drm/omap: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert the omap drm driver from always returning zero in the
remove callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-35-u.kleine-koenig@pengutronix.de

drm/omap: dsi: Fix excessive stack usage

dsi_dump_dsi_irqs(), a function used for debugfs prints, has a large
struct in its frame, which can result in:

drivers/gpu/drm/omapdrm/dss/dsi.c:1126:1: warning: the frame size of 1060 bytes is larger than 1024 bytes [-Wframe-larger-than=]

As the performance of the function is of no concern, let's allocate the
struct with kmalloc instead.

Compile-tested only.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916082206.167427-1-tomi.valkeinen@ideasonboard.com

omapdrm: dss: mark runtime PM functions __maybe_unused

Using the SET_RUNTIME_PM_OPS() macro causes a warning about the
referenced functions when they are marked static but not __maybe_unused:

drivers/gpu/drm/omapdrm/dss/dss.c:1572:12: error: unused function 'dss_runtime_suspend' [-Werror,-Wunused-function]
drivers/gpu/drm/omapdrm/dss/dss.c:1584:12: error: unused function 'dss_runtime_resume' [-Werror,-Wunused-function]
drivers/gpu/drm/omapdrm/dss/dispc.c:4845:12: error: unused function 'dispc_runtime_suspend' [-Werror,-Wunused-function]
drivers/gpu/drm/omapdrm/dss/dispc.c:4860:12: error: unused function 'dispc_runtime_resume' [-Werror,-Wunused-function]

Fixes: b92f7ea556f8 ("drm/omap: dss: Make use of the helper macro SET_RUNTIME_PM_OPS()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211205131612.3192652-1-arnd@kernel.org

drm/omap: Make use of the helper function devm_platform_ioremap_resourcexxx()

Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831135707.4676-1-caihuoqing@baidu.com

drm/omap: dss: Make use of the helper macro SET_RUNTIME_PM_OPS()

Use the helper macro SET_RUNTIME_PM_OPS() instead of the verbose
operators ".runtime_suspend/.runtime_resume", because the
SET_RUNTIME_PM_OPS() is a nice helper macro that could be brought
in to make code a little clearer, a little more concise.

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210828084811.104-1-caihuoqing@baidu.com

drm/omap: Use correct printk format specifiers for size_t

The correct format specifier for size_t is %zu. Using %d (or %u)
generates a warning on 64-bit platforms. Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

drm/omap: dsi: Add missing IRQF_ONESHOT

fixed the following coccicheck:
./drivers/gpu/drm/omapdrm/dss/dsi.c:4329:7-27: ERROR: Threaded IRQ with
no primary handler requested without IRQF_ONESHOT

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fixes: 4c1b935fea54 ("drm/omap: dsi: move TE GPIO handling into core")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1616492093-68237-1-git-send-email-yang.lee@linux.alibaba.com

drm/omap: dsi: fix unreachable code in dsi_vc_send_short()

The 'r' in dsi_vc_send_short() is of type 'unsigned int', so the
'r < 0' can't be true.

Fix this by introducing a 'err' of type 'int' insteaded.

Fixes: 1ed6253856cb ("drm/omap: dsi: switch dsi_vc_send_long/short to mipi_dsi_msg")

Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127015117.23267-1-dong.menglong@zte.com.cn

drm/omap: dsi: fix unsigned expression compared with zero

r is "u32" always >= 0,mipi_dsi_create_packet may return little than zero.
so r < 0 condition is never accessible.

Fixes coccicheck warnings:
./drivers/gpu/drm/omapdrm/dss/dsi.c:2155:5-6:
WARNING: Unsigned expression compared with zero: r < 0

Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210312071445.1721-1-angkery@163.com

drm/omap: dsi: allow DSI commands to be sent early

Panel drivers can send DSI commands in panel's prepare(), which happens
before the bridge's enable() is called. The OMAP DSI driver currently
only sets up the DSI interface at bridge's enable(), so prepare() cannot
be used to send DSI commands.

This patch fixes the issue by making it possible to enable the DSI
interface any time a command is about to be sent. Disabling the
interface is be done via delayed work.

Clarifications for the delayed disable work and the panel doing DSI
transactions:

bridge_enable: If the disable callback is called just before
bridge_enable takes the dsi_bus_lock, no problem, bridge_enable just
enables the interface again. If the callback is ran just after
bridge_enable's dsi_bus_unlock, no problem, dsi->video_enabled == true
so the callback does nothing.

bridge_disable: similar to bridge-enable, the callback won't do anything
if video_enabled == true, and after bridge-disable has turned the video
and the interface off, there's nothing to do for the callback.

omap_dsi_host_detach: this is called when the panel does
mipi_dsi_detach(), and we expect the panel to _not_ do any DSI
transactions after (or during) mipi_dsi_detatch(), so there are no
race conditions.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-85-tomi.valkeinen@ti.com

drm/omap: dsi: fix DCS_CMD_ENABLE

We only need to set VC_CTRL:DCS_CMD_ENABLE for command mode panels when
the HW has DSI_QUIRK_DCS_CMD_CONFIG_VC quirk. The old code did this
right by accident, but now we set DCS_CMD_ENABLE for video mode panels
too.

Fix this by skipping the set for video mode.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-84-tomi.valkeinen@ti.com

drm/omap: dsi: remove ulps support

ULPS is a niche power-saving feature which only really affects command
mode panels showing a static picture. I know the ULPS code used to work
very long time ago, but I could not get it working with the current
driver. As the ULPS code is not trivial and includes delayed work (so
lots of chances for race issues), and just keeping DSI video and command
mode panels working has been challenging enough even without ULPS, lets
remove ULPS support.

When the DSI driver works reliably for command and video mode displays,
someone interested can work on ULPS and add it back if the power saving
is substantial enough.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-83-tomi.valkeinen@ti.com

drm/omap: dsi: fix and cleanup ddr_clk_always_on

The driver ignores MIPI_DSI_CLOCK_NON_CONTINUOUS, and always uses
non-continuous clock.

Fix this by using MIPI_DSI_CLOCK_NON_CONTINUOUS and at the same time,
drop ddr_clk_always_on field which seems pretty useless.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-82-tomi.valkeinen@ti.com

drm/omap: dsi: split video mode enable/disable into separate func

Clean up the code by separating video-mode enable/disable code into
functions of their own.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-81-tomi.valkeinen@ti.com

drm/omap: dsi: cleanup initial vc setup

As we now have a fixed setup for VCs (VC0 for video stream, VC1 for
commands), we can simplify the VC setup.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-80-tomi.valkeinen@ti.com

drm/omap: dsi: rename dsi_display_* functions

The function names have evolved to be very confusing, and bunch of them
have "display" in them even if the function doesn't deal with display as
such (e.g. dsi_display_enable which just enables the DSI interface).
Rename them by dropping the "display".

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-79-tomi.valkeinen@ti.com

drm/omap: dsi: display_disable cleanup

We can drop dsi_display_disable() which just calls
_dsi_display_disable(), and rename _dsi_display_disable() to
dsi_display_disable().

The WARN_ON(!dsi_bus_is_locked(dsi)) in dsi_display_disable is extra and
can be dropped, as _dsi_display_disable() has the same WARN_ON().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-78-tomi.valkeinen@ti.com

drm/omap: dsi: display_enable cleanup

We can drop dsi_display_enable(), which just calls
_dsi_display_enable(), and rename _dsi_display_enable() to
dsi_display_enable().

The WARN_ON(!dsi_bus_is_locked(dsi)) in dsi_display_enable is extra and
can be dropped, as _dsi_display_enable() has the same WARN_ON().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-77-tomi.valkeinen@ti.com

drm/omap: dsi: move enable/disable to bridge enable/disable

Clean up the code by inlining dsi_enable_video_outputs and
dsi_disable_video_outputs functions.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-76-tomi.valkeinen@ti.com

drm/omap: dsi: move structs & defines to dsi.h

Move structs and defines to a private dsi.h header file to make dsi.c a
bit easier to navigate. Also move the (now) private structs and defines
from omapdss.h to dsi.h.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-75-tomi.valkeinen@ti.com

drm/omap: dsi: use separate VCs for cmd and video

For command mode panels we can use a single VC for sending command and
video data, even if we have to change the data source for that VC when
going from command to video or vice versa.

However, with video mode panels we want to keep the pixel data VC
enabled, and use another VC for command data, and the commands will get
interleaved into the pixel data.

This patch makes the driver use VC0 for commands and VC1 for video.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-71-tomi.valkeinen@ti.com

drm/omap: dsi: enable HS before sending the frame

We currently use a single VC for sending commands and pixel data. The
LP/HS mode for pixel data is correctly set to HS by accident, as we have
set the VC to HS already earlier.

However, if we use a different VC for video data, the VC is in LP mode.
Fix this by always enabling HS mode before starting a frame update.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-70-tomi.valkeinen@ti.com

drm/omap: dsi: skip dsi_vc_enable_hs when already in correct mode

Simplify and optimize dsi_vc_enable_hs() so that it can be called
without checking the current HS/LP mode. Make dsi_vc_enable_hs() return
if the VC is already in the correct mode.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-69-tomi.valkeinen@ti.com

drm/omap: dsi: untangle vc & channel

DSI virtual channel and hardware VC blocks have gotten tangled as
described in the previous commits. This has not caused any issues, as
the value for both is 0, so it happens to work.

To fix the issue, change the code to use the correct one of the two.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-68-tomi.valkeinen@ti.com

drm/omap: dsi: pass vc and channel to various functions

To start fixing the issues related to channels and vcs described in the
previous commit, pass vc and/or channel to various functions which will
need it do properly handle different DSI channels and VCs.

No functional changes.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-67-tomi.valkeinen@ti.com

drm/omap: dsi: rename 'channel' to 'vc'

The "channel" usage in omap dsi driver is confusing. We have three
different "channels":

1) DSI virtual channel ID. This is a number from 0 to 3, included in the
packet payload.

2) VC. This is a register block in the DSI IP. There are four of those
blocks. A VC is a DSI "pipeline", with defined fifo settings, data
source (cpu or dispc), and some other settings. It has no relation to
the 1).

3) dispc channel. It's the "pipeline" number dispc uses to send pixel
data.

The previous patch handled the third case.

To start fixing 1) and 2), we first rename all uses of 'channel' to
'vc', as in most of the cases that is the correct thing to use.

However, in some places 1) and 2) have gotten mixed up (i.e. the code
uses msg->channel when it should use vc), which will be fixed in the
following patch.

Note that mixing 1) and 2) currently is "fine", as at the moment we only
support DSI peripherals with DSI virtual channel 0, and we always use
VC0 to send data. So both 1) and 2) are always 0.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-66-tomi.valkeinen@ti.com

drm/omap: dsi: cleanup dispc channel usage

The "channel" usage in omap dsi driver is confusing. As the first step,
change "channel" to "dispc_channel" when dealing with the dispc channel.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-65-tomi.valkeinen@ti.com

drm/omap: dsi: drop useless channel checks

A DSI peripheral can have virtual channel ID of 0-3. This should be
always the case, and there's no need in the driver to validate the
channel.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-64-tomi.valkeinen@ti.com

drm/omap: dsi: simplify VC handling

The VC handling has gotten quite tangled up. As the first step to clean
it up, lets define that we only support a single DSI peripheral (which
was really already the case), and we always use VC0 (define VC_DEFAULT
0) register block to send data to the peripheral.

We can thus have a single mipi_dsi_device pointer and remove the
for-loops which made passes over all the four VCs (just the first one
was ever used).

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-63-tomi.valkeinen@ti.com

drm/omap: dsi: send nop instead of page & column

The OMAP DSI command mode panel driver used to send page & column
address before each frame update, and this code was moved into the DSI
host driver when converting it to the DRM bridge model.

However, it's not really required to send the page & column address
before each frame. It's also something that doesn't really belong to the
DSI host driver, so we should drop the code.

That said, frame updates break if we don't send _something_ between the
frames. A NOP command does the trick.

It is not clear if this behavior is as expected from a DSI command mode
frame transfer, or is it a feature/issue with OMAP DSI driver, or a
feature/issue in the command mode panel used.

Most likely this is related to the following from the DSI spec:

"To enable PHY synchronization the host processor should periodically
end HS transmission and drive the Data Lanes to the LP state. This
transition should take place at least once per frame."

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-62-tomi.valkeinen@ti.com

drm/omap: dsi: set trans_mode according to client mode_flags

The DSI host driver currently ignores the video mode flags in
client->mode_flags. Add the code to take the transfer mode from client's
mode_flags.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-60-tomi.valkeinen@ti.com

drm/omap: drop unused owner field

dssdev->owner is set, but never used. We can drop the field.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-53-tomi.valkeinen@ti.com

drm/omap: dsi: simplify pin config

Simplify DSI pin config, which always originates from DT
nowadays. With the code being fully contained in the DSI
encoder, we can drop the public structure.

Since the function is no longer exposed, it now directly
takes the private DSI data pointer. This drops a pointless
conversion and means the pins can be configured earlier.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-49-tomi.valkeinen@ti.com

drm/omap: simplify DSI manual update code

Move dsi_ops into the main structure, since all other ops
are gone. Instead of checking the device type we can simply
check if dsi_ops are set.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-48-tomi.valkeinen@ti.com

drm/omap: dsi: Register a drm_bridge

In order to integrate with a chain of drm_bridge, the internal DSI
output has to expose its operations through the drm_bridge API.
Register a bridge at initialisation time to do so and remove the
omap_dss_device operations that are now unused.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-41-tomi.valkeinen@ti.com

drm/omap: dsi: implement check timings

Implement check timings, which will check if it's possible to
configure the clocks for the provided mode using the same code
as the set_config() hook.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-35-tomi.valkeinen@ti.com

drm/omap: dsi: convert to drm_panel

This converts the DSI module to expect common drm_panel display
drivers instead of dssdev based ones.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-33-tomi.valkeinen@ti.com

drm/omap: dsi: drop custom panel capability support

Due to previous changes the DSI encoder gets the capabilities
via DSI client's mode_flags and no longer needs the omapdss
specific caps. The core code now checks if the DSI encoder
is actually configured into command mode instead of just checking
the panel capabilities.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-32-tomi.valkeinen@ti.com

drm/omap: dsi: move panel refresh function to host

This moves the panel refresh/update function from the panel
driver into the DSI host driver to prepare for common drm_panel
support.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-30-tomi.valkeinen@ti.com

drm/omap: dsi: do ULPS in host driver

Move ULPS handling into the DSI host controller, so that we
no longer need a custom API for the DSI client.

Note that for now ULPS is always disabled.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-29-tomi.valkeinen@ti.com

drm/omap: dsi: untangle ulps ops from enable/disable

Create a custom function pointer for ULPS and use it instead of
reusing disable/enable functions for ULPS mode switch. This allows
us to use the common disable/enable functions pointers for DSI.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-28-tomi.valkeinen@ti.com

drm/omap: dsi: do bus locking in host driver

This moves the bus locking into the host driver and unexports
the custom API in preparation for drm_panel support.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-27-tomi.valkeinen@ti.com

drm/omap: dsi: drop custom enable_te() API

Instead of using the custom enable_te() API, this automatically
enables/disables TE core support when a matching packet is sent
to the panel.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-26-tomi.valkeinen@ti.com

drm/omap: dsi: move TE GPIO handling into core

In preparation for removing custom DSS calls from the DSI
panel driver, this moves support for external tearing event
GPIOs into the DSI host driver. This way tearing events are
always handled in the core resulting in simplification of
the panel drivers.

The TE GPIO acquisition follows works in the same way as the
exynos DSI implementation.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-25-tomi.valkeinen@ti.com

drm/omap: dsi: lp/hs switching support for transfer()

Integrate low-power / high-speed bus switching into transfer
function and drop the omapdrm specific enable_hs() callback.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-24-tomi.valkeinen@ti.com

drm/omap: dsi: use pixel-format and mode from attach

In order to reduce the amount of custom functionality, this moves
handling of pixel format and DSI mode from set_config() to dsi
attach.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-22-tomi.valkeinen@ti.com

drm/omap: dsi: request VC via mipi_dsi_attach

Drop custom request_vc/release_vc callbacks by using the
generic mipi_dsi_attach/mipi_dsi_detach functions.

To use mipi_dsi_attach() we need to fill in the mipi_dsi_device fields,
and some of these fields overlap with the fields in omap_dss_dsi_config.
In later patches the latter will get dropped.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-15-tomi.valkeinen@ti.com

drm/omap: dsi: introduce mipi_dsi_host

This moves from custom platform driver infrastructure to mipi_dsi_host
and mipi_dsi_device. Note, that this is a graduate step and the driver
only uses the devices types and transfer function, but not yet the new
device binding style or drm_panel.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-13-tomi.valkeinen@ti.com

drm/omap: dsi: switch dsi_vc_send_long/short to mipi_dsi_msg

Simplify the DSI encoder by using mipi_dsi_msg for
dsi_vc_send_long and dsi_vc_send_short. Further improvements
require cleaning up the channel allocation code first.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-12-tomi.valkeinen@ti.com

drm/omap: dsi: simplify read functions

Simplify the read related message handling by using the functionality
provided by CONFIG_DRM_MIPI_DSI.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-11-tomi.valkeinen@ti.com

drm/omap: dsi: simplify write function

Simplify the write related messages handling by using the functionality
provided by CONFIG_DRM_MIPI_DSI.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-10-tomi.valkeinen@ti.com

drm/omap: dsi: drop virtual channel logic

This drops the virtual channel logic. Afterwards DSI clients
request their channel number and get the virtual channel with
the same number or -EBUSY if already in use.

The change here is not strictly speaking correct, as it combines the VC
(DSI's "configuration block") and virtual channel ID (the ID sent in the
DSI packets). But as we currently only support a single DSI command mode
panel, this works fine: we always use VC0, and VC ID 0.

This needs more work to support video mode panels, but that can be done
after moving to DRM bridge and panel model, after which we can do that
work with the proper APIs.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-9-tomi.valkeinen@ti.com

drm/omap: dsi: unexport specific data transfer functions

After converting all DSI drivers, unexport the specific transfer
functions.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-8-tomi.valkeinen@ti.com

drm/omap: dsi: add generic transfer function

This prepares the driver for becoming a mipi_dsi_host implementation,
which provides a generic transfer function instead of all kind of
different read/write functions. The implementation will become more
elegant after unexporting the specific functions in the following
patches.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-6-tomi.valkeinen@ti.com

drm/omap: constify write buffers

The write buffers are not modified, so they can be constant.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-5-tomi.valkeinen@ti.com

drm/omap: dsi: use MIPI_DSI_FMT_* instead of OMAP_DSS_DSI_FMT_*

This replaces OMAP specific enum for pixel format with
common implementation.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-4-tomi.valkeinen@ti.com

drm/omap: drop unused dsi.configure_pins

The panel-dsi-cm's ddata->pin_config is always NULL, so this
callback is never called. Instead the DSI encoder gets the pin
configuration directly from DT.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-3-tomi.valkeinen@ti.com

drm/omap: Fix runtime PM imbalance on error

pm_runtime_get_sync() increments the runtime PM usage counter
even when it returns an error code. However, users of its
direct wrappers in omapdrm assume that PM usage counter will
not change on error. Thus a pairing decrement is needed on
the error handling path for these wrappers to keep the counter
balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200822065743.13671-1-dinghao.liu@zju.edu.cn

drm/omap: dsi: Rework and remove a few unused variables

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/omapdrm/dss/dsi.c: In function ‘_dsi_print_reset_status’:
drivers/gpu/drm/omapdrm/dss/dsi.c:1131:6: warning: variable ‘l’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/omapdrm/dss/dsi.c: In function ‘dsi_update’:
drivers/gpu/drm/omapdrm/dss/dsi.c:3943:10: warning: variable ‘dh’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/omapdrm/dss/dsi.c:3943:6: warning: variable ‘dw’ set but not used [-Wunused-but-set-variable]

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105144517.1826692-9-lee.jones@linaro.org

drm/omap: force runtime PM suspend on system suspend

Use SET_LATE_SYSTEM_SLEEP_PM_OPS in DSS submodules to force runtime PM
suspend and resume.

We use suspend late version so that omapdrm's system suspend callback is
called first, as that will disable all the display outputs after which
it's safe to force DSS into suspend.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200618095153.611071-1-tomi.valkeinen@ti.com
Acked-by: Tony Lindgren <tony@atomide.com>
Fixes: cef766300353 ("drm/omap: Prepare DSS for probing without legacy platform data")
Cc: stable@vger.kernel.org # v5.7+
Tested-by: Tony Lindgren <tony@atomide.com>

drm/omap: Add infrastructure to support drm_bridge local to DSS outputs

In order to support drm_bridge-based pipeline, the internal HDMI
encoders will need to expose the EDID read operation through the
drm_bridge API, and thus to expose a drm_bridge instance corresponding
to the encoder. The HDMI encoders are however handled as omap_dss_device
instances, which conflicts with this requirement.

In order to move forward with the drm_bridge transition, add support for
creating drm_bridge instances local to DSS outputs. If a local bridge is
passed to the omapdss_device_init_output() function, it is used as the
first bridge in the chain, and the omap_dss_device.next_bridge field is
set to the next bridge for the use of the internal encoders' bridges.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-27-laurent.pinchart@ideasonboard.com

drm/omap: dss: Fix output next device lookup in DT

The DSS core looks up the next device connected to an output by
traversing the OF graph. It currently hardcodes the local port number to
0, which breaks any output with a different port number (SDI on OMAP3
and any DPI output but the first one). Fix this by repurposing the
currently unused of_ports bitmask in omap_dss_device with an of_port
output port number, and use it to traverse the OF graph.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-26-laurent.pinchart@ideasonboard.com

drm/omap: Remove set but not used variable 'tclk_trail'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/omapdrm/dss/dsi.c: In function dsi_proto_timings:
drivers/gpu/drm/omapdrm/dss/dsi.c:3562:46: warning: variable tclk_trail set but not used [-Wunused-but-set-variable]

It is not used since commit 9960aa7cb58c ("drm/omap:
move omapdss & displays under omapdrm")

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1570518949-47574-3-git-send-email-zhengbin13@huawei.com

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 503 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/omap: dsi: Fix PM for display blank with paired dss_pll calls

Currently dsi_display_init_dsi() calls dss_pll_enable() but it is not
paired with dss_pll_disable() in dsi_display_uninit_dsi(). This leaves
the DSS clocks enabled when the display is blanked wasting about extra
5mW of power while idle.

The clock that is left on by not calling dss_pll_disable() is
DSS_CLKCTRL bit 10 OPTFCLKEN_SYS_CLK that is the source clock for
DSI PLL.

We can fix this issue by by making the current dsi_pll_uninit() into
dsi_pll_disable(). This way we can just call dss_pll_disable() from
dsi_display_uninit_dsi() and the code becomes a bit easier to follow.

However, we need to also consider that DSI PLL can be muxed for DVI too
as pointed out by Tomi Valkeinen <tomi.valkeinen@ti.com>. In the DVI
case, we want to unconditionally disable the clocks. To get around this
issue, we separate out the DSI lane handling from dsi_pll_enable() and
dsi_pll_disable() as suggested by Tomi in an earlier experimental patch.

So we must only toggle the DSI regulator based on the vdds_dsi_enabled
flag from dsi_display_init_dsi() and dsi_display_uninit_dsi().

We need to make these two changes together to avoid breaking things
for DVI when fixing the DSI clock handling. And this all causes a
slight renumbering of the error path for dsi_display_init_dsi().

Suggested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: Use new DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags

The DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE and
DRM_BUS_FLAG_SYNC_(POS|NEG)EDGE flags are deprecated in favour of the
new DRM_BUS_FLAG_PIXDATA_(DRIVE|SAMPLE)_(POS|NEG)EDGE and
new DRM_BUS_FLAG_SYNC_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags. Replace them
through the code.

This effectively changes the value of the .sampling_edge bridge timings
field in the dumb-vga-dac driver. This is safe to do as no driver
consumes these values yet.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Merge omap_dss_device type and output_type fields

The omap_dss_device type and output_type fields differ mostly for
historical reasons. The output_type field is required for all devices
but the display at the end of the pipeline, and must be set to
OMAP_DISPLAY_TYPE_NONE for the latter. The type field is required for
all devices but the internal encoder, for which it is ignored.

The only reason why the output_type field must be set to
OMAP_DISPLAY_TYPE_NONE for the display at the end of the pipeline is to
identify omap_dss_device instances corresponding to displays. This is
not documented and confusing.

Clean the code by adding a new display field to the omap_dss_device
structure to identify displays, and merge the type and output_type
fields.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Factor out common init/cleanup code for output devices

All the internal encoders share common init and cleanup code. Factor it
out to separate functions.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Reverse direction of the DSS device enable/disable operations

The omapdrm and omapdss drivers are architectured based on display
pipelines made of multiple components handled from sink (display) to
source (DSS output). This is incompatible with the DRM bridge and panel
APIs that handle components from source to sink.

Reconcile the omapdrm and omapdss drivers with the DRM bridge and panel
model by reversing the direction of the DSS device .enable() and
.disable() operations. This completes the move to the DRM bridge model,
with the notable exception of the DSI pipelines that will require more
work.

We also adapt the omapdss shutdown handler dss_shutdown() to shut down
all active pipelines starting from the pipeline output device instead of
the display device.

As a consequence the for_each_dss_display() macro isn't used and can be
removed, and the omapdss_device_get_next() function underlying the macro
can be simplified to search for output devices only.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Remove connection checks from internal encoders .enable()

The internal encoders return an error from their .enable() handler when
their are not connected to a dss manager. As the flag used is set and
cleared in the connect and disconnect handlers, this effectively checks
whether the omap_dss_device is connected.

The .enable() handler is called from code paths that access the dss
devices chain from the display device, which is set to NULL when the
device isn't connected, making it impossible to access the device in
that case.

The safety check is thus not needed, remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: dsi: Hack-fix DSI bus flags

Since commit b4935e3a3cfa ("drm/omap: Store bus flags in the
omap_dss_device structure") video mode flags are managed by the omapdss
(and later omapdrm) core based on bus flags stored in omap_dss_device.
This works fine for all devices whose video modes are set by the omapdss
and omapdrm core, but breaks DSI operation as the DSI still uses legacy
code paths and sets the DISPC timings manually.

To fix the problem properly we should move the DSI encoder to the new
encoder model. This will however require a considerable amount of work.
Restore DSI operation by adding back video mode flags handling in the
DSI encoder driver as a hack in the meantime.

Fixes: b4935e3a3cfa ("drm/omap: Store bus flags in the omap_dss_device structure")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-5-laurent.pinchart@ideasonboard.com

drm/omap: dsi: Fix OF platform depopulate

Commit edb715dffdee ("drm/omap: dss: dsi: Move initialization code from
bind to probe") moved the of_platform_populate() call from dsi_bind() to
dsi_probe(), but failed to move the corresponding
of_platform_depopulate() from dsi_unbind() to dsi_remove(). This results
in OF child devices being potentially removed multiple times. Fix it by
placing the of_platform_depopulate() call where it belongs.

Fixes: edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-4-laurent.pinchart@ideasonboard.com

drm/omap: dsi: Fix crash in DSI debug dumps

Reading any of the DSI debugfs files results in a crash, as wrong
pointer is passed to the dump functions, and the dump functions use a
wrong pointer. This patch fixes DSI debug dumps.

Fixes: f3ed97f9ae7d ("drm/omap: dsi: Simplify debugfs implementation")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-3-laurent.pinchart@ideasonboard.com

drm/omap: populate DSI platform bus earlier

After the changes from 4.20 the DSI encoder tries to find the
attached panel before populating the DSI bus. If the panel is
not found -EPROBE_DEFER is returned, so the DSI bus is never
populated and the panel never added.

Fix this by populating the DSI bus before searching for the
video sink in dsi_init_output().

Fixes: 27d624527d992 ("drm/omap: dss: Acquire next dssdev at probe time")
Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121160916.22017-3-sebastian.reichel@collabora.com

drm/omap: dsi: Fix missing of_platform_depopulate()

We're missing a call to of_platform_depopulate() on errors for dsi.
Looks like dss is already doing this.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106152802.38599-1-tony@atomide.com

drm/omap: Move DISPC runtime PM handling to omapdrm

The internal encoders (DSI, HDMI4, HDMI5 and VENC) runtime PM handlers
attempt to manage the runtime PM state of the connected DISPC, based on
the rationale that the DISPC providing data to the encoders requires
ensuring that the display is active whenever the encoders are active.

While the DISPC provides data to the encoders, it doesn't as such
constitute a resource that encoders require in order to be taken out
of suspend, contrary to for instance a functional clock or a power
supply. Encoders registers can be accessed without the DISPC being
active, and while the encoders will not output any video stream without
being fed by the DISPC, the DISPC PM state doesn't influence the
encoders PM state.

For this reason the DISPC PM state is better managed from the omapdrm
driver, in the CRTC enable and disable operations. This allows the
encoders PM state to be handled separately from the DISPC, and in
particular at times when the DISPC may not be available (for instance at
probe due to the DSS probe being deferred, or at remove time du to the
DISPC being already removed).

Fixes: edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-5-laurent.pinchart@ideasonboard.com

drm/omap: dsi: Ensure the device is active during probe

The probe function performs hardware access to read the number of
supported data lanes from a configuration register and thus requires the
device to be active. Ensure this by surrounding the access with
dsi_runtime_get() and dsi_runtime_put() calls.

Fixes: edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-4-laurent.pinchart@ideasonboard.com

drm/omap: Store CRTC timings in .set_timings() operation

The video timings are stored in the CRTC structure by the
omap_crtc_dss_set_timings() function, called by dss_mgr_set_timings()
from the .enable() operation of the internal encoders. This instead
belongs to the .set_timings() code paths. Move the
omap_crtc_dss_set_timings() calls accordingly.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: dsi: Fixup video mode in .set_config() operation

The DSI encoder modifies the passed videomode to take the requirements
of the internal DISPC-DSI bus into account in the .enable_video_output()
operation. This should be performed in the .check_timings() operation
instead. There is however no .check_timings() operation as the DSI
encoder uses a custom API, so move it to the closest match which is the
.set_config() operation.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Store bus flags in the omap_dss_device structure

Source components in the display pipeline need to configure their output
signals polarities and clock driving edge based on the requirements of
the sink component.

Those requirements are currently shared across the whole pipeline in the
flags of a videomode structure, instead of being local to each bus. This
both prevents multiple buses from having different configurations (when
the hardware supports it), and makes it difficult to move from videomode
to drm_display_mode as the latter doesn't contain bus polarities and
clock edge flags.

Add a bus_flags field to the omap_dss_device structure and move the
DISPLAY_FLAGS_DE_(LOW|HIGH), DISPLAY_FLAGS_PIXDATA_(POS|NEG)EDGE and
DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE videomode flags to bus_flags in all
external encoders, connectors and panels. The videomode flags are still
used internally for internal encoders, this will be addressed in a
second step.

The related videomode flags in the default mode of the DVI connector can
simply be dropped, as they are always overridden by the TFP410 driver.
Note that this results in both the DISPLAY_FLAGS_SYNC_POSEDGE and
DISPLAY_FLAGS_SYNC_NEGEDGE flags being set, which is invalid, but only
the former is tested for when programming the DISPC, so the DVI
connector flags are effectively overridden by the TFP410 flags.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: dss: Remove the dss_mgr_(dis)connect() operations

The dss_mgr .connect() and .disconnect() are implemented as no-op in
omapdrm. The operations are unneeded, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Set dispc_channel_connect from DSS output connect handlers

The omap_dss_device.dispc_channel_connect field is used by DSS outputs
to fail the .enable() operation if they're not connected. Set the field
directly from the (dis)connect handlers of the DSS outputs instead of
going through the CRTC dss_mgr operations.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: dss: Merge two disconnection helpers

To simplify the pipeline disconnection handling merge the
omapdss_device_disconnect() and omapdss_output_unset_device() functions.
The device state check is now called for every device in the pipeline,
extending this sanity check coverage.

There is no need to return an error from omapdss_device_disconnect()
when the check fails, as omapdss_output_unset_device() used to do, given
that we can't prevent disconnection due to device unbinding (the return
value of omapdss_output_unset_device() is never checked in the current
code for that reason).

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: dss: Move display type validation to initialization time

The display type is validated when the display is connected to the DSS
output. We already have all the information we need for validation when
initializing the outputs. Move validation to output initialization to
simplify pipeline connection handling.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Reverse direction of DSS device (dis)connect operations

The omapdrm and omapdss drivers are architectured based on display
pipelines made of multiple components handled from sink (display) to
source (DSS output). This is incompatible with the DRM bridge and panel
APIs that handle components from source to sink.

To reconcile the omapdrm and omapdss drivers with the DRM bridge and
panel model, we need to reverse the direction of the DSS device
operations. Start with the connect and disconnect operations.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: dss: Get regulators at probe time

Regulators for the DPI, DSI, HDMI, SDI and VENC outputs are all looked
up when connecting the output omap_dss_device. There's no need to delay
regulator handling to that time, get the regulators at probe time.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: dss: Remove duplicated parameter to dss_mgr_(dis)connect()

The dss_mgr_connect() and dss_mgr_disconnect() functions take two
omap_dss_device pointers as parameters, which are always set to the same
value by all callers. Remove the duplicated pointer.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: dss: Acquire next dssdev at probe time

Look up the next dssdev at probe time based on device tree links for all
DSS outputs and encoders. This will be used to reverse the order of the
dssdev connect and disconnect call chains.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: dss: dsi: Move initialization code from bind to probe

There's no reason to delay initialization of most of the driver (such as
mapping memory I/O or enabling runtime PM) to the component bind
handler. Perform as much of the initialization as possible at probe
time, initializing at bind time only the parts that depends on the DSS.
The cleanup code is moved from unbind to remove in a similar way.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: dss: Cleanup error paths in output init functions

Rename the jump labels according to the cleanup they perform, not the
location they're accessed from, and move functions from error checks to
cleanup paths, and move reference handling to simplify cleanup.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: dss: Replace omap_dss_device port number with bitmask

The omap_dss_device port_num field stores the DT port number associated
with the device. The field is used in different ways depending on the
device type:

- For DPI outputs, the port number is used as an identifier of the DPI
instance

- For sources, the port number is used to look up the omap_dss_device by
DT port node

As omap_dss_device instances are only looked up as sources by sinks,
setting the field to the number of the source port works for both use
cases.

However, to enable looking up sinks, we need to record all the ports
associated with an omap_dss_device. Do so by turning the port_num field
into an of_ports bitmask. For DPI outputs the port number is
additionally stored in the dpi_data structure as the output ID.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: dss: Remove output devices list

The output devices list isn't used anymore, all output devices are
accessed through the global devices list. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Move DSI debugfs clocks dump to dsi%u_clks files

The DSI clocks are dumped in the DSS-level debugfs clocks file. This
complicates the implementation as the DSI private data has to be looked
up through the outputs list. Simplify it by creating two debugfs files,
dsi1_clks and dsi2_clks, to dump the DSI clocks.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: dsi: Simplify debugfs implementation

The DSI debugfs regs and irqs show handlers received a pointer to the
DSI private data. There's no need to look it up from the list of DSS
outputs. Use the pointer directly, this allows simplifying the
implementation of the handlers.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: dss: Move src and dst check and set to connection handlers

The encoders duplicate the same omap_dss_device src and dst fields set
and checks in their connect and disconnect handlers. Move the code to
the connect and disconnect wrappers.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: dss: Move common device operations to common structure

The various types of omapdss_*_ops structures define multiple operations
that are not specific to a bus type. To simplify the code and remove
dependencies on specific bus types move those operations to a common
structure. Operations that are specific to a bus type are kept in the
specialized ops structures.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: fix email address

Change tomi.valkeinen@nokia.com to tomi.valkeinen@ti.com.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: omapdrm: dispc: Pass DISPC pointer to remaining dispc API functions

This removes the need to access the global DISPC private data in those
functions (both for the current accesses and the future ones that will
be introduced when allocating the DISPC private data dynamically).

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

drm: omapdrm: dispc: Pass DISPC pointer to dispc_ops operations

This removes the need to access the global DISPC private data in those
functions (both for the current accesses and the future ones that will
be introduced when allocating the DISPC private data dynamically).

In order to allow the omapdrm side to call the dispc_ops with a DISPC
pointer, we also introduce a new function dss_get_dispc() to retrieve
the DISPC corresponding to the DSS.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

drm: omapdrm: dss: Pass omap_dss_device pointer to dss_mgr_*() functions

The dss_mgr_*() functions take a channel argument to identify the
channel they operate on. This prevents the functions from accessing
driver data structures without resorting to global variables. In an
effort to remove global variables, pass the omap_dss_device pointer
associated with the channel instead. This will be used to look up the
omap_drm_private data structure to pass to the dss_mgr_ops.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

drm: omapdrm: dsi: Don't pass channel to dispc init/uninit functions

The dsi_display_init_dispc() and dsi_display_uninit_dispc() functions
take a channel argument that is reduntant as it is always identical to
the dsi->output.dispc_channel. Remove the argument and use the field
directly in the functions to avoid misuse.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

drm: omapdrm: dsi: Store the struct device pointer in struct dsi_data

The dsi_data structure stores a pointer to a struct platform_device. The
driver only uses the dev member of the platform device structure. Store
the struct device pointer instead and use it directly.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

drm: omapdrm: dsi: Use dev pointer directly in dsi_bind() function

The dsi_bind() function receives a pointer to a struct device that it
casts to a struct platform_device, only to use the platform device's dev
field through the code. Use the dev pointer directly.

While at it rename the struct platform_device pointer dsidev to pdev to
make it more explicit.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

drm: omapdrm: dsi: Combine two commonly used inline functions

The dsi_get_dsidrv_data() and dsi_get_dsidev_from_dssdev() inline
functions convert a struct omap_dss_device pointer to the corresponding
struct platform_device, and a struct platform_device pointer to the
corresponding struct dsi_data. They are nearly always called together
without any use of the intermediate platform_device, so combine them
into a single function.

In the three locations where only dsi_get_dsidrv_data() is used, call
dev_get_drvdata() directly.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

drm: omapdrm: dsi: Pass the dsi_data pointer to internal functions

Internal dsi functions take a pointer to the DSI platform_device and
then cast it to a dsi_data pointer. That's pointless as the caller
already has the dsi_data pointer. Pass it directly instead of the
platform_device pointer.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

drm: omapdrm: dss: Store the debugfs root directory in struct dss_device

As part of an effort to remove the usage of global variables in the
driver, store the debugfs root directory in the dss_device structure
instead of a global variable.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

drm: omapdrm: dss: Store the registered plls array in struct dss_device

As part of an effort to remove the usage of global variables in the
driver, store the registered plls array in the dss_device structure
instead of a global variable.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

drm: omapdrm: dss: Support passing private data to debugfs show handlers

To simplify implementation of debugfs seq_file show handlers, the driver
passes the pointer to the show function through the debugfs_create_file
data pointer. This prevents using the pointer to pass driver private
data to the show handler, and requires all handlers to use global
variables to access private data.

To prepare for the removal of global private data in the driver, rework
the debugfs infrastructure to allow passing a private data pointer to
show handlers.

The price to pay is explicit removal of debugfs files to free the
internally allocated memory. This is desirable anyway as debugfs entries
should be removed when a component driver is unbound, otherwise crashes
will occur due to access to freed memory when the components will be
dynamically allocated instead of stored in global variables.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

drm: omapdrm: dss: Pass DSS pointer to dss_get_*_clk_source()

This removes the need to access the global DSS private data in those
functions (both for the current accesses and the future ones that will
be introduced when allocating the DSS device dynamically).

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

drm: omapdrm: dss: Pass DSS pointer to dss_ops operations

This removes the need to access the global DSS private data in those
functions (both for the current accesses and the future ones that will
be introduced when allocating the DSS device dynamically).

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

drm: omapdrm: dss: Pass DSS private structure to runtime PM functions

To prepare for the removal of the global variable storing DSS private
data, pass its pointer to the dss_runtime_{get,put}() functions.

As this requires getting hold of the dss_device structure in the
callers, we add a new dss_get_device() function to retrieve it. The
function currently returns a pointer to the global data structure, and
will later be updated to get the pointer from device driver data when
the DSS private structure will be allocated dynamically.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

drm: omapdrm: dsi: Make wait_for_bit_change() return a status

The wait_for_bit_change() function returns the value of the bit it
polls. This requires the caller to compare the return value to the
expected bit value. As all the existing callers need is to check whether
the bit has reached the expected value, it's easier to return a boolean
status from the function.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: omapdrm: Use unsigned int type

The kernel favours 'unsigned int' over plain 'unsigned'. Replace all
occurences of the latter by the former. This avoid lots of checkpatch
complaints in patches that touch lines where a plain 'unsigned' is used.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: omapdrm: Simplify platform registration

Currently, calls into each file are used to register the various
platform drivers. Change this to a table of pointers to platform_driver
structs to allow using platform_register_drivers.

Signed-off-by: Andrew F. Davis <afd@ti.com>

drm: omapdrm: Remove filename from header and fix copyright tag

Having the filename in the header serves little purpose and is
often wrong after renames as it is here in several places, just
drop it from all omapdrm files.

While we are here unify the copyright tags to the TI recommended style.

Signed-off-by: Andrew F. Davis <afd@ti.com>

treewide: setup_timer() -> timer_setup()

This converts all remaining cases of the old setup_timer() API into using
timer_setup(), where the callback argument is the structure already
holding the struct timer_list. These should have no behavioral changes,
since they just change which pointer is passed into the callback with
the same available pointers after conversion. It handles the following
examples, in addition to some other variations.

Casting from unsigned long:

void my_callback(unsigned long data)
{
struct something *ptr = (struct something *)data;
...
}
...
setup_timer(&ptr->my_timer, my_callback, ptr);

and forced object casts:

void my_callback(struct something *ptr)
{
...
}
...
setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr);

become:

void my_callback(struct timer_list *t)
{
struct something *ptr = from_timer(ptr, t, my_timer);
...
}
...
timer_setup(&ptr->my_timer, my_callback, 0);

Direct function assignments:

void my_callback(unsigned long data)
{
struct something *ptr = (struct something *)data;
...
}
...
ptr->my_timer.function = my_callback;

have a temporary cast added, along with converting the args:

void my_callback(struct timer_list *t)
{
struct something *ptr = from_timer(ptr, t, my_timer);
...
}
...
ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback;

And finally, callbacks without a data assignment:

void my_callback(unsigned long data)
{
...
}
...
setup_timer(&ptr->my_timer, my_callback, 0);

have their argument renamed to verify they're unused during conversion:

void my_callback(struct timer_list *unused)
{
...
}
...
timer_setup(&ptr->my_timer, my_callback, 0);

The conversion is done with the following Coccinelle script:

spatch --very-quiet --all-includes --include-headers \
-I ./arch/x86/include -I ./arch/x86/include/generated \
-I ./include -I ./arch/x86/include/uapi \
-I ./arch/x86/include/generated/uapi -I ./include/uapi \
-I ./include/generated/uapi --include ./include/linux/kconfig.h \
--dir . \
--cocci-file ~/src/data/timer_setup.cocci

@fix_address_of@
expression e;
@@

setup_timer(
-&(e)
+&e
, ...)

// Update any raw setup_timer() usages that have a NULL callback, but
// would otherwise match change_timer_function_usage, since the latter
// will update all function assignments done in the face of a NULL
// function initialization in setup_timer().
@change_timer_function_usage_NULL@
expression _E;
identifier _timer;
type _cast_data;
@@

(
-setup_timer(&_E->_timer, NULL, _E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E->_timer, NULL, (_cast_data)_E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, &_E);
+timer_setup(&_E._timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, (_cast_data)&_E);
+timer_setup(&_E._timer, NULL, 0);
)

@change_timer_function_usage@
expression _E;
identifier _timer;
struct timer_list _stl;
identifier _callback;
type _cast_func, _cast_data;
@@

(
-setup_timer(&_E->_timer, _callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
_E->_timer@_stl.function = _callback;
|
_E->_timer@_stl.function = &_callback;
|
_E->_timer@_stl.function = (_cast_func)_callback;
|
_E->_timer@_stl.function = (_cast_func)&_callback;
|
_E._timer@_stl.function = _callback;
|
_E._timer@_stl.function = &_callback;
|
_E._timer@_stl.function = (_cast_func)_callback;
|
_E._timer@_stl.function = (_cast_func)&_callback;
)

// callback(unsigned long arg)
@change_callback_handle_cast
depends on change_timer_function_usage@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
identifier _handle;
@@

void _callback(
-_origtype _origarg
+struct timer_list *t
)
{
(
... when != _origarg
_handletype *_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
... when != _origarg
|
... when != _origarg
_handletype *_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
... when != _origarg
|
... when != _origarg
_handletype *_handle;
... when != _handle
_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
... when != _origarg
|
... when != _origarg
_handletype *_handle;
... when != _handle
_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
... when != _origarg
)
}

// callback(unsigned long arg) without existing variable
@change_callback_handle_cast_no_arg
depends on change_timer_function_usage &&
!change_callback_handle_cast@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
@@

void _callback(
-_origtype _origarg
+struct timer_list *t
)
{
+ _handletype *_origarg = from_timer(_origarg, t, _timer);
+
... when != _origarg
- (_handletype *)_origarg
+ _origarg
... when != _origarg
}

// Avoid already converted callbacks.
@match_callback_converted
depends on change_timer_function_usage &&
!change_callback_handle_cast &&
!change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier t;
@@

void _callback(struct timer_list *t)
{ ... }

// callback(struct something *handle)
@change_callback_handle_arg
depends on change_timer_function_usage &&
!match_callback_converted &&
!change_callback_handle_cast &&
!change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
@@

void _callback(
-_handletype *_handle
+struct timer_list *t
)
{
+ _handletype *_handle = from_timer(_handle, t, _timer);
...
}

// If change_callback_handle_arg ran on an empty function, remove
// the added handler.
@unchange_callback_handle_arg
depends on change_timer_function_usage &&
change_callback_handle_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
identifier t;
@@

void _callback(struct timer_list *t)
{
- _handletype *_handle = from_timer(_handle, t, _timer);
}

// We only want to refactor the setup_timer() data argument if we've found
// the matching callback. This undoes changes in change_timer_function_usage.
@unchange_timer_function_usage
depends on change_timer_function_usage &&
!change_callback_handle_cast &&
!change_callback_handle_cast_no_arg &&
!change_callback_handle_arg@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type change_timer_function_usage._cast_data;
@@

(
-timer_setup(&_E->_timer, _callback, 0);
+setup_timer(&_E->_timer, _callback, (_cast_data)_E);
|
-timer_setup(&_E._timer, _callback, 0);
+setup_timer(&_E._timer, _callback, (_cast_data)&_E);
)

// If we fixed a callback from a .function assignment, fix the
// assignment cast now.
@change_timer_function_assignment
depends on change_timer_function_usage &&
(change_callback_handle_cast ||
change_callback_handle_cast_no_arg ||
change_callback_handle_arg)@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_func;
typedef TIMER_FUNC_TYPE;
@@

(
_E->_timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
;
|
_E->_timer.function =
-&_callback
+(TIMER_FUNC_TYPE)_callback
;
|
_E->_timer.function =
-(_cast_func)_callback;
+(TIMER_FUNC_TYPE)_callback
;
|
_E->_timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
;
|
_E._timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
;
|
_E._timer.function =
-&_callback;
+(TIMER_FUNC_TYPE)_callback
;
|
_E._timer.function =
-(_cast_func)_callback
+(TIMER_FUNC_TYPE)_callback
;
|
_E._timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
;
)

// Sometimes timer functions are called directly. Replace matched args.
@change_timer_function_calls
depends on change_timer_function_usage &&
(change_callback_handle_cast ||
change_callback_handle_cast_no_arg ||
change_callback_handle_arg)@
expression _E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_data;
@@

_callback(
(
-(_cast_data)_E
+&_E->_timer
|
-(_cast_data)&_E
+&_E._timer
|
-_E
+&_E->_timer
)
)

// If a timer has been configured without a data argument, it can be
// converted without regard to the callback argument, since it is unused.
@match_timer_function_unused_data@
expression _E;
identifier _timer;
identifier _callback;
@@

(
-setup_timer(&_E->_timer, _callback, 0);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0L);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0UL);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0L);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0UL);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0L);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0UL);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0L);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0UL);
+timer_setup(_timer, _callback, 0);
)

@change_callback_unused_data
depends on match_timer_function_unused_data@
identifier match_timer_function_unused_data._callback;
type _origtype;
identifier _origarg;
@@

void _callback(
-_origtype _origarg
+struct timer_list *unused
)
{
... when != _origarg
}

Signed-off-by: Kees Cook <keescook@chromium.org>

treewide: init_timer() -> setup_timer()

This mechanically converts all remaining cases of ancient open-coded timer
setup with the old setup_timer() API, which is the first step in timer
conversions. This has no behavioral changes, since it ultimately just
changes the order of assignment to fields of struct timer_list when
finding variations of:

init_timer(&t);
f.function = timer_callback;
t.data = timer_callback_arg;

to be converted into:

setup_timer(&t, timer_callback, timer_callback_arg);

The conversion is done with the following Coccinelle script, which
is an improved version of scripts/cocci/api/setup_timer.cocci, in the
following ways:
- assignments-before-init_timer() cases
- limit the .data case removal to the specific struct timer_list instance
- handling calls by dereference (timer->field vs timer.field)

spatch --very-quiet --all-includes --include-headers \
-I ./arch/x86/include -I ./arch/x86/include/generated \
-I ./include -I ./arch/x86/include/uapi \
-I ./arch/x86/include/generated/uapi -I ./include/uapi \
-I ./include/generated/uapi --include ./include/linux/kconfig.h \
--dir . \
--cocci-file ~/src/data/setup_timer.cocci

@fix_address_of@
expression e;
@@

init_timer(
-&(e)
+&e
, ...)

// Match the common cases first to avoid Coccinelle parsing loops with
// "... when" clauses.

@match_immediate_function_data_after_init_timer@
expression e, func, da;
@@

-init_timer
+setup_timer
( \(&e\|e\)
+, func, da
);
(
-\(e.function\|e->function\) = func;
-\(e.data\|e->data\) = da;
|
-\(e.data\|e->data\) = da;
-\(e.function\|e->function\) = func;
)

@match_immediate_function_data_before_init_timer@
expression e, func, da;
@@

(
-\(e.function\|e->function\) = func;
-\(e.data\|e->data\) = da;
|
-\(e.data\|e->data\) = da;
-\(e.function\|e->function\) = func;
)
-init_timer
+setup_timer
( \(&e\|e\)
+, func, da
);

@match_function_and_data_after_init_timer@
expression e, e2, e3, e4, e5, func, da;
@@

-init_timer
+setup_timer
( \(&e\|e\)
+, func, da
);
... when != func = e2
when != da = e3
(
-e.function = func;
... when != da = e4
-e.data = da;
|
-e->function = func;
... when != da = e4
-e->data = da;
|
-e.data = da;
... when != func = e5
-e.function = func;
|
-e->data = da;
... when != func = e5
-e->function = func;
)

@match_function_and_data_before_init_timer@
expression e, e2, e3, e4, e5, func, da;
@@
(
-e.function = func;
... when != da = e4
-e.data = da;
|
-e->function = func;
... when != da = e4
-e->data = da;
|
-e.data = da;
... when != func = e5
-e.function = func;
|
-e->data = da;
... when != func = e5
-e->function = func;
)
... when != func = e2
when != da = e3
-init_timer
+setup_timer
( \(&e\|e\)
+, func, da
);

@r1 exists@
expression t;
identifier f;
position p;
@@

f(...) { ... when any
init_timer@p(\(&t\|t\))
... when any
}

@r2 exists@
expression r1.t;
identifier g != r1.f;
expression e8;
@@

g(...) { ... when any
\(t.data\|t->data\) = e8
... when any
}

// It is dangerous to use setup_timer if data field is initialized
// in another function.
@script:python depends on r2@
p << r1.p;
@@

cocci.include_match(False)

@r3@
expression r1.t, func, e7;
position r1.p;
@@

(
-init_timer@p(&t);
+setup_timer(&t, func, 0UL);
... when != func = e7
-t.function = func;
|
-t.function = func;
... when != func = e7
-init_timer@p(&t);
+setup_timer(&t, func, 0UL);
|
-init_timer@p(t);
+setup_timer(t, func, 0UL);
... when != func = e7
-t->function = func;
|
-t->function = func;
... when != func = e7
-init_timer@p(t);
+setup_timer(t, func, 0UL);
)

Signed-off-by: Kees Cook <keescook@chromium.org>

drm/omap: add OMAP5 DSIPHY lane-enable support

We are missing OMAP5 DSIPHY lane-enable support, which has prevented
OMAP5 DSI working in mainline. This patch adds the lane-enable similarly
to the recently added OMAP4 version.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm/omap: use regmap_update_bit() when muxing DSI pads

Use regmap_update_bits instead of regmap_read/write, which simplifies
the code.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: omapdrm: Remove dss_features.h

The header file only contains four macros, two of which are never used.
Move the other two to dss.h and remove dss_features.h.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: omapdrm: Move FEAT_PARAM_DSI* features to dsi driver

The FEAT_PARAM_DSI* features are specific to the DSI, move them from the
omap_dss_features structure to the dsi driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: omapdrm: Move FEAT_DSI_* features to dsi driver

The FEAT_DSI_* features are specific to the DSI, move them from the
omap_dss_features structure to the dsi driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: omapdrm: dsi: Handle pin muxing internally

Don't rely on callback functions provided by the platform, but access
the syscon internally to mux the DSI pins.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: omapdrm: dsi: Store DSI model and PLL hardware data in OF data

The DSI PLL hardware data and DSS channels are selected based on the
OMAP SoC model. There's no need for fine-grained model information, as
the driver only needs to differentiate between OMAP3, OMAP4 and OMAP5.
As this can be done through the DSI compatible string, store the
corresponding information in OF match data instead to avoid accessing
the OMAP SoC model.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: omapdrm: Drop support for non-DT devices

All OMAP platforms use DT nowadays, drop support for non-DT devices.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: omapdrm: Remove duplicate error messages when mapping memory

The devm_ioremap_resource() call can handle being given a NULL resource,
and prints an error message when mapping fails. Switch the remaining
devm_ioremap() calls to devm_ioremap_resource() and remove all
extraneous resource NULL checks and error messages printed manually by
the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: omap: use common OF graph helpers

The OMAP driver has its own OF graph helpers that are similar to the
common helpers. This commit replaces most of the calls with the common
helpers. There's still a couple of custom helpers left, but the driver
needs more extensive changes to get rid of them.

In dss_init_ports, we invert the loop, looping through the known ports
and matching them to DT nodes rather than looping thru DT nodes and
matching them to the ports.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm/omap: display: don't use dsi_get_pixel_size()

display.c uses dsi_get_pixel_size() which is implemented in the DSI
driver, and we won't have that in the omapdss-base module, to which we
want to move display.c

This patch changes display.c not to use dsi_get_pixel_size(). The call
can be replaced with a simple check for OMAP_DSS_DSI_FMT_RGB565.

We can also make dsi_get_pixel_size() static as it's no longer used
outside dsi.c.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

gpu: drm: drivers: Convert printk(KERN_<LEVEL> to pr_<level>

Use a more common logging style.

Miscellanea:

o Coalesce formats and realign arguments
o Neaten a few macros now using pr_<level>

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Sinclair Yeh <syeh@vmware.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/76355db47b31668bb64d996865ceee53bd66b11f.1488285953.git.joe@perches.com

drm/omap: dsi: fix compile errors when enabling debug prints

dsi.c compile fails if PRINT_VERBOSE_VM_TIMINGS is enabled, as the
video timings were not converted in the code behind that ifdef. Note
that PRINT_VERBOSE_VM_TIMINGS has to be enabled by hand, there's no
config option for it.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[tomi.valkeinen@ti.com: fixed the patch description]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Use consistent name for struct videomode

Use 'vm' to refer to a struct videomode instead of 'p', 't', 'timings' or
something else.

The code will be easier to follow if we use consistent names.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Replace struct omap_video_timings with videomode

omap_video_timings can be replaced with the generic videomode in omapdrm
and the omap_video_timings can be removed.

This patch will replace the omap_video_timings with videomode.
With the change we no longer need the functions to convert to/from
videomode and drm_display_mode to omap_video_timings, these can be removed
as well.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: omap_display_timings: Use display_flags for sync edge

In preparation to move the stack to use the generic videmode struct for
display timing information use display_flags for sync edge.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: omap_display_timings: Use display_flags for pixel data edge

In preparation to move the stack to use the generic videmode struct for
display timing information use display_flags for pixel data edge.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: omap_display_timings: Use display_flags for DE level

In preparation to move the stack to use the generic videmode struct for
display timing information use display_flags for DE level.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: omap_display_timings: Use display_flags for h/vsync level

In preparation to move the stack to use the generic videmode struct for
display timing information use display_flags for h/vsync level.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: omap_display_timings: Use display_flags for interlace mode

Remove the interlace member and add display_flags to omap_video_timings to
configure the interlace mode.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: omap_display_timings: rename vbp to vback_porch

In preparation to move the stack to use the generic videmode struct for
display timing information rename the vbp member to vback_porch.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: omap_display_timings: rename vfp to vfront_porch

In preparation to move the stack to use the generic videmode struct for
display timing information rename the vfp member to vfront_porch.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: omap_display_timings: rename vsw to vsync_len

In preparation to move the stack to use the generic videmode struct for
display timing information rename the vsw member to vsync_len.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: omap_display_timings: rename hbp to hback_porch

In preparation to move the stack to use the generic videmode struct for
display timing information rename the hbp member to hback_porch.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: omap_display_timings: rename hfp to hfront_porch

In preparation to move the stack to use the generic videmode struct for
display timing information rename the hfp member to hfront_porch.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: omap_display_timings: rename hsw to hsync_len

In preparation to move the stack to use the generic videmode struct for
display timing information rename the hsw member to hsync_len.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: omap_display_timings: rename y_res to vactive

In preparation to move the stack to use the generic videmode struct for
display timing information rename the y_res member to vactive.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: omap_display_timings: rename x_res to hactive

In preparation to move the stack to use the generic videmode struct for
display timing information rename the x_res member to hactive.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: fix return value check in dsi_bind()

Fix the retrn value check which testing the wrong variable
in dsi_bind().

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: fix unused variable warning in dsi & hdmi

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/omap: Do not include video/omapdss.h directly in drivers

All drivers to include the omapdrm/dss/omapdss.h header file. This header
includes the <video/omapdss.h>

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

drm/omap: Remove regulator API abuse

regulator_can_change_voltage() is deprecated and it's use is not necessary
as commit:
6a0028b3dd67b regulator: Deprecate regulator_can_change_voltage()
describers it clearly.

Also, regulator_set_voltage() is misused in the driver, as it is
supposed to be used only in cases where the regulator voltage needs to
be changed dynamically at runtime. In DSS's case, we always want a fixed
voltage, set in the .dts files.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: rename PLL calc functions

Add a "_a" postfix to the type A PLL calc functions, to differentiate
them from the type B PLL calculations which we will add shortly.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: add field for PLL type

DSS uses two types of PLLs, type A (DSI & Video) and type B (HDMI). The
two types behave slightly differently, but we don't have the type of the
PLL available anywhere for the driver.

This patch adds an enum for the PLL type and a field in the PLL's HW
data to store it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: rename dss_clk_source enums

The names of the enum dss_clk_source's values are legacy names, only
correct for OMAP3 DSS. Rename the names to more generic ones.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: rename dss_get_generic_clk_source_name()

Now that there is no "non-generic" version of the function to get the
clock source name, lets rename dss_get_generic_clk_source_name() to
dss_get_clk_source_name().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: remove dss_feat_get_clk_source_name()

We have two functions to return a name for clock sources for debugging
purposes: dss_feat_get_clk_source_name() and
dss_get_generic_clk_source_name().

The former is supposed to return a DSS IP version specific name for the
clock source, and the latter is supposed to return a more generic name.

All this seems a bit pointless, so let's remove the former one.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: rename omap_dss_clk_source

'enum omap_dss_clk_source' is internal to dss. Let's rename it to
'dss_clk_source' match our naming convention.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: DSI: remove uses of omap_overlay_manager

We are removing the uses of 'struct omap_overlay_manager'. This patch
changes DSI driver to use 'omap_channel' instead.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: remove extra manager checks on disconnect

The DSS output drivers check 'dssdev->manager' in disconnect()
functions. This check is not needed as the manager must always be set if
the output device was connected. Remove the check.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: convert dss_mgr_unregister_framedone_handler to accept omap_channel

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_unregister_framedone_handler() to accept 'enum
omap_channel' instead of 'struct omap_overlay_manager'.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: convert dss_mgr_register_framedone_handler to accept omap_channel

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_register_framedone_handler() to accept 'enum
omap_channel' instead of 'struct omap_overlay_manager'.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: convert dss_mgr_start_update to accept omap_channel

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_start_update() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: convert dss_mgr_disable to accept omap_channel

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_disable() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: convert dss_mgr_enable to accept omap_channel

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_enable() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: convert dss_mgr_set_lcd_config to accept omap_channel

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_set_lcd_config() to accept 'enum omap_channel' instead
of 'struct omap_overlay_manager'.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: convert dss_mgr_set_timings to accept omap_channel

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_set_timings() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: convert dss_mgr_disconnect to accept omap_channel

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_disconnect() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: convert dss_mgr_connect to accept omap_channel

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_connect() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: use dispc_channel_connected in output drivers

Use 'out->dispc_channel_connected' to check if the device is connected
to an overlay manager or not, instead of using 'out->manager'.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: move omapdss & displays under omapdrm

Now that omapfb has its own copy of omapdss and display drivers, we can
move omapdss and display drivers which omapdrm uses to omapdrm's
directory.

We also need to change the main drm Makefile so that omapdrm directory
is always entered, because omapdss has a file that can't be built as a
module.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>