#
1975d167 |
|
05-May-2023 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
hwmon: Switch i2c drivers back to use .probe() After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230505131718.1210071-1-u.kleine-koenig@pengutronix.de [groeck: Added missing change in pmbus/acbel-fsg032.c] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
#
f2f394db |
|
18-Aug-2022 |
Wolfram Sang <wsa+renesas@sang-engineering.com> |
hwmon: move from strlcpy with unused retval to strscpy Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220818210014.6769-1-wsa+renesas@sang-engineering.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
#
ed5c2f5f |
|
15-Aug-2022 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
#
952a11ca |
|
24-Sep-2021 |
Paul Fertser <fercerpav@gmail.com> |
hwmon: cleanup non-bool "valid" data fields We have bool so use it consistently in all the drivers. The following Coccinelle script was used: @@ identifier T; type t = { char, int }; @@ struct T { ... - t valid; + bool valid; ... } @@ identifier v; @@ ( - v->valid = 0 + v->valid = false | - v->valid = 1 + v->valid = true ) followed by sed to fixup the comments: sed '/bool valid;/{s/!=0/true/;s/zero/false/}' Few whitespace changes were fixed manually. All modified drivers were compile-tested. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Link: https://lore.kernel.org/r/20210924195202.27917-1-fercerpav@gmail.com [groeck: Fixed up 'u8 valid' to 'boool valid' in atxp1.c] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
#
67487038 |
|
13-Aug-2020 |
Stephen Kitt <steve@sk2.org> |
hwmon: use simple i2c probe function Many hwmon drivers don't use the id information provided by the old i2c probe function, and the remainder can easily be adapted to the new form ("probe_new") by calling i2c_match_id explicitly. This avoids scanning the identifier tables during probes. Drivers which didn't use the id are converted as-is; drivers which did are modified as follows: * if the information in i2c_client is sufficient, that's used instead (client->name); * anything else is handled by calling i2c_match_id() with the same level of error-handling (if any) as before. A few drivers aren't included in this patch because they have a different set of maintainers. They will be covered by other patches. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200813160222.1503401-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
#
74ba9207 |
|
20-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
6cf0a91e |
|
04-Apr-2014 |
Jean Delvare <jdelvare@suse.de> |
hwmon: Avoid initializing the same field twice All hwmon drivers allocate their data structure with some form of kzalloc, so setting data fields to zero explicitly is a waste of time. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
|
#
7c81c60f |
|
29-Jan-2014 |
Jean Delvare <khali@linux-fr.org> |
Update Jean Delvare's e-mail address Signed-off-by: Jean Delvare <khali@linux-fr.org>
|
#
e2730bea |
|
18-Jun-2012 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (w83l785ts) Convert to use devm_ functions Convert to use devm_ functions to reduce code size and simplify the code. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
|
#
f187fc04 |
|
02-Jun-2012 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (w83l785ts) Simplify code and improve readability In probe function, rename new_client variable to client, and introduce local variable dev to point to client->dev, to simplify the code and improve readability. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
|
#
130067d7 |
|
19-Jan-2012 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (w83l785ts) Fix multi-line comments Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
#
f0967eea |
|
20-Jan-2012 |
Axel Lin <axel.lin@gmail.com> |
hwmon: convert drivers/hwmon/* to use module_i2c_driver() This patch converts the drivers in drivers/hwmon/* to use the module_i2c_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Corentin Labbe <corentin.labbe@geomatys.fr> Cc: Dirk Eibach <eibach@gdsys.de> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Guillaume Ligneul <guillaume.ligneul@gmail.com> Cc: David George <david.george@ska.ac.za> Cc: "Hans J. Koch" <hjk@hansjkoch.de> Cc: Marc Hulsman <m.hulsman@tudelft.nl> Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
|
#
59965425 |
|
08-Jan-2012 |
Frans Meulenbroeks <fransmeulenbroeks@gmail.com> |
hwmon: (w83l785ts) fix checkpatch issues fixed: ERROR: trailing whitespace + $ WARNING: please, no spaces at the start of a line + $ not fixed (did not want to break url): WARNING: line over 80 characters + * http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L785TS-S.pdf Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
|
#
1f86df49 |
|
14-Dec-2009 |
Jean Delvare <khali@linux-fr.org> |
i2c: Drop I2C_CLIENT_INSMOD_1 This macro simply declares an enum, so drivers might as well declare it themselves. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de>
|
#
c3813d6a |
|
14-Dec-2009 |
Jean Delvare <khali@linux-fr.org> |
i2c: Get rid of struct i2c_client_address_data Struct i2c_client_address_data only contains one field at this point, which makes its usefulness questionable. Get rid of it and pass simple address lists around instead. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de>
|
#
310ec792 |
|
14-Dec-2009 |
Jean Delvare <khali@linux-fr.org> |
i2c: Drop the kind parameter from detect callbacks The "kind" parameter always has value -1, and nobody is using it any longer, so we can remove it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de>
|
#
a1fa4cdc |
|
09-Dec-2009 |
Jean Delvare <khali@linux-fr.org> |
hwmon: (w83l785ts) Clean up detect function As kind is now hard-coded to -1, there is room for code clean-ups. Signed-off-by: Jean Delvare <khali@linux-fr.org>
|
#
dc18a418 |
|
16-Jul-2008 |
Jean Delvare <khali@linux-fr.org> |
hwmon: (w83l785ts) Convert to a new-style i2c driver The new-style w83l785ts driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>
|
#
4040c415 |
|
12-Feb-2008 |
Jean Delvare <khali@linux-fr.org> |
hwmon: (w83l785ts) Don't ask the user to report failures There's nothing we can do about read errors on the W83L785TS-S, so don't ask the user to report them. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
|
#
25e9c86d |
|
17-Feb-2008 |
Mark M. Hoffman <mhoffman@lightlink.com> |
hwmon: normal_i2c arrays should be const Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
|
#
7b501b1f |
|
03-Jan-2008 |
Jean Delvare <khali@linux-fr.org> |
hwmon: Discard useless I2C driver IDs Many I2C hwmon drivers define a driver ID but no other code references these, meaning that they are useless. Discard them, along with a few IDs which are defined but never used at all. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
|
#
1beeffe4 |
|
20-Aug-2007 |
Tony Jones <tonyj@suse.de> |
hwmon: Convert from class_device to device Convert from class_device to device for hwmon_device_register/unregister Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
|
#
ccc5c306 |
|
24-Sep-2006 |
Rudolf Marek <r.marek@assembler.cz> |
w83l785ts: Fix unchecked return status w83l785ts: Fix unchecked return status Fix the w83l785ts driver. Add error checking to device_create_file and also care to destroy the files upon exit. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
9a61bf63 |
|
18-Jan-2006 |
Ingo Molnar <mingo@elte.hu> |
[PATCH] hwmon: Semaphore to mutex conversions convert drivers/hwmon/*.c semaphore use to mutexes. the conversion was generated via scripts, and the result was validated automatically via a script as well. all affected hwmon drivers were build-tested. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
2b48716d |
|
06-Dec-2005 |
Greg Kroah-Hartman <gregkh@suse.de> |
[PATCH] I2C: Remove .owner setting from i2c_driver as it's no longer needed Now that i2c_add_driver() doesn't need the module owner to be set by hand, we can delete it from the drivers. This patch catches all of the drivers that I found in the current tree (if a driver sets the .owner by hand, it's not a problem, just not needed.) Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Jean Delvare <khali@linux-fr.org>
|
#
cdaf7934 |
|
26-Nov-2005 |
Laurent Riffard <laurent.riffard@free.fr> |
[PATCH] i2c: Drop i2c_driver.{owner,name}, 3 of 11 We should use the i2c_driver.driver's .name and .owner fields instead of the i2c_driver's ones. This patch updates the hwmon drivers. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
8a994755 |
|
26-Nov-2005 |
Jean Delvare <khali@linux-fr.org> |
[PATCH] i2c: Drop i2c_driver.flags, 2 of 3 Just about every i2c chip driver sets the I2C_DF_NOTIFY flag, so we can simply make it the default and drop the flag. If any driver really doesn't want to be notified when i2c adapters are added, that driver can simply omit to set .attach_adapter. This approach is also more robust as it prevents accidental NULL pointer dereferences. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
ba9c2e8d |
|
17-Oct-2005 |
Deepak Saxena <dsaxena@plexity.net> |
[PATCH] hwmon: kzalloc conversion Use kzalloc instead of kmalloc+memset in all hardware monitoring drivers. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
cb929eae |
|
25-Sep-2005 |
Jean Delvare <khali@linux-fr.org> |
[PATCH] hwmon: Minor w83l785ts optimization Using s8 instead of u8 to store temperature register values saves a few instructions on sysfs file read. The very same was done for several other drivers a while ago (lm63, lm83, lm90...) Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/hwmon/w83l785ts.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
|
#
709439a2 |
|
25-Sep-2005 |
Jean Delvare <khali@linux-fr.org> |
[PATCH] hwmon: w83l785ts converted to dynamic sysfs callbacks Convert the w83l785ts driver to use dynamic sysfs callbacks. This is a small driver so the benefit is thin, but still worth it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/hwmon/w83l785ts.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-)
|
#
f4b50261 |
|
31-Jul-2005 |
Jean Delvare <khali@linux-fr.org> |
[PATCH] hwmon: hwmon vs i2c, second round (06/11) The only thing left in i2c-sensor.h are module parameter definition macros. It's only an extension of what i2c.h offers, and this extension is not sensors-specific. As a matter of fact, a few non-sensors drivers use them. So we better merge them in i2c.h, and get rid of i2c-sensor.h altogether. Signed-off-by: Jean Delvare <khali@linux-fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
2ed2dc3c |
|
31-Jul-2005 |
Jean Delvare <khali@linux-fr.org> |
[PATCH] hwmon: hwmon vs i2c, second round (04/11) i2c_probe and i2c_detect now do the exact same thing and operate on the same data structure, so we can have everyone call i2c_probe. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
7bef5594 |
|
27-Jul-2005 |
Jean Delvare <khali@linux-fr.org> |
[PATCH] I2C: refactor message in i2c_detach_client We could refactor the error message 34 different i2c drivers print if i2c_detach_client() fails in this function itself. Saves quite a few lines of code. Documentation is updated to reflect that change. Note that this patch should be applied after Rudolf Marek's w83792d patches. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
5071860a |
|
19-Jul-2005 |
Jean Delvare <khali@linux-fr.org> |
[PATCH] I2C: Separate non-i2c hwmon drivers from i2c-core (7/9) Kill normal_isa in header files, documentation and all chip drivers, as it is no more used. normal_i2c could be renamed to normal, but I decided not to do so at the moment, so as to limit the number of changes. This might be done later as part of the i2c_probe/i2c_detect merge. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
943b0830 |
|
15-Jul-2005 |
Mark M. Hoffman <mhoffman@lightlink.com> |
[PATCH] I2C hwmon: add hwmon sysfs class to drivers This patch modifies sensors chip drivers to make use of the new sysfs class "hwmon". Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
8d5d45fb |
|
02-Jul-2005 |
Jean Delvare <khali@linux-fr.org> |
[PATCH] I2C: Move hwmon drivers (2/3) Part 2: Move the driver files themselves. Note that the patch "adds trailing whitespace", because it does move the files as-is, and some files happen to have trailing whitespace. From: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|