RDMA: Support more than 255 rdma ports

Current code uses many different types when dealing with a port of a RDMA
device: u8, unsigned int and u32. Switch to u32 to clean up the logic.

This allows us to make (at least) the core view consistent and use the
same type. Unfortunately not all places can be converted. Many uverbs
functions expect port to be u8 so keep those places in order not to break
UAPIs. HW/Spec defined values must also not be changed.

With the switch to u32 we now can support devices with more than 255
ports. U32_MAX is reserved to make control logic a bit easier to deal
with. As a device with U32_MAX ports probably isn't going to happen any
time soon this seems like a non issue.

When a device with more than 255 ports is created uverbs will report the
RDMA device as having 255 ports as this is the max currently supported.

The verbs interface is not changed yet because the IBTA spec limits the
port size in too many places to be u8 and all applications that relies in
verbs won't be able to cope with this change. At this stage, we are
extending the interfaces that are using vendor channel solely

Once the limitation is lifted mlx5 in switchdev mode will be able to have
thousands of SFs created by the device. As the only instance of an RDMA
device that reports more than 255 ports will be a representor device and
it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other
ULPs aren't effected by this change and their sysfs/interfaces that are
exposes to userspace can remain unchanged.

While here cleanup some alignment issues and remove unneeded sanity
checks (mainly in rdmavt),

Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

IB: Add rdma_cap_ib_switch helper and use where appropriate

Persuant to Liran's comments on node_type on linux-rdma
mailing list:

In an effort to reform the RDMA core and ULPs to minimize use of
node_type in struct ib_device, an additional bit is added to
struct ib_device for is_switch (IB switch). This is needed
to be initialized by any IB switch device driver. This is a
NEW requirement on such device drivers which are all
"out of tree".

In addition, an ib_switch helper was added to ib_verbs.h
based on the is_switch device bit rather than node_type
(although those should be consistent).

The RDMA core (MAD, SMI, agent, sa_query, multicast, sysfs)
as well as (IPoIB and SRP) ULPs are updated where
appropriate to use this new helper. In some cases,
the helper is now used under the covers of using
rdma_[start end]_port rather than the open coding
previously used.

Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mad: Add partial Intel OPA MAD support

Add OPA SMP processing functionality.

Define the new OPA SMP format, create support functions for this format using
the previously defined helper functions as appropriate.

These functions are defined in this patch and used in the final OPA MAD support
patch.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mad: Create a generic helper for DR forwarding checks

IB and OPA SMPs share the same processing algorithm but have different header
formats and permissive LID detection.

Add a helper function which is generic to processing the DR forwarding checks which
can be used by both IB and OPA SMP code.

Use this function in the current IB function smi_check_forward_dr_smp.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mad: Create a generic helper for DR SMP Recv processing

IB and OPA SMPs share the same processing algorithm but have different header
formats and permissive LID detection.

Add a helper function which is generic to processing DR SMP Recv messages which
can be used by both IB and OPA SMP code.

Use this function in the current IB function smi_handle_dr_smp_recv.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mad: Create a generic helper for DR SMP Send processing

IB and OPA SMPs share the same processing algorithm but have different header
formats and permissive LID detection.

Add a helper function which is generic to processing DR SMP Send messages which
can be used by both IB and OPA SMP code.

Use this function in the current IB function smi_handle_dr_smp_send.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mad: Clean up comments in smi.c

Return values of 0 do not make sense for functions which return enum
smi_action

Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mad: Check hop count field in directed route MAD to avoid array overflow

The hop count field in a directed route MAD is only allowed to be in the
range 0 to 63 (by spec). Check that this really is the case to avoid
accessing outside the bounds of the hop array.

Reported-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

IB/mad: Enhance SMI for switch support

Extend the SMI with switch (intermediate hop) support. Care has been
taken to ensure that the CA (and router) code paths are changed as
little as possible.

Signed-off-by: Suresh Shelvapille <suri@baymicrosystems.com>
Signed-off-by: Hal Rosenstock <halr@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

IB/mad: Change SMI to use enums rather than magic return codes

Clarify code by changing return values from SMI functions to named
enum values instead of magic 0/1 values.

Signed-off-by: Hal Rosenstock <halr@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

RDMA: iWARP Core Changes.

Modifications to the existing rdma header files, core files, drivers,
and ulp files to support iWARP, including:
- Hook iWARP CM into the build system and use it in rdma_cm.
- Convert enum ib_node_type to enum rdma_node_type, which includes
the possibility of RDMA_NODE_RNIC, and update everything for this.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

[PATCH] IB: move include files to include/rdma

Move the InfiniBand headers from drivers/infiniband/include to include/rdma.
This allows InfiniBand-using code to live elsewhere, and lets us remove the
ugly EXTRA_CFLAGS include path from the InfiniBand Makefiles.

Signed-off-by: Roland Dreier <rolandd@cisco.com>

[PATCH] IB: Add copyright notices

Make some lawyers happy and add copyright notices for people who
forgot to include them when they actually touched the code.

Signed-off-by: Roland Dreier <rolandd@cisco.com>

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!