drm/msm/dsi: remove msm_dsi::encoder

There is no need anymore to stop the drm_encoder instance in struct
msm_dsi. Remove corresponding field.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/561697/
Link: https://lore.kernel.org/r/20231009205727.2781802-5-dmitry.baryshkov@linaro.org

drm/msm/dsi: stop calling set_split_display

Since the commit 8b03ad30e314 ("drm/msm/dsi: Use one connector for dual
DSI mode"), the second DSI host in the bonded pair will not be
associated with the encoder and will not get the bridges, thus making
condition in msm_dsi_manager_set_split_display() always false.

Technically that change broke bonded DSI support in the MDP5 driver. But
since nobody complained in the last 5.5 years, it seems that nobody
cares enough.

Drop the msm_dsi_manager_set_split_display() completely and stop calling
the set_split_display() KMS callback. Also remove the
msm_dsi::external_bridge field which was only used by the mentioned
function.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/561695/
Link: https://lore.kernel.org/r/20231009205727.2781802-4-dmitry.baryshkov@linaro.org

drm/msm/dsi: drop msm_dsi_device_connected() function

Since the commit 8f59ee9a570c ("drm/msm/dsi: Adjust probe order") the
DSI hosts are not bound through the component framework if the DSI
driver wasn't attached to the DSI device connected to this host.

Afterwards, if there is no bridge (including the panel bridge) created
for the DSI device then devm_drm_of_get_bridge() will return an error,
also making msm_dsi_manager_ext_bridge_init() and thus DSI modesetting
init fail.

This way there can be no 'unconnected' MSM DSI bridges. Remove the
msm_dsi_device_connected() function.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/561692/
Link: https://lore.kernel.org/r/20231009205727.2781802-3-dmitry.baryshkov@linaro.org

drm/msm/dsi: do not store internal bridge pointer

Since the driver was switched to devm_drm_bridge_add(), there is no need
anymore to store the created bridge instance in struct msm_dsi. Drop
this field and pass data directly.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/561693/
Link: https://lore.kernel.org/r/20231009205727.2781802-2-dmitry.baryshkov@linaro.org

drm/msm/dsi: use correct lifetime device for devm_drm_bridge_add

The lifetime of the created drm_bridge is attached to the drm_device
rather than the DSI's platform_device. Use correct lifetime for
devm_drm_bridge_add() call.

Fixes: 5f403fd7d5c2 ("drm/msm/dsi: switch to devm_drm_bridge_add()")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/562200/
Link: https://lore.kernel.org/r/20231011214705.375738-2-dmitry.baryshkov@linaro.org

drm/msm/dsi: switch to devm_drm_bridge_add()

Make MSM DSI driver use devm_drm_bridge_add() instead of plain
drm_bridge_add(). As the driver doesn't require any additional cleanup,
stop adding created bridge to the priv->bridges array.

Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/561636/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: More properly handle errors in regards to dsi_mgr_bridge_power_on()

In commit 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset
time") the error handling with regards to dsi_mgr_bridge_power_on()
got a bit worse. Specifically if we failed to power the bridge on then
nothing would really notice. The modeset function couldn't return an
error and thus we'd blindly go forward and try to do the pre-enable.

In commit ec7981e6c614 ("drm/msm/dsi: don't powerup at modeset time
for parade-ps8640") we added a special case to move the powerup back
to pre-enable time for ps8640. When we did that, we didn't try to
recover the old/better error handling just for ps8640.

In the patch ("drm/msm/dsi: Stop unconditionally powering up DSI hosts
at modeset") we've now moved the powering up back to exclusively being
during pre-enable. That means we can add the better error handling
back in, so let's do it. To do so we'll add a new function
dsi_mgr_bridge_power_off() that's matches how errors were handled
prior to commit 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to
modeset time").

NOTE: Now that we have dsi_mgr_bridge_power_off(), it feels as if we
should be calling it in dsi_mgr_bridge_post_disable(). That would make
some sense, but doing so would change the current behavior and thus
should be a separate patch. Specifically:
* dsi_mgr_bridge_post_disable() always calls dsi_mgr_phy_disable()
even in the slave-DSI case of bonded DSI. We'd need to add special
handling for this if it's truly needed.
* dsi_mgr_bridge_post_disable() calls msm_dsi_phy_pll_save_state()
midway through the poweroff.
* dsi_mgr_bridge_post_disable() has a different order of some of the
poweroffs / IRQ disables.
For now we'll leave dsi_mgr_bridge_post_disable() alone.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/521059/
Link: https://lore.kernel.org/r/20230131141756.RFT.v2.3.I3c87b53c4ab61a7d5e05f601a4eb44c7e3809a01@changeid
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Stop unconditionally powering up DSI hosts at modeset

In commit 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset
time"), we moved powering up DSI hosts to modeset time. This wasn't
because it was an elegant design, but there were no better options.

That commit actually ended up breaking ps8640, and thus was born
commit ec7981e6c614 ("drm/msm/dsi: don't powerup at modeset time for
parade-ps8640") as a temporary hack to un-break ps8640 by moving it to
the old way of doing things. It turns out that ps8640 _really_ doesn't
like its pre_enable() function to be called after
dsi_mgr_bridge_power_on(). Specifically (from experimentation, not
because I have any inside knowledge), it looks like the assertion of
"RST#" in the ps8640 runtime resume handler seems like it's not
allowed to happen after dsi_mgr_bridge_power_on()

Recently, Dave Stevenson's series landed allowing bridges some control
over pre_enable ordering. The meaty commit for our purposes is
commit 4fb912e5e190 ("drm/bridge: Introduce pre_enable_prev_first to
alter bridge init order"). As documented by that series, if a bridge
doesn't set "pre_enable_prev_first" then we should use the old ordering.

Now that we have the commit ("drm/bridge: tc358762: Set
pre_enable_prev_first") we can go back to the old ordering, which also
allows us to remove the ps8640 special case.

One last note is that even without reverting commit 7d8e9a90509f
("drm/msm/dsi: move DSI host powerup to modeset time"), if you _just_
revert the ps8640 special case and try it out then it doesn't seem to
fail anymore. I spent time bisecting / debugging this and it turns out
to be mostly luck, so we still want this patch to make sure it's
solid. Specifically the reason it sorta works these days is because
we implemented wait_hpd_asserted() in ps8640 now, plus the magic of
"pm_runtime" autosuspend. The fact that we have wait_hpd_asserted()
implemented means that we actually power the bridge chip up just a wee
bit earlier and then the bridge happens to stay on because of
autosuspend and thus ends up powered before dsi_mgr_bridge_power_on().

Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/521058/
Link: https://lore.kernel.org/r/20230131141756.RFT.v2.2.I4cfeab9d0e07e98ead23dd0736ab4461e6c69002@changeid
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: properly handle the case of empty OPP table in dsi_mgr_bridge_mode_valid

It was left unnoticed during the review that even if there is no OPP
table in device tree, one will be created by a call to the function
devm_pm_opp_set_clkname(). This leads to dsi_mgr_bridge_mode_valid()
rejecting all modes if DT contains no OPP table for the DSI host.

Rework dsi_mgr_bridge_mode_valid() to handle this case by actually
checking that the table is populated with frequency entries before
returning an error.

Fixes: 8328041b8c82 ("drm/msm/dsi: implement opp table based check for dsi_mgr_bridge_mode_valid()")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/520076/
Link: https://lore.kernel.org/r/20230124203600.3488766-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: implement opp table based check for dsi_mgr_bridge_mode_valid()

Currently there is no protection against a user trying to set
an unsupported mode on DSI. Implement a check based on the opp
table whether the byte clock for the mode can be supported by
validating whether an opp table entry exists.

For devices which have not added opp table support yet, skip
this check otherwise it will break bootup on those devices.

changes in v3:
- make the comment shorter
- handle all errors except ENODEV

Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/15
Reported-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/518008/
Link: https://lore.kernel.org/r/20230112001600.12791-2-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: switch to DRM_PANEL_BRIDGE

Currently the DSI driver has two separate paths: one if the next device
in a chain is a bridge and another one if the panel is connected
directly to the DSI host. Simplify the code path by using panel-bridge
driver (already selected in Kconfig) and dropping support for
handling the panel directly.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/493608/
Link: https://lore.kernel.org/r/20220712132258.671263-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: Remove the unneeded result variable

Return the value msm_dsi_phy_enable() directly instead of storing it in
another redundant variable.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/499621/
Link: https://lore.kernel.org/r/20220826072821.253150-1-ye.xingchen@zte.com.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: don't powerup at modeset time for parade-ps8640

Commit 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset
time") caused sc7180 Chromebooks that use the parade-ps8640 bridge
chip to fail to turn the display back on after it turns off.

Unfortunately, it doesn't look easy to fix the parade-ps8640 driver to
handle the new power sequence. The Linux driver has almost nothing in
it and most of the logic for this bridge chip is in black-box firmware
that the bridge chip uses.

Also unfortunately, reverting the patch will break "tc358762".

The long term solution here is probably Dave Stevenson's series [1]
that would give more flexibility. However, that is likely not a quick
fix.

For the short term, we'll look at the compatible of the next bridge in
the chain and go back to the old way for the Parade PS8640 bridge
chip. If it's found that other bridge chips also need this workaround
then we can add them to the list or consider inverting the
condition. However, the hope is that the framework will not take too
much longer to land and we won't have to add anything other than
ps8640 here.

[1] https://lore.kernel.org/r/cover.1646406653.git.dave.stevenson@raspberrypi.com

Fixes: 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset time")
Suggested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220513131504.v5.1.Ia196e35ad985059e77b038a41662faae9e26f411@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: add mode valid callback for dsi_mgr

Add a mode valid callback for dsi_mgr for checking mode being valid in
case of DSC. For DSC the height and width needs to be multiple of slice,
so we check that here

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/480930/
Link: https://lore.kernel.org/r/20220406094031.1027376-13-vkoul@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: properly add and remove internal bridges

Add calls to drm_bridge_add()/drm_bridge_remove() DRM bridges created by
the driver. This fixes the following warning.

WARNING: CPU: 0 PID: 1 at kernel/locking/mutex.c:579 __mutex_lock+0x840/0x9f4
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc1-00002-g3054695a0d27-dirty #55
Hardware name: Generic DT based system
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from __warn+0xc8/0x1e8
__warn from warn_slowpath_fmt+0x78/0xa8
warn_slowpath_fmt from __mutex_lock+0x840/0x9f4
__mutex_lock from mutex_lock_nested+0x1c/0x24
mutex_lock_nested from drm_bridge_hpd_enable+0x2c/0x84
drm_bridge_hpd_enable from msm_hdmi_modeset_init+0xc0/0x21c
msm_hdmi_modeset_init from mdp4_kms_init+0x53c/0x90c
mdp4_kms_init from msm_drm_bind+0x514/0x698
msm_drm_bind from try_to_bring_up_aggregate_device+0x160/0x1bc
try_to_bring_up_aggregate_device from component_master_add_with_match+0xc4/0xf8
component_master_add_with_match from msm_pdev_probe+0x274/0x350
msm_pdev_probe from platform_probe+0x5c/0xbc
platform_probe from really_probe.part.0+0x9c/0x290
really_probe.part.0 from __driver_probe_device+0xa8/0x13c
__driver_probe_device from driver_probe_device+0x34/0x10c
driver_probe_device from __driver_attach+0xbc/0x178
__driver_attach from bus_for_each_dev+0x74/0xc0
bus_for_each_dev from bus_add_driver+0x160/0x1e4
bus_add_driver from driver_register+0x88/0x118
driver_register from do_one_initcall+0x6c/0x334
do_one_initcall from kernel_init_freeable+0x1bc/0x220
kernel_init_freeable from kernel_init+0x18/0x12c
kernel_init from ret_from_fork+0x14/0x2c

Fixes: 3d3f8b1f8b62 ("drm/bridge: make bridge registration independent of drm flow")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/481778/
Link: https://lore.kernel.org/r/20220411234953.2425280-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Use connector directly in msm_dsi_manager_connector_init()

The member 'msm_dsi->connector' isn't assigned until
msm_dsi_manager_connector_init() returns (see msm_dsi_modeset_init() and
how it assigns the return value). Therefore this pointer is going to be
NULL here. Let's use 'connector' which is what was intended.

Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: 6d5e78406991 ("drm/msm/dsi: Move dsi panel init into modeset init path")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/478693/
Link: https://lore.kernel.org/r/20220318000731.2823718-1-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: move DSI host powerup to modeset time

The DSI subsystem does not fully fall into the pre-enable/enable system
of callbacks, since typically DSI device bridge drivers expect to be
able to communicate with DSI devices at the pre-enable() callback. The
reason is that for some DSI hosts enabling the video stream would
prevent other drivers from sending DSI commands. For example see the
panel-bridge driver, which does drm_panel_prepare() from the
pre_enable() callback (which would be called before our pre_enable()
callback, resulting in panel preparation failures as the link is not yet
ready).

Therewere several attempts to solve this issue, but currently the best
approach is to power up the DSI link from the mode_set() callback,
allowing next bridge/panel to use DSI transfers in the pre_enable()
time. Follow this approach.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211207222901.988484-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: reduce usage of round_pixclk callback

The round_pixclk() callback returns different rate only on MDP4 in HDMI
(DTV) case. Stop using this callback in other cases to simplify
mode_valid callbacks.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220106070656.482882-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: fix initialization in the bonded DSI case

Commit 739b4e7756d3 ("drm/msm/dsi: Fix an error code in
msm_dsi_modeset_init()") changed msm_dsi_modeset_init() to return an
error code in case msm_dsi_manager_validate_current_config() returns
false. However this is not an error case, but a slave DSI of the bonded
DSI link. In this case msm_dsi_modeset_init() should return 0, but just
skip connector and bridge initialization.

To reduce possible confusion, drop the
msm_dsi_manager_validate_current_config() function, and specif 'bonded
&& !master' condition directly in the msm_dsi_modeset_init().

Fixes: 739b4e7756d3 ("drm/msm/dsi: Fix an error code in msm_dsi_modeset_init()")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211125180114.561278-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: stop setting clock parents manually

There is no reason to set clock parents manually, use device tree to
assign DSI/display clock parents to DSI PHY clocks. Dropping this manual
setup allows us to drop repeating code and to move registration of hw
clock providers to generic place.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20211006204828.1218225-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: untangle cphy setting from the src pll setting

Move DPHY/CPHY setting from msm_dsi_host_set_src_pll() to new function
msm_dsi_host_set_phy_mode().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20211006204828.1218225-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: Adjust probe order

Switch to the documented order dsi-host vs bridge probe.

Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-22-maxime@cerno.tech

drm/msm/dsi: do not enable irq handler before powering up the host

The DSI host might be left in some state by the bootloader. If this
state generates an IRQ, it might hang the system by holding the
interrupt line before the driver sets up the DSI host to the known
state.

Move the request_irq into msm_dsi_host_init and pass IRQF_NO_AUTOEN to
it. Call enable/disable_irq after msm_dsi_host_power_on/_off()
functions, so that we can be sure that the interrupt is delivered when
the host is in the known state.

It is not possible to defer the interrupt enablement to a later point,
because drm_panel_prepare might need to communicate with the panel over
the DSI link and that requires working interrupt.

Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20211002010830.647416-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: Support NO_CONNECTOR bridges

For now, since we have a mix of bridges which support this flag, which
which do *not* support this flag, or work both ways, try it once with
NO_CONNECTOR and then fall back to the old way if that doesn't work.
Eventually we can drop the fallback path.

v2: Add missing drm_connector_attach_encoder() so display actually comes
up when the bridge properly handles the NO_CONNECTOR flag

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210920225801.227211-2-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: add continuous clock support for 7nm PHY

Unlike previous generations, 7nm PHYs are required to collaborate with
the host for continuos clock mode. Add changes neccessary to enable
continuous clock mode in the 7nm DSI PHYs.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210805170817.3337665-1-dmitry.baryshkov@linaro.org
[Fix merge conflict, and $description typo]
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: stop calling set_encoder_mode callback

None of the display drivers now implement set_encoder_mode callback.
Stop calling it from the modeset init code.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210717124016.316020-7-dmitry.baryshkov@linaro.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: add three helper functions

Add three helper functions to be used by display drivers for setting up
encoders.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210717124016.316020-3-dmitry.baryshkov@linaro.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: rename dual DSI to bonded DSI

We are preparing to support two independent DSI hosts in the DSI/DPU
code. To remove possible confusion (as both configurations can be
referenced as dual DSI) let's rename old "dual DSI" (two DSI hosts
driving single device, with clocks being locked) to "bonded DSI".

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210717124016.316020-2-dmitry.baryshkov@linaro.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[DB: add one extra hunk added by one previous patches]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: add support for dsi test pattern generator

During board bringups its useful to have a DSI test pattern
generator to isolate a DPU vs a DSI issue and focus on the relevant
hardware block.

To facilitate this, add an API which triggers the DSI controller
test pattern. The expected output is a rectangular checkered pattern.

This has been validated on a single DSI video mode panel by calling it
right after drm_panel_enable() which is also the ideal location to use
this as the DSI host and the panel have been initialized by then.

Further validation on dual DSI and command mode panel is pending.
If there are any fix ups needed for those, it shall be applied on top
of this change.

Changes in v2:
- generate the new dsi.xml.h and update the bitfield names

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/1626922232-29105-2-git-send-email-abhinavk@codeaurora.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: drop msm_dsi_phy_get_shared_timings

Instead of fetching shared timing through an extra function call, get
them directly from msm_dsi_phy_enable.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210709210729.953114-9-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: do not enable PHYs when called for the slave DSI interface

Move the call to dsi_mgr_phy_enable after checking whether the DSI
interface is slave, so that PHY enablement happens together with the
host enablement.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210609211211.2561090-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: print error code when MIPI DSI host registration fails

In order to ease debugging of DSI host registration issues, print return
code of dsi_mgr_setup_components().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: stop passing src_pll_id to the phy_enable call

Phy driver already knows the source PLL id basing on the set usecase and
the current PLL id. Stop passing it to the phy_enable call. As a
reminder, dsi manager will always use DSI 0 as a clock master in a slave
mode, so PLL 0 is always a clocksource for DSI 0 and it is always a
clocksource for DSI 1 too unless DSI 1 is used in the standalone mode.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210331105735.3690009-25-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: make save/restore_state phy-level functions

Morph msm_dsi_pll_save/restore_state() into msm_dsi_phy_save/restore_state(),
thus removing last bits of knowledge about msm_dsi_pll from dsi_manager.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Link: https://lore.kernel.org/r/20210331105735.3690009-14-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: push provided clocks handling into a generic code

All MSM DSI PHYs provide two clocks: byte and pixel ones.
Register/unregister provided clocks from the generic place, removing
boilerplate code from all MSM DSI PHY drivers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Link: https://lore.kernel.org/r/20210331105735.3690009-11-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm: Remove unnecessary drm_panel_attach and drm_panel_detach

These functions are now empty and no longer
useful so remove the functions and their uses.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Bernard Zhao <bernard@vivo.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>,
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Icenowy Zheng <icenowy@aosc.io>,
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: dri-devel@lists.freedesktop.org,
Cc: linux-kernel@vger.kernel.org
Cc: opensource.kernel@vivo.com
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> # Fixed build and a few warnings
Link: https://patchwork.freedesktop.org/patch/msgid/9e13761020750b1ce2f1fabee23ef6e2a2942882.camel@perches.com

drm/bridge: Extend bridge API to disable connector creation

Most bridge drivers create a DRM connector to model the connector at the
output of the bridge. This model is historical and has worked pretty
well so far, but causes several issues:

- It prevents supporting more complex display pipelines where DRM
connector operations are split over multiple components. For instance a
pipeline with a bridge connected to the DDC signals to read EDID data,
and another one connected to the HPD signal to detect connection and
disconnection, will not be possible to support through this model.

- It requires every bridge driver to implement similar connector
handling code, resulting in code duplication.

- It assumes that a bridge will either be wired to a connector or to
another bridge, but doesn't support bridges that can be used in both
positions very well (although there is some ad-hoc support for this in
the analogix_dp bridge driver).

In order to solve these issues, ownership of the connector should be
moved to the display controller driver (where it can be implemented
using helpers provided by the core).

Extend the bridge API to allow disabling connector creation in bridge
drivers as a first step towards the new model. The new flags argument to
the bridge .attach() operation allows instructing the bridge driver to
skip creating a connector. Unconditionally set the new flags argument to
0 for now to keep the existing behaviour, and modify all existing bridge
drivers to return an error when connector creation is not requested as
they don't support this feature yet.

The change is based on the following semantic patch, with manual review
and edits.

@ rule1 @
identifier funcs;
identifier fn;
@@
struct drm_bridge_funcs funcs = {
...,
.attach = fn
};

@ depends on rule1 @
identifier rule1.fn;
identifier bridge;
statement S, S1;
@@
int fn(
struct drm_bridge *bridge
+ , enum drm_bridge_attach_flags flags
)
{
... when != S
+ if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
+ DRM_ERROR("Fix bridge driver to make connector optional!");
+ return -EINVAL;
+ }
+
S1
...
}

@ depends on rule1 @
identifier rule1.fn;
identifier bridge, flags;
expression E1, E2, E3;
@@
int fn(
struct drm_bridge *bridge,
enum drm_bridge_attach_flags flags
) {
<...
drm_bridge_attach(E1, E2, E3
+ , flags
)
...>
}

@@
expression E1, E2, E3;
@@
drm_bridge_attach(E1, E2, E3
+ , 0
)

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com

drm/msm/dsi: save pll state before dsi host is powered off

Save pll state before dsi host is powered off. Without this change
some register values gets resetted.

Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm: msm: Fix return type of dsi_mgr_connector_mode_valid for kCFI

I was hitting kCFI crashes when building with clang, and after
some digging finally narrowed it down to the
dsi_mgr_connector_mode_valid() function being implemented as
returning an int, instead of an enum drm_mode_status.

This patch fixes it, and appeases the opaque word of the kCFI
gods (seriously, clang inlining everything makes the kCFI
backtraces only really rough estimates of where things went
wrong).

Thanks as always to Sami for his help narrowing this down.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Alistair Delva <adelva@google.com>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: freedreno@lists.freedesktop.org
Cc: clang-built-linux@googlegroups.com
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: Delay drm_panel_enable() until dsi_mgr_bridge_enable()

At the moment, the MSM DSI driver calls drm_panel_enable() rather early
from the DSI bridge pre_enable() function. At this point, the encoder
(e.g. MDP5) is not enabled, so we have not started transmitting
video data.

However, the drm_panel_funcs documentation states that enable()
should be called on the panel *after* video data is being transmitted:

The .prepare() function is typically called before the display controller
starts to transmit video data. [...] After the display controller has
started transmitting video data, it's safe to call the .enable() function.
This will typically enable the backlight to make the image on screen visible.

Calling drm_panel_enable() too early causes problems for some panels:
The TFT LCD panel used in the Samsung Galaxy Tab A 9.7 (2015) (APQ8016)
uses the MIPI_DCS_SET_DISPLAY_BRIGHTNESS command to control
backlight/brightness of the screen. The enable sequence is therefore:

drm_panel_enable()
drm_panel_funcs.enable():
backlight_enable()
backlight_ops.update_status():
mipi_dsi_dcs_set_display_brightness(dsi, bl->props.brightness);

The panel seems to silently ignore the MIPI_DCS_SET_DISPLAY_BRIGHTNESS
command if it is sent too early. This prevents setting the initial brightness,
causing the display to be enabled with minimum brightness instead.
Adding various delays in the panel initialization code does not result
in any difference.

On the other hand, moving drm_panel_enable() to dsi_mgr_bridge_enable()
fixes the problem, indicating that the panel requires the video stream
to be active before the brightness command is accepted.

Therefore: Move drm_panel_enable() to dsi_mgr_bridge_enable() to
delay calling it until video data is being transmitted.

Move drm_panel_disable() to dsi_mgr_bridge_disable() for similar reasons.
(This is not strictly required for the panel affected above...)

Tested-by: Jasper Korten <jja2000@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/panel: decouple connector from drm_panel

To facilitate moving connector creation to display drivers,
decouple the drm_connector from drm_panel.

This patch adds a connector argument to drm_panel_get_modes().

All users of drm_panel_get_modes() already had the connector
available, so updating users was trivial.

With this patch drm_panel no longer keeps a reference to the drm_connector.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@nxp.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Torsten Duwe <duwe@lst.de>
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Allison Randal <allison@lohutok.net>
Cc: Shayenne Moura <shayenneluzmoura@gmail.com>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-tegra@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-7-sam@ravnborg.org

drm/msm/dsi: Move setup_encoder to modeset_init

Now that the panel probe/setup is in the modeset path, we can call
dsi_manager_setup_encoder() in a common place for both internal and
external bridge setups.

Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-10-sean@poorly.run

drm/msm/dsi: Move dsi panel init into modeset init path

Since deferred probe from the modeset init path now works, we can move
the panel initialization from detect() into connector init. This
avoids doing work in detect() and hopefully will result in a more
deterministic boot sequence between devices with a dsi panel, and those
with an external bridge.

Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-9-sean@poorly.run

drm/msm/dsi: Use the new setup_encoder function in attach_dsi_device

Now that we have a function to call set_encoder_mode() for us, use it.

Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-8-sean@poorly.run

drm/msm/dsi: Simplify the logic in msm_dsi_manager_panel_init()

This patch moves things around a bit to be a little more readable and
pulls out the set_encoder_mode() call into its own function for later
use.

Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-7-sean@poorly.run

drm/msm/dsi: Pull out panel init code into function

Pull all of the panel init code out of detect() and put it in its own
function. This will be useful in future patches where it's moved from
detect().

Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-6-sean@poorly.run

drm/msm/dsi: Don't store dsi host mode_flags in msm_dsi

It's a bit dangerous to store the flags in msm_dsi since there's no way to
tell when they're populated. Fortunately the only place that uses them
is the same place that fills them. So just use a local variable and
delete the struct member.

Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-5-sean@poorly.run

drm/msm/dsi: Split mode_flags out of msm_dsi_host_get_panel()

We use the flags in more places than just get_panel, so split them out
into a separate function.

Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-4-sean@poorly.run

drm/msm/dsi: add protection against NULL dsi device

When panel probe happens after DSI probe, the DSI probe is deferred as
per current design. In the probe defer path dsi device is destroyed.
This NULL dsi device could be deferenced by the panel probe in the
mipi_dsi_attach path.

Check for NULL dsi device before accessing it.

Changes in v2:
- Add more comments on how this NULL pointer situation will be hit

Reported-by: Jeffrey Hugo <jhugo@codeaurora.org>
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 and
only version 2 as published by the free software foundation this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 294 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: bridge: Constify mode arguments to bridge .mode_set() operation

The mode and ajusted_mode passed to the bridge .mode_set() operation
should never be modified by the bridge (and are not in any of the
existing bridge drivers). Make them const to make this clear.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: msm: Cleanup drm_display_mode print str

This patch adjust the print string of drm_display_mode object
to remove drm_mode_object dependency in msm files.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/3e2dcd38c964061f245b0ae22186c71da06e9742.1547143069.git.shayenneluzmoura@gmail.com

drm/msm: dsi: Initialize msm_dsi->id to -1

Currently msm_dsi->id is initialized to 0 during kzalloc. If bind fails
for a secondary dsi device before its id can be properly set (such as
during dt parsing), the id will point to the primary dsi device, causing
its reference to be removed from dsi_manager's global (msm_dsim_glb)
array.

This patch initializes the id to -1 and checks for negative in the
manager cleanup.

Cc: Doug Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>

Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: set encoder mode for DRM bridge explicitly

Currently, DRM bridge for DPU relies on the default video
mode setting to set the encoder mode.

Add an explicit call to set the encoder mode for bridges.

Changes in v3:
- None

Reviewed-by: Archit Taneja <architt@codeauorora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Use one connector for dual DSI mode

Current DSI driver uses two connectors for dual DSI case even
though we only have one panel. Fix this by implementing one
connector/bridge for dual DSI use case. Use master DSI
controllers to register one connector/bridge.

Changes in v3:
- None

Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
[seanpaul removed unused local var causing a build warning]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: adjust dsi timing for dual dsi mode

For dual dsi mode, the horizontal timing needs
to be divided by half since both the dsi controllers
will be driving this panel. Adjust the pixel clock and
DSI timing accordingly.

Changes in v3:
- Added Archit's R-b
- Rebase on dsi cleanup set in msm-next

Cc: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm: drop _mode_ from remaining connector functions

Since there's very few callers of these I've decided to do them all in
one patch. With this the unecessarily long drm_mode_connector_ prefix
is gone from the codebase! The only exception being struct
drm_mode_connector_set_property, which is part of the uapi so can't be
renamed.

Again done with sed+some manual fixups for indent issues.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-8-daniel.vetter@ffwll.ch

drm: drop _mode_ from drm_mode_connector_attach_encoder

Again to align with the usual prefix of just drm_connector_. Again
done with sed + manual fixup for indent issues.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-7-daniel.vetter@ffwll.ch

drm/msm: Use drm_connector_has_possible_encoder()

Use drm_connector_has_possible_encoder() for checking
whether the encoder has an associated connector.

v2: Replace the drm_for_each_connector_encoder_ids() loop
with a simple drm_connector_has_possible_encoder() call

Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628131315.14156-9-ville.syrjala@linux.intel.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

drm/msm/dsi: correct DSI id bounds check during registration

Check DSI instance id argument against the proper boundary size
to protect against invalid configuration of the DSI id.

Signed-off-by: Lloyd Atkinson <latkinso@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: check for failure on retrieving pll in dsi manager

Make msm_dsi_pll_init consistently return an error code instead
of NULL when pll initialization fails so that later pll
retrieval can check against an error code. Add checks for these
failures after retrieval of src_pll to avoid invalid pointer
dereferences later in msm_dsi_pll_get_clk_provider.

Signed-off-by: Lloyd Atkinson <latkinso@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm: Nuke drm_atomic_helper_connector_dpms

It's dead code, the core handles all this directly now.

The only special case is nouveau and tda988x which used one function
for both legacy modeset code and -nv50 atomic world instead of 2
vtables. But amounts to exactly the same.

v2: Rebase over the panel/brideg refactorings in stm/ltdc.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Peter Senna Tschudin <peter.senna@collabora.com>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Yakir Yang <kuankuan.y@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Romain Perier <romain.perier@collabora.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Hai Li <hali@codeaurora.org>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-tegra@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: zain wang <wzz@rock-chips.com>
Cc: Baoyou Xie <baoyou.xie@linaro.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-8-daniel.vetter@ffwll.ch
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Archit Taneja <architt@codeaurora.org>
Tested-by: Philippe Cornu <philippe.cornu@st.com> (on stm)
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Vincent Abriou <vincent.abriou@st.com>

drm/msm/dsi: Fix bug in dsi_mgr_phy_enable

A recent commit introduces a bug in dsi_mgr_phy_enable. In the non
dual DSI mode, we reset the mdsi (master DSI) PHY. This isn't right
since master and slave DSI exist only in dual DSI mode. For the normal
mode of operation, we should simply reset the PHY of the DSI device
(i.e. msm_dsi) corresponding to the current bridge.

Usage of the wrong DSI pointer also resulted in a static checker
warning. That too is resolved with this fix.

Fixes: b62aa70a98c5 (drm/msm/dsi: Move PHY operations out of host)

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Fix bug in dsi_mgr_phy_enable

A recent commit introduces a bug in dsi_mgr_phy_enable. In the non
dual DSI mode, we reset the mdsi (master DSI) PHY. This isn't right
since master and slave DSI exist only in dual DSI mode. For the normal
mode of operation, we should simply reset the PHY of the DSI device
(i.e. msm_dsi) corresponding to the current bridge.

Usage of the wrong DSI pointer also resulted in a static checker
warning. That too is resolved with this fix.

Fixes: b62aa70a98c5 (drm/msm/dsi: Move PHY operations out of host)

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Move PHY operations out of host

Since DSI PHY has been a separate platform device, it should not
depend on the resources in host to be functional. This change is
to trigger PHY operations in manager, instead of host, so that
host and PHY can be completely separated.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Reset both PHYs before clock operation for dual DSI

In case of dual DSI, some registers in PHY1 have been programmed
during PLL0 clock's set_rate. The PHY1 reset called by host1 later
will silently reset those PHY1 registers. This change is to reset
and enable both PHYs before any PLL clock operation.

[Originally worked on by Hai Li <hali@codeaurora.org>. Fixed up
by Archit Taneja <architt@codeaurora.org>]

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Pass down use case to PHY

For some new types of DSI PHY, more settings depend on
use cases controlled by DSI manager. This change allows
DSI manager to setup PHY with a use case.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Return more timings from PHY to host

The DSI host is required to configure more timings calculated
in PHY. By introducing a shared structure, this change allows
more timing information passed from PHY to host.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: Set encoder's mode of operation using a kms func

The mdp5 kms driver currently sets up multiple encoders per interface
(INTF), one for each kind of mode of operation it supports.
We create 2 drm_encoders for DSI, one for Video Mode and the other
for Command Mode operation. The reason behind this approach could have
been that we aren't aware of the DSI device's mode of operation when
we create the encoders.

This makes things a bit complicated, since these encoders have to
be further attached to the same DSI bridge. The easier way out is
to create a single encoder, and make the DSI driver set its mode
of operation when we know what the DSI device's mode flags are.

Start with providing a way to set the mdp5_intf_mode using a kms
func that sets the encoder's mode of operation. When constructing
a DSI encoder, we set the mode of operation to Video Mode as
default. When the DSI device is attached to the host, we probe the
DSI mode flags and set the corresponding mode of operation.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: Construct only one encoder for DSI

We currently create 2 encoders for DSI interfaces, one for command
mode and other for video mode operation. This isn't needed as we
can't really use both the encoders at the same time. It also makes
connecting bridges harder.

Switch to creating a single encoder. For now, we assume that the
encoder is configured only in video mode. Later, the same encoder
would be usable in both modes.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm: bridge: Link encoder and bridge in core code

Instead of linking encoders and bridges in every driver (and getting it
wrong half of the time, as many drivers forget to set the drm_bridge
encoder pointer), do so in core code. The drm_bridge_attach() function
needs the encoder and optional previous bridge to perform that task,
update all the callers.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Stefan Agner <stefan@agner.ch> # For DCU
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # For atmel-hlcdc
Acked-by: Vincent Abriou <vincent.abriou@st.com> # For STI
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # For sun4i
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> # For hisilicon
Acked-by: Jyri Sarha <jsarha@ti.com> # For tilcdc
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-4-git-send-email-laurent.pinchart+renesas@ideasonboard.com

drm/msm: Centralize connector registration/unregistration

Move the drm_connector registration from the encoder(HDMI/DSI etc) drivers
to the msm platform driver. This will simplify the task of ensuring that
the connectors are registered only after the drm_device itself is
registered.

The connectors' destroy ops are made to use kzalloc instead of
devm_kzalloc to ensure that that the connectors can be successfully
unregistered when the msm driver module is removed. The memory for the
connectors is unallocated when drm_mode_config_cleanup() is called
during either during an error or during driver remove.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2

We currently use iommu allocated DMA buffers for sending DSI commands.
DSIv2 doesn't have a port connected to the MDP iommu. Therefore, it
can't use iommu allocated buffers to fetch DSI commands.

Use a regular contiguous DMA buffer if we are DSIv2.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Modify dsi manager bridge ops to work with external bridges

The dsi bridge ops call drm_panel functions to set up the connected
drm_panel. Add checks to make sure these aren't called when we're
connected to an external bridge.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Allow dsi to connect to an external bridge

There are platforms where the DSI output can be connected to another
encoder bridge chip (DSI to HDMI, DSI to LVDS etc).

Add support for external bridge support to the dsi driver. We assume that
the external bridge chip would be of the type drm_bridge. The dsi driver's
internal drm_bridge (msm_dsi->bridge) is linked to the external bridge's
drm_bridge struct.

In the case we're connected to an external bridge, we don't need to create
and manage a connector within our driver, it's the bridge driver's
responsibility to create one.

v2:
- Move the external bridge attaching stuff to dsi manager to make things
cleaner.
- Force the bridge to connect to a video mode encoder for now (the dsi
mode flags may have not been populated by modeset_init)

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Create a helper to check if there is a connected device

Create a helper msm_dsi_device_connected() which checks whether we have a
device connected to the dsi host or not. This check gets messy when we
have support external bridges too. Having an inline function makes it
more legible.

For now, the check only consists of msm_dsi->panel being non-NULL. Later,
this will check if we have an external bridge or not.

This helper isn't used in dsi_connector related code as that's specific
to only when a drm_panel is connected.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Refer to connected device as 'device' instead of 'panel'

We currently support only panels connected to dsi output. We're going to
also support external bridge chips now.

Change 'panel_node' to 'device_node' in the struct msm_dsi_host and
'panel_flags' to 'device_flags' in msm_dsi. This makes things sound a
bit more generic.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Save/Restore PLL status across PHY reset

Reset DSI PHY silently changes its PLL registers to reset status,
which will make cached status in clock driver invalid and result
in wrong output rate of link clocks. The current restore mechanism
in DSI PLL does not cover all the cases. This change is to recover
PLL status after PHY reset to match HW status with cached status
in clock driver.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Rename *dual panel* to *dual DSI*

The current term of *dual panel* in DSI driver code causes confusion.
It is supposed to indicate the panel using two DSI links. Rename it
to *dual DSI*.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Update source PLL selection in DSI PHY

The source PLL to be used by each DSI PHY should be decided by
DSI manager based on dual DSI information, while the register
programming to select PLL is different from one type of PHY to
another. This change adds the H/W difference to PHY configuration
and updates the interface between DSI manager and PHY.

With this change, PLL selection can be supported on different
targets.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dsi: Enable PLL driver in MSM DSI

This change activates PLL driver for DSI to work with
common clock framework.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: Attach assigned encoder to eDP and DSI connectors

drm_mode_connector_attach_encoder() function call is missing
during eDP and DSI connector initialization. As a result,
no encoder is returned by DRM_IOCTL_MODE_GETCONNECTOR system
call. This change is to fix this issue.

Signed-off-by: Hai Li <hali@codeaurora.org>

drm/msm: Initial add DSI connector support

This change adds the DSI connector support in msm drm driver.

v1: Initial change
v2:
- Address comments from Archit + minor clean-ups
- Rebase to not depend on msm_drm_sub_dev change [Rob's comment]
v3: Fix issues when initialization is failed

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>