drm/msm/dpu: Drop enable and frame_count parameters from dpu_hw_setup_misr()

Drop the enable and frame_count parameters from dpu_hw_setup_misr() as they
are always set to the same values.

In addition, replace MISR_FRAME_COUNT_MASK with MISR_FRAME_COUNT as
frame_count is always set to the same value.

Fixes: 7b37523fb1d1 ("drm/msm/dpu: Move MISR methods to dpu_hw_util")
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/572009/
Link: https://lore.kernel.org/r/20231213-encoder-fixup-v4-2-6da6cd1bf118@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: use devres-managed allocation for HW blocks

Use devm_kzalloc to create HW block structure. This allows us to remove
corresponding kfree and drop all dpu_hw_*_destroy() functions as well as
dpu_rm_destroy(), which becomes empty afterwards.

Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570041/
Link: https://lore.kernel.org/r/20231201211845.1026967-7-dmitry.baryshkov@linaro.org

drm/msm/dpu: Pass catalog pointers in RM to replace for-loop ID lookups

The Resource Manager already iterates over all available blocks from the
catalog, only to pass their ID to a dpu_hw_xxx_init() function which
uses an _xxx_offset() helper to search for and find the exact same
catalog pointer again to initialize the block with, fallible error
handling and all.

Instead, pass const pointers to the catalog entries directly to these
_init functions and drop the for loops entirely, saving on both
readability complexity and unnecessary cycles at boot.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/533861/
Link: https://lore.kernel.org/r/20230418-dpu-drop-useless-for-lookup-v3-3-e8d869eea455@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: move struct dpu_hw_blk definition to dpu_hw_utils.h

There is little point in having a separate header just for a single
opaque struct definition. Drop it now and move the struct to the
dpu_hw_util.h header.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/488016/
Link: https://lore.kernel.org/r/20220601161349.1517667-5-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dpu: Add CRC support for DPU

Add CRC support to DPU, which is currently not supported by
this driver. Only supports CRC for CRTC for now, but will extend support
to other blocks later on.

Changes in v2:
- Added kfree() calls for return paths in dpu_crtc_get_crc()
- Propogated error code for dpu_crtc_get_crc()
- Renamed skip_count
- Removed dpu_crtc_is_valid_crc_source()
- Removed wait for commit in dpu_crtc_set_crc_source()
- Moved crc_source from struct dpu_crtc to struct dpu_crtc_state
- Moved CRC register constants from dpu_hw_util.h to dpu_hw_lm.c

Validated with IGT kms_pipe_crc_basic, and kms_cursor_crc

Test: kms_pipe_crc_basic
Subtests Passed:
- bad-source
- read-crc-pipe-A
- read-crc-pipe-A-frame-sequence
- nonblocking-crc-pipe-A
- nonblocking-crc-pipe-A-frame-sequence
- disable-crc-after-crtc-pipe-A[1]
- compare-crc-sanitycheck-pipe-A[1]
Rest skipped

Test: kms_cursor_crc
Subtests Passed:
- pipe-A-cursor-size-change
- pipe-A-cursor-alpha-opaque
- pipe-A-cursor-alpha-transparent
Subtests Failed:
- pipe-A-cursor-dpms
- pipe-A-cursor-*-onscreen
- pipe-A-cursor-*-offscreen
Rest skipped

Tested on Qualcomm RB3 (debian, sdm845), Qualcomm RB5 (debian, qrb5165)

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jessica Zhang <jesszhan@codeaurora.org>

[1] Skipped on RB5 due to issue related to DPMS. Planning to upload a
fix for this in the future.
Link: https://lore.kernel.org/r/20211019224822.25940-1-jesszhan@codeaurora.org

Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dpu: Mark various data tables as const

These structures look like a bunch of data tables that aren't going to
change after boot. Let's move them to the const RO section of memory so
that they can't be modified at runtime on modern machines.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 and
only version 2 as published by the free software foundation this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 294 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm/dpu: Further cleanups for static inline functions

Remove more static inline functions that are lightly used and/or
very simple and easy to build into the calling functions.

v3: Fix a nit from Sean Paul
v2: Removed another unused function from dpu_hw_lm.c and add back
dpu_crtc_get_client_type() since there was a question regarding
its usefulness.

Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dpu: remove debugfs support for misr

MISR support is the debug feature present in Snapdragon chipsets.
At the layer mixer and interfaces, MISR algorithm can generate CRC
signatures of the pixel data which can be used for validating
the frames generated. Since there are no clients for this feature,
strip down the support from the driver.

changes in v4:
- changed introduced in the series
changes in v5:
- update commit text with the need for the change(Sean)

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: Add SDM845 DPU support

SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a
top level wrapper consisting of Display Processing Unit (DPU) and
display peripheral modules such as Display Serial Interface (DSI)
and DisplayPort (DP).

MDSS functions essentially as a back-end composition engine. It blends
video and graphic images stored in the frame buffers and scans out the
composed image to a display sink (over DSI/DP).

The following diagram represents hardware blocks for a simple pipeline
(two planes are present on a given crtc which is connected to a DSI
connector):

MDSS
+---------------------------------+
| +-----------------------------+ |
| | DPU | |
| | +--------+ +--------+ | |
| | | SSPP | | SSPP | | |
| | +----+---+ +----+---+ | |
| | | | | |
| | +----v-----------v---+ | |
| | | Layer Mixer (LM) | | |
| | +--------------------+ | |
| | +--------------------+ | |
| | | PingPong (PP) | | |
| | +--------------------+ | |
| | +--------------------+ | |
| | | INTERFACE (VIDEO) | | |
| | +---+----------------+ | |
| +------|----------------------+ |
| | |
| +------|---------------------+ |
| | | DISPLAY PERIPHERALS | |
| | +---v-+ +-----+ | |
| | | DSI | | DP | | |
| | +-----+ +-----+ | |
| +----------------------------+ |
+---------------------------------+

The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs)
depends on SoC capabilities.

Overview of DPU sub-blocks:
---------------------------
* Source Surface Processor (SSPP):
Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are
capable of performing format conversion, scaling and quality improvement
for source surfaces.

* Layer Mixer (LM):
Blend source surfaces together (in requested zorder)

* PingPong (PP):
This block controls frame done interrupt output, EOL and EOF generation,
overflow/underflow control.

* Display interface (INTF):
Timing generator and interface connecting the display peripherals.

DRM components mapping to DPU architecture:
------------------------------------------
PLANEs maps to SSPPs
CRTC maps to LMs
Encoder maps to PPs, INTFs

Data flow setup:
---------------
MDSS hardware can support various data flows (e.g.):
- Dual pipe: Output from two LMs combined to single display.
- Split display: Output from two LMs connected to two separate
interfaces.

The hardware capabilities determine the number of concurrent data paths
possible. Any control path (i.e. pipeline w/i DPU) can be routed to any
of the hardware data paths. A given control path can be triggered,
flushed and controlled independently.

Changes in v3:
- Move msm_media_info.h from uapi to dpu/ subdir
- Remove preclose callback dpu (it's handled in core)
- Fix kbuild warnings with parent_ops
- Remove unused functions from dpu_core_irq
- Rename mdss_phys to mdss
- Rename mdp_phys address space to mdp
- Drop _phys from vbif and regdma binding names

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[robclark minor rebase]
Signed-off-by: Rob Clark <robdclark@gmail.com>