drm/radeon/ni_dpm: remove redundant NULL check

'leakage_table' will always be successfully initialized as a pointer
to '&rdev->pm.dpm.dyn_state.cac_leakage_table'.

Remove unnecessary check if only to silence static checkers.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool Svace.

Fixes: 69e0b57a91ad ("drm/radeon/kms: add dpm support for cayman (v5)")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix possible division-by-zero errors

Function rv740_get_decoded_reference_divider() may return 0 due to
unpredictable reference divider value calculated in
radeon_atom_get_clock_dividers(). This will lead to
division-by-zero error once that value is used as a divider
in calculating 'clk_s'.
While unlikely, this issue should nonetheless be prevented so add a
sanity check for such cases by testing 'decoded_ref' value against 0.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

v2: minor coding style fixes (Alex)
In practice this should actually happen as the vbios should be
properly populated.

Fixes: 66229b200598 ("drm/radeon/kms: add dpm support for rv7xx (v4)")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix potential buffer overflow in ni_set_mc_special_registers()

The last case label can write two buffers 'mc_reg_address[j]' and
'mc_data[j]' with 'j' offset equal to SMC_NISLANDS_MC_REGISTER_ARRAY_SIZE
since there are no checks for this value in both case labels after the
last 'j++'.

Instead of changing '>' to '>=' there, add the bounds check at the start
of the second 'case' (the first one already has it).

Also, remove redundant last checks for 'j' index bigger than array size.
The expression is always false. Moreover, before or after the patch
'table->last' can be equal to SMC_NISLANDS_MC_REGISTER_ARRAY_SIZE and it
seems it can be a valid value.

Detected using the static analysis tool - Svace.
Fixes: 69e0b57a91ad ("drm/radeon/kms: add dpm support for cayman (v5)")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/ni_dpm: Fix booting bug

Create new structure NISLANDS_SMC_SWSTATE_SINGLE, as initialState.levels
and ACPIState.levels are never actually used as flexible arrays. Those
arrays can be used as simple objects of type
NISLANDS_SMC_HW_PERFORMANCE_LEVEL, instead.

Currently, the code fails because flexible array _levels_ in
struct NISLANDS_SMC_SWSTATE doesn't allow for code that access
the first element of initialState.levels and ACPIState.levels
arrays:

drivers/gpu/drm/radeon/ni_dpm.c:
1690 table->initialState.levels[0].mclk.vMPLL_AD_FUNC_CNTL =
1691 cpu_to_be32(ni_pi->clock_registers.mpll_ad_func_cntl);
...
1903: table->ACPIState.levels[0].mclk.vMPLL_AD_FUNC_CNTL = cpu_to_be32(mpll_ad_func_cntl);
1904: table->ACPIState.levels[0].mclk.vMPLL_AD_FUNC_CNTL_2 = cpu_to_be32(mpll_ad_func_cntl_2);

because such element cannot exist without previously allocating
any dynamic memory for it (which never actually happens).

That's why struct NISLANDS_SMC_SWSTATE should only be used as type
for object driverState and new struct SISLANDS_SMC_SWSTATE_SINGLE is
created as type for objects initialState, ACPIState and ULVState.

Also, with the change from one-element array to flexible-array member
in commit 434fb1e7444a ("drm/radeon/nislands_smc.h: Replace one-element
array with flexible-array member in struct NISLANDS_SMC_SWSTATE"), the
size of dpmLevels in struct NISLANDS_SMC_STATETABLE should be fixed to
be NISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE instead of
NISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE - 1.

Bug: https://lore.kernel.org/dri-devel/3eedbe78-1fbd-4763-a7f3-ac5665e76a4a@xenosoft.de/
Fixes: 434fb1e7444a ("drm/radeon/nislands_smc.h: Replace one-element array with flexible-array member in struct NISLANDS_SMC_SWSTATE")
Cc: stable@vger.kernel.org
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Link: https://lore.kernel.org/dri-devel/9bb5fcbd-daf5-1669-b3e7-b8624b3c36f9@xenosoft.de/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/ni_dpm: Fix booting bug

Create new structure NISLANDS_SMC_SWSTATE_SINGLE, as initialState.levels
and ACPIState.levels are never actually used as flexible arrays. Those
arrays can be used as simple objects of type
NISLANDS_SMC_HW_PERFORMANCE_LEVEL, instead.

Currently, the code fails because flexible array _levels_ in
struct NISLANDS_SMC_SWSTATE doesn't allow for code that access
the first element of initialState.levels and ACPIState.levels
arrays:

drivers/gpu/drm/radeon/ni_dpm.c:
1690 table->initialState.levels[0].mclk.vMPLL_AD_FUNC_CNTL =
1691 cpu_to_be32(ni_pi->clock_registers.mpll_ad_func_cntl);
...
1903: table->ACPIState.levels[0].mclk.vMPLL_AD_FUNC_CNTL = cpu_to_be32(mpll_ad_func_cntl);
1904: table->ACPIState.levels[0].mclk.vMPLL_AD_FUNC_CNTL_2 = cpu_to_be32(mpll_ad_func_cntl_2);

because such element cannot exist without previously allocating
any dynamic memory for it (which never actually happens).

That's why struct NISLANDS_SMC_SWSTATE should only be used as type
for object driverState and new struct SISLANDS_SMC_SWSTATE_SINGLE is
created as type for objects initialState, ACPIState and ULVState.

Also, with the change from one-element array to flexible-array member
in commit 434fb1e7444a ("drm/radeon/nislands_smc.h: Replace one-element
array with flexible-array member in struct NISLANDS_SMC_SWSTATE"), the
size of dpmLevels in struct NISLANDS_SMC_STATETABLE should be fixed to
be NISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE instead of
NISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE - 1.

Bug: https://lore.kernel.org/dri-devel/3eedbe78-1fbd-4763-a7f3-ac5665e76a4a@xenosoft.de/
Fixes: 434fb1e7444a ("drm/radeon/nislands_smc.h: Replace one-element array with flexible-array member in struct NISLANDS_SMC_SWSTATE")
Cc: stable@vger.kernel.org
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Link: https://lore.kernel.org/dri-devel/9bb5fcbd-daf5-1669-b3e7-b8624b3c36f9@xenosoft.de/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/btc_dpm: Move 'evergreen_get_pi's prototype to shared header

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/radeon/rv770_dpm.c:62:30: warning: no previous prototype for ‘evergreen_get_pi’ [-Wmissing-prototypes]
62 | struct evergreen_power_info *evergreen_get_pi(struct radeon_device *rdev)
| ^~~~~~~~~~~~~~~~

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/rv770: Move 'rv770_get_*()'s prototypes to shared header

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/radeon/rv770_dpm.c:47:18: warning: no previous prototype for ‘rv770_get_ps’ [-Wmissing-prototypes]
47 | struct rv7xx_ps *rv770_get_ps(struct radeon_ps *rps)
| ^~~~~~~~~~~~
drivers/gpu/drm/radeon/rv770_dpm.c:54:26: warning: no previous prototype for ‘rv770_get_pi’ [-Wmissing-prototypes]
54 | struct rv7xx_power_info *rv770_get_pi(struct radeon_device *rdev)
| ^~~~~~~~~~~~

Cc: Evan Quan <evan.quan@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix fb_div check in ni_init_smc_spll_table()

clk_s is checked twice in a row in ni_init_smc_spll_table().
fb_div should be checked instead.

Fixes: 69e0b57a91ad ("drm/radeon/kms: add dpm support for cayman (v5)")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix fb_div check in ni_init_smc_spll_table()

clk_s is checked twice in a row in ni_init_smc_spll_table().
fb_div should be checked instead.

Fixes: 69e0b57a91ad ("drm/radeon/kms: add dpm support for cayman (v5)")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: Replace one-element array and use struct_size() helper

The current codebase makes use of one-element arrays in the following
form:

struct something {
int length;
u8 data[1];
};

struct something *instance;

instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL);
instance->length = size;
memcpy(instance->data, source, size);

but the preferred mechanism to declare variable-length types such as
these ones is a flexible array member[1][2], introduced in C99:

struct foo {
int stuff;
struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on. So, replace
the one-element array with a flexible-array member.

Also, make use of the new struct_size() helper to properly calculate the
size of struct NISLANDS_SMC_SWSTATE.

This issue was found with the help of Coccinelle and, audited and fixed
_manually_.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Don't include <drm/drm_pci.h>

Including <drm/drm_pci.h> is unnecessary in most cases. Replace
these instances.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203100406.9674-9-tzimmermann@suse.de

drm/radeon: drop use of drmP.h (2/2)

Drop use of drmP.h in remaining .c files.
To ease review a little the drmP.h removal was divided in two commits.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608080241.4958-8-sam@ravnborg.org

treewide: kzalloc() -> kcalloc()

The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:

kzalloc(a * b, gfp)

with:
kcalloc(a * b, gfp)

as well as handling cases of:

kzalloc(a * b * c, gfp)

with:

kzalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

kzalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

kzalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
kzalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kzalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
kzalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kzalloc
+ kcalloc
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
kzalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
kzalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
kzalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
kzalloc(sizeof(THING) * C2, ...)
|
kzalloc(sizeof(TYPE) * C2, ...)
|
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * E2
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- E1 * E2
+ E1, E2
, ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>

drm/radeon: fix include notation and remove -Iinclude/drm flag

Include <drm/*.h> instead of relative path from include/drm, then
remove the -Iinclude/drm compiler flag.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1493009447-31524-14-git-send-email-yamada.masahiro@socionext.com

drm/radeon: fix indentation.

I hate doing this but it hurts my eyes to go over code that does not
comply with indentation rules. Only thing that is not only space change
is in atom.c all other files are space indentation issues.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/ni: implement get_current_sclk/mclk

Will be used for exposing current clocks via INFO ioctl.

Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: comment out some currently unused ni dpm code

Keep it around for reference.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: reduce sparse false positive warnings

include radeon_asic.h header file in the various xxx_dpm.c files
to reduce sparse false positive warnings. Not so great patch
in itself, but reducing warning count from 391 to 258 may help
to see real problems..

Signed-off-by: Michele Curti <michele.curti@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: drop clk/voltage dependency filters for NI

No longer needed now that the underlying bug was fixed in
b0880e87c1fd038b84498944f52e52c3e86ebe59
(drm/radeon/dpm: fix vddci setup typo on cayman).

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69721

Reviewed-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Tested-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: fix vddci setup typo on cayman

We were using the vddc mask rather than the vddci mask.

Bug:
https://bugzilla.kernel.org/show_bug.cgi?id=79071

May also fix:
https://bugs.freedesktop.org/show_bug.cgi?id=69723

Noticed by: Dieter Nützel <Dieter@nuetzel-hh.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/radeon/ni: fix typo in dpm sq ramping setup

inverted logic.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/radeon/dpm: move platform caps fetching to a separate function

It's needed by by both the asic specific functions and the
extended table parser.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: use stored max_vddc rather than looking it up

When we parse the power tables use the stored mac_vddc value
rather than lookig it up manually each time.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: use the driver state for dpm debugfs

For btc and newer, we may modify the power state depending
on the circumstances. Use the modified state rather than
the base state.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/pm: move pm handling into the asic specific code

We need more control over the ordering of dpm init with
respect to the rest of the asic. Specifically, the SMC
has to be initialized before the rlc and cg/pg. The pm
code currently initializes late in the driver, but we need
it to happen much earlier so move pm handling into the asic
specific callbacks.

This makes dpm more reliable and makes clockgating work
properly on CIK parts and should help on SI parts as well.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: switch on new late_enable callback

Right now it's called right after enable, but after
reworking the dpm init order, it will get called later
to accomodate loading the smc early, but enabling
thermal interrupts and block powergating later after
the ring tests are complete.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: simplify state adjust logic for NI

This is based on a similar patch from Alexandre Demers.
While fixing up some warnings with that patch I saw some
additional cleanups that could be applied. This patch
simplifies the logic for patching the power state.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Alexandre Demers <alexandre.f.demers@gmail.com>

drm: radeon: ni_dpm: Fix unused variable warning when CONFIG_ACPI=n

With CONFIG_ACPI=n the following build warning is seen:

drivers/gpu/drm/radeon/ni_dpm.c:3448:31: warning: unused variable 'eg_pi' [-Wunused-variable]

Move the definition of eg_pi inside the CONFIG_ACPI 'if' block.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm/ni: filter clocks based on voltage/clk dep tables

filter out mclk and sclk levels higher than listed in the clk
voltage dependency tables. Supporting these clocks will require
additional driver tweaking that isn't supported yet.

See bug:
https://bugs.freedesktop.org/show_bug.cgi?id=68235

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: rework auto performance level enable

Calling force_performance_level() from set_power_state()
doesn't work on some asics because the current power
state pointer has not been properly updated at that point.
Move the calls to force_performance_level() out of the
asic specific set_power_state() functions and into
the main power state sequence.

Fixes dpm resume on SI.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2)

Check to make sure the dc limits are valid before using them.
Some systems may not have a dc limits table. In that case just
use the ac limits. This fixes hangs on systems when the power
state is changed when on battery (dc) due to invalid performance
state parameters.

Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=68708

v2: fix up limits in dpm_init()

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/radeon: gcc fixes for ni dpm

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs. Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: adjust the vblank time checks for eg, ni, si

According to the internal teams, we never hit the limit for
mclk switching on these asics, so we can disable the check.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: fix spread spectrum setup (v2)

Need to check for engine and memory clock ss separately
and only enable dynamic ss if either of them are found.

This should fix systems which have a ss table, but do
not have entries for engine or memory. On those systems
we may enable dynamic spread spectrum without enabling
it on the engine or memory clocks which can lead to a
hang in some cases.

fixes some systems reported here:
https://bugs.freedesktop.org/show_bug.cgi?id=66963

v2: fix typo

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: adjust thermal protection requirements

On rv770 and newer, clock gating is not required
for thermal protection. The only requirement is that
the design utilizes a thermal sensor.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: fix forcing performance state to low on cayman

Need to program EnabledLevels to 1 to force the low state.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: implement vblank_too_short callback for cayman

Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: implement force performance level for cayman

Allows you to force a performance level via sysfs.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: fix compilation with certain versions of gcc

Add #include <linux/seq_file.h> to *_dpm.c files

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add debugfs support for cayman

This allows you to look at the current DPM state via
debugfs.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: re-enable state transitions for Cayman

Was disabled due to stability issues on certain boards
caused by the a bug in the parsing of the atom mc reg tables.
That's fixed now so re-enable.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/NI: fix TDP adjustment in set_power_state

Fixes hangs with DPM in some cases.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: fix UVD clock setting on cayman

The rv770 version was using the wrong power state type.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix typo in ni_print_power_state

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add dpm_set_power_state failure output (7xx-ni)

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add dpm_set_power_state failure output (7xx-ni)

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add dpm_enable failure output (7xx-ni)

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/kms: add dpm support for SI (v7)

This adds dpm support for SI asics. This includes:
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2/gen3 switching
- power containment
- shader power scaling

Set radeon.dpm=1 to enable.

v2: enable hainan support, rebase
v3: guard acpi stuff
v4: fix 64 bit math
v5: fix 64 bit div harder
v6: fix thermal interrupt check noticed by Jerome
v7: attempt fix state enable

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm/ni: properly catch errors in dpm setup

We weren't properly catching errors in dpm_enable()
and dpm_set_power_state().

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: update radeon_atombios_get_default_voltages for mvdd

Add a way to look up the bootup mvdd. Required for DPM on SI.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: validate voltages against dispclk requirements

Validate the voltages against the voltage requirements of the
dispclk. We currently don't adjust the disp clock so it never
changes, but we need to filter out voltage levels that are too
low none the less.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm/cayman: use new fixed point functions (v2)

Use the new fixed point functions for leakage
calculations on cayman.

v2: fix up 64 bit math

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: update radeon_atom_is_voltage_gpio() for SI

SI uses a new atom table. Required for DPM on SI.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: add missing UVD clock set in cayman dpm code

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add pre/post_set_power_state callback (cayman)

This properly implemented dynamic state adjustment by
using a working copy of the requested and current
power states.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm/cayman: restructure code

Needed to properly handle dynamic state adjustment.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm/btc: restructure code

Needed to properly handle dynamic state adjustment.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/kms: add dpm support for cayman (v5)

This adds dpm support for cayman asics. This includes:
- clockgating
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2 switching (requires additional acpi support)
- power containment
- shader power scaling

Set radeon.dpm=1 to enable.

v2: fold in tdp fix
v3: fix indentation
v4: fix 64 bit div
v5: attempt to fix state enable

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>