RDMA/device: Fix a race between mad_client and cm_client init

The mad_client will be initialized in enable_device_and_get(), while the
devices_rwsem will be downgraded to a read semaphore. There is a window
that leads to the failed initialization for cm_client, since it can not
get matched mad port from ib_mad_port_list, and the matched mad port will
be added to the list after that.

mad_client | cm_client
------------------|--------------------------------------------------------
ib_register_device|
enable_device_and_get
down_write(&devices_rwsem)
xa_set_mark(&devices, DEVICE_REGISTERED)
downgrade_write(&devices_rwsem)
|
|ib_cm_init
|ib_register_client(&cm_client)
|down_read(&devices_rwsem)
|xa_for_each_marked (&devices, DEVICE_REGISTERED)
|add_client_context
|cm_add_one
|ib_register_mad_agent
|ib_get_mad_port
|__ib_get_mad_port
|list_for_each_entry(entry, &ib_mad_port_list, port_list)
|return NULL
|up_read(&devices_rwsem)
|
add_client_context|
ib_mad_init_device|
ib_mad_port_open |
list_add_tail(&port_priv->port_list, &ib_mad_port_list)
up_read(&devices_rwsem)
|

Fix it by using down_write(&devices_rwsem) in ib_register_client().

Fixes: d0899892edd0 ("RDMA/device: Provide APIs from the core code to help unregistration")
Link: https://lore.kernel.org/r/20240203035313.98991-1-lishifeng@sangfor.com.cn
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/core: Add support to dump SRQ resource in RAW format

Add support to dump SRQ resource in raw format. It enable drivers to
return the entire device specific SRQ context without setting each
field separately.

Example:
$ rdma res show srq -r
dev hns3 149000...

$ rdma res show srq -j -r
[{"ifindex":0,"ifname":"hns3","data":[149,0,0,...]}]

Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Link: https://lore.kernel.org/r/20230918131110.3987498-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/core: Add dedicated SRQ resource tracker function

Add a dedicated callback function for SRQ resource tracker.

Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Link: https://lore.kernel.org/r/20230918131110.3987498-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/core: Use size_{add,sub,mul}() in calls to struct_size()

If, for any reason, the open-coded arithmetic causes a wraparound,
the protection that `struct_size()` provides against potential integer
overflows is defeated. Fix this by hardening calls to `struct_size()`
with `size_add()`, `size_sub()` and `size_mul()`.

Fixes: 467f432a521a ("RDMA/core: Split port and device counter sysfs attributes")
Fixes: a4676388e2e2 ("RDMA/core: Simplify how the gid_attrs sysfs is created")
Fixes: e9dd5daf884c ("IB/umad: Refactor code to use cdev_device_add()")
Fixes: 324e227ea7c9 ("RDMA/device: Add ib_device_get_by_netdev()")
Fixes: 5aad26a7eac5 ("IB/core: Use struct_size() in kzalloc()")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZQdt4NsJFwwOYxUR@work
Signed-off-by: Leon Romanovsky <leon@kernel.org>

driver core: make struct class.dev_uevent() take a const *

The dev_uevent() in struct class should not be modifying the device that
is passed into it, so mark it as a const * and propagate the function
signature changes out into all relevant subsystems that use this
callback.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Russ Weight <russell.h.weight@intel.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Raed Salem <raeds@nvidia.com>
Cc: Chen Zhongjin <chenzhongjin@huawei.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Avihai Horon <avihaih@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Jakob Koschel <jakobkoschel@gmail.com>
Cc: Antoine Tenart <atenart@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Wang Yufen <wangyufen@huawei.com>
Cc: linux-block@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Cc: linux-pm@vger.kernel.org
Cc: linux-rdma@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20221123122523.1332370-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: class: make namespace and get_ownership take const *

The callbacks in struct class namespace() and get_ownership() do not
modify the struct device passed to them, so mark the pointer as constant
and fix up all callbacks in the kernel to have the correct function
signature.

This helps make it more obvious what calls and callbacks do, and do not,
modify structures passed to them.

Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20221001165426.2690912-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA: Add missed netdev_put() for the netdevice_tracker

The netdev core will detect if any untracked puts are done on tracked
pointers and throw refcount warnings:

refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 1 PID: 33 at lib/refcount.c:31 refcount_warn_saturate+0x1d7/0x1f0 lib/refcount.c:31
Modules linked in:
CPU: 1 PID: 33 Comm: kworker/u4:2 Not tainted 6.1.0-rc8-next-20221207-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: ib-unreg-wq ib_unregister_work
RIP: 0010:refcount_warn_saturate+0x1d7/0x1f0 lib/refcount.c:31
Code: 05 5a 60 51 0a 01 e8 35 0a b5 05 0f 0b e9 d3 fe ff ff e8 6c 9b 75 fd 48 c7 c7 c0 6d a6 8a c6 05 37 60 51 0a 01 e8 16 0a b5 05 <0f> 0b e9 b4 fe
+ff ff 48 89 ef e8 5a b5 c3 fd e9 5c fe ff ff 0f 1f
RSP: 0018:ffffc90000aa7b30 EFLAGS: 00010082
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff8880172f9d40 RSI: ffffffff8166b1dc RDI: fffff52000154f58
RBP: ffff88807906c600 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000080000001 R11: 0000000000000000 R12: 1ffff92000154f6b
R13: 0000000000000000 R14: ffff88807906c600 R15: ffff888046894000
FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe350a8ff8 CR3: 000000007a9e7000 CR4: 00000000003526e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__refcount_dec include/linux/refcount.h:344 [inline]
refcount_dec include/linux/refcount.h:359 [inline]
ref_tracker_free+0x539/0x6b0 lib/ref_tracker.c:118
netdev_tracker_free include/linux/netdevice.h:4039 [inline]
netdev_put include/linux/netdevice.h:4056 [inline]
dev_put include/linux/netdevice.h:4082 [inline]
free_netdevs+0x1f8/0x470 drivers/infiniband/core/device.c:2204
__ib_unregister_device+0xa0/0x1a0 drivers/infiniband/core/device.c:1478
ib_unregister_work+0x19/0x30 drivers/infiniband/core/device.c:1586
process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
worker_thread+0x669/0x1090 kernel/workqueue.c:2436
kthread+0x2e8/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

So change the missed dev_put for pdata->netdev to also follow the tracker.

Fixes: 09f530f0c6d6 ("RDMA: Add netdevice_tracker to ib_device_set_netdev()")
Reported-by: syzbot+3fd8326d9a0812d19218@syzkaller.appspotmail.com
Reported-by: syzbot+a1ed8ffe3121380cd5dd@syzkaller.appspotmail.com
Reported-by: syzbot+8d0a099c8a6d1e4e601c@syzkaller.appspotmail.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-e99919867b8d+1e2-netdev_tracker2_jgg@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA: Add netdevice_tracker to ib_device_set_netdev()

This will cause an informative backtrace to print if the user of
ib_device_set_netdev() isn't careful about tearing down the ibdevice
before its the netdevice parent is destroyed. Such as like this:

unregister_netdevice: waiting for vlan0 to become free. Usage count = 2
leaked reference.
ib_device_set_netdev+0x266/0x730
siw_newlink+0x4e0/0xfd0
nldev_newlink+0x35c/0x5c0
rdma_nl_rcv_msg+0x36d/0x690
rdma_nl_rcv+0x2ee/0x430
netlink_unicast+0x543/0x7f0
netlink_sendmsg+0x918/0xe20
sock_sendmsg+0xcf/0x120
____sys_sendmsg+0x70d/0x8b0
___sys_sendmsg+0x11d/0x1b0
__sys_sendmsg+0xfa/0x1d0
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd

This will help debug the issues syzkaller is seeing.

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-a7c81b3842ce+e5-netdev_tracker_jgg@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/core: Fix order of nldev_exit call

Create symmetrical exit flow by calling to nldev_exit() after
call to rdma_nl_unregister(RDMA_NL_LS).

Fixes: 6c80b41abe22 ("RDMA/netlink: Add nldev initialization flows")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/64e676774a53a406f4cde265d5a4cfd6b8e97df9.1666683334.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/core: Fix null-ptr-deref in ib_core_cleanup()

KASAN reported a null-ptr-deref error:

KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
CPU: 1 PID: 379
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:destroy_workqueue+0x2f/0x740
RSP: 0018:ffff888016137df8 EFLAGS: 00000202
...
Call Trace:
ib_core_cleanup+0xa/0xa1 [ib_core]
__do_sys_delete_module.constprop.0+0x34f/0x5b0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fa1a0d221b7
...

It is because the fail of roce_gid_mgmt_init() is ignored:

ib_core_init()
roce_gid_mgmt_init()
gid_cache_wq = alloc_ordered_workqueue # fail
...
ib_core_cleanup()
roce_gid_mgmt_cleanup()
destroy_workqueue(gid_cache_wq)
# destroy an unallocated wq

Fix this by catching the fail of roce_gid_mgmt_init() in ib_core_init().

Fixes: 03db3a2d81e6 ("IB/core: Add RoCE GID table management")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221025024146.109137-1-chenzhongjin@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

IB: move from strlcpy with unused retval to strscpy

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Link: https://lore.kernel.org/r/20220818210018.6841-1-wsa+renesas@sang-engineering.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

RDMA/core: Avoid flush_workqueue(system_unbound_wq) usage

Flushing system-wide workqueues is dangerous and will be forbidden.
Replace system_unbound_wq with local ib_unreg_wq.

Link: https://lore.kernel.org/r/252cefb0-a400-83f6-2032-333d69f52c1b@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/core: Delete IPsec flow action logic from the core

The removal of mlx5 flow steering logic, left the kernel without any RDMA
drivers that implements flow action callbacks supplied by RDMA/core. Any
user access to them caused to EOPNOTSUPP error, which can be achieved by
simply removing ioctl implementation.

Link: https://lore.kernel.org/r/a638e376314a2eb1c66f597c0bbeeab2e5de7faf.1649232994.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

RDMA/core: Let ib_find_gid() continue search even after empty entry

Currently, ib_find_gid() will stop searching after encountering the first
empty GID table entry. This behavior is wrong since neither IB nor RoCE
spec enforce tightly packed GID tables.

For example, when a valid GID entry exists at index N, and if a GID entry
is empty at index N-1, ib_find_gid() will fail to find the valid entry.

Fix it by making ib_find_gid() continue searching even after encountering
missing entries.

Fixes: 5eb620c81ce3 ("IB/core: Add helpers for uncached GID and P_Key searches")
Link: https://lore.kernel.org/r/e55d331b96cecfc2cf19803d16e7109ea966882d.1639055490.git.leonro@nvidia.com
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/counter: Add optional counter support

An optional counter is a driver-specific counter that may be dynamically
enabled/disabled. This enhancement allows drivers to expose counters
which are, for example, mutually exclusive and cannot be enabled at the
same time, counters that might degrades performance, optional debug
counters, etc.

Optional counters are marked with IB_STAT_FLAG_OPTIONAL flag. They are not
exported in sysfs, and must be at the end of all stats, otherwise the
attr->show() in sysfs would get wrong indexes for hwcounters that are
behind optional counters.

Link: https://lore.kernel.org/r/20211008122439.166063-7-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Neta Ostrovsky <netao@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Globally allocate and release QP memory

Convert QP object to follow IB/core general allocation scheme. That
change allows us to make sure that restrack properly kref the memory.

Link: https://lore.kernel.org/r/48e767124758aeecc433360ddd85eaa6325b34d9.1627040189.git.leonro@nvidia.com
Reviewed-by: Gal Pressman <galpress@amazon.com> #efa
Tested-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> #rdma and core
Tested-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

IB/core: Read subnet_prefix in ib_query_port via cache.

ib_query_port() calls device->ops.query_port() to get the port
attributes. The method of querying is device driver specific. The same
function calls device->ops.query_gid() to get the GID and extract the
subnet_prefix (gid_prefix).

The GID and subnet_prefix are stored in a cache. But they do not get
read from the cache if the device is an Infiniband device. The
following change takes advantage of the cached subnet_prefix.
Testing with RDBMS has shown a significant improvement in performance
with this change.

Link: https://lore.kernel.org/r/20210712122625.1147-4-anand.a.khoje@oracle.com
Signed-off-by: Anand Khoje <anand.a.khoje@oracle.com>
Signed-off-by: Haakon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

IB/core: Shifting initialization of device->cache_lock

The lock cache_lock of struct ib_device is initialized in function
ib_cache_setup_one(). This is much later than the device initialization in
_ib_alloc_device().

This change shifts initialization of cache_lock in _ib_alloc_device().

Link: https://lore.kernel.org/r/20210712122625.1147-3-anand.a.khoje@oracle.com
Suggested-by: Haakon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Anand Khoje <anand.a.khoje@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

IB/core: Removed port validity check from ib_get_cached_subnet_prefix

Removed port validity check from ib_get_cached_subnet_prefix() as this
check is not needed because "port_num" is valid.

Link: https://lore.kernel.org/r/20210616154509.1047-2-anand.a.khoje@oracle.com
Suggested-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Anand Khoje <anand.a.khoje@oracle.com>
Signed-off-by: Haakon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Remove rdma_set_device_sysfs_group()

The driver's device group can be specified as part of the ops structure
like the device's port group. No need for the complicated API.

Link: https://lore.kernel.org/r/8964785a34fd3a29ff5b6693493f575b717e594d.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/core: Allow port_groups to be used with namespaces

Now that the port_groups data is being destroyed and managed by the core
code this restriction is no longer needed. All the ib_port_attrs are
compatible with the core's sysfs lifecycle.

When the main device is destroyed and moved to another namespace the
driver's port sysfs can be created/destroyed as well due to it now being a
simple attribute list.

Link: https://lore.kernel.org/r/afd8b676eace2821692d44489ff71856277c48d1.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Change ops->init_port to ops->port_groups

init_port was only being used to register sysfs attributes against the
port kobject. Now that all users are creating static attribute_group's we
can simply set the attribute_group list in the ops and the core code can
just handle it directly.

This makes all the sysfs management quite straightforward and prevents any
driver from abusing the naked port kobject in future because no driver
code can access it.

Link: https://lore.kernel.org/r/114f68f3d921460eafe14cea5a80ca65d81729c3.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/core: Create the device hw_counters through the normal groups mechanism

Instead of calling device_add_groups() add the group to the existing
groups array which is managed through device_add().

This requires setting up the hw_counters before device_add(), so it gets
split up from the already split port sysfs flow.

Move all the memory freeing to the release function.

Link: https://lore.kernel.org/r/666250d937b64f6fdf45da9e2dc0b6e5e4f7abd8.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Split the alloc_hw_stats() ops to port and device variants

This is being used to implement both the port and device global stats,
which is causing some confusion in the drivers. For instance EFA and i40iw
both seem to be misusing the device stats.

Split it into two ops so drivers that don't support one or the other can
leave the op NULL'd, making the calling code a little simpler to
understand.

Link: https://lore.kernel.org/r/1955c154197b2a159adc2dc97266ddc74afe420c.1623427137.git.leonro@nvidia.com
Tested-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Support more than 255 rdma ports

Current code uses many different types when dealing with a port of a RDMA
device: u8, unsigned int and u32. Switch to u32 to clean up the logic.

This allows us to make (at least) the core view consistent and use the
same type. Unfortunately not all places can be converted. Many uverbs
functions expect port to be u8 so keep those places in order not to break
UAPIs. HW/Spec defined values must also not be changed.

With the switch to u32 we now can support devices with more than 255
ports. U32_MAX is reserved to make control logic a bit easier to deal
with. As a device with U32_MAX ports probably isn't going to happen any
time soon this seems like a non issue.

When a device with more than 255 ports is created uverbs will report the
RDMA device as having 255 ports as this is the max currently supported.

The verbs interface is not changed yet because the IBTA spec limits the
port size in too many places to be u8 and all applications that relies in
verbs won't be able to cope with this change. At this stage, we are
extending the interfaces that are using vendor channel solely

Once the limitation is lifted mlx5 in switchdev mode will be able to have
thousands of SFs created by the device. As the only instance of an RDMA
device that reports more than 255 ports will be a representor device and
it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other
ULPs aren't effected by this change and their sysfs/interfaces that are
exposes to userspace can remain unchanged.

While here cleanup some alignment issues and remove unneeded sanity
checks (mainly in rdmavt),

Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/core: Remove unused req_ncomp_notif device operation

The request_ncomp_notif device operation and function are unused, remove
them.

Link: https://lore.kernel.org/r/20210311150921.23726-1-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/core: Fix kernel doc warnings for ib_port_immutable_read()

drivers/infiniband/core/device.c:859: warning: Function parameter or member 'dev' not described in 'ib_port_immutable_read'
drivers/infiniband/core/device.c:859: warning: Function parameter or member 'port' not described in 'ib_port_immutable_read'

Fixes: 7416790e2245 ("RDMA/core: Introduce and use API to read port immutable data")
Link: https://lore.kernel.org/r/20210210151421.1108809-1-leon@kernel.org
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/core: Introduce and use API to read port immutable data

Currently mlx5 driver caches port GID table length for 2 ports. It is
also cached by IB core as port immutable data.

When mlx5 representor ports are present, which are usually more than 2,
invalid access to port_caps array can happen while validating the GID
table length which is only for 2 ports.

To avoid this, take help of the IB cores port immutable data by exposing
an API to read the port immutable fields.

Remove mlx5 driver's internal cache, thereby reduce code and data.

Link: https://lore.kernel.org/r/20210203130133.4057329-5-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/core: Add device method for registering dma-buf based memory region

Dma-buf based memory region requires one extra parameter and is processed
quite differently. Adding a separate method allows clean separation from
regular memory regions.

Link: https://lore.kernel.org/r/1608067636-98073-3-git-send-email-jianxin.xiong@intel.com
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/core: device: Fix formatting in worthy kernel-doc header and demote another

Fixes the following W=1 kernel build warning(s):

drivers/infiniband/core/device.c:1896: warning: Function parameter or member 'ibdev' not described in 'ib_get_client_nl_info'
drivers/infiniband/core/device.c:1896: warning: Function parameter or member 'client_name' not described in 'ib_get_client_nl_info'
drivers/infiniband/core/device.c:1896: warning: Function parameter or member 'res' not described in 'ib_get_client_nl_info'
drivers/infiniband/core/device.c:2328: warning: Function parameter or member 'nldev_cb' not described in 'ib_enum_all_devs'
drivers/infiniband/core/device.c:2328: warning: Function parameter or member 'skb' not described in 'ib_enum_all_devs'

Link: https://lore.kernel.org/r/20210118223929.512175-3-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/core: Do not indicate device ready when device enablement fails

In procedure ib_register_device, procedure kobject_uevent is called
(advertising that the device is ready for userspace usage) even when
device_enable_and_get() returned an error.

As a result, various RDMA modules attempted to register for the device
even while the device driver was preparing to unregister the device.

Fix this by advertising the device availability only after enabling the
device succeeds.

Fixes: e7a5b4aafd82 ("RDMA/device: Don't fire uevent before device is fully initialized")
Link: https://lore.kernel.org/r/20201208073545.9723-3-leon@kernel.org
Suggested-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/core: Clean up cq pool mechanism

The CQ pool mechanism had two problems:

1. The CQ pool lists were uninitialized in the device registration error
flow. As a result, all the list pointers remained NULL. This caused
the kernel to crash (in procedure ib_cq_pool_destroy) when that error
flow was taken (and unregister called). The stack trace snippet:

BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0×0000) ? not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
. . .
RIP: 0010:ib_cq_pool_destroy+0x1b/0×70 [ib_core]
. . .
Call Trace:
disable_device+0x9f/0×130 [ib_core]
__ib_unregister_device+0x35/0×90 [ib_core]
ib_register_device+0x529/0×610 [ib_core]
__mlx5_ib_add+0x3a/0×70 [mlx5_ib]
mlx5_add_device+0x87/0×1c0 [mlx5_core]
mlx5_register_interface+0x74/0xc0 [mlx5_core]
do_one_initcall+0x4b/0×1f4
do_init_module+0x5a/0×223
load_module+0x1938/0×1d40

2. At device unregister, when cleaning up the cq pool, the cq's in the
pool lists were freed, but the cq entries were left in the list.

The fix for the first issue is to initialize the cq pool lists when the
ib_device structure is allocated for a new device (in procedure
_ib_alloc_device).

The fix for the second problem is to delete cq entries from the pool lists
when cleaning up the cq pool.

In addition, procedure ib_cq_pool_destroy() is renamed to the more
appropriate name ib_cq_pool_cleanup().

Fixes: 4aa1615268a8 ("RDMA/core: Fix ordering of CQ pool destruction")
Link: https://lore.kernel.org/r/20201208073545.9723-2-leon@kernel.org
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/core: remove use of dma_virt_ops

Use the ib_dma_* helpers to skip the DMA translation instead. This
removes the last user if dma_virt_ops and keeps the weird layering
violation inside the RDMA core instead of burderning the DMA mapping
subsystems with it. This also means the software RDMA drivers now don't
have to mess with DMA parameters that are not relevant to them at all, and
that in the future we can use PCI P2P transfers even for software RDMA, as
there is no first fake layer of DMA mapping that the P2P DMA support.

Link: https://lore.kernel.org/r/20201106181941.1878556-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Remove AH from uverbs_cmd_mask

Drivers that need a uverbs AH should instead set the create_user_ah() op
similar to reg_user_mr(). MODIFY_AH and QUERY_AH cmds were never
implemented so are just deleted.

Link: https://lore.kernel.org/r/11-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/core Remove uverbs_ex_cmd_mask

No driver sets it, and the core code sets a maximum mask, simply remove
it.

Disabled operations are now handled either by having a NULL ops pointer,
or by having the common driver callbacks check for unsupported extended
attributes.

Link: https://lore.kernel.org/r/9-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Check create_flags during create_qp

Each driver should check that the QP attrs create_flags is supported.
Unfortuantely when create_flags was added to the QP attrs the drivers were
not updated. uverbs_ex_cmd_mask was used to block it - even though kernel
drivers use these flags too.

Check that flags is zero in all drivers that don't use it, remove
IB_USER_VERBS_EX_CMD_CREATE_QP from uverbs_ex_cmd_mask. Fix the error code
to be EOPNOTSUPP.

Link: https://lore.kernel.org/r/8-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Check flags during create_cq

Each driver should check that the CQ attrs is supported. Unfortuantely
when flags was added to the CQ attrs the drivers were not updated,
uverbs_ex_cmd_mask was used to block it. This was missed when create CQ
was converted to ioctl, so non-zero flags could have been passed into
drivers.

Check that flags is zero in all drivers that don't use it, remove
IB_USER_VERBS_EX_CMD_CREATE_CQ from uverbs_ex_cmd_mask.

Fixes: 41b2a71fc848 ("IB/uverbs: Move ioctl path of create_cq and destroy_cq to a new file")
Link: https://lore.kernel.org/r/7-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Check attr_mask during modify_qp

Each driver should check that it can support the provided attr_mask during
modify_qp. IB_USER_VERBS_EX_CMD_MODIFY_QP was being used to block
modify_qp_ex because the driver didn't check RATE_LIMIT.

Link: https://lore.kernel.org/r/6-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Check srq_type during create_srq

uverbs was blocking srq_types the driver doesn't support based on the
CREATE_XSRQ cmd_mask. Fix all drivers to check for supported srq_types
during create_srq and move CREATE_XSRQ to the core code.

Link: https://lore.kernel.org/r/5-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Move more uverbs_cmd_mask settings to the core

These functions all depend on the driver providing a specific op:

- REREG_MR is rereg_user_mr(). bnxt_re set this without providing the op
- ATTACH/DEATCH_MCAST is attach_mcast()/detach_mcast(). usnic set this
without providing the op
- OPEN_QP doesn't involve the driver but requires a XRCD. qedr provides
xrcd but forgot to set it, usnic doesn't provide XRCD but set it anyhow.
- OPEN/CLOSE_XRCD are the ops alloc_xrcd()/dealloc_xrcd()
- CREATE_SRQ/DESTROY_SRQ are the ops create_srq()/destroy_srq()
- QUERY/MODIFY_SRQ is op query_srq()/modify_srq(). hns sets this but
sometimes supplies a NULL op.
- RESIZE_CQ is op resize_cq(). bnxt_re sets this boes doesn't supply an op
- ALLOC/DEALLOC_MW is alloc_mw()/dealloc_mw(). cxgb4 provided an
(now deleted) implementation but no userspace

All drivers were checked that no drivers provide the op without also
setting uverbs_cmd_mask so this should have no functional change.

Link: https://lore.kernel.org/r/4-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Remove elements in uverbs_cmd_mask that all drivers set

This is a step toward eliminating uverbs_cmd_mask. Preset this list in the
core code. Only the op reg_user_mr wasn't already being required from the
drivers.

Link: https://lore.kernel.org/r/3-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Remove uverbs_ex_cmd_mask values that are linked to functions

Since a while now the uverbs layer checks if the driver implements a
function before allowing the ucmd to proceed. This largely obsoletes the
cmd_mask stuff, but there is some tricky bits in drivers preventing it
from being removed.

Remove the easy elements of uverbs_ex_cmd_mask by pre-setting them in the
core code. These are triggered soley based on the related ops function
pointer.

query_device_ex is not triggered based on an op, but all drivers already
implement something compatible with the extension, so enable it globally
too.

Link: https://lore.kernel.org/r/2-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Explicitly pass in the dma_device to ib_register_device

The code in setup_dma_device has become rather convoluted, move all of
this to the drivers. Drives now pass in a DMA capable struct device which
will be used to setup DMA, or drivers must fully configure the ibdev for
DMA and pass in NULL.

Other than setting the masks in rvt all drivers were doing this already
anyhow.

mthca, mlx4 and mlx5 were already setting up maximum DMA segment size for
DMA based on their hardweare limits in:
__mthca_init_one()
dma_set_max_seg_size (1G)

__mlx4_init_one()
dma_set_max_seg_size (1G)

mlx5_pci_init()
set_dma_caps()
dma_set_max_seg_size (2G)

Other non software drivers (except usnic) were extended to UINT_MAX [1, 2]
instead of 2G as was before.

[1] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/
[2] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/

Link: https://lore.kernel.org/r/20201008082752.275846-1-leon@kernel.org
Link: https://lore.kernel.org/r/6b2ed339933d066622d5715903870676d8cc523a.1602590106.git.mchehab+huawei@kernel.org
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Convert RWQ table logic to ib_core allocation scheme

Move struct ib_rwq_ind_table allocation to ib_core.

Link: https://lore.kernel.org/r/20200902081623.746359-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Clean MW allocation and free flows

Move allocation and destruction of memory windows under ib_core
responsibility and clean drivers to ensure that no updates to MW
ib_core structures are done in driver layer.

Link: https://lore.kernel.org/r/20200902081623.746359-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/core: Fix ordering of CQ pool destruction

rxe will hold a refcount on the IB device as long as CQ objects exist,
this causes destruction of a rxe device to hang if the CQ pool has any
cached CQs since they are being destroyed after the refcount must go to
zero.

Treat the CQ pool like a client and create/destroy it before/after all
other clients. No users of CQ pool can exist past a client remove call.

Link: https://lore.kernel.org/r/e8a240aa-9e9b-3dca-062f-9130b787f29b@acm.org
Fixes: c7ff819aefea ("RDMA/core: Introduce shared CQ pool API")
Tested-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/core: Fix spelling mistake "Could't" -> "Couldn't"

There is a spelling mistake in a pr_warn message. Fix it.

Link: https://lore.kernel.org/r/20200810075824.46770-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/core: Remove query_pkey from the mandatory ops

The query_pkey() isn't mandatory for the iwarp providers, so remove this
requirement from the RDMA core.

Link: https://lore.kernel.org/r/20200714183414.61069-4-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

dma-mapping: make support for dma ops optional

Avoid the overhead of the dma ops support for tiny builds that only
use the direct mapping.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>

RDMA: Move XRCD to be under ib_core responsibility

Update the code to allocate and free ib_xrcd structure in the
ib_core instead of inside drivers.

Link: https://lore.kernel.org/r/20200630101855.368895-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/core: Create and destroy counters in the ib_core

Move allocation and destruction of counters under ib_core responsibility

Link: https://lore.kernel.org/r/20200630101855.368895-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

IB/uverbs: Expose UAPI to query ucontext

Expose UAPI to query ucontext, this will let user space application that
didn't allocate the ucontext but has access to by owning the matching
command FD to retrieve the ucontext information.

Link: https://lore.kernel.org/r/20200630093916.332097-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/core: Fix bogus WARN_ON during ib_unregister_device_queued()

ib_unregister_device_queued() can only be used by drivers using the new
dealloc_device callback flow, and it has a safety WARN_ON to ensure
drivers are using it properly.

However, if unregister and register are raced there is a special
destruction path that maintains the uniform error handling semantic of
'caller does ib_dealloc_device() on failure'. This requires disabling the
dealloc_device callback which triggers the WARN_ON.

Instead of using NULL to disable the callback use a special function
pointer so the WARN_ON does not trigger.

Fixes: d0899892edd0 ("RDMA/device: Provide APIs from the core code to help unregistration")
Link: https://lore.kernel.org/r/0-v1-a36d512e0a99+762-syz_dealloc_driver_jgg@nvidia.com
Reported-by: syzbot+4088ed905e4ae2b0e13b@syzkaller.appspotmail.com
Suggested-by: Hillf Danton <hdanton@sina.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Add support to dump resource tracker in RAW format

Add support to get resource dump in raw format. It enable drivers to
return the entire device specific QP/CQ/MR context without a need from the
driver to set each field separately.

The raw query returns only the device specific data, general data is still
returned by using the existing queries.

Example:

$ rdma res show mr dev mlx5_1 mrn 2 -r -j
[{"ifindex":7,"ifname":"mlx5_1",
"data":[0,4,255,254,0,0,0,0,0,0,0,0,16,28,0,216,...]}]

Link: https://lore.kernel.org/r/20200623113043.1228482-9-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Add dedicated CM_ID resource tracker function

In order to avoid double multiplexing of the resource when it is a cm id,
add a dedicated callback function. In addition remove fill_res_entry which
is not used anymore.

Link: https://lore.kernel.org/r/20200623113043.1228482-8-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Add dedicated QP resource tracker function

In order to avoid double multiplexing of the resource when it is a QP, add
a dedicated callback function.

Link: https://lore.kernel.org/r/20200623113043.1228482-7-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Add a dedicated CQ resource tracker function

In order to avoid double multiplexing of the resource when it is a CQ, add
a dedicated callback function.

Link: https://lore.kernel.org/r/20200623113043.1228482-6-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Add dedicated MR resource tracker function

In order to avoid double multiplexing of the resource when it is a MR, add
a dedicated callback function.

Link: https://lore.kernel.org/r/20200623113043.1228482-5-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/core: Remove FMR device ops

After removing FMR support from all the RDMA ULPs and providers, there
is no need to keep FMR operation for IB devices.

Link: https://lore.kernel.org/r/11-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Introduce shared CQ pool API

Allow a ULP to ask the core to provide a completion queue based on a
least-used search on a per-device CQ pools. The device CQ pools grow in a
lazy fashion when more CQs are requested.

This feature reduces the amount of interrupts when using many QPs. Using
shared CQs allows for more effcient completion handling. It also reduces
the amount of overhead needed for CQ contexts.

Test setup:
Intel(R) Xeon(R) Platinum 8176M CPU @ 2.10GHz servers.
Running NVMeoF 4KB read IOs over ConnectX-5EX across Spectrum switch.
TX-depth = 32. The patch was applied in the nvme driver on both the target
and initiator. Four controllers are accessed from each core. In the
current test case we have exposed sixteen NVMe namespaces using four
different subsystems (four namespaces per subsystem) from one NVM port.
Each controller allocated X queues (RDMA QPs) and attached to Y CQs.
Before this series we had X == Y, i.e for four controllers we've created
total of 4X QPs and 4X CQs. In the shared case, we've created 4X QPs and
only X CQs which means that we have four controllers that share a
completion queue per core. Until fourteen cores there is no significant
change in performance and the number of interrupts per second is less than
a million in the current case.
==================================================
|Cores|Current KIOPs |Shared KIOPs |improvement|
|-----|---------------|--------------|-----------|
|14 |2332 |2723 |16.7% |
|-----|---------------|--------------|-----------|
|20 |2086 |2712 |30% |
|-----|---------------|--------------|-----------|
|28 |1971 |2669 |35.4% |
|=================================================
|Cores|Current avg lat|Shared avg lat|improvement|
|-----|---------------|--------------|-----------|
|14 |767us |657us |14.3% |
|-----|---------------|--------------|-----------|
|20 |1225us |943us |23% |
|-----|---------------|--------------|-----------|
|28 |1816us |1341us |26.1% |
========================================================
|Cores|Current interrupts|Shared interrupts|improvement|
|-----|------------------|-----------------|-----------|
|14 |1.6M/sec |0.4M/sec |72% |
|-----|------------------|-----------------|-----------|
|20 |2.8M/sec |0.6M/sec |72.4% |
|-----|------------------|-----------------|-----------|
|28 |2.9M/sec |0.8M/sec |63.4% |
====================================================================
|Cores|Current 99.99th PCTL lat|Shared 99.99th PCTL lat|improvement|
|-----|------------------------|-----------------------|-----------|
|14 |67ms |6ms |90.9% |
|-----|------------------------|-----------------------|-----------|
|20 |5ms |6ms |-10% |
|-----|------------------------|-----------------------|-----------|
|28 |8.7ms |6ms |25.9% |
|===================================================================

Performance improvement with sixteen disks (sixteen CQs per core) is
comparable.

Link: https://lore.kernel.org/r/1590568495-101621-3-git-send-email-yaminf@mellanox.com
Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Allow ib_client's to fail when add() is called

When a client is added it isn't allowed to fail, but all the client's have
various failure paths within their add routines.

This creates the very fringe condition where the client was added, failed
during add and didn't set the client_data. The core code will then still
call other client_data centric ops like remove(), rename(), get_nl_info(),
and get_net_dev_by_params() with NULL client_data - which is confusing and
unexpected.

If the add() callback fails, then do not call any more client ops for the
device, even remove.

Remove all the now redundant checks for NULL client_data in ops callbacks.

Update all the add() callbacks to return error codes
appropriately. EOPNOTSUPP is used for cases where the ULP does not support
the ib_device - eg because it only works with IB.

Link: https://lore.kernel.org/r/20200421172440.387069-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Fix missing error check on dev_set_name()

If name memory allocation fails the name will be left empty and
device_add_one() will crash:

kobject: (0000000004952746): attempted to be registered with empty name!
WARNING: CPU: 0 PID: 329 at lib/kobject.c:234 kobject_add_internal+0x7ac/0x9a0 lib/kobject.c:234
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 329 Comm: syz-executor.5 Not tainted 5.6.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
panic+0x2e3/0x75c kernel/panic.c:221
__warn.cold+0x2f/0x3e kernel/panic.c:582
report_bug+0x289/0x300 lib/bug.c:195
fixup_bug arch/x86/kernel/traps.c:174 [inline]
fixup_bug arch/x86/kernel/traps.c:169 [inline]
do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267
do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286
invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027
RIP: 0010:kobject_add_internal+0x7ac/0x9a0 lib/kobject.c:234
Code: 1a 98 ca f9 e9 f0 f8 ff ff 4c 89 f7 e8 6d 98 ca f9 e9 95 f9 ff ff e8 c3 f0 8b f9 4c 89 e6 48 c7 c7 a0 0e 1a 89 e8 e3 41 5c f9 <0f> 0b 41 bd ea ff ff ff e9 52 ff ff ff e8 a2 f0 8b f9 0f 0b e8 9b
RSP: 0018:ffffc90005b27908 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff815eae46 RDI: fffff52000b64f13
RBP: ffffc90005b27960 R08: ffff88805aeba480 R09: ffffed1015d06659
R10: ffffed1015d06658 R11: ffff8880ae8332c7 R12: ffff8880a37fd000
R13: 0000000000000000 R14: ffff888096691780 R15: 0000000000000001
kobject_add_varg lib/kobject.c:390 [inline]
kobject_add+0x150/0x1c0 lib/kobject.c:442
device_add+0x3be/0x1d00 drivers/base/core.c:2412
add_one_compat_dev drivers/infiniband/core/device.c:901 [inline]
add_one_compat_dev+0x46a/0x7e0 drivers/infiniband/core/device.c:857
rdma_dev_init_net+0x2eb/0x490 drivers/infiniband/core/device.c:1120
ops_init+0xb3/0x420 net/core/net_namespace.c:137
setup_net+0x2d5/0x8b0 net/core/net_namespace.c:327
copy_net_ns+0x29e/0x5a0 net/core/net_namespace.c:468
create_new_namespaces+0x403/0xb50 kernel/nsproxy.c:108
unshare_nsproxy_namespaces+0xc2/0x200 kernel/nsproxy.c:229
ksys_unshare+0x444/0x980 kernel/fork.c:2955
__do_sys_unshare kernel/fork.c:3023 [inline]
__se_sys_unshare kernel/fork.c:3021 [inline]
__x64_sys_unshare+0x31/0x40 kernel/fork.c:3021
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Link: https://lore.kernel.org/r/20200309193200.GA10633@ziepe.ca
Cc: stable@kernel.org
Fixes: 4e0f7b907072 ("RDMA/core: Implement compat device/sysfs tree in net namespace")
Reported-by: syzbot+ab4dae63f7d310641ded@syzkaller.appspotmail.com
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Remove err in iw_query_port

Since we can return device->ops.query_port directly, so no need to keep
those lines.

Link: https://lore.kernel.org/r/20200109134043.15568-1-guoqing.jiang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Rename event_handler_lock to qp_open_list_lock

This lock is used to protect the qp->open_list linked list. As a side
effect it seems to also globally serialize the qp event_handler, but it
isn't clear if that is a deliberate design.

Link: https://lore.kernel.org/r/20191212113024.336702-5-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Let IB core distribute cache update events

Currently when the low level driver notifies Pkey, GID, and port change
events they are notified to the registered handlers in the order they are
registered.

IB core and other ULPs such as IPoIB are interested in GID, LID, Pkey
change events.

Since all GID queries done by ULPs are serviced by IB core, and the IB
core deferes cache updates to a work queue, it is possible for other
clients to see stale cache data when they handle their own events.

For example, the below call tree shows how ipoib will call
rdma_query_gid() concurrently with the update to the cache sitting in the
WQ.

mlx5_ib_handle_event()
ib_dispatch_event()
ib_cache_event()
queue_work() -> slow cache update

[..]
ipoib_event()
queue_work()
[..]
work handler
ipoib_ib_dev_flush_light()
__ipoib_ib_dev_flush()
ipoib_dev_addr_changed_valid()
rdma_query_gid() <- Returns old GID, cache not updated.

Move all the event dispatch to a work queue so that the cache update is
always done before any clients are notified.

Fixes: f35faa4ba956 ("IB/core: Simplify ib_query_gid to always refer to cache")
Link: https://lore.kernel.org/r/20191212113024.336702-3-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/odp: Use mmu_interval_notifier_insert()

Replace the internal interval tree based mmu notifier with the new common
mmu_interval_notifier_insert() API. This removes a lot of code and fixes a
deadlock that can be triggered in ODP:

zap_page_range()
mmu_notifier_invalidate_range_start()
[..]
ib_umem_notifier_invalidate_range_start()
down_read(&per_mm->umem_rwsem)
unmap_single_vma()
[..]
__split_huge_page_pmd()
mmu_notifier_invalidate_range_start()
[..]
ib_umem_notifier_invalidate_range_start()
down_read(&per_mm->umem_rwsem) // DEADLOCK

mmu_notifier_invalidate_range_end()
up_read(&per_mm->umem_rwsem)
mmu_notifier_invalidate_range_end()
up_read(&per_mm->umem_rwsem)

The umem_rwsem is held across the range_start/end as the ODP algorithm for
invalidate_range_end cannot tolerate changes to the interval
tree. However, due to the nested invalidation regions the second
down_read() can deadlock if there are competing writers. The new core code
provides an alternative scheme to solve this problem.

Fixes: ca748c39ea3f ("RDMA/umem: Get rid of per_mm->notifier_count")
Link: https://lore.kernel.org/r/20191112202231.3856-6-jgg@ziepe.ca
Tested-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Add interfaces to get VF node and port GUIDs

Provide ability to get node and port GUIDs of VFs to be symmetrical
to already existing set option.

Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

RDMA/core: Fix return code when modify_port isn't supported

Improve return code from ib_modify_port() by doing the following:
- Use "-EOPNOTSUPP" instead "-ENOSYS" which is the proper return code

- Allow only fake IB_PORT_CM_SUP manipulation for RoCE providers that
didn't implement the modify_port callback, otherwise return
"-EOPNOTSUPP"

Fixes: 61e0962d5221 ("IB: Avoid ib_modify_port() failure for RoCE devices")
Link: https://lore.kernel.org/r/20191028155931.1114-2-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Create mmap database and cookie helper functions

Create some common API's for adding entries to a xa_mmap. Searching for
an entry and freeing one.

The general approach is copied from the EFA driver and improved to be more
general and do more to help the drivers. Integration with the core allows
a reference counted scheme with a free function so that the driver can
know when its mmaps are all gone.

This significant new functionality will be helpful for drivers to have the
correct lifetime model for mmap objects.

Link: https://lore.kernel.org/r/20191030094417.16866-3-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Set DMA parameters correctly

The dma_set_max_seg_size() call in setup_dma_device() does not have any
effect since device->dev.dma_parms is NULL. Fix this by initializing
device->dev.dma_parms first.

Link: https://lore.kernel.org/r/20191025225830.257535-5-bvanassche@acm.org
Fixes: d10bcf947a3e ("RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Avoid deadlock during netlink message handling

When rdmacm module is not loaded, and when netlink message is received to
get char device info, it results into a deadlock due to recursive locking
of rdma_nl_mutex with the below call sequence.

[..]
rdma_nl_rcv()
mutex_lock()
[..]
rdma_nl_rcv_msg()
ib_get_client_nl_info()
request_module()
iw_cm_init()
rdma_nl_register()
mutex_lock(); <- Deadlock, acquiring mutex again

Due to above call sequence, following call trace and deadlock is observed.

kernel: __mutex_lock+0x35e/0x860
kernel: ? __mutex_lock+0x129/0x860
kernel: ? rdma_nl_register+0x1a/0x90 [ib_core]
kernel: rdma_nl_register+0x1a/0x90 [ib_core]
kernel: ? 0xffffffffc029b000
kernel: iw_cm_init+0x34/0x1000 [iw_cm]
kernel: do_one_initcall+0x67/0x2d4
kernel: ? kmem_cache_alloc_trace+0x1ec/0x2a0
kernel: do_init_module+0x5a/0x223
kernel: load_module+0x1998/0x1e10
kernel: ? __symbol_put+0x60/0x60
kernel: __do_sys_finit_module+0x94/0xe0
kernel: do_syscall_64+0x5a/0x270
kernel: entry_SYSCALL_64_after_hwframe+0x49/0xbe

process stack trace:
[<0>] __request_module+0x1c9/0x460
[<0>] ib_get_client_nl_info+0x5e/0xb0 [ib_core]
[<0>] nldev_get_chardev+0x1ac/0x320 [ib_core]
[<0>] rdma_nl_rcv_msg+0xeb/0x1d0 [ib_core]
[<0>] rdma_nl_rcv+0xcd/0x120 [ib_core]
[<0>] netlink_unicast+0x179/0x220
[<0>] netlink_sendmsg+0x2f6/0x3f0
[<0>] sock_sendmsg+0x30/0x40
[<0>] ___sys_sendmsg+0x27a/0x290
[<0>] __sys_sendmsg+0x58/0xa0
[<0>] do_syscall_64+0x5a/0x270
[<0>] entry_SYSCALL_64_after_hwframe+0x49/0xbe

To overcome this deadlock and to allow multiple netlink messages to
progress in parallel, following scheme is implemented.

1. Split the lock protecting the cb_table into a per-index lock, and make
it a rwlock. This lock is used to ensure no callbacks are running after
unregistration returns. Since a module will not be registered once it
is already running callbacks, this avoids the deadlock.

2. Use smp_store_release() to update the cb_table during registration so
that no lock is required. This avoids lockdep problems with thinking
all the rwsems are the same lock class.

Fixes: 0e2d00eb6fd45 ("RDMA: Add NLDEV_GET_CHARDEV to allow char dev discovery and autoload")
Link: https://lore.kernel.org/r/20191015080733.18625-1-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/nldev: Provide MR statistics

Add RDMA nldev netlink interface for dumping MR statistics information.

Output example:

$ ./ibv_rc_pingpong -o -P -s 500000000
local address: LID 0x0001, QPN 0x00008a, PSN 0xf81096, GID ::

$ rdma stat show mr
dev mlx5_0 mrn 2 page_faults 122071 page_invalidations 0

Link: https://lore.kernel.org/r/20191016062308.11886-5-leon@kernel.org
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

infiniband: fix core/ kernel-doc notation

Correct function parameter names (typos or renames).
Add kernel-doc notation for missing function parameters.

../drivers/infiniband/core/sa_query.c:1263: warning: Function parameter or member 'gid_attr' not described in 'ib_init_ah_attr_from_path'
../drivers/infiniband/core/sa_query.c:1263: warning: Excess function parameter 'sgid_attr' description in 'ib_init_ah_attr_from_path'

../drivers/infiniband/core/device.c:145: warning: Function parameter or member 'dev' not described in 'rdma_dev_access_netns'
../drivers/infiniband/core/device.c:145: warning: Excess function parameter 'device' description in 'rdma_dev_access_netns'
../drivers/infiniband/core/device.c:1333: warning: Function parameter or member 'name' not described in 'ib_register_device'
../drivers/infiniband/core/device.c:1461: warning: Function parameter or member 'ib_dev' not described in 'ib_unregister_device'
../drivers/infiniband/core/device.c:1461: warning: Excess function parameter 'device' description in 'ib_unregister_device'
../drivers/infiniband/core/device.c:1483: warning: Function parameter or member 'ib_dev' not described in 'ib_unregister_device_and_put'
../drivers/infiniband/core/device.c:1550: warning: Function parameter or member 'ib_dev' not described in 'ib_unregister_device_queued'

Link: https://lore.kernel.org/r/20191010035240.191542461@gmail.com
Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Fix return code when modify_device isn't supported

The proper return code is "-EOPNOTSUPP" when modify_device callback is not
supported.

Link: https://lore.kernel.org/r/20190923104158.5331-2-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Fix use after free and refcnt leak on ndev in_device in iwarp_query_port

If an iWARP driver is probed and removed while there are no ips set for
the device, it will lead to a reference count leak on the inet device of
the netdevice.

In addition, the netdevice was accessed after already calling netdev_put,
which could lead to using the netdev after already freed.

Fixes: 4929116bdf72 ("RDMA/core: Add common iWARP query port")
Link: https://lore.kernel.org/r/20190925123332.10746-1-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Make invalidate_range a device operation

The callback function 'invalidate_range' is implemented in a driver so the
place for it is in the ib_device_ops structure and not in ib_ucontext.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Link: https://lore.kernel.org/r/20190819111710.18440-11-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Add common iWARP query port

Add support for a common iWARP query port function, the new function
includes a common code that is used by the iWARP devices to update the
port attributes like max_mtu, active_mtu, state, and phys_state, the
function also includes a call for the driver-specific query_port callback
to query the device-specific port attributes.

Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Link: https://lore.kernel.org/r/20190807103138.17219-4-kamalheib1@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/devices: Remove the lock around remove_client_context

Due to the complexity of client->remove() callbacks it is desirable to not
hold any locks while calling them. Remove the last one by tracking only
the highest client ID and running backwards from there over the xarray.

Since the only purpose of that lock was to protect the linked list, we can
drop the lock.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731081841.32345-3-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/devices: Do not deadlock during client removal

lockdep reports:

WARNING: possible circular locking dependency detected

modprobe/302 is trying to acquire lock:
0000000007c8919c ((wq_completion)ib_cm){+.+.}, at: flush_workqueue+0xdf/0x990

but task is already holding lock:
000000002d3d2ca9 (&device->client_data_rwsem){++++}, at: remove_client_context+0x79/0xd0 [ib_core]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (&device->client_data_rwsem){++++}:
down_read+0x3f/0x160
ib_get_net_dev_by_params+0xd5/0x200 [ib_core]
cma_ib_req_handler+0x5f6/0x2090 [rdma_cm]
cm_process_work+0x29/0x110 [ib_cm]
cm_req_handler+0x10f5/0x1c00 [ib_cm]
cm_work_handler+0x54c/0x311d [ib_cm]
process_one_work+0x4aa/0xa30
worker_thread+0x62/0x5b0
kthread+0x1ca/0x1f0
ret_from_fork+0x24/0x30

-> #1 ((work_completion)(&(&work->work)->work)){+.+.}:
process_one_work+0x45f/0xa30
worker_thread+0x62/0x5b0
kthread+0x1ca/0x1f0
ret_from_fork+0x24/0x30

-> #0 ((wq_completion)ib_cm){+.+.}:
lock_acquire+0xc8/0x1d0
flush_workqueue+0x102/0x990
cm_remove_one+0x30e/0x3c0 [ib_cm]
remove_client_context+0x94/0xd0 [ib_core]
disable_device+0x10a/0x1f0 [ib_core]
__ib_unregister_device+0x5a/0xe0 [ib_core]
ib_unregister_device+0x21/0x30 [ib_core]
mlx5_ib_stage_ib_reg_cleanup+0x9/0x10 [mlx5_ib]
__mlx5_ib_remove+0x3d/0x70 [mlx5_ib]
mlx5_ib_remove+0x12e/0x140 [mlx5_ib]
mlx5_remove_device+0x144/0x150 [mlx5_core]
mlx5_unregister_interface+0x3f/0xf0 [mlx5_core]
mlx5_ib_cleanup+0x10/0x3a [mlx5_ib]
__x64_sys_delete_module+0x227/0x350
do_syscall_64+0xc3/0x6a4
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Which is due to the read side of the client_data_rwsem being obtained
recursively through a work queue flush during cm client removal.

The lock is being held across the remove in remove_client_context() so
that the function is a fence, once it returns the client is removed. This
is required so that the two callers do not proceed with destruction until
the client completes removal.

Instead of using client_data_rwsem use the existing device unregistration
refcount and add a similar client unregistration (client->uses) refcount.

This will fence the two unregistration paths without holding any locks.

Cc: <stable@vger.kernel.org>
Fixes: 921eab1143aa ("RDMA/devices: Re-organize device.c locking")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731081841.32345-2-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/core: Support netlink commands in non init_net net namespaces

Now that IB core supports RDMA device binding with specific net namespace,
enable IB core to accept netlink commands in non init_net namespaces.

This is done by having per net namespace netlink socket.

At present only netlink device handling client RDMA_NL_NLDEV supports
device handling in multiple net namespaces. Hence do not accept netlink
messages for other clients in non init_net net namespaces.

Link: https://lore.kernel.org/r/20190723070205.6247-1-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Annotate destroy of mutex to ensure that it is released as unlocked

While compiled with CONFIG_DEBUG_MUTEXES, the kernel ensures that mutex is
not held during destroy. Hence add mutex_destroy() for mutexes used in
RDMA modules.

Link: https://lore.kernel.org/r/20190723065733.4899-2-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink

Added parameter in ib_device for enabling dynamic interrupt moderation so
that it can be configured in userspace using rdma tool.

In order to set adaptive-moderation for an ib device the command is:
rdma dev set [DEV] adaptive-moderation [on|off]
Please set on/off.

rdma dev show
0: mlx5_0: node_type ca fw 16.26.0055 node_guid 248a:0703:00a5:29d0
sys_image_guid 248a:0703:00a5:29d0 adaptive-moderation on

rdma resource show cq
dev mlx5_0 cqn 0 cqe 1023 users 4 poll-ctx UNBOUND_WORKQUEUE
adaptive-moderation off comm [ib_core]

Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/netlink: Implement counter dumpit calback

This patch adds the ability to return all available counters together with
their properties and hwstats.

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/counter: Add "auto" configuration mode support

In auto mode all QPs belong to one category are bind automatically to a
single counter set. Currently only "qp type" is supported.

In this mode the qp counter is set in RST2INIT modification, and when a qp
is destroyed the counter is unbound.

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/counter: Add set/clear per-port auto mode support

Add an API to support set/clear per-port auto mode.

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Introduce ib_map_mr_sg_pi to map data/protection sgl's

This function will map the previously dma mapped SG lists for PI
(protection information) and data to an appropriate memory region for
future registration.
The given MR must be allocated as IB_MR_TYPE_INTEGRITY.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Introduce IB_MR_TYPE_INTEGRITY and ib_alloc_mr_integrity API

This is a preparation for signature verbs API re-design. In the new
design a single MR with IB_MR_TYPE_INTEGRITY type will be used to perform
the needed mapping for data integrity operations.

Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Report available cdevs through RDMA_NLDEV_CMD_GET_CHARDEV

Update the struct ib_client for all modules exporting cdevs related to the
ibdevice to also implement RDMA_NLDEV_CMD_GET_CHARDEV. All cdevs are now
autoloadable and discoverable by userspace over netlink instead of relying
on sysfs.

uverbs also exposes the DRIVER_ID for drivers that are able to support
driver id binding in rdma-core.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA: Add NLDEV_GET_CHARDEV to allow char dev discovery and autoload

Allow userspace to issue a netlink query against the ib_device for
something like "uverbs" and get back the char dev name, inode major/minor,
and interface ABI information for "uverbs0".

Since we are now in netlink this can also trigger a module autoload to
make the uverbs device come into existence.

Largely this will let us replace searching and reading inside sysfs to
setup devices, and provides an alternative (using driver_id) to device
name based provider binding for things like rxe.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

locking/lockdep: Rename lockdep_assert_held_exclusive() -> lockdep_assert_held_write()

All callers of lockdep_assert_held_exclusive() use it to verify the
correct locking state of either a semaphore (ldisc_sem in tty,
mmap_sem for perf events, i_rwsem of inode for dax) or rwlock by
apparmor. Thus it makes sense to rename _exclusive to _write since
that's the semantics callers care. Additionally there is already
lockdep_assert_held_read(), which this new naming is more consistent with.

No functional changes.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190531100651.3969-1-nborisov@suse.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

LSM: switch to blocking policy update notifiers

Atomic policy updaters are not very useful as they cannot
usually perform the policy updates on their own. Since it
seems that there is no strict need for the atomicity,
switch to the blocking variant. While doing so, rename
the functions accordingly.

Signed-off-by: Janne Karhunen <janne.karhunen@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>

RDMA: Convert CQ allocations to be under core responsibility

Ensure that CQ is allocated and freed by IB/core and not by drivers.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Tested-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA: Move owner into struct ib_device_ops

This more closely follows how other subsytems work, with owner being a
member of the structure containing the function pointers.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Move uverbs_abi_ver into struct ib_device_ops

No reason for every driver to emit code to set this, just make it part of
the driver's existing static const ops structure.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Move driver_id into struct ib_device_ops

No reason for every driver to emit code to set this, just make it part of
the driver's existing static const ops structure.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Fix panic when port_data isn't initialized

This happens if assign_name() returns failure when called from
ib_register_device(), that will lead to the following panic in every time
that someone touches the port_data's data members.

BUG: unable to handle kernel NULL pointer dereference at 00000000000000c0
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 19 PID: 1994 Comm: systemd-udevd Not tainted 5.1.0-rc5+ #1
Hardware name: HP ProLiant DL360p Gen8, BIOS P71 12/20/2013
RIP: 0010:_raw_spin_lock_irqsave+0x1e/0x40
Code: 85 ff 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 9c 58 66 66 90
66 90 48 89 c3 fa 66 66 90 66 66 90 31 c0 ba 01 00 00 00 <f0> 0f b1 17 0f
94 c2 84 d2 74 05 48 89 d8 5b c3 89 c6 e8 b4 85 8a
RSP: 0018:ffffa8d7079a7c08 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000202 RCX: ffffa8d7079a7bf8
RDX: 0000000000000001 RSI: ffff93607c990000 RDI: 00000000000000c0
RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffc08c4dd8
R10: 0000000000000000 R11: 0000000000000001 R12: 00000000000000c0
R13: ffff93607c990000 R14: ffffffffc05a9740 R15: ffffa8d7079a7e98
FS: 00007f1c6ee438c0(0000) GS:ffff93609f6c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c0 CR3: 0000000819fca002 CR4: 00000000000606e0
Call Trace:
free_netdevs+0x4d/0xe0 [ib_core]
ib_dealloc_device+0x51/0xb0 [ib_core]
__mlx5_ib_add+0x5e/0x70 [mlx5_ib]
mlx5_add_device+0x57/0xe0 [mlx5_core]
mlx5_register_interface+0x85/0xc0 [mlx5_core]
? 0xffffffffc0474000
do_one_initcall+0x4e/0x1d4
? _cond_resched+0x15/0x30
? kmem_cache_alloc_trace+0x15f/0x1c0
do_init_module+0x5a/0x218
load_module+0x186b/0x1e40
? m_show+0x1c0/0x1c0
__do_sys_finit_module+0x94/0xe0
do_syscall_64+0x5b/0x180
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 8ceb1357b337 ("RDMA/device: Consolidate ib_device per_port data into one place")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Return void from ib_device_check_mandatory()

The return value from ib_device_check_mandatory() is always 0 - change it
to be void.

Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/srp: Rename SRP sysfs name after IB device rename trigger

SRP logic used device name and port index as symlink to relevant
kobject. If the IB device is renamed then the prior name will be re-used
by the next device plugged in and sysfs will panic as SRP will try to
re-use the same name.

mlx5_ib: Mellanox Connect-IB Infiniband driver v5.0-0
sysfs: cannot create duplicate filename '/class/infiniband_srp/srp-mlx5_0-1'
CPU: 3 PID: 1107 Comm: modprobe Not tainted 5.1.0-for-upstream-perf-2019-05-12_15-09-52-87 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
dump_stack+0x5a/0x73
sysfs_warn_dup+0x58/0x70
sysfs_do_create_link_sd.isra.2+0xa3/0xb0
device_add+0x33f/0x660
srp_add_one+0x301/0x4f0 [ib_srp]
add_client_context+0x99/0xe0 [ib_core]
enable_device_and_get+0xd1/0x1b0 [ib_core]
ib_register_device+0x533/0x710 [ib_core]
? mutex_lock+0xe/0x30
__mlx5_ib_add+0x23/0x70 [mlx5_ib]
mlx5_add_device+0x4e/0xd0 [mlx5_core]
mlx5_register_interface+0x85/0xc0 [mlx5_core]
? 0xffffffffa0791000
do_one_initcall+0x4b/0x1cb
? kmem_cache_alloc_trace+0xc6/0x1d0
? do_init_module+0x22/0x21f
do_init_module+0x5a/0x21f
load_module+0x17f2/0x1ca0
? m_show+0x1c0/0x1c0
__do_sys_finit_module+0x94/0xe0
do_syscall_64+0x48/0x120
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f157cce10d9

The module load/unload sequence was used to trigger such kernel panic:
sudo modprobe ib_srp
sudo modprobe -r mlx5_ib
sudo modprobe -r mlx5_core
sudo modprobe mlx5_core

Have SRP track the name of the core device so that it can't have a name
collision.

Fixes: d21943dd19b5 ("RDMA/core: Implement IB device rename function")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/device: Don't fire uevent before device is fully initialized

When the refcount is 0 the device is invisible to netlink. However in the
patch below the refcount = 1 was moved to after the device_add(). This
creates a race where userspace can issue a netlink query after the
device_add() event and not see the device as visible.

Ensure that no uevent is fired before device is fully registered.

Fixes: d79af7242bb2 ("RDMA/device: Expose ib_device_try_get(()")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Get rid of iw_cm_verbs

Integrate iw_cm_verbs data members into ib_device_ops and ib_device
structs, this is done to achieve the following:

1) Avoid memory related bugs durring error unwind
2) Make the code more cleaner
3) Reduce code duplication

Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Do not invoke init_port on compat devices

The driver interface cannot manipulate the sysfs of the compat device,
only of the full device so we must avoid calling the driver sysfs APIs on
compat devices.

This prevents an oops:

Call Trace:
dump_stack+0x5a/0x73
kobject_init+0x74/0x80
kobject_init_and_add+0x35/0xb0
hfi1_create_port_files+0x6e/0x3c0 [hfi1]
ib_setup_port_attrs+0x43b/0x560 [ib_core]
add_one_compat_dev+0x16a/0x230 [ib_core]
rdma_dev_init_net+0x110/0x160 [ib_core]
ops_init+0x38/0xf0
setup_net+0xcf/0x1e0
copy_net_ns+0xb7/0x130
create_new_namespaces+0x11a/0x1b0
unshare_nsproxy_namespaces+0x55/0xa0
ksys_unshare+0x1a7/0x340
__x64_sys_unshare+0xe/0x20
do_syscall_64+0x5b/0x180
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 5417783eabb2 ("RDMA/core: Support core port attributes in non init_net")
Reported-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Introduce RDMA subsystem ibdev_* print functions

Similarly to dev/netdev/etc printk helpers, add standard printk helpers
for the RDMA subsystem.

Example output:
efa 0000:00:06.0 efa_0: Hello World!
efa_0: Hello World! (no parent device set)
(NULL ib_device): Hello World! (ibdev is NULL)

Cc: Jason Baron <jbaron@akamai.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/core: Add a netlink command to change net namespace of rdma device

Provide an option to change the net namespace of a rdma device through a
netlink command. When multiple rdma devices exists in a system, and when
containers are used, this will limit rdma device visibility to a specified
net namespace.

An example command to change net namespace of mlx5_1 device to the
previously created net namespace 'foo' is:

$ ip netns add foo
$ rdma dev set mlx5_1 netns foo

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Introduce a helper function to change net namespace of rdma device

Introduce a helper function that changes rdma device's net namespace which
performs mini disable/enable sequence to have device visible only in
assigned net namespace.

Device unregistration, device rename and device change net namespace
may be invoked concurrently.

(a) device unregistration needs to wait if a device change (rename or net
namespace change) operation is in progress.
(b) device net namespace change should not proceed if the unregistration
has started.
(c) while one cpu is changing device net namespace, other cpu should not
be able to rename or change net namespace.

To address above concurrency,
(a) Use unreg_mutex to synchronize between ib_unregister_device() and net
namespace change operation
(b) In cases where unregister_device() has started unregistration before
change_netns got chance to acquire unreg_mutex, validate the refcount
- if it dropped to zero, abort the net namespace change operation.

Finally use the helper function to change net namespace of ib device to
move the device back to init_net when such net is deleted.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Avoid freeing netdevs in disable_device()

So we can use the disable_device() helper while changing the net namespace
of the rdma device in a subsequent patch, move free_netdevs() out of it.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Handle SRQ allocations by IB/core

Convert SRQ allocation from drivers to be in the IB/core

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Handle AH allocations by IB/core

Simplify drivers by ensuring lifetime of ib_ah object. The changes
in .create_ah() go hand in hand with relevant update in .destroy_ah().

We will use this opportunity and convert .destroy_ah() to don't fail, as
it was suggested a long time ago, because there is nothing to do in case
of failure during destroy.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs

Combine contiguous regions of PAGE_SIZE pages into single scatter list
entry while building the scatter table for a umem. This minimizes the
number of the entries in the scatter list and reduces the DMA mapping
overhead, particularly with the IOMMU.

Set default max_seg_size in core for IB devices to 2G and do not combine
if we exceed this limit.

Also, purge npages in struct ib_umem as we now DMA map the umem SGL with
sg_nents and npage computation is not needed. Drivers should now be using
ib_umem_num_pages(), so fix the last stragglers.

Move npages tracking to ib_umem_odp as ODP drivers still need it.

Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Tested-by: Gal Pressman <galpress@amazon.com>
Tested-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Add command to set ib_core device net namspace sharing mode

Add netlink command that enables/disables sharing rdma device among
multiple net namespaces.

Using rdma tool,
$rdma sys set netns shared (default mode)

When rdma subsystem netns mode is set to shared mode, rdma devices
will be accessible in all net namespaces.

Using rdma tool,
$rdma sys set netns exclusive

When rdma subsystem netns mode is set to exclusive mode, devices
will be accessible in only one net namespace at any given
point of time.

If there are any net namespaces other than default init_net exists,
while executing this command, it will fail and mode cannot be changed.

To change this mode, netlink command is used instead of sysctl, because
netlink command allows to auto load a module.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Add interface to read device namespace sharing mode

Add an interface via netlink command to query whether rdma devices are
shared among multiple net namespaces or not. When using RDMAtool, it can
be queried as,

$rdma system show netns
netns shared

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Extend ib_device_get_by_index for net namespace

Extend ib_device_get_by_index() API to check device access for
net namespace for serving netlink commands.

Also enforce net ns check on dumpit commands which iterate over all
registered rdma devices and which don't call ib_device_get_by_index().

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Check net namespace access for uverbs, umad, cma and nldev

Introduce an API rdma_dev_access_netns() to check whether a rdma device
can be accessed from the specified net namespace or not.
Use rdma_dev_access_netns() while opening character uverbs, umad network
device and also check while rdma cm_id binds to rdma device.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Add module param to disable device sharing among net ns

Add module parameter to change a sharing mode of ib_core early in the
boot process. This parameter helps to those systems where modern up
to date rdma tool (iproute2) package may not be available during
kernel upgrade cycle.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Support core port attributes in non init_net

Now that sysfs compatibility layer for non init_net exists, add core port
attributes such as pkey and gid table to non init_net ns.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Implement compat device/sysfs tree in net namespace

Implement compatibility layer sysfs entries of ib_core so that non
init_net net namespaces can also discover rdma devices.

Each non init_net net namespace has ib_core_device created in it.
Such ib_core_device sysfs tree resembles rdma devices found in
init_net namespace.

This allows discovering rdma devices in multiple non init_net net
namespaces via sysfs entries and helpful to rdma-core userspace.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Restrict sysfs entries view to init_net

This is a preparation patch to provide isolation of rdma device in a
network namespace.

As first step, make rdma device visible only in init net namespace.
Subsequent patch will enable rdma device visibility back in multiple net
namespaces using compat ib_core_device device/sysfs tree.

Given that the IB subsystem depends on net stack, it needs to be
initialized after netdev and since it support devices, it needs to be
initialized before the device subsystem; therefore, change initcall
sequence to fs_initcall, so that when ib_core is compiled in the kernel
image, the right init sequence is followed.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Introduce ib_core_device to hold device

In order to support sysfs entries in multiple net namespaces for a rdma
device, introduce a ib_core_device whose scope is limited to hold core
device and per port sysfs related entries.

This is preparation patch so that multiple ib_core_devices in each net
namespace can be created in subsequent patch who all can share ib_device.

(a) Move sysfs specific fields to ib_core_device.
(b) Make sysfs and device life cycle related routines to work on
ib_core_device.
(c) Introduce and use rdma_init_coredev() helper to initialize
coredev fields.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Handle ucontext allocations by IB/core

Following the PD conversion patch, do the same for ucontext allocations.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rxe: Close a race after ib_register_device

Since rxe allows unregistration from other threads the rxe pointer can
become invalid any moment after ib_register_driver returns. This could
cause a user triggered use after free.

Add another driver callback to be called right after the device becomes
registered to complete any device setup required post-registration. This
callback has enough core locking to prevent the device from becoming
unregistered.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rxe: Add ib_device_get_by_name() and use it in rxe

rxe has an open coded version of this that is not as safe as the core
version. This lets us eliminate the internal device list entirely from
rxe.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/device: Provide APIs from the core code to help unregistration

These APIs are intended to support drivers that exist outside the usual
driver core probe()/remove() callbacks. Normally the driver core will
prevent remove() from running concurrently with probe(), once this safety
is lost drivers need more support to get the locking and lifetimes right.

ib_unregister_driver() is intended to be used during module_exit of a
driver using these APIs. It unregisters all the associated ib_devices.

ib_unregister_device_and_put() is to be used by a driver-specific removal
function (ie removal by name, removal from a netdev notifier, removal from
netlink)

ib_unregister_queued() is to be used from netdev notifier chains where
RTNL is held.

The locking is tricky here since once things become async it is possible
to race unregister with registration. This is largely solved by relying on
the registration refcount, unregistration will only ever work on something
that has a positive registration refcount - and then an unregistration
mutex serializes all competing unregistrations of the same device.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/device: Add ib_device_get_by_netdev()

Several drivers need to find the ib_device from a given netdev. rxe needs
this at speed in an unsleepable context, so choose to implement the
translation using a RCU safe hash table.

The hash table can have a many to one mapping. This is intended to support
some future case where multiple IB drivers (ie iWarp and RoCE) connect to
the same netdevs. driver_ids will need to be different to support this.

In the process this makes the struct ib_device and ib_port_data RCU safe
by deferring their kfrees.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/device: Add ib_device_set_netdev() as an alternative to get_netdev

The associated netdev should not actually be very dynamic, so for most
drivers there is no reason for a callback like this. Provide an API to
inform the core code about the net dev affiliation and use a core
maintained data structure instead.

This allows the core code to be more aware of the ndev relationship which
will allow some new APIs based around this.

This also uses locking that makes some kind of sense, many drivers had a
confusing RCU lock, or missing locking which isn't right.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/device: Consolidate ib_device per_port data into one place

There is no reason to have three allocations of per-port data. Combine
them together and make the lifetime for all the per-port data match the
struct ib_device.

Following patches will require more port-specific data, now there is a
good place to put it.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Add and use rdma_for_each_port

We have many loops iterating over all of the end port numbers on a struct
ib_device, simplify them with a for_each helper.

Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/restrack: Hide restrack DB from IB/core

There is no need to expose internals of restrack DB to IB/core.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Move device addition deletion to device.c

Move core device addition and removal from sysfs.c to device.c as device.c
is more appropriate place for device management.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Use simpler device_del() instead of device_unregister()

Instead of holding extra reference using get_device() that
device_unregister() releases, simplify it as below.

device_add() balances with device_del(). device_initialize() balances
with put_device(), always via ib_dealloc_device().

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/devices: Re-organize device.c locking

The locking here started out with a single lock that covered everything
and then has lately veered into crazy town.

The fundamental problem is that several places need to iterate over a
linked list, but also need to drop their locks to avoid deadlock during
client callbacks.

xarray's restartable iteration offers a simple solution to the
problem. Once all the lists are xarrays we can drop locks in the places
that need that and rely on xarray to provide consistency and locking for
the data structure.

The resulting simplification is that each of the three lists has a
dedicated rwsem that must be held when working with the list it
covers. One data structure is no longer covered by multiple locks.

The sleeping semaphore is selected because the read side generally needs
to be held over something sleeping, and using RCU reader locking in those
cases is overkill.

In the process this simplifies the entire registration/unregistration flow
to be the expected list of setups and the reversed list of matching
teardowns, and the registration lock 'refcount' can now be revised to be
released after the ULPs are removed, providing a very sane semantic for
this feature.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/devices: Use xarray to store the client_data

Now that we have a small ID for each client we can use xarray instead of
linearly searching linked lists for client data. This will give much
faster and scalable client data lookup, and will lets us revise the
locking scheme.

Since xarray can store 'going_down' using a mark just entirely eliminate
the struct ib_client_data and directly store the client_data value in the
xarray. However this does require a special iterator as we must still
iterate over any NULL client_data values.

Also eliminate the client_data_lock in favour of internal xarray locking.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/devices: Use xarray to store the clients

This gives each client a unique ID and will let us move client_data to use
xarray, and revise the locking scheme.

clients have to be add/removed in strict FIFO/LIFO order as they
interdepend. To support this the client_ids are assigned to increase in
FIFO order. The existing linked list is kept to support reverse iteration
until xarray can get a reverse iteration API.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>

RDMA/device: Use an ida instead of a free page in alloc_name

ida is the proper data structure to hold list of clustered small integers
and then allocate an unused integer. Get rid of the convoluted and limited
open-coded bitmap.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/device: Get rid of reg_state

This really has no purpose anymore, refcount can be used to tell if the
device is still registered. Keeping it around just invites mis-use.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>

RDMA/device: Call ib_cache_release_one() only from ib_device_release()

Instead of complicated logic about when this memory is freed, always free
it during device release(). All the cache pointers start out as NULL, so
it is safe to call this before the cache is initialized.

This makes for a simpler error unwind flow, and a simpler understanding of
the lifetime of the memory allocations inside the struct ib_device.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/device: Ensure that security memory is always freed

Since this only frees memory it should be done during the release
callback. Otherwise there are possible error flows where it might not get
called if registration aborts.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/device: Check that the rename is nop under the lock

Since another rename could be running in parallel it is safer to check
that the name is not changing inside the lock, where we already know the
device name will not change.

Fixes: d21943dd19b5 ("RDMA/core: Implement IB device rename function")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>

RDMA: Handle PD allocations by IB/core

The PD allocations in IB/core allows us to simplify drivers and their
error flows in their .alloc_pd() paths. The changes in .alloc_pd() go hand
in had with relevant update in .dealloc_pd().

We will use this opportunity and convert .dealloc_pd() to don't fail, as
it was suggested a long time ago, failures are not happening as we have
never seen a WARN_ON print.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Share driver structure size with core

Add new macros to be used in drivers while registering ops structure and
IB/core while calling allocation routines, so drivers won't need to
perform kzalloc/kfree in their paths.

The change in allocation stage allows us to initialize common fields prior
to calling to drivers (e.g. restrack).

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Don't register each MAD agent for LSM notifier

When creating many MAD agents in a short period of time, receive packet
processing can be delayed long enough to cause timeouts while new agents
are being added to the atomic notifier chain with IRQs disabled. Notifier
chain registration and unregstration is an O(n) operation. With large
numbers of MAD agents being created and destroyed simultaneously the CPUs
spend too much time with interrupts disabled.

Instead of each MAD agent registering for it's own LSM notification,
maintain a list of agents internally and register once, this registration
already existed for handling the PKeys. This list is write mostly, so a
normal spin lock is used vs a read/write lock. All MAD agents must be
checked, so a single list is used instead of breaking them down per
device.

Notifier calls are done under rcu_read_lock, so there isn't a risk of
similar packet timeouts while checking the MAD agents security settings
when notified.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Use the ops infrastructure to keep all callbacks in one place

As preparation to hide rdma_restrack_root, refactor the code to use the
ops structure instead of a special callback which is hidden in
rdma_restrack_root.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Simplify restrack interface

In the current implementation, we have one restrack root per-device and
all users are simply providing it directly. Let's simplify the interface
and have callers provide the ib_device and internally access the
restrack_root.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Add indication for in kernel API support to IB device

Drivers that do not provide kernel verbs support should not be used by ib
kernel clients at all.

In case a device does not implement all mandatory verbs for kverbs usage
mark it as a non kverbs provider and prevent its usage for all clients
except for uverbs.

The device is marked as a non kverbs provider using the 'kverbs_provider'
flag which should only be set by the core code. The clients can choose
whether kverbs are requested for its usage using the 'no_kverbs_req' flag
which is currently set for uverbs only.

This patch allows drivers to remove mandatory verbs stubs and simply set
the callbacks to NULL. The IB device will be registered as a non-kverbs
provider. Note that verbs that are required for the device registration
process must be implemented.

Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Provide safe ib_alloc_device() function

All callers to ib_alloc_device() provide a larger size than struct
ib_device and rely on the fact that struct ib_device is embedded in their
driver specific structure as the first member.

Provide a safer variant of ib_alloc_device() that checks and enforces this
approach to make sure the drivers are using it right.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/device: Expose ib_device_try_get(()

It turns out future patches need this capability quite widely now, not
just for netlink, so provide two global functions to manage the
registration lock refcount.

This also moves the point the lock becomes 1 to within
ib_register_device() so that the semantics of the public API are very sane
and clear. Calling ib_device_try_get() will fail on devices that are only
allocated but not yet registered.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>

IB/core: Simplify rdma cgroup registration

RDMA cgroup registration routine always returns success, so simplify
function to be void and run clang formatter over whole CONFIG_CGROUP_RDMA
art of core_priv.h.

This reduces unwinding error path for regular registration and future net
namespace change functionality for rdma device.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/device: Use __ib_device_get_by_name() in ib_device_rename()

No reason to open code this loop.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>

RDMA: Introduce and use rdma_device_to_ibdev()

Introduce and use rdma_device_to_ibdev() API for those drivers which are
registering one sysfs group and also use in ib_core.

In subsequent patch, device->provider_ibdev one-to-one mapping is no
longer holds true during accessing sysfs entries.
Therefore, introduce an API rdma_device_to_ibdev() that provides such
information.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Rename port_callback to init_port

Most provider routines are callback routines which ib core invokes.
_callback suffix doesn't convey information about when such callback is
invoked. Therefore, rename port_callback to init_port.

Additionally, store the init_port function pointer in ib_device_ops, so
that it can be accessed in subsequent patches when binding rdma device to
net namespace.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Add advise_mr to the list of known ops

We need to add advise_mr to the list of operation setters on the ib_device
or otherwise callers to ib_set_device_ops() for advise_mr operation will
not have their callback registered.

When the advise_mr series was merged with the device ops series the
SET_DEVICE_OPS() was missed.

Fixes: 813e90b1aeaa ("IB/mlx5: Add advise_mr() support")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Start use ib_device_ops

Make all the required change to start use the ib_device_ops structure.

Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Introduce ib_device_ops

This change introduces the ib_device_ops structure that defines all the
InfiniBand device operations in one place, so the code will be more
readable and clean, unlike today when the ops are mixed with ib_device
data members.

The providers will need to define the supported operations and assign them
using ib_set_device_ops(), that will also make the providers code more
readable and clean.

Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Validate port number in query_pkey verb

Before calling the driver's function let's make sure port is valid.

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Sync unregistration with netlink commands

When the rdma device is getting removed, get resource info can race with
device removal, as below:

CPU-0 CPU-1
-------- --------
rdma_nl_rcv_msg()
nldev_res_get_cq_dumpit()
mutex_lock(device_lock);
get device reference
mutex_unlock(device_lock); [..]
ib_unregister_device()
/* Valid reference to
* device->dev exists.
*/
ib_dealloc_device()

[..]
provider->fill_res_entry();

Even though device object is not freed, fill_res_entry() can get called on
device which doesn't have a driver anymore. Kernel core device reference
count is not sufficient, as this only keeps the structure valid, and
doesn't guarantee the driver is still loaded.

Similar race can occur with device renaming and device removal, where
device_rename() tries to rename a unregistered device. While this is fine
for devices of a class which are not net namespace aware, but it is
incorrect for net namespace aware class coming in subsequent series. If a
class is net namespace aware, then the below [1] call trace is observed in
above situation.

Therefore, to avoid the race, keep a reference count and let device
unregistration wait until all netlink users drop the reference.

[1] Call trace:
kernfs: ns required in 'infiniband' for 'mlx5_0'
WARNING: CPU: 18 PID: 44270 at fs/kernfs/dir.c:842 kernfs_find_ns+0x104/0x120
libahci i2c_core mlxfw libata dca [last unloaded: devlink]
RIP: 0010:kernfs_find_ns+0x104/0x120
Call Trace:
kernfs_find_and_get_ns+0x2e/0x50
sysfs_rename_link_ns+0x40/0xb0
device_rename+0xb2/0xf0
ib_device_rename+0xb3/0x100 [ib_core]
nldev_set_doit+0x165/0x190 [ib_core]
rdma_nl_rcv_msg+0x249/0x250 [ib_core]
? netlink_deliver_tap+0x8f/0x3e0
rdma_nl_rcv+0xd6/0x120 [ib_core]
netlink_unicast+0x17c/0x230
netlink_sendmsg+0x2f0/0x3e0
sock_sendmsg+0x30/0x40
__sys_sendto+0xdc/0x160

Fixes: da5c85078215 ("RDMA/nldev: add driver-specific resource tracking")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Refactor ib_register_device() function

ib_register_device() does several allocation and initialization
steps. Split it into smaller more readable functions for easy
review and maintenance.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/core: Fix unwinding flow in case of error to register device

If port pkey list initialization fails, free the port_immutable memory
during cleanup path. Currently it is missed out.

If cache setup fails, free the pkey list during cleanup path.

Fixes: d291f1a65 ("IB/core: Enforce PKey security on QPs")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/core: Implement IB device rename function

Generic implementation of IB device rename function.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/core: Use dev_name instead of ibdev->name

These return the same thing but dev_name is a more conventional use of the
kernel API.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>

RDMA/core: Use dev_err/dbg/etc instead of pr_* + ibdev->name

Any messages related to a device should be printed with the dev_*
formatters. This provides greater consistency for the user.

The core does not set pr_fmt so this has no significant change.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>

RDMA: Fully setup the device name in ib_register_device

The current code has two copies of the device name, ibdev->dev and
dev_name(&ibdev->dev), and they are setup at different times, which is
very confusing.

Set them both up at the same time and make dev_name() the lead name, which
is the proper use of the driver core APIs. To make it very clear that the
name is not valid until registration pass it in to the
ib_register_device() call rather than messing with ibdev->name directly.

Also the reorganization now checks that dev_name is unique even if it does
not contain a %.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>

RDMA/core: Assign device ifindex before publishing the device

Even though device->ifindex is assigned before adding the device in the
list which is read by netlink flow, it is better to assign rdma device
index before publishing the device in the system to users and clients.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Follow correct unregister order between sysfs and cgroup

During register_device() init sequence is,
(a) register with rdma cgroup followed by
(b) register with sysfs

Therefore, unregister_device() sequence should follow the reverse order.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Define client_data_lock as rwlock instead of spinlock

Even though device registration/unregistration and client
registration/unregistration is not a performance path, define the
client_data_lock as rwlock for code clarity.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Use simpler spin lock irq API from blocking context

add_client_context(), ib_unregister_device() and ib_unregister_client()
are designed to call from blocking context. There is no need to save and
restore last interrupt state when called from such blocking context. Even
though this is not a performance path, using the right spin lock API is
desired for code clarity.

To avoid checkpatch warning while removing flags, sizeof() is used.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Remove context entries from list while unregistering device

While unregistering a device, remove the context elements from the list to
not have any stale entries. With that any errors/bugs can be checked when
device is freed.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Use simplified list_for_each

While traversing client_data_list in following conditions, linked list is
only read, no elements of the list are removed. Therefore, use
list_for_each_entry(), instead of list_for_each_safe().

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: No need to protect kfree with spin lock and semaphore

While unregistering a client, only context removal should be protected
with lock. There is no need to protect a freeing of such context which is
already removed from the list.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Add an unbound WQ type to the new CQ API

The upstream kernel commit cited below modified the workqueue in the
new CQ API to be bound to a specific CPU (instead of being unbound).
This caused ALL users of the new CQ API to use the same bound WQ.

Specifically, MAD handling was severely delayed when the CPU bound
to the WQ was busy handling (higher priority) interrupts.

This caused a delay in the MAD "heartbeat" response handling,
which resulted in ports being incorrectly classified as "down".

To fix this, add a new "unbound" WQ type to the new CQ API, so that users
have the option to choose either a bound WQ or an unbound WQ.

For MADs, choose the new "unbound" WQ.

Fixes: b7363e67b23e ("IB/device: Convert ib-comp-wq to be CPU-bound")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.m>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Remove {create,destroy}_ah from mandatory verbs

{create,destroy}_ah aren't mandatory verbs, because not all providers
are implementing them.

Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB: Replace ib_query_gid/ib_get_cached_gid with rdma_query_gid

If the gid_attr argument is NULL then the functions behave identically to
rdma_query_gid. ib_query_gid just calls ib_get_cached_gid, so everything
can be consolidated to one function.

Now that all callers either use rdma_query_gid() or ib_get_cached_gid(),
ib_query_gid() API is removed.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

treewide: kzalloc() -> kcalloc()

The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:

kzalloc(a * b, gfp)

with:
kcalloc(a * b, gfp)

as well as handling cases of:

kzalloc(a * b * c, gfp)

with:

kzalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

kzalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

kzalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
kzalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kzalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
kzalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kzalloc
+ kcalloc
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
kzalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
kzalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
kzalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
kzalloc(sizeof(THING) * C2, ...)
|
kzalloc(sizeof(TYPE) * C2, ...)
|
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * E2
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- E1 * E2
+ E1, E2
, ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>

RDMA/core: Remove indirection through ib_cache_setup()

This once might have made sense when cache.c was in a different module
from device.c, but today it just obfuscation. Get rid of the wrappers
and call roge_gid_mgmt_init()/cleanup() directly.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>

IB/core: Simplify ib_query_gid to always refer to cache

Currently following inconsistencies exist.
1. ib_query_gid() returns GID from the software cache for a RoCE port
and returns GID from the HCA for an IB port.
This is incorrect because software GID cache is maintained regardless
of HCA port type.

2. GID is queries from the HCA via ib_query_gid and updated in the
software cache for IB link layer. Both of them might not be in sync.

ULPs such as SRP initiator, SRP target, IPoIB driver have historically
used ib_query_gid() API to query the GID. However CM used cached version
during CM processing, When software cache was introduced, this
inconsitency remained.

In order to simplify, improve readability and avoid link layer
specific above inconsistencies, this patch brings following changes.

1. ib_query_gid() always refers to the cache layer regardless of link
layer.

2. cache module who reads the GID entry from HCA and builds the cache,
directly invokes the HCA provider verb's query_gid() callback function.

3. ib_query_port() is being called in early stage where GID cache is not
yet build while reading port immutable property. Therefore it needs to
read the default GID from the HCA for IB link layer to publish the
subnet prefix.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/providers: Simplify query_gid callback of RoCE providers

ib_query_gid() fetches the GID from the software cache maintained in
ib_core for RoCE ports.

Therefore, simplify the provider drivers for RoCE to treat query_gid()
callback as never called for RoCE, and only require non-RoCE devices to
implement it.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Search GID only for IB link layer

Even though API is only used by IPoIB driver, its incorrect to refer
RoCE GID table property to search for GID.

Look for only IB link layer to search for the GID.

Fixes: dbb12562f7c2 ("IB/{core, ipoib}: Simplify ib_find_gid to search only for IB link layer")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Refer to RoCE port property instead of GID table property

ib_query_gid() in commit [1] refers to RoCE GID table capability of
the HCA using rdma_cap_roce_gid_table().
ib_core maintains the GID table cache regardless of the HCA provider
drivers capability to maintain RoCE GID table.
Therefore, whether to return a GID table entry from the software cache or
from HCA should be done based on whether the port is RoCE or not.

[1] commit 03db3a2d81e6 ("IB/core: Add RoCE GID table management")

Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/restrack: Move restrack_clean to be symmetrical to restrack_init

The fact that resource tracking commit 02d8883f520e ("RDMA/restrack: Add
general infrastructure to track RDMA resources") was added immediately
after commit 16c1975f1032 ("IB/mlx5: Create profile infrastructure to add
and remove stages") caused us to miss the fact that PD and CQ are created
after ib_register_device, but released after ib_unregister_device() and
not before as it is expected from normal flow.

Fix introduced in commit 42cea83f9524 ("IB/mlx5: Fix cleanup order on
unload") revealed this fact, so this patch is needed to avoid from
restrack warnings

It fixes resource tracking warnings during shutdown.

[ 43.473906] CPU: 5 PID: 3016 Comm: modprobe Not tainted 4.16.0-rc5-for-linust-perf-2018-03-19_07-01-58-14 #1
[ 43.473907] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[ 43.473919] RIP: 0010:rdma_restrack_clean+0x25/0x30 [ib_core]
[ 43.473921] RSP: 0018:ffffc9000267be48 EFLAGS: 00010282
[ 43.473924] RAX: 0000000000000000 RBX: ffff88033c690070 RCX: 0000000180080006
[ 43.473925] RDX: ffff88035ce922e0 RSI: ffffea000cf1a200 RDI: ffff88033c6907c8
[ 43.473926] RBP: ffff88033c690070 R08: ffff88033c689000 R09: 0000000180080006
[ 43.473927] R10: 000000003c68a001 R11: ffff88033c689000 R12: ffff88033c690000
[ 43.473929] R13: ffff88033c69005c R14: 0000000000000000 R15: 0000000000000000
[ 43.473932] FS: 00007f5928359740(0000) GS:ffff88036c540000(0000) knlGS:0000000000000000
[ 43.473933] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 43.473935] CR2: 00007ffffc760cc8 CR3: 000000035620c000 CR4: 00000000000006e0
[ 43.473940] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 43.473941] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 43.473942] Call Trace:
[ 43.473969] ib_unregister_device+0xf5/0x190 [ib_core]
[ 43.474000] __mlx5_ib_remove+0x2e/0x40 [mlx5_ib]
[ 43.474098] mlx5_remove_device+0xf5/0x120 [mlx5_core]
[ 43.474132] mlx5_unregister_interface+0x37/0x90 [mlx5_core]
[ 43.474142] mlx5_ib_cleanup+0xc/0x16a [mlx5_ib]
[ 43.474152] SyS_delete_module+0x159/0x260
[ 43.474159] do_syscall_64+0x61/0x110
[ 43.474165] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 43.474168] RIP: 0033:0x7f59278466b7
[ 43.474170] RSP: 002b:00007ffffc763e38 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0
[ 43.474172] RAX: ffffffffffffffda RBX: 000000000130d590 RCX: 00007f59278466b7
[ 43.474173] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000000000130d5f8
[ 43.474175] RBP: 0000000000000000 R08: 00007f5927b0b060 R09: 00007f59278b6a40
[ 43.474176] R10: 00007ffffc763bc0 R11: 0000000000000202 R12: 0000000000000000
[ 43.474177] R13: 0000000000000001 R14: 000000000130d5f8 R15: 0000000000000000
[ 43.474179] Code: 84 00 00 00 00 00 0f 1f 44 00 00 48 83 c7 28 31 c0
eb 0c 48 83 c0 08 48 3d 00 08 00 00 74 0f 48 8d 14 07 48 8b 12 48 85 d2
74 e8 <0f> 0b c3 f3 c3 66 0f 1f 44 00 00 0f 1f 44 00 00 53 48 8b 47 28
[ 43.474221] ---[ end trace e89771e2250ffc23 ]---

Fixes: 42cea83f9524 ("IB/mlx5: Fix cleanup order on unload")
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/{core, ipoib}: Simplify ib_find_gid() for unused ndev

ib_find_gid() is only used by IPoIB driver. For IB link layer, GID table
entries are not based on netdevice. Netdevice parameter is unused here.
Therefore, it is removed.

Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Fix missing RDMA cgroups release in case of failure to register device

During IB device registration process, if query_device() fails or if
ib_core fails to registers sysfs entries, rdma cgroup cleanup is
skipped.

Cc: <stable@vger.kernel.org> # v4.2+
Fixes: 4be3a4fa51f4 ("IB/core: Fix kernel crash during fail to initialize device")
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/restrack: Add general infrastructure to track RDMA resources

The RDMA subsystem has very strict set of objects to work with, but it
completely lacks tracking facilities and has no visibility of resource
utilization.

The following patch adds such infrastructure to keep track of RDMA
resources to help with debugging of user space applications. The primary
user of this infrastructure is RDMA nldev netlink (following patches), to
be exposed to userspace via rdmatool, but it is not limited too that.

At this stage, the main three objects (PD, CQ and QP) are added, and more
will be added later.

Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Fix two kernel warnings triggered by rxe registration

Eliminate the WARN_ONs that create following two warnings when
registering an rxe device:

WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/device.c:449 ib_register_device+0x591/0x640 [ib_core]
CPU: 2 PID: 1005 Comm: run_tests Not tainted 4.15.0-rc4-dbg+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:ib_register_device+0x591/0x640 [ib_core]
Call Trace:
rxe_register_device+0x3c6/0x470 [rdma_rxe]
rxe_add+0x543/0x5e0 [rdma_rxe]
rxe_net_add+0x37/0xb0 [rdma_rxe]
rxe_param_set_add+0x5a/0x120 [rdma_rxe]
param_attr_store+0x5e/0xc0
module_attr_store+0x19/0x30
sysfs_kf_write+0x3d/0x50
kernfs_fop_write+0x116/0x1a0
__vfs_write+0x23/0x120
vfs_write+0xbe/0x1b0
SyS_write+0x44/0xa0
entry_SYSCALL_64_fastpath+0x23/0x9a

WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/sysfs.c:1279 ib_device_register_sysfs+0x11d/0x160 [ib_core]
CPU: 2 PID: 1005 Comm: run_tests Tainted: G W 4.15.0-rc4-dbg+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:ib_device_register_sysfs+0x11d/0x160 [ib_core]
Call Trace:
ib_register_device+0x3f7/0x640 [ib_core]
rxe_register_device+0x3c6/0x470 [rdma_rxe]
rxe_add+0x543/0x5e0 [rdma_rxe]
rxe_net_add+0x37/0xb0 [rdma_rxe]
rxe_param_set_add+0x5a/0x120 [rdma_rxe]
param_attr_store+0x5e/0xc0
module_attr_store+0x19/0x30
sysfs_kf_write+0x3d/0x50
kernfs_fop_write+0x116/0x1a0
__vfs_write+0x23/0x120
vfs_write+0xbe/0x1b0
SyS_write+0x44/0xa0
entry_SYSCALL_64_fastpath+0x23/0x9a

The code should accept either a parent pointer or a fully specified DMA
specification without producing warnings.

Fixes: 99db9494035f ("IB/core: Remove ib_device.dma_device")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: stable@vger.kernel.org # v4.11
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/netlink: Fix locking around __ib_get_device_by_index

Holding locks is mandatory when calling __ib_device_get_by_index,
otherwise there are races during the list iteration with device removal.

Since the locks are static to device.c, __ib_device_get_by_index can
never be called correctly by any user out side the file.

Make the function static and provide a safe function that gets the
correct locks and returns a kref'd pointer. Fix all callers.

Fixes: e5c9469efcb1 ("RDMA/netlink: Add nldev device doit implementation")
Fixes: c3f66f7b0052 ("RDMA/netlink: Implement nldev port doit callback")
Fixes: 7d02f605f0dc ("RDMA/netlink: Add nldev port dumpit implementation")
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Replace open-coded variant of put_device

There is an existing function to decrease reference counter
of the device, let's use it.

Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/{core, ipoib}: Simplify ib_find_gid to search only for IB link layer

Currently there are no users of ib_find_gid for RoCE transport. It is
only used by IPoIB.
Therefore its simplified to ignore RoCE ports and GID type check which
was previously done for every port.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/netlink: Fix general protection fault

The RDMA netlink core code checks validity of messages by ensuring
that type and operand are in range. It works well for almost all
clients except NLDEV, which has cb_table less than number of operands.

Request to access such operand will trigger the following kernel panic.

This patch updates all places where cb_table is declared for the
consistency, but only NLDEV is actually need it.

general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
Modules linked in:
CPU: 0 PID: 522 Comm: syz-executor6 Not tainted 4.13.0+ #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
task: ffff8800657799c0 task.stack: ffff8800695d000
RIP: 0010:rdma_nl_rcv_msg+0x13a/0x4c0
RSP: 0018:ffff8800695d7838 EFLAGS: 00010207
RAX: dffffc0000000000 RBX: 1ffff1000d2baf0b RCX: 00000000704ff4d7
RDX: 0000000000000000 RSI: ffffffff81ddb03c RDI: 00000003827fa6bc
RBP: ffff8800695d7900 R08: ffffffff82ec0578 R09: 0000000000000000
R10: ffff8800695d7900 R11: 0000000000000001 R12: 000000000000001c
R13: ffff880069d31e00 R14: 00000000ffffffff R15: ffff880069d357c0
FS: 00007fee6acb8700(0000) GS:ffff88006ca00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000201a9000 CR3: 0000000059766000 CR4: 00000000000006b0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? rdma_nl_multicast+0x80/0x80
rdma_nl_rcv+0x36b/0x4d0
? ibnl_put_attr+0xc0/0xc0
netlink_unicast+0x4bd/0x6d0
? netlink_sendskb+0x50/0x50
? drop_futex_key_refs.isra.4+0x68/0xb0
netlink_sendmsg+0x9ab/0xbd0
? nlmsg_notify+0x140/0x140
? wake_up_q+0xa1/0xf0
? drop_futex_key_refs.isra.4+0x68/0xb0
sock_sendmsg+0x88/0xd0
sock_write_iter+0x228/0x3c0
? sock_sendmsg+0xd0/0xd0
? do_futex+0x3e5/0xb20
? iov_iter_init+0xaf/0x1d0
__vfs_write+0x46e/0x640
? sched_clock_cpu+0x1b/0x190
? __vfs_read+0x620/0x620
? __fget+0x23a/0x390
? rw_verify_area+0xca/0x290
vfs_write+0x192/0x490
SyS_write+0xde/0x1c0
? SyS_read+0x1c0/0x1c0
? trace_hardirqs_on_thunk+0x1a/0x1c
entry_SYSCALL_64_fastpath+0x18/0xad
RIP: 0033:0x7fee6a74a219
RSP: 002b:00007fee6acb7d58 EFLAGS: 00000212 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000638000 RCX: 00007fee6a74a219
RDX: 0000000000000078 RSI: 0000000020141000 RDI: 0000000000000006
RBP: 0000000000000046 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000212 R12: ffff8800695d7f98
R13: 0000000020141000 R14: 0000000000000006 R15: 00000000ffffffff
Code: d6 48 b8 00 00 00 00 00 fc ff df 66 41 81 e4 ff 03 44 8d 72 ff 4a 8d 3c b5 c0 a6 7f 82 44 89 b5 4c ff ff ff 48 89 f9 48 c1 e9 03 <0f> b6 0c 01 48 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85
RIP: rdma_nl_rcv_msg+0x13a/0x4c0 RSP: ffff8800695d7838
---[ end trace ba085d123959c8ec ]---
Kernel panic - not syncing: Fatal exception

Cc: syzkaller <syzkaller@googlegroups.com>
Fixes: b4c598a67ea1 ("RDMA/netlink: Implement nldev device dumpit calback")
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Init subsys if compiled to vmlinuz-core

Once infiniband is compiled as a core component its subsystem must be
enabled before device initialization. Otherwise there is a NULL pointer
dereference during mlx4_core init, calltrace:
->device_add
if (dev->class) {
deref dev->class->p =>NULLPTR

#Config
CONFIG_NET_DEVLINK=y
CONFIG_MAY_USE_DEVLINK=y
CONFIG_MLX4_EN=y

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB: Avoid ib_modify_port() failure for RoCE devices

IB CM calls ib_modify_port() irrespective of link layer. If the
failure is returned, the mad agent gets unregistered for those
devices. Recently, modify_port() hook was removed from some of the
low level drivers as it was always returning success. This breaks
rdma connection establishment over those devices.
For ethernet devices, Qkey violation and port capabilities are not
applicable. So returning success for RoCE when modify_port hook is
is not implemented.

Cc: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/(core, ulp): Convert register/unregister event handler to be void

The functions ib_register_event_handler() and
ib_unregister_event_handler() always returned success and they can't fail.

Let's convert those functions to be void, remove redundant checks and
cleanup tons of goto statements.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

rdma: Autoload netlink client modules

If a message comes in and we do not have the client in the table, then
try to load the module supplying that client using MODULE_ALIAS to find
it.

This duplicates the scheme seen in other netlink muxes (eg nfnetlink).

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/core: make ib_device.add method optional

ib_clients can indeed fill .add to NULL, but then they will not see
any device removal notifications. The reason is that that
ib_register_client and ib_register_device checked existence of .add
before adding the creating a corresponding client_data and adding
it to the list. Simple condition reverse fixes the issue.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Protect sysfs entry on ib_unregister_device

ib_unregister_device is not protecting removal of sysfs entries.
A call to ib_register_device in that window can result in
duplicate sysfs entry warning. Move mutex_unlock to after
ib_device_unregister_sysfs to protect against sysfs entry creation.

This issue is exposed during driver load/unload stress test.

WARNING: CPU: 5 PID: 4445 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x5f/0x70
sysfs: cannot create duplicate filename '/class/infiniband/i40iw0'
Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Q87M-D2H
BIOS F7 01/17/2014
Workqueue: i40e i40e_service_task [i40e]
Call Trace:
dump_stack+0x67/0x98
__warn+0xcc/0xf0
warn_slowpath_fmt+0x4a/0x50
? kernfs_path_from_node+0x4b/0x60
sysfs_warn_dup+0x5f/0x70
sysfs_do_create_link_sd.isra.2+0xb7/0xc0
sysfs_create_link+0x20/0x40
device_add+0x28c/0x600
ib_device_register_sysfs+0x58/0x170 [ib_core]
ib_register_device+0x325/0x570 [ib_core]
? i40iw_register_rdma_device+0x1f4/0x400 [i40iw]
? kmem_cache_alloc_trace+0x143/0x330
? __raw_spin_lock_init+0x2d/0x50
i40iw_register_rdma_device+0x2dc/0x400 [i40iw]
i40iw_open+0x10a6/0x1950 [i40iw]
? i40iw_open+0xeab/0x1950 [i40iw]
? i40iw_make_cm_node+0x9c0/0x9c0 [i40iw]
i40e_client_subtask+0xa4/0x110 [i40e]
i40e_service_task+0xc2d/0x1320 [i40e]
process_one_work+0x203/0x710
? process_one_work+0x16f/0x710
worker_thread+0x126/0x4a0
? trace_hardirqs_on+0xd/0x10
kthread+0x112/0x150
? process_one_work+0x710/0x710
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x2e/0x40
---[ end trace fd11b69e21ea7653 ]---
Couldn't register device i40iw0 with driver model

Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA: Simplify get firmware interface

There is a need to forward FW version to user space
application through RDMA netlink. In order to make it safe, there
is need to declare nla_policy and limit the size of FW string.

The new define IB_FW_VERSION_NAME_MAX will limit the size of
FW version string. That define was chosen to be equal to
ETHTOOL_FWVERS_LEN, because many drivers anyway are limited
by that value indirectly.

The introduction of this define allows us to remove the string size
from get_fw_str function signature.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

RDMA/netlink: Add nldev initialization flows

Add nldev init and exit flows to the RDMA/core.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>

RDMA/netlink: Convert LS to doit callback

RDMA_NL_LS protocol is actually does not dump anything,
but sets data and it should be handled by doit callback.

This patch actually converts RDMA_NL_LS to doit callback, while
preserving IWCM and RDMA_CM flows through netlink_dump_start().

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>

RDMA/core: Add and expose static device index

This patch adds static device index in similar fashion to
already available in netdev world (struct net->ifindex).

In downstream patches, the RDMA nelink will use this idx-to-ib_device
conversion, so as part of this commit, we are exposing the translation
function to be visible for IB/core users.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

RDMA/core: Add iterator over ib_devices

The coming nldev needs to iterate over all IB devices in the system
and in order to not expose the ib_devices list outside the devices.c,
it is necessary to provide function iterator.

Current version is written explicitly for nldev callback to avoid
over-engineering at this stage, but it can be easily extended for
other types.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>

RDMA/netlink: Rename netlink callback struct

The RDMA netlink client infrastructure was removed and made obsolete.
The old infrastructure defined struct ibnl_client_cbs. Now that all
uses of this have been updated to the new infrastructure, rename the
struct to be compliant with the current stack naming standards:
struct rdma_nl_cbs.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>

RDMA/netlink: Add flag to consolidate common handling

Add ability to provide flags to control RDMA netlink callbacks
and convert addr.c and sa_query.c to be first users of such
infrastructure. It allows to move their CAP_NET_ADMIN checks
into netlink core.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>

RDMA/netlink: Remove netlink clients infrastructure

RDMA netlink has a complicated infrastructure for dynamically
registering and de-registering netlink clients to the NETLINK_RDMA
group. The complicated portion of this code is not widely used because
2 of the 3 current clients are statically compiled together with
netlink.c. The infrastructure, therefore, is deemed overkill.

Refactor the code to eliminate the dynamically added clients. Now all
clients are pre-registered in a client array at compile time, and at run
time they merely check-in with the infrastructure to pass their callback
table for inclusion in the pre-sized client array.

This also allows for future cleanups and removal of unneeded code in the
iwcm* netlink handler.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Chien Tin Tung <chien.tin.tung@intel.com>

IB/core: Fix static analysis warning in ib_policy_change_task

ib_get_cached_subnet_prefix can technically fail, but the only way it
could is not possible based on the loop conditions. Check the return
value before using the variable sp to resolve a static analysis warning.

-v1:
- Fix check to !ret. Paul Moore

Fixes: 8f408ab64be6 ("selinux lsm IB/core: Implement LSM notification
system")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

selinux lsm IB/core: Implement LSM notification system

Add a generic notificaiton mechanism in the LSM. Interested consumers
can register a callback with the LSM and security modules can produce
events.

Because access to Infiniband QPs are enforced in the setup phase of a
connection security should be enforced again if the policy changes.
Register infiniband devices for policy change notification and check all
QPs on that device when the notification is received.

Add a call to the notification mechanism from SELinux when the AVC
cache changes or setenforce is cleared.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

IB/core: Enforce PKey security on QPs

Add new LSM hooks to allocate and free security contexts and check for
permission to access a PKey.

Allocate and free a security context when creating and destroying a QP.
This context is used for controlling access to PKeys.

When a request is made to modify a QP that changes the port, PKey index,
or alternate path, check that the QP has permission for the PKey in the
PKey table index on the subnet prefix of the port. If the QP is shared
make sure all handles to the QP also have access.

Store which port and PKey index a QP is using. After the reset to init
transition the user can modify the port, PKey index and alternate path
independently. So port and PKey settings changes can be a merge of the
previous settings and the new ones.

In order to maintain access control if there are PKey table or subnet
prefix change keep a list of all QPs are using each PKey index on
each port. If a change occurs all QPs using that device and port must
have access enforced for the new cache settings.

These changes add a transaction to the QP modify process. Association
with the old port and PKey index must be maintained if the modify fails,
and must be removed if it succeeds. Association with the new port and
PKey index must be established prior to the modify and removed if the
modify fails.

1. When a QP is modified to a particular Port, PKey index or alternate
path insert that QP into the appropriate lists.

2. Check permission to access the new settings.

3. If step 2 grants access attempt to modify the QP.

4a. If steps 2 and 3 succeed remove any prior associations.

4b. If ether fails remove the new setting associations.

If a PKey table or subnet prefix changes walk the list of QPs and
check that they have permission. If not send the QP to the error state
and raise a fatal error event. If it's a shared QP make sure all the
QPs that share the real_qp have permission as well. If the QP that
owns a security structure is denied access the security structure is
marked as such and the QP is added to an error_list. Once the moving
the QP to error is complete the security structure mark is cleared.

Maintaining the lists correctly turns QP destroy into a transaction.
The hardware driver for the device frees the ib_qp structure, so while
the destroy is in progress the ib_qp pointer in the ib_qp_security
struct is undefined. When the destroy process begins the ib_qp_security
structure is marked as destroying. This prevents any action from being
taken on the QP pointer. After the QP is destroyed successfully it
could still listed on an error_list wait for it to be processed by that
flow before cleaning up the structure.

If the destroy fails the QPs port and PKey settings are reinserted into
the appropriate lists, the destroying flag is cleared, and access control
is enforced, in case there were any cache changes during the destroy
flow.

To keep the security changes isolated a new file is used to hold security
related functionality.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Acked-by: Doug Ledford <dledford@redhat.com>
[PM: merge fixup in ib_verbs.h and uverbs_cmd.c]
Signed-off-by: Paul Moore <paul@paul-moore.com>

IB/core: Fix kernel crash during fail to initialize device

This patch fixes the kernel crash that occurs during ib_dealloc_device()
called due to provider driver fails with an error after
ib_alloc_device() and before it can register using ib_register_device().

This crashed seen in tha lab as below which can occur with any IB device
which fails to perform its device initialization before invoking
ib_register_device().

This patch avoids touching cache and port immutable structures if device
is not yet initialized.
It also releases related memory when cache and port immutable data
structure initialization fails during register_device() state.

[81416.561946] BUG: unable to handle kernel NULL pointer dereference at (null)
[81416.570340] IP: ib_cache_release_one+0x29/0x80 [ib_core]
[81416.576222] PGD 78da66067
[81416.576223] PUD 7f2d7c067
[81416.579484] PMD 0
[81416.582720]
[81416.587242] Oops: 0000 [#1] SMP
[81416.722395] task: ffff8807887515c0 task.stack: ffffc900062c0000
[81416.729148] RIP: 0010:ib_cache_release_one+0x29/0x80 [ib_core]
[81416.735793] RSP: 0018:ffffc900062c3a90 EFLAGS: 00010202
[81416.741823] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
[81416.749785] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff880859fec000
[81416.757757] RBP: ffffc900062c3aa0 R08: ffff8808536e5ac0 R09: ffff880859fec5b0
[81416.765708] R10: 00000000536e5c01 R11: ffff8808536e5ac0 R12: ffff880859fec000
[81416.773672] R13: 0000000000000000 R14: ffff8808536e5ac0 R15: ffff88084ebc0060
[81416.781621] FS: 00007fd879fab740(0000) GS:ffff88085fac0000(0000) knlGS:0000000000000000
[81416.790522] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[81416.797094] CR2: 0000000000000000 CR3: 00000007eb215000 CR4: 00000000003406e0
[81416.805051] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[81416.812997] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[81416.820950] Call Trace:
[81416.824226] ib_device_release+0x1e/0x40 [ib_core]
[81416.829858] device_release+0x32/0xa0
[81416.834370] kobject_cleanup+0x63/0x170
[81416.839058] kobject_put+0x25/0x50
[81416.843319] ib_dealloc_device+0x25/0x40 [ib_core]
[81416.848986] mlx5_ib_add+0x163/0x1990 [mlx5_ib]
[81416.854414] mlx5_add_device+0x5a/0x160 [mlx5_core]
[81416.860191] mlx5_register_interface+0x8d/0xc0 [mlx5_core]
[81416.866587] ? 0xffffffffa09e9000
[81416.870816] mlx5_ib_init+0x15/0x17 [mlx5_ib]
[81416.876094] do_one_initcall+0x51/0x1b0
[81416.880861] ? __vunmap+0x85/0xd0
[81416.885113] ? kmem_cache_alloc_trace+0x14b/0x1b0
[81416.890768] ? vfree+0x2e/0x70
[81416.894762] do_init_module+0x60/0x1fa
[81416.899441] load_module+0x15f6/0x1af0
[81416.904114] ? __symbol_put+0x60/0x60
[81416.908709] ? ima_post_read_file+0x3d/0x80
[81416.913828] ? security_kernel_post_read_file+0x6b/0x80
[81416.920006] SYSC_finit_module+0xa6/0xf0
[81416.924888] SyS_finit_module+0xe/0x10
[81416.929568] entry_SYSCALL_64_fastpath+0x1a/0xa9
[81416.935089] RIP: 0033:0x7fd879494949
[81416.939543] RSP: 002b:00007ffdbc1b4e58 EFLAGS: 00000202 ORIG_RAX: 0000000000000139
[81416.947982] RAX: ffffffffffffffda RBX: 0000000001b66f00 RCX: 00007fd879494949
[81416.955965] RDX: 0000000000000000 RSI: 000000000041a13c RDI: 0000000000000003
[81416.963926] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000001b652a0
[81416.971861] R10: 0000000000000003 R11: 0000000000000202 R12: 00007ffdbc1b3e70
[81416.979763] R13: 00007ffdbc1b3e50 R14: 0000000000000005 R15: 0000000000000000
[81417.008005] RIP: ib_cache_release_one+0x29/0x80 [ib_core] RSP: ffffc900062c3a90
[81417.016045] CR2: 0000000000000000

Fixes: 55aeed0654 ("IB/core: Make ib_alloc_device init the kobject")
Fixes: 7738613e7c ("IB/core: Add per port immutable struct to ib_device")
Cc: <stable@vger.kernel.org> # v4.2+
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/device: Convert ib-comp-wq to be CPU-bound

This workqueue is used by our storage target mode ULPs
via the new CQ API. Recent observations when working
with very high-end flash storage devices reveal that
UNBOUND workqueue threads can migrate between cpu cores
and even numa nodes (although some numa locality is accounted
for).

While this attribute can be useful in some workloads,
it does not fit in very nicely with the normal
run-to-completion model we usually use in our target-mode
ULPs and the block-mq irq<->cpu affinity facilities.

The whole block-mq concept is that the completion will
land on the same cpu where the submission was performed.
The fact that our submitter thread is migrating cpus
can break this locality.

We assume that as a target mode ULP, we will serve multiple
initiators/clients and we can spread the load enough without
having to use unbound kworkers.

Also, while we're at it, expose this workqueue via sysfs which
is harmless and can be useful for debug.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>--
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Restore I/O MMU, s390 and powerpc support

Avoid that the following error message is reported on the console
while loading an RDMA driver with I/O MMU support enabled:

DMAR: Allocating domain for mlx5_0 failed

Ensure that DMA mapping operations that use to_pci_dev() to
access to struct pci_dev see the correct PCI device. E.g. the s390
and powerpc DMA mapping operations use to_pci_dev() even with I/O
MMU support disabled.

This patch preserves the following changes of the DMA mapping updates
patch series:
- Introduction of dma_virt_ops.
- Removal of ib_device.dma_ops.
- Removal of struct ib_dma_mapping_ops.
- Removal of an if-statement from each ib_dma_*() operation.
- IB HW drivers no longer set dma_device directly.

Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reported-by: Parav Pandit <parav@mellanox.com>
Fixes: commit 99db9494035f ("IB/core: Remove ib_device.dma_device")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: parav@mellanox.com
Tested-by: parav@mellanox.com
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Add inline function to validate port

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Remove ib_device.dma_device

Add code in ib_register_device() for copying the DMA masks. Use
&ib_device.dev in DMA mapping operations instead of dma_device.
Remove ib_device.dma_device because due to this and previous patches
it is no longer used.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Initialize ib_device.dev.parent earlier

Move the ib_device.dev.parent initialization code from
ib_device_register_sysfs() to ib_register_device(). Additionally,
allow HBA drivers to set ib_device.dev.parent without setting
ib_device.dma_device. This is the first step towards removing
ib_device.dma_device.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: added support to use rdma cgroup controller

Added support APIs for IB core to register/unregister every IB/RDMA
device with rdma cgroup for tracking rdma resources.
IB core registers with rdma cgroup controller.
Added support APIs for uverbs layer to make use of rdma controller.
Added uverbs layer to perform resource charge/uncharge functionality.
Added support during query_device uverb operation to ensure it
returns resource limits by honoring rdma cgroup configured limits.

Signed-off-by: Parav Pandit <pandit.parav@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

IB/core: Remove debug prints after allocation failure

The prints after [k|v][m|z|c]alloc() functions are not needed,
because in case of failure, allocator will print their internal
error prints anyway.

Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Add get FW version string to the core

Allow for a common core function to get firmware version strings
from the individual devices.

In later patches this format can then then be used to pass a
properly formated version string through the IPoIB layer.

The problem with the current code in the IPoIB layer is that it is
specific to certain hardware types.

Furthermore, this gives us a common function through which the core
can provide a common sysfs entry. Eventually we may want to
remove the sysfs export but this provides for user space backwards
compatibility.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Fix query port failure in RoCE

Currently ib_query_port always attempts to to read the subnet prefix by
calling ib_query_gid(). For RoCE/iWARP there is no subnet manager and no
subnet prefix. Fix this by querying GID[0] only for IB networks.

Fixes: fad61ad4e755 ('IB/core: Add subnet prefix to port info')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: fix an error code in ib_core_init()

We should return the error code if ib_add_ibnl_clients() fails. The
current code returns success.

Fixes: 735c631ae99d ('IB/core: Register SA ibnl client during ib_core initialization')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Add IP to GID netlink offload

There is an assumption that rdmacm is used only between nodes
in the same IB subnet, this why ARP resolution can be used to turn
IP to GID in rdmacm.

When dealing with IB communication between subnets this assumption
is no longer valid. ARP resolution will get us the next hop device
address and not the peer node's device address.

To solve this issue, we will check user space if it can provide the
GID of the peer node, and fail if not.

We add a sequence number to identify each request and fill in the GID
upon answer from userspace.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Register SA ibnl client during ib_core initialization

Move SA ibnl client registration to ib_core module init.
This will allow us to register a single client to handle
all RDMA_NL_LS operations and make it SA independent.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/SA: Integrate ib_sa module into ib_core module

Consolidate ib_sa into ib_core, this commit eliminates
ib_sa.ko and makes it part of ib_core.ko

Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/MAD: Integrate ib_mad module into ib_core module

Consolidate ib_mad into ib_core, this commit eliminates
ib_mad.ko and makes it part of ib_core.ko

Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Integrate IB address resolution module into core

IB address resolution is declared as a module (ib_addr.ko) which loads
itself before IB core module (ib_core.ko).

It causes to the scenario where IB netlink which is initialized by IB
core can't be used by ib_addr.ko.

In order to solve it, we are converting ib_addr.ko to be part of
IB core module.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Add subnet prefix to port info

The subnet prefix is a part of the port_info MAD returned and should be
available at the ib_port_attr struct. We define it here and provide a
default implementation in case the hardware driver does not provide one.
The subnet prefix is required when creating the address vector to access
the SA in networks where GRH must be used.

Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: trivial prink cleanup.

1. Replaced printk with appropriate pr_warn, pr_err, pr_info.
2. Removed unnecessary prints around memory allocation failure
which are not required, as reported by the checkpatch script.

Signed-off-by: Parav Pandit <pandit.parav@gmail.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Fix missed clean call in registration path

In case of failure returned from query function in
IB device registration, we need to clean IB cache which
was missed.

This change fixes it.

Fixes: 3e153a93a1c1 ('IB/core: Save the device attributes on the device
structure')
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Add gid_type to gid attribute

In order to support multiple GID types, we need to store the gid_type
with each GID. This is also aligned with the RoCE v2 annex "RoCEv2 PORT
GID table entries shall have a "GID type" attribute that denotes the L3
Address type". The currently supported GID is IB_GID_TYPE_IB which is
also RoCE v1 GID type.

This implies that gid_type should be added to roce_gid_table meta-data.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Remove ib_query_device

The copy of the attributes present on the device is now used by all consumers
except for uverbs in case of serving user-space query, where dev->query_device
is called.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Save the device attributes on the device structure

This way both the IB core and upper level drivers can access these cached
device attributes rather than querying or caching them on their own.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB: add a proper completion queue abstraction

This adds an abstraction that allows ULPs to simply pass a completion
object and completion callback with each submitted WR and let the RDMA
core handle the nitty gritty details of how to handle completion
interrupts and poll the CQ.

In detail there is a new ib_cqe structure which just contains the
completion callback, and which can be used to get at the containing
object using container_of. It is pointed to by the WR and WC as an
alternative to the wr_id field, similar to how many ULPs already use
the field to store a pointer using casts.

A driver using the new completion callbacks allocates it's CQs using
the new ib_create_cq API, which in addition to the number of CQEs and
the completion vectors also takes a mode on how we poll for CQEs.
Three modes are available: direct for drivers that never take CQ
interrupts and just poll for them, softirq to poll from softirq context
using the to be renamed blk-iopoll infrastructure which takes care of
rearming and budgeting, or a workqueue for consumer who want to be
called from user context.

Thanks a lot to Sagi Grimberg who helped reviewing the API, wrote
the current version of the workqueue code because my two previous
attempts sucked too much and converted the iSER initiator to the new
API.

Signed-off-by: Christoph Hellwig <hch@lst.de>

IB/core: Expose and rename ib_find_cached_gid_by_port cache API

Sometime consumers might want to search for a GID in a specific port.
For example, when a WC arrives and we want to search the GID
that matches that port - it's better to search only the relevant
port.
Exposing and renaming ib_cache_gid_find_by_port in order to match
the naming convention of the module.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Add netdev and gid attributes paramteres to cache

Adding an ability to query the IB cache by a netdev and get the
attributes of a GID. These parameters are necessary in order to
successfully resolve the required GID (when the netdevice is known)
and get the Ethernet L2 attributes from a GID.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Remove needless bracketization

Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: missing curly braces in ib_find_gid()

Smatch says that, based on the indenting, we should probably add curly
braces here.

Fixes: 03db3a2d81e6 ('IB/core: Add RoCE GID table management')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Add RoCE GID table management

RoCE GIDs are based on IP addresses configured on Ethernet net-devices
which relate to the RDMA (RoCE) device port.

Currently, each of the low-level drivers that support RoCE (ocrdma,
mlx4) manages its own RoCE port GID table. As there's nothing which is
essentially vendor specific, we generalize that, and enhance the RDMA
core GID cache to do this job.

In order to populate the GID table, we listen for events:

(a) netdev up/down/change_addr events - if a netdev is built onto
our RoCE device, we need to add/delete its IPs. This involves
adding all GIDs related to this ndev, add default GIDs, etc.

(b) inet events - add new GIDs (according to the IP addresses)
to the table.

For programming the port RoCE GID table, providers must implement
the add_gid and del_gid callbacks.

RoCE GID management requires us to state the associated net_device
alongside the GID. This information is necessary in order to manage
the GID table. For example, when a net_device is removed, its
associated GIDs need to be removed as well.

RoCE mandates generating a default GID for each port, based on the
related net-device's IPv6 link local. In contrast to the GID based on
the regular IPv6 link-local (as we generate GID per IP address),
the default GID is also available when the net device is down (in
order to support loopback).

Locking is done as follows:
The patch modify the GID table code both for new RoCE drivers
implementing the add_gid/del_gid callbacks and for current RoCE and
IB drivers that do not. The flows for updating the table are
different, so the locking requirements are too.

While updating RoCE GID table, protection against multiple writers is
achieved via mutex_lock(&table->lock). Since writing to a table
requires us to find an entry (possible a free entry) in the table and
then modify it, this mutex protects both the find_gid and write_gid
ensuring the atomicity of the action.
Each entry in the GID cache is protected by rwlock. In RoCE, writing
(usually results from netdev notifier) involves invoking the vendor's
add_gid and del_gid callbacks, which could sleep.
Therefore, an invalid flag is added for each entry. Updates for RoCE are
done via a workqueue, thus sleeping is permitted.

In IB, updates are done in write_lock_irq(&device->cache.lock), thus
write_gid isn't allowed to sleep and add_gid/del_gid are not called.

When passing net-device into/out-of the GID cache, the device
is always passed held (dev_hold).

The code uses a single work item for updating all RDMA devices,
following a netdev or inet notifier.

The patch moves the cache from being a client (which was incorrect,
as the cache is part of the IB infrastructure) to being explicitly
initialized/freed when a device is registered/removed.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Make ib_alloc_device init the kobject

This gets rid of the weird in-between state where struct ib_device
was allocated but the kobject didn't work.

Consequently ib_device_release is now guaranteed to be called in
all situations and we needn't duplicate its kfrees on error paths.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Find the network device matching connection parameters

In the case of IPoIB, and maybe in other cases, the network device is
managed by an upper-layer protocol (ULP). In order to expose this
network device to other users of the IB device, let ULPs implement
a callback that returns network device according to connection parameters.

The IB device and port, together with the P_Key and the GID should
be enough to uniquely identify the ULP net device. However, in current
kernels there can be multiple IPoIB interfaces created with the same GID.
Furthermore, such configuration may be desireable to support ipvlan-like
configurations for RDMA CM with IPoIB. To resolve the device in these
cases the code will also take the IP address as an additional input.

Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Yotam Kenneth <yotamke@mellanox.com>
Signed-off-by: Shachar Raindel <raindel@mellanox.com>
Signed-off-by: Guy Shapiro <guysh@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: lock client data with lists_rwsem

An ib_client callback that is called with the lists_rwsem locked only for
read is protected from changes to the IB client lists, but not from
ib_unregister_device() freeing its client data. This is because
ib_unregister_device() will remove the device from the device list with
lists_rwsem locked for write, but perform the rest of the cleanup,
including the call to remove() without that lock.

Mark client data that is undergoing de-registration with a new going_down
flag in the client data context. Lock the client data list with lists_rwsem
for write in addition to using the spinlock, so that functions calling the
callback would be able to lock only lists_rwsem for read and let callbacks
sleep.

Since ib_unregister_client() now marks the client data context, no need for
remove() to search the context again, so pass the client data directly to
remove() callbacks.

Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Add rwsem to allow reading device list or client list

Currently the RDMA subsystem's device list and client list are protected by
a single mutex. This prevents adding user-facing APIs that iterate these
lists, since using them may cause a deadlock. The patch attempts to solve
this problem by adding a read-write semaphore to protect the lists. Readers
now don't need the mutex, and are safe just by read-locking the semaphore.

The ib_register_device, ib_register_client, ib_unregister_device, and
ib_unregister_client functions are modified to lock the semaphore for write
during their respective list modification. Also, in order to make sure
client callbacks are called only between add() and remove() calls, the code
is changed to only add items to the lists after the add() calls and remove
from the lists before the remove() calls.

This patch attempts to solve a similar need [1] that was seen in the RoCE
v2 patch series.

[1] http://www.spinics.net/lists/linux-rdma/msg24733.html

Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Matan Barak <matanb@mellanox.com>
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Add ability for drivers to report an alternate MAD size.

Add max MAD size to the device immutable data set and have all drivers that
support MADs report the current IB MAD size (IB_MGMT_MAD_SIZE) to the core.

Verify MAD size data in both the MAD core and when reading the immutable data.

OPA drivers will report alternate MAD sizes in subsequent patches.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Pass hardware specific data in query_device

Vendors should be able to pass vendor specific data to/from
user-space via query_device uverb. In order to do this,
we need to pass the vendors' specific udata.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Add timestamp_mask and hca_core_clock to query_device

In order to expose timestamp we need to expose two new attributes in
query_device to be used for CQ completion time-stamping:

timestamp_mask - how many bits are valid in the timestamp, where timestamp
values could be 64bits the most.

hca_core_clock - timestamp is given in HW cycles, the frequency in KHZ units
of the HCA, necessary in order to convert cycles to seconds.

This is added both to ib_query_device and its respective uverbs counterpart.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Convert core to use bitfield for caps

Remove query_protocol callback

Use the new Core Capability bits for:

rdma_protocol_*
rdma_cap_ib_mad
rdma_cap_ib_smi
rdma_cap_ib_cm
rdma_cap_iw_cm
rdma_cap_ib_sa
rdma_cap_ib_mcast
rdma_cap_af_ib
rdma_cap_eth_ah

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Add per port immutable struct to ib_device

As of commit 5eb620c81ce3 "IB/core: Add helpers for uncached GID and P_Key
searches"; pkey_tbl_len and gid_tbl_len are immutable data which are stored in
the ib_device.

The per port core capability flags to be added later are also immutable data to
be stored in the ib_device object.

In preparation for this create a structure for per port immutable data and
place the pkey and gid table lengths within this structure.

"get_port_immutable" is added as a mandatory device function to allow the
drivers to fill in this data.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Create common start/end port functions

Previously start_port and end_port were defined in 2 places, cache.c and
device.c and this prevented their use in other modules.

Make these common functions, change the name to reflect the rdma
name space, and update existing users.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/Verbs: Implement new callback query_protocol()

Add new callback query_protocol() and implement for each HW.

Mapping List:
node-type link-layer transport protocol
nes RNIC ETH IWARP IWARP
amso1100 RNIC ETH IWARP IWARP
cxgb3 RNIC ETH IWARP IWARP
cxgb4 RNIC ETH IWARP IWARP
usnic USNIC_UDP ETH USNIC_UDP USNIC_UDP
ocrdma IB_CA ETH IB IBOE
mlx4 IB_CA IB/ETH IB IB/IBOE
mlx5 IB_CA IB IB IB
ehca IB_CA IB IB IB
ipath IB_CA IB IB IB
mthca IB_CA IB IB IB
qib IB_CA IB IB IB

Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Handle table with full and partial membership for the same P_Key

Extend the cached and non-cached P_Key table lookups to handle limited
and full membership of the same P_Key to co-exist in the P_Key table.

This is necessary for SR-IOV, to allow for some guests would to have
the full membership P_Key in their virtual P_Key table, while other
guests on the same physical HCA would have the limited one.
To support this, we need both the limited and full membership P_Keys
to be present in the master's (hypervisor physical port) P_Key table.

The algorithm for handling P_Key tables which contain both the limited
and the full membership versions of the same P_Key works as follows:

When scanning the P_Key table for a 15-bit P_Key:

A. If there is a full member version of that P_Key anywhere in the
table, return its index (even if a limited-member version of the
P_Key exists earlier in the table).

B. If the full member version is not in the table, but the
limited-member version is in the table, return the index of the
limited P_Key.

Signed-off-by: Liran Liss <liranl@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

RDMA: Allow for NULL .modify_device() and .modify_port() methods

These methods don't make sense for iWARP devices, so rather than
forcing them to implement stubs, just return -ENOSYS in the core if
the hardware driver doesn't set .modify_device and/or .modify_port.

Signed-off-by: Roland Dreier <roland@purestorage.com>

RDMA: Add netlink infrastructure

Add basic RDMA netlink infrastructure that allows for registration of
RDMA clients for which data is to be exported and supplies message
construction callbacks.

Signed-off-by: Nir Muchtar <nirm@voltaire.com>

[ Reorganize a few things, add CONFIG_NET dependency. - Roland ]

Signed-off-by: Roland Dreier <roland@purestorage.com>

RDMA: Add error handling to ib_core_init()

Fail RDMA midlayer initialization if sysfs setup fails.

Signed-off-by: Nir Muchtar <nirm@voltaire.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

RDMA: Update workqueue usage

* ib_wq is added, which is used as the common workqueue for infiniband
instead of the system workqueue. All system workqueue usages
including flush_scheduled_work() callers are converted to use and
flush ib_wq.

* cancel_delayed_work() + flush_scheduled_work() converted to
cancel_delayed_work_sync().

* qib_wq is removed and ib_wq is used instead.

This is to prepare for deprecation of flush_scheduled_work().

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

IB/core: Allow device-specific per-port sysfs files

Add a new parameter to ib_register_device() so that low-level device
drivers can pass in a pointer to a callback function that will be
called for each port that is registered in sysfs. This allows
low-level device drivers to create files in

/sys/class/infiniband/<hca>/ports/<N>/

without having to poke through the internals of the RDMA sysfs handling.

There is no need for an unregister function since the kobject
reference will go to zero when ib_unregister_device() is called.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>