irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag

LIOINTC doesn't require specific logic to work with wakeup IRQs,
and no irq_set_wake callback is needed. To allow registered IRQs
from LIOINTC to be used as a wakeup-source, and ensure irq_set_irq_wake()
works well, the flag IRQCHIP_SKIP_SET_WAKE should be added.

Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-5-lvjianmin@loongson.cn

irqchip/loongson-liointc: Fix IRQ trigger polarity

For the INT_POLARITY register of Loongson-2K series IRQ
controller, '0' indicates high level or rising edge triggered,
'1' indicates low level or falling edge triggered, and we
can find out the information from the Loongson 2K1000LA User
Manual v1.0, Table 9-2, Section 9.3 (中断寄存器描述 / Description
of the Interrupt Registers).

For Loongson-3 CPU series, setting INT_POLARITY register is not
supported and writting it has no effect.

So trigger polarity setting shouled be fixed for Loongson-2K CPU
series.

Fixes: 17343d0b4039 ("irqchip/loongson-liointc: Support to set IRQ type for ACPI path")
Cc: stable@vger.kernel.org
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Co-developed-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-4-lvjianmin@loongson.cn

irqchip/loongson-liointc: Save/restore int_edge/int_pol registers during S3/S4

If int_edge/int_pol registers are configured to not be the default values, we
should save/restore them during S3/S4.

Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221207140643.1600743-1-chenhuacai@loongson.cn

irqchip/loongson-liointc: Fix improper error handling in liointc_init()

For cores less than 4, eg, loongson2k1000 with 2 cores, the
of_property_match_string() may return with an error value,
which causes that liointc could not work. At least isr0 is
what should be checked like previous commit b2c4c3969fd7
("irqchip/loongson-liointc: irqchip add 2.0 version") did.

Fixes: 0858ed035a85 ("irqchip/loongson-liointc: Add ACPI init support")
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221104110712.23300-1-liupeibao@loongson.cn

irqchip/loongson-htvec: Add ACPI init support

HTVECINTC stands for "HyperTransport Interrupts" that described in
Section 14.3 of "Loongson 3A5000 Processor Reference Manual". For more
information please refer Documentation/loongarch/irq-chip-model.rst.

Though the extended model is the recommended one, there are still some
legacy model machines. So we add ACPI init support for HTVECINTC.

Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020142535.1725573-1-chenhuacai@loongson.cn

irqchip/loongson-liointc: Support to set IRQ type for ACPI path

For ACPI path, the xlate callback used IRQ_TYPE_NONE and ignored
the IRQ type in intspec[1]. For supporting to set type for
IRQs of the irqdomain, intspec[1] should be used to get IRQ
type.

Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221022075955.11726-5-lvjianmin@loongson.cn

irqchip/loongson-liointc: Fix an error handling path in liointc_init()

All errors lead to the error handling path, except the one dealing
with "reg-names" in DT.

Fix it and release some resources before returning if this test fails.

Fixes: 0858ed035a85 ("irqchip/loongson-liointc: Add ACPI init support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[maz: fix commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1a6d74ab70712279023aa7bdbd31bd3aec103bc0.1659382063.git.christophe.jaillet@wanadoo.fr

irqchip/loongarch: Fix irq_domain_alloc_fwnode() abuse

The recently merged LoongArch drivers paper over the lack of
topology information by creating a bunch of fwnodes for the
irqchips. So far, so good.

However, irq_domain_alloc_fwnode() is supposed to take a PA, and
not a kernel VA blindly cast as a PA, potentially disclosing
kernel VAs to userspace. In some other cases, even NULL is used
as the PA, which is entertaining.

Fix this by using the actual PA of the block when available,
and switch to a named fwnode in the other cases.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Jianmin Lv <lvjianmin@loongson.cn>
Link: https://lore.kernel.org/r/20220808105020.2689757-1-maz@kernel.org

irqchip/loongson-liointc: Add ACPI init support

LIOINTC stands for "Legacy I/O Interrupts" that described in Section
11.1 of "Loongson 3A5000 Processor Reference Manual". For more
information please refer Documentation/loongarch/irq-chip-model.rst.

Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1658314292-35346-11-git-send-email-lvjianmin@loongson.cn

irqchip/loongson-liointc: Use architecture register to get coreid

fa84f89395e0 ("irqchip/loongson-liointc: Fix build error for
LoongArch") replaced get_ebase_cpunum with physical processor
id from SMP facilities. However that breaks MIPS non-SMP build
and makes booting from other cores inpossible on non-SMP kernel.

Thus we revert get_ebase_cpunum back and use get_csr_cpuid for
LoongArch.

Fixes: fa84f89395e0 ("irqchip/loongson-liointc: Fix build error for LoongArch")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220609175242.977-1-jiaxun.yang@flygoat.com

irqchip/loongson-liointc: Fix build error for LoongArch

liointc driver is shared by MIPS and LoongArch, this patch adjust the
code to fix build error for LoongArch.

Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

irqchip: Bulk conversion to generic_handle_domain_irq()

Wherever possible, replace constructs that match either
generic_handle_irq(irq_find_mapping()) or
generic_handle_irq(irq_linear_revmap()) to a single call to
generic_handle_domain_irq().

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

irqchip/loongson-liointc: irqchip add 2.0 version

Add IO interrupt controller support for Loongson-2K1000, different
from the Loongson-3A series is that Loongson-2K1000 has 64 interrupt
sources, 0-31 correspond to the device tree liointc0 device node, and
the other correspond to liointc1 node.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Tested-by: Ming Wang <wangming01@loongson.cn>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

MIPS: Loongson64: Move loongson_system_configuration to loongson.h

The purpose of separating loongson_system_configuration from boot_param.h
is to keep the other structure consistent with the firmware.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

irqchip/loongson-liointc: Fix build warnings

Fix build warnings as below:

>> drivers/irqchip/irq-loongson-liointc.c:134:12: warning: no previous prototype for 'liointc_of_init' [-Wmissing-prototypes]
134 | int __init liointc_of_init(struct device_node *node,
| ^~~~~~~~~~~~~~~

Fixes: dbb152267908c4b2c3639492a94 ("irqchip: Add driver for Loongson I/O Local Interrupt Controller")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210105025651.772024-1-chenhuacai@loongson.cn

irqchip/loongson-liointc: Fix misuse of gc->mask_cache

In gc->mask_cache bits, 1 means enabled and 0 means disabled, but in the
loongson-liointc driver mask_cache is misused by reverting its meaning.
This patch fix the bug and update the comments as well.

Fixes: dbb152267908c4b2c3639492a ("irqchip: Add driver for Loongson I/O Local Interrupt Controller")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1596099090-23516-4-git-send-email-chenhc@lemote.com

irqchip/loongson-liointc: Fix potential dead lock

In the function liointc_set_type(), we need to call the function
irq_gc_unlock_irqrestore() before returning.

Fixes: dbb152267908 ("irqchip: Add driver for Loongson I/O Local Interrupt Controller")
Reported-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1594087972-21715-8-git-send-email-yangtiezhu@loongson.cn

irqchip: loongson-liointc: Workaround LPC IRQ Errata

The 1.0 version of that controller has a bug that status bit
of LPC IRQ sometimes doesn't get set correctly.

So we can always blame LPC IRQ when spurious interrupt happens
at the parent interrupt line which LPC IRQ supposed to route
to.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Co-developed-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

irqchip: Add driver for Loongson I/O Local Interrupt Controller

This controller appeared on Loongson family of chips as the primary
package interrupt source.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Co-developed-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>