irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry

Since d4a45c68dc81 ("irqdomain: Protect the linear revmap with RCU"),
any irqdomain lookup requires the RCU read lock to be held.

This assumes that the architecture code will be structured such as
irq_enter() will be called *before* the interrupt is looked up
in the irq domain. However, this isn't the case for MIPS, and a number
of drivers are structured to do it the other way around when handling
an interrupt in their root irqchip (secondary irqchips are OK by
construction).

This results in a RCU splat on a lockdep-enabled kernel when the kernel
takes an interrupt from idle, as reported by Guenter Roeck.

Note that this could have fired previously if any driver had used
tree-based irqdomain, which always had the RCU requirement.

To solve this, provide a MIPS-specific helper (do_domain_IRQ())
as the pendent of do_IRQ() that will do thing in the right order
(and maybe save some cycles in the process).

Ideally, MIPS would be moved over to using handle_domain_irq(),
but that's much more ambitious.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
[maz: add dependency on CONFIG_IRQ_DOMAIN after report from the kernelci bot]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20210705172352.GA56304@roeck-us.net
Link: https://lore.kernel.org/r/20210706110647.3979002-1-maz@kernel.org

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/irq-pic32-evic: Fix bug with external interrupts.

The wrong external interrupt bits are being set, offset by 1.

Signed-off-by: Joshua Henderson <digitalpeer@digitalpeer.com>
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

IRQCHIP: irq-pic32-evic: Add support for PIC32 interrupt controller

This adds support for the interrupt controller present on PIC32 class
devices. It handles all internal and external interrupts. This controller
exists outside of the CPU core and is the arbitrator of all interrupts
(including interrupts from the CPU itself) before they are presented to
the CPU.

The following features are supported:
- DT properties for EVIC and for devices/peripherals that use interrupt lines
- Persistent and non-persistent interrupt handling
- irqdomain and generic chip support
- Configuration of external interrupt edge polarity

Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12092/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>