media: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: vidtv: Convert to i2c's .probe_new()

The probe functions doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

i2c: Make remove callback return void

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

media: vidtv: reorganize includes

- Place the includes on alphabetical order;
- get rid of asm/byteorder.h;
- add bug.h at vidtv_s302m.c, as it is needed by
inux/fixp-arith.h

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: vidtv: add basic support for DVBv5 stats

The current stats code is broken on so many ways. It ends
reporting 0 for signal strengh, and the work queue doesn't
run. If it would run, the code would crash.

Fix such issues and add the minimum stuff for DVBv5 stats.

Right now, only strength and cnr and UCB are implemented.
pre/post BER stats will always return zero.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: vidtv: fix frequency tuning logic

Right now, there are some issues at the tuning logic:

1) the config struct is not copied at the tuner driver.
so, it won't use any frequency table at all;
2) the code that checks for frequency shifts is called
at set_params. So, lock_status will never be zeroed;
3) the signal strength will also report a strong
signal, even if not tuned;
4) the logic is not excluding non-set frequencies.

Fix those issues.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: vidtv: prefer using dev_foo() instead of pr_foo()

It is better to use the higher level dev_foo() than pr_foo()
for printks.

Change them at vidtv at the more trivial places.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: vidtv: fix driver unbind/remove

The current remove logic is broken and causes an OOPS.

Fix it.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: vidtv: implement a tuner driver

The virtual DVB test driver serves as a reference DVB driver and helps
validate the existing APIs in the media subsystem. It can also aid
developers working on userspace applications.

This dummy tuner should support common TV standards such as DVB-T/T2/S/S2,
ISDB-T and ATSC when completed.

Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>