drm/vc4: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert the vc4 drm drivers from always returning zero in the
remove callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-53-u.kleine-koenig@pengutronix.de

drm/vc4: hvs: Ignore atomic_flush if we're disabled

atomic_flush will be called for each CRTC even if they aren't enabled.

The whole code we have there will thus run without a properly affected
channel, which can then result in all sorts of weird behaviour.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-8-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hvs: Support zpos on all planes

Adds the zpos property to all planes, and creates the dlist
by placing the fragments in the correct order based on zpos.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-5-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hvs: Correct interrupt masking bit assignment for HVS5

HVS5 has moved the interrupt enable bits around within the
DISPCTRL register, therefore the configuration has to be updated
to account for this.

Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-4-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hvs: SCALER_DISPBKGND_AUTOHS is only valid on HVS4

The bit used for SCALER_DISPBKGND_AUTOHS in SCALER_DISPBKGNDX
has been repurposed on HVS5 to configure whether a display can
win back-to-back arbitration wins for the COB.

This is not desirable, therefore only select this bit on HVS4,
and explicitly clear it on HVS5.

Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-3-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hvs: Set AXI panic modes

The HVS can change AXI request mode based on how full the COB
FIFOs are.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.

With HVS channel 2 now being used for live video, change the
panic mode for all channels to be explicitly set by the driver,
and the same for all channels.

Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-2-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hvs: Configure the HVS COB allocations

The HVS Composite Output Buffer (COB) is the memory used to
generate the output pixel data.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.

In testing triple screen support it has been noted that only
1 line was being assigned to HVS channel 2. Whilst that is fine
for the transposer (TXP), and indeed needed as only some pixels
have an alpha channel, it is insufficient to run a live display.

Split the COB more evenly between the 3 HVS channels.

Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-1-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: use new debugfs device-centered functions

Currently, vc4 has its own debugfs infrastructure that adds the debugfs
files on drm_dev_register(). With the introduction of the new debugfs,
functions, replace the vc4 debugfs structure with the DRM debugfs
device-centered function, drm_debugfs_add_file().

Moreover, remove the explicit error handling of debugfs related functions,
considering that the only failure mode is -ENOMEM and also that error
handling is not recommended for debugfs functions, as pointed out in [1].

[1] https://lore.kernel.org/all/YWAmZdRwnAt6wh9B@kroah.com/

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-5-mcanal@igalia.com

drm/vc4: hvs: Provide a function to initialize the HVS structure

We'll need to initialize the HVS structure without a backing device to
create a mock we'll use for testing.

Split the structure initialization part into a separate function.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-16-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hdmi: Add more checks for 4k resolutions

At least the 4096x2160@60Hz mode requires some overclocking that isn't
available by default, even if hdmi_enable_4kp60 is enabled.

Let's add some logic to detect whether we can satisfy the core clock
requirements for that mode, and prevent it from being used otherwise.

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220815-rpi-fix-4k-60-v5-6-fe9e7ac8b111@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hdmi: Rework hdmi_enable_4kp60 detection code

In order to support higher HDMI frequencies, users have to set the
hdmi_enable_4kp60 parameter in their config.txt file.

This will have the side-effect of raising the maximum of the core clock,
tied to the HVS, and managed by the HVS driver.

However, we are querying this in the HDMI driver by poking into the HVS
structure to get our struct clk handle.

Let's make this part of the HVS bind implementation to have all the core
clock related setup in the same place.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220815-rpi-fix-4k-60-v5-5-fe9e7ac8b111@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hvs: protect drm_print_regset32()

In vc4_hvs_dump_state() potentially freed resources are protected from
being accessed with drm_dev_enter()/drm_dev_exit().

Also include drm_print_regset32() in the protected section, since
drm_print_regset32() does access memory that is typically mapped via
devm_* calls.

Fixes: 969cfae1f01d ("drm/vc4: hvs: Protect device resources after removal")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220824161327.330627-5-dakr@redhat.com

drm/vc4: debugfs: Simplify debugfs registration

The vc4 has a custom API to allow components to register a debugfs file
before the DRM driver has been registered and the debugfs_init hook has
been called.

However, the .late_register hook allows to have the debugfs file creation
deferred after that time already.

Let's remove our custom code to only register later our debugfs entries as
part of either debugfs_init or after it.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-65-maxime@cerno.tech

drm/vc4: hvs: Remove planes currently allocated before taking down

When the HVS driver is unbound, a lot of memory allocations in the LBM and
DLIST RAM are still assigned to planes that are still allocated.

Thus, we hit a warning when calling drm_mm_takedown() since the memory pool
is not completely free of allocations.

Let's free all the currently live entries before calling drm_mm_takedown().

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-17-maxime@cerno.tech

drm/vc4: hvs: Protect device resources after removal

Whenever the device and driver are unbound, the main device and all the
subdevices will be removed by calling their unbind() method.

However, the DRM device itself will only be freed when the last user will
have closed it.

It means that there is a time window where the device and its resources
aren't there anymore, but the userspace can still call into our driver.

Fortunately, the DRM framework provides the drm_dev_enter() and
drm_dev_exit() functions to make sure our underlying device is still there
for the section protected by those calls. Let's add them to the HVS driver.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-16-maxime@cerno.tech

drm/vc4: hvs: Add debugfs node that dumps the current display lists

This allows easy analysis of display lists when debugging.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-8-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: Consolidate Hardware Revision Check

A new generation of controller has been introduced with the
BCM2711/RaspberryPi4. This generation needs a bunch of quirks, and over
time we've piled on a number of checks in most parts of the drivers.

All these checks are performed several times, and are not always
consistent. Let's create a single, global, variable to hold it and use
it everywhere.

Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-3-maxime@cerno.tech

drm/vc4: hvs: Reset muxes at probe time

By default, the HVS driver will force the HVS output 3 to be muxed to
the HVS channel 2. However, the Transposer can only be assigned to the
HVS channel 2, so whenever we try to use the writeback connector, we'll
mux its associated output (Output 2) to the channel 2.

This leads to both the output 2 and 3 feeding from the same channel,
which is explicitly discouraged in the documentation.

In order to avoid this, let's reset all the output muxes to their reset
value.

Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220328153659.2382206-2-maxime@cerno.tech

drm/vc4: hvs: Use pointer to HVS in HVS_READ and HVS_WRITE macros

Those macros are really about the HVS itself, and thus its associated
structure vc4_hvs, rather than the entire (virtual) vc4 device.

Let's change those macros to use the hvs pointer directly, and change
the calling sites accordingly.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-8-maxime@cerno.tech

drm/vc4: hvs: Move the dlist setup to its own function

The vc4_hvs_update_dlist function mostly deals with setting up the
vblank events and setting up the dlist entry pointer to our current
active one.

We'll want to do the former separately from the vblank handling in later
patches, so let's move it to a function of its own.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-6-maxime@cerno.tech

drm/vc4: hvs: Remove dlist setup duplication

Setting the DISPLISTx register needs to occur in every case, and we
don't need to protect the register using the event_lock, so we can just
move it after the if branches and simplify a bit the function.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-5-maxime@cerno.tech

drm/vc4: hvs: Store channel in variable

The assigned_channel field of our vc4_crtc_state structure is accessed
multiple times in vc4_hvs_atomic_flush, so let's move it to a variable
that can be used in all those places.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-4-maxime@cerno.tech

drm/vc4: hvs: Fix frame count register readout

In order to get the field currently being output, the driver has been
using the display FIFO frame count in the HVS, reading a 6-bit field at
the offset 12 in the DISPSTATx register.

While that field is indeed at that location for the FIFO 1 and 2, the
one for the FIFO0 is actually in the DISPSTAT1 register, at the offset
18.

Fixes: e538092cb15c ("drm/vc4: Enable precise vblank timestamping for interlaced modes.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-3-maxime@cerno.tech

drm/vc4: crtc: Copy assigned channel to the CRTC

Accessing the crtc->state pointer from outside the modesetting context
is not allowed. We thus need to copy whatever we need from the KMS state
to our structure in order to access it.

In VC4, a number of users of that pointers have crept in over the years,
and the previous commits removed them all but the HVS channel a CRTC has
been assigned.

Let's move this channel in struct vc4_crtc at atomic_begin() time, drop
it from our private state structure, and remove our use of crtc->state
from our vblank handler entirely.

Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/
Link: https://lore.kernel.org/r/20211025141113.702757-4-maxime@cerno.tech
Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: Fix non-blocking commit getting stuck forever

In some situation, we can end up being stuck on a non-blocking that went
through properly.

The situation that seems to trigger it reliably is to first start a
non-blocking commit, and then right after, and before we had any vblank
interrupt), start a blocking commit.

This will lead to the first commit workqueue to be scheduled, setup the
display, while the second commit is waiting for the first one to be
completed.

The vblank interrupt will then be raised, vc4_crtc_handle_vblank() will
run and will compare the active dlist in the HVS channel to the one
associated with the crtc->state.

However, at that point, the second commit is waiting using
drm_atomic_helper_wait_for_dependencies that occurs after
drm_atomic_helper_swap_state has been called, so crtc->state points to
the second commit state. vc4_crtc_handle_vblank() will compare the two
dlist addresses and since they don't match will ignore the interrupt.

The vblank event will never be reported, and the first and second commit
will wait for the first commit completion until they timeout.

The underlying reason is that it was never safe to do so. Indeed,
accessing the ->state pointer access synchronization is based on
ownership guarantees that can only occur within the functions and hooks
defined as part of the KMS framework, and obviously the irq handler
isn't one of them. The rework to move to generic helpers only uncovered
the underlying issue.

However, since the code path between
drm_atomic_helper_wait_for_dependencies() and
drm_atomic_helper_wait_for_vblanks() is serialised and we can't get two
commits in that path at the same time, we can work around this issue by
setting a variable associated to struct drm_crtc to the dlist we expect,
and then using it from the vc4_crtc_handle_vblank() function.

Since that state is shared with the modesetting path, we also need to
introduce a spinlock to protect the code shared between the interrupt
handler and the modesetting path, protecting only our new variable for
now.

Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/
Link: https://lore.kernel.org/r/20211025141113.702757-3-maxime@cerno.tech
Fixes: 56d1fe0979dc ("drm/vc4: Make pageflip completion handling more robust.")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: crtc: Drop feed_txp from state

Accessing the crtc->state pointer from outside the modesetting context
is not allowed. We thus need to copy whatever we need from the KMS state
to our structure in order to access it.

In VC4, a number of users of that pointers have crept in over the years,
the first one being whether or not the downstream controller of the
pixelvalve is our writeback controller.

Fortunately for us, Since commit 39fcb2808376 ("drm/vc4: txp: Turn the
TXP into a CRTC of its own") this is no longer something that can change
from one commit to the other and is hardcoded.

Let's set this flag in struct vc4_crtc if we happen to be the TXP, and
drop the flag from our private state structure.

Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/
Link: https://lore.kernel.org/r/20211025141113.702757-2-maxime@cerno.tech
Fixes: 008095e065a8 ("drm/vc4: Add support for the transposer block")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hvs: Align the HVS atomic hooks to the new API

Since the CRTC setup in vc4 is split between the PixelValves/TXP and the
HVS, only the PV/TXP atomic hooks were updated in the previous commits, but
it makes sense to update the HVS ones too.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-2-maxime@cerno.tech

drm/vc4: Correct lbm size and calculation

LBM base address is measured in units of pixels per cycle.
That is 4 for 2711 (hvs5) and 2 for 2708.

We are wasting 75% of lbm by indexing without the scaling.
But we were also using too high a size for the lbm resulting
in partial corruption (right hand side) of vertically
scaled images, usually at 4K or lower resolutions with more layers.

The physical RAM of LBM on 2711 is 8 * 1920 * 16 * 12-bit
(pixels are stored 12-bits per component regardless of format).

The LBM address indexes work in units of pixels per clock,
so for 4 pixels per clock that means we have 32 * 1920 = 60K

Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Tested-By: Lucas Nussbaum <lucas@debian.org>
Tested-By: Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121105759.1262699-1-maxime@cerno.tech

drm/atomic: Pass the full state to CRTC atomic begin and flush

The current atomic helpers have either their object state being passed as
an argument or the full atomic state.

The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.

Let's start convert all the remaining helpers to provide a consistent
interface, starting with the CRTC's atomic_begin and atomic_flush.

The conversion was done using the coccinelle script below, built tested on
all the drivers and actually tested on vc4.

virtual report

@@
struct drm_crtc_helper_funcs *FUNCS;
identifier old_crtc_state, old_state;
identifier crtc;
identifier f;
@@

f(struct drm_crtc_state *old_crtc_state)
{
...
struct drm_atomic_state *old_state = old_crtc_state->state;
<...
- FUNCS->atomic_begin(crtc, old_crtc_state);
+ FUNCS->atomic_begin(crtc, old_state);
...>
}

@@
struct drm_crtc_helper_funcs *FUNCS;
identifier old_crtc_state, old_state;
identifier crtc;
identifier f;
@@

f(struct drm_crtc_state *old_crtc_state)
{
...
struct drm_atomic_state *old_state = old_crtc_state->state;
<...
- FUNCS->atomic_flush(crtc, old_crtc_state);
+ FUNCS->atomic_flush(crtc, old_state);
...>
}

@@
struct drm_crtc_helper_funcs *FUNCS;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
identifier dev, state;
identifier f;
@@

f(struct drm_device *dev, struct drm_atomic_state *state, ...)
{
<...
- FUNCS->atomic_begin(crtc, crtc_state);
+ FUNCS->atomic_begin(crtc, state);
...>
}

@@
struct drm_crtc_helper_funcs *FUNCS;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
identifier dev, state;
identifier f;
@@

f(struct drm_device *dev, struct drm_atomic_state *state, ...)
{
<...
- FUNCS->atomic_flush(crtc, crtc_state);
+ FUNCS->atomic_flush(crtc, state);
...>
}

@@
identifier crtc, old_state;
@@

struct drm_crtc_helper_funcs {
...
- void (*atomic_begin)(struct drm_crtc *crtc, struct drm_crtc_state *old_state);
+ void (*atomic_begin)(struct drm_crtc *crtc, struct drm_atomic_state *state);
...
- void (*atomic_flush)(struct drm_crtc *crtc, struct drm_crtc_state *old_state);
+ void (*atomic_flush)(struct drm_crtc *crtc, struct drm_atomic_state *state);
...
}

@ crtc_atomic_func @
identifier helpers;
identifier func;
@@

(
static struct drm_crtc_helper_funcs helpers = {
...,
.atomic_begin = func,
...,
};
|
static struct drm_crtc_helper_funcs helpers = {
...,
.atomic_flush = func,
...,
};
)

@ ignores_old_state @
identifier crtc_atomic_func.func;
identifier crtc, old_state;
@@

void func(struct drm_crtc *crtc,
struct drm_crtc_state *old_state)
{
... when != old_state
}

@ adds_old_state depends on crtc_atomic_func && !ignores_old_state @
identifier crtc_atomic_func.func;
identifier crtc, old_state;
@@

void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state)
{
+ struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc);
...
}

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
expression E;
type T;
@@

void func(...)
{
...
- T state = E;
+ T crtc_state = E;
<+...
- state
+ crtc_state
...+>

}

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
type T;
@@

void func(...)
{
...
- T state;
+ T crtc_state;
<+...
- state
+ crtc_state
...+>

}

@@
identifier old_state;
identifier crtc;
@@

void vc4_hvs_atomic_flush(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
)
{
+ struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc);
...
}

@@
identifier old_state;
identifier crtc;
@@

void vc4_hvs_atomic_flush(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
);

@@
identifier old_state;
identifier crtc;
@@

void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
)
{
...
}

@@
identifier old_state;
identifier crtc;
@@

void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
);

@@
identifier old_state;
identifier crtc;
@@

void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
)
{
...
}

@@
identifier old_state;
identifier crtc;
@@

void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
);

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
identifier old_state;
identifier crtc;
@@

void func(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
)
{ ... }

@ include depends on adds_old_state @
@@

#include <drm/drm_atomic.h>

@ no_include depends on !include && adds_old_state @
@@

+ #include <drm/drm_atomic.h>
#include <drm/...>

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-2-maxime@cerno.tech

drm/vc4: Use the helper to retrieve vc4_dev when needed

We have a helper to retrieve the vc4_dev structure from the drm_device one
when needed, so let's use it consistently.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029190104.2181730-4-maxime@cerno.tech

drm/vc4: hvs: Introduce a function to get the assigned FIFO

At boot time, if we detect that a pixelvalve has been enabled, we need to
be able to retrieve the HVS channel it has been assigned to so that we can
disable that channel too. Let's create that function that returns the FIFO
or an error from a given output.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/178192d90874559b8386139f2226e773347729fc.1599120059.git-series.maxime@cerno.tech

drm/vc4: hvs: Make the stop_channel function public

During the transition from the firmware to the KMS driver, we need to pay
particular attention to how we deal with the pixelvalves that have already
been enabled, otherwise either timeouts or stuck pixels can occur. We'll
thus need to call the function to stop an HVS channel at boot.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/a9d5f0891c3bc1deb6b16d56ca6994ed912ec7c7.1599120059.git-series.maxime@cerno.tech

drm/vc4: hvs: Make sure our channel is reset

In order to clear our intermediate FIFOs that might end up with a stale
pixel, let's make sure our FIFO channel is reset every time our channel is
setup.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b34c562b36177c758dd2e9d84bceb07689bfbe05.1599120059.git-series.maxime@cerno.tech

drm/vc4: crtc: Move the HVS gamma LUT setup to our init function

Since most of the HVS channel is setup in the init function, let's move the
gamma setup there too. As this makes the HVS mode_set function empty, let's
remove it in the process.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d439da8f1592a450a6ad35ab1f9e77def17c7965.1599120059.git-series.maxime@cerno.tech

drm/vc4: crtc: Move HVS init and close to a function

In order to make further refactoring easier, let's move the HVS channel
setup / teardown to their own function.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fb1b5299d1636ddce8340b51a80d51641839f83b.1599120059.git-series.maxime@cerno.tech

drm/vc4: crtc: Disable color management for HVS5

The HVS5 uses different color matrices. Disable color management support
for now.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/e528e2edf0a1be3930196d437e548114dd9fcf59.1599120059.git-series.maxime@cerno.tech

drm/vc4: crtc: Assign output to channel automatically

The HVS found in the BCM2711 has 6 outputs and 3 FIFOs, with each output
being connected to a pixelvalve, and some muxing between the FIFOs and
outputs.

Any output cannot feed from any FIFO though, and they all have a bunch of
constraints.

In order to support this, let's store the possible FIFOs each output can be
assigned to in the vc4_crtc_data, and use that information at atomic_check
time to iterate over all the CRTCs enabled and assign them FIFOs.

The channel assigned is then set in the vc4_crtc_state so that the rest of
the driver can use it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f9aba3814ef37156ff36f310118cdd3954dd3dc5.1599120059.git-series.maxime@cerno.tech

drm/vc4: crtc: Rename HVS channel to output

In vc5, the HVS has 6 outputs and 3 FIFOs (or channels), with
pixelvalves each being assigned to a given output, but each output can
then be muxed to feed from multiple FIFOs.

Since vc4 had that entirely static, both were probably equivalent, but
since that changes, let's rename hvs_channel to hvs_output in the
vc4_crtc_data, since a pixelvalve is really connected to an output, and
not to a FIFO.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b7618bb17b1c435c5d6ce50bcde2fe9243281d02.1599120059.git-series.maxime@cerno.tech

drm/vc4: hvs: Boost the core clock during modeset

In order to prevent timeouts and stalls in the pipeline, the core clock
needs to be maxed at 500MHz during a modeset on the BCM2711.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/37ed9e0124c5cce005ddc8dafe821d8b0da036ff.1599120059.git-series.maxime@cerno.tech

drm/vc4: Add support for the BCM2711 HVS5

The HVS found in the BCM2711 is slightly different from the previous
generations.

Most notably, the display list layout changes a bit, the LBM doesn't have
the same size and the formats ordering for some formats is swapped.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1d02fab3b916d639c2dc05608c117bbd8230ebe8.1599120059.git-series.maxime@cerno.tech

drm/vc4: crtc: Move HVS setup code to the HVS driver

The CRTC in vc4 is backed by two devices, the HVS that does the composition
and the PixelValve that does the timing generation.

The writeback is kind of a special case since it doesn't have an associated
pixelvalve but goes straight from the HVS to the TXP. Therefore, it makes
sense to move out the HVS setup code into helpers so that we can also reuse
them from the TXP driver.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/96443394e81429ee38f070cfe231701b07e56d69.1591882579.git-series.maxime@cerno.tech

drm/mm: Use helpers for drm_mm_node booleans

In preparation for rearranging the booleans into a flags field, ensure
all the current users are using the inline helpers and not directly
accessing the members.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003210100.22250-3-chris@chris-wilson.co.uk

drm/vc4: drop use of drmP.h

Drop use of the deprecated header drmP.h.
Fix so vc4_drv.h is now self-contained, and fixed fall-out in remaining
files.

Divided include files in blocks.
Sorted include files within their blocks.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-7-sam@ravnborg.org

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vc4: Use common helpers for debugfs setup by the driver components.

The global list of all debugfs entries for the driver was painful: the
list couldn't see into the components' structs, so each component had
its own debugs show function to find the component, then find the
regset and dump it. The components also had to be careful to check
that they were actually registered in vc4 before dereferencing
themselves, in case they weren't probed on a particular platform.
They routinely failed at that.

Instead, we can have the components add their debugfs callbacks to a
little list in vc4 to be registered at drm_dev_register() time, which
gets vc4_debugfs.c out of the business of knowing the whole list of
components.

Thanks to this change, dsi0 (if it existed) would register its node.

v2: Rebase on hvs_underrun addition.
v3: whitespace fixup

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401183559.3823-1-eric@anholt.net
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>

drm/vc4: Use drm_print_regset32() for our debug register dumping.

This removes a bunch of duplicated boilerplate for the debugfs vs
runtime printk debug dumping.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220210343.28157-2-eric@anholt.net
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>

drm/vc4: Report HVS underrun errors

Add a debugfs entry and helper for reporting HVS underrun errors as
well as helpers for masking and unmasking the underrun interrupts.
Add an IRQ handler and initial IRQ configuration.
Rework related register definitions to take the channel number.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220155124.25022-2-paul.kocialkowski@bootlin.com

drm/vc4: Add CTM registers to debugfs

Now that we set the OLED* registers to do CTM, it's helpful to have them
in the register dump.

Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180420122545.40014-2-stschake@gmail.com

drm/vc4: fix include notation and remove -Iinclude/drm flag

Include <drm/*.h> instead of relative path from include/drm, then
remove the -Iinclude/drm compiler flag.

While we are here, use <...> instead of "..." for include/linux/*.h
and include/sound/*.h headers too.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1495081793-9707-2-git-send-email-yamada.masahiro@socionext.com

drm/vc4: Extend and edit documentation for output from the RST

I had written most of my comments as if I was describing the
individual code files the way I used to for doxygen, while for RST we
want to describe things in a more chapter/section way where there's no
obvious relation to .c files.

Additionally, several of the files had stub descriptions that I've
taken this opportunity to extend.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227201144.10970-4-eric@anholt.net

drm: Improve drm_mm search (and fix topdown allocation) with rbtrees

The drm_mm range manager claimed to support top-down insertion, but it
was neither searching for the top-most hole that could fit the
allocation request nor fitting the request to the hole correctly.

In order to search the range efficiently, we create a secondary index
for the holes using either their size or their address. This index
allows us to find the smallest hole or the hole at the bottom or top of
the range efficiently, whilst keeping the hole stack to rapidly service
evictions.

v2: Search for holes both high and low. Rename flags to mode.
v3: Discover rb_entry_safe() and use it!
v4: Kerneldoc for enum drm_mm_insert_mode.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com> # vmwgfx
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> #etnaviv
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202210438.28702-1-chris@chris-wilson.co.uk

drm/vc4: Set up SCALER_DISPCTRL at boot.

We want the HVS on, obviously, and we also want DSP3 (PV1's source) to
be muxed from HVS channel 2 like we expect in vc4_crtc.c. The
firmware wasn't setting the DSP3 mux up when both the LCD and HDMI
were disabled.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161214194621.16499-5-eric@anholt.net

drm/vc4: Add support for scaling of display planes.

This implements a simple policy for choosing scaling modes
(trapezoidal for decimation, PPF for magnification), and a single PPF
filter (Mitchell/Netravali's recommendation).

Signed-off-by: Eric Anholt <eric@anholt.net>

drm/vc4: Make the CRTCs cooperate on allocating display lists.

So far, we've only ever lit up one CRTC, so this has been fine. To
extend to more displays or more planes, we need to make sure we don't
run our display lists into each other.

Signed-off-by: Eric Anholt <eric@anholt.net>

drm/vc4: Fix some failure to track __iomem decorations on pointers.

Caught by the kbuild test robot.

v2: Fix the +i I dropped in the first version.

Signed-off-by: Eric Anholt <eric@anholt.net>

drm/vc4: Add KMS support for Raspberry Pi.

This is enough for fbcon and bringing up X using
xf86-video-modesetting. It doesn't support the 3D accelerator or
power management yet.

v2: Drop FB_HELPER select thanks to Archit's patches. Do manual init
ordering instead of using the .load hook. Structure registration
more like tegra's, but still using the typical "component" code.
Drop no-op hooks for atomic_begin and mode_fixup() now that
they're optional. Drop sentinel in Makefile. Fix minor style
nits I noticed on another reread.

v3: Use the new bcm2835 clk driver to manage pixel/HSM clocks instead
of having a fixed video mode. Use exynos-style component driver
matching instead of devicetree nodes to list the component driver
instances. Rename compatibility strings to say bcm2835, and
distinguish pv0/1/2. Clean up some h/vsync code, and add in
interlaced mode setup. Fix up probe/bind error paths. Use
bitops.h macros for vc4_regs.h

v4: Include i2c.h, allow building under COMPILE_TEST, drop msleep now
that other bugs have been fixed, add timeouts to cpu_relax()
loops, rename hpd-gpio to hpd-gpios.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>