#
722d4f06 |
|
14-Jul-2023 |
Rob Herring <robh@kernel.org> |
drm: Explicitly include correct DT includes The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org
|
#
79abca2b |
|
08-Jul-2022 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
drm/mipi-dsi: Make remove callback return void All implementations return 0 and the return value of mipi_dsi_drv_remove() is ignored anyhow. So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220708094922.1408248-4-u.kleine-koenig@pengutronix.de
|
#
32a267e9 |
|
23-Sep-2021 |
Brian Norris <briannorris@chromium.org> |
drm/panel: innolux-p079zca: Delete panel on attach() failure If we fail to attach (e.g., because 1 of 2 dual-DSI controllers aren't ready), we leave a dangling drm_panel reference to freed memory. Clean that up on failure. This problem exists since the driver's introduction, but is especially relevant after refactored for dual-DSI variants. Fixes: 14c8f2e9f8ea ("drm/panel: add Innolux P079ZCA panel driver") Fixes: 7ad4e4636c54 ("drm/panel: p079zca: Refactor panel driver to support multiple panels") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.2.I9023cf8811a3abf4964ed84eb681721d8bb489d6@changeid
|
#
a25b6b27 |
|
15-Aug-2020 |
Sam Ravnborg <sam@ravnborg.org> |
drm/panel: Use dev_ based logging Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-6-sam@ravnborg.org
|
#
c3ee8c65 |
|
01-Aug-2020 |
Bernard Zhao <bernard@vivo.com> |
drm/panel: remove return value of function drm_panel_add The function "int drm_panel_add(struct drm_panel *panel)" always returns 0, this return value is meaningless. Also, there is no need to check return value which calls "drm_panel_add and", error branch code will never run. Signed-off-by: Bernard Zhao <bernard@vivo.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200801120216.8488-1-bernard@vivo.com
|
#
0425662f |
|
28-Apr-2020 |
Ville Syrjälä <ville.syrjala@linux.intel.com> |
drm: Nuke mode->vrefresh Get rid of mode->vrefresh and just calculate it on demand. Saves a bit of space and avoids the cached value getting out of sync with reality. Mostly done with cocci, with the following manual fixups: - Remove the now empty loop in drm_helper_probe_single_connector_modes() - Fix __MODE() macro in ch7006_mode.c - Fix DRM_MODE_ARG() macro in drm_modes.h - Remove leftover comment from samsung_s6d16d0_mode - Drop the TODO @@ @@ struct drm_display_mode { ... - int vrefresh; ... }; @@ identifier N; expression E; @@ struct drm_display_mode N = { - .vrefresh = E }; @@ identifier N; expression E; @@ struct drm_display_mode N[...] = { ..., { - .vrefresh = E } ,... }; @@ expression E; @@ { DRM_MODE(...), - .vrefresh = E, } @@ identifier M, R; @@ int drm_mode_vrefresh(const struct drm_display_mode *M) { ... - if (M->vrefresh > 0) - R = M->vrefresh; - else if (...) { ... } ... } @@ struct drm_display_mode *p; expression E; @@ ( - p->vrefresh = E; | - p->vrefresh + drm_mode_vrefresh(p) ) @@ struct drm_display_mode s; expression E; @@ ( - s.vrefresh = E; | - s.vrefresh + drm_mode_vrefresh(&s) ) @@ expression E; @@ - drm_mode_vrefresh(E) ? drm_mode_vrefresh(E) : drm_mode_vrefresh(E) + drm_mode_vrefresh(E) @find_substruct@ identifier X; identifier S; @@ struct X { ... struct drm_display_mode S; ... }; @@ identifier find_substruct.S; expression E; identifier I; @@ { .S = { - .vrefresh = E } } @@ identifier find_substruct.S; identifier find_substruct.X; expression E; identifier I; @@ struct X I[...] = { ..., .S = { - .vrefresh = E } ,... }; v2: Drop TODO v3: Rebase v4: Rebase Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Purism Kernel Team <kernel@puri.sm> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-4-ville.syrjala@linux.intel.com
|
#
16793e00 |
|
07-Dec-2019 |
Sam Ravnborg <sam@ravnborg.org> |
drm/panel: innolux-p079zca: use drm_panel backlight support Use the backlight support in drm_panel to simplify the driver Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-11-sam@ravnborg.org
|
#
aa6c4364 |
|
07-Dec-2019 |
Sam Ravnborg <sam@ravnborg.org> |
drm/panel: drop drm_device from drm_panel The panel drivers used drm_panel.drm for two purposes: 1) Argument to drm_mode_duplicate() 2) drm->dev was used in error messages The first usage is replaced with drm_connector.dev - drm_connector is already connected to a drm_device and we have a valid connector The second usage is replaced with drm_panel.dev - this makes drivers more consistent in their dev argument used for dev_err() and friends With these replacements there are no more uses of drm_panel.drm, so it is removed from struct drm_panel. With this change drm_panel_attach() and drm_panel_detach() no longer have any use as they are empty functions. v2: - editorial correction in changelog (Laurent) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Purism Kernel Team <kernel@puri.sm> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-8-sam@ravnborg.org
|
#
0ce8ddd8 |
|
07-Dec-2019 |
Sam Ravnborg <sam@ravnborg.org> |
drm/panel: add drm_connector argument to get_modes() Today the bridge creates the drm_connector, but that is planned to be moved to the display drivers. To facilitate this, update drm_panel_funcs.get_modes() to take drm_connector as an argument. All panel drivers implementing get_modes() are updated. v2: - drop accidental change (Laurent) - update docs for get_modes (Laurent) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Purism Kernel Team <kernel@puri.sm> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-6-sam@ravnborg.org
|
#
9a2654c0 |
|
04-Sep-2019 |
Laurent Pinchart <laurent.pinchart@ideasonboard.com> |
drm/panel: Add and fill drm_panel type field Add a type field to the drm_panel structure to report the panel type, using DRM_MODE_CONNECTOR_* macros (the values that make sense are LVDS, eDP, DSI and DPI). This will be used to initialise the corresponding connector type. Update all panel drivers accordingly. The panel-simple driver only specifies the type for the known to be LVDS panels, while all other panels are left as unknown and will be converted on a case-by-case basis as they all need to be carefully reviewed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190904132804.29680-2-laurent.pinchart@ideasonboard.com
|
#
6dbe0c4b |
|
23-Aug-2019 |
Laurent Pinchart <laurent.pinchart@ideasonboard.com> |
drm/panel: Initialise panel dev and funcs through drm_panel_init() Instead of requiring all drivers to set the dev and funcs fields of drm_panel manually after calling drm_panel_init(), pass the data as arguments to the function. This simplifies the panel drivers, and will help future refactoring when adding new arguments to drm_panel_init(). The panel drivers have been updated with the following Coccinelle semantic patch, with manual inspection to verify that no call to drm_panel_init() with a single argument still exists. @@ expression panel; expression device; identifier ops; @@ drm_panel_init(&panel + , device, &ops ); ... ( -panel.dev = device; -panel.funcs = &ops; | -panel.funcs = &ops; -panel.dev = device; ) Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190823193245.23876-3-laurent.pinchart@ideasonboard.com
|
#
2874c5fd |
|
27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
cb23eae3 |
|
26-May-2019 |
Sam Ravnborg <sam@ravnborg.org> |
drm/panel: drop drmP.h usage Drop use of the deprecated drmP.h header file. While touching the list of include files: - Divide include files in blocks of linux/* video/* drm/* etc. Be consistent in the order of the blocks - Sort individual blocks of include files Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190526180532.1641-3-sam@ravnborg.org
|
#
90fd6ba6 |
|
26-May-2019 |
Sam Ravnborg <sam@ravnborg.org> |
drm/panel: panel-innolux: drop unused variable The num_supplies variable is not used, delete it. Build tested. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190526180532.1641-2-sam@ravnborg.org
|
#
46f3ceaf |
|
08-Jan-2019 |
Hsin-Yi, Wang <hsinyi@chromium.org> |
drm/panel: panel-innolux: set display off in innolux_panel_unprepare Move mipi_dsi_dcs_set_display_off() from innolux_panel_disable() to innolux_panel_unprepare(), so they are consistent with innolux_panel_enable() and innolux_panel_prepare(). This also fixes some mode check and irq timeout issue in MTK dsi code. Since some dsi code (e.g. mtk_dsi) have following call trace: 1. drm_panel_disable(), which calls innolux_panel_disable() 2. switch to cmd mode 3. drm_panel_unprepare(), which calls innolux_panel_unprepare() However, mtk_dsi needs to be in cmd mode to be able to send commands (e.g. mipi_dsi_dcs_set_display_off() and mipi_dsi_dcs_enter_sleep_mode()), so we need these functions to be called after the switch to cmd mode happens, i.e. in innolux_panel_unprepare. Signed-off-by: Hsin-Yi, Wang <hsinyi@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190109065922.231753-1-hsinyi@chromium.org
|
#
882c35af |
|
16-Aug-2018 |
Heiko Stuebner <heiko@sntech.de> |
drm/panel: p079zca: unconditionally remove the panel on removal There is no need to check innolux->base.dev when trying to remove the panel, as that variable is always set directly before the panel gets added and will still be available on panel_remove. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180816140920.5009-1-heiko@sntech.de
|
#
b6d83fcc |
|
09-Jul-2018 |
Thierry Reding <treding@nvidia.com> |
drm/panel: p079zca: Use of_device_get_match_data() Use this helper to get rid of some extra boilerplate code. Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180710110127.12315-1-thierry.reding@gmail.com
|
#
de04a462 |
|
01-Jul-2018 |
Lin Huang <hl@rock-chips.com> |
drm/panel: p079zca: Support Innolux P097PFG panel Support Innolux P097PFG 9.7" 1536x2048 TFT LCD panel, it reuse the Innolux P079ZCA panel driver. Changes in v2: - None Changes in v3: - None Changes in v4: - None Changes in v5: - Document source of init-commands - 4 lanes per DSI interface Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180702102721.3546-5-heiko@sntech.de
|
#
48bd379a |
|
01-Jul-2018 |
Lin Huang <hl@rock-chips.com> |
drm/panel: p079zca: Add variable unprepare_delay properties When panel power down, p079zca need delay between reset and disable power supply, but p097pfg does not need it. Similarly p097zca needs a delay after entering panel sleep mode. So add two delay properties, so we can meet these two panel power down sequence. Signed-off-by: Lin Huang <hl@rock-chips.com> [add sleep-mode delay] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180702102721.3546-3-heiko@sntech.de
|
#
7ad4e463 |
|
01-Jul-2018 |
Lin Huang <hl@rock-chips.com> |
drm/panel: p079zca: Refactor panel driver to support multiple panels Refactor Innolux P079ZCA panel driver, let it support multi panels from Innolux that share similar power sequences. Panels may require different power supplies so use regulator bulk interfaces and define per panel supply-names. Changes in v2: - Change regulator property name to meet the panel datasheet Changes in v3: - this patch only refactor P079ZCA panel to support multi panel, support P097PFG panel in another patch Changes in v4: - Modify the patch which suggest by Thierry Changes in v5: - use regulator_bulk to handle different supply number Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180702102721.3546-2-heiko@sntech.de
|
#
38992c57 |
|
26-Apr-2018 |
Jyri Sarha <jsarha@ti.com> |
drm/panel: Remove drm_panel_detach() calls from all panel drivers Remove all drm_panel_detach() calls from all panel drivers and update the kerneldoc for drm_panel_detach(). Setting the connector and drm to NULL when the DRM panel device is going away hardly serves any purpose. Usually the whole memory structure is freed right after the remove call. However, calling the detach function from the master DRM device, and setting the connector pointer to NULL, has the logic of marking the panel again as available for another DRM master to attach. The usual situation would be the same DRM master device binding again. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/464b8d330d6b4c94cfb5aad2ca9ea7eb2c52d934.1524727888.git.jsarha@ti.com
|
#
c69f9457 |
|
24-Jan-2018 |
Meghana Madhyastha <meghana.madhyastha@gmail.com> |
drm/panel: Use of_find_backlight helper Replace of_find_backlight_by_node and of the code around it with of_find_backlight helper to avoid repetition of code. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/140d01afb138d687680b2d1776a4c101c9fa9a0a.1516810725.git.meghana.madhyastha@gmail.com
|
#
d593bfdb |
|
24-Jan-2018 |
Meghana Madhyastha <meghana.madhyastha@gmail.com> |
drm/panel: Use backlight_enable/disable helpers Use backlight_enable/disable helpers instead of changing the property and calling backlight_update_status for cleaner and simpler code and also to avoid repetitions. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/bc80cdb5cf1a6638dce9fb9f8da674e361e3b749.1516810725.git.meghana.madhyastha@gmail.com
|
#
14c8f2e9 |
|
23-Mar-2017 |
Chris Zhong <zyw@rock-chips.com> |
drm/panel: add Innolux P079ZCA panel driver Support Innolux P079ZCA 7.85" 768x1024 TFT LCD panel, it is a MIPI DSI panel. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/1490316692-20506-2-git-send-email-zyw@rock-chips.com
|