drm/radeon: switch UVD code to use UVD_NO_OP for padding

Replace packet2's with packet0 writes to UVD_NO_OP. The
value written to UVD_NO_OP does not matter.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: disable semaphores for UVD V1 (v2)

Hardware doesn't seem to work correctly, just block userspace in this case.

v2: add missing defines

Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=85320

Signed-off-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: implement pci config reset for r6xx/7xx (v3)

pci config reset is a low level reset that resets
the entire chip from the bus interface. It can
be more reliable if soft reset fails.

There's not much information still available on
r6xx, so r6xx is based on guess-work.

v2: put behind module parameter
v3: add IGP check

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Fix hmdi typo

I keep making that one, so checked if I was the only one. Apparently
not.

Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: separate UVD code v3

Our different hardware blocks are actually completely
separated, so it doesn't make much sense any more to
structure the code by pure chipset generations.

Start restructuring the code by separating our the UVD block.

v2: updated commit message
v3: rebased and restructurized start/stop functions for kv dpm.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add debugfs support for 7xx/evergreen/btc

This allows you to look at the current DPM state via
debugfs.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/kms: add dpm support for rv7xx (v4)

This adds dpm support for rv7xx asics. This includes:
- clockgating
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2 switching

Set radeon.dpm=1 to enable.

v2: reduce stack usage
v3: fix 64 bit div
v4: fix state enable

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix UPLL_REF_DIV_MASK definition

Stupid copy & paste error over all generations.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: add UVD tiling addr config v2

v2: set UVD tiling config for rv730

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>

drm/radeon: add set_uvd_clocks callback for r7xx v3

v2: avoid 64bit divide
v3: rv740 uses the evegreen upll configuration

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>

drm/radeon: UVD bringup v8

Just everything needed to decode videos using UVD.

v6: just all the bugfixes and support for R7xx-SI merged in one patch
v7: UVD_CGC_GATE is a write only register, lockup detection fix
v8: split out VRAM fallback changes, remove support for RV770,
add support for HEMLOCK, add buffer sizes checks

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: add a asic callback to get the xclk

This is required to get the reference clock used
by the gfx engine for things like timestamps. Fixes
support for GL extensions the use timestamps on
certain boards.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/kms: Add initial support for async DMA on r6xx/r7xx

Uses the new multi-ring infrastucture. 6xx/7xx has a single
async DMA ring.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dce3.2: add registers for ELD handling

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: add some additional 6xx/7xx/EG register init

- SMX_SAR_CTL0 needs to be programmed correctly to prevent
problems with memory exports in certain cases.
- VC_ENHANCE needs to be initialized on 6xx/7xx.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon: fixup tiling group size and backendmap on r6xx-r9xx (v4)

Tiling group size is always 256bits on r6xx/r7xx/r8xx/9xx. Also fix and
simplify render backend map. This now properly sets up the backend map
on r6xx-9xx which should improve 3D performance.

Vadim benchmarked also:
Some benchmarks on juniper (5750), fullscreen 1920x1080,
first result - kernel 3.4.0+ (fb21affa), second - with these patches:

Lightsmark: 91 fps => 123 fps +35%
Doom3: 74 fps => 101 fps +36%

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon: properly program gart on rv740, juniper, cypress, barts, hemlock

Need to program an additional VM register. This doesn't not currently
cause any problems, but allows us to program the proper backend
map in a subsequent patch which should improve performance on these
asics.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: add register definitions for audio

This adds register definitions for HDMI/DP audio on
DCE2/3/4/5 hardware.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: 6xx/7xx big endian fixes

agd5f: minor cleanups

Signed-off-by: Cédric Cano <ccano@interfaceconcept.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: add support for gen2 pcie link speeds

Supported on rv6xx/r7xx/evergreen. Cards come up in gen1 mode.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: fix vram start calculation on ontario (v2)

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: MC setup changes for fusion APUs

- CONFIG_MEMSIZE is in bytes on fusion.
- FB_BASE and FB_TOP are finer grained.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: setup mc chremap properly on r7xx/evergreen

Should improve performance slightly and possibly fix some
issues.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: add pageflip ioctl support (v3)

This adds support for dri2 pageflipping.

v2: precision updates from Mario Kleiner.
v3: Multihead fixes from Mario Kleiner; missing crtc offset
add note about update pending bit on pre-avivo chips

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms/r7xx: add workaround for hw issue with HDP flush

Use of HDP_*_COHERENCY_FLUSH_CNTL can cause a hang in certain
situations. Add workaround.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: add support for internal thermal sensors (v3)

rv6xx/rv7xx/evergreen families supported; older asics did
not have an internal thermal sensor.

Note, not all oems use the internal thermal sensor, so it's
only exposed in cases where it is used.

Note also, that most laptops use an oem specific ACPI solution for
GPU thermal information rather than using the internal thermal
sensor directly.

v2: export millidegrees celsius, use hwmon device properly.
v3: fix Kconfig

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: add initial Evergreen support (Radeon HD 5xxx)

This adds initial Evergreen KMS support, it doesn't include
any acceleration features or interrupt handling yet.

Major changes are DCE4 handling for PLLs for the > 2 crtcs.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: fix vram_width calculation on r6xx/r7xx

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: add r600 KMS support

This adds the r600 KMS + CS support to the Linux kernel.

The r600 TTM support is quite basic and still needs more
work esp around using interrupts, but the polled fencing
should work okay for now.

Also currently TTM is using memcpy to do VRAM moves,
the code is here to use a 3D blit to do this, but
isn't fully debugged yet.

Authors:
Alex Deucher <alexdeucher@gmail.com>
Dave Airlie <airlied@redhat.com>
Jerome Glisse <jglisse@redhat.com>

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>