#
aaeb31c0 |
|
14-May-2023 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
media: Switch i2c drivers back to use .probe() After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
#
75bcbaf7 |
|
18-Nov-2022 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
media: dvb-frontends/rtl2830: Convert to i2c's .probe_new() The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
#
ed5c2f5f |
|
15-Aug-2022 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
#
c942fddf |
|
27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
f1b1eabf |
|
05-Jul-2018 |
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> |
media: dvb: represent min/max/step/tolerance freqs in Hz Right now, satellite frontend drivers specify frequencies in kHz, while terrestrial/cable ones specify in Hz. That's confusing for developers. However, the main problem is that universal frontends capable of handling both satellite and non-satelite delivery systems are appearing. We end by needing to hack the drivers in order to support such hybrid frontends. So, convert everything to specify frontend frequencies in Hz. Tested-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
#
dfecde40 |
|
19-Jun-2018 |
Peter Rosin <peda@axentia.se> |
media: rtl2830: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT) Locking the root adapter for __i2c_transfer will deadlock if the device sits behind a mux-locked I2C mux. Switch to the finer-grained i2c_lock_bus with the I2C_LOCK_SEGMENT flag. If the device does not sit behind a mux-locked mux, the two locking variants are equivalent. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
#
bd336e63 |
|
09-Aug-2016 |
Max Kellermann <max.kellermann@gmail.com> |
[media] dvb: make DVB frontend *_ops instances "const" These are immutable. Making them "const" allows the compiler to move them to the "rodata" section. Note that cxd2841er_t_c_ops cannot be made "const", because cxd2841er_attach() modifies it. Ouch! [mchehab@s-opensource.com: fix merge conflicts] Signed-off-by: Max Kellermann <max.kellermann@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
4a7e445b |
|
29-Jun-2016 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: move statistics to read_status() Move statistics polling to read_status() in order to avoid use of kernel work. Also replace home made sign extension used for statistics with kernel sign_extend32(). Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
95e7cdb7 |
|
29-Jun-2016 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: do not allow driver unbind Disable runtime unbind as driver does not support it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
#
a0119159 |
|
20-Apr-2016 |
Peter Rosin <peda@axentia.se> |
[media] rtl2830: convert to use an explicit i2c mux core Allocate an explicit i2c mux core to handle parent and child adapters etc. Update the select op to be in terms of the i2c mux core instead of the child adapter. Tested-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
#
7e3e68bc |
|
03-Feb-2016 |
Mauro Carvalho Chehab <mchehab@kernel.org> |
[media] dvb_frontend: pass the props cache to get_frontend() as arg Instead of using the DTV properties cache directly, pass the get frontend data as an argument. For now, everything should remain the same, but the next patch will prevent get_frontend to affect the global cache. This is needed because several drivers don't care enough to only change the properties if locked. Due to that, calling G_PROPERTY before locking on those drivers will make them to never lock. Ok, those drivers are crap and should never be merged like that, but the core should not rely that the drivers would be doing the right thing. Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
4fd57ed6 |
|
09-Jan-2016 |
Ernst Martin Witte <emw-linux-kernel@nocabal.de> |
[media] rtl2830: cancel_delayed_work_sync before device removal / kfree rtl2830_remove was calling kfree(dev) with possibly still active schedule_delayed_work(&dev->stat_work). A similar bug in si2157 caused kernel panics in call_timer_fn e.g. after rmmod cx23885. Signed-off-by: Ernst Martin Witte <emw-linux-kernel@nocabal.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
04d8be05 |
|
10-Jul-2015 |
Krzysztof Kozlowski <krzk@kernel.org> |
[media] dvb-frontends: Drop owner assignment from i2c_driver i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
0df289a2 |
|
07-Jun-2015 |
Mauro Carvalho Chehab <mchehab@kernel.org> |
[media] dvb: Get rid of typedev usage for enums The DVB API was originally defined using typedefs. This is against Kernel CodingStyle, and there's no good usage here. While we can't remove its usage on userspace, we can avoid its usage in Kernelspace. So, let's do it. This patch was generated by this shell script: for j in $(grep typedef include/uapi/linux/dvb/frontend.h |cut -d' ' -f 3); do for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f); do sed "s,${j}_t,enum $j," <$i >a && mv a $i; done; done While here, make CodingStyle fixes on the affected lines. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> # for drivers/media/firewire/*
|
#
d858b0e7 |
|
03-Feb-2015 |
Mauro Carvalho Chehab <mchehab@kernel.org> |
[media] rtl2830: declare functions as static drivers/media/dvb-frontends/rtl2830.c:21:5: warning: no previous prototype for ‘rtl2830_bulk_write’ [-Wmissing-prototypes] int rtl2830_bulk_write(struct i2c_client *client, unsigned int reg, ^ drivers/media/dvb-frontends/rtl2830.c:33:5: warning: no previous prototype for ‘rtl2830_update_bits’ [-Wmissing-prototypes] int rtl2830_update_bits(struct i2c_client *client, unsigned int reg, ^ drivers/media/dvb-frontends/rtl2830.c:45:5: warning: no previous prototype for ‘rtl2830_bulk_read’ [-Wmissing-prototypes] int rtl2830_bulk_read(struct i2c_client *client, unsigned int reg, void *val, ^ Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
15d37f38 |
|
11-Dec-2014 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: convert to regmap API Use regmap to cover register access routines. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
fd4cfa8b |
|
09-Dec-2014 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: implement own I2C locking Own I2C locking is needed due to two special reasons: 1) Chips uses multiple register pages/banks on single I2C slave. Page is changed via I2C register access. 2) Chip offers muxed/gated I2C adapter for tuner. Gate/mux is controlled by I2C register access. Due to these reasons, I2C locking did not fit very well. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
df70ddad |
|
09-Dec-2014 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: implement PID filter Implement PID filter. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
6dcfe3cc |
|
09-Dec-2014 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: wrap DVBv5 CNR to DVBv3 SNR Change legacy DVBv3 read SNR to return values calculated by DVBv5 statistics. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
f491391c |
|
09-Dec-2014 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: wrap DVBv5 BER to DVBv3 Change legacy DVBv3 read BER to return values calculated by DVBv5 statistics. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
d512e286 |
|
09-Dec-2014 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: wrap DVBv5 signal strength to DVBv3 Change legacy DVBv3 signal strength to return values calculated by DVBv5 statistics. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
5bb11ca5 |
|
09-Dec-2014 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: implement DVBv5 BER statistic DVBv5 BER. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
871f7025 |
|
09-Dec-2014 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: implement DVBv5 signal strength statistics Estimate signal strength from IF AGC. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
47b4dbff |
|
09-Dec-2014 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: implement DVBv5 CNR statistic DVBv5 CNR. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
947debb4 |
|
08-Dec-2014 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: style related changes Trivial changes proposed by checkpatch.pl and some more. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
b8cb50d2 |
|
08-Dec-2014 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: get rid of internal config data Remove internal config and use configuration values directly from the platform data. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
7cc39328 |
|
08-Dec-2014 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: fix logging Pass correct device for dev_foo() logging in order to print logs correctly. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
1f153c4d |
|
08-Dec-2014 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: carry pointer to I2C client for every function As a I2C driver struct i2c_client is top level structure representing the driver. Use it as parameter to carry all needed information for each function in order to simplify things. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
f544f100 |
|
08-Dec-2014 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: rename 'priv' to 'dev' Use name 'dev' for device state instance as it is more common and also one letter shorter. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
aba4e34a |
|
08-Dec-2014 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: get rid of legacy DVB driver binding Remove legacy DVB binding as all users are using I2C binding. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
28c08799 |
|
07-Dec-2014 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: convert driver to kernel I2C model Convert driver to kernel I2C model. Old DVB proprietary model is still left there also. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
#
eed5b0cf |
|
21-Oct-2013 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: add parent for I2C adapter i2c i2c-6: adapter [RTL2830 tuner I2C adapter] registered BUG: unable to handle kernel NULL pointer dereference at 0000000000000220 IP: [<ffffffffa0002900>] i2c_register_adapter+0x130/0x390 [i2c_core] Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
#
68fd02d1 |
|
21-Oct-2013 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: add parent for I2C adapter i2c i2c-6: adapter [RTL2830 tuner I2C adapter] registered BUG: unable to handle kernel NULL pointer dereference at 0000000000000220 IP: [<ffffffffa0002900>] i2c_register_adapter+0x130/0x390 [i2c_core] Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
#
37ebaf68 |
|
02-Nov-2013 |
Mauro Carvalho Chehab <mchehab@kernel.org> |
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
#
a17ff2ee |
|
27-Oct-2012 |
Mauro Carvalho Chehab <mchehab@kernel.org> |
[media] rtl2830.c: get rid of warning: no previous prototype drivers/media/dvb-frontends/rtl2830.c:133:5: warning: no previous prototype for 'rtl2830_wr_reg_mask' [-Wmissing-prototypes] drivers/media/dvb-frontends/rtl2830.c:153:5: warning: no previous prototype for 'rtl2830_rd_reg_mask' [-Wmissing-prototypes] drivers/media/dvb-frontends/rtl2830.c:259:5: warning: no previous prototype for 'rtl2830_get_tune_settings' [-Wmissing-prototypes] Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
#
3a2fca26 |
|
12-Sep-2012 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: declare two tables as constant This optimizes few hundred bytes from data to text segment. Also remove one unused function that was commented out already. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
#
66b3c4de |
|
12-Sep-2012 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: use .get_if_frequency() Use .get_if_frequency() as all used tuner drivers (mt2060/qt1010/mxl5005s) supports it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
#
86ad0f1d |
|
12-Sep-2012 |
Antti Palosaari <crope@iki.fi> |
[media] rtl2830: use Kernel dev_foo() logging Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
#
9a0bf528 |
|
13-Aug-2012 |
Mauro Carvalho Chehab <mchehab@kernel.org> |
[media] move the dvb/frontends to drivers/media/dvb-frontends Raise the DVB frontends one level up, as the intention is to remove the drivers/media/dvb directory. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|