RDMA/mlx5: Allow relaxed ordering read in VFs and VMs

According to PCIe spec, Enable Relaxed Ordering value in the VF's PCI
config space is wired to 0 and PF relaxed ordering (RO) setting should
be applied to the VF. In QEMU (and maybe others), when assigning VFs,
the RO bit in PCI config space is not emulated properly and is always
set to 0.

Therefore, pcie_relaxed_ordering_enabled() always returns 0 for VFs and
VMs and thus MKeys can't be created with RO read even if the PF supports
it.

pcie_relaxed_ordering_enabled() check was added to avoid a syndrome when
creating a MKey with relaxed ordering (RO) enabled when the driver's
relaxed_ordering_read_pci_enabled HCA capability is out of sync with FW.
With the new relaxed_ordering_read capability this can't happen, as it's
set regardless of RO value in PCI config space and thus can't change
during runtime.

Hence, to allow RO read in VFs and VMs, use the new HCA capability
relaxed_ordering_read without checking pcie_relaxed_ordering_enabled().
The old capability checks are kept for backward compatibility with older
FWs.

Allowing RO in VFs and VMs is valuable since it can greatly improve
performance on some setups. For example, testing throughput of a VF on
an AMD EPYC 7763 and ConnectX-6 Dx setup showed roughly 60% performance
improvement.

Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Link: https://lore.kernel.org/r/e7048640d66c341a8fa0465e099926e7989184bc.1681131553.git.leon@kernel.org
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

net/mlx5: Update relaxed ordering read HCA capabilities

Rename existing HCA capability relaxed_ordering_read to
relaxed_ordering_read_pci_enabled. This is in accordance with recent PRM
change to better describe the capability, as it's set only if both the
device supports relaxed ordering (RO) read and RO is enabled in PCI
config space.

In addition, add new HCA capability relaxed_ordering_read which is set
if the device supports RO read, regardless of RO in PCI config space.
This will be used in the following patch to allow RO in VFs and VMs.

Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Link: https://lore.kernel.org/r/caa0002fd8135086357dfcc368e2f5cc73b08480.1681131553.git.leon@kernel.org
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/mlx5: Clean UMR QP type flow from mlx5_ib_post_send()

No internal UMR operation is using mlx5_ib_post_send(), remove the UMR QP
type logic from this function.

Link: https://lore.kernel.org/r/0b2f368f14bc9266ebdf92a601ca4e1e5b1e1188.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Use mlx5_umr_post_send_wait() to update xlt

Move mlx5_ib_update_mr_pas logic to umr.c, and use
mlx5_umr_post_send_wait() instead of mlx5_ib_post_send_wait().

Since it is the last use of mlx5_ib_post_send_wait(), remove it.

Link: https://lore.kernel.org/r/55a4972f156aba3592a2fc9bcb33e2059acf295f.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Use mlx5_umr_post_send_wait() to update MR pas

Move mlx5_ib_update_mr_pas logic to umr.c, and use
mlx5_umr_post_send_wait() instead of mlx5_ib_post_send_wait().

Link: https://lore.kernel.org/r/ed8f2ee6c64804072155d727149abf7105f92536.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Move creation and free of translation tables to umr.c

The only use of the translation tables is to update the mkey translation
by a UMR operation. Move the responsibility of creating and freeing them
to umr.c

Link: https://lore.kernel.org/r/1d93f1381be82a22aaf1168cdbdfb227eac1ce62.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Use mlx5_umr_post_send_wait() to rereg pd access

Move rereg_pd_access logic to umr.c, and use mlx5_umr_post_send_wait()
instead of mlx5_ib_post_send_wait().

Link: https://lore.kernel.org/r/18da4f47edbc2561f652b7ee4e7a5269e866af77.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Use mlx5_umr_post_send_wait() to revoke MRs

Move the revoke_mr logic to umr.c, and using mlx5_umr_post_send_wait()
instead of mlx5_ib_post_send_wait().

In the new implementation, do not zero out the access flags. Before
reusing the MR, we will update it to the required access.

Link: https://lore.kernel.org/r/63717dfdaf6007f81b3e6dbf598f5bf3875ce86f.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Introduce mlx5_umr_post_send_wait()

Introduce mlx5_umr_post_send_wait() that uses a UMR adjusted flow for
posting WQEs. The next patches will gradually move UMR operations to use
this flow. Once done, will get rid of mlx5_ib_post_send_wait().

mlx5_umr_post_send_wait gets already written WQE segments and will only
memcpy it to the SQ. This way, we avoid packing all the data in a WR just
to unpack it into the WQE.

Link: https://lore.kernel.org/r/f027dd592fde62402b2d49efded8d1d22229d22b.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Move mkey ctrl segment logic to umr.c

Move set_reg_umr_segment() and its helpers to umr.c.

Link: https://lore.kernel.org/r/5a7fac8ae8543521d19d174663245ae84b910310.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Move umr checks to umr.h

Move mlx5_ib_can_load_pas_with_umr() and mlx5_ib_can_reconfig_with_umr()
to umr.h and rename them accordingly.

Link: https://lore.kernel.org/r/1b799b0142534a63dfd5bacc5f8ad2256d7777ad.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Move init and cleanup of UMR to umr.c

The first patch in a series to split UMR logic to a dedicated file. As a
start, move the init and cleanup of UMR resources to umr.c.

Link: https://lore.kernel.org/r/849e632dd1945a2534712a320cc5779f2149ba96.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>