mfd: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230515182752.10050-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Lee Jones <lee@kernel.org>

mfd: intel_soc_pmic_chtwc: Add Lenovo Yoga Book X90F to intel_cht_wc_models

The Android Lenovo Yoga Book X90F / X90L uses the same charger / fuelgauge
setup as the already supported Windows Lenovo Yoga Book X91F/L, add
a DMI match for this to intel_cht_wc_models with driver_data
set to INTEL_CHT_WC_LENOVO_YOGABOOK1.

When the quirk for the X91F/L was initially added it was written to
also apply to the X90F/L but this does not work because the Android
version of the Yoga Book uses completely different DMI strings.
Also adjust the X91F/L quirk to reflect that it only applies to
the X91F/L models.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230301095402.28582-1-hdegoede@redhat.com

mfd: intel_soc_pmic_chtwc: Add Lenovo Yoga Tab 3 X90F to intel_cht_wc_models

The drivers for various CHT Whiskey Cove PMIC child-devices need to know
the model, since they have model specific behavior. The DMI match table
for this is shared between the child-device-drivers inside the MFD driver.

Add the Lenovo Yoga Tab 3 X90F, which is a previously unknown tablet
model with a CHT Whiskey Cove PMIC, to the intel_cht_wc_models enum and
to the DMI match table.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230126153823.22146-2-hdegoede@redhat.com

mfd: intel_soc_pmic_chtwc: Switch from __maybe_unused to pm_sleep_ptr() etc

Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less heavier for builds
than the use of __maybe_unused attributes.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220616171009.43524-2-andriy.shevchenko@linux.intel.com

mfd: intel_soc_pmic_chtwc: Use dev_err_probe()

Simplify the mux error path a bit by using dev_err_probe().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220616171009.43524-1-andriy.shevchenko@linux.intel.com

mfd: intel_soc_pmic_chtwc: Add cht_wc_model data to struct intel_soc_pmic

Tablet / laptop designs using an Intel Cherry Trail x86 main SoC with
an Intel Whiskey Cove PMIC do not use a single standard setup for
the charger, fuel-gauge and other chips surrounding the PMIC /
charging+data USB port.

Unlike what is normal on x86 this diversity in designs is not handled
by the ACPI tables. On 2 of the 3 known designs there are no standard
(PNP0C0A) ACPI battery devices and on the 3th design the ACPI battery
device does not work under Linux due to it requiring non-standard
and undocumented ACPI behavior.

So to make things work under Linux we use native charger and fuel-gauge
drivers on these devices, re-using the native drivers used on ARM boards
with the same charger / fuel-gauge ICs.

This requires various MFD-cell drivers for the CHT-WC PMIC cells to
know which model they are exactly running on so that they can e.g.
instantiate an I2C-client for the right model charger-IC (the charger
is connected to an I2C-controller which is part of the PMIC).

Rather then duplicating DMI-id matching to check which model we are
running on in each MFD-cell driver, add a check for this to the
shared drivers/mfd/intel_soc_pmic_chtwc.c code by using a
DMI table for all 3 known models:

1. The GPD Win and GPD Pocket mini-laptops, these are really 2 models
but the Pocket re-uses the GPD Win's design in a different housing:

The WC PMIC is connected to a TI BQ24292i charger, paired with
a Maxim MAX17047 fuelgauge + a FUSB302 USB Type-C Controller +
a PI3USB30532 USB switch, for a fully functional Type-C port.

2. The Xiaomi Mi Pad 2:

The WC PMIC is connected to a TI BQ25890 charger, paired with
a TI BQ27520 fuelgauge, using the TI BQ25890 for BC1.2 charger type
detection, for a USB-2 only Type-C port without PD.

3. The Lenovo Yoga Book YB1-X90 / Lenovo Yoga Book YB1-X91 series:

The WC PMIC is connected to a TI BQ25892 charger, paired with
a TI BQ27542 fuelgauge, using the WC PMIC for BC1.2 charger type
detection and using the BQ25892's Mediatek Pump Express+ (1.0)
support to enable charging with up to 12V through a micro-USB port.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

mfd: intel: Constify static struct resource

Constify a number of static struct resource. The only usage of the
structs are to assign their address to the resources field in the
mfd_cell struct. This allows the compiler to put them in read-only
memory. Done with the help of Coccinelle.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: intel_soc_pmic_chtwc: Register LED child device

Add MFD cell for LEDs driver to the Intel Cherry Trail Whiskey Cove PMIC
mfd device driver.

Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: Convert Intel PMIC drivers to use SPDX identifier
1;5201;0c
Reduce size of duplicated comments by switching to use SPDX identifier.

No functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

mfd: Add Cherry Trail Whiskey Cove PMIC driver

Add mfd driver for Intel CHT Whiskey Cove PMIC, based on various non
upstreamed CHT Whiskey Cove PMIC patches.

This is a somewhat minimal version which adds irqchip support and cells
for: ACPI PMIC opregion support, the i2c-controller driving the external
charger irc and the pwrsrc/extcon block.

Further cells can be added in the future if/when drivers are upstreamed
for them.

[The above patch caused a build error on some archetectures]

From: Arnd Bergmann <arnd@arndb.de>

I ran into a build error on ARM with a platform that has a non-standard
clk implementation:

drivers/clk/clk.o: In function `clk_disable':
clk.c:(.text.clk_disable+0x0): multiple definition of `clk_disable'
arch/arm/mach-omap1/clock.o:clock.c:(.text.clk_disable+0x0): first defined here
drivers/clk/clk.o: In function `clk_enable':
clk.c:(.text.clk_enable+0x0): multiple definition of `clk_enable'
arch/arm/mach-omap1/clock.o:clock.c:(.text.clk_enable+0x0): first defined here

The problem is a device driver that uses 'select COMMON_CLK', which is
generally a bad idea: selecting a subsystem should only be done from
a platform, otherwise we run into circular dependencies. The same driver
also selects 'GPIOLIB' and 'I2C', which has a similar effect.

This turns all three into 'depends on', as it should be.

Finally, we can limit the build to x86, unless we are compile testing.

First patch:
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Fix for first patch (squashed):
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>