mfd: rsmu_i2c: Convert to use maple tree register cache

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.

Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20240206071314.8721-15-liubo03@inspur.com
Signed-off-by: Lee Jones <lee@kernel.org>

mfd: rsmu_i2c: Remove redundant of_match_ptr()

The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr() here. We remove of_match_ptr() here.

Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Link: https://lore.kernel.org/r/20230808130023.202700-2-wangzhu9@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>

mfd: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230515182752.10050-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Lee Jones <lee@kernel.org>

mfd: rsmu_i2c: Convert to i2c's .probe_new() again

This commit reapplies commit 601e6d48ee35 ("mfd: rsmu_i2c: Convert to
i2c's .probe_new()") which was accidently reverted by commit
1b3b1d6c27cc ("mfd: rsmu: Support 32-bit address space").

Without this change the driver fails to build in combination with commit
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") which
is contained in v6.3-rc2.

Fixes: 1b3b1d6c27cc ("mfd: rsmu: Support 32-bit address space")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230331070344.czphnnmvu2ojzo5l@pengutronix.de

mfd: rsmu: Support 32-bit address space

We used to assume 0x2010xxxx address. Now that we need to access
0x2011xxxx address, we need to support read/write the whole 32-bit
address space.

Also defined RSMU_MAX_WRITE_COUNT and RSMU_MAX_READ_COUNT for readability

Signed-off-by: Min Li <min.li.xe@renesas.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/MW5PR03MB693295AF31ABCAF6AE52EE74A08B9@MW5PR03MB6932.namprd03.prod.outlook.com

mfd: rsmu_i2c: Convert to i2c's .probe_new()

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-456-uwe@kleine-koenig.org

i2c: Make remove callback return void

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

mfd: Add Renesas Synchronization Management Unit (SMU) support

Add support for ClockMatrix(TM) and 82P33xxx families of timing
and synchronization devices. The access interface can be either
SPI or I2C. Currently, it will create 2 types of MFD devices,
which are to be used by the corresponding rsmu character device
driver and the PTP hardware clock driver, respectively.

Signed-off-by: Min Li <min.li.xe@renesas.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>