media: verisilicon: Refactor postprocessor to store more buffers

Since vb2 queue can store more than VB2_MAX_FRAME buffers, the
postprocessor buffer storage must be capable to store more buffers too.
Change static dec_q array to allocated array to be capable to store
up to queue 'max_num_buffers'.
Keep allocating queue 'num_buffers' at queue setup time but also allows
to allocate postprocessors buffers on the fly.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
CC: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: verisilicon: Stop direct calls to queue num_buffers field

Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: verisilicon: Do not enable G2 postproc downscale if source is narrower than destination

In case of encoded input VP9 data width that is not multiple of macroblock
size, which is 16 (e.g. 1080x1920 frames, where 1080 is multiple of 8), the
width is padded to be a multiple of macroblock size (for 1080x1920 frames,
that is 1088x1920).

The hantro_postproc_g2_enable() checks whether the encoded data width is
equal to decoded frame width, and if not, enables down-scale mode. For a
frame where input is 1080x1920 and output is 1088x1920, this is incorrect
as no down-scale happens, the frame is only padded. Enabling the down-scale
mode in this case results in corrupted frames.

Fix this by adjusting the check to test whether encoded data width is
greater than decoded frame width, and only in that case enable the
down-scale mode.

To generate input test data to trigger this bug, use e.g.:
$ gst-launch-1.0 videotestsrc ! video/x-raw,width=272,height=256,format=I420 ! \
vp9enc ! matroskamux ! filesink location=/tmp/test.vp9
To trigger the bug upon decoding (note that the NV12 must be forced, as
that assures the output data would pass the G2 postproc):
$ gst-launch-1.0 filesrc location=/tmp/test.vp9 ! matroskademux ! vp9parse ! \
v4l2slvp9dec ! video/x-raw,format=NV12 ! videoconvert ! fbdevsink

Fixes: 79c987de8b35 ("media: hantro: Use post processor scaling capacities")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: verisilicon: change confusingly named relaxed register access

The register abstraction has wrappers around both the normal writel()
and its writel_relaxed() counterpart, but this has led to a lot of users
ending up with the relaxed version.

There is sometimes a need to intentionally pick the relaxed accessor for
performance critical functions, but I noticed that each hantro_reg_write()
call also contains a non-relaxed readl(), which is typically much more
expensive than a writel, so there is little benefit here but an added
risk of missing a serialization against DMA.

To make this behave like other interfaces, use the normal accessor by
default and only provide the relaxed version as an alternative for
performance critical code. hantro_postproc.c is the only place that
used both the relaxed and normal writel, but this does not seem
cricital either, so change it all to the normal ones.

[hverkuil: fix function prototype alignment]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: verisilicon: Conditionally ignore native formats

AV1 film grain feature requires to use the postprocessor to produce
valid frames. In such case the driver shouldn't propose native pixels
format but only post-processed pixels format.
Additionally if when setting a control a value could change capture
queue pixels formats it is needed to call hantro_reset_raw_fmt().

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: verisilicon: Compute motion vectors size for AV1 frames

Compute the additional space required to store motion vectors at
the end of the frames buffers.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: verisilicon: Do not change context bit depth before validating the format

It is needed to check if the proposed pixels format is valid before
updating context bit depth and other internal states.
Stop using ctx->bit_depth to check format depth match and return
result to the caller.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: hantro: postproc: Configure output regs to support 10bit

Move output format setting in postproc and make sure that
8/10bit configuration is correctly set.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: destage Hantro VPU driver

The Hantro mainline driver has been used in production
since several years and was only kept as a staging driver
due the stateless CODEC controls.

Now that all the stateless CODEC controls have been moved
out of staging, graduate the driver as well.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>