#
f8c37b88 |
|
04-Aug-2023 |
Douglas Anderson <dianders@chromium.org> |
drm/panel: Don't store+check prepared/enabled for simple cases As talked about in commit d2aacaf07395 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. This pile of panel drivers appears to be simple to handle. Based on code inspection they seemed to be using the prepared/enabled state simply for double-checking that nothing else in the kernel called them inconsistently. Now that the core drm_panel is doing the double checking (and warning) it should be very clear that these devices don't need their own double-check. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230804140605.RFC.1.Ia54954fd2f7645c1b86597494902973f57feeb71@changeid
|
#
956c5ff2 |
|
07-Jan-2023 |
Javier Martinez Canillas <javierm@redhat.com> |
drm/panel-samsung-s6e88a0-ams452ef01: Drop custom DSI write macro There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-9-javierm@redhat.com
|
#
79abca2b |
|
08-Jul-2022 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
drm/mipi-dsi: Make remove callback return void All implementations return 0 and the return value of mipi_dsi_drv_remove() is ignored anyhow. So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220708094922.1408248-4-u.kleine-koenig@pengutronix.de
|
#
9bf7123b |
|
23-Sep-2021 |
Brian Norris <briannorris@chromium.org> |
drm/panel: Delete panel on mipi_dsi_attach() failure Many DSI panel drivers fail to clean up their panel references on mipi_dsi_attach() failure, so we're leaving a dangling drm_panel reference to freed memory. Clean that up on failure. Noticed by inspection, after seeing similar problems on other drivers. Therefore, I'm not marking Fixes/stable. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.3.If9e74fa9b1d6eaa9e0e5b95b2b957b992740251c@changeid
|
#
c3ee8c65 |
|
01-Aug-2020 |
Bernard Zhao <bernard@vivo.com> |
drm/panel: remove return value of function drm_panel_add The function "int drm_panel_add(struct drm_panel *panel)" always returns 0, this return value is meaningless. Also, there is no need to check return value which calls "drm_panel_add and", error branch code will never run. Signed-off-by: Bernard Zhao <bernard@vivo.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200801120216.8488-1-bernard@vivo.com
|
#
0425662f |
|
28-Apr-2020 |
Ville Syrjälä <ville.syrjala@linux.intel.com> |
drm: Nuke mode->vrefresh Get rid of mode->vrefresh and just calculate it on demand. Saves a bit of space and avoids the cached value getting out of sync with reality. Mostly done with cocci, with the following manual fixups: - Remove the now empty loop in drm_helper_probe_single_connector_modes() - Fix __MODE() macro in ch7006_mode.c - Fix DRM_MODE_ARG() macro in drm_modes.h - Remove leftover comment from samsung_s6d16d0_mode - Drop the TODO @@ @@ struct drm_display_mode { ... - int vrefresh; ... }; @@ identifier N; expression E; @@ struct drm_display_mode N = { - .vrefresh = E }; @@ identifier N; expression E; @@ struct drm_display_mode N[...] = { ..., { - .vrefresh = E } ,... }; @@ expression E; @@ { DRM_MODE(...), - .vrefresh = E, } @@ identifier M, R; @@ int drm_mode_vrefresh(const struct drm_display_mode *M) { ... - if (M->vrefresh > 0) - R = M->vrefresh; - else if (...) { ... } ... } @@ struct drm_display_mode *p; expression E; @@ ( - p->vrefresh = E; | - p->vrefresh + drm_mode_vrefresh(p) ) @@ struct drm_display_mode s; expression E; @@ ( - s.vrefresh = E; | - s.vrefresh + drm_mode_vrefresh(&s) ) @@ expression E; @@ - drm_mode_vrefresh(E) ? drm_mode_vrefresh(E) : drm_mode_vrefresh(E) + drm_mode_vrefresh(E) @find_substruct@ identifier X; identifier S; @@ struct X { ... struct drm_display_mode S; ... }; @@ identifier find_substruct.S; expression E; identifier I; @@ { .S = { - .vrefresh = E } } @@ identifier find_substruct.S; identifier find_substruct.X; expression E; identifier I; @@ struct X I[...] = { ..., .S = { - .vrefresh = E } ,... }; v2: Drop TODO v3: Rebase v4: Rebase Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Purism Kernel Team <kernel@puri.sm> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-4-ville.syrjala@linux.intel.com
|
#
6d598a32 |
|
30-Jan-2020 |
Michael Srba <Michael.Srba@seznam.cz> |
drm/panel: Add Samsung s6e88a0-ams452ef01 panel driver Add driver for Samsung AMS452EF01 AMOLED panel, which makes use of their S6E88A0 controller. Signed-off-by: Michael Srba <Michael.Srba@seznam.cz> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [fixed checkpatch warnings, added changelog] Link: https://patchwork.freedesktop.org/patch/msgid/20200130203555.316-2-michael.srba@seznam.cz
|