iio: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230515205048.19561-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: proximity: vcnl3020: Drop unnecessary alignment requirement for i2c device

I2C does not by default use buffers directly for DMA so there is
no need to ensure they are DMA safe.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220508175712.647246-88-jic23@kernel.org

iio: proximity: vcnl3020: remove iio_claim/release_direct

Remove iio_claim/release and change it on mutex accordingly in
vcnl3020_write_proxy_samp_freq.

Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Link: https://lore.kernel.org/r/20210722154420.915082-4-i.mikhaylov@yadro.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: proximity: vcnl3020: add periodic mode

Add the possibility to run proximity sensor in periodic measurement
mode with thresholds.

Reported-by: kernel test robot <lkp@intel.com> #repeated include
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Link: https://lore.kernel.org/r/20210722154420.915082-3-i.mikhaylov@yadro.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: proximity: vcnl3020: add DMA safe buffer

Add DMA safe buffer for bulk transfers.

Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Link: https://lore.kernel.org/r/20210722154420.915082-2-i.mikhaylov@yadro.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: proximity: vcnl3020: add proximity rate

Add the proximity rate optional option and handling of it for
vishay vcnl3020.

Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Link: https://lore.kernel.org/r/20210225201444.12983-2-i.mikhaylov@yadro.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: remove left-over parent assignments

These were found by doing some shell magic:
------------
for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do
if grep 'parent =' $file | grep -v trig | grep -vq devm_; then
echo "$file -> $(grep "parent =" $file)"
fi
done
-----------

The output is bearable [after the semantic patch is applied].
There is a mix of trigger assignments with some iio device parent
assignments that are removed via this patch.

JC: A few more added via inspection of all parent =
statements in drivers/iio. Some of these may just have crossed with this
series, others were less obvious to scripting due to some cross
file / module boundary calls.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: proximity: Add driver support for vcnl3020 proximity sensor

Proximity sensor driver based on light/vcnl4000.c code.
For now supports only the single on-demand measurement.

The VCNL3020 is a fully integrated proximity sensor. Fully
integrated means that the infrared emitter is included in the
package. It has 16-bit resolution. It includes a signal
processing IC and features standard I2C communication
interface. It features an interrupt function.

Datasheet: http://www.vishay.com/docs/84150/vcnl3020.pdf
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>