#
d8bde56d |
|
17-May-2023 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
Input: Switch i2c drivers back to use .probe() After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230517164645.162294-1-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
#
40be0646 |
|
14-Jan-2023 |
Jonathan Cameron <Jonathan.Cameron@huawei.com> |
Input: adxl34x - unify dev_pm_ops using EXPORT_SIMPLE_DEV_PM_OPS() The I2C and SPI PM callbacks were identical (though wrapped in some bouncing out to the bus specific container of the struct device and then back again to get the drvdata). As such rather than just moving these to SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() take the opportunity to unify the struct dev_pm_ops and use the new EXPORT_SIMPLE_DEV_PM_OPS() macro so that we can drop the unused suspend and resume callbacks as well as the structure if !CONFIG_PM_SLEEP without needing to mark the callbacks __maybe_unused. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20230114171620.42891-9-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
#
e186e84e |
|
18-Nov-2022 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
Input: adxl34x-i2c - Convert to i2c's .probe_new() The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-208-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
#
ed5c2f5f |
|
15-Aug-2022 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
#
af98ff04 |
|
12-Oct-2021 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
Input: adxl34x - make adxl34x_remove() return void Up to now adxl34x_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211012153945.2651412-6-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
#
80503b23 |
|
23-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 149 Based on 1 normalized pattern(s): licensed under the gpl 2 or later extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 82 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190524100845.150836982@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
01427fe7 |
|
03-Jan-2017 |
Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
Input: adxl34x - make it enumerable in ACPI environment The ACPI-enabled platform may contain _DSD method to enable this driver using compatible string. Remove OF specifics to re-use existing code on ACPI-enabled platforms. Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
#
800e3b9a |
|
17-Jul-2015 |
Krzysztof Kozlowski <krzk@kernel.org> |
Input: drop owner assignment from i2c_driver i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
#
3a38958d |
|
21-May-2015 |
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> |
Input: adxl34x - add OF match support The I2C subsystem can match devices without explicit OF support based on the part of their compatible property after the comma. However, this mechanism uses the first compatible value only. For adxl34x OF device nodes the compatible property will contain the more specific "adi,adxl345" or "adi,adxl346" value first. This prevents the device node from being matched with the adxl34x driver. Fix this by adding an OF match table with an "adi,adxl345" compatible entry. There's no need to add the "adi,adxl346" entry as the ADXL346 is backward-compatible with the ADXL345 with differences handled by runtime detection of the device model. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
#
97a652a8 |
|
02-Nov-2014 |
Jingoo Han <jg1.han@samsung.com> |
Input: misc - use __maybe_unused instead of ifdef around suspend/resume Use __maybe_unused instead of ifdef guards around suspend/resume functions, in order to increase build coverage and fix build warnings. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
#
2b1c0d50 |
|
26-Mar-2013 |
Jingoo Han <jg1.han@samsung.com> |
Input: adxl34x - add CONFIG_PM_SLEEP to suspend/resume functions Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/input/misc/adxl34x-spi.c:98:12: warning: 'adxl34x_spi_suspend' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-spi.c:108:12: warning: 'adxl34x_spi_resume' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-i2c.c:109:12: warning: 'adxl34x_i2c_suspend' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-i2c.c:119:12: warning: 'adxl34x_i2c_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
#
e2619cf7 |
|
23-Nov-2012 |
Bill Pemberton <wfp5p@virginia.edu> |
Input: remove use of __devexit CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
#
5298cc4c |
|
23-Nov-2012 |
Bill Pemberton <wfp5p@virginia.edu> |
Input: remove use of __devinit CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
#
1cb0aa88 |
|
23-Nov-2012 |
Bill Pemberton <wfp5p@virginia.edu> |
Input: remove use of __devexit_p CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
#
1b92c1cf |
|
17-Mar-2012 |
Axel Lin <axel.lin@gmail.com> |
Input: convert I2C drivers to use module_i2c_driver() This patch converts the drivers in drivers/input/* to use the module_i2c_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
|
#
fbb89935 |
|
11-Feb-2011 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
Input: adxl34x-i2c - convert to dev_pm_ops There is a general move to convert drivers to use dev_pm_ops rather than bus specific ones in order to facilitate core development. Do this conversion for adxl34x-i2c. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
|
#
af6e1d99 |
|
01-Jul-2010 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Input: adxl34 - make enable/disable separate from suspend/resume Suspending and resuming the device should be separate from enabling and disabling it through sysfs attribute and thus should not alter ac->disabled flag. [michael.hennerich@analog.com: various fixups] Tested-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
|
#
e27c7292 |
|
25-Jun-2010 |
Michael Hennerich <michael.hennerich@analog.com> |
Input: add driver for ADXL345/346 Digital Accelerometers This is a driver for the ADXL345/346 Three-Axis Digital Accelerometers. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Chris Verges <chrisv@cyberswitching.com> Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
|