#
d4e3b928 |
|
17-Nov-2023 |
Kent Overstreet <kent.overstreet@linux.dev> |
closures: CLOSURE_CALLBACK() to fix type punning Control flow integrity is now checking that type signatures match on indirect function calls. That breaks closures, which embed a work_struct in a closure in such a way that a closure_fn may also be used as a workqueue fn by the underlying closure code. So we have to change closure fns to take a work_struct as their argument - but that results in a loss of clarity, as closure fns have different semantics from normal workqueue functions (they run owning a ref on the closure, which must be released with continue_at() or closure_return()). Thus, this patc introduces CLOSURE_CALLBACK() and closure_type() macros as suggested by Kees, to smooth things over a bit. Suggested-by: Kees Cook <keescook@chromium.org> Cc: Coly Li <colyli@suse.de> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
#
05bdb996 |
|
08-Jun-2023 |
Christoph Hellwig <hch@lst.de> |
block: replace fmode_t with a block-specific type for block open flags The only overlap between the block open flags mapped into the fmode_t and other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and ->ioctl and stop abusing fmode_t. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd] Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
c34b7ac6 |
|
06-Dec-2022 |
Christoph Hellwig <hch@lst.de> |
block: remove bio_set_op_attrs This macro is obsolete, so replace the last few uses with open coded bi_opf assignments. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Coly Li <colyli@suse.de <mailto:colyli@suse.de>> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20221206144057.720846-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
8032bf12 |
|
09-Oct-2022 |
Jason A. Donenfeld <Jason@zx2c4.com> |
treewide: use get_random_u32_below() instead of deprecated function This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Reviewed-by: SeongJae Park <sj@kernel.org> # for damon Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
#
81895a65 |
|
05-Oct-2022 |
Jason A. Donenfeld <Jason@zx2c4.com> |
treewide: use prandom_u32_max() when possible, part 1 Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
#
40f567bb |
|
27-May-2022 |
Jia-Ju Bai <baijiaju1990@gmail.com> |
md: bcache: check the return value of kzalloc() in detached_dev_do_request() The function kzalloc() in detached_dev_do_request() can fail, so its return value should be checked. Fixes: bc082a55d25c ("bcache: fix inaccurate io state for detached bcache devices") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20220527152818.27545-4-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
70200574 |
|
14-Apr-2022 |
Christoph Hellwig <hch@lst.de> |
block: remove QUEUE_FLAG_DISCARD Just use a non-zero max_discard_sectors as an indicator for discard support, similar to what is done for write zeroes. The only places where needs special attention is the RAID5 driver, which must clear discard support for security reasons by default, even if the default stacking rules would allow for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd] Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390] Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: David Sterba <dsterba@suse.com> [btrfs] Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
9dca4168 |
|
19-Apr-2022 |
Coly Li <colyli@suse.de> |
bcache: fix wrong bdev parameter when calling bio_alloc_clone() in do_bio_hook() Commit abfc426d1b2f ("block: pass a block_device to bio_clone_fast") calls the modified bio_alloc_clone() in bcache code as: bio_init_clone(bio->bi_bdev, bio, orig_bio, GFP_NOIO); But the first parameter is wrong, where bio->bi_bdev should be orig_bio->bi_bdev. The wrong bi_bdev panics the kernel when submitting cache bio. This patch fixes the wrong bdev parameter usage and avoid the panic. Fixes: abfc426d1b2f ("block: pass a block_device to bio_clone_fast") Signed-off-by: Coly Li <colyli@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20220419160425.4148-3-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
07fee7ab |
|
03-Mar-2022 |
Christoph Hellwig <hch@lst.de> |
bcache: use bvec_kmap_local in bio_csum Using local kmaps slightly reduces the chances to stray writes, and the bvec interface cleans up the code a little bit. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20220303111905.321089-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
abfc426d |
|
02-Feb-2022 |
Christoph Hellwig <hch@lst.de> |
block: pass a block_device to bio_clone_fast Pass a block_device to bio_clone_fast and __bio_clone_fast and give the functions more suitable names. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20220202160109.108149-14-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
a0e8de79 |
|
02-Feb-2022 |
Christoph Hellwig <hch@lst.de> |
block: initialize the target bio in __bio_clone_fast All callers of __bio_clone_fast initialize the bio first. Move that initialization into __bio_clone_fast instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20220202160109.108149-13-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
56b4b5ab |
|
02-Feb-2022 |
Christoph Hellwig <hch@lst.de> |
block: clone crypto and integrity data in __bio_clone_fast __bio_clone_fast should also clone integrity and crypto data, as a clone without those is incomplete. Right now the only caller that can actually support crypto and integrity data (dm) does it manually for the one callchain that supports these, but we better do it properly in the core. Note that all callers except for the above mentioned one also don't need to handle failure at all, given that the integrity and crypto clones are based on mempool allocations that won't fail for sleeping allocations. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20220202160109.108149-11-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
a7c50c94 |
|
24-Jan-2022 |
Christoph Hellwig <hch@lst.de> |
block: pass a block_device and opf to bio_reset Pass the block_device that we plan to use this bio for and the operation to bio_reset to optimize the assigment. A NULL block_device can be passed, both for the passthrough case on a raw request_queue and to temporarily avoid refactoring some nasty code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220124091107.642561-20-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
49add496 |
|
24-Jan-2022 |
Christoph Hellwig <hch@lst.de> |
block: pass a block_device and opf to bio_init Pass the block_device that we plan to use this bio for and the operation to bio_init to optimize the assignment. A NULL block_device can be passed, both for the passthrough case on a raw request_queue and to temporarily avoid refactoring some nasty code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220124091107.642561-19-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
609be106 |
|
24-Jan-2022 |
Christoph Hellwig <hch@lst.de> |
block: pass a block_device and opf to bio_alloc_bioset Pass the block_device and operation that we plan to use this bio for to bio_alloc_bioset to optimize the assigment. NULL/0 can be passed, both for the passthrough case on a raw request_queue and to temporarily avoid refactoring some nasty code. Also move the gfp_mask argument after the nr_vecs argument for a much more logical calling convention matching what most of the kernel does. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220124091107.642561-16-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
39fa7a95 |
|
20-Oct-2021 |
Christoph Hellwig <hch@lst.de> |
bcache: remove bch_crc64_update bch_crc64_update is an entirely pointless wrapper around crc64_be. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20211020143812.6403-9-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
0f5cd781 |
|
20-Oct-2021 |
Christoph Hellwig <hch@lst.de> |
bcache: remove the backing_dev_name field from struct cached_dev Just use the %pg format specifier to print the name directly. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20211020143812.6403-7-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
3e08773c |
|
12-Oct-2021 |
Christoph Hellwig <hch@lst.de> |
block: switch polling to be bio based Replace the blk_poll interface that requires the caller to keep a queue and cookie from the submissions with polling based on the bio. Polling for the bio itself leads to a few advantages: - the cookie construction can made entirely private in blk-mq.c - the caller does not need to remember the request_queue and cookie separately and thus sidesteps their lifetime issues - keeping the device and the cookie inside the bio allows to trivially support polling BIOs remapping by stacking drivers - a lot of code to propagate the cookie back up the submission path can be removed entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> Link: https://lore.kernel.org/r/20211012111226.760968-15-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
41fe8d08 |
|
07-Jun-2021 |
Coly Li <colyli@suse.de> |
bcache: avoid oversized read request in cache missing code path In the cache missing code path of cached device, if a proper location from the internal B+ tree is matched for a cache miss range, function cached_dev_cache_miss() will be called in cache_lookup_fn() in the following code block, [code block 1] 526 unsigned int sectors = KEY_INODE(k) == s->iop.inode 527 ? min_t(uint64_t, INT_MAX, 528 KEY_START(k) - bio->bi_iter.bi_sector) 529 : INT_MAX; 530 int ret = s->d->cache_miss(b, s, bio, sectors); Here s->d->cache_miss() is the call backfunction pointer initialized as cached_dev_cache_miss(), the last parameter 'sectors' is an important hint to calculate the size of read request to backing device of the missing cache data. Current calculation in above code block may generate oversized value of 'sectors', which consequently may trigger 2 different potential kernel panics by BUG() or BUG_ON() as listed below, 1) BUG_ON() inside bch_btree_insert_key(), [code block 2] 886 BUG_ON(b->ops->is_extents && !KEY_SIZE(k)); 2) BUG() inside biovec_slab(), [code block 3] 51 default: 52 BUG(); 53 return NULL; All the above panics are original from cached_dev_cache_miss() by the oversized parameter 'sectors'. Inside cached_dev_cache_miss(), parameter 'sectors' is used to calculate the size of data read from backing device for the cache missing. This size is stored in s->insert_bio_sectors by the following lines of code, [code block 4] 909 s->insert_bio_sectors = min(sectors, bio_sectors(bio) + reada); Then the actual key inserting to the internal B+ tree is generated and stored in s->iop.replace_key by the following lines of code, [code block 5] 911 s->iop.replace_key = KEY(s->iop.inode, 912 bio->bi_iter.bi_sector + s->insert_bio_sectors, 913 s->insert_bio_sectors); The oversized parameter 'sectors' may trigger panic 1) by BUG_ON() from the above code block. And the bio sending to backing device for the missing data is allocated with hint from s->insert_bio_sectors by the following lines of code, [code block 6] 926 cache_bio = bio_alloc_bioset(GFP_NOWAIT, 927 DIV_ROUND_UP(s->insert_bio_sectors, PAGE_SECTORS), 928 &dc->disk.bio_split); The oversized parameter 'sectors' may trigger panic 2) by BUG() from the agove code block. Now let me explain how the panics happen with the oversized 'sectors'. In code block 5, replace_key is generated by macro KEY(). From the definition of macro KEY(), [code block 7] 71 #define KEY(inode, offset, size) \ 72 ((struct bkey) { \ 73 .high = (1ULL << 63) | ((__u64) (size) << 20) | (inode), \ 74 .low = (offset) \ 75 }) Here 'size' is 16bits width embedded in 64bits member 'high' of struct bkey. But in code block 1, if "KEY_START(k) - bio->bi_iter.bi_sector" is very probably to be larger than (1<<16) - 1, which makes the bkey size calculation in code block 5 is overflowed. In one bug report the value of parameter 'sectors' is 131072 (= 1 << 17), the overflowed 'sectors' results the overflowed s->insert_bio_sectors in code block 4, then makes size field of s->iop.replace_key to be 0 in code block 5. Then the 0- sized s->iop.replace_key is inserted into the internal B+ tree as cache missing check key (a special key to detect and avoid a racing between normal write request and cache missing read request) as, [code block 8] 915 ret = bch_btree_insert_check_key(b, &s->op, &s->iop.replace_key); Then the 0-sized s->iop.replace_key as 3rd parameter triggers the bkey size check BUG_ON() in code block 2, and causes the kernel panic 1). Another kernel panic is from code block 6, is by the bvecs number oversized value s->insert_bio_sectors from code block 4, min(sectors, bio_sectors(bio) + reada) There are two possibility for oversized reresult, - bio_sectors(bio) is valid, but bio_sectors(bio) + reada is oversized. - sectors < bio_sectors(bio) + reada, but sectors is oversized. From a bug report the result of "DIV_ROUND_UP(s->insert_bio_sectors, PAGE_SECTORS)" from code block 6 can be 344, 282, 946, 342 and many other values which larther than BIO_MAX_VECS (a.k.a 256). When calling bio_alloc_bioset() with such larger-than-256 value as the 2nd parameter, this value will eventually be sent to biovec_slab() as parameter 'nr_vecs' in following code path, bio_alloc_bioset() ==> bvec_alloc() ==> biovec_slab() Because parameter 'nr_vecs' is larger-than-256 value, the panic by BUG() in code block 3 is triggered inside biovec_slab(). From the above analysis, we know that the 4th parameter 'sector' sent into cached_dev_cache_miss() may cause overflow in code block 5 and 6, and finally cause kernel panic in code block 2 and 3. And if result of bio_sectors(bio) + reada exceeds valid bvecs number, it may also trigger kernel panic in code block 3 from code block 6. Now the almost-useless readahead size for cache missing request back to backing device is removed, this patch can fix the oversized issue with more simpler method. - add a local variable size_limit, set it by the minimum value from the max bkey size and max bio bvecs number. - set s->insert_bio_sectors by the minimum value from size_limit, sectors, and the sectors size of bio. - replace sectors by s->insert_bio_sectors to do bio_next_split. By the above method with size_limit, s->insert_bio_sectors will never result oversized replace_key size or bio bvecs number. And split bio 'miss' from bio_next_split() will always match the size of 'cache_bio', that is the current maximum bio size we can sent to backing device for fetching the cache missing data. Current problmatic code can be partially found since Linux v3.13-rc1, therefore all maintained stable kernels should try to apply this fix. Reported-by: Alexander Ullrich <ealex1979@gmail.com> Reported-by: Diego Ercolani <diego.ercolani@gmail.com> Reported-by: Jan Szubiak <jan.szubiak@linuxpolska.pl> Reported-by: Marco Rebhan <me@dblsaiko.net> Reported-by: Matthias Ferdinand <bcache@mfedv.net> Reported-by: Victor Westerhuis <victor@westerhu.is> Reported-by: Vojtech Pavlik <vojtech@suse.cz> Reported-and-tested-by: Rolf Fokkens <rolf@rolffokkens.nl> Reported-and-tested-by: Thorsten Knabe <linux@thorsten-knabe.de> Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Cc: Christoph Hellwig <hch@lst.de> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Nix <nix@esperi.org.uk> Cc: Takashi Iwai <tiwai@suse.com> Link: https://lore.kernel.org/r/20210607125052.21277-3-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
1616a4c2 |
|
07-Jun-2021 |
Coly Li <colyli@suse.de> |
bcache: remove bcache device self-defined readahead For read cache missing, bcache defines a readahead size for the read I/O request to the backing device for the missing data. This readahead size is initialized to 0, and almost no one uses it to avoid unnecessary read amplifying onto backing device and write amplifying onto cache device. Considering upper layer file system code has readahead logic allready and works fine with readahead_cache_policy sysfile interface, we don't have to keep bcache self-defined readahead anymore. This patch removes the bcache self-defined readahead for cache missing request for backing device, and the readahead sysfs file interfaces are removed as well. This is the preparation for next patch to fix potential kernel panic due to oversized request in a simpler method. Reported-by: Alexander Ullrich <ealex1979@gmail.com> Reported-by: Diego Ercolani <diego.ercolani@gmail.com> Reported-by: Jan Szubiak <jan.szubiak@linuxpolska.pl> Reported-by: Marco Rebhan <me@dblsaiko.net> Reported-by: Matthias Ferdinand <bcache@mfedv.net> Reported-by: Victor Westerhuis <victor@westerhu.is> Reported-by: Vojtech Pavlik <vojtech@suse.cz> Reported-and-tested-by: Rolf Fokkens <rolf@rolffokkens.nl> Reported-and-tested-by: Thorsten Knabe <linux@thorsten-knabe.de> Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Nix <nix@esperi.org.uk> Cc: Takashi Iwai <tiwai@suse.com> Link: https://lore.kernel.org/r/20210607125052.21277-2-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
99dfc43e |
|
24-Jan-2021 |
Christoph Hellwig <hch@lst.de> |
block: use ->bi_bdev for bio based I/O accounting Rework the I/O accounting for bio based drivers to use ->bi_bdev. This means all drivers can now simply use bio_start_io_acct to start accounting, and it will take partitions into account automatically. To end I/O account either bio_end_io_acct can be used if the driver never remaps I/O to a different device, or bio_end_io_acct_remapped if the driver did remap the I/O. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
309dca30 |
|
24-Jan-2021 |
Christoph Hellwig <hch@lst.de> |
block: store a block_device pointer in struct bio Replace the gendisk pointer in struct bio with a pointer to the newly improved struct block device. From that the gendisk can be trivially accessed with an extra indirection, but it also allows to directly look up all information related to partition remapping. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
8446fe92 |
|
24-Nov-2020 |
Christoph Hellwig <hch@lst.de> |
block: switch partition lookup to use struct block_device Use struct block_device to lookup partitions on a disk. This removes all usage of struct hd_struct from the I/O path. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs] Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
a7cb3d2f |
|
03-Nov-2020 |
Christoph Hellwig <hch@lst.de> |
block: remove __blkdev_driver_ioctl Just open code it in the few callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
4a784266 |
|
01-Oct-2020 |
Coly Li <colyli@suse.de> |
bcache: remove embedded struct cache_sb from struct cache_set Since bcache code was merged into mainline kerrnel, each cache set only as one single cache in it. The multiple caches framework is here but the code is far from completed. Considering the multiple copies of cached data can also be stored on e.g. md raid1 devices, it is unnecessary to support multiple caches in one cache set indeed. The previous preparation patches fix the dependencies of explicitly making a cache set only have single cache. Now we don't have to maintain an embedded partial super block in struct cache_set, the in-memory super block can be directly referenced from struct cache. This patch removes the embedded struct cache_sb from struct cache_set, and fixes all locations where the superb lock was referenced from this removed super block by referencing the in-memory super block of struct cache. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
4e1ebae3 |
|
01-Oct-2020 |
Coly Li <colyli@suse.de> |
bcache: only use block_bytes() on struct cache Because struct cache_set and struct cache both have struct cache_sb, therefore macro block_bytes() can be used on both of them. When removing the embedded struct cache_sb from struct cache_set, this macro won't be used on struct cache_set anymore. This patch unifies all block_bytes() usage only on struct cache, this is one of the preparation to remove the embedded struct cache_sb from struct cache_set. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
0806e60f |
|
31-Aug-2020 |
Song Liu <songliubraving@fb.com> |
bcache: use part_[begin|end]_io_acct instead of disk_[begin|end]_io_acct This enables proper statistics in /proc/diskstats for bcache partitions. Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
c5be1f2c |
|
28-Jul-2020 |
Coly Li <colyli@suse.de> |
bcache: use disk_{start,end}_io_acct() to count I/O for bcache device This patch is a fix to patch "bcache: fix bio_{start,end}_io_acct with proper device". The previous patch uses a hack to temporarily set bi_disk to bcache device, which is mistaken too. As Christoph suggests, this patch uses disk_{start,end}_io_acct() to count I/O for bcache device in the correct way. Fixes: 85750aeb748f ("bcache: use bio_{start,end}_io_acct") Signed-off-by: Coly Li <colyli@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
a2f32ee8 |
|
25-Jul-2020 |
Coly Li <colyli@suse.de> |
bcache: fix bio_{start,end}_io_acct with proper device Commit 85750aeb748f ("bcache: use bio_{start,end}_io_acct") moves the io account code to the location after bio_set_dev(bio, dc->bdev) in cached_dev_make_request(). Then the account is performed incorrectly on backing device, indeed the I/O should be counted to bcache device like /dev/bcache0. With the mistaken I/O account, iostat does not display I/O counts for bcache device and all the numbers go to backing device. In writeback mode, the hard drive may have 340K+ IOPS which is impossible and wrong for spinning disk. This patch introduces bch_bio_start_io_acct() and bch_bio_end_io_acct(), which switches bio->bi_disk to bcache device before calling bio_start_io_acct() or bio_end_io_acct(). Now the I/Os are counted to bcache device, and bcache device, cache device and backing device have their correct I/O count information back. Fixes: 85750aeb748f ("bcache: use bio_{start,end}_io_acct") Signed-off-by: Coly Li <colyli@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
21cf8661 |
|
01-Jul-2020 |
Christoph Hellwig <hch@lst.de> |
writeback: remove bdi->congested_fn Except for pktdvd, the only places setting congested bits are file systems that allocate their own backing_dev_info structures. And pktdvd is a deprecated driver that isn't useful in stack setup either. So remove the dead congested_fn stacking infrastructure. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Song Liu <song@kernel.org> Acked-by: David Sterba <dsterba@suse.com> [axboe: fixup unused variables in bcache/request.c] Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
ed00aabd |
|
01-Jul-2020 |
Christoph Hellwig <hch@lst.de> |
block: rename generic_make_request to submit_bio_noacct generic_make_request has always been very confusingly misnamed, so rename it to submit_bio_noacct to make it clear that it is submit_bio minus accounting and a few checks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
c62b37d9 |
|
01-Jul-2020 |
Christoph Hellwig <hch@lst.de> |
block: move ->make_request_fn to struct block_device_operations The make_request_fn is a little weird in that it sits directly in struct request_queue instead of an operation vector. Replace it with a block_device_operations method called submit_bio (which describes much better what it does). Also remove the request_queue argument to it, as the queue can be derived pretty trivially from the bio. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
85750aeb |
|
26-May-2020 |
Christoph Hellwig <hch@lst.de> |
bcache: use bio_{start,end}_io_acct Switch bcache to use the nicer bio accounting helpers, and call the routines where we also sample the start time to give coherent accounting results. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
46f5aa88 |
|
26-May-2020 |
Joe Perches <joe@perches.com> |
bcache: Convert pr_<level> uses to a more typical style Remove the trailing newline from the define of pr_fmt and add newlines to the uses. Miscellanea: o Convert bch_bkey_dump from multiple uses of pr_err to pr_cont as the earlier conversion was inappropriate done causing multiple lines to be emitted where only a single output line was desired o Use vsprintf extension %pV in bch_cache_set_error to avoid multiple line output where only a single line output was desired o Coalesce formats Fixes: 6ae63e3501c4 ("bcache: replace printk() by pr_*() routines") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
a91b2014 |
|
25-Apr-2020 |
Christoph Hellwig <hch@lst.de> |
bcache: remove a duplicate ->make_request_fn assignment The make_request_fn pointer should only be assigned by blk_alloc_queue. Fix a left over manual initialization. Fixes: ff27668ce809 ("bcache: pass the make_request methods to blk_queue_make_request") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
ff27668c |
|
27-Mar-2020 |
Christoph Hellwig <hch@lst.de> |
bcache: pass the make_request methods to blk_queue_make_request bcache is the only driver not actually passing its make_request methods to blk_queue_make_request, but instead just sets them up manually a little later. Make bcache follow the common way of setting up make_request based queues. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
038ba8cc |
|
01-Feb-2020 |
Coly Li <colyli@suse.de> |
bcache: add readahead cache policy options via sysfs interface In year 2007 high performance SSD was still expensive, in order to save more space for real workload or meta data, the readahead I/Os for non-meta data was bypassed and not cached on SSD. In now days, SSD price drops a lot and people can find larger size SSD with more comfortable price. It is unncessary to alway bypass normal readahead I/Os to save SSD space for now. This patch adds options for readahead data cache policies via sysfs file /sys/block/bcache<N>/readahead_cache_policy, the options are, - "all": cache all readahead data I/Os. - "meta-only": only cache meta data, and bypass other regular I/Os. If users want to make bcache continue to only cache readahead request for metadata and bypass regular data readahead, please set "meta-only" to this sysfs file. By default, bcache will back to cache all read- ahead requests now. Cc: stable@vger.kernel.org Signed-off-by: Coly Li <colyli@suse.de> Acked-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
41fa4dee |
|
13-Nov-2019 |
Coly Li <colyli@suse.de> |
bcache: deleted code comments for dead code in bch_data_insert_keys() In request.c:bch_data_insert_keys(), there is code comment for a piece of dead code. This patch deletes the dead code and its code comment since they are useless in practice. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
3a394727 |
|
24-Apr-2019 |
George Spelvin <lkml@sdf.org> |
bcache: Clean up bch_get_congested() There are a few nits in this function. They could in theory all be separate patches, but that's probably taking small commits too far. 1) I added a brief comment saying what it does. 2) I like to declare pointer parameters "const" where possible for documentation reasons. 3) It uses bitmap_weight(&rand, BITS_PER_LONG) to compute the Hamming weight of a 32-bit random number (giving a random integer with mean 16 and variance 8). Passing by reference in a 64-bit variable is silly; just use hweight32(). 4) Its helper function fract_exp_two is unnecessarily tangled. Gcc can optimize the multiply by (1 << x) to a shift, but it can be written in a much more straightforward way at the cost of one more bit of internal precision. Some analysis reveals that this bit is always available. This shrinks the object code for fract_exp_two(x, 6) from 23 bytes: 0000000000000000 <foo1>: 0: 89 f9 mov %edi,%ecx 2: c1 e9 06 shr $0x6,%ecx 5: b8 01 00 00 00 mov $0x1,%eax a: d3 e0 shl %cl,%eax c: 83 e7 3f and $0x3f,%edi f: d3 e7 shl %cl,%edi 11: c1 ef 06 shr $0x6,%edi 14: 01 f8 add %edi,%eax 16: c3 retq To 19: 0000000000000017 <foo2>: 17: 89 f8 mov %edi,%eax 19: 83 e0 3f and $0x3f,%eax 1c: 83 c0 40 add $0x40,%eax 1f: 89 f9 mov %edi,%ecx 21: c1 e9 06 shr $0x6,%ecx 24: d3 e0 shl %cl,%eax 26: c1 e8 06 shr $0x6,%eax 29: c3 retq (Verified with 0 <= frac_bits <= 8, 0 <= x < 16<<frac_bits; both versions produce the same output.) 5) And finally, the call to bch_get_congested() in check_should_bypass() is separated from the use of the value by multiple tests which could moot the need to compute it. Move the computation down to where it's needed. This also saves a local register to hold the computed value. Signed-off-by: George Spelvin <lkml@sdf.org> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
1568ee7e |
|
24-Apr-2019 |
Guoju Fang <fangguoju@gmail.com> |
bcache: fix crashes stopping bcache device before read miss done The bio from upper layer is considered completed when bio_complete() returns. In most scenarios bio_complete() is called in search_free(), but when read miss happens, the bio_compete() is called when backing device reading completed, while the struct search is still in use until cache inserting finished. If someone stops the bcache device just then, the device may be closed and released, but after cache inserting finished the struct search will access a freed struct cached_dev. This patch add the reference of bcache device before bio_complete() when read miss happens, and put it after the search is not used. Signed-off-by: Guoju Fang <fangguoju@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
dc7292a5 |
|
08-Feb-2019 |
Coly Li <colyli@suse.de> |
bcache: use (REQ_META|REQ_PRIO) to indicate bio for metadata In 'commit 752f66a75aba ("bcache: use REQ_PRIO to indicate bio for metadata")' REQ_META is replaced by REQ_PRIO to indicate metadata bio. This assumption is not always correct, e.g. XFS uses REQ_META to mark metadata bio other than REQ_PRIO. This is why Nix noticed that bcache does not cache metadata for XFS after the above commit. Thanks to Dave Chinner, he explains the difference between REQ_META and REQ_PRIO from view of file system developer. Here I quote part of his explanation from mailing list, REQ_META is used for metadata. REQ_PRIO is used to communicate to the lower layers that the submitter considers this IO to be more important that non REQ_PRIO IO and so dispatch should be expedited. IOWs, if the filesystem considers metadata IO to be more important that user data IO, then it will use REQ_PRIO | REQ_META rather than just REQ_META. Then it seems bios with REQ_META or REQ_PRIO should both be cached for performance optimation, because they are all probably low I/O latency demand by upper layer (e.g. file system). So in this patch, when we want to decide whether to bypass the cache, REQ_META and REQ_PRIO are both checked. Then both metadata and high priority I/O requests will be handled properly. Reported-by: Nix <nix@esperi.org.uk> Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Andre Noll <maan@tuebingen.mpg.de> Tested-by: Nix <nix@esperi.org.uk> Cc: stable@vger.kernel.org Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
3db4d078 |
|
13-Dec-2018 |
Shenghui Wang <shhuiw@foxmail.com> |
bcache: update comment for bch_data_insert commit 220bb38c21b8 ("bcache: Break up struct search") introduced changes to struct search and s->iop. bypass/bio are fields of struct data_insert_op now. Update the comment. Signed-off-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
dd0c9179 |
|
08-Oct-2018 |
Tang Junhui <tang.junhui.linux@gmail.com> |
bcache: fix ioctl in flash device When doing ioctl in flash device, it will call ioctl_dev() in super.c, then we should not to get cached device since flash only device has no backend device. This patch just move the jugement dc->io_disable to cached_dev_ioctl() to make ioctl in flash device correctly. Fixes: 0f0709e6bfc3c ("bcache: stop bcache device when backing device is offline") Signed-off-by: Tang Junhui <tang.junhui.linux@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
752f66a7 |
|
08-Oct-2018 |
Coly Li <colyli@suse.de> |
bcache: use REQ_PRIO to indicate bio for metadata In cached_dev_cache_miss() and check_should_bypass(), REQ_META is used to check whether a bio is for metadata request. REQ_META is used for blktrace, the correct REQ_ flag should be REQ_PRIO. This flag means the bio should be prior to other bio, and frequently be used to indicate metadata io in file system code. This patch replaces REQ_META with correct flag REQ_PRIO. CC Adam Manzanares because he explains to me what REQ_PRIO is for. Signed-off-by: Coly Li <colyli@suse.de> Cc: Adam Manzanares <adam.manzanares@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
502b2915 |
|
08-Oct-2018 |
Tang Junhui <tang.junhui.linux@gmail.com> |
bcache: trace missed reading by cache_missed Missed reading IOs are identified by s->cache_missed, not the s->cache_miss, so in trace_bcache_read() using trace_bcache_read to identify whether the IO is missed or not. Signed-off-by: Tang Junhui <tang.junhui.linux@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
3069211b |
|
10-Aug-2018 |
Coly Li <colyli@suse.de> |
bcache: do not check NULL pointer before calling kmem_cache_destroy kmem_cache_destroy() is safe for NULL pointer as input, the NULL pointer checking is unncessary. This patch just removes the NULL pointer checking to make code simpler. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
2b1edd23 |
|
10-Aug-2018 |
Coly Li <colyli@suse.de> |
bcache: fix typo 'succesfully' to 'successfully' This patch fixes typo 'succesfully' to correct 'successfully', which is suggested by checkpatch.pl. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
b0d30981 |
|
10-Aug-2018 |
Coly Li <colyli@suse.de> |
bcache: style fixes for lines over 80 characters This patch fixes the lines over 80 characters into more lines, to minimize warnings by checkpatch.pl. There are still some lines exceed 80 characters, but it is better to be a single line and I don't change them. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
fc2d5988 |
|
10-Aug-2018 |
Coly Li <colyli@suse.de> |
bcache: add identifier names to arguments of function definitions There are many function definitions do not have identifier argument names, scripts/checkpatch.pl complains warnings like this, WARNING: function definition argument 'struct bcache_device *' should also have an identifier name #16735: FILE: writeback.h:120: +void bch_sectors_dirty_init(struct bcache_device *); This patch adds identifier argument names to all bcache function definitions to fix such warnings. Signed-off-by: Coly Li <colyli@suse.de> Reviewed: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
1fae7cf0 |
|
10-Aug-2018 |
Coly Li <colyli@suse.de> |
bcache: style fix to add a blank line after declarations Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
6f10f7d1 |
|
10-Aug-2018 |
Coly Li <colyli@suse.de> |
bcache: style fix to replace 'unsigned' by 'unsigned int' This patch fixes warning reported by checkpatch.pl by replacing 'unsigned' with 'unsigned int'. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
ea8c5356 |
|
09-Aug-2018 |
Coly Li <colyli@suse.de> |
bcache: set max writeback rate when I/O request is idle Commit b1092c9af9ed ("bcache: allow quick writeback when backing idle") allows the writeback rate to be faster if there is no I/O request on a bcache device. It works well if there is only one bcache device attached to the cache set. If there are many bcache devices attached to a cache set, it may introduce performance regression because multiple faster writeback threads of the idle bcache devices will compete the btree level locks with the bcache device who have I/O requests coming. This patch fixes the above issue by only permitting fast writebac when all bcache devices attached on the cache set are idle. And if one of the bcache devices has new I/O request coming, minimized all writeback throughput immediately and let PI controller __update_writeback_rate() to decide the upcoming writeback rate for each bcache device. Also when all bcache devices are idle, limited wrieback rate to a small number is wast of thoughput, especially when backing devices are slower non-rotation devices (e.g. SATA SSD). This patch sets a max writeback rate for each backing device if the whole cache set is idle. A faster writeback rate in idle time means new I/Os may have more available space for dirty data, and people may observe a better write performance then. Please note bcache may change its cache mode in run time, and this patch still works if the cache mode is switched from writeback mode and there is still dirty data on cache. Fixes: Commit b1092c9af9ed ("bcache: allow quick writeback when backing idle") Cc: stable@vger.kernel.org #4.16+ Signed-off-by: Coly Li <colyli@suse.de> Tested-by: Kai Krakow <kai@kaishome.de> Tested-by: Stefan Priebe <s.priebe@profihost.ag> Cc: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
0cba2e71 |
|
09-Aug-2018 |
Coly Li <colyli@suse.de> |
bcache: fix mistaken comments in request.c This patch updates code comment in bch_keylist_realloc() by fixing incorrected function names, to make the code to be more comprehennsible. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
5c25c4fc |
|
25-Jul-2018 |
Tang Junhui <tang.junhui@zte.com.cn> |
bcache: finish incremental GC In GC thread, we record the latest GC key in gc_done, which is expected to be used for incremental GC, but in currently code, we didn't realize it. When GC runs, front side IO would be blocked until the GC over, it would be a long time if there is a lot of btree nodes. This patch realizes incremental GC, the main ideal is that, when there are front side I/Os, after GC some nodes (100), we stop GC, release locker of the btree node, and go to process the front side I/Os for some times (100 ms), then go back to GC again. By this patch, when we doing GC, I/Os are not blocked all the time, and there is no obvious I/Os zero jump problem any more. Patch v2: Rename some variables and macros name as Coly suggested. Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
ddcf35d3 |
|
18-Jul-2018 |
Michael Callahan <michaelcallahan@fb.com> |
block: Add and use op_stat_group() for indexing disk_stat fields. Add and use a new op_stat_group() function for indexing partition stat fields rather than indexing them by rq_data_dir() or bio_data_dir(). This function works similarly to op_is_sync() in that it takes the request::cmd_flags or bio::bi_opf flags and determines which stats should et updated. In addition, the second parameter to generic_start_io_acct() and generic_end_io_acct() is now a REQ_OP rather than simply a read or write bit and it uses op_stat_group() on the parameter to determine the stat group. Note that the partition in_flight counts are not part of the per-cpu statistics and as such are not indexed via this function. It's now indexed by op_is_write(). tj: Refreshed on top of v4.17. Updated to pass around REQ_OP. Signed-off-by: Michael Callahan <michaelcallahan@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Matias Bjorling <mb@lightnvm.io> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Alasdair Kergon <agk@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
d19936a2 |
|
20-May-2018 |
Kent Overstreet <kent.overstreet@gmail.com> |
bcache: convert to bioset_init()/mempool_init() Convert bcache to embedded bio sets. Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
6e916a7e |
|
03-May-2018 |
Coly Li <colyli@suse.de> |
bcache: store disk name in struct cache and struct cached_dev Current code uses bdevname() or bio_devname() to reference gendisk disk name when bcache needs to display the disk names in kernel message. It was safe before bcache device failure handling patch set merged in, because when devices are failed, there was deadlock to prevent bcache printing error messages with gendisk disk name. But after the failure handling patch set merged, the deadlock is fixed, so it is possible that the gendisk structure bdev->hd_disk is released when bdevname() is called to reference bdev->bd_disk->disk_name[]. This is why I receive bug report of NULL pointers deference panic. This patch stores gendisk disk name in a buffer inside struct cache and struct cached_dev, then print out the offline device name won't reference bdev->hd_disk anymore. And this patch also avoids extra function calls of bdevname() and bio_devnmae(). Changelog: v3, add Reviewed-by from Hannes. v2, call bdevname() earlier in register_bdev() v1, first version with segguestion from Junhui Tang. Fixes: c7b7bd07404c5 ("bcache: add io_disable to struct cached_dev") Fixes: 5138ac6748e38 ("bcache: fix misleading error message in bch_count_io_errors()") Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
47344e33 |
|
18-Mar-2018 |
Bart Van Assche <bvanassche@acm.org> |
bcache: Fix kernel-doc warnings Avoid that building with W=1 triggers warnings about the kernel-doc headers. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
c7b7bd07 |
|
18-Mar-2018 |
Coly Li <colyli@suse.de> |
bcache: add io_disable to struct cached_dev If a bcache device is configured to writeback mode, current code does not handle write I/O errors on backing devices properly. In writeback mode, write request is written to cache device, and latter being flushed to backing device. If I/O failed when writing from cache device to the backing device, bcache code just ignores the error and upper layer code is NOT noticed that the backing device is broken. This patch tries to handle backing device failure like how the cache device failure is handled, - Add a error counter 'io_errors' and error limit 'error_limit' in struct cached_dev. Add another io_disable to struct cached_dev to disable I/Os on the problematic backing device. - When I/O error happens on backing device, increase io_errors counter. And if io_errors reaches error_limit, set cache_dev->io_disable to true, and stop the bcache device. The result is, if backing device is broken of disconnected, and I/O errors reach its error limit, backing device will be disabled and the associated bcache device will be removed from system. Changelog: v2: remove "bcache: " prefix in pr_error(), and use correct name string to print out bcache device gendisk name. v1: indeed this is new added in v2 patch set. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
27a40ab9 |
|
18-Mar-2018 |
Coly Li <colyli@suse.de> |
bcache: add backing_request_endio() for bi_end_io In order to catch I/O error of backing device, a separate bi_end_io call back is required. Then a per backing device counter can record I/O errors number and retire the backing device if the counter reaches a per backing device I/O error limit. This patch adds backing_request_endio() to bcache backing device I/O code path, this is a preparation for further complicated backing device failure handling. So far there is no real code logic change, I make this change a separate patch to make sure it is stable and reliable for further work. Changelog: v2: Fix code comments typo, remove a redundant bch_writeback_add() line added in v4 patch set. v1: indeed this is new added in this patch set. [mlyle: truncated commit subject] Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Cc: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
bc082a55 |
|
18-Mar-2018 |
Tang Junhui <tang.junhui@zte.com.cn> |
bcache: fix inaccurate io state for detached bcache devices When we run IO in a detached device, and run iostat to shows IO status, normally it will show like bellow (Omitted some fields): Device: ... avgrq-sz avgqu-sz await r_await w_await svctm %util sdd ... 15.89 0.53 1.82 0.20 2.23 1.81 52.30 bcache0 ... 15.89 115.42 0.00 0.00 0.00 2.40 69.60 but after IO stopped, there are still very big avgqu-sz and %util values as bellow: Device: ... avgrq-sz avgqu-sz await r_await w_await svctm %util bcache0 ... 0 5326.32 0.00 0.00 0.00 0.00 100.10 The reason for this issue is that, only generic_start_io_acct() called and no generic_end_io_acct() called for detached device in cached_dev_make_request(). See the code: //start generic_start_io_acct() generic_start_io_acct(q, rw, bio_sectors(bio), &d->disk->part0); if (cached_dev_get(dc)) { //will callback generic_end_io_acct() } else { //will not call generic_end_io_acct() } This patch calls generic_end_io_acct() in the end of IO for detached devices, so we can show IO state correctly. (Modified to use GFP_NOIO in kzalloc() by Coly Li) Changelog: v2: fix typo. v1: the initial version. Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
771f393e |
|
18-Mar-2018 |
Coly Li <colyli@suse.de> |
bcache: add CACHE_SET_IO_DISABLE to struct cache_set flags When too many I/Os failed on cache device, bch_cache_set_error() is called in the error handling code path to retire whole problematic cache set. If new I/O requests continue to come and take refcount dc->count, the cache set won't be retired immediately, this is a problem. Further more, there are several kernel thread and self-armed kernel work may still running after bch_cache_set_error() is called. It needs to wait quite a while for them to stop, or they won't stop at all. They also prevent the cache set from being retired. The solution in this patch is, to add per cache set flag to disable I/O request on this cache and all attached backing devices. Then new coming I/O requests can be rejected in *_make_request() before taking refcount, kernel threads and self-armed kernel worker can stop very fast when flags bit CACHE_SET_IO_DISABLE is set. Because bcache also do internal I/Os for writeback, garbage collection, bucket allocation, journaling, this kind of I/O should be disabled after bch_cache_set_error() is called. So closure_bio_submit() is modified to check whether CACHE_SET_IO_DISABLE is set on cache_set->flags. If set, closure_bio_submit() will set bio->bi_status to BLK_STS_IOERR and return, generic_make_request() won't be called. A sysfs interface is also added to set or clear CACHE_SET_IO_DISABLE bit from cache_set->flags, to disable or enable cache set I/O for debugging. It is helpful to trigger more corner case issues for failed cache device. Changelog v4, add wait_for_kthread_stop(), and call it before exits writeback and gc kernel threads. v3, change CACHE_SET_IO_DISABLE from 4 to 3, since it is bit index. remove "bcache: " prefix when printing out kernel message. v2, more changes by previous review, - Use CACHE_SET_IO_DISABLE of cache_set->flags, suggested by Junhui. - Check CACHE_SET_IO_DISABLE in bch_btree_gc() to stop a while-loop, this is reported and inspired from origal patch of Pavel Vazharov. v1, initial version. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Cc: Michael Lyle <mlyle@lyle.org> Cc: Pavel Vazharov <freakpv@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
60eb34ec |
|
27-Feb-2018 |
Tang Junhui <tang.junhui@zte.com.cn> |
bcache: fix kcrashes with fio in RAID5 backend dev Kernel crashed when run fio in a RAID5 backend bcache device, the call trace is bellow: [ 440.012034] kernel BUG at block/blk-ioc.c:146! [ 440.012696] invalid opcode: 0000 [#1] SMP NOPTI [ 440.026537] CPU: 2 PID: 2205 Comm: md127_raid5 Not tainted 4.15.0 #8 [ 440.027441] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 07/16 /2015 [ 440.028615] RIP: 0010:put_io_context+0x8b/0x90 [ 440.029246] RSP: 0018:ffffa8c882b43af8 EFLAGS: 00010246 [ 440.029990] RAX: 0000000000000000 RBX: ffffa8c88294fca0 RCX: 0000000000 0f4240 [ 440.031006] RDX: 0000000000000004 RSI: 0000000000000286 RDI: ffffa8c882 94fca0 [ 440.032030] RBP: ffffa8c882b43b10 R08: 0000000000000003 R09: ffff949cb8 0c1700 [ 440.033206] R10: 0000000000000104 R11: 000000000000b71c R12: 00000000000 01000 [ 440.034222] R13: 0000000000000000 R14: ffff949cad84db70 R15: ffff949cb11 bd1e0 [ 440.035239] FS: 0000000000000000(0000) GS:ffff949cba280000(0000) knlGS: 0000000000000000 [ 440.060190] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 440.084967] CR2: 00007ff0493ef000 CR3: 00000002f1e0a002 CR4: 00000000001 606e0 [ 440.110498] Call Trace: [ 440.135443] bio_disassociate_task+0x1b/0x60 [ 440.160355] bio_free+0x1b/0x60 [ 440.184666] bio_put+0x23/0x30 [ 440.208272] search_free+0x23/0x40 [bcache] [ 440.231448] cached_dev_write_complete+0x31/0x70 [bcache] [ 440.254468] closure_put+0xb6/0xd0 [bcache] [ 440.277087] request_endio+0x30/0x40 [bcache] [ 440.298703] bio_endio+0xa1/0x120 [ 440.319644] handle_stripe+0x418/0x2270 [raid456] [ 440.340614] ? load_balance+0x17b/0x9c0 [ 440.360506] handle_active_stripes.isra.58+0x387/0x5a0 [raid456] [ 440.380675] ? __release_stripe+0x15/0x20 [raid456] [ 440.400132] raid5d+0x3ed/0x5d0 [raid456] [ 440.419193] ? schedule+0x36/0x80 [ 440.437932] ? schedule_timeout+0x1d2/0x2f0 [ 440.456136] md_thread+0x122/0x150 [ 440.473687] ? wait_woken+0x80/0x80 [ 440.491411] kthread+0x102/0x140 [ 440.508636] ? find_pers+0x70/0x70 [ 440.524927] ? kthread_associate_blkcg+0xa0/0xa0 [ 440.541791] ret_from_fork+0x35/0x40 [ 440.558020] Code: c2 48 00 5b 41 5c 41 5d 5d c3 48 89 c6 4c 89 e7 e8 bb c2 48 00 48 8b 3d bc 36 4b 01 48 89 de e8 7c f7 e0 ff 5b 41 5c 41 5d 5d c3 <0f> 0b 0f 1f 00 0f 1f 44 00 00 55 48 8d 47 b8 48 89 e5 41 57 41 [ 440.610020] RIP: put_io_context+0x8b/0x90 RSP: ffffa8c882b43af8 [ 440.628575] ---[ end trace a1fd79d85643a73e ]-- All the crash issue happened when a bypass IO coming, in such scenario s->iop.bio is pointed to the s->orig_bio. In search_free(), it finishes the s->orig_bio by calling bio_complete(), and after that, s->iop.bio became invalid, then kernel would crash when calling bio_put(). Maybe its upper layer's faulty, since bio should not be freed before we calling bio_put(), but we'd better calling bio_put() first before calling bio_complete() to notify upper layer ending this bio. This patch moves bio_complete() under bio_put() to avoid kernel crash. [mlyle: fixed commit subject for character limits] Reported-by: Matthias Ferdinand <bcache@mfedv.net> Tested-by: Matthias Ferdinand <bcache@mfedv.net> Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
b40503ea |
|
08-Jan-2018 |
Zhai Zhaoxuan <kxuanobj@gmail.com> |
bcache: fix unmatched generic_end_io_acct() & generic_start_io_acct() The function cached_dev_make_request() and flash_dev_make_request() call generic_start_io_acct() with (struct bcache_device)->disk when they start a closure. Then the function bio_complete() calls generic_end_io_acct() with (struct search)->orig_bio->bi_disk when the closure has done. Since the `bi_disk` is not the bcache device, the generic_end_io_acct() is called with a wrong device queue. It causes the "inflight" (in struct hd_struct) counter keep increasing without decreasing. This patch fix the problem by calling generic_end_io_acct() with (struct bcache_device)->disk. Signed-off-by: Zhai Zhaoxuan <kxuanobj@gmail.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
b1092c9a |
|
08-Jan-2018 |
Michael Lyle <mlyle@lyle.org> |
bcache: allow quick writeback when backing idle If the control system would wait for at least half a second, and there's been no reqs hitting the backing disk for awhile: use an alternate mode where we have at most one contiguous set of writebacks in flight at a time. (But don't otherwise delay). If front-end IO appears, it will still be quick, as it will only have to contend with one real operation in flight. But otherwise, we'll be sending data to the backing disk as quickly as it can accept it (with one op at a time). Signed-off-by: Michael Lyle <mlyle@lyle.org> Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
b221fc13 |
|
08-Jan-2018 |
Rui Hua <huarui.dev@gmail.com> |
bcache: ret IOERR when read meets metadata error The read request might meet error when searching the btree, but the error was not handled in cache_lookup(), and this kind of metadata failure will not go into cached_dev_read_error(), finally, the upper layer will receive bi_status=0. In this patch we judge the metadata error by the return value of bch_btree_map_keys(), there are two potential paths give rise to the error: 1. Because the btree is not totally cached in memery, we maybe get error when read btree node from cache device (see bch_btree_node_get()), the likely errno is -EIO, -ENOMEM 2. When read miss happens, bch_btree_insert_check_key() will be called to insert a "replace_key" to btree(see cached_dev_cache_miss(), just for doing preparatory work before insert the missed data to cache device), a failure can also happen in this situation, the likely errno is -ENOMEM bch_btree_map_keys() will return MAP_DONE in normal scenario, but we will get either -EIO or -ENOMEM in above two cases. if this happened, we should NOT recover data from backing device (when cache device is dirty) because we don't know whether bkeys the read request covered are all clean. And after that happened, s->iop.status is still its initially value(0) before we submit s->bio.bio, we set it to BLK_STS_IOERR, so it can go into cached_dev_read_error(), and finally it can be passed to upper layer, or recovered by reread from backing device. [edit by mlyle: patch formatting, word-wrap, comment spelling, commit log format] Signed-off-by: Hua Rui <huarui.dev@gmail.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
25d8be77 |
|
18-Dec-2017 |
Ming Lei <ming.lei@redhat.com> |
block: move bio_alloc_pages() to bcache bcache is the only user of bio_alloc_pages(), so move this function into bcache, and avoid it being misused in the future. Also rename it to bch_bio_allo_pages() since it is bcache only. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
e393aa24 |
|
24-Nov-2017 |
Rui Hua <huarui.dev@gmail.com> |
bcache: recover data from backing when data is clean When we send a read request and hit the clean data in cache device, there is a situation called cache read race in bcache(see the commit in the tail of cache_look_up(), the following explaination just copy from there): The bucket we're reading from might be reused while our bio is in flight, and we could then end up reading the wrong data. We guard against this by checking (in bch_cache_read_endio()) if the pointer is stale again; if so, we treat it as an error (s->iop.error = -EINTR) and reread from the backing device (but we don't pass that error up anywhere) It should be noted that cache read race happened under normal circumstances, not the circumstance when SSD failed, it was counted and shown in /sys/fs/bcache/XXX/internal/cache_read_races. Without this patch, when we use writeback mode, we will never reread from the backing device when cache read race happened, until the whole cache device is clean, because the condition (s->recoverable && (dc && !atomic_read(&dc->has_dirty))) is false in cached_dev_read_error(). In this situation, the s->iop.error(= -EINTR) will be passed up, at last, user will receive -EINTR when it's bio end, this is not suitable, and wield to up-application. In this patch, we use s->read_dirty_data to judge whether the read request hit dirty data in cache device, it is safe to reread data from the backing device when the read request hit clean data. This can not only handle cache read race, but also recover data when failed read request from cache device. [edited by mlyle to fix up whitespace, commit log title, comment spelling] Fixes: d59b23795933 ("bcache: only permit to recovery read error when cache device is clean") Cc: <stable@vger.kernel.org> # 4.14 Signed-off-by: Hua Rui <huarui.dev@gmail.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
b2441318 |
|
01-Nov-2017 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
c1573137 |
|
30-Oct-2017 |
tang.junhui <tang.junhui@zte.com.cn> |
bcache: fix wrong cache_misses statistics Currently, Cache missed IOs are identified by s->cache_miss, but actually, there are many situations that missed IOs are not assigned a value for s->cache_miss in cached_dev_cache_miss(), for example, a bypassed IO (s->iop.bypass = 1), or the cache_bio allocate failed. In these situations, it will go to out_put or out_submit, and s->cache_miss is null, which leads bch_mark_cache_accounting() to treat this IO as a hit IO. [ML: applied by 3-way merge] Signed-off-by: tang.junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
d59b2379 |
|
30-Oct-2017 |
Coly Li <colyli@suse.de> |
bcache: only permit to recovery read error when cache device is clean When bcache does read I/Os, for example in writeback or writethrough mode, if a read request on cache device is failed, bcache will try to recovery the request by reading from cached device. If the data on cached device is not synced with cache device, then requester will get a stale data. For critical storage system like database, providing stale data from recovery may result an application level data corruption, which is unacceptible. With this patch, for a failed read request in writeback or writethrough mode, recovery a recoverable read request only happens when cache device is clean. That is to say, all data on cached device is up to update. For other cache modes in bcache, read request will never hit cached_dev_read_error(), they don't need this patch. Please note, because cache mode can be switched arbitrarily in run time, a writethrough mode might be switched from a writeback mode. Therefore checking dc->has_data in writethrough mode still makes sense. Changelog: V4: Fix parens error pointed by Michael Lyle. v3: By response from Kent Oversteet, he thinks recovering stale data is a bug to fix, and option to permit it is unnecessary. So this version the sysfs file is removed. v2: rename sysfs entry from allow_stale_data_on_failure to allow_stale_data_on_failure, and fix the confusing commit log. v1: initial patch posted. [small change to patch comment spelling by mlyle] Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Michael Lyle <mlyle@lyle.org> Reported-by: Arne Wolf <awolf@lenovo.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Nix <nix@esperi.org.uk> Cc: Kai Krakow <hurikhan77@gmail.com> Cc: Eric Wheeler <bcache@lists.ewheeler.net> Cc: Junhui Tang <tang.junhui@zte.com.cn> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
23850102 |
|
13-Oct-2017 |
Yijing Wang <wangyijing@huawei.com> |
bcache: remove unused parameter Parameter bio is no longer used, clean it. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
b41c9b02 |
|
13-Oct-2017 |
Eric Wheeler <bcache@linux.ewheeler.net> |
bcache: update bio->bi_opf bypass/writeback REQ_ flag hints Flag for bypass if the IO is for read-ahead or background, unless the read-ahead request is for metadata (eg, from gfs2). Bypass if: bio->bi_opf & (REQ_RAHEAD|REQ_BACKGROUND) && !(bio->bi_opf & REQ_META)) Writeback if: op_is_sync(bio->bi_opf) || bio->bi_opf & (REQ_META|REQ_PRIO) Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
69daf03a |
|
06-Sep-2017 |
Tang Junhui <tang.junhui@zte.com.cn> |
bcache: do not subtract sectors_to_gc for bypassed IO Since bypassed IOs use no bucket, so do not subtract sectors_to_gc to trigger gc thread. Signed-off-by: tang.junhui <tang.junhui@zte.com.cn> Acked-by: Coly Li <colyli@suse.de> Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
c81ffa32 |
|
06-Sep-2017 |
Tang Junhui <tang.junhui@zte.com.cn> |
bcache: fix sequential large write IO bypass Sequential write IOs were tested with bs=1M by FIO in writeback cache mode, these IOs were expected to be bypassed, but actually they did not. We debug the code, and find in check_should_bypass(): if (!congested && mode == CACHE_MODE_WRITEBACK && op_is_write(bio_op(bio)) && (bio->bi_opf & REQ_SYNC)) goto rescale that means, If in writeback mode, a write IO with REQ_SYNC flag will not be bypassed though it is a sequential large IO, It's not a correct thing to do actually, so this patch remove these codes. Signed-off-by: tang.junhui <tang.junhui@zte.com.cn> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
74d46992 |
|
23-Aug-2017 |
Christoph Hellwig <hch@lst.de> |
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
d62e26b3 |
|
30-Jun-2017 |
Jens Axboe <axboe@kernel.dk> |
block: pass in queue to inflight accounting No functional change in this patch, just in preparation for basing the inflight mechanism on the queue in question. Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
4e4cbee9 |
|
03-Jun-2017 |
Christoph Hellwig <hch@lst.de> |
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
dc3b17cc |
|
02-Feb-2017 |
Jan Kara <jack@suse.cz> |
block: Use pointer to backing_dev_info from request_queue We will want to have struct backing_dev_info allocated separately from struct request_queue. As the first step add pointer to backing_dev_info to request_queue and convert all users touching it. No functional changes in this patch. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
f73f44eb |
|
27-Jan-2017 |
Christoph Hellwig <hch@lst.de> |
block: add a op_is_flush helper This centralizes the checks for bios that needs to be go into the flush state machine. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
be628be0 |
|
26-Oct-2016 |
Kent Overstreet <kent.overstreet@gmail.com> |
bcache: Make gc wakeup sane, remove set_task_state() Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
#
3a83f467 |
|
22-Nov-2016 |
Ming Lei <tom.leiming@gmail.com> |
block: bio: pass bvec table to bio_init() Some drivers often use external bvec table, so introduce this helper for this case. It is always safe to access the bio->bi_io_vec in this way for this case. After converting to this usage, it will becomes a bit easier to evaluate the remaining direct access to bio->bi_io_vec, so it can help to prepare for the following multipage bvec support. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Fixed up the new O_DIRECT cases. Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
70fd7614 |
|
01-Nov-2016 |
Christoph Hellwig <hch@lst.de> |
block,fs: use REQ_* flags directly Remove the WRITE_* and READ_SYNC wrappers, and just use the flags directly. Where applicable this also drops usage of the bio_set_op_attrs wrapper. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
83b5df67 |
|
01-Nov-2016 |
Christoph Hellwig <hch@lst.de> |
bcache: use op_is_sync to check for synchronous requests (and remove one layer of masking for the op_is_write call next to it). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
491221f8 |
|
22-Sep-2016 |
Guoqing Jiang <gqjiang@suse.com> |
block: export bio_free_pages to other modules bio_free_pages is introduced in commit 1dfa0f68c040 ("block: add a helper to free bio bounce buffer pages"), we can reuse the func in other modules after it was imported. Cc: Christoph Hellwig <hch@infradead.org> Cc: Jens Axboe <axboe@fb.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Shaohua Li <shli@fb.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Acked-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
1eff9d32 |
|
05-Aug-2016 |
Jens Axboe <axboe@fb.com> |
block: rename bio bi_rw to bi_opf Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
28a8f0d3 |
|
05-Jun-2016 |
Mike Christie <mchristi@redhat.com> |
block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSH To avoid confusion between REQ_OP_FLUSH, which is handled by request_fn drivers, and upper layers requesting the block layer perform a flush sequence along with possibly a WRITE, this patch renames REQ_FLUSH to REQ_PREFLUSH. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
ad0d9e76 |
|
05-Jun-2016 |
Mike Christie <mchristi@redhat.com> |
bcache: use bio op accessors Separate the op from the rq_flag_bits and have bcache set/get the bio using bio_set_op_attrs/bio_op. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
c8d93247 |
|
05-Jun-2016 |
Mike Christie <mchristi@redhat.com> |
bcache: use op_is_write instead of checking for REQ_WRITE We currently set REQ_WRITE/WRITE for all non READ IOs like discard, flush, writesame, etc. In the next patches where we no longer set up the op as a bitmap, we will not be able to detect a operation direction like writesame by testing if REQ_WRITE is set. This has bcache use the op_is_write helper which will do the right thing. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
dece1635 |
|
05-Nov-2015 |
Jens Axboe <axboe@fb.com> |
block: change ->make_request_fn() and users to return a queue cookie No functional changes in this patch, but it prepares us for returning a more useful cookie related to the IO that was queued up. Signed-off-by: Jens Axboe <axboe@fb.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com>
|
#
749b61da |
|
24-Nov-2013 |
Kent Overstreet <kent.overstreet@gmail.com> |
bcache: remove driver private bio splitting code The bcache driver has always accepted arbitrarily large bios and split them internally. Now that every driver must accept arbitrarily large bios this code isn't nessecary anymore. Cc: linux-bcache@vger.kernel.org Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> [dpark: add more description in commit message] Signed-off-by: Dongsu Park <dpark@posteo.net> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
4246a0b6 |
|
20-Jul-2015 |
Christoph Hellwig <hch@lst.de> |
block: add a bi_error field to struct bio Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
77b5a084 |
|
06-Mar-2015 |
Jens Axboe <axboe@fb.com> |
bcache: don't embed 'return' statements in closure macros This is horribly confusing, it breaks the flow of the code without it being apparent in the caller. Signed-off-by: Jens Axboe <axboe@fb.com> Acked-by: Christoph Hellwig <hch@lst.de>
|
#
66114cad |
|
22-May-2015 |
Tejun Heo <tj@kernel.org> |
writeback: separate out include/linux/backing-dev-defs.h With the planned cgroup writeback support, backing-dev related declarations will be more widely used across block and cgroup; unfortunately, including backing-dev.h from include/linux/blkdev.h makes cyclic include dependency quite likely. This patch separates out backing-dev-defs.h which only has the essential definitions and updates blkdev.h to include it. c files which need access to more backing-dev details now include backing-dev.h directly. This takes backing-dev.h off the common include dependency chain making it a lot easier to use it across block and cgroup. v2: fs/fat build failure fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
dac56212 |
|
17-Apr-2015 |
Jens Axboe <axboe@fb.com> |
bio: skip atomic inc/dec of ->bi_cnt for most use cases Struct bio has a reference count that controls when it can be freed. Most uses cases is allocating the bio, which then returns with a single reference to it, doing IO, and then dropping that single reference. We can remove this atomic_dec_and_test() in the completion path, if nobody else is holding a reference to the bio. If someone does call bio_get() on the bio, then we flag the bio as now having valid count and that we must properly honor the reference count when it's being put. Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
aae4933d |
|
23-Nov-2014 |
Gu Zheng <guz.fnst@cn.fujitsu.com> |
md/bcache: use generic io stats accounting functions to simplify io stat accounting Use generic io stats accounting help functions (generic_{start,end}_io_acct) to simplify io stat accounting. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Acked-by: Kent Overstreet <kmo@datera.io> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
60ae81ee |
|
22-May-2014 |
Slava Pestov <sp@daterainc.com> |
bcache: bcache_write tracepoint was crashing Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
3f5e0a34 |
|
23-Jan-2014 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Kill dead cgroup code This hasn't been used or even enabled in ages. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
da415a09 |
|
09-Jan-2014 |
Nicholas Swenson <nks@daterainc.com> |
bcache: Fix moving_gc deadlocking with a foreground write Deadlock happened because a foreground write slept, waiting for a bucket to be allocated. Normally the gc would mark buckets available for invalidation. But the moving_gc was stuck waiting for outstanding writes to complete. These writes used the bcache_wq, the same queue foreground writes used. This fix gives moving_gc its own work queue, so it was still finish moving even if foreground writes are stuck waiting for allocation. It also makes work queue a parameter to the data_insert path, so moving_gc can use its workqueue for writes. Signed-off-by: Nicholas Swenson <nks@daterainc.com> Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
1b4eaf3d |
|
16-Jan-2014 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Fix flash_dev_cache_miss() for real this time The code was using sectors to count the number of sectors it was zeroing... but then it passed it to bio_advance()... after it had been set to 0. Amusing... Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
e3b4825b |
|
12-Dec-2013 |
Nicholas Swenson <nks@daterainc.com> |
bcache: bugfix - gc thread now gets woken when cache is full Signed-off-by: Nicholas Swenson <nks@daterainc.com>
|
#
b3ff8a2f |
|
12-Jan-2014 |
Hugh Dickins <hughd@google.com> |
cgroup: remove stray references to css_id Trivial: remove the few stray references to css_id, which itself was removed in v3.13's 2ff2a7d03bbe "cgroup: kill css_id". Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Tejun Heo <tj@kernel.org>
|
#
085d2a3d |
|
11-Nov-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Make bch_keylist_realloc() take u64s, not nptrs Getting away from KEY_PTRS and moving toward KEY_U64s - and getting rid of magic 2s Also - split out the part that checks against journal entry size so as to avoid a dependancy on struct cache_set in bset.c Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
a5ae4300 |
|
10-Sep-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Zero less memory Another minor performance optimization Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
d56d000a |
|
09-Aug-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Don't touch bucket gen for dirty ptrs Unnecessary since a bucket that has dirty pointers pointing to it can never be invalidated - and skipping it is a measurable performance boost, since the bucket gen will usually be a cache miss. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
20d0189b |
|
23-Nov-2013 |
Kent Overstreet <kmo@daterainc.com> |
block: Introduce new bio_split() The new bio_split() can split arbitrary bios - it's not restricted to single page bios, like the old bio_split() (previously renamed to bio_pair_split()). It also has different semantics - it doesn't allocate a struct bio_pair, leaving it up to the caller to handle completions. Then convert the existing bio_pair_split() users to the new bio_split() - and also nvme, which was open coding bio splitting. (We have to take that BUG_ON() out of bio_integrity_trim() because this bio_split() needs to use it, and there's no reason it has to be used on bios marked as cloned; BIO_CLONED doesn't seem to have clearly documented semantics anyways.) Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Neil Brown <neilb@suse.de>
|
#
59d276fe |
|
23-Nov-2013 |
Kent Overstreet <kmo@daterainc.com> |
block: Add bio_clone_fast() bio_clone() just got more expensive - however, most users of bio_clone() don't actually need to modify the biovec. If they aren't modifying the biovec, and they can guarantee that the original bio isn't freed before the clone (also true in most cases), we can just point the clone at the original bio's biovec. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
7988613b |
|
23-Nov-2013 |
Kent Overstreet <kmo@daterainc.com> |
block: Convert bio_for_each_segment() to bvec_iter More prep work for immutable biovecs - with immutable bvecs drivers won't be able to use the biovec directly, they'll need to use helpers that take into account bio->bi_iter.bi_bvec_done. This updates callers for the new usage without changing the implementation yet. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jim Paris <jim@jtan.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: support@lsi.com Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Cc: linux-m68k@lists.linux-m68k.org Cc: linuxppc-dev@lists.ozlabs.org Cc: drbd-user@lists.linbit.com Cc: nbd-general@lists.sourceforge.net Cc: cbe-oss-dev@lists.ozlabs.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: DL-MPTFusionLinux@lsi.com Cc: linux-scsi@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: linux-fsdevel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: linux-mm@kvack.org Acked-by: Geoff Levand <geoff@infradead.org>
|
#
4f024f37 |
|
11-Oct-2013 |
Kent Overstreet <kmo@daterainc.com> |
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
|
#
ed9c47be |
|
22-Nov-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Kill unaligned bvec hack Bcache has a hack to avoid cloning the biovec if it's all full pages - but with immutable biovecs coming this won't be necessary anymore. For now, we remove the special case and always clone the bvec array so that the immutable biovec patches are simpler. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
5ceaaad7 |
|
10-Sep-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Bypass torture test More testing ftw! Also, now verify mode doesn't break if you read dirty data. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
c4d951dd |
|
21-Aug-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Fix sysfs splat on shutdown with flash only devs Whoops. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
8aee1220 |
|
30-Jul-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Kill sequential_merge option It never really made sense to expose this, so just kill it. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
81ab4190 |
|
31-Oct-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Pull on disk data structures out into a separate header Now, the on disk data structures are in a header that can be exported to userspace - and having them all centralized is nice too. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
2599b53b |
|
24-Jul-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Move sector allocator to alloc.c Just reorganizing things a bit. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
220bb38c |
|
10-Sep-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Break up struct search With all the recent refactoring around struct btree op struct search has gotten rather large. But we can now easily break it up in a different way - we break out struct btree_insert_op which is for inserting data into the cache, and that's now what the copying gc code uses - struct search is now specific to request.c Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
cc7b8819 |
|
24-Jul-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Convert bch_btree_insert() to bch_btree_map_leaf_nodes() Last of the btree_map() conversions. Main visible effect is bch_btree_insert() is no longer taking a struct btree_op as an argument anymore - there's no fancy state machine stuff going on, it's just a normal function. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
6054c6d4 |
|
24-Jul-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Don't use op->insert_collision When we convert bch_btree_insert() to bch_btree_map_leaf_nodes(), we won't be passing struct btree_op to bch_btree_insert() anymore - so we need a different way of returning whether there was a collision (really, a replace collision). Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
1b207d80 |
|
10-Sep-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Kill op->replace This is prep work for converting bch_btree_insert to bch_btree_map_leaf_nodes() - we have to convert all its arguments to actual arguments. Bunch of churn, but should be straightforward. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
b54d6934 |
|
24-Jul-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Kill op->cl This isn't used for waiting asynchronously anymore - so this is a fairly trivial refactoring. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
c18536a7 |
|
24-Jul-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Prune struct btree_op Eventual goal is for struct btree_op to contain only what is necessary for traversing the btree. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
cc231966 |
|
24-Jul-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Clean up cache_lookup_fn There was some looping in submit_partial_cache_hit() and submit_partial_cache_hit() that isn't needed anymore - originally, we wouldn't necessarily process the full hit or miss all at once because when splitting the bio, we took into account the restrictions of the device we were sending it to. But, device bio size restrictions are now handled elsewhere, with a wrapper around generic_make_request() - so that looping has been unnecessary for awhile now and we can now do quite a bit of cleanup. And if we trim the key we're reading from to match the subset we're actually reading, we don't have to explicitly calculate bi_sector anymore. Neat. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
2c1953e2 |
|
24-Jul-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Convert bch_btree_read_async() to bch_btree_map_keys() This is a fairly straightforward conversion, mostly reshuffling - op->lookup_done goes away, replaced by MAP_DONE/MAP_CONTINUE. And the code for handling cache hits and misses wasn't really btree code, so it gets moved to request.c. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
df8e8970 |
|
24-Jul-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Move some stuff to btree.c With the new btree_map() functions, we don't need to export the stuff needed for traversing the btree anymore. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
72a44517 |
|
24-Oct-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Convert gc to a kthread We needed a dedicated rescuer workqueue for gc anyways... and gc was conceptually a dedicated thread, just one that wasn't running all the time. Switch it to a dedicated thread to make the code a bit more straightforward. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
35fcd848 |
|
24-Jul-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Convert bucket_wait to wait_queue_head_t At one point we did do fancy asynchronous waiting stuff with bucket_wait, but that's all gone (and bucket_wait is used a lot less than it used to be). So use the standard primitives. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
0b93207a |
|
24-Jul-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Move keylist out of btree_op Slowly working on pruning struct btree_op - the aim is for it to only contain things that are actually necessary for traversing the btree. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
a34a8bfd |
|
24-Oct-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Refactor journalling flow control Making things less asynchronous that don't need to be - bch_journal() only has to block when the journal or journal entry is full, which is emphatically not a fast path. So make it a normal function that just returns when it finishes, to make the code and control flow easier to follow. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
cdd972b1 |
|
10-Sep-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Refactor read request code a bit More refactoring, and renaming. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
84f0db03 |
|
24-Jul-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Refactor request_write() Try to improve some of the naming a bit to be more consistent, and also improve the flow of control in request_write() a bit. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
c2f95ae2 |
|
24-Jul-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Clean up keylist code More random refactoring. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
4f3d4014 |
|
10-Sep-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Add explicit keylist arg to btree_insert() Some refactoring - better to explicitly pass stuff around instead of having it all in the "big bag of state", struct btree_op. Going to prune struct btree_op quite a bit over time. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
e7c590eb |
|
10-Sep-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Convert btree_insert_check_key() to btree_insert_node() This was the main point of all this refactoring - now, btree_insert_check_key() won't fail just because the leaf node happened to be full. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
#
d4eddd42 |
|
22-Oct-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Fixed incorrect order of arguments to bio_alloc_bioset() Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: linux-stable <stable@vger.kernel.org> # >= v3.10 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
2fe80d3b |
|
10-Oct-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Fix a null ptr deref regression Commit c0f04d88e46d ("bcache: Fix flushes in writeback mode") was fixing a reported data corruption bug, but it seems some last minute refactoring or rebasing introduced a null pointer deref. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: linux-stable <stable@vger.kernel.org> # >= v3.10 Reported-by: Gabriel de Perthuis <g2p.code@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
c0f04d88 |
|
24-Sep-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Fix flushes in writeback mode In writeback mode, when we get a cache flush we need to make sure we issue a flush to the backing device. The code for sending down an extra flush was wrong - by cloning the bio we were probably getting flags that didn't make sense for a bare flush, and also the old code was firing for FUA bios, for which we don't need to send a flush to the backing device. This was causing data corruption somehow - the mechanism was never determined, but this patch fixes it for the users that were seeing it. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: linux-stable <stable@vger.kernel.org> # >= v3.10 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
54d12f2b |
|
10-Jul-2013 |
Kent Overstreet <kmo@daterainc.com> |
bcache: Advertise that flushes are supported Whoops - bcache's flush/FUA was mostly correct, but flushes get filtered out unless we say we support them... Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: linux-stable <stable@vger.kernel.org> # >= v3.10
|
#
8e51e414 |
|
06-Jun-2013 |
Kent Overstreet <koverstreet@google.com> |
bcache: Use standard utility code Some of bcache's utility code has made it into the rest of the kernel, so drop the bcache versions. Bcache used to have a workaround for allocating from a bio set under generic_make_request() (if you allocated more than once, the bios you already allocated would get stuck on current->bio_list when you submitted, and you'd risk deadlock) - bcache would mask out __GFP_WAIT when allocating bios under generic_make_request() so that allocation could fail and it could retry from workqueue. But bio_alloc_bioset() has a workaround now, so we can drop this hack and the associated error handling. Signed-off-by: Kent Overstreet <koverstreet@google.com>
|
#
e49c7c37 |
|
26-Jun-2013 |
Kent Overstreet <koverstreet@google.com> |
bcache: FUA fixes Journal writes need to be marked FUA, not just REQ_FLUSH. And btree node writes have... weird ordering requirements. Signed-off-by: Kent Overstreet <koverstreet@google.com>
|
#
72c27061 |
|
05-Jun-2013 |
Kent Overstreet <koverstreet@google.com> |
bcache: Write out full stripes Now that we're tracking dirty data per stripe, we can add two optimizations for raid5/6: * If a stripe is already dirty, force writes to that stripe to writeback mode - to help build up full stripes of dirty data * When flushing dirty data, preferentially write out full stripes first if there are any. Signed-off-by: Kent Overstreet <koverstreet@google.com>
|
#
279afbad |
|
05-Jun-2013 |
Kent Overstreet <koverstreet@google.com> |
bcache: Track dirty data by stripe To make background writeback aware of raid5/6 stripes, we first need to track the amount of dirty data within each stripe - we do this by breaking up the existing sectors_dirty into per stripe atomic_ts Signed-off-by: Kent Overstreet <koverstreet@google.com>
|
#
c37511b8 |
|
26-Apr-2013 |
Kent Overstreet <koverstreet@google.com> |
bcache: Fix/revamp tracepoints The tracepoints were reworked to be more sensible, and fixed a null pointer deref in one of the tracepoints. Converted some of the pr_debug()s to tracepoints - this is partly a performance optimization; it used to be that with DEBUG or CONFIG_DYNAMIC_DEBUG pr_debug() was an empty macro; but at some point it was changed to an empty inline function. Some of the pr_debug() statements had rather expensive function calls as part of the arguments, so this code was getting run unnecessarily even on non debug kernels - in some fast paths, too. Signed-off-by: Kent Overstreet <koverstreet@google.com>
|
#
2903381f |
|
11-Apr-2013 |
Kent Overstreet <koverstreet@google.com> |
bcache: Take data offset from the bdev superblock. Add a new superblock version, and consolidate related defines. Signed-off-by: Gabriel de Perthuis <g2p.code+bcache@gmail.com> Signed-off-by: Kent Overstreet <koverstreet@google.com>
|
#
169ef1cf |
|
28-Mar-2013 |
Kent Overstreet <koverstreet@google.com> |
bcache: Don't export utility code, prefix with bch_ Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: linux-bcache@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
b1a67b0f |
|
25-Mar-2013 |
Kent Overstreet <koverstreet@google.com> |
bcache: Style/checkpatch fixes Took out some nested functions, and fixed some more checkpatch complaints. Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: linux-bcache@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
cafe5635 |
|
23-Mar-2013 |
Kent Overstreet <koverstreet@google.com> |
bcache: A block layer cache Does writethrough and writeback caching, handles unclean shutdown, and has a bunch of other nifty features motivated by real world usage. See the wiki at http://bcache.evilpiepirate.org for more. Signed-off-by: Kent Overstreet <koverstreet@google.com>
|