hwmon: (asus-ec-sensors) add ROG Crosshair X670E Gene.

Only the temp sensors that I can verify are present.

T_Sensor is the temperature reading of a 10kΩ β=3435K NTC thermistor
optionally connected to the T_SENSOR header.

The other sensors are as found on the X670E Hero.

Signed-off-by: Ellie Hermaszewska <kernel@monoid.al>
Link: https://lore.kernel.org/r/20231026104332.906357-1-kernel@monoid.al
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensosrs) fix mutex path for X670E Hero

A user reported that they observe race condition warning [1] and after
looking once again into the DSDT source it was found that wrong mutex
was used.

[1] https://github.com/zeule/asus-ec-sensors/issues/43

Fixes: 790dec13c012 ("hwmon: (asus-ec-sensors) add ROG Crosshair X670E Hero.")
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20230821115418.25733-2-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) add ROG Crosshair X670E Hero.

Only the temp sensors that I can verify are present. HWINFO in
Windows shows other accumulated data and statistics (time since
installed, total power used, etc) that I have not attempted to find.

Signed-off-by: Michael Carns <mike@carns.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20230426200345.65765-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) add ROG STRIX Z390-F GAMING

The definition comes from a LHM PR [1], and the mutex path from
the ACPI dump, kindly provided by the PR author [2]

[1] https://github.com/LibreHardwareMonitor/LibreHardwareMonitor/pull/1031
[2] https://github.com/zeule/asus-ec-sensors/issues/36

Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20230405224339.358675-3-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) add ProArt B550-Creator

Add support for the ASUS ProArt B550-Creator board, was tested
with the hardware [1].

[1] https://github.com/zeule/asus-ec-sensors/issues/35

Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Signed-off-by: fireflame90051 <cacoukoulis@gmail.com>
Link: https://lore.kernel.org/r/20230405224339.358675-2-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) add zenith ii extreme alpha

The ROG ZENITH II EXTREME ALPHA provides the same set of sensors as the
no-ALPHA version. Tested with the hardware [1].

[1] https://github.com/zeule/asus-ec-sensors/issues/31

Signed-off-by: Eric Nguyen <linux@drogman.ch>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20230128102135.5199-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) add missing mutex path

Add missing mutex path for ProArt X570-CREATOR WIFI.

Fixes: de8fbac5e59e (hwmon: (asus-ec-sensors) implement locking via the ACPI global lock)
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20230121111728.168514-2-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) Add checks for devm_kcalloc

As the devm_kcalloc may return NULL, the return value needs to be checked
to avoid NULL poineter dereference.

Fixes: d0ddfd241e57 ("hwmon: (asus-ec-sensors) add driver for ASUS EC")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221125014329.121560-1-yuancan@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) autoload module via DMI data

Replace autoloading data based on the ACPI EC device with the DMI
records for motherboards models. The ACPI method created a bug that when
this driver returns error from the probe function because of the
unsupported motherboard model, the ACPI subsystem concludes
that the EC device does not work properly.

Fixes: 5cd29012028d ("hwmon: (asus-ec-sensors) introduce ec_board_info struct for board data")
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=216412
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=2121844
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220909155654.123398-2-eugene.shalygin@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) add definitions for ROG ZENITH II EXTREME

Add definitions for ROG ZENITH II EXTREME and some unknown yet
temperature sensors in the second EC bank. Details are available at
[1, 2].

[1] https://github.com/zeule/asus-ec-sensors/pull/26
[2] https://github.com/zeule/asus-ec-sensors/issues/16

Signed-off-by: Urs Schroffenegger <nabajour@lampshade.ch>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220710202639.1812058-2-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) add missing sensors for X570-I GAMING

VRM and chipset temperature for ROG STRIX X570-I GAMING were missing
according to a user contribution to the LHM project [1].

[1] https://github.com/LibreHardwareMonitor/LibreHardwareMonitor/pull/767

Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220710085539.1682869-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) add support for Maximus XI Hero

Add definitions for ROG MAXIMUS XI HERO and ROG MAXIMUS XI HERO (WI-FI)
boards.

Signed-off-by: Michael Carns <mike@carns.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220627225437.87462-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) add support for Strix Z690-a D4

adds T_Sensor and VRM Temp sensors for the Asus Strix z690-a D4 motherboard

Signed-off-by: Shady Nawara <shady.nawara@outlook.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220603122758.1561064-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) add missing comma in board name list.

This fixes a regression where coma lead to concatenating board names
and broke module loading for C8H.

Fixes: 5b4285c57b6f ("hwmon: (asus-ec-sensors) fix Formula VIII definition")

Signed-off-by: Michael Carns <mike@carns.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220615122544.140340-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) fix Formula VIII definition

The ROG CROSSHAIR VIII FORMULA board has the same sensors as the
CROSSHAIR VIII HERO [1] thus let's join their definitions which adds
missing sensors for Formula.

[1] https://github.com/LibreHardwareMonitor/LibreHardwareMonitor/pull/740

Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220517080508.1910953-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) add ROG STRIX X570-E GAMING WIFI II

Adds support for the ROG STRIX X570-E GAMING WIFI II board and
simplifies formatting for the list of supported models.

Signed-off-by: Debabrata Banerjee <dbavatar@gmail.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220505073351.123753-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) add PRIME X470-PRO board

This board is supposed to be handled by the asus-wmi-sensors driver,
but due to a buggy WMI implementation the driver and the official ASUS
software make the BIOS hang together with fan controls [1, 2].

This driver complements values provided by the SIO chip and does not
freeze the BIOS, as tested by a user [2].

[1] https://github.com/electrified/asus-wmi-sensors/blob/master/README.md
[2] https://github.com/zeule/asus-ec-sensors/issues/12

Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220427143001.1443605-5-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) add support for board families

DSDT code for AMD 400-series chipset shows that sensor addresses differ
for this generation from those for the AMD 500-series boards.

Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220427143001.1443605-4-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) implement locking via the ACPI global lock

For some board models ASUS uses the global ACPI lock to guard access to
the hardware, so do we.

Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220427143001.1443605-3-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) introduce ec_board_info struct for board data

We need to keep some more information about the current board than just
the sensors set, and with more boards to add the dmi id array grows
quickly. Our probe code is always the same so let's switch to a custom
test code and a custom board info array. That allows us to omit board
vendor string (ASUS uses two strings that differ in case) in the board
info and use case-insensitive comparison, and also do not duplicate
sensor definitions for such board variants as " (WI-FI)" when sensors
are identical to the base variant.

Also saves a quarter of the module size by replacing big dmi_system_id
structs with smaller ones.

Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220427143001.1443605-2-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) add ProArt X570 Creator WIFI board

Basing on information and testing provided by users [1] add support for
another board, ASUS ProArt X570 Creator WiFi.

[1] https://github.com/zeule/asus-ec-sensors/issues/17

Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220422111737.1352610-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) Add T_Sensor for ASUS WS X570-ACE

WS X570-ACE has a T_Sensor header on board according to manual[1].

I'm using a 10kΩ B=3435K thermsistor attached to the header of WS X570-ACE.
EC byte at 0x3d matches readings from BIOS sensor page and environment temperature.

[1]https://www.asus.com/Motherboards-Components/Motherboards/All-series/Pro-WS-X570-ACE/HelpDesk_Manual/

Signed-off-by: Wei Shuyu <wsy@dogben.com>
Link: https://lore.kernel.org/r/E1nY43Q-000rAm-9a@dogben.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) do not print from .probe()

Remove the call to dev_info() from the board detection function, which
is called from probe(), not only to be in line with hwmon driver rules, but
also because the message duplicates the error code returned from probe()
for that case (ENODEV).

Changes in:
- v2: add missing newline (style).

Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220217194318.2960472-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) merge setup functions

Merge configure_sensor_setup() into probe().

Changes:
- v2: add local struct device *dev = &pdev->dev;
- v3: initialize dev at declaration
- v4: fix checkpatch warning
- v5: fix formatting
- v6: code style fixes
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) deduce sensor signedness from its type

Reading DSDT code for ASUS X470-based boards (the ones served by the
asus_wmi_Sensors driver), where ASUS put hardware monitoring functions
into the WMI code, reveals that fan and current sensors data is
unsigned. For the current sensor that was confirmed by a user who showed
high enough current value for overflow.

Thus let's assume that the signedness of the sensors is determined by its
type and that only temperature ones provide signed numbers.

Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220211164855.265698-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) add CPU core voltage

A user discovered [1] the CPU Core voltage sensor, which spans 2
registers and provides output in mV. Althroug the discovery was made
with a X470 chipset, the sensor is present in X570 (tested with C8H).
For now simply add it to each board with the CPU current sensor present.

[1] https://github.com/zeule/asus-ec-sensors/issues/12

Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Denis Pauk <pauk.denis@gmail.com>
Link: https://lore.kernel.org/r/20220208094244.1106312-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) read sensors as signed ints

Temperature sensor readings are signed, which is hinted by their blank
value (oxd8, 216 as unsigned and -40 as signed). T_Sensor, Crosshair
VIII Hero, and a freezer were used to confirm that.

Here we read fan sensors as signed too, because with their typical
values and 2-byte width, I can't tell a difference between signed and
unsigned, as I don't have a high speed chipset fan.

Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220204163045.576903-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) fix a typo in asus_ec_probe()

There is no such struct as "asus_ec_sensors", it was supposed to be
"ec_sensors_data". This typo does not affect either build or runtime.

Fixes: c4b1687d6897 ("hwmon: (asus-ec-sensors) add driver for ASUS EC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220205092015.GA612@kili
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) Add Crosshair VIII Hero WiFi

The Wi-Fi variant of Crosshair VIII Hero provides the same sensors,
which was tested by a Libre Hardware Monitor user [1].

[1] https://github.com/LibreHardwareMonitor/LibreHardwareMonitor/pull/453#issuecomment-1028398487

Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220203203052.441712-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (asus-ec-sensors) add driver for ASUS EC

This driver provides the same data as the asus_wmi_ec_sensors driver
(and gets it from the same source) but does not use WMI, polling
the ACPI EC directly.

That provides two enhancements: sensor reading became quicker (on some
systems or kernel configuration it took almost a full second to read
all the sensors, that transfers less than 15 bytes of data), the driver
became more flexible. The driver now relies on ACPI mutex to lock access
to the EC in the same way as the WMI code does.

Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220124015658.687309-2-eugene.shalygin@gmail.com
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Denis Pauk <pauk.denis@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>