mfd: rn5t618: Convert to use maple tree register cache

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.

Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20240206071314.8721-14-liubo03@inspur.com
Signed-off-by: Lee Jones <lee@kernel.org>

mfd: Use i2c_get_match_data() in a selection of drivers

Use preferred i2c_get_match_data() instead of of_match_device() and
i2c driver_data to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20231017203603.2700864-1-robh@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>

mfd: rn5t618: Remove redundant of_match_ptr()

The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr() here. We remove of_match_ptr() here.

Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Link: https://lore.kernel.org/r/20230808130023.202700-9-wangzhu9@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>

mfd: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230515182752.10050-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Lee Jones <lee@kernel.org>

mfd: rn5t618: Replace irqchip mask_invert with unmask_base

Remove use of the deprecated mask_invert flag. Inverted mask
registers (where a '1' bit enables an IRQ) can be described more
directly as an unmask register.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221112151835.39059-10-aidanmacdonald.0x0@gmail.com

i2c: Make remove callback return void

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

mfd: rn5t618: Fix IRQ trigger by changing it to level mode

During more massive generation of interrupts, the IRQ got stuck,
and the subdevices did not see any new interrupts. That happens
especially at wonky USB supply in combination with ADC reads.
To fix that trigger the IRQ at level low instead of falling edge.

Fixes: 0c81604516af ("mfd: rn5t618: Add IRQ support")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: rn5t618: Do not cache various USB related registers

These register get reset to their OTP defaults after USB plugging.
And while at it, also add a missing register for detecting the
charger type.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: rn5t618: Add a power supply subdevice

The RN5T618 and RC5T619 both have a charger and a fuel gauge, so add
a subdevice for it. According to drivers in the wild, things
should be at least similar, but since it is not tested, add it
only to the RC5T619.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: rn5t618: Fix caching of battery related registers

Battery status changes dynamically, so the corresponding registers
need to be considered volatile. Affected registers are:

- fuel gauge
- battery status
- battery interrupt

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: rn5t618: Make restart handler atomic safe

The restart handler is executed during the shutdown phase which is
atomic/irq-less. The i2c framework supports atomic transfers since
commit 63b96983a5dd ("i2c: core: introduce callbacks for atomic
transfers") to address this use case. Using i2c regmap in that
situation is not allowed:

[ 165.177465] [ BUG: Invalid wait context ]
[ 165.181479] 5.8.0-rc3-00003-g0e9088558027-dirty #11 Not tainted
[ 165.187400] -----------------------------
[ 165.191410] systemd-shutdow/1 is trying to lock:
[ 165.196030] d85b4438 (rn5t618:170:(&rn5t618_regmap_config)->lock){+.+.}-{3:3}, at: regmap_update_bits_base+0x30/0x70
[ 165.206573] other info that might help us debug this:
[ 165.211625] context-{4:4}
[ 165.214248] 2 locks held by systemd-shutdow/1:
[ 165.218691] #0: c131c47c (system_transition_mutex){+.+.}-{3:3}, at: __do_sys_reboot+0x90/0x204
[ 165.227405] #1: c131efb4 (rcu_read_lock){....}-{1:2}, at: __atomic_notifier_call_chain+0x0/0x118
[ 165.236288] stack backtrace:
[ 165.239174] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.8.0-rc3-00003-g0e9088558027-dirty #11
[ 165.248220] Hardware name: Freescale i.MX6 SoloLite (Device Tree)
[ 165.254330] [<c0112110>] (unwind_backtrace) from [<c010bfa0>] (show_stack+0x10/0x14)
[ 165.262084] [<c010bfa0>] (show_stack) from [<c058093c>] (dump_stack+0xe8/0x120)
[ 165.269407] [<c058093c>] (dump_stack) from [<c01835a4>] (__lock_acquire+0x81c/0x2ca0)
[ 165.277246] [<c01835a4>] (__lock_acquire) from [<c0186344>] (lock_acquire+0xe4/0x490)
[ 165.285090] [<c0186344>] (lock_acquire) from [<c0c98638>] (__mutex_lock+0x74/0x954)
[ 165.292756] [<c0c98638>] (__mutex_lock) from [<c0c98f34>] (mutex_lock_nested+0x1c/0x24)
[ 165.300769] [<c0c98f34>] (mutex_lock_nested) from [<c07593ec>] (regmap_update_bits_base+0x30/0x70)
[ 165.309741] [<c07593ec>] (regmap_update_bits_base) from [<c076b838>] (rn5t618_trigger_poweroff_sequence+0x34/0x64)
[ 165.320097] [<c076b838>] (rn5t618_trigger_poweroff_sequence) from [<c076b874>] (rn5t618_restart+0xc/0x2c)
[ 165.329669] [<c076b874>] (rn5t618_restart) from [<c01514f8>] (notifier_call_chain+0x48/0x80)
[ 165.338113] [<c01514f8>] (notifier_call_chain) from [<c01516a8>] (__atomic_notifier_call_chain+0x70/0x118)
[ 165.347770] [<c01516a8>] (__atomic_notifier_call_chain) from [<c0151768>] (atomic_notifier_call_chain+0x18/0x20)
[ 165.357949] [<c0151768>] (atomic_notifier_call_chain) from [<c010a828>] (machine_restart+0x68/0x80)
[ 165.367001] [<c010a828>] (machine_restart) from [<c0153224>] (__do_sys_reboot+0x11c/0x204)
[ 165.375272] [<c0153224>] (__do_sys_reboot) from [<c0100080>] (ret_fast_syscall+0x0/0x28)
[ 165.383364] Exception stack(0xd80a5fa8 to 0xd80a5ff0)
[ 165.388420] 5fa0: 00406948 00000000 fee1dead 28121969 01234567 73299b00
[ 165.396602] 5fc0: 00406948 00000000 00000000 00000058 be91abc8 00000000 be91ab60 004056f8
[ 165.404781] 5fe0: 00000058 be91aabc b6ed4d45 b6e56746

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: rn5t618: Cleanup i2c_device_id

That list was just empty, so it can be removed if .probe_new
instead of .probe is used

Suggested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: rn5t618: Add more subdevices

Since the RC5T619 has a RTC, use a separate subdevice list for that.
The ADC should be the same as in the RN5T618, according to drivers
in the wild, but since it is not tested, the ADC is only added for
the RC5T619.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: rn5t618: Add RTC related registers

Defines for some RTC related registers were missing, also
they were not included in the volatile register list

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: rn5t618: Add IRQ support

This adds support for IRQ handling in the RC5T619 which is required
for properly implementing subdevices like RTC.
For now only definitions for the variant RC5T619 are included.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: rn5t618: Mark ADC control register volatile

There is a bit which gets cleared after conversion.

Fixes: 9bb9e29c78f8 ("mfd: Add Ricoh RN5T618 PMIC core driver")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation you should have received a
copy of the gnu general public license along with this program if
not see http www gnu org licenses

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 30 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.962665879@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: rn5t618: Unregister restart handler on remove

Remove the restart handler registered in probe on device remove.

Fixes: a370f60a58ec ("mfd: rn5t618: Register restart handler")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: rn5t618: Add Ricoh RC5T619 PMIC support

The Ricoh RN5T567 is from the same family as the Ricoh RN5T618 is,
the differences are:

+ DCDC4/DCDC5
+ LDO7-10
+ Slightly different output voltage/currents
+ 32kHz Output
+ RTC
+ USB Charger detection

Signed-off-by: Pierre-Hugues Husson <phh@phh.me>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: rn5t618: Register restart handler

Use the PMIC's repower capability for reboots. Register a restart
handler and use a slightly elevated priority of 192 since the PMIC
has suprior reset capability (causing a system wide reset).

Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: rn5t618: Register power off callback optionally

Only register power off if the PMIC is defined as system power
controller (see Documentation/devicetree/bindings/power/
power-controller.txt).

Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: rn5t618: Add Ricoh RN5T567 PMIC support

The Ricoh RN5T567 is from the same family as the Ricoh RN5T618 is,
the differences are:

+ DCDC4
+ Slightly different output voltage/currents
+ 32kHz Output
- ADC/Charger capabilities

Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: rn5t618: Use devm_mfd_add_devices() for mfd_device registration

Use devm_mfd_add_devices() for MFD devices registration and remove
the call of mfd_remove_devices() from .remove callback to remove
MFD child-devices. This is done by managed device framework.

CC: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: Add Ricoh RN5T618 PMIC core driver

Ricoh RN5T618 is a power management IC which integrates 3 step-down
DCDC converters, 7 low-dropout regulators, a Li-ion battery charger,
fuel gauge, ADC, GPIOs and a watchdog timer.

This commit adds a MFD core driver to support the I2C communication
with the device.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>