#
1975d167 |
|
05-May-2023 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
hwmon: Switch i2c drivers back to use .probe() After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230505131718.1210071-1-u.kleine-koenig@pengutronix.de [groeck: Added missing change in pmbus/acbel-fsg032.c] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
#
f2f394db |
|
18-Aug-2022 |
Wolfram Sang <wsa+renesas@sang-engineering.com> |
hwmon: move from strlcpy with unused retval to strscpy Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220818210014.6769-1-wsa+renesas@sang-engineering.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
#
9bf5dd8b |
|
13-Aug-2020 |
Stephen Kitt <steve@sk2.org> |
hwmon: (emc2103) use simple i2c probe This driver doesn't use the id information provided by the old i2c probe function, so it can trivially be converted to the simple ("probe_new") form. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200813162704.1517951-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
#
14b0e83d |
|
07-Jul-2020 |
Vishwas M <vishwas.reddy.vr@gmail.com> |
hwmon: (emc2103) fix unable to change fan pwm1_enable attribute This patch fixes a bug which does not let FAN mode to be changed from sysfs(pwm1_enable). i.e pwm1_enable can not be set to 3, it will always remain at 0. This is caused because the device driver handles the result of "read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg)" incorrectly. The driver thinks an error has occurred if the (result != 0). This has been fixed by changing the condition to (result < 0). Signed-off-by: Vishwas M <vishwas.reddy.vr@gmail.com> Link: https://lore.kernel.org/r/20200707142747.118414-1-vishwas.reddy.vr@gmail.com Fixes: 9df7305b5a86 ("hwmon: Add driver for SMSC EMC2103 temperature monitor and fan controller") Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
#
74ba9207 |
|
20-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
94bf70da |
|
10-Dec-2018 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (emc2103) Use permission specific SENSOR[_DEVICE]_ATTR variants Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readbility, and to reduce the chance of inconsistencies. Also replace any remaining S_<PERMS> in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/hwmon/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
#
4cd0183d |
|
22-Dec-2016 |
Julia Lawall <Julia.Lawall@lip6.fr> |
hwmon: (emc2103) use permission-specific DEVICE_ATTR variants Use DEVICE_ATTR_RO for read only attributes and DEVICE_ATTR_RW for read/write attributes. This simplifies the source code, improves readbility, and reduces the chance of inconsistencies. The conversion was done automatically using coccinelle. It was validated by compiling both the old and the new source code and comparing its text, data, and bss size. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> [groeck: Updated description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
#
ca1b10b8 |
|
04-Dec-2016 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (emc2103) Fix overflows seen when temperature limit attributes Writes into temperature limit attributes can overflow due to unbound values passed to DIV_ROUND_CLOSEST(). Cc: Steve Glendinning <steve.glendinning@shawell.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
#
54f0ffc4 |
|
26-May-2016 |
Dan Carpenter <dan.carpenter@oracle.com> |
hwmon: (emc2103) Fix typo in MODULE_PARM_DESC "apd" was intended here instead of "init". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jean Delvare <jdelvare@suse.de>
|
#
9dd304f8 |
|
19-Jul-2014 |
Axel Lin <axel.lin@ingics.com> |
hwmon: (emc2103) Convert to devm_hwmon_device_register_with_groups Use devm_hwmon_device_register_with_groups() to simplify the code a bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
#
f6c2dd20 |
|
06-Jul-2014 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (emc2103) Clamp limits instead of bailing out It is customary to clamp limits instead of bailing out with an error if a configured limit is out of the range supported by the driver. This simplifies limit configuration, since the user will not typically know chip and/or driver specific limits. Reviewed-by: Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
#
9bf3babf |
|
11-Feb-2014 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (emc2103) Return error from i2c_smbus_read_byte_data There is no reason to replace one error with another. smatch message: drivers/hwmon/emc2103.c:352 set_fan_div() info: why not propagate 'status' from i2c_smbus_read_byte_data() instead of (-5)? Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
#
1a3abbd0 |
|
10-Sep-2013 |
Sachin Kamat <sachin.kamat@linaro.org> |
hwmon: (emc2103) Fix return value kstrtol() returns appropriate error values. Use those instead of hardcoding. Silences several sparse messages of following type: "why not propagate 'result' from kstrtol() instead of (-22)?" Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
#
2a844c14 |
|
09-Jan-2013 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: Replace SENSORS_LIMIT with clamp_val SENSORS_LIMIT and the generic clamp_val have the same functionality, and clamp_val is more efficient. This patch reduces text size by 9052 bytes and bss size by 11624 bytes for x86_64 builds. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: George Joseph <george.joseph@fairview5.com> Acked-by: Jean Delvare <khali@linux-fr.org>
|
#
59da32d8 |
|
02-Jun-2012 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (emc2103) Convert to use devm_ functions Convert to use devm_ functions to reduce code size and simplify the code. Cc: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
#
90b24cfb |
|
15-Apr-2012 |
Steve Glendinning <steve.glendinning@shawell.net> |
Change email address for Steve Glendinning I no longer have a mailbox at smsc.com, and I've had two reports that that email address now bounces from people trying to contact me. This patch updates all references to that invalid address to one that I can be contacted on more permanently. This patch also updates the maintainer status to reflect the fact I'm no longer directly paid to maintain these drivers. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
#
2355375e |
|
02-Jun-2012 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (emc2103) Fix use of an uninitilized variable in error case Fix: emc2103.c: In function set_pwm_enable: emc2103.c:463:12: warning: conf_reg may be used uninitialized in this function by checking the return value from read_u8_from_i2c(). This fixes a real problem, as conf_reg is really uninitialized if read_u8_from_i2c returns an error. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
|
#
bf0f3a04 |
|
19-Jan-2012 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (emc2103) Fix multi-line comments Cc: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
#
f0967eea |
|
20-Jan-2012 |
Axel Lin <axel.lin@gmail.com> |
hwmon: convert drivers/hwmon/* to use module_i2c_driver() This patch converts the drivers in drivers/hwmon/* to use the module_i2c_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Corentin Labbe <corentin.labbe@geomatys.fr> Cc: Dirk Eibach <eibach@gdsys.de> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Guillaume Ligneul <guillaume.ligneul@gmail.com> Cc: David George <david.george@ska.ac.za> Cc: "Hans J. Koch" <hjk@hansjkoch.de> Cc: Marc Hulsman <m.hulsman@tudelft.nl> Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
|
#
69116f27 |
|
12-Jan-2012 |
Rusty Russell <rusty@rustcorp.com.au> |
module_param: avoid bool abuse, add bint for special cases. For historical reasons, we allow module_param(bool) to take an int (or an unsigned int). That's going away. A few drivers really want an int: they set it to -1 and a parameter will set it to 0 or 1. This sucks: reading them from sysfs will give 'Y' for both -1 and 1, but if we change it to an int, then the users might be broken (if they did "param" instead of "param=1"). Use a new 'bint' parser for them. (ntfs has a different problem: it needs an int for debug_msgs because it's also exposed via sysctl.) Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Cc: Christoph Raisch <raisch@de.ibm.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: linux390@de.ibm.com Cc: Anton Altaparmakov <anton@tuxera.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: lm-sensors@lm-sensors.org Cc: linux-rdma@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linux-ntfs-dev@lists.sourceforge.net Cc: alsa-devel@alsa-project.org Acked-by: Takashi Iwai <tiwai@suse.de> (For the sound part) Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> (For the hwmon driver) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
#
179c4fdb |
|
04-Jan-2012 |
Frans Meulenbroeks <fransmeulenbroeks@gmail.com> |
hwmon: replaced strict_str* with kstr* replaced strict_strtol with kstrtol and replaced strict_strtuol with kstrtuol This satisfies checkpatch -f Compile tested only: no warnings or errors given Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
|
#
9df7305b |
|
14-Aug-2010 |
Steve Glendinning <steve.glendinning@smsc.com> |
hwmon: Add driver for SMSC EMC2103 temperature monitor and fan controller SMSC's EMC2103 family of temperature/fan controllers have 1 onboard and up to 3 external temperature sensors, and allow closed-loop control of one fan. This patch adds support for them. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
|