drm/msm/dpu: use devres-managed allocation for HW blocks

Use devm_kzalloc to create HW block structure. This allows us to remove
corresponding kfree and drop all dpu_hw_*_destroy() functions as well as
dpu_rm_destroy(), which becomes empty afterwards.

Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570041/
Link: https://lore.kernel.org/r/20231201211845.1026967-7-dmitry.baryshkov@linaro.org

drm/msm/dpu: enable PINGPONG TE operations only when supported by HW

The DPU_PINGPONG_TE bit is set for all PINGPONG blocks on DPU < 5.0.
Rather than checking for the flag, check for the presense of the
corresponding interrupt line.

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/555541/
Link: https://lore.kernel.org/r/20230904020454.2945667-3-dmitry.baryshkov@linaro.org

drm/msm/dpu: Merge setup_- and enable_tearcheck pingpong callbacks

These functions are always called consecutively and are best bundled
together for simplicity, especially when the same structure of callbacks
will be replicated later on the interface block for INTF TE support.
The enable_tearcheck(false) case is now replaced with a more obvious
disable_tearcheck(), encapsulating the original register write with 0.

Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534217/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-20-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Move dpu_hw_{tear_check, pp_vsync_info} to dpu_hw_mdss.h

Now that newer SoCs since DPU 5.0.0 manage tearcheck in the INTF instead
of PINGPONG block, move the struct definition to a common file. Also,
bring in documentation from msm-4.19 techpack while at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
[Marijn: Also move dpu_hw_pp_vsync_info]
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534232/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-16-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Move autorefresh disable from CMD encoder to pingpong

This autorefresh disable logic in the physical command-mode encoder
consumes three callbacks to the pingpong block, and will explode in
unnecessary complexity when the same callbacks need to be called on the
interface block instead to accommodate INTF TE support. To clean this
up, move the logic into the pingpong block under a disable_autorefresh
callback, replacing the aforementioned three get_autorefresh,
setup_autorefresh and get_vsync_info callbacks.

The same logic will have to be replicated to the interface block when it
receives INTF TE support, but it is less complex than constantly
switching on a "has_intf_te" boolean to choose a callback.

Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534230/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-13-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Drop unused poll_timeout_wr_ptr PINGPONG callback

This callback was migrated from downstream when DPU1 was first
introduced to mainline, but never used by any component. Drop it to
save some lines and unnecessary confusion.

Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534215/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-12-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Pass catalog pointers in RM to replace for-loop ID lookups

The Resource Manager already iterates over all available blocks from the
catalog, only to pass their ID to a dpu_hw_xxx_init() function which
uses an _xxx_offset() helper to search for and find the exact same
catalog pointer again to initialize the block with, fallible error
handling and all.

Instead, pass const pointers to the catalog entries directly to these
_init functions and drop the for loops entirely, saving on both
readability complexity and unnecessary cycles at boot.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/533861/
Link: https://lore.kernel.org/r/20230418-dpu-drop-useless-for-lookup-v3-3-e8d869eea455@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: move struct dpu_hw_blk definition to dpu_hw_utils.h

There is little point in having a separate header just for a single
opaque struct definition. Drop it now and move the struct to the
dpu_hw_util.h header.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/488016/
Link: https://lore.kernel.org/r/20220601161349.1517667-5-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/disp/dpu1: Add support for DSC in pingpong block

In SDM845, DSC can be enabled by writing to pingpong block registers, so
add support for DSC in hw_pp

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/480914/
Link: https://lore.kernel.org/r/20220406094031.1027376-5-vkoul@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: use struct dpu_hw_merge_3d in dpu_hw_pingpong

Use struct dpu_hw_merge_3d pointer in struct dpu_hw_pingpong rather
than using struct dpu_hw_blk. This is the only user of dpu_hw_blk.id,
which will be cleaned in the next patch.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210515190909.1809050-4-dmitry.baryshkov@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dpu: Disable autorefresh in command mode

When a command mode display is used, it may be retaining the bootloader
configuration which, in most of the cases, enables the autorefresh
feature in order to keep the splash up.

Since there is no autorefresh management in this driver, wire up the
autorefresh ops in the dpu_hw_pingpong and disable the feature when
preparing for cmd commit: instead of disabling it when initializing
the command mode, this road was chosen as to open future possibility
of enabling and managing the autorefresh feature in the driver.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dpu: enable merge_3d support on sm8150/sm8250

Handle new merge_3d block setup in dpu encoder code. Pass correct mode
and id. Note, that merge_3d blocks are not handled via usual RM
reservation mechanism, as each merge_3d block is tied to two PPs, so by
reserving PP you get merge_3d automatically.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dpu: add support for dither block in display

This change enables dither block for primary interface
in display.

Enabled for 6bpc in the current version.

Changes in v1:
- Remove redundant error checks (Rob).

Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dpu: Refactor rm iterator

Make iterator implementation private, and add function to
query resources assigned to an encoder.

Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dpu: Mark various data tables as const

These structures look like a bunch of data tables that aren't going to
change after boot. Let's move them to the const RO section of memory so
that they can't be modified at runtime on modern machines.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 and
only version 2 as published by the free software foundation this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 294 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm/dpu: Remove unused functions

Remove some unused container_of() helper functions.

v3: No changes
v2: Retained still used helper functions in the name of readability

Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: Add SDM845 DPU support

SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a
top level wrapper consisting of Display Processing Unit (DPU) and
display peripheral modules such as Display Serial Interface (DSI)
and DisplayPort (DP).

MDSS functions essentially as a back-end composition engine. It blends
video and graphic images stored in the frame buffers and scans out the
composed image to a display sink (over DSI/DP).

The following diagram represents hardware blocks for a simple pipeline
(two planes are present on a given crtc which is connected to a DSI
connector):

MDSS
+---------------------------------+
| +-----------------------------+ |
| | DPU | |
| | +--------+ +--------+ | |
| | | SSPP | | SSPP | | |
| | +----+---+ +----+---+ | |
| | | | | |
| | +----v-----------v---+ | |
| | | Layer Mixer (LM) | | |
| | +--------------------+ | |
| | +--------------------+ | |
| | | PingPong (PP) | | |
| | +--------------------+ | |
| | +--------------------+ | |
| | | INTERFACE (VIDEO) | | |
| | +---+----------------+ | |
| +------|----------------------+ |
| | |
| +------|---------------------+ |
| | | DISPLAY PERIPHERALS | |
| | +---v-+ +-----+ | |
| | | DSI | | DP | | |
| | +-----+ +-----+ | |
| +----------------------------+ |
+---------------------------------+

The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs)
depends on SoC capabilities.

Overview of DPU sub-blocks:
---------------------------
* Source Surface Processor (SSPP):
Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are
capable of performing format conversion, scaling and quality improvement
for source surfaces.

* Layer Mixer (LM):
Blend source surfaces together (in requested zorder)

* PingPong (PP):
This block controls frame done interrupt output, EOL and EOF generation,
overflow/underflow control.

* Display interface (INTF):
Timing generator and interface connecting the display peripherals.

DRM components mapping to DPU architecture:
------------------------------------------
PLANEs maps to SSPPs
CRTC maps to LMs
Encoder maps to PPs, INTFs

Data flow setup:
---------------
MDSS hardware can support various data flows (e.g.):
- Dual pipe: Output from two LMs combined to single display.
- Split display: Output from two LMs connected to two separate
interfaces.

The hardware capabilities determine the number of concurrent data paths
possible. Any control path (i.e. pipeline w/i DPU) can be routed to any
of the hardware data paths. A given control path can be triggered,
flushed and controlled independently.

Changes in v3:
- Move msm_media_info.h from uapi to dpu/ subdir
- Remove preclose callback dpu (it's handled in core)
- Fix kbuild warnings with parent_ops
- Remove unused functions from dpu_core_irq
- Rename mdss_phys to mdss
- Rename mdp_phys address space to mdp
- Drop _phys from vbif and regdma binding names

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[robclark minor rebase]
Signed-off-by: Rob Clark <robdclark@gmail.com>