media: ipu-bridge: Fix Kconfig dependencies

The current Kconfig symbol dependencies allow having the following Kconfig
symbol values

CONFIG_IPU_BRIDGE=m
CONFIG_VIDEO_IPU3_CIO2=y
CONFIG_CIO2_BRIDGE=n

This does not work as the IPU bridge API is conditional to
IS_ENABLED(CONFIG_IPU_BRIDGE). Fix this by changing the dependencies so
that CONFIG_IPU_BRIDGE can be separately selected.

The CONFIG_CIO2_BRIDGE symbol becomes redundant as a result and is
removed.

Fixes: 2545a2c02ba1 ("media: ipu3-cio2: allow ipu_bridge to be a module again")
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: ipu3-cio2: allow ipu_bridge to be a module again

This code was previously part of the VIDEO_IPU3_CIO2 driver, which could
be built-in or a loadable module, but after the move it turned into a
builtin-only driver. This fails to link when the I2C subsystem is a
module:

x86_64-linux-ld: drivers/media/pci/intel/ipu-bridge.o: in function `ipu_bridge_unregister_sensors':
ipu-bridge.c:(.text+0x50): undefined reference to `i2c_unregister_device'
x86_64-linux-ld: drivers/media/pci/intel/ipu-bridge.o: in function `ipu_bridge_init':
ipu-bridge.c:(.text+0x9c9): undefined reference to `i2c_acpi_new_device_by_fwnode'

In general, drivers should not have to be built-in, so change the option
to a tristate with the corresponding dependency. This in turn opens a
new problem with the dependency, as the IPU bridge can be a loadable module
while the ipu3 driver itself is built-in, producing a new link failure:

86_64-linux-ld: drivers/media/pci/intel/ipu3/ipu3-cio2.o: in function `cio2_pci_probe':
ipu3-cio2.c:(.text+0x197e): undefined reference to `ipu_bridge_init'

In order to fix this, restore the old Kconfig option that controlled
the ipu bridge driver before it was split out, but make it select a
hidden symbol that now corresponds to the bridge driver.

When other drivers get added that share ipu-bridge, this should cover
all corner cases, and allow any combination of them to be built-in
or modular.

Link: https://lore.kernel.org/linux-media/20230727122331.2421453-1-arnd@kernel.org

Fixes: 881ca25978c6 ("media: ipu3-cio2: rename cio2 bridge to ipu bridge and move out of ipu3")'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ipu3-cio2: rename cio2 bridge to ipu bridge and move out of ipu3

cio2 bridge was involved along with IPU3. However, in fact all Intel IPUs
besides IPU3 CIO2 need this bridge driver. This patch move bridge driver
out of ipu3 directory and rename as ipu-bridge. Then it can be worked with
IPU3 and other Intel IPUs.

Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ipu3-cio2: make the bridge depend on i2c

drivers/media/pci/intel/ipu3/cio2-bridge.c: In function ‘cio2_bridge_unregister_sensors’:
drivers/media/pci/intel/ipu3/cio2-bridge.c:258:17: error: implicit declaration of function ‘i2c_unregister_device’; did you mean ‘spi_unregister_device’? [-Werror=implicit-function-declaration]
258 | i2c_unregister_device(sensor->vcm_i2c_client);
| ^~~~~~~~~~~~~~~~~~~~~
| spi_unregister_device

Link: https://lore.kernel.org/linux-media/S230142AbiJTWql/20221020224641Z+958@vger.kernel.org
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ipu3-cio2: make the bridge depend on i2c

drivers/media/pci/intel/ipu3/cio2-bridge.c: In function ‘cio2_bridge_unregister_sensors’:
drivers/media/pci/intel/ipu3/cio2-bridge.c:258:17: error: implicit declaration of function ‘i2c_unregister_device’; did you mean ‘spi_unregister_device’? [-Werror=implicit-function-declaration]
258 | i2c_unregister_device(sensor->vcm_i2c_client);
| ^~~~~~~~~~~~~~~~~~~~~
| spi_unregister_device

Link: https://lore.kernel.org/linux-media/S230142AbiJTWql/20221020224641Z+958@vger.kernel.org
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: Kconfig: cleanup VIDEO_DEV dependencies

media Kconfig has two entries associated to V4L API:
VIDEO_DEV and VIDEO_V4L2.

On Kernel 2.6.x, there were two V4L APIs, each one with its own flag.
VIDEO_DEV were meant to:
1) enable Video4Linux and make its Kconfig options to appear;
2) it makes the Kernel build the V4L core.

while VIDEO_V4L2 where used to distinguish between drivers that
implement the newer API and drivers that implemented the former one.

With time, such meaning changed, specially after the removal of
all V4L version 1 drivers.

At the current implementation, VIDEO_DEV only does (1): it enables
the media options related to V4L, that now has:

menu "Video4Linux options"
visible if VIDEO_DEV

source "drivers/media/v4l2-core/Kconfig"
endmenu

but it doesn't affect anymore the V4L core drivers.

The rationale is that the V4L2 core has a "soft" dependency
at the I2C bus, and now requires to select a number of other
Kconfig options:

config VIDEO_V4L2
tristate
depends on (I2C || I2C=n) && VIDEO_DEV
select RATIONAL
select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE
default (I2C || I2C=n) && VIDEO_DEV

In the past, merging them would be tricky, but it seems that it is now
possible to merge those symbols, in order to simplify V4L dependencies.

Let's keep VIDEO_DEV, as this one is used on some make *defconfig
configurations.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for meson-vdec & meson-ge2d
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ipu3-cio2: Build bridge only if ACPI is enabled

ipu3-cio2-bridge uses several features of the ACPI framework that have no
meaningful replacement when ACPI is disabled. Instead of adding #ifdefs to
the affected places, only build the bridge code if CONFIG_ACPI is enabled.

Fixes: 803abec64ef9 ("media: ipu3-cio2: Add cio2-bridge to ipu3-cio2 driver")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: ipu3-cio2: Add cio2-bridge to ipu3-cio2 driver

Currently on platforms designed for Windows, connections between CIO2 and
sensors are not properly defined in DSDT. This patch extends the ipu3-cio2
driver to compensate by building software_node connections, parsing the
connection properties from the sensor's SSDB buffer.

[Sakari Ailus: Make cio2_bridge_init static inline to a fix compiler
warning, wrapped a bunch of long lines.]

Suggested-by: Jordan Hand <jorhand@linux.microsoft.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: ipu3-cio2: Build only for x86

According to the original code in the driver it was never assumed to work
with big page sizes: unsigned short type followed by PAGE_SHIFT and
PAGE_MASK which may be different on non-x86 architectures.

Recently LKP found an issue on non-x86 architectures due to above
mentioned limitations. Since Sakari acknowledges that it's not really
useful to be able to compile this elsewhere, mark it x86 only.

Fixes: a31d19f88932 ("media: ipu3: allow building it with COMPILE_TEST on non-x86 archs")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: Kconfig files: use select for V4L2 subdevs and MC

There are lots of drivers that only work when the media controller
and/or the V4L2 subdev APIs are present.

Right now, someone need to first enable those APIs before
using those drivers.

Well, ideally, drivers, should, instead *optionally*
depend on it, in order for PC camera drivers to be able to use
them, but nowadays most drivers are UVC cameras, with don't
require a sensor driver.

So, be it.

Let's instead make them select the MEDIA_CONTROLLER and the
SUBDEV API, in order to make easier for people to be able
of enabling them.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: Kconfig files: use the right help coding style

Checkpatch wants to use 'help' instead of '---help---':

WARNING: prefer 'help' over '---help---' for new help texts

Let's change it globally at the media subsystem, as otherwise people
would keep using the old way.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: Remove depends on HAS_DMA in case of platform dependency

Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.

Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.

This simplifies the dependencies, and allows to improve compile-testing.

Note:
- The various VIDEOBUF*DMA* symbols had to loose their dependencies on
HAS_DMA, as they are selected by several individual drivers.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: intel-ipu3: Kconfig coding style issue

Kconfig Help statements are two-spaced after a single tab.

The incorrect spacing breaks menuconfig on older kernels.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: ipu3: allow building it with COMPILE_TEST on non-x86 archs

Despite depending on ACPI, this driver builds fine on non-x86
archtecture with COMPILE_TEST, as it doesn't depend on
ACPI-specific functions/structs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: intel-ipu3: cio2: add new MIPI-CSI2 driver

This patch adds CIO2 CSI-2 device driver for
Intel's IPU3 camera sub-system support.

Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Vijaykumar Ramya <ramya.vijaykumar@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>