RDMA/rxe: Fix comments about removed tasklets

The commit 9b4b7c1f9f54 ("RDMA/rxe: Add workqueue support for rxe tasks")
removed tasklets and replaced them with a workqueue, but relevant comments
are still remaining in the source code.

Fixes: 9b4b7c1f9f54 ("RDMA/rxe: Add workqueue support for rxe tasks")
Link: https://lore.kernel.org/r/20230518070027.942715-1-matsuda-daisuke@fujitsu.com
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Prevent faulty rkey generation

If you create MRs more than 0x10000 times after loading the module,
responder starts to reply NAKs for RDMA/Atomic operations because of rkey
violation detected in check_rkey(). The root cause is that rkeys are
incremented each time a new MR is created and the value overflows into the
range reserved for MWs.

This commit also increases the value of RXE_MAX_MW that has been limited
unlike other parameters.

Fixes: 0994a1bcd5f7 ("RDMA/rxe: Bump up default maximum values used via uverbs")
Link: https://lore.kernel.org/r/20221220080848.253785-2-matsuda-daisuke@fujitsu.com
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Enable RDMA FLUSH capability for rxe device

Now we are ready to enable RDMA FLUSH capability for RXE.
It can support Global Visibility and Persistence placement types.

Link: https://lore.kernel.org/r/20221206130201.30986-11-lizhijian@fujitsu.com
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Enable atomic write capability for rxe device

The capability shows that rxe device supports atomic write operation.

Link: https://lore.kernel.org/r/1669905568-62-4-git-send-email-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Limit the number of calls to each tasklet

Limit the maximum number of calls to each tasklet from rxe_do_task()
before yielding the cpu. When the limit is reached reschedule the tasklet
and exit the calling loop. This patch prevents one tasklet from consuming
100% of a cpu core and causing a deadlock or soft lockup.

Link: https://lore.kernel.org/r/20220630190425.2251-9-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Remove type 2A memory window capability

Currently the rdma_rxe driver claims to support both 2A and 2B type memory
windows. But the IBA requires

010-37.2.31: If an HCA supports the Base Memory Management
extensions, the HCA shall support either Type 2A or Type 2B MWs,
but not both.

This commit removes the device capability bit for type 2A memory windows
and adds a clarifying comment to rxe_mw.c.

Link: https://lore.kernel.org/r/20220407184321.14207-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Split kernel-only global device caps from uverbs device caps

Split out flags from ib_device::device_cap_flags that are only used
internally to the kernel into kernel_cap_flags that is not part of the
uapi. This limits the device_cap_flags to being the same bitmap that will
be copied to userspace.

This cleanly splits out the uverbs flags from the kernel flags to avoid
confusion in the flags bitmap.

Add some short comments describing which each of the kernel flags is
connected to. Remove unused kernel flags.

Link: https://lore.kernel.org/r/0-v2-22c19e565eef+139a-kern_caps_jgg@nvidia.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Change AH objects to indexed

Make changes to rxe_param.h and rxe_pool.c to allow indexing of AH
objects. Valid indices are non-zero so older providers can be detected.

Link: https://lore.kernel.org/r/20211007204051.10086-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Bump up default maximum values used via uverbs

In our internal testing we have found that default maximum values are too
small. Ideally there should be no limits, but since maximum values are
reported via ibv_query_device, we have to return some value. So, the
default maximums have been changed to large values.

Link: https://lore.kernel.org/r/20210915011220.307585-1-Rao.Shoaib@oracle.com
Signed-off-by: Rao Shoaib <Rao.Shoaib@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Fix wrong port_cap_flags

The port->attr.port_cap_flags should be set to enum
ib_port_capability_mask_bits in ib_mad.h, not
RDMA_CORE_CAP_PROT_ROCE_UDP_ENCAP.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210831083223.65797-1-weijunji@bytedance.com
Signed-off-by: Junji Wei <weijunji@bytedance.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Enable MW object pool

Currently the rxe driver has a rxe_mw struct object but nothing about
memory windows is enabled. This patch turns on memory windows and some
minor cleanup.

Set device attribute in rxe.c so max_mw = MAX_MW. Change parameters in
rxe_param.h so that MAX_MW is the same as MAX_MR. Reduce the number of
MRs and MWs to 4K from 256K. Add device capability bits for 2a and 2b
memory windows. Removed RXE_MR_TYPE_MW from the rxe_mr_type enum.

Link: https://lore.kernel.org/r/20210608042552.33275-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Add SPDX hdrs to rxe source files

Add SPDX headers to all rxe .c and .h files.

Link: https://lore.kernel.org/r/20200827145439.2273-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Remove pkey table

The RoCE spec requires RoCE devices to support only the default pkey.
However the rxe driver maintains a 64 enties pkey table and uses only the
first entry. Remove the pkey table and hard code a table of length one
hard wired with the default pkey. Replace all checks of the pkey_table
with a comparison to the default_pkey instead.

Link: https://lore.kernel.org/r/20200721101618.686110-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Set default vendor ID

The RXE driver doesn't set vendor_id and user space applications see
zeros. This causes to pyverbs tests to fail with the following traceback,
because the expectation is to have valid vendor_id.

Traceback (most recent call last):
File "tests/test_device.py", line 51, in test_query_device
self.verify_device_attr(attr)
File "tests/test_device.py", line 77, in verify_device_attr
assert attr.vendor_id != 0

In order to fix it, we will set vendor_id 0XFFFFFF, according to the IBTA
v1.4 A3.3.1 VENDOR INFORMATION section.

"""
A vendor that produces a generic controller (i.e., one that supports a
standard I/O protocol such as SRP), which does not have vendor specific
device drivers, may use the value of 0xFFFFFF in the VendorID field.
"""

Before:

hca_id: rxe0
transport: InfiniBand (0)
fw_ver: 0.0.0
node_guid: 5054:00ff:feaa:5363
sys_image_guid: 5054:00ff:feaa:5363
vendor_id: 0x0000

After:

hca_id: rxe0
transport: InfiniBand (0)
fw_ver: 0.0.0
node_guid: 5054:00ff:feaa:5363
sys_image_guid: 5054:00ff:feaa:5363
vendor_id: 0xffffff

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200406173501.1466273-1-leon@kernel.org
Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Introduce maximum WQE size to check limits

Introduce maximum WQE size to impose limits on max SGE's and inline data

Link: https://lore.kernel.org/r/1578962480-17814-2-git-send-email-rao.shoaib@oracle.com
Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rxe: Remove useless rxe_init_device_param assignments

IB devices are allocated with kzalloc and don't need explicit zero
assignments for their parameters. It can be removed safely.

Link: https://lore.kernel.org/r/20191020055724.7410-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Introduce ib_port_phys_state enum

In order to improve readability, add ib_port_phys_state enum to replace
the use of magic numbers.

Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Andrew Boyer <aboyer@tobark.org>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20190807103138.17219-2-kamalheib1@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

rdma_rxe: Use netlink messages to add/delete links

Add support for the RDMA_NLDEV_CMD_NEWLINK/DELLINK messages which allow
dynamically adding new RXE links. Deprecate the old module options for
now.

Cc: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yanjun Zhu <yanjun.zhu@oracle.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/rxe: Remove unnecessary enum values

Clang warns when an emumerated type is implicitly converted to another.

drivers/infiniband/sw/rxe/rxe.c:106:27: warning: implicit conversion
from enumeration type 'enum rxe_device_param' to different enumeration
type 'enum ib_atomic_cap' [-Wenum-conversion]
rxe->attr.atomic_cap = RXE_ATOMIC_CAP;
~ ^~~~~~~~~~~~~~
drivers/infiniband/sw/rxe/rxe.c:131:22: warning: implicit conversion
from enumeration type 'enum rxe_port_param' to different enumeration
type 'enum ib_port_state' [-Wenum-conversion]
port->attr.state = RXE_PORT_STATE;
~ ^~~~~~~~~~~~~~
drivers/infiniband/sw/rxe/rxe.c:132:24: warning: implicit conversion
from enumeration type 'enum rxe_port_param' to different enumeration
type 'enum ib_mtu' [-Wenum-conversion]
port->attr.max_mtu = RXE_PORT_MAX_MTU;
~ ^~~~~~~~~~~~~~~~
drivers/infiniband/sw/rxe/rxe.c:133:27: warning: implicit conversion
from enumeration type 'enum rxe_port_param' to different enumeration
type 'enum ib_mtu' [-Wenum-conversion]
port->attr.active_mtu = RXE_PORT_ACTIVE_MTU;
~ ^~~~~~~~~~~~~~~~~~~
drivers/infiniband/sw/rxe/rxe.c:151:24: warning: implicit conversion
from enumeration type 'enum rxe_port_param' to different enumeration
type 'enum ib_mtu' [-Wenum-conversion]
ib_mtu_enum_to_int(RXE_PORT_ACTIVE_MTU);
~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~
5 warnings generated.

Use the appropriate values from the expected enumerated type so no
conversion needs to happen then remove the unneeded definitions.

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/rxe: increase max MR limit

Increase the max MR limit to support more I/O queues
for NVMe over Fabrics hosts.

Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

rxe: expose num_possible_cpus() cnum_comp_vectors

They're completely logical, so don't impose an artificial limitation.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: Increase max number of completions to 32k

Increase limit of max CQE from 8K to 32K to allow demanding
applications to work over SoftRoCE with same configuration
as most RoCEv2 HW vendors have.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Soft RoCE driver

Soft RoCE (RXE) - The software RoCE driver

ib_rxe implements the RDMA transport and registers to the RDMA core
device as a kernel verbs provider. It also implements the packet IO
layer. On the other hand ib_rxe registers to the Linux netdev stack
as a udp encapsulating protocol, in that case RDMA, for sending and
receiving packets over any Ethernet device. This yields a RDMA
transport over the UDP/Ethernet network layer forming a RoCEv2
compatible device.

The configuration procedure of the Soft RoCE drivers requires
binding to any existing Ethernet network device. This is done with
/sys interface.

A userspace Soft RoCE library (librxe) provides user applications
the ability to run with Soft RoCE devices. The use of rxe verbs ins
user space requires the inclusion of librxe as a device specifics
plug-in to libibverbs. librxe is packaged separately.

Architecture:

+-----------------------------------------------------------+
| Application |
+-----------------------------------------------------------+
+-----------------------------------+
| libibverbs |
User +-----------------------------------+
+----------------+ +----------------+
| librxe | | HW RoCE lib |
+----------------+ +----------------+
+---------------------------------------------------------------+
+--------------+ +------------+
| Sockets | | RDMA ULP |
+--------------+ +------------+
+--------------+ +---------------------+
| TCP/IP | | ib_core |
+--------------+ +---------------------+
+------------+ +----------------+
Kernel | ib_rxe | | HW RoCE driver |
+------------+ +----------------+
+------------------------------------+
| NIC driver |
+------------------------------------+

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+-----------------------------------------------------------+
| Application |
+-----------------------------------------------------------+
+-----------------------------------+
| libibverbs |
User +-----------------------------------+
+----------------+ +----------------+
| librxe | | HW RoCE lib |
+----------------+ +----------------+
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+--------------+ +------------+
| Sockets | | RDMA ULP |
+--------------+ +------------+
+--------------+ +---------------------+
| TCP/IP | | ib_core |
+--------------+ +---------------------+
+------------+ +----------------+
Kernel | ib_rxe | | HW RoCE driver |
+------------+ +----------------+
+------------------------------------+
| NIC driver |
+------------------------------------+
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Soft RoCE resources:

[1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in
Github
[2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE
Wiki page
[3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library

Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>