drm/xe: Group normal kunit tests in a single module

Creating one module for each compilation unit to be tested seems
excessive as the number of tests increase. Group them all in a single
kunit test module called xe_test.ko.

The tests requiring the physical device, aka "live" tests, are still
kept in separate modules since they are normally triggered via igt,
and not via kunit.py. After igt is converted, those can be merged in
a single module as well.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122203147.988021-2-lucas.demarchi@intel.com

drm/xe: Add mocs kunit

This kunit verifies the hardware values of mocs and
l3cc registers with the KMD programmed values.

v14: Fix CHECK.

v13: Remove ret after forcewake.

v11: Add KUNIT_ASSERT_EQ_MSG for Forcewake.

v9/v10: Add Forcewake Fail.

v8: Remove xe_bo.h and xe_pm.h
Remove mocs and l3cc from live_mocs.
Pull debug and err msg for mocs/l3cc out of if else block.
Add HAS_LNCF_MOCS.

v7: correct checkpath

v6: Change ssize_t type.
Change forcewake domain to XE_FW_GT.
Update change of MOCS registers are multicast on Xe_HP and beyond
patch.

v5: Release forcewake.
Remove single statement braces.
Fix debug statements.

v4: Drop stratch and vaddr.
Fix debug statements.
Fix indentation.

v3: Fix checkpath.

v2: Fix checkpath.

Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mathew D Roper <matthew.d.roper@intel.com>
Reviewed-by: Mathew D Roper <matthew.d.roper@intel.com>
Signed-off-by: Ruthuvikas Ravikumar <ruthuvikas.ravikumar@intel.com>
Link: https://lore.kernel.org/r/20231116215152.2248859-1-ruthuvikas.ravikumar@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Add KUnit test for xe_pci.c IP engine lists

Add a simple KUnit test to ensure that the hardware engine lists for
GMD_ID IP definitions are sensible (i.e., no graphics engines defined
for the media IP and vice versa).

Only the IP descriptors for GMD_ID platforms are checked for now.
Presumably the engine lists on older pre-GMD_ID platforms shouldn't be
changing. We can extend the KUnit testing in the future if we decide we
want to check those as well.

v2:
- Add missing 'const' in xe_call_for_each_media_ip to avoid compiler
warning.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230406235621.1914492-9-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Add test for GT workarounds and tunings

In order to avoid mistakes when populating the workarounds, it's good to
be able to test if the entries added are all compatible for a certain
platform. The platform itself is not needed as long as we create fake
devices with enough configuration for the RTP helpers to process the
tables. Common mistakes that can be avoided:

- Entries clashing the bitfields being updated
- Register type being mixed (MCR vs regular / masked vs regular)
- Unexpected errors while adding the reg_sr entry

To test, inject a duplicate entry in gt_was, but with platform == tigerlake
rather than the currenct graphics version check:

{ XE_RTP_NAME("14011059788"),
XE_RTP_RULES(PLATFORM(TIGERLAKE)),
XE_RTP_ACTIONS(SET(GEN10_DFR_RATIO_EN_AND_CHICKEN, DFR_DISABLE))
},

This produces the following result:

$ ./tools/testing/kunit/kunit.py run \
--kunitconfig drivers/gpu/drm/xe/.kunitconfig xe_wa

[14:18:02] Starting KUnit Kernel (1/1)...
[14:18:02] ============================================================
[14:18:02] ==================== xe_wa (1 subtest) =====================
[14:18:02] ======================== xe_wa_gt =========================
[14:18:02] [drm:xe_reg_sr_add] *ERROR* Discarding save-restore reg 9550 (clear: 00000200, set: 00000200, masked: no): ret=-22
[14:18:02] # xe_wa_gt: ASSERTION FAILED at drivers/gpu/drm/xe/tests/xe_wa_test.c:116
[14:18:02] Expected gt->reg_sr.errors == 0, but
[14:18:02] gt->reg_sr.errors == 1 (0x1)
[14:18:02] [FAILED] TIGERLAKE (B0)
[14:18:02] [PASSED] DG1 (A0)
[14:18:02] [PASSED] DG1 (B0)
...

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20230401085151.1786204-8-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Add basic unit tests for rtp

Add some basic unit tests for rtp. This is intended to prove the
functionality of the rtp itself, like coalescing entries, rejecting
non-disjoint values, etc.

Contrary to the other tests in xe, this is a unit test to test the
sw-side only, so it can be executed on any machine - it doesn't interact
with the real hardware. Running it produces the following output:

$ ./tools/testing/kunit/kunit.py run --raw_output-kunit \
--kunitconfig drivers/gpu/drm/xe/.kunitconfig xe_rtp
...
[01:26:27] Starting KUnit Kernel (1/1)...
KTAP version 1
1..1
KTAP version 1
# Subtest: xe_rtp
1..1
KTAP version 1
# Subtest: xe_rtp_process_tests
ok 1 coalesce-same-reg
ok 2 no-match-no-add
ok 3 no-match-no-add-multiple-rules
ok 4 two-regs-two-entries
ok 5 clr-one-set-other
ok 6 set-field
[drm:xe_reg_sr_add] *ERROR* Discarding save-restore reg 0001 (clear: 00000001, set: 00000001, masked: no): ret=-22
ok 7 conflict-duplicate
[drm:xe_reg_sr_add] *ERROR* Discarding save-restore reg 0001 (clear: 00000003, set: 00000000, masked: no): ret=-22
ok 8 conflict-not-disjoint
[drm:xe_reg_sr_add] *ERROR* Discarding save-restore reg 0001 (clear: 00000002, set: 00000002, masked: no): ret=-22
[drm:xe_reg_sr_add] *ERROR* Discarding save-restore reg 0001 (clear: 00000001, set: 00000001, masked: yes): ret=-22
ok 9 conflict-reg-type
# xe_rtp_process_tests: pass:9 fail:0 skip:0 total:9
ok 1 xe_rtp_process_tests
# Totals: pass:9 fail:0 skip:0 total:9
ok 1 xe_rtp
...

Note that the ERRORs in the kernel log are expected since it's testing
incompatible entries.

v2:
- Use parameterized table for tests (Michał Winiarski)
- Move everything to the xe_rtp_test.ko and only add a few exports to the
right namespace
- Add more tests to cover FIELD_SET, CLR, partially true rules, etc

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maarten Lankhorst<maarten.lankhorst@linux.intel.com> # v1
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20230401085151.1786204-7-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/xe: Introduce a new DRM driver for Intel GPUs

Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms starting with Tiger Lake (first Intel Xe Architecture).

The code is at a stage where it is already functional and has experimental
support for multiple platforms starting from Tiger Lake, with initial
support implemented in Mesa (for Iris and Anv, our OpenGL and Vulkan
drivers), as well as in NEO (for OpenCL and Level0).

The new Xe driver leverages a lot from i915.

As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there. But it is not added
in this patch.

This initial work is a collaboration of many people and unfortunately
the big squashed patch won't fully honor the proper credits. But let's
get some git quick stats so we can at least try to preserve some of the
credits:

Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Co-developed-by: Francois Dugast <francois.dugast@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Philippe Lecluse <philippe.lecluse@intel.com>
Co-developed-by: Nirmoy Das <nirmoy.das@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: José Roberto de Souza <jose.souza@intel.com>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Co-developed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Co-developed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>