leds: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230517180559.166329-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Lee Jones <lee@kernel.org>

leds: lm3532: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-273-uwe@kleine-koenig.org

i2c: Make remove callback return void

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

leds: lm3532: Make error handling more robust

It's easy to miss necessary clean up, e.g. firmware node reference counting,
during error path in ->probe(). Make it more robust by moving to a single
point of return.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

leds: lm3532: Fix warnings for undefined parameters

Fix warnings for undefined parameters when W=1 is used.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

leds: parse linux,default-trigger DT property in LED core

Do the parsing of `linux,default-trigger` DT property to LED core.
Currently it is done in many different drivers and the code is repeated.

This patch removes the parsing from 23 drivers:
an30259a, aw2013, bcm6328, bcm6358, cr0014114, el15203000, gpio,
is31fl32xx, lm3532, lm36274, lm3692x, lm3697, lp50xx, lp8860, lt3593,
max77650, mt6323, ns2, pm8058, pwm, syscon, tlc591xx and turris-omnia.

There is one driver in drivers/input which parses this property on it's
own. I shall send a separate patch there after this is applied.

There are still 8 drivers that parse this property on their own because
they do not pass the led_init_data structure to the registering
function. I will try to refactor those in the future.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

leds: lm3532: don't parse label DT property

This driver uses extended LED registration, so we do not need to parse
the `label` DT property on our own.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

leds: Replace HTTP links with HTTPS ones

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

leds: lm3532: make bitfield 'enabled' unsigned

The bitfield 'enabled' should bit unsigned, so make it unsigned.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

leds: lm3532: add pointer to documentation and fix typo

Add pointer to datasheet and fix typo in printk message.

Signed-off-by: Pavel Machek <pavel@ucw.cz>

leds: lm3532: add pointer to documentation and fix typo

Add pointer to datasheet and fix typo in printk message.

Signed-off-by: Pavel Machek <pavel@ucw.cz>

leds: lm3532: use extended registration so that LED can be used for backlight

Signed-off-by: Pavel Machek <pavel@ucw.cz>

leds: lm3532: Fix optional led-max-microamp prop error handling

Fix the error handling for the led-max-microamp property.
Need to check if the property is present and then if it is
retrieve the setting and its max boundary

Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

leds: lm3532: Move static keyword to the front of declarations

Move the static keyword to the front of declarations ramp_table,
als_avrg_table and als_imp_table, and resolve the following
compiler warnings that can be seen when building with warnings
enabled (W=1):

drivers/leds/leds-lm3532.c:209:1: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]

drivers/leds/leds-lm3532.c:266:1: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]

drivers/leds/leds-lm3532.c:281:1: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]

Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

leds: lm3532: Avoid potentially unpaired regulator calls

We may currently get unpaired regulator calls when configuring the LED
brightness via sysfs in case of regulator calls producing errors. Let's
fix this by maintaining local state for enabled.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

leds: lm3532: Add full scale current configuration

Allow the full scale current to be configured at init.
Valid rangles are 5mA->29.8mA.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

leds: lm3532: Fixes for the driver for stability

Fixed misspelled words, added error check during probe
on the init of the registers, and fixed ALS/I2C control
mode.

Fixes: bc1b8492c764 ("leds: lm3532: Introduce the lm3532 LED driver")
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

leds: lm3532: Change the define for the fs current register

Change the define name of the full scale current registers.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

leds: lm3532: Fix brightness control for i2c mode

Fix the brightness control for I2C mode. Instead of
changing the full scale current register update the ALS target
register for the appropriate banks.

In addition clean up some code errors and random misspellings found
during coding.

Tested on Droid4 as well as LM3532 EVM connected to a BeagleBoneBlack

Fixes: bc1b8492c764 ("leds: lm3532: Introduce the lm3532 LED driver")
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

leds: lm3532: Switch to use fwnode_property_count_uXX()

Use fwnode_property_count_uXX() directly, that makes code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

leds: lm3532: Introduce the lm3532 LED driver

Introduce the Texas Instruments LM3532 White LED driver.
The driver supports ALS configurability or manual brightness
control.

The driver also supports associating LED strings with specific
control banks in a group or as individually controlled strings.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>