RDMA/bnxt_re: Return error for SRQ resize

SRQ resize is not supported in the driver. But driver is not
returning error from bnxt_re_modify_srq() for SRQ resize.

Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1705985677-15551-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/bnxt_re: Fix unconditional fence for newer adapters

Older adapters required an unconditional fence for
non-wire memory operations. Newer adapters doesn't require
this and therefore, disabling the unconditional fence.

Fixes: 1801d87b3598 ("RDMA/bnxt_re: Support new 5760X P7 devices")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1705985677-15551-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/bnxt_re: Avoid creating fence MR for newer adapters

Limit the usage of fence MR to adapters older than Gen P5 products.

Fixes: 1801d87b3598 ("RDMA/bnxt_re: Support new 5760X P7 devices")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1705985677-15551-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/bnxt_re: Fix error code in bnxt_re_create_cq()

Return -ENOMEM if get_zeroed_page() fails. Don't return success.

Fixes: e275919d9669 ("RDMA/bnxt_re: Share a page to expose per CQ info with userspace")
Link: https://lore.kernel.org/r/d714306e-b7d7-4e89-b973-a9ff0f260c78@moroto.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/bnxt_re: Share a page to expose per CQ info with userspace

Gen P7 adapters needs to share a toggle bits information received
in kernel driver with the user space. User space needs this
info during the request notify call back to arm the CQ.

User space application can get this page using the
UAPI routines. Library will mmap this page and get the
toggle bits to be used in the next ARM Doorbell.

Uses a hash list to map the CQ structure from the CQ ID.
CQ structure is retrieved from the hash list while the
library calls the UAPI routine to get the toggle page
mapping. Currently the full page is mapped per CQ. This
can be optimized to enable multiple CQs from the same
application share the same page and different offsets
in the page.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1702535484-26844-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/bnxt_re: Add UAPI to share a page with user space

Gen P7 adapters require to share a toggle value for CQ
and SRQ. This is received by the driver as part of
interrupt notifications and needs to be shared with the
user space. Add a new UAPI infrastructure to get the
shared page for CQ and SRQ.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1702535484-26844-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/bnxt_re: Support new 5760X P7 devices

Add basic support for 5760X P7 devices. Add new chip
revisions. The first version support is similar to
the existing P5 adapters. Extend the current support
for P5 adapters to P7 also.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1701946060-13931-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/bnxt_re: Remove roundup_pow_of_two depth for all hardware queue resources

Rounding up the queue depth to power of two is not a hardware requirement.
In order to optimize the per connection memory usage, removing drivers
implementation which round up to the queue depths to the power of 2.

Implements a mask to maintain backward compatibility with older
library.

Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1698069803-1787-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/bnxt_re: Decrement resource stats correctly

rc_qp_count and ud_qp_count is not decremented during qp destroy.
Fix this.

Fixes: cb95709e0dca ("bnxt_re: Update the hw counters for resource stats")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1695199280-13520-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/bnxt_re: Add support for dmabuf pinned memory regions

Support the new verb which indicates dmabuf support. bnxt doesn't support
ODP. So use the pinned version of the dmabuf APIs to enable bnxt_re
devices to work as dmabuf importer.

Link: https://lore.kernel.org/r/1690790473-25850-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Protect the PD table bitmap

Syncrhonization is required to avoid simultaneous allocation
of the PD. Add a new mutex lock to handle allocation from
the PD table.

Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1692032419-21680-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/bnxt_re: Remove unnecessary variable initializations

Remove unnecessary variable initializations.

Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1691052326-32143-7-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/bnxt_re: Avoid unnecessary memset

Avoid memset by initializing the variables during
declaration itself.

Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1691052326-32143-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/bnxt_re: Cleanup bnxt_re_process_raw_qp_pkt_rx() function

- Remove unnecessary memset by initializing the variables
during declaration itself.
- Arranged variable declarartion in RCT order.

Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1691052326-32143-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA: Remove unnecessary ternary operators

There are a little ternary operators, the true or false judgment
of which is unnecessary in C language semantics.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230731085118.394443-1-ruanjinjie@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

bnxt_re: Update the hw counters for resource stats

Report the additional resource counters which enables
better debugging. Includes active RC/UD QPs,
Watermark of the resources and a count that indicates the
resize cq operations after driver load.

Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1690383081-15033-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

bnxt_re: Reorganize the resource stats

Move the resource stats to a separate stats structure.

Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1690383081-15033-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/bnxt_re: Add a new uapi for driver notification

Add driver notify uapi for application notifying
the driver about the doorbell FIFO congestion.

Link: https://lore.kernel.org/r/1689742977-9128-8-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Update alloc_page uapi for pacing

Update the alloc_page uapi functionality for handling the
mapping of doorbell pacing shared page and bar address.

Link: https://lore.kernel.org/r/1689742977-9128-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Enable pacing support for the user apps

Report the pacing capability to the user applications.

Link: https://lore.kernel.org/r/1689742977-9128-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Prevent handling any completions after qp destroy

HW may generate completions that indicates QP is destroyed.
Driver should not be scheduling any more completion handlers
for this QP, after the QP is destroyed. Since CQs are active
during the QP destroy, driver may still schedule completion
handlers. This can cause a race where the destroy_cq and poll_cq
running simultaneously.

Snippet of kernel panic while doing bnxt_re driver load unload in loop.
This indicates a poll after the CQ is freed. 

[77786.481636] Call Trace:
[77786.481640]  <TASK>
[77786.481644]  bnxt_re_poll_cq+0x14a/0x620 [bnxt_re]
[77786.481658]  ? kvm_clock_read+0x14/0x30
[77786.481693]  __ib_process_cq+0x57/0x190 [ib_core]
[77786.481728]  ib_cq_poll_work+0x26/0x80 [ib_core]
[77786.481761]  process_one_work+0x1e5/0x3f0
[77786.481768]  worker_thread+0x50/0x3a0
[77786.481785]  ? __pfx_worker_thread+0x10/0x10
[77786.481790]  kthread+0xe2/0x110
[77786.481794]  ? __pfx_kthread+0x10/0x10
[77786.481797]  ret_from_fork+0x2c/0x50

To avoid this, complete all completion handlers before returning the
destroy QP. If free_cq is called soon after destroy_qp, IB stack
will cancel the CQ work before invoking the destroy_cq verb and
this will prevent any race mentioned.

Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1689322969-25402-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/bnxt_re: Fix an IS_ERR() vs NULL check

The bnxt_re_mmap_entry_insert() function returns NULL, not error pointers.
Update the check for errors accordingly.

Fixes: 360da60d6c6e ("RDMA/bnxt_re: Enable low latency push")
Link: https://lore.kernel.org/r/8d92e85f-626b-4eca-8501-ca7024cfc0ee@moroto.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Enable low latency push

Introduce driver specific uapi functionalites. Added a alloc_page
functionality for user library to allocate specific pages. Currently added
support for allocating write combine pages for push functinality. This
interface shall be extended for other page allocations.

Allocate a WC page using the uapi hook for enabling the low latency push
in Gen P5 adapters for small packets. This is supported only for the user
space QPs.

Link: https://lore.kernel.org/r/1686679943-17117-8-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Reorg the bar mapping

Reorganize the code for allocation and mapping of Doorbell
pages. Implements new HW command to get the BAR length used by L2
driver. These changes are used by the future patch which maps the WC
Doorbell pages.

Also, introduced a new lock dpi_tbl_lock for synchronize the DB page
allocation from users.

Link: https://lore.kernel.org/r/1686679943-17117-7-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Use the common mmap helper functions

Replace the mmap handling function with common code in IB core. Create
rdma_user_mmap_entry for each mmap resource and add to the ib_core mmap
list. Add mmap_free verb support. Also, use rdma_user_mmap_io while
mapping Doorbell pages.

Link: https://lore.kernel.org/r/1686679943-17117-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: consider timeout of destroy ah as success.

If destroy_ah is timed out, it is likely to be destroyed by firmware
but it is taking longer time due to temporary slowness
in processing the rcfw command. In worst case, there might be
AH resource leak in firmware.

Sending timeout return value can dump warning message from ib_core
which can be avoided if we map timeout of destroy_ah as success.

Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1686308514-11996-14-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/bnxt_re: Fix reporting active_{speed,width} attributes

After commit 6d758147c7b8 ("RDMA/bnxt_re: Use auxiliary driver interface")
the active_{speed, width} attributes are reported incorrectly, This is
happening because ib_get_eth_speed() is called only once from
bnxt_re_ib_init() - Fix this issue by calling ib_get_eth_speed() from
bnxt_re_query_port().

Fixes: 6d758147c7b8 ("RDMA/bnxt_re: Use auxiliary driver interface")
Link: https://lore.kernel.org/r/20230529153525.87254-1-kheib@redhat.com
Signed-off-by: Kamal Heib <kheib@redhat.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Fix return value of bnxt_re_process_raw_qp_pkt_rx

bnxt_re_process_raw_qp_pkt_rx() always return 0 and ignores the return
value of bnxt_re_post_send_shadow_qp().

Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/1684397461-23082-3-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Add resize_cq support

Add resize_cq verb support for user space CQs. Resize operation for
kernel CQs are not supported now.

Driver should free the current CQ only after user library polls
for all the completions and switch to new CQ. So after the resize_cq
is returned from the driver, user library polls for existing completions
and store it as temporary data. Once library reaps all completions in the
current CQ, it invokes the ibv_cmd_poll_cq to inform the driver about
the resize_cq completion. Adding a check for user CQs in driver's
poll_cq and complete the resize operation for user CQs.
Updating uverbs_cmd_mask with poll_cq to support this.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1678868215-23626-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA: Split kernel-only global device caps from uverbs device caps

Split out flags from ib_device::device_cap_flags that are only used
internally to the kernel into kernel_cap_flags that is not part of the
uapi. This limits the device_cap_flags to being the same bitmap that will
be copied to userspace.

This cleanly splits out the uverbs flags from the kernel flags to avoid
confusion in the flags bitmap.

Add some short comments describing which each of the kernel flags is
connected to. Remove unused kernel flags.

Link: https://lore.kernel.org/r/0-v2-22c19e565eef+139a-kern_caps_jgg@nvidia.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Remove dynamic pkey table

The RoCE spec requires RoCE devices to support only the default pkey.
However the bnxt_re driver maintains a 0xFFFF entry pkey table and uses
only the first entry. Remove the pkey table and hard code a table of
length one hard wired with the default pkey.

Link: https://lore.kernel.org/r/20211125033615.483750-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Devesh Sharma <devesh.s.sharma@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Remove unsupported bnxt_re_modify_ah callback

There is no need to return always zero for function which is not
supported, especially since 0 is the wrong return code.

Link: https://lore.kernel.org/r/20211102073054.410838-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Use helper function to set GUIDs

Use addrconf_addr_eui48() helper function to set the GUIDs and remove the
driver specific version.

Link: https://lore.kernel.org/r/20211028094359.160407-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Check if the vlan is valid before reporting

When VF is configured with default vlan, HW strips the vlan from the
packet and driver receives it in Rx completion. VLAN needs to be reported
for UD work completion only if the vlan is configured on the host. Add a
check for valid vlan in the UD receive path.

Link: https://lore.kernel.org/r/1631709163-2287-12-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Correct FRMR size calculation

FRMR WQE requires to provide the log2 value of the PBL and page size. Use
the standard ilog2() to calculate the log2 value

Link: https://lore.kernel.org/r/1631709163-2287-11-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Support multiple page sizes

HW can support multiple page sizes. Enable bits for enabling sizes from 4k
to 1G by reporting page_size_cap.

Link: https://lore.kernel.org/r/1631709163-2287-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Add extended statistics counters

Implement extended statistics counters for newer adapters. Check if the FW
support for this command and issue the FW command only if is
supported. Includes code re-organization to handle extended stats. Also,
add AH and PD software counters.

Link: https://lore.kernel.org/r/1631709163-2287-2-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Prefer kcalloc over open coded arithmetic

As noted in the "Deprecated Interfaces, Language Features, Attributes, and
Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead to
values wrapping around and a smaller allocation being made than the caller
was expecting. Using those allocations could lead to linear overflows of
heap memory and other misbehaviors.

In this case this is not actually dynamic sizes: both sides of the
multiplication are constant values. However it is best to refactor this
anyway, just to keep the open-coded math idiom out of code.

So, use the purpose specific kcalloc() function instead of the argument
size * count in the kzalloc() function.

Also, remove the unnecessary initialization of the sqp_tbl variable since
it is set a few lines later.

[1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments

Link: https://lore.kernel.org/r/20210905081812.17113-1-len.baker@gmx.com
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Globally allocate and release QP memory

Convert QP object to follow IB/core general allocation scheme. That
change allows us to make sure that restrack properly kref the memory.

Link: https://lore.kernel.org/r/48e767124758aeecc433360ddd85eaa6325b34d9.1627040189.git.leonro@nvidia.com
Reviewed-by: Gal Pressman <galpress@amazon.com> #efa
Tested-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> #rdma and core
Tested-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Add missing spin lock initialization

Add the missing initialization of srq lock.

Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Link: https://lore.kernel.org/r/1629343553-5843-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Fix uninitialized struct bit field rsvd1

The bit field rsvd1 in resp is not being initialized and garbage data is
being copied from the stack back to userspace via the ib_copy_to_udata
call. Fix this by setting the entire struct resp to zero; this will ensure
that further new bit fields in the future will be zero'd too.

Link: https://lore.kernel.org/r/20210623182437.163801-1-colin.king@canonical.com
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 879740517dab ("RDMA/bnxt_re: Update ABI to pass wqe-mode to user space")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
[jgg: remove extra zeroing]
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Update ABI to pass wqe-mode to user space

Changing ucontext ABI response structure to pass wqe_mode to user library.
A flag in comp_mask has been set to indicate presence of wqe_mode.

Moved wqe-mode ABI to uapi/rdma/bnxt_re-abi.h

Link: https://lore.kernel.org/r/20210616202817.1185276-1-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Enable global atomic ops if platform supports

Enabling Atomic operations for Gen P5 devices if the underlying platform
supports global atomic ops.

Link: https://lore.kernel.org/r/20210603131534.982257-2-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Drop unnecessary NULL checks after container_of

The result of container_of() operations is never NULL unless the first
element of the embedding structure is extracted. This is either not the
case here, or the pointer passed to container_of() is known to be not
NULL. The NULL checks are therefore unnecessary and misleading.
Remove them.

The channges in this patch were made automatically with the following
Coccinelle script.

@@
type t;
identifier v;
statement s;
@@

<+...
(
t v = container_of(...);
|
v = container_of(...);
)
...
when != v
- if (\( !v \| v == NULL \) ) s
...+>

Link: https://lore.kernel.org/r/20210514153606.1377119-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Support more than 255 rdma ports

Current code uses many different types when dealing with a port of a RDMA
device: u8, unsigned int and u32. Switch to u32 to clean up the logic.

This allows us to make (at least) the core view consistent and use the
same type. Unfortunately not all places can be converted. Many uverbs
functions expect port to be u8 so keep those places in order not to break
UAPIs. HW/Spec defined values must also not be changed.

With the switch to u32 we now can support devices with more than 255
ports. U32_MAX is reserved to make control logic a bit easier to deal
with. As a device with U32_MAX ports probably isn't going to happen any
time soon this seems like a non issue.

When a device with more than 255 ports is created uverbs will report the
RDMA device as having 255 ports as this is the max currently supported.

The verbs interface is not changed yet because the IBTA spec limits the
port size in too many places to be u8 and all applications that relies in
verbs won't be able to cope with this change. At this stage, we are
extending the interfaces that are using vendor channel solely

Once the limitation is lifted mlx5 in switchdev mode will be able to have
thousands of SFs created by the device. As the only instance of an RDMA
device that reports more than 255 ports will be a representor device and
it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other
ULPs aren't effected by this change and their sysfs/interfaces that are
exposes to userspace can remain unchanged.

While here cleanup some alignment issues and remove unneeded sanity
checks (mainly in rdmavt),

Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Allow bigger MR creation

Allow users to create bigger MRs. Remove the check that prevented creating
MRs with number of pages more than 512.

Link: https://lore.kernel.org/r/1610012608-14528-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Code refactor while populating user MRs

Refactor code that populates MR page buffer list. Instead of allocating a
pbl_tbl to hold the buffer list, pass the struct ib_umem directly to
bnxt_qplib_alloc_init_hwq() as done for other user space memories. Fix
the PBL level to handle the above mentioned change.

Also, remove an unwanted flag from the input to bnxt_qplib_reg_mr()
function.

Link: https://lore.kernel.org/r/1610012608-14528-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Fix entry size during SRQ create

Only static WQE is supported for SRQ. So always use the max supported SGEs
while calculating SRQ entry size.

Fixes: 2bb3c32c5c5f ("RDMA/bnxt_re: Change wr posting logic to accommodate variable wqes")
Link: https://lore.kernel.org/r/1602569752-12745-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Check create_flags during create_qp

Each driver should check that the QP attrs create_flags is supported.
Unfortuantely when create_flags was added to the QP attrs the drivers were
not updated. uverbs_ex_cmd_mask was used to block it - even though kernel
drivers use these flags too.

Check that flags is zero in all drivers that don't use it, remove
IB_USER_VERBS_EX_CMD_CREATE_QP from uverbs_ex_cmd_mask. Fix the error code
to be EOPNOTSUPP.

Link: https://lore.kernel.org/r/8-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Check flags during create_cq

Each driver should check that the CQ attrs is supported. Unfortuantely
when flags was added to the CQ attrs the drivers were not updated,
uverbs_ex_cmd_mask was used to block it. This was missed when create CQ
was converted to ioctl, so non-zero flags could have been passed into
drivers.

Check that flags is zero in all drivers that don't use it, remove
IB_USER_VERBS_EX_CMD_CREATE_CQ from uverbs_ex_cmd_mask.

Fixes: 41b2a71fc848 ("IB/uverbs: Move ioctl path of create_cq and destroy_cq to a new file")
Link: https://lore.kernel.org/r/7-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Check attr_mask during modify_qp

Each driver should check that it can support the provided attr_mask during
modify_qp. IB_USER_VERBS_EX_CMD_MODIFY_QP was being used to block
modify_qp_ex because the driver didn't check RATE_LIMIT.

Link: https://lore.kernel.org/r/6-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Set queue pair state when being queried

The API for ib_query_qp requires the driver to set cur_qp_state on return,
add the missing set.

Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/20201021114952.38876-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Fix sizeof mismatch for allocation of pbl_tbl.

An incorrect sizeof is being used, u64 * is not correct, it should be just
u64 for a table of umem_pgs number of u64 items in the pbl_tbl. Use the
idiom sizeof(*pbl_tbl) to get the object type without the need to
explicitly use u64.

Link: https://lore.kernel.org/r/20201006114700.537916-1-colin.king@canonical.com
Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)")
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Use rdma_umem_for_each_dma_block()

This driver is taking the SGL out of the umem and passing it through a
struct bnxt_qplib_sg_info. Instead of passing the SGL pass the umem and
then use rdma_umem_for_each_dma_block() directly.

Move the calls of ib_umem_num_dma_blocks() closer to their actual point of
use, npages is only set for non-umem pbl flows.

Link: https://lore.kernel.org/r/0-v1-b37437a73f35+49c-bnxt_re_dma_block_jgg@nvidia.com
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Tested-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt: Do not use ib_umem_page_count() or ib_umem_num_pages()

ib_umem_page_count() returns the number of 4k entries required for a DMA
map, but bnxt_re already computes a variable page size. The correct API to
determine the size of the page table array is ib_umem_num_dma_blocks().

Fix the overallocation of the page array in fill_umem_pbl_tbl() when
working with larger page sizes by using the right function. Lightly
re-organize this function to make it clearer.

Replace the other calls to ib_umem_num_pages().

Fixes: d85582517e91 ("RDMA/bnxt_re: Use core helpers to get aligned DMA address")
Link: https://lore.kernel.org/r/11-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/umem: Add rdma_umem_for_each_dma_block()

This helper does the same as rdma_for_each_block(), except it works on a
umem. This simplifies most of the call sites.

Link: https://lore.kernel.org/r/4-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Allow fail of destroy CQ

Like any other verbs objects, CQ shouldn't fail during destroy, but
mlx5_ib didn't follow this contract with mixed IB verbs objects with
DEVX. Such mix causes to the situation where FW and kernel are fully
interdependent on the reference counting of each side.

Kernel verbs and drivers that don't have DEVX flows shouldn't fail.

Fixes: e39afe3d6dbd ("RDMA: Convert CQ allocations to be under core responsibility")
Link: https://lore.kernel.org/r/20200907120921.476363-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Restore ability to fail on SRQ destroy

In similar way to other IB objects, restore the ability to return error on
SRQ destroy. Strictly speaking, this change is not necessary, and provided
here to ensure a symmetrical interface like other destroy functions.

Fixes: 68e326dea1db ("RDMA: Handle SRQ allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Restore ability to fail on AH destroy

Like any other IB verbs objects, AH are refcounted by ib_core. The release
of those objects are controlled by ib_core with promise that AH destroy
can't fail.

Being SW object for now, this change makes dealloc_ah() to behave like any
other destroy IB flows.

Fixes: d345691471b4 ("RDMA: Handle AH allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Restore ability to fail on PD deallocate

The IB verbs objects are counted by the kernel and ib_core ensures that
deallocate PD will success so it will be called once all other objects
that depends on PD will be released. This is achieved by managing various
reference counters on such objects.

The mlx5 driver didn't follow this standard flow when allowed DEVX objects
that are not managed by ib_core to be interleaved with the ones under
ib_core responsibility.

In such interleaved scenarios deallocate command can fail and ib_core will
leave uobject in internal DB and attempt to clean it later to free
resources anyway.

This change partially restores returned value from dealloc_pd() for all
drivers, but keeping in mind that non-DEVX devices and kernel verbs paths
shouldn't fail.

Fixes: 21a428a019c9 ("RDMA: Handle PD allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Remove the qp from list only if the qp destroy succeeds

Driver crashes when destroy_qp is re-tried because of an error
returned. This is because the qp entry was removed from the qp list during
the first call.

Remove qp from the list only if destroy_qp returns success.

The driver will still trigger a WARN_ON due to the memory leaking, but at
least it isn't corrupting memory too.

Fixes: 8dae419f9ec7 ("RDMA/bnxt_re: Refactor queue pair creation code")
Link: https://lore.kernel.org/r/1598292876-26529-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Do not report transparent vlan from QP1

QP1 Rx CQE reports transparent VLAN ID in the completion and this is used
while reporting the completion for received MAD packet. Check if the vlan
id is configured before reporting it in the work completion.

Fixes: 84511455ac5b ("RDMA/bnxt_re: report vlan_id and sl in qp1 recv completion")
Link: https://lore.kernel.org/r/1598292876-26529-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

treewide: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

RDMA/bnxt_re: Change wr posting logic to accommodate variable wqes

Modifying the post-send and post-recv to initialize the wqes slot by slot
dynamically depending on the number of max sges requested by consumer at
the time of QP creation.

Changed the QP creation logic to determine the size of SQ and RQ in 16B
slots based on the number of wqe and number of SGEs requested by consumer

Link: https://lore.kernel.org/r/1594822619-4098-6-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: introduce wqe mode to select execution path

The bnxt_re driver need to decide on how much SQ and RQ memory should to
be allocated and which wqe posting/polling algorithm to use.

Making changes to set the wqe-mode to a default value during device
registration sequence. The wqe-mode is passed to the lower layer driver as
well. Going forward in the lower layer driver wqe-mode will be used to
decide execution path. Initializing the wqe-mode to static wqe type for
now.

Link: https://lore.kernel.org/r/1594822619-4098-2-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Remove the udata parameter from alloc_mr callback

Allocating an MR flow can only be initiated by kernel users, and not from
userspace so a udata parameter is redundant.

Link: https://lore.kernel.org/r/20200706120343.10816-4-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/bnxt_re: Remove FMR leftovers

The bnxt_re_fmr struct is never referenced and the max_fmr items
in bnxt_qplib_dev_attr are never read.

Link: https://lore.kernel.org/r/6-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Group create AH arguments in struct

Following patch adds additional argument to the create AH function, so it
make sense to group ah_attr and flags arguments in struct.

Link: https://lore.kernel.org/r/20200430192146.12863-13-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Acked-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Simplify obtaining queue entry from hw ring

Restructring the data path and control path queue management code to
simplify the way a queue element is extracted from the hardware ring.

Introduced a new function which will give a pointer to the next ring item
depending upon the current cons/prod index in the hardware queue.

Further, there are hardcoding when size of queue entry is calculated,
replacing it with an inline function. This function would be easier to
expand if need going forward.

The code section to initialize the PSN search areas has also been
restructured and couple of functions has been added there.

Link: https://lore.kernel.org/r/1585851136-2316-4-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Remove a redundant 'memset'

'wqe' is already zeroed at the top of the 'while' loop, just a few lines
below, and is not used outside of the loop.

So there is no need to zero it again, or for the variable to be declared
outside the loop.

Link: https://lore.kernel.org/r/20200308065442.5415-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/providers: Fix return value when QP type isn't supported

The proper return code is "-EOPNOTSUPP" when the requested QP type is
not supported by the provider.

Link: https://lore.kernel.org/r/20200130082049.463-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Remove set but not used variable 'dev_attr'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function 'bnxt_re_create_gsi_qp':
drivers/infiniband/hw/bnxt_re/ib_verbs.c:1283:30: warning:
variable 'dev_attr' set but not used [-Wunused-but-set-variable]

commit 8dae419f9ec7 ("RDMA/bnxt_re: Refactor queue pair creation code")
involved this, but not used, so remove it.

Link: https://lore.kernel.org/r/20200227064542.91205-1-yuehaibing@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: use ibdev based message printing functions

Replacing the dev_err/dbg/warn with ibdev_err/dbg/warn. In the IB device
provider driver these functions are recommended to use.

Currently qplib layer function calls has not been replaced due to
unavailability of ib_device pointer at that layer.

Link: https://lore.kernel.org/r/1581786665-23705-9-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Refactor hardware queue memory allocation

At top level there are three major data structure addition. viz
bnxt_qplib_hwq_attr, bnxt_qplib_sg_info and bnxt_qplib_tqm_ctx

Intorduction of first data structure reduces the arguments list to
bnxt_re_alloc_init_hwq() function. There are changes all over the driver
code to incorporate this new structure. The caller needs to fill the
attribute data structure and pass to this function.

The second data structure is to pass memory region description
viz. sghead, page_size and page_shift. There are changes all over the
driver code to initialize bnxt_re_sg_info data structure. The new data
structure helps to reduce the argument list of __alloc_pbl() function
call.

Till now the TQM rings related members were not collected under any
specific data-structure making it hard to manage. The third data
sctructure bnxt_qplib_tqm_ctx is added to refactor the TQM queue
allocation and initialization.

Link: https://lore.kernel.org/r/1581786665-23705-4-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Replace chip context structure with pointer

The chip_ctx member in bnxt_re_dev structure is now a pointer to struct
bnxt_qplib_chip_ctx. Since the member type has changed there are changes
in rest of the code wherever dev->chip_ctx is used.

Link: https://lore.kernel.org/r/1581786665-23705-3-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Refactor queue pair creation code

Restructuring the bnxt_re_create_qp function. Listing below the major
changes:
- Monolithic central part of create_qp where attributes are initialized
is now enclosed in one function and this new function has few more
sub-functions.
- Top level qp limit checking code moved to a function.
- GSI QP creation and GSI Shadow qp creation code is handled in a sub
function.

Link: https://lore.kernel.org/r/1581786665-23705-2-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Use rdma_read_gid_hw_context to retrieve HW gid index

bnxt_re HW maintains a GID table with only a single entry for the two
duplicate GID entries (v1 and v2). Driver needs to map stack gid index to
the HW table gid index. Use the new API rdma_read_gid_hw_context () to
retrieve the HW GID context to get the HW table index.

Link: https://lore.kernel.org/r/1582107594-5180-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB: Allow calls to ib_umem_get from kernel ULPs

So far the assumption was that ib_umem_get() and ib_umem_odp_get()
are called from flows that start in UVERBS and therefore has a user
context. This assumption restricts flows that are initiated by ULPs
and need the service that ib_umem_get() provides.

This patch changes ib_umem_get() and ib_umem_odp_get() to get IB device
directly by relying on the fact that both UVERBS and ULPs sets that
field correctly.

Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

RDMA/bnxt_re: Avoid freeing MR resources if dereg fails

The driver returns an error code for MR dereg, but frees the MR structure.
When the MR dereg is retried due to previous error, the system crashes as
the structure is already freed.

BUG: unable to handle kernel NULL pointer dereference at 00000000000001b8
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 7 PID: 12178 Comm: ib_send_bw Kdump: loaded Not tainted 4.18.0-124.el8.x86_64 #1
Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 1.1.10 03/10/2015
RIP: 0010:__dev_printk+0x2a/0x70
Code: 0f 1f 44 00 00 49 89 d1 48 85 f6 0f 84 f6 2b 00 00 4c 8b 46 70 4d 85 c0 75 04 4c 8b
46 10 48 8b 86 a8 00 00 00 48 85 c0 74 16 <48> 8b 08 0f be 7f 01 48 c7 c2 13 ac ac 83 83 ef 30 e9 10 fe ff ff
RSP: 0018:ffffaf7c04607a60 EFLAGS: 00010006
RAX: 00000000000001b8 RBX: ffffa0010c91c488 RCX: 0000000000000246
RDX: ffffaf7c04607a68 RSI: ffffa0010c91caa8 RDI: ffffffff83a788eb
RBP: ffffaf7c04607ac8 R08: 0000000000000000 R09: ffffaf7c04607a68
R10: 0000000000000000 R11: 0000000000000001 R12: ffffaf7c04607b90
R13: 000000000000000e R14: 0000000000000000 R15: 00000000ffffa001
FS: 0000146fa1f1cdc0(0000) GS:ffffa0012fac0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000001b8 CR3: 000000007680a003 CR4: 00000000001606e0
Call Trace:
dev_err+0x6c/0x90
? dev_printk_emit+0x4e/0x70
bnxt_qplib_rcfw_send_message+0x594/0x660 [bnxt_re]
? dev_err+0x6c/0x90
bnxt_qplib_free_mrw+0x80/0xe0 [bnxt_re]
bnxt_re_dereg_mr+0x2e/0xd0 [bnxt_re]
ib_dereg_mr+0x2f/0x50 [ib_core]
destroy_hw_idr_uobject+0x20/0x70 [ib_uverbs]
uverbs_destroy_uobject+0x2e/0x170 [ib_uverbs]
__uverbs_cleanup_ufile+0x6e/0x90 [ib_uverbs]
uverbs_destroy_ufile_hw+0x61/0x130 [ib_uverbs]
ib_uverbs_close+0x1f/0x80 [ib_uverbs]
__fput+0xb7/0x230
task_work_run+0x8a/0xb0
do_exit+0x2da/0xb40
...
RIP: 0033:0x146fa113a387
Code: Bad RIP value.
RSP: 002b:00007fff945d1478 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff02
RAX: 0000000000000000 RBX: 000055a248908d70 RCX: 0000000000000000
RDX: 0000146fa1f2b000 RSI: 0000000000000001 RDI: 000055a248906488
RBP: 000055a248909630 R08: 0000000000010000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 000055a248906488
R13: 0000000000000001 R14: 0000000000000000 R15: 000055a2489095f0

Do not free the MR structures, when driver returns error to the stack.

Fixes: 872f3578241d ("RDMA/bnxt_re: Add support for MRs with Huge pages")
Link: https://lore.kernel.org/r/1574671174-5064-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/umem: remove the dmasync argument to ib_umem_get

The argument is always ignored, so remove it.

Link: https://lore.kernel.org/r/20191113073214.9514-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Remove unsupported modify_device callback

There is no need to return always zero for function which is not
supported.

Link: https://lore.kernel.org/r/20190923104158.5331-3-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Fix goto target to release the allocated memory

In bnxt_re_create_srq(), when ib_copy_to_udata() fails allocated memory
should be released by goto fail.

Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Link: https://lore.kernel.org/r/20190910222120.16517-1-navid.emamdoost@gmail.com
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Introduce ib_port_phys_state enum

In order to improve readability, add ib_port_phys_state enum to replace
the use of magic numbers.

Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Andrew Boyer <aboyer@tobark.org>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20190807103138.17219-2-kamalheib1@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Honor vlan_id in GID entry comparison

A GID entry consists of GID, vlan, netdev and smac. Extend GID duplicate
check comparisons to consider vlan_id as well to support IPv6 VLAN based
link local addresses. Introduce a new structure (bnxt_qplib_gid_info) to
hold gid and vlan_id information.

The issue is discussed in the following thread
https://lore.kernel.org/r/AM0PR05MB4866CFEDCDF3CDA1D7D18AA5D1F20@AM0PR05MB4866.eurprd05.prod.outlook.com

Fixes: 823b23da7113 ("IB/core: Allow vlan link local address based RoCE GIDs")
Cc: <stable@vger.kernel.org> # v5.2+
Link: https://lore.kernel.org/r/20190715091913.15726-1-selvin.xavier@broadcom.com
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Co-developed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Check umem pointer validity prior to release

Update ib_umem_release() to behave similarly to kfree() and allow
submitting NULL pointer as safe input to this function.

Fixes: a52c8e2469c3 ("RDMA: Clean destroy CQ in drivers do not return errors")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA: Convert CQ allocations to be under core responsibility

Ensure that CQ is allocated and freed by IB/core and not by drivers.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Tested-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA: Clean destroy CQ in drivers do not return errors

Like all other destroy commands, .destroy_cq() call is not supposed
to fail. In all flows, the attempt to return earlier caused to memory
leaks.

This patch converts .destroy_cq() to do not return any errors.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA: Move uverbs_abi_ver into struct ib_device_ops

No reason for every driver to emit code to set this, just make it part of
the driver's existing static const ops structure.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Use core helpers to get aligned DMA address

Call the core helpers to retrieve the HW aligned address to use for the
MR, within a supported bnxt_re page size.

Remove checking the umem->hugtetlb flag as it is no longer required. The
new DMA block iterator will return the 2M aligned address if the MR is
backed by 2M huge pages.

Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Introduce and use GID attr helper to read RoCE L2 fields

Instead of RoCE drivers figuring out vlan, smac fields while working on
QP/AH, provide a helper routine to read the L2 fields such as vlan_id and
source mac address.

This moves logic from mlx5 driver to core for wider usage for RoCE ports.

This is a preparation patch to allow detaching netdev in subsequent patch.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

ib/bnxt: Remove mention of idr_alloc from comment

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/drivers: Convert easy drivers to use ib_device_set_netdev()

Drivers that never change their ndev dynamically do not need to use
the get_netdev callback.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Acked-by: Adit Ranadive <aditr@vmware.com>

RDMA: Handle SRQ allocations by IB/core

Convert SRQ allocation from drivers to be in the IB/core

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Handle AH allocations by IB/core

Simplify drivers by ensuring lifetime of ib_ah object. The changes
in .create_ah() go hand in hand with relevant update in .destroy_ah().

We will use this opportunity and convert .destroy_ah() to don't fail, as
it was suggested a long time ago, because there is nothing to do in case
of failure during destroy.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB: Pass only ib_udata in function prototypes

Now when ib_udata is passed to all the driver's object create/destroy APIs
the ib_udata will carry the ib_ucontext for every user command. There is
no need to also pass the ib_ucontext via the functions prototypes.

Make ib_udata the only argument psssed.

Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB: Pass uverbs_attr_bundle down ib_x destroy path

The uverbs_attr_bundle with the ucontext is sent down to the drivers ib_x
destroy path as ib_udata. The next patch will use the ib_udata to free the
drivers destroy path from the dependency in 'uobject->context' as we
already did for the create path.

Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Use correct sizing on buffers holding page DMA addresses

umem->nmap is used while allocating internal buffer for storing
page DMA addresses. This causes out of bounds array access while iterating
the umem DMA-mapped SGL with umem page combining as umem->nmap can be
less than number of system pages in umem.

Use ib_umem_num_pages() instead of umem->nmap to size the page array.
Add a new structure (bnxt_qplib_sg_info) to pass sglist, npages and nmap.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

bnxt_re: Clean cq for kernel consumers only

Kernel space provider driver should clean the CQs belonging to kernel
space consumers only. The current implementation is doing reverse of it.

Fixing the same by avoiding the call to __clean_cq on a kernel qp during
destroy.

Fixes: c50866e2853a ("bnxt_re: fix the regression due to changes in alloc_pbl")
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Handle ucontext allocations by IB/core

Following the PD conversion patch, do the same for ucontext allocations.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

bnxt_re: fix the regression due to changes in alloc_pbl

While adding the use of for_each_sg_dma_page iterator for Brodcom's rdma
driver, there was a regression added in the __alloc_pbl path. The change
left bnxt_re in DOA state in for-next branch.

Fixing the regression to avoid the host crash when a user space object is
created. Restricting the unconditional access to hwq.pg_arr when hwq is
initialized for user space objects.

Fixes: 161ebe2498d4 ("RDMA/bnxt_re: Use for_each_sg_dma_page iterator on umem SGL")
Reported-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/{hw,sw}: Remove 'uobject->context' dependency in object creation APIs

Now when we have the udata passed to all the ib_xxx object creation APIs
and the additional macro 'rdma_udata_to_drv_context' to get the
ib_ucontext from ib_udata stored in uverbs_attr_bundle, we can finally
start to remove the dependency of the drivers in the
ib_xxx->uobject->context.

Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: fix or'ing of data into an uninitialized struct member

The struct member comp_mask has not been initialized however a bit
pattern is being bitwise or'd into the member and hence other bit
fields in comp_mask may contain any garbage from the stack. Fix this
by making the bitwise or into an assignment.

Fixes: 95b86d1c91ad ("RDMA/bnxt_re: Update kernel user abi to pass chip context")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Use for_each_sg_dma_page iterator on umem SGL

Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped
SGL and get the page DMA address. This avoids the extra loop to iterate
pages in the SGE when for_each_sg iterator is used.

Additionally, purge umem->page_shift usage in the driver as its only
relevant for ODP MRs. Use system page size and shift instead.

Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Handle PD allocations by IB/core

The PD allocations in IB/core allows us to simplify drivers and their
error flows in their .alloc_pd() paths. The changes in .alloc_pd() go hand
in had with relevant update in .dealloc_pd().

We will use this opportunity and convert .dealloc_pd() to don't fail, as
it was suggested a long time ago, failures are not happening as we have
never seen a WARN_ON print.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Update kernel user abi to pass chip context

User space verbs provider library would need chip context. Changing the
ABI to add chip version details in structure. Furthermore, changing the
kernel driver ucontext allocation code to initialize the abi structure
with appropriate values.

As suggested by community, appended the new fields at the bottom of the
ABI structure and retaining to older fields as those were in the older
versions.

Keeping the ABI version at 1 and adding a new field in the ucontext
response structure to hold the component mask. The user space library
should check pre-defined flags to figure out if a certain feature is
supported on not.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Add extended psn structure for 57500 adapters

The new 57500 series of adapter has bigger psn search structure. The size
of new structure is 16B. Changing the control path memory allocation and
fast path code to accommodate the new psn structure while maintaining the
backward compatibility.

There are few additional changes listed below:
- For 57500 chip max-sge are limited to 6 for now.
- For 57500 chip max-receive-sge should be set to 6 for now.
- Add driver/hardware interface structure for new chip.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Enable GSI QP support for 57500 series

In the new 57500 series of adapters the GSI qp is a UD type QP unlike the
previous generation where it was a Raw Eth QP. Changing the control and
data path to support the same. Listing all the significant diffs:

- AH creation resolve network type unconditionally
- Add check at relevant places to distinguish from Raw Eth
processing flow.
- bnxt_re_process_res_ud_wc report completion with GRH flag
when qp is GSI.
- Change length, cfa_meta and smac to match new driver/hardware
interface.
- Add new driver/hardware interface.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Add 64bit doorbells for 57500 series

The new chip series has 64 bit doorbell for notification queues. Thus,
both control and data path event queues need new routines to write 64 bit
doorbell. Adding the same. There is new doorbell interface between the
chip and driver. Changing the chip specific data structure definitions.

Additional significant changes are listed below
- bnxt_re_net_ring_free/alloc takes a new argument
- bnxt_qplib_enable_nq and enable_rcfw uses new doorbell offset
for new chip.
- DB mapping for NQ and CREQ now maps 8 bytes.
- DBR_DBR_* macros renames to DBC_DBC_*
- store nq_db_offset in a 32bit data type.
- got rid of __iowrite64_copy, used writeq instead.
- changed the DB header initialization to simpler scheme.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/{core,hw}: Have ib_umem_get extract the ib_ucontext from ib_udata

ib_umem_get() can only be called in a method callback, which always has a
udata parameter. This allows ib_umem_get() to derive the ucontext pointer
directly from the udata without requiring the drivers to find it in some
way or another.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>

RDMA/bnxt_re: Make use of destroy AH sleepable flag

When in a sleepable (non-atomic) context, wait for firmware completion
instead of polling for it.

Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Make use of create AH sleepable flag

When in a sleepable (non-atomic) context, wait for firmware completion
instead of polling for it.

Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Mark if destroy address handle is in a sleepable context

Introduce a 'flags' field to destroy address handle callback and add a
flag that marks whether the callback is executed in an atomic context or
not.

This will allow drivers to wait for completion instead of polling for it
when it is allowed.

Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Mark if create address handle is in a sleepable context

Introduce a 'flags' field to create address handle callback and add a flag
that marks whether the callback is executed in an atomic context or not.

This will allow drivers to wait for completion instead of polling for it
when it is allowed.

Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Cleanup undesired pd->uobject usage

Drivers should be using udata to determine if a method is invoked from
user space or kernel space. A pd does not necessarily say a different
objects is kernel or user.

Transforming the tests to use udata eliminates a large number of uobject
references from the drivers.

Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Add missing spin lock initialization

Add the missing initalization of the cq_lock and qplib.flush_lock.

Fixes: 942c9b6ca8de ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Remove unused parameter from ib_modify_qp_is_ok()

The ll parameter is not used in ib_modify_qp_is_ok(), so remove it.

Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

bnxt_re: Fix couple of memory leaks that could lead to IOMMU call traces

1. DMA-able memory allocated for Shadow QP was not being freed.
2. bnxt_qplib_alloc_qp_hdr_buf() had a bug wherein the SQ pointer was
erroneously pointing to the RQ. But since the corresponding
free_qp_hdr_buf() was correct, memory being free was less than what was
allocated.

Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/providers: Fix return value from create_srq callbacks

The proper return code is "-EOPNOTSUPP" when the create_srq() callback
is not supported.

Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA, core and ULPs: Declare ib_post_send() and ib_post_recv() arguments const

Since neither ib_post_send() nor ib_post_recv() modify the data structure
their second argument points at, declare that argument const. This change
makes it necessary to declare the 'bad_wr' argument const too and also to
modify all ULPs that call ib_post_send(), ib_post_recv() or
ib_post_srq_recv(). This patch does not change any functionality but makes
it possible for the compiler to verify whether the
ib_post_(send|recv|srq_recv) really do not modify the posted work request.

To make this possible, only one cast had to be introduce that casts away
constness, namely in rpcrdma_post_recvs(). The only way I can think of to
avoid that cast is to introduce an additional loop in that function or to
change the data type of bad_wr from struct ib_recv_wr ** into int
(an index that refers to an element in the work request list). However,
both approaches would require even more extensive changes than this
patch.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Constify the argument of the work request conversion functions

When posting a send work request, the work request that is posted is not
modified by any of the RDMA drivers. Make this explicit by constifying
most ib_send_wr pointers in RDMA transport drivers.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Modify a fall-through annotation

This patch avoids that gcc reports the following warning when building
with W=1:

drivers/infiniband/hw/bnxt_re/ib_verbs.c:2404:4: warning: this statement may fall through [-Wimplicit-fallthrough=]

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Fix storage of PortInfo CapabilityMask in the kernel

The internal flag IP_BASED_GIDS was added to a field that was being used
to hold the port Info CapabilityMask without considering the effects this
will have. Since most drivers just use the value from the HW MAD it means
IP_BASED_GIDS will also become set on any HW that sets the IBA flag
IsOtherLocalChangesNoticeSupported - which is not intended.

Fix this by keeping port_cap_flags only for the IBA CapabilityMask value
and store unrelated flags externally. Move the bit definitions for this to
ib_mad.h to make it clear what is happening.

To keep the uAPI unchanged define a new set of flags in the uapi header
that are only used by ib_uverbs_query_port_resp.port_cap_flags which match
the current flags supported in rdma-core, and the values exposed by the
current kernel.

Fixes: b4a26a27287a ("IB: Report using RoCE IP based gids in port caps")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

IB/core: add max_send_sge and max_recv_sge attributes

This patch replaces the ib_device_attr.max_sge with max_send_sge and
max_recv_sge. It allows ulps to take advantage of devices that have very
different send and recv sge depths. For example cxgb4 has a max_recv_sge
of 4, yet a max_send_sge of 16. Splitting out these attributes allows
much more efficient use of the SQ for cxgb4 with ulps that use the RDMA_RW
API. Consider a large RDMA WRITE that has 16 scattergather entries.
With max_sge of 4, the ulp would send 4 WRITE WRs, but with max_sge of
16, it can be done with 1 WRITE WR.

Acked-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Convert drivers to use the AH's sgid_attr in post_wr paths

For UD the drivers were doing a sgid_index lookup into the cache to get
the attrs, however we can now directly access the same attrs stores in
the ib_ah instead and remove the lookup.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

RDMA: Convert drivers to use sgid_attr instead of sgid_index

The core code now ensures that all driver callbacks that receive an
rdma_ah_attrs will have a sgid_attr's pointer if there is a GRH present.

Drivers can use this pointer instead of calling a query function with
sgid_index. This simplifies the drivers and also avoids races where a
gid_index lookup may return different data if it is changed.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

RDMA: Use GID from the ib_gid_attr during the add_gid() callback

Now that ib_gid_attr contains the GID, make use of that in the add_gid()
callback functions for the provider drivers to simplify the add_gid()
implementations.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Use ib_gid_attr during GID modification

Now that ib_gid_attr contains device, port and index, simplify the
provider APIs add_gid() and del_gid() to use device, port and index
fields from the ib_gid_attr attributes structure.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/providers: Avoid null netdev check for RoCE

Now that IB core GID cache ensures that all RoCE entries have an
associated netdev remove null checks from the provider drivers for
clarity.

Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks

On 32-bit targets, we otherwise get a warning about an impossible constant
integer expression:

In file included from include/linux/kernel.h:11,
from include/linux/interrupt.h:6,
from drivers/infiniband/hw/bnxt_re/ib_verbs.c:39:
drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function 'bnxt_re_query_device':
include/linux/bitops.h:7:24: error: left shift count >= width of type [-Werror=shift-count-overflow]
#define BIT(nr) (1UL << (nr))
^~
drivers/infiniband/hw/bnxt_re/bnxt_re.h:61:34: note: in expansion of macro 'BIT'
#define BNXT_RE_MAX_MR_SIZE_HIGH BIT(39)
^~~
drivers/infiniband/hw/bnxt_re/bnxt_re.h:62:30: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE_HIGH'
#define BNXT_RE_MAX_MR_SIZE BNXT_RE_MAX_MR_SIZE_HIGH
^~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/bnxt_re/ib_verbs.c:149:25: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE'
ib_attr->max_mr_size = BNXT_RE_MAX_MR_SIZE;
^~~~~~~~~~~~~~~~~~~

Fixes: 872f3578241d ("RDMA/bnxt_re: Add support for MRs with Huge pages")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Remove an unused variable

This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Selvin Xavier <selvin.xavier@broadcom.com>
Cc: Devesh Sharma <devesh.sharma@broadcom.com>
Cc: Somnath Kotur <somnath.kotur@broadcom.com>
Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Avoid Hard lockup during error CQE processing

Hitting the following hardlockup due to a race condition in
error CQE processing.

[26146.879798] bnxt_en 0000:04:00.0: QPLIB: FP: CQ Processed Req
[26146.886346] bnxt_en 0000:04:00.0: QPLIB: wr_id[1251] = 0x0 with status 0xa
[26156.350935] NMI watchdog: Watchdog detected hard LOCKUP on cpu 4
[26156.357470] Modules linked in: nfsd auth_rpcgss nfs_acl lockd grace
[26156.447957] CPU: 4 PID: 3413 Comm: kworker/4:1H Kdump: loaded
[26156.457994] Hardware name: Dell Inc. PowerEdge R430/0CN7X8,
[26156.466390] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
[26156.472639] Call Trace:
[26156.475379] <NMI> [<ffffffff98d0d722>] dump_stack+0x19/0x1b
[26156.481833] [<ffffffff9873f775>] watchdog_overflow_callback+0x135/0x140
[26156.489341] [<ffffffff9877f237>] __perf_event_overflow+0x57/0x100
[26156.496256] [<ffffffff98787c24>] perf_event_overflow+0x14/0x20
[26156.502887] [<ffffffff9860a580>] intel_pmu_handle_irq+0x220/0x510
[26156.509813] [<ffffffff98d16031>] perf_event_nmi_handler+0x31/0x50
[26156.516738] [<ffffffff98d1790c>] nmi_handle.isra.0+0x8c/0x150
[26156.523273] [<ffffffff98d17be8>] do_nmi+0x218/0x460
[26156.528834] [<ffffffff98d16d79>] end_repeat_nmi+0x1e/0x7e
[26156.534980] [<ffffffff987089c0>] ? native_queued_spin_lock_slowpath+0x1d0/0x200
[26156.543268] [<ffffffff987089c0>] ? native_queued_spin_lock_slowpath+0x1d0/0x200
[26156.551556] [<ffffffff987089c0>] ? native_queued_spin_lock_slowpath+0x1d0/0x200
[26156.559842] <EOE> [<ffffffff98d083e4>] queued_spin_lock_slowpath+0xb/0xf
[26156.567555] [<ffffffff98d15690>] _raw_spin_lock+0x20/0x30
[26156.573696] [<ffffffffc08381a1>] bnxt_qplib_lock_buddy_cq+0x31/0x40 [bnxt_re]
[26156.581789] [<ffffffffc083bbaa>] bnxt_qplib_poll_cq+0x43a/0xf10 [bnxt_re]
[26156.589493] [<ffffffffc083239b>] bnxt_re_poll_cq+0x9b/0x760 [bnxt_re]

The issue happens if RQ poll_cq or SQ poll_cq or Async error event tries to
put the error QP in flush list. Since SQ and RQ of each error qp are added
to two different flush list, we need to protect it using locks of
corresponding CQs. Difference in order of acquiring the lock in
SQ poll_cq and RQ poll_cq can cause a hard lockup.

Revisits the locking strategy and removes the usage of qplib_cq.hwq.lock.
Instead of this lock, introduces qplib_cq.flush_lock to handle
addition/deletion of QPs in flush list. Also, always invoke the flush_lock
in order (SQ CQ lock first and then RQ CQ lock) to avoid any potential
deadlock.

Other than the poll_cq context, the movement of QP to/from flush list can
be done in modify_qp context or from an async error event from HW.
Synchronize these operations using the bnxt_re verbs layer CQ locks.
To achieve this, adds a call back to the HW abstraction layer(qplib) to
bnxt_re ib_verbs layer in case of async error event. Also, removes the
buddy cq functions as it is no longer required.

Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks

On 32-bit targets, we otherwise get a warning about an impossible constant
integer expression:

In file included from include/linux/kernel.h:11,
from include/linux/interrupt.h:6,
from drivers/infiniband/hw/bnxt_re/ib_verbs.c:39:
drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function 'bnxt_re_query_device':
include/linux/bitops.h:7:24: error: left shift count >= width of type [-Werror=shift-count-overflow]
#define BIT(nr) (1UL << (nr))
^~
drivers/infiniband/hw/bnxt_re/bnxt_re.h:61:34: note: in expansion of macro 'BIT'
#define BNXT_RE_MAX_MR_SIZE_HIGH BIT(39)
^~~
drivers/infiniband/hw/bnxt_re/bnxt_re.h:62:30: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE_HIGH'
#define BNXT_RE_MAX_MR_SIZE BNXT_RE_MAX_MR_SIZE_HIGH
^~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/bnxt_re/ib_verbs.c:149:25: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE'
ib_attr->max_mr_size = BNXT_RE_MAX_MR_SIZE;
^~~~~~~~~~~~~~~~~~~

Fixes: 872f3578241d ("RDMA/bnxt_re: Add support for MRs with Huge pages")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Unconditionly fence non wire memory operations

HW requires an unconditonal fence for all non-wire memory operations
through SQ. This guarantees the completions of these memory operations.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Synchronize destroy_qp with poll_cq

Avoid system crash when destroy_qp is invoked while
the driver is processing the poll_cq. Synchronize these
functions using the cq_lock.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Unpin SQ and RQ memory if QP create fails

Driver leaves the QP memory pinned if QP create command
fails from the FW. Avoids this scenario by adding a proper
exit path if the FW command fails.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Disable atomic capability on bnxt_re adapters

More testing needs to be done before enabling this feature.
Disabling the feature temporarily

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Fix static checker warning

If there is ever any error while creating srq->umem, we return that
error, we don't store it in srq->umem, so any check of srq->umem for
IS_ERR is pointless. Further, checking udata is unnecessary as
srq->umem is always either NULL or valid, without respect to udata.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Add SRQ support for Broadcom adapters

Shared receive queue (SRQ) is defined as a pool of
receive buffers shared among multiple QPs which belong
to same protection domain in a given process context.
Use of SRQ reduces the memory foot print of IB applications.

Broadcom adapters support SRQ, adding code-changes to enable
shared receive queue.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Add support for MRs with Huge pages

Depending on the OS page-table configurations, applications
may request MRs which has page size alignment other than 4K

Underlying provider driver needs to adjust its PBL boundaries
according to the incoming page boundaries in the PA list.

Adding a capability to register MRs having pages-sizes other
than 4K (Hugepages).

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Add support for query firmware version

The device now reports firmware version thus, removing
the hard coded values of the FW version string and
redundant fw_rev hook from sysfs. Adding code to query
firmware version from underlying device and report it
through the kernel verb to get firmware version string.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Enable RoCE on virtual functions

RoCE can be used by virtual functions (VFs) as well. Adding
code changes to allow resource reservation, initialization
and avail the resources to the RDMA applications running on
those VFs.

Currently, fifty percent of the total available resources
are reserved for PF and remaining are equally divided among
active VFs.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: report vlan_id and sl in qp1 recv completion

In a real RoCE v2 network it is possible to have two
Sections of network have same IP hence same gid. However
those may have different vlans. During connection resolution
it is important to report the actual vlan on which the
MAD packet was received instead of relying on other means
to resolve vlan-id. ib_find_gid_index should not be used
to resolve the vlan-id using sgid of the local system
where the packet was received.

Our device has the capability to report the actual VLAN-ID
in the GSI qp completions. Since we have the capability our
driver should move away from resolving the vlan-id with the
help of SGID at the destination port.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reported-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: synchronize poll_cq and req_notify_cq verbs

Synchronize poll_cq and req_notify_cq verbs using cq_lock,
instead of the lower level qplib->hwq.lock.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Flush CQ notification Work Queue before destroying QP

Destroy_qp shall wait for any outstanding CQ notification to be
flushed out before proceeding with QP destroy. Flushing the WQ
before destroying the QP.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

bnxt_re: changing the ip address shouldn't affect new connections

While adding a new gid, the driver currently does not return the context
back to the stack. A subsequent del_gid() (e.g, when ip address is changed)
doesn't find the right context in the driver and it ends up dropping that
request. This results in the HW caching a stale gid entry and traffic fails
because of that. Fix by returning the proper context in bnxt_re_add_gid().

Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Remove unused vlan_tag variable

The Broadcom driver produces the following compilation warning

drivers/infiniband/hw/bnxt_re/ib_verbs.c:
In function ‘bnxt_re_create_ah’:
drivers/infiniband/hw/bnxt_re/ib_verbs.c:668:6:
warning: variable ‘vlan_tag’ set but not used [-Wunused-but-set-variable]
u16 vlan_tag;

Let's remove it till vlan_tag will be implemented properly.

Cc: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB: Let ib_core resolve destination mac address

Since IB/core resolves the destination mac address for user and kernel
consumers, avoid resolving in multiple provider drivers.

Only ib_core resolves DMAC now, therefore resolve_eth_dmac is removed as
exported symbol.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Remove set-but-not-used variables

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

bnxt_re: Don't issue cmd to delete GID for QP1 GID entry before the QP is destroyed

FW needs the 0th GID Entry in the Table to be preserved before
it's corresponding QP1 is deleted, else it will fail the cmd.
Check for the same and return to prevent error msg being logged for
cmd failure.

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

bnxt_re: Fix memory leak in FRMR path

This patch fixes a memory leak issue when alloc_mr is used.
mr->pages and mr->npages are used only in alloc_mr path. mr->pages
is allocated when alloc_mr is called or in the case of FRMR, while
creating the MR. mr->npages is updated only when the MR created
is used i.e. after invoking map_mr_sg verb, before data transfer.
In the dereg_mr path, if mr->npages is 0, driver ends up not freeing
the memory created.
Removing the npages check from the dereg_mr path for kernel consumers.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

bnxt_re: Remove RTNL lock dependency in bnxt_re_query_port

When there is a NETDEV_UNREGISTER event, bnxt_re driver calls
ib_unregister_device() (RTNL lock held).
ib_unregister_device attempts to flush a worker queue scheduled by
ib_core and that queue might have a pending ib_query_port().
ib_query_port in turn calls bnxt_re_query_port(), which while querying the
link speed using ib_get_eth_speed(), tries to acquire the rtnl_lock() which
was already held by NETDEV_UNREGISTER.
Fixing the issue by removing the link speed query from bnxt_re_query_port()
Now the speed is queried post a successful ib_register_device or whenever
there is a NETDEV_CHANGE event.

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

bnxt_re: Fix compare and swap atomic operands

Driver must assign the user supplied compare/swap values in
the wqe to successfully complete the atomic compare and
swap operation.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

bnxt_re: Fix update of qplib_qp.mtu when modified

The MTU value in the qplib_qp.mtu should be
consistent with whatever mtu was set during
INIT to RTR.The Next PSN and number of packets
are calculated based on this member in the qplib_qp structure.

Signed-off-by: Narender Reddy <narender.reddy@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/bnxt_re: Fix frame stack compilation warning

Reduce stack size by dynamically allocating memory instead
of declaring large struct on the stack:

drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function ‘bnxt_re_query_qp’:
drivers/infiniband/hw/bnxt_re/ib_verbs.c:1600:1: warning: the frame size of 1216 bytes is larger than 1024 bytes [-Wframe-larger-than=]
}
^

Cc: Selvin Xavier <selvin.xavier@broadcom.com>
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: remove unnecessary call to memset

call to memset to assign 0 value immediately after allocating
memory with kzalloc is unnecesaary as kzalloc allocates the memory
filled with 0 value.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA: Fix return value check for ib_get_eth_speed()

ib_get_eth_speed() return 0 on success. Fixing the condition checking
and prevent reporting failure for query_port verb.

Fixes: d41861942fc5 ("Add generic function to extract IB speed from netdev")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Allocate multiple notification queues

Enables multiple Interrupt vectors. Driver is requesting the max
MSIX vectors based on the number of online cpus and creates upto
9 MSIx vectors (1 for control path and 8 for data path).
A tasklet is created for each of these vectors. NQs are assigned
to CQs in round robin fashion.
This patch also adds IRQ affinity hint for the MSIX vector of each NQ.

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: fix spelling mistake: "Deallocte" -> "Deallocate"

Trivial fix to spelling mistake in dev_err error message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Allow posting when QPs are in error

This patch allows driver to post send and receive
requests on QPs which are in error state.

Instead of flushing the QP in the context of polling
error CQEs, the QPs will be added to a flush list
maintained per CQ. QP state is moved to error.
QP is added to flush list if the user moves it
to error state using modify_qp also. After polling the HW
CQ in poll_cq routine, this flush list is traversed
and driver completes work requests on each QP in the flush
list, till the budget expires. The QP is moved out of
flush list during QP destroy or during modify_QP to RESET.

When ULPs post Work Requests while QP is in error state,
driver will store the ULP data and then increment the
QP producer s/w index, without ringing doorbell. It then
schedules a worker to invoke the CQ handler since the
interrupts wont be generated from the HW for this request.

Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Add generic function to extract IB speed from netdev

Logic of retrieving netdev speed from net_device and translating it to
IB speed is implemented in rxe, in usnic and in bnxt drivers.

Define new function which merges all.

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Christian Benvenuti <benve@cisco.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Delete unsupported modify_port function

There is no need to return always zero for function which is not
supported. The IB stack treats uninitialized ib_device->functions as
not implemented.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Fix the value reported for local ack delay

Local ack delay exposed by the driver is 0 which means infinite QP
timeout. Reporting the default value to 16 (approx 260ms)

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Report MISSED_EVENTS in req_notify_cq

While invoking the req_notify_cq hook, ULPs can request
whether the CQs have any CQEs pending. If CQEs are pending,
drivers can indicate it by returning 1 for req_notify_cq.
The stack will poll CQ again till CQ is empty.

This patch peeks the CQ for any valid entries and return accordingly.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Fix return value of poll routine

Fix the incorrect reporting of number of polled
entries by taking into account the max CQ depth
in the driver.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Enable atomics only if host bios supports

Driver shall check if the host system bios has enabled
Atomic operations capability in PCI Device Control 2
register of the pci-device. Expose the ATOMIC_HCA
flag only if the Atomic operations capability is set.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Fixed the max_rd_atomic support for initiator and destination QP

There's a couple of bugs in the support of max_rd_atomic and
max_dest_rd_atomic. In the modify_qp, if the requested max_rd_atomic,
which is the ORRQ size, is greater than what the chip can support,
then we have to cap the request to chip max as we can't have the HW
overflow the ORRQ. Capping the max_rd_atomic support internally is okay
to do as the remaining read/atomic WRs will still be sitting in the SQ.
However, for the max_dest_rd_atomic, the driver has to error out as
this dictates the IRRQ size and we can't control what the remote
side sends.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Report supported value to IB stack in query_device

- Report supported value for max_mr_size to IB stack in query_device.
Also, check and log if MR size requested by application in
reg_user_mr() is greater than value currently supported by driver.
- Report only 4K page size support for now
- Fix Max_QP value returned by ibv_devinfo -vv.
In case of PF, FW reserves 129 QPs for creating QP1s of VFs
and PF. So the max_qp value reported by FW for PF doesn'tt include
the QP1. Fixing this issue by adding 1 with the value reported
by FW.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Do not free the ctx_tbl entry if delete GID fails

This fix is added only to avoid system crash in some a
specific scenario. When bnxt_re driver is loaded and if
user tries to change interface mac address, delete GID
fails because QP1 is still associated with existing MAC
(default GID). If the above command fails GID tables are
not modified in the h/w or driver, but the GID context memory
is freed. Now, if the user changes the mac back to the original
value, another add_gid comes to the driver where the driver
reports that the GID is already present in its table
and tries to access the context which was already freed.

So, in this case, in order to avoid NULL pointer de-reference,
this patch removes the context memory free if delete_gid fails
and the same context memory is re-used in new add_gid.
Memory cleanup will be taken care during driver unload, while
deleting the GID table.

Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Free doorbell page index (DPI) during dealloc ucontext

The driver must free the DPI during the dealloc_ucontext
instead of freeing it during dealloc_pd. However, the DPI
allocation scheme remains unchanged.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: checking for NULL instead of IS_ERR()

bnxt_re_alloc_mw() doesn't return NULL, it returns error pointers.

Fixes: 9152e0b722b2 ("RDMA/bnxt_re: HW workarounds for handling specific conditions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Remove FMR support

Some issues observed with FMR implementation
while running stress traffic. So removing the
FMR verbs support for now.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Fix RQE posting logic

This patch adds code to ring RQ Doorbell aggressively
so that the adapter can DMA RQ buffers sooner, instead
of DMA all WQEs in the post_recv WR list together at the
end of the post_recv verb.
Also use spinlock to serialize RQ posting

Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Add HW workaround for avoiding stall for UD QPs

HW stalls out after 0x800000 WQEs are posted for UD QPs.
To workaround this problem, driver will send a modify_qp cmd
to the HW at around the halfway mark(0x400000) so that FW
can accordingly modify the QP context in the HW to prevent this
stall.
This workaround needs to be done for UD, QP1 and Raw Ethertype
packets. Added a counter to keep track of WQEs posted during post_send.

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Dereg MR in FW before freeing the fast_reg_page_list

If the host buffers are freed before destroying MR in HW,
HW could try accessing these buffers. This could cause a host
crash. Fixing the code to avoid this condition.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: HW workarounds for handling specific conditions

This patch implements the following HW workarounds

1. The SQ depth needs to be augmented by 128 + 1 to avoid running
into an Out of order CQE issue
2. Workaround to handle the problem where the HW fast path engine continues
to access DMA memory in retranmission mode even after the WQE has
already been completed. If the HW reports this condition, driver detects
it and posts a Fence WQE. The driver stops reporting the completions
to stack until it receives completion for Fence WQE.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Define 'ib' and 'roce' rdma_ah_attr types

rdma_ah_attr can now be either ib or roce allowing
core components to use one type or the other and also
to define attributes unique to a specific type. struct
ib_ah is also initialized with the type when its first
created. This ensures that calls such as modify_ah
dont modify the type of the address handle attribute.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Use rdma_ah_attr accessor functions

Modify core and driver components to use accessor functions
introduced to access individual fields of rdma_ah_attr

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Rename struct ib_ah_attr to rdma_ah_attr

This patch simply renames struct ib_ah_attr to
rdma_ah_attr as these fields specify attributes that are
not necessarily specific to IB.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB: Replace ib_umem page_size by page_shift

Size of pages are held by struct ib_umem in page_size field.

It is better to store it as an exponent, because page size by nature
is always power-of-two and used as a factor, divisor or ilog2's argument.

The conversion of page_size to be page_shift allows to have portable
code and avoid following error while compiling on ARM:

ERROR: "__aeabi_uldivmod" [drivers/infiniband/core/ib_core.ko] undefined!

CC: Selvin Xavier <selvin.xavier@broadcom.com>
CC: Steve Wise <swise@chelsio.com>
CC: Lijun Ou <oulijun@huawei.com>
CC: Shiraz Saleem <shiraz.saleem@intel.com>
CC: Adit Ranadive <aditr@vmware.com>
CC: Dennis Dalessandro <dennis.dalessandro@intel.com>
CC: Ram Amrani <Ram.Amrani@Cavium.com>
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Ram Amrani <Ram.Amrani@cavium.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Use IS_ERR_OR_NULL where appropriate

Constructs such as if (ptr && !IS_ERR(ptr)) can be shorted to
just !IS_ERR_OR_NULL(ptr) instead. Make substitutions in the bnxt_re
driver where appropriate.

Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: remove redundant initialization of rc to zero

rc is initialized to zero but is then updated by calls to
bnxt_qplib_free_fast_reg_page_list and/or bnxt_qpliob_free_mrw
so the initialization is redundant and can be removed.

Detected with CoverityScan, CID#1408448 ("Unused Value")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Add bnxt_re RoCE driver

This patch introduces the RoCE driver for the Broadcom
NetXtreme-E 10/25/40/50G RoCE HCAs.

The RoCE driver is a two part driver that relies on the parent
bnxt_en NIC driver to operate. The changes needed in the bnxt_en
driver have already been incorporated via Dave Miller's net tree
into the mainline kernel.

The vendor official git repository for this driver is available
on github as:
https://github.com/Broadcom/linux-rdma-nxt/

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>