device type.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Lukas Magel <lukas.magel@posteo.net>
Link: https://lore.kernel.org/all/20230116200932.157769-6-lukas.magel@posteo.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: peak_usb: allow flashing of the CAN channel ID

This patch adds callbacks that allow the user to set a new self-defined
CAN channel ID to all USB - CAN/CANFD interfaces of PEAK-System managed by
this driver, namely:
- PCAN-USB
- PCAN-USB FD
- PCAN-USB Pro FD
- PCAN-USB X6
- PCAN-Chip USB
- PCAN-USB Pro

The callback functions write the CAN channel ID to the non-volatile
memory of the devices.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Lukas Magel <lukas.magel@posteo.net>
Link: https://lore.kernel.org/all/20230116200932.157769-4-lukas.magel@posteo.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: peak_usb: rename device_id to CAN channel ID

The so-called "device id" is a user-defined identifier value that can be
set individually for each CAN interface of a PEAK USB device.
Contrary to a static serial number, the value can be changed by the
user. With this ID, each CAN interface can be uniquely identified even if
the USB device does not export a proper serial number or the USB device
exports multiple CAN interfaces. In order to not confuse it with the
device ID used by the USB core and emphasize the link to the CAN
interface, the functions and variables for reading this user-defined
value are renamed to CAN channel ID.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Lukas Magel <lukas.magel@posteo.net>
Link: https://lore.kernel.org/all/20230116200932.157769-2-lukas.magel@posteo.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: peak_usb: advertise timestamping capabilities and add ioctl support

Currently, userland has no method to query which timestamping features
are supported by the peak_usb driver (aside maybe of getting RX
messages and observe whether or not hardware timestamps stay at zero).

The canonical way to add hardware timestamp support is to implement
ethtool_ops::get_ts_info() in order to advertise the timestamping
capabilities and to implement net_device_ops::ndo_eth_ioctl() as
requested in [1]. Currently, the driver only supports hardware RX
timestamps [2] but not hardware TX. For this reason, the generic
function can_ethtool_op_get_ts_info_hwts() and can_eth_ioctl_hwts()
can not be reused and instead this patch adds pcan_get_ts_info() and
peak_eth_ioctl().

[1] kernel doc Timestamping, section 3.1: "Hardware Timestamping
Implementation: Device Drivers"
Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers

[2] https://lore.kernel.org/linux-can/20220727080634.l6uttnbrmwbabh3o@pengutronix.de/

CC: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-15-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: peak_usb: correction of an initially misnamed field name

The data structure returned from the USB device contains a number
flashed by the user and not the serial number of the device.

Link: https://lore.kernel.org/all/20220719120632.26774-2-s.grosjean@peak-system.com
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: do not increase rx_bytes statistics for RTR frames

The actual payload length of the CAN Remote Transmission Request (RTR)
frames is always 0, i.e. no payload is transmitted on the wire.
However, those RTR frames still use the DLC to indicate the length of
the requested frame.

As such, net_device_stats::rx_bytes should not be increased for the
RTR frames.

This patch fixes all the CAN drivers.

Link: https://lore.kernel.org/all/20211207121531.42941-5-mailhol.vincent@wanadoo.fr
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Yasushi SHOJI <yashi@spacecubics.com>
Cc: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
Cc: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Stephane Grosjean <s.grosjean@peak-system.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: do not increase rx statistics when generating a CAN rx error message frame

The CAN error message frames (i.e. error skb) are an interface
specific to socket CAN. The payload of the CAN error message frames
does not correspond to any actual data sent on the wire. Only an error
flag and a delimiter are transmitted when an error occurs (c.f. ISO
11898-1 section 10.4.4.2 "Error flag").

For this reason, it makes no sense to increment the rx_packets and
rx_bytes fields of struct net_device_stats because no actual payload
were transmitted on the wire.

This patch fixes all the CAN drivers.

Link: https://lore.kernel.org/all/20211207121531.42941-2-mailhol.vincent@wanadoo.fr
CC: Marc Kleine-Budde <mkl@pengutronix.de>
CC: Nicolas Ferre <nicolas.ferre@microchip.com>
CC: Alexandre Belloni <alexandre.belloni@bootlin.com>
CC: Ludovic Desroches <ludovic.desroches@microchip.com>
CC: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
CC: Maxime Ripard <mripard@kernel.org>
CC: Chen-Yu Tsai <wens@csie.org>
CC: Jernej Skrabec <jernej.skrabec@gmail.com>
CC: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
CC: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
CC: Michal Simek <michal.simek@xilinx.com>
CC: Stephane Grosjean <s.grosjean@peak-system.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: peak_usb: pcan_usb_{,pro}_get_device_id(): remove unneeded check for device_id

The callback struct peak_usb_adapter::dev_get_device_id, which is
implemented by the functions pcan_usb_{,pro}_get_device_id() is only
ever called with a valid device_id pointer.

This patch removes the unneeded check if the device_id pointer is
valid.

Link: https://lore.kernel.org/r/20210406111622.1874957-7-mkl@pengutronix.de
Acked-by: Stephane Grosjean <s.grosjean@peak-system.com>
Tested-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: peak_usb: remove write only variable struct peak_usb_adapter::ts_period

The variable struct peak_usb_adapter::ts_period is only ever written
to. This patch removes it from the driver.

Link: https://lore.kernel.org/r/20210406111622.1874957-5-mkl@pengutronix.de
Acked-by: Stephane Grosjean <s.grosjean@peak-system.com>
Tested-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: peak_usb: fix checkpatch warnings

This patch cleans several checkpatch warnings in the peak_usb driver.

Link: https://lore.kernel.org/r/20210406111622.1874957-2-mkl@pengutronix.de
Acked-by: Stephane Grosjean <s.grosjean@peak-system.com>
Tested-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: peak_usb: add support of ONE_SHOT mode

This patch adds "ONE-SHOT" mode support to the following CAN-USB
PEAK-System GmbH interfaces:
- PCAN-USB X6
- PCAN-USB FD
- PCAN-USB Pro FD
- PCAN-Chip USB
- PCAN-USB Pro

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
[mkl: split into two patches]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: peak_usb: add support of ethtool set_phys_id()

This patch makes it possible to specifically flash the LED of a CAN
port of the CAN-USB interfaces of PEAK-System.

Link: https://lore.kernel.org/r/20210309122141.3276927-1-mkl@pengutronix.de
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
[mkl: use common prefix PCAN_ for defines]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: peak_usb: pcan_usb_pro_encode_msg(): use macros for flags instead of plain integers

This patch replaces the plain integers used for flags in
pcan_usb_pro_encode_msg() by macros which are already defined.

Link: https://lore.kernel.org/r/20210309082128.23125-4-s.grosjean@peak-system.com
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
[mkl: split into two patches]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

module: remove never implemented MODULE_SUPPORTED_DEVICE

MODULE_SUPPORTED_DEVICE was added in pre-git era and never was
implemented. We can safely remove it, because the kernel has grown
to have many more reliable mechanisms to determine if device is
supported or not.

Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

can: replace can_dlc as variable/element for payload length

The naming of can_dlc as element of struct can_frame and also as variable
name is misleading as it claims to be a 'data length CODE' but in reality
it always was a plain data length.

With the indroduction of a new 'len' element in struct can_frame we can now
remove can_dlc as name and make clear which of the former uses was a plain
length (-> 'len') or a data length code (-> 'dlc') value.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20201120100444.3199-1-socketcan@hartkopp.net
[mkl: gs_usb: keep struct gs_host_frame::can_dlc as is]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: peak_usb: convert to use le32_add_cpu()

Convert cpu_to_le32(le32_to_cpu(E1) + E2) to use le32_add_cpu().

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20200914041744.3701840-1-liushixin2@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: drivers: fix spelling mistakes

This patch fixes spelling erros found by "codespell" in the
drivers/net/can subtree.

Link: https://lore.kernel.org/r/20200915223527.1417033-6-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

treewide: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

can: peak_usb: pcan_usb_pro: Fix info-leaks to USB devices

Uninitialized Kernel memory can leak to USB devices.

Fix by using kzalloc() instead of kmalloc() on the affected buffers.

Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+d6a5a1a3657b596ef132@syzkaller.appspotmail.com
Fixes: f14e22435a27 ("net: can: peak_usb: Do not do dma on the stack")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 285

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license this program
is distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 100 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.918357685@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

peak_usb: fix clang build warning

Clang points out undefined behavior when building the pcan_usb_pro driver:

drivers/net/can/usb/peak_usb/pcan_usb_pro.c:136:15: error: passing an object that undergoes default argument promotion to 'va_start' has undefined behavior [-Werror,-Wvarargs]

Changing the function prototype to avoid argument promotion in the
varargs call avoids the warning, and should make this well-defined.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

can: peak_usb: mark expected switch fall-throughs

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: peak_usb: remove some 'struct timeval' users

We want to remove 'struct timeval' and related interfaces since this is
generally not safe for use beyond 2038.

For peak_usb, we can simplify the internal interface by using ktime_t
directly. This should not change any behavior, but it avoids a few
conversions.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: pcan_usb: don't provide CAN FD bittimings by non-FD adapters

The CAN FD data bittiming constants are provided via netlink only when there
are valid CAN FD constants available in priv->data_bittiming_const.

Due to the indirection of pointer assignments in the peak_usb driver the
priv->data_bittiming_const never becomes NULL - not even for non-FD adapters.

The data_bittiming_const points to zero'ed data which leads to this result
when running 'ip -details link show can0':

35: can0: <NOARP,ECHO> mtu 16 qdisc noop state DOWN mode DEFAULT group default qlen 10
link/can promiscuity 0
can state STOPPED restart-ms 0
pcan_usb: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1
: dtseg1 0..0 dtseg2 0..0 dsjw 1..0 dbrp 0..0 dbrp-inc 0 <== BROKEN!
clock 8000000

This patch changes the struct peak_usb_adapter::bittiming_const and struct
peak_usb_adapter::data_bittiming_const to pointers to fix the assignemnt
problems.

Cc: linux-stable <stable@vger.kernel.org> # >= 4.0
Reported-by: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: pcan_usb: don't touch skb after netif_rx()

There is no guarantee that the skb is in the same state after calling
net_receive_skb() or netif_rx(). It might be freed or reused. Not really
harmful as its a read access, except you turn on the proper debugging options
which catch a use after free.

Cc: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: peak_usb: export pcan_usb_pro functions

Add support for the following new PEAK-System technik CANFD USB adapters:

PCAN-USB FD single CANFD channel USB adapter
PCAN-USB Pro FD dual CANFD channels USB adapter

The communication protocol has been developed using some mechanisms that
did exist in the PCAN-USB Pro, thus, this patch also changes some
previously static functions and data into global ones.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: peak_usb: export ctrlmode_supported to adapter specific definition

Export the ctrlmode_supported value from the core file to each adapter specific
file. This has been mandatory for supporting the new CANFD extension.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: peak_usb: constify struct peak_usb_adapter

A "struct peak_usb_adapter" describes a certain USB adapter, as this doesn't
change during runtime, this patch marks all USB adapter definitions as const.

Acked-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: move can_stats.bus_off++ from can_bus_off into can_change_state

In order to be able to move the stats increment from can_bus_off() into
can_change_state(), the increment had to be moved back into code that was using
can_bus_off() but not can_change_state().

As a side-effect, this patch fixes the following bugs:
* Redundant call to can_bus_off() in c_can.
* Bus-off counted twice in xilinx_can.

Signed-off-by: Andri Yngvason <andri.yngvason@marel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: peak_usb: fix multi-byte values endianess

This patch fixes the endianess definition as well as the usage of the
multi-byte fields in the data structures exchanged with the PEAK-System USB
adapters.

By fixing the endianess, this patch also fixes the wrong usage of a 32-bits
local variable for handling the error status 16-bits field, in function
pcan_usb_pro_handle_error().

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: peak_usb: fix memset() usage

This patchs fixes a misplaced call to memset() that fills the request
buffer with 0. The problem was with sending PCAN_USBPRO_REQ_FCT
requests, the content set by the caller was thus lost.

With this patch, the memory area is zeroed only when requesting info
from the device.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: peak_usb: fix mem leak in pcan_usb_pro_init()

This patch fixes a memory leak in pcan_usb_pro_init(). In patch

f14e224 net: can: peak_usb: Do not do dma on the stack

the struct pcan_usb_pro_fwinfo *fi and struct pcan_usb_pro_blinfo *bi were
converted from stack to dynamic allocation va kmalloc(). However the
corresponding kfree() was not introduced.

This patch adds the missing kfree().

Cc: linux-stable <stable@vger.kernel.org> # v3.10
Reported-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

net: can: peak_usb: Do not do dma on the stack

smatch reports the following warnings:
drivers/net/can/usb/peak_usb/pcan_usb_pro.c:514 pcan_usb_pro_drv_loaded() error: doing dma on the stack (buffer)
drivers/net/can/usb/peak_usb/pcan_usb_pro.c:878 pcan_usb_pro_init() error: doing dma on the stack (&fi)
drivers/net/can/usb/peak_usb/pcan_usb_pro.c:889 pcan_usb_pro_init() error: doing dma on the stack (&bi)

See "Documentation/DMA-API-HOWTO.txt" section "What memory is DMA'able?"

Cc: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: peak_usb: fix hwtstamp assignment

The skb->tstamp is set to the hardware timestamp when available in the USB
urb message. This leads to user visible timestamps which contain the 'uptime'
of the USB adapter - and not the usual system generated timestamp.

Fix this wrong assignment by applying the available hardware timestamp to the
skb_shared_hwtstamps data structure - which is intended for this purpose.

Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: usb: peak: rename peak_usb dump_mem function

Rename generic-sounding function dump_mem() to pcan_dump_mem()
so that it does not conflict with the dump_mem() function in
arch/sh/include/asm/kdebug.h.

drivers/net/can/usb/peak_usb/pcan_usb_core.c: error: conflicting types for 'dump_mem': => 56:6
drivers/net/can/usb/peak_usb/pcan_usb_core.h: error: conflicting types for 'dump_mem': => 134:6

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Stephane Grosjean <s.grosjean@peak-system.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
[mkl: convert all users of dump_mem(), too]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: usb: PCAN-USB Pro: fix mem leaks in pcan_usb_pro_init() on error paths

If either call to pcan_usb_pro_send_req() in
drivers/net/can/usb/peak_usb/pcan_usb_pro.c::pcan_usb_pro_init()
fails, we'll leak the memory we allocated to 'usb_if' with kzalloc()
when the 'usb_if' variable goes out of scope without having been
assigned to anything as we 'return err;'.
Fix this by adding appropriate kfree(usb_if) calls to the error paths.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: usb: PEAK-System Technik PCAN-USB Pro specific part

This patch adds the specific part which handles the PCAN-USB Pro adapter
from PEAK-System Technik (http://www.peak-system.com). The PCAN-USB Pro
adapter is a dual-channel USB 2.0 adapter compliant with CAN specifications

Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>